Used Müller-Mitteltal Lowbed Semitrailers for sale (260)

Condition: used, maximum load weight: 22,300 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 03/2008, loading space length: 9,000 mm, loading space width: 2,540 mm, loading space height: 950 mm, total width: 2,550 mm, Gross weight: 24,000kg / 30,000kg Unladen weight: 7,700kg Payload: 16,300kg / 22,300kg Overall length: 11,500mm Loading length: total 9,000mm / rear recess 1,000mm Width: 2,550mm / loading width 2,540mm Loading height: approx. 950mm Dksdpfxox Egxue Aa Rsg Further information - Hydraulic ramps, split, approx. 4,000mm long x 790mm wide - Ramps covered with rubber - Twin tires 235/75R17.5 - Gigant axles - Warning panels at front and rear - Large lashing package - Underrun protection - Toolboxes left, right, front - Rear support

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, * TRA-Kombi 24.0: ----Braking System: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Centre axle liftable ----Drawbar: Dodpfxetplv Ts Aa Rjkg * Pneumatically lowerable drawbar, 2,100 mm in length with 40 mm draw eye & height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin electrical connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Toolbox made of powder-coated sheet steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized sheet steel (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Rear plastic impact protection buffers * Mechanical drop-down rear supports ----Container / Low-loader Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roll-off containers * Steel floor with roller recesses in the bogie area * For roll-off container transport, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking as well as mechanically insertable stop angles at the front of the tracks * Load certification according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * 8 movable skip stops for lateral centering of the skips, front 4 stops inserted with pivoting stop ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tie-down equipment for positive and non-positive securing of the skips * 4 cloverleaf lashing points on each side and 1 pair of 13.4 t UVV lashing rings to the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 ----Ramps: * Welded anti-slip bead in the running rails of the loading ramp * 1 pair of aluminium approach ramps (16 t/pair) 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Tyres: * Tyres: 235/75 R17.5 ----Coupling Height: * Loaded coupling height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides & rear * Axles, turntable, drawbar and air tanks painted in black tone * Main frame hot-dip galvanized ----Additional Information: * Permissible gross weight of 27,000 kg technically possible * New vehicle without initial registration with manufacturer's warranty * Errors and intermediate sale reserved ----Delivery Time: * Available from week 20/2026

Condition: used, maximum load weight: 22,450 kg, overall weight: 31,000 kg, axle configuration: 2 axles, first registration: 03/2018, next inspection (TÜV): 05/2026, loading space length: 11,500 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,700 mm, Year of construction: 2018, Equipment: ABS, Whatsapp/Viber (German/English/Arabic): Whatsapp (German/English): ---- * Müller Mitteltal TS2 Profi Djdox Hcuwopfx Aa Rjkg * Hydraulic ramps * Steering axle * Winch * Platform 8m * Loading height approx. 90 cm * Total loading area 11.5 m * Unladen weight 8,550 kg * Container locking device at the front * Air suspension * Safety inspection (SP) 11/2026 * Technical inspection (TÜV) 05/2026 ## German semi-trailer from first owner ## Financing/Leasing/Hire purchase possible on request ---- Advertising/company logos on the vehicles may have been digitally removed from the pictures. ----Contact person via phone or WhatsApp: (German, English, Arabic) (German, English) ---- We look forward to your visit. To make your appointment as pleasant as possible, we ask you to schedule it in advance. ----Subject to errors, mistakes and prior sale. All information without guarantee, in particular regarding features and accessories.

Condition: used, maximum load weight: 29,300 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 02/2017, next inspection (TÜV): 09/2026, loading space length: 14,910 mm, loading space width: 2,520 mm, total width: 2,550 mm, total height: 3,700 mm, Equipment: ABS, Low-bed trailer, loading area length 5500 mm, extendable to 3000 mm wide, foldable widening panels, loading height approx. 630 mm, gooseneck dimensions (LxW) 3510x2485 mm, 400 mm high aluminum side walls, height difference between gooseneck and bed 845 mm, raised bed 4220 mm, rear slope 870 mm, front slope 880 mm, hydraulically operated, laterally adjustable loading ramps (LxW) 2800x800 mm, electro-hydraulic unit for hydraulic functions, NATO external jump-start socket, 8 heavy-duty lashing rings per side, 3 lashing brackets per side, rotating beacon, support winches, folding rear supports, extendable warning panels, ABS, EBS, BPW Eco axles, axles with hydraulic forced steering, drum brake system, air suspension with raising/lowering device. Vehicle may be decorated and/or labeled with advertising. Dksdpfoxvwb Ijx Aa Rjg Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we will gladly provide you with an offer from our partner workshops! Vehicle may be decorated and/or labeled with advertising. Our general terms and conditions of delivery and payment apply. We are happy to provide you with a financing or leasing offer for this item. Please contact us!

