Used Müller-Mitteltal Lowbed Semitrailers for sale (268)

Condition: used, maximum load weight: 5,900 kg, overall weight: 9,000 kg, axle configuration: 2 axles, first registration: 05/2020, loading space length: 5,370 mm, loading space width: 2,470 mm, loading space height: 400 mm, loading space volume: 5 m³, Equipment: ABS, * ABS * 5-chamber rear lights * Height-adjustable towing device Cjdoyncyhepfx Ak Tjrg * Gigant axles * Front landing gear ----Superstructure: Low-loader trailer, loading height approx. 870mm, rear sloped, access height approx. 780mm, spring-assisted steel side walls left and right, wooden floor, lashing eyes and lashing rings. Spring-assisted and laterally adjustable loading ramps with hot-dip galvanized grating, slip-resistant design (length approx. 2,600mm), automatic rear support coupled with ramp operation, plastic toolbox in front of the bulkhead. Chassis, front wall, drawbar, rear wall, ramps and stakes hot-dip galvanized. Sale to commercial customers only. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!! ALL INFORMATION PROVIDED WITHOUT GUARANTEE, INCLUDING EQUIPMENT AND ACCESSORIES. The basis for all purchase contracts, invoices, proforma invoices, orders, and sales discussions are our General Terms and Conditions (see legal notice).

Condition: used, overall weight: 13,500 kg, axle configuration: 2 axles, first registration: 02/2018, loading space length: 5,060 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2018, MUELLER MITTELTAL Crjdpfx Aey E Ecnek Tsg Anhänger ( KIPPER ) 5,06 m Imported / Accident-FREE IN VERY GOOD CONDITION! ? YEAR OF PRODUCTION: 2018 AIRSUSPENSION TIRE SIZE: 385/55R19,5 WHEELBASE: 115 PLATFORM: 506 x 242 x 50 m TOTAL WEIGHT: 13 500 kg CAPACITY: 10 000 kg TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ?????

Condition: new, maximum load weight: 29,850 kg, overall weight: 38,000 kg, axle configuration: 2 axles, loading space length: 8,000 mm, loading space width: 2,520 mm, Year of construction: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Last axle as a trailing steering axle with electro-pneumatic steering lock activated by PIN in reverse gear * Additional lock for the trailing axle, operable from the driver's cab for maneuvering purposes – without truck-side installation – assigned to PIN 10; the lock must be disengaged before driving on public roads ----Suspension: * Air suspension with lift and lower function and RtR (Ride to Reduce) function ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck's display via EBS signal – without truck-side installation * LED tail lights 12 / 24 V * Flashing side marker lights * LED reverse lights activated by reverse gear * SmartBoard installed as info tool with pressure sensors solely for total axle load display * 7-pin socket at the rear for illumination of overlength loads * LED beacon (removable) at the rear ----General Attachments: * Aluminum air tanks * Manual crank landing gears * Galvanized steel mudguards * Swivel arm as carrier for connection lines in front of the front bulkhead ----Warning Package: * Mechanically adjustable warning sign package Crodpfx Ajykx I Hek Tjg ----Lowbed Platform: * 50 mm thick flooring made from larch / Douglas fir instead of spruce / fir * Rear slope – 700 mm long – on the semi-trailer deck to the low bed with checker plate covering and at the end a perforated strip for attaching aluminum drive-on ramps * Tread plate cover over the wheels * SP combo package: toolbox with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum color, mounted on the semi-trailer platform approx. 2,480 x 500 mm * Hinged lid on top and side doors in the angled corners * Fold-down aluminum side boards, 500 mm high on the trailer platform, incl. foldable and removable rear stanchions * Plug-in aluminum rear wall, 150 mm high * 2nd kingpin position * Preparation for container locks * Preparation for 3 receiving pockets in the transition slope from lowbed to gooseneck * Preparation for retrofitting folding outriggers to achieve 3-meter width, including welded-in mounting brackets in the outer frame ----Load Securing: Semi-trailer platform: * 50 mm holes in the front corners and front for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed in the floor at the side near the approach slope * Perforated, 45°-bent outer frame with hole pattern for lashing equipment (2 t lashing points every 480 mm) * Each side with 2 x 6.3 t retractable lashing rings recessed in the outer frame Low-bed platform: * 2 x 16.5 t lashing rings recessed centrally just in front of the approach slope to the gooseneck * Each side with 3 pairs of 13.5 t and 5 pairs of 10 t retractable lashing rings recessed into the outer frame * Each side with 4 stake pockets recessed into the outer frame * Profifix lashing rail in the center longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From end of last rigid axle to end cross member B = 770 mm, D = 270 mm (each side with 2 x 6.4 t lashing rings welded in place in the excavator arm rest) ----Ramp: * Hydraulic one-piece "ALLTEC" aluminum drive-on ramps, approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t/pair) * Hydraulic ramp shifting on sliding tube of the ramp shaft ----Hydraulics: * Hydraulic flow divider in the trail