Condition: used, axle configuration: 3 axles, first registration: 09/2001, total length: 10,000 mm, total width: 2,510 mm, suspension: steel, Year of construction: 2001, Additional information : Brand: MÜLLER MITTELTAL Model: T 3 Structure: platform ( platform L=8400 / W=2510 / H=940 mm ) Year: 09.2001 Suspension: steel Brakes: drum Dimensions: L/W: 10000 mm / 2510mm Masses: full/empty: 24000 kg / 6100 kg = More information = Suspension: leaf suspension Dkodpfjuwvbqsx Aa Rjg Empty weight: 6.100 kg Carrying capacity: 17.900 kg GVW: 24.000 kg Please contact Andrei Somov, Mark Ševtšenko, Alejandro Goyeneche or Deniss Urmaker for more information

Condition: used, first registration: 06/2010, loading space length: 11,350 mm, loading space width: 2,500 mm, loading space height: 950 mm, - Steered axle - Remote control - Hydraulic ramps - Upper loading platform 3500 mm - Lower loading platform 7850 mm Dodpfxjx Dzn Ue Aa Rjkg

Condition: used, maximum load weight: 10,790 kg, overall weight: 14,400 kg, axle configuration: 2 axles, first registration: 01/2023, next inspection (TÜV): 10/2026, loading space length: 6,280 mm, loading space width: 2,480 mm, loading space height: 350 mm, Müller-Mitteltal Tandem Low Loader - Unladen weight: 3,610 kg - Permissible total weight: 14,400 kg - Tyres: 235/75 R17.5 - Twin wheels - Leaf-sprung suspension - Drum brakes - 40mm towing eye Dksdpfx Aaox Amrpo Rog - TÜV due: 04.2026 - SP inspection due: 10.2026 Subject to errors and prior sale. Internal vehicle number: 11564

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Centre axle liftable ----Drawbar: Dkedpfx Aaspk D Iie Rsg * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye & height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (tire pressure monitoring system) ----General Equipment: * Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Rear plastic bumper buffers * Mechanical drop supports at rear ----Container / Low Loader Area: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding roll-off containers * Steel floor with roller recesses in the bogie area * Suitable for transport of roll-off containers with lengths from 5,500 to 7,000 mm * Pneumatic 4-point clamp locking as well as mechanical plug-in stop angles at the front in the runways * Load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 removable skip stops for side-centering of skips, front 4 skip stops are pinned with floating stops ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for hooking in tensioning elements for friction-locked and positive load securing * 4 lashing brackets in cloverleaf design (side) and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld bead as anti-slip surface in the ramp run area * 1 pair of aluminum loading ramps (16 t / pair) 2,800 x 400 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment at rear) ----Tires: * Tires: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1003 mm ----Payload: * Payload: 18,900 kg ----Paintwork: * Reflective contour tape, side and rear * Axles, turntable, drawbar and air tanks painted in black * Hot-dip galvanized main frame ----Information: * Technically permissible gross weight of 27,000 kg * New vehicle without initial registration, comes with manufacturer's warranty * Subject to change and prior sale ----Delivery Time: * Available from calendar week 20/2026

Condition: used, maximum load weight: 22,450 kg, overall weight: 31,000 kg, axle configuration: 2 axles, first registration: 03/2018, next inspection (TÜV): 05/2026, loading space length: 11,500 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 3,700 mm, Year of construction: 2018, Equipment: ABS, Whatsapp/Viber (German/English/Arabic): Whatsapp (German/English): ---- * Müller Mitteltal TS2 Profi * Hydraulic ramps * Steering axle * Winch * Platform length: 8m * Loading height approx. 90cm * Total loading area: 11.5m * Unladen weight: 8,550kg * Front container locking system * Air suspension * Safety Inspection (SP): 11/2026 Dedpfex Hcuqox Aa Rekg * Technical Inspection (TÜV): 05/2026 ## German semi-trailer from first owner ## Financing/Leasing/Hire purchase available on request. ----Please note: Advertising or company logos on the vehicles may have been digitally removed from the pictures. ----Contact by phone or WhatsApp: (German, English, Arabic) (German, English) ----We look forward to your visit. To make your experience as pleasant as possible, please arrange an appointment in advance. ----Errors, omissions and prior sale excepted. All information without guarantee, especially regarding equipment and accessories.

Condition: used, empty load weight: 5,150 kg, maximum load weight: 12,850 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2007, loading space length: 7,550 mm, loading space width: 2,470 mm, loading space height: 600 mm, suspension: air, tire size: 235/75R17.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, BPW axles, turntable, air suspension, lift & lower function, ABS (anti-lock braking system), lashing eyes, container lock, underride protection, side aluminum protective guard, twin tires, storage box, pendulum flaps. Dsdox A H S Aopfx Aa Rekg Body: 2-axle flatbed trailer with aluminum side panels & twist-lock fastenings, 2x BPW axles, drum brakes! Loading height approx. 950mm! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors!

Condition: used, maximum load weight: 31,600 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 12/2001, Equipment: ABS, Vehicle identification number: WMM0000010046004 Unladen weight: 8,400 kg DE MOT (Hauptuntersuchung): due BPW Eco axles with drum brakes Leaf suspension Upper deck length: 2,500 mm - Loading height: 1,070 mm Djdpfxjwwd R Io Aa Rekg Lower deck length: 7,200 mm - Loading height: 885 mm Drawbar - 50 mm Hydraulic ramps, divided - Length 2,000 + 1,300 mm - Width 660 mm Support legs Tyres: 235/75 R 17.5 Modifications, prior sale and errors excepted. The description serves for general identification of the vehicle and does not constitute a warranty in the legal sense of the term. The description in the purchase contract is definitive. Our offer generally does not include a new technical inspection (TÜV). If a new inspection is required, we will be pleased to provide a quotation from our partner workshops! The vehicle may be stickered and/or labeled with advertisements. Our general terms and conditions of delivery and payment apply.

Condition: used, maximum load weight: 23,250 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 11/1992, loading space length: 9,550 mm, loading space width: 2,550 mm, loading space height: 900 mm, total width: 2,550 mm, total height: 3,450 mm, Year of construction: 1992, Equipment: ABS, WhatsApp MÜLLER MITTELTAL Low Loader Trailer T 3 24.0 (30.0) Gross permissible weight: 24,000 kg (technical max. 30,000 kg) Unladen weight: 6,750 kg Payload: 23,250 kg Equipment: - One-piece loading ramps (approx. 2,600 x 700 mm), laterally adjustable - Loading platform above slewing ring: approx. 3,100 x 2,480 mm (loading height 1,000 mm) - Unladen loading height approx. 900 mm - Rear loading platform: approx. 5,600 x 2,500 mm - Steel plate overlay in rear area screwed onto wooden floor (1,500 x 750 mm) - Ramp lifter with tension spring - 4S3M WABCO ABS - Mechanical spindle handbrake - SAF drum brake axles, 3 x 10 t - Parabolic springs, mechanical rear axle equalisation - 12 radial tyres, size 235/75R17.5 (approx. 50-80%) - Side underrun protection - Without extension package - Lighting system 24V - Rear swing supports on ramps - Drawbar/drawbar scissors with 50 mm towing eye and height adjustment via tension spring and turnbuckle - Spare drawbar/drawbar scissors with 40 mm towing eye, supplied loose - 7+7 pin trailer power connector - Various lashing rings left & right (see photos) - Paint: RAL 2001 Red-Orange - Tyre condition approx. 85% Dsdpfx Aaexz Uuio Rskg - Condition: GOOD for age and mileage! All information subject to change! NOTE: PRICE IS NET PLUS VAT German, English: JOSEF WhatsApp: We speak the following languages: German, Czech, Polish, Romanian, Russian, English.