Condition: used, maximum load weight: 4,960 kg, overall weight: 10,500 kg, first registration: 04/1993, next inspection (TÜV): 01/2026, loading space length: 6,260 mm, loading space width: 2,430 mm, loading space height: 2,430 mm, loading space volume: 37 m³, Equipment: ABS, tail-lift, 2-axle tandem refrigerated trailer 7 m with 1-ton tail lift. * THERMOKING LND-II MAX (diesel engine) and standby cooling 380 V ELECTRIC * Vehicle number for customer inquiries: 4593 * Tail lift * Air suspension * EBS * Anti-lock braking system (ABS) No liability for typographical or printing errors. Sales to business customers only. Subject to prior sale and errors. Changes, interim sale, and mistakes expressly reserved. The description is provided for vehicle identification purposes and does not constitute a warranty in the legal sense. The purchase contract description is binding. * TOP SERVICE + QUALITY * We are happy to provide you with a LEASING-FINANCING-HIRE PURCHASE offer Warranty insurance available on request from the insurer * TÜV / UVV LBW / Tachograph inspection and installation of OBU device by our local partners * Customs plates valid for 30 days All export customs documentation possible, but must be requested separately * Toll for Toll-Collect can be arranged in-house Codpfxoykxfle Ak Terg * Free transfer from Stuttgart Airport or Metzingen (Württ) train station * TRAIN STATION FOR ARRIVAL: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP Number * * ---- Visit our website at * Always over 200 vehicles in stock

Condition: used, maximum load weight: 9,400 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 07/2020, loading space length: 6,300 mm, loading space width: 2,480 mm, Ref. No.: ZANDT Very well-maintained tandem flatbed trailer ZANDT Cargo Credpfxjymuz Is Ak Teg * TAT B 110 * Flatbed * Reinforced wooden floor * Heavy-duty lashing rails * 2-axle tandem * Wide tires * Adjustable drawbar * Permissible total weight: 11,900 kg * Very good condition Trade-in possible Financing from 3.99% Errors and prior sale excepted! The information in this listing is non-binding descriptions and does not constitute guaranteed features. The seller assumes no liability for typing or data transmission errors. Listed equipment/features must be checked separately. All information in the advertisements is non-binding! Delivery throughout Germany upon request Business hours: Monday to Thursday from 9:00 am to 5:00 pm Friday from 9:00 am to 2:00 pm and by appointment!

Condition: used, maximum load weight: 9,400 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 07/2020, loading space length: 6,300 mm, loading space width: 2,480 mm, Ref. No.: ZANDT Very well-maintained tandem flatbed trailer ZANDT Cargo * TAT B 110 * Flatbed * Reinforced wooden floor * Heavy-duty lashing rails * 2-axle tandem * Wide tires * Adjustable drawbar * Perm. gross weight 11,900 kg * Very good condition Trade-in possible Crsdpfxeymuz Ue Ak Teg Financing from 3.99% Errors and prior sale excepted! The details in this ad are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability for typographical or data transmission errors. Listed equipment must be verified separately. All information provided in the listings is non-binding! Delivery possible throughout Germany upon request Opening hours: Monday to Thursday from 9:00 a.m. to 5:00 p.m., Friday from 9:00 a.m. to 2:00 p.m., and by appointment!