Condition: used, axle configuration: 2 axles, first registration: 03/2004, Year of construction: 2004, Equipment: ABS, = Additional options and accessories = - EBS = More information = Empty weight: 4.850 kg Carrying capacity: 13.150 kg GVW: 18.000 kg Tyre tread remainder on axle rear: 60% Suspension on axle rear: air Dksdexyx Haepfx Aa Rjg

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear Dedpfepk D Awex Aa Rjkg ----Axles: * 3 x 11 t Gigant axles * Center axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye & height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin electrical connector * TPMS (Tire Pressure Monitoring System) ----General Equipment: * Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear bump stops * Mechanical drop down stands at rear ----Container / Low Loader Deck: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) to guide the roll-off containers * Steel sheet floor with roller recesses in the bogie area * For roll-off container transport, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking as well as mechanical plug-in stops at the front in the running rails * Load certificate according to DIN 30722-1 * Transportation of up to 2 skip containers with a maximum of 10 m³ volume possible * Includes 8 repositionable skip stops for lateral centering of skips, front 4 skip stops plug-in with pendulum-mounted stop ----Load securing: * 3 pairs of 10 t UVV lashing rings at the sides for attaching tensioning elements for positive and non-positive securing of the skips * 4 side lashing bars in cloverleaf design and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld beads as anti-slip surface on the approach ramp running rail * 1 pair of aluminium approach ramps (16 t / pair), 2,800 x 400 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment from the rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides and rear * Axles, turntable, drawbar and air tank painted in black tone * Hot-dip galvanized main frame ----Info: * Technically permissible total weight of 27,000 kg possible * New vehicle, unregistered, with manufacturer warranty * Subject to prior sale and errors excepted ----Delivery time: * Available from week 20/2026

Condition: used, maximum load weight: 5,000 kg, overall weight: 7,200 kg, axle configuration: 2 axles, first registration: 04/1979, Year of construction: 1979, 3-way tipper trailer, 80 km/h version, dual-circuit compressed air brake system, rear towing hitch with hydraulic connection and brake couplings for an additional trailer. Steel drop sides. According to the owner, the trailer is in good, fully functional condition! Sold as is, without TÜV, on behalf of the customer. Cash price €4,500.00. Djdpfxexzzgle Aa Rjkg

Condition: used, maximum load weight: 26,600 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2004, next inspection (TÜV): 08/2025, loading space length: 12,600 mm, loading space width: 2,500 mm, loading space height: 900 mm, total width: 2,520 mm, Müller Mitteltal 3 axle semi-trailer low loader Total weight: 35,000kg technically 41,000 kg Empty weight: 8,400kg Payload: 26,600kg technically 32,600 kg Total length: 13,700mm Loading length: total 12,600mm, gooseneck approx. 2,700mm/ roller slope approx. 1,400mm/ low bed approx. 8,500mm Width: 2,520mm Loading height: approx. 900mm Further information - Side walls gooseneck foldable Djdpfjwtlkhox Aa Rjkg - Tool box at the front 600mm - Spare wheel bulkhead - Last axle with caster steering - Air suspension - Split long ramps (2,300mm + 1,500mm), hydraulic. Side shift - BPW axles - Warning signs front + rear - Roller slope/gooseneck slope Other new and used low loader semi-trailers available. More information at

Condition: used, maximum load weight: 8,750 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 06/2024, total width: 2,550 mm, Year of construction: 2023, Müller Mitteltal KA-TA-R 11.9 tandem 3-way tipper with lots of extras. Total weight: 11,900kg Standard payload approx.: 8,750kg Clear dimensions: 5,000x2,420x500mm Tires: 385/55R19.5 4-layer paintwork, single color Wheels: silver Chassis/underbody protection: hot-dip galvanized Platform with bulkhead: hot-dip galvanized Axles/springs/fuel tank etc.: black Side and rear wall: RAL 2011 deep orange Reinforced and certified structure in accordance with EN 12642 XL including load securing certificate. (Only in conjunction with 500mm high steel side walls). Rear stanchions screwed, hot-dip galvanized, without top coat. Lashing points LC 5,000 daN recessed at the front. Net hooks integrated at the side and rear in the bearings of the central locking system to the base side wall and 2 additional pieces on the front wall. BPW axles instead of GIANT tipping platform with permanently attached front wall in hot-dip galvanized design, with screwed, galvanized rear stanchions, without additional coating (not with HARDOX floor). Due to the system, the formation of waves during hot-dip galvanization, especially with the large floor panel, cannot be ruled out; complaints in this regard are excluded from the warranty. Tires 385/55R19.5 instead of 235/75R17.5 (floor and coupling height + approx. 110 mm, Code 08.940 ramp length 3,570 mm required). 1 plastic tool box, black, lockable, W=750xH=350xD=300mm (45kg payload with even load), arrangement: on the chassis frame on the right in the direction of travel. 1 pair of aluminum docking ramps without fairway (8 t/pair), 3,570x400x105mm, suitable for rubber-tired and tracked vehicles, 55 kg/each. Two-step access in front of the front wall, on the left in the direction of travel (hot-dip galvanized). Extended connecting lines for agricultural and forestry tractors. Further information Dsdpfxjvy Tvtj Aa Rskg New: No

Condition: used, maximum load weight: 14,300 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 07/2023, next inspection (TÜV): 11/2026, Year of construction: 2023, * Wabco EBS-E braking system * Emergency release device for spring brake cylinders * Drum brakes * Duomatic brake connector * 2 x SAF axles * Air suspension with lowering function via radio remote control * 1st axle as lift axle (fully automatic) * Lift axle with +30 mm driving height adjustment via actuating cylinder * Starting aid for shunting purposes and forced lowering on the first axle – controlled via speed-dependent EBS electronics – (no truck-side installation required, additional cable for operation from the tractor) * 50 mm flanged bolt towing eye – height-adjustable by +77 mm and -33 mm – for 2 t vertical load * BPW landing gear at the front * 15-pin power connector * 3-pin 12V auxiliary connector * LED lighting system 12/24V * 2 LED reversing lights switched via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connection lines for agricultural and forestry vehicles * Radio power supply 12+24 V via tail light * Mechanically extendable underride guard for container lengths over 6,000 mm * Speedline diamond-cut aluminum rims * Pin-type towing coupling (use only with retracted underride guard) * Enclosed plastic half-shell single mudguards * Two-step access step in front of the front wall on the left side * Shovel and broom holder in front of the front wall * 2 stainless steel toolboxes – matte – approx. 650 x 350 x 320 mm, right side * Enclosed side underrun protection which can also be used as advertising space * 2-circuit hydraulic connections (engine-side from truck/tractor) rated for 180 bar (tractor operation) * Double-acting hydraulic circuit for hydraulic tailgate (mounted on the right in driving direction), controlled via radio remote * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (Serial No. 100746129, year of manufacture 2023) Dkodpfx Aaox Dp Atj Rjg * Base frame made of high-strength fine-grain steel * 20,000 kg pulling force * Hook height 1,570 mm * Hooklift control via radio remote * Radio remote with fast offloading function, but not for loading * Emergency stop switch on both left and right sides * Container mountings with 4 side supports each and 1 roller at the rear * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist main arm lifting * 2 x mechanical rear support legs (drop-type) * Type approved for 20 t gross weight (2 x 9 t axles) and 2 t vertical load * Unladen loading height approx. 1,300 mm with lift axle lowered * Note: If the radio remote is outside the cradle, the service brake must be engaged in order to unlock the radio function. The brake connectors must remain connected at all times so the hydraulic/pneumatic control valves can be opened * Underrun guard monitoring system to ensure it is retracted during tipping * Chassis, drawbar, access step, underride guard, and support legs hot-dip galvanized * Axles, air tanks, front landing gear painted black * Palfinger hooklift painted black/yellow * Subject to errors and prior sale * Vehicle is in very good / as-new condition * Vehicle is immediately available