Condition: used, empty load weight: 3,100 kg, maximum load weight: 7,400 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 10/2004, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 400 mm, suspension: steel, tire size: 235/75R17.5, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel body, 2 axles, BPW axles, tandem, leaf spring suspension, ABS (anti-lock braking system), lashing eyes, underride guard, front supports, rear supports, storage box, swing-open tailgates, drawbar with adjustable height. Body: Tandem 3-sided tipper trailer with loading ramps, 2x BPW axles, drum brakes! Loading ramps available for an additional charge of €990.00 net! Credpfxoztrw Ss Ak Teg Loading height approx. 900mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: new, maximum load weight: 10,950 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2026, Equipment: ABS, tail-lift, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem – Low-loader – Platform – Trailer Available from the 37th week of 2026, inquiry number: 31941. Delivery to your address is possible. * We would be happy to provide you with an individual offer. * ---- * GVWR: 14.4t, Payload: 10.95t * LED lighting system * GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs Credpezbfmqjfx Ak Tog * Tire pressure monitoring system (TPMS) * 6.27m x 2.47m platform with galvanized front wall 400mm * Excavator bucket rest made of hardwood, screwed onto the front wall * Unladen floor height 930mm / Laden floor height 870mm * One-piece ramps with hot-dip galvanized grating, slip-resistant design, can be pushed together to approx. 20 mm, secured by retaining rods and inclined support. * Ramp lifter with vertically mounted, adjustable springs for easy one-person operation. * 4 UVV lashing eyes (LC 6300daN) * Perforated outer frame (45° bent with hole pattern for lashing straps, lashing force per lashing point LC 2000 daN at a distance of min. 480 mm. Installation of UVV lashing eyes LC 3000 daN at a distance of approx. 600 mm is possible) with close transverse profiling, high-flanged front and rear end and rear access ramp, hot-dip galvanized. * 10 UVV lashing eyes LC 3000 daN, can be recessed into the existing hole pattern in the outer frame, in addition * Further lashing possibilities through holes (Ø 50 mm, LC 1200 daN) in the front and end beams * Tool box in front of the front wall * Side marker lights with turn signal control * Softwood floor, 50 mm thick. Chassis hot-dip galvanized * Height-adjustable support jacks at the front, folding supports at the rear. * 2 container locking devices recessed in the front beam * Drawbar with 40mm drawbar eye (hot-dip galvanized), height adjustable, a 50mm eye is also possible on request * 1 removable LED marker light at the rear ---- * Leasing, hire purchase, financing, and trade-in are possible. * e.g. 525 Euros with a 60-month term, no down payment, no residual value. * ---- * Our opening hours: * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 Outside of opening hours, we are available by appointment. We speak German, we speak English, mowimy po polsku, on parle français Leasing, financing, and trade-in are possible.

Condition: used, empty load weight: 4,400 kg, maximum load weight: 13,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 09/2012, loading space length: 6,770 mm, loading space width: 2,500 mm, loading space height: 1,000 mm, suspension: air, tire size: 235/75R17,5, color: black, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, turntable, air-suspended, lifting+lowering, ABS (anti-lock braking system), lashing eyes, container lock, twin tires, storage box Body: 2-axle turntable flatbed trailer with stanchions and TwistLock locks, TwistLock can be extended to 3m. 20t, drum brake, air suspension, 10t Gigant axles, ramp shaft 40x16cm. Access ramp for 1.000,- EUR extra charge! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Credpfx Aket Uq D To Tjg - .