Condition: used, maximum load weight: 14,300 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 07/2023, next inspection (TÜV): 11/2026, Year of construction: 2023, * Wabco EBS-E braking system * Emergency release device for spring brake cylinders * Drum brakes * Duomatic brake connection * 2 x SAF axles rated at 2 tons * Air suspension with lowering function via wireless remote control * First axle as a lift axle (fully automatic) * Lift axle ride height adjustable: +30 mm via adjustment cylinder * Start-assist for maneuvering and forced lowering on the first axle – controlled via speed-dependent EBS electronics (no installation required on truck side, additional cable for tractor operation included) * 50 mm flanged drawbar eye – height-adjustable by +77 mm and -33 mm – for 2 ton vertical load * BPW front support winch * 15-pin electrical connector * 3-pin 12V auxiliary connector * LED lighting system 12 / 24V * 2 LED reversing lights controlled by reverse gear * EBS multi-voltage unit for towing vehicles with 12 & 24V electrics * Extended connection cables for agricultural and forestry vehicles * Wireless system power supply 12+24 V via tail light * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond aluminum rims * Pin-type towing coupling (use only when underrun protection is retracted) * Closed plastic single mudguards (half-shell design) * Two-step access ahead of bulkhead, left side (facing direction of travel) * Shovel and broom holder mounted in front of bulkhead * 2 stainless steel toolboxes – matte – approx. 650 x 350 x 320 mm, right side * Enclosed side underrun protection usable as advertising space * Dual-circuit hydraulic connections (engine side of truck/tractor) rated for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted right front) with operation via remote control * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (serial no. 100746129, year 2023) * Base frame constructed of high-strength fine-grain steel * 20,000 kg tractive force * Hook height: 1,570 mm * Hooklift operated via wireless remote control * Remote with fast function for lowering, not for lifting * Emergency stop switches on left and right sides * Container supports with 4 lateral mounts each side, plus 1 rear roller per side * Hydraulic rear internal locking * 2 additional hydraulic cylinders to support main arm lifting Dkjdpfjx Dp Amox Aa Rog * 2 x mechanical fall supports at rear * Certified for 20 ton gross weight (2 x 9 ton axles) and 2 ton vertical load * Unladen loading height approx. 1,300 mm with lowered lift axle * Note: If the wireless remote is outside its cradle, the service brake must be activated to enable wireless function. Brake connections must remain permanently attached for the hydraulic/pneumatic valves to operate. * Underrun protection monitoring system to ensure retraction for tipping operations * Chassis, drawbar, access steps, underrun protection, and fall supports are hot-dip galvanized * Axles, air tanks, front support winch painted in black * Palfinger hooklift painted black/yellow * Subject to errors and prior sale * Vehicle is in very good / as-new condition * Vehicle is immediately available

Condition: used, maximum load weight: 14,300 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 07/2023, next inspection (TÜV): 11/2026, Year of construction: 2023, * Wabco EBS-E braking system * Emergency release device for spring brake cylinders * Drum brakes * Duomatic brake connection * 2 x SAF axles * Air suspension with lowering function via remote control * 1st axle as lift axle (fully automatic) * Lift axle with ride height adjustment +30 mm via actuator * Start-up aid for maneuvering purposes and forced lowering onto the first axle – controlled via speed-dependent EBS electronics – (without truck-side installation; includes cable for operation from the tractor) * 50 mm flange-mounted towing eye – height adjustable by +77 mm and -33 mm – for 2 t vertical load * BPW landing gear at front * 15-pin power connector * 3-pin 12V auxiliary connector * LED lighting system 12 / 24V * 2 LED reversing lights activated via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connection cables for agricultural and forestry vehicles * Power supply for remote control 12+24 V via tail light * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond aluminum rims * Pin-type towing coupling (only for use when underrun protection is retracted) * Closed plastic half-shell individual mudguards * Two-step access in front of the bulkhead on the left * Shovel and broom holder in front of the bulkhead * 2 stainless steel toolboxes – matt finish – approx. 650 x 350 x 320 mm, mounted on the right side * Closed side protection usable as advertising space * 2-circuit hydraulic connections (engine side from truck/tractor) rated for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted on the right) with operation via remote control Djdpfxjx Dp Agj Aa Rokg * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (serial no. 100746129, year 2023) * Base frame made of high-strength fine-grained steel * 20,000 kg towing force * Hook height 1,570 mm * Hooklift operation via remote control * Remote control with quick function for tipping, but not for lifting * Emergency stop switches on both left and right sides * Container bearing with four lateral supports each side and one roller at the rear * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist main arm lifting * 2 x mechanical drop supports at the rear * Approval for 20 t gross weight (2 x 9 t axles) and 2 t vertical load * Unladen loading height approx. 1,300 mm with lowered lift axle * Note: If the remote control is outside the charging cradle, the service brake must be applied for the remote control to be activated. Brake connections must remain connected to enable the operation of the hydraulic/pneumatically controlled valves * Monitoring system for underrun protection to ensure it is retracted when tipping * Chassis, drawbar, access step, underrun protection, and drop supports hot-dip galvanized * Axles, air tanks, landing gear at front painted black * Palfinger hooklift painted black/yellow * Errors and prior sale excepted * Vehicle is in very good / as-new condition * Vehicle is immediately available

Condition: new, maximum load weight: 13,650 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, * TRA-Kombi 18.0: * RDÜ (Tire Pressure Monitoring), display possible in the truck via EBS signal (no truck-side installation required) * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 10.5-ton axles * Air suspension with manual lowering at the rear * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment * Tool box made of powder-coated sheet steel and spare wheel holder in basket design, mounted on the right side * Contour tape on sides and rear, reflective * Enclosed side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact buffers * Foldable A-sign at the rear * LED tail lights * 15-pin electrical connector * Hot-dip galvanized main frame with raised outer frame for guiding roll-off containers * Steel sheet floor with roll recesses in the bogie area * For roll-off container transport, container length from 5,500 to 7,000 mm possible * Pneumatic four-point clamp locking and mechanical plug-in front stop angles on the guide track * Load securing certificate according to DIN 30722-1 * 1 transport operation for up to 2 skip containers with max. 10 m³ volume possible * Includes 8 repositionable skip stops for lateral centering of skips; front 4 skip stops plugged in and with pivoting stops * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning devices for positive and non-positive securing of the skips; 4 lashing bars in cloverleaf design (on the sides) each and 1 pair of 13.4 t UVV lashing rings at the front * Load securing package with additional 4 x 8 t lashing rings each side, integrated into the outer frame * Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Weld bead as anti-slip coating in the ramp area of the inclined plane * Mechanical drop-down supports at the rear * Aluminium loading ramps (10.6 t / pair) 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment accessible from the rear) Dedpsl Tld Ijfx Aa Rekg * --Permissible gross vehicle weight technically possible: 20,000 kg-- * New vehicle without first registration, with manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Condition: new, maximum load weight: 13,650 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, * TRA-Kombi 18.0: * TPMS (Tire Pressure Monitoring System), display option in the truck via EBS signal (no truck-side installation required) * EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 10.5-ton axles * Air suspension with manual lowering at the rear * Pneumatically lowerable towing bar, 2,100 mm long with 40 mm towing eye and height adjustment device * Powder-coated steel toolbox and spare wheel holder in basket design mounted on the right side * Reflective contour tape on sides and rear * Enclosed side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact bumpers * Foldable A-sign at the rear * LED tail lights * 15-pin power connector * Hot-dip galvanized main frame with raised outer rails to guide roller containers * Steel floor with recessed rollers in the bogie area * For roll-off container transport, container lengths from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking system and mechanically insertable stop brackets at the front in the track * Load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Eight removable skip stops for lateral centering, the front four are pinned with pendulum stops Dkedpfxswb Rake Aa Reg * Three pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and friction-locked securing of the skips, four cloverleaf lashing bars each side, and one pair of 13.4 t UVV lashing rings at the front * Load securing package with additionally four 8 t lashing eyes each side integrated into the outer frame * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Weld bead as anti-slip coating in the ramp area * Mechanical drop supports at the rear * Aluminium approach ramps (10.6 t / pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) * --Permissible total weight technically possible: 20,000 kg-- * New vehicle without initial registration, with manufacturer’s warranty * Errors and prior sale excepted * Immediately available from Egestorf

Condition: new, maximum load weight: 13,650 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, * TRA-Kombi 18.0: * TPMS (Tire Pressure Monitoring System), display possible in the truck via EBS signal (no truck-side installation required) * EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 10.5 ton axles * Air suspension with manual lowering at the rear * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment device * Tool box made of powder-coated sheet steel, plus spare wheel holder in basket design on the right side * Reflective contour marking strips on the sides and rear * Closed side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact protection buffers * Foldable A-board at the rear * LED rear lights * 15-pin power connector * Hot-dip galvanized main frame with raised outer frame for guiding roll-off containers * Sheet steel floor with roller recesses in the bogie area * For roll-off container transport: container length from 5,500 to 7,000 mm possible * Pneumatic 4-point container locking system and mechanically insertable stop angles at the front on the track * Load securing certificate according to DIN 30722-1 * 1 transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 repositionable skip stops for lateral centering of skips, front 4 skip stops are plug-in with pivoting stops * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning devices for positive and non-positive securing of skips; 4 lashing cleats each in cloverleaf design (side) and 1 pair of 13.4 t UVV lashing rings at the front * Load securing package with an additional 4 x 8 t lashing eyes per side recessed into the outer frame * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 Dsdpfjl Tnwzox Aa Rokg * Weld seam as anti-slip surface in the ramp area of the approach slope * Mechanical drop-down supports at the rear * Aluminum loading ramps (10.6 t/pair) 2,800 x 470 mm suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) * --Permissible total weight technically possible: 20,000 kg-- * New vehicle without initial registration with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egstorf

Condition: new, maximum load weight: 6,110 kg, overall weight: 8,800 kg, axle configuration: 1 axle, Year of construction: 2025, * KWH 8.8 ML: Dedpou I Iqfsfx Aa Rekg * TPMS Tire Pressure Monitoring * EBS Braking System * Drum Brake * BPW Axle * Parabolic Springs * Support winch at the front * Spring-assisted square tube supports at the rear with base plate and safety locking pins for different support heights * Drawbar with 40 mm screw hitch eye (height adjustable mm) * 15-pin power plug * LED lighting * Flashing LED side marker lights * Chassis made from torsion-resistant square tubes and cross beams * Closed steel mudguards with splash protection * Closed lateral underrun protection usable as advertising space * Plastic toolbox with floor insert (horizontal installation) approx. 500 x 350 x 400 mm * Swiveling cable drum superstructure, clear width between the drum arms 1,700 mm with tension lock for securing the drum at the carrier arm ends, as well as locking of the cable drum superstructure to the chassis via a centrally arranged claw lock * Motor-hydraulic drum drive with oil motor * Valves and movable rubber-coated drive rollers * Hydraulic speed regulator and brake for drum drive * Steel drum shaft with 76 mm diameter, including centering and rotatable ends * 1 pair of stepped centering cones made of polyamide * Hydraulic pump unit with petrol engine * Fuel tank and hand starter * 13 hp with gear pump (150 bar) * 315/80 R 22.5 tires * 2,690 kg unladen weight * Vehicle is hot-dip galvanized * New vehicle with full manufacturer warranty * Errors and prior sale excepted * Immediately available from Egestorf

Condition: new, maximum load weight: 6,110 kg, overall weight: 8,800 kg, axle configuration: 1 axle, Year of construction: 2025, * KWH 8.8 ML: * RDÜ Tire Pressure Monitoring System * EBS braking system * Drum brake * BPW axle * Parabolic suspension Djdjxyniwspfx Aa Rskg * Front support winch * Spring-assisted square tube rear supports with base plate and safety locking pins for variable support heights * Towbar with 40 mm bolt-on towing eye (height adjustable mm) * 15-pin power connector * LED lighting * Flashing LED side marker lights * Chassis constructed from torsion-resistant square tubes and cross members * Closed steel mudguards with splash protection * Closed side underrun protection usable as advertising space * Plastic toolbox with base insert (horizontal installation), approx. 500 x 350 x 400 mm * Swiveling cable drum superstructure, clear width between drum arms 1,700 mm, with tension lock for securing the drum at the bearing arm ends as well as central claw lock for securing the cable drum superstructure to the chassis * Motor-hydraulic drum drive with oil motor * Valves and movable, rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter, with centering and rotating ends * 1 pair of polyamide centering cones, stepped design * Hydraulic supply and return lines * Structural and hydraulic preparation for retrofitting a separate motor * 315/80 R 22.5 tires * 2,690 kg unladen weight * Vehicle is hot-dip galvanized * New vehicle with full manufacturer’s warranty * Subject to errors and prior sale * Immediately available from Egestorf