Condition: used, maximum load weight: 8,750 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 06/2024, total width: 2,550 mm, Year of construction: 2023, Müller Mitteltal KA-TA-R 11.9 tandem 3-way tipper with lots of extras. Total weight: 11,900kg Standard payload approx.: 8,750kg Clear dimensions: 5,000x2,420x500mm Tires: 385/55R19.5 4-layer paintwork, single color Wheels: silver Chassis/underbody protection: hot-dip galvanized Platform with bulkhead: hot-dip galvanized Axles/springs/fuel tank etc.: black Side and rear wall: RAL 2011 deep orange Reinforced and certified structure in accordance with EN 12642 XL including load securing certificate. (Only in conjunction with 500mm high steel side walls). Rear stanchions screwed, hot-dip galvanized, without top coat. Lashing points LC 5,000 daN recessed at the front. Net hooks integrated at the side and rear in the bearings of the central locking system to the base side wall and 2 additional pieces on the front wall. BPW axles instead of GIANT tipping platform with permanently attached front wall in hot-dip galvanized design, with screwed, galvanized rear stanchions, without additional coating (not with HARDOX floor). Due to the system, the formation of waves during hot-dip galvanization, especially with the large floor panel, cannot be ruled out; complaints in this regard are excluded from the warranty. Tires 385/55R19.5 instead of 235/75R17.5 (floor and coupling height + approx. 110 mm, Code 08.940 ramp length 3,570 mm required). 1 plastic tool box, black, lockable, W=750xH=350xD=300mm (45kg payload with even load), arrangement: on the chassis frame on the right in the direction of travel. 1 pair of aluminum docking ramps without fairway (8 t/pair), 3,570x400x105mm, suitable for rubber-tired and tracked vehicles, 55 kg/each. Two-step access in front of the front wall, on the left in the direction of travel (hot-dip galvanized). Extended connecting lines for agricultural and forestry tractors. Crodpszwa Imofx Ak Tsg Further information New: No

Condition: used, first registration: 10/2014, overall weight: 27,000 kg, empty load weight: 5,100 kg, color: grey, gearing type: other, emission class: none, Year of construction: 2014, maximum load weight: 21,900 kg, next inspection (TÜV): 03/2027, suspension: steel, tire size: 265/70 R19.5, front tire size: 265/70 R19.5, rear tire size: 265/70 R19.5, driver cabin: other, Equipment: ABS, additional headlights, chassis, compressed air brake, electronic stability program (ESP), fog lights, lighting, truck registration, Müller Mitteltal 3-axle trailer for skip loaders TM 2 24.0 Csdpezbbbdefx Ak Torg * Mounting for 2 x 12 m³ containers/skip loaders * Lowerable pneumatic drawbar for front loading * Adjustable anchor point for container mounting * Manual lashing with ratchets * Sealed floor * BPW axles * Leaf spring suspension * Frame/chassis galvanized * Drum brakes * Wear plates * Additional spotlights * 7 lashing eyes per side, located on the outside * Large toolbox * Weights: GVWR - 27,000 kg, Unladen weight - 5,170 kg, Payload - 21,830 kg * German vehicle with German documentation!! * First owner!! * First registration: 10/21/2014 * MOT valid until 03/2027 * Inspection valid until 09/2026 * VIN: WMM00000E0058208 Subject to prior sale, errors and changes! Some company logos have been removed from the images – please inquire! Function of extras without guarantee! Your contact: Christoph Ott Tel. + WhatsApp:

Condition: new, maximum load weight: 8,780 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2024, * KA-TA-R 11.9 Masterline: Cedpfxjpk D Dme Ak Terg ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem compensating unit ----Drawbar / Flange Eye: * Height-adjustable (up to 300 mm), hot-dip galvanized drawbar with 40 mm flange eye ----General Attachments: * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanized folding support legs at the rear * Side-mounted toolbox made of galvanized sheet steel, on the right * Plastic quarter mudguards ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * Bolted underrun protection with LED tail lights ----Tipper Body: * Mesh hooks on the sides and rear, integrated into the central locking mounts plus 3 external hooks on the front wall * Hot-dip galvanized chassis * Steel pal. three-way tipper body, fully galvanized * Continuous side walls, without central stanchion, foldable, with drop side spring supports * Tailboard can be folded down and used as a swinging gate, with manual central locking * Hot-dip galvanized, bolted rear stanchion ----Load Securing: * 1 x 5 t recessed, foldable lashing ring in each corner, plus 4 x 3 t recessed and foldable lashing rings integrated in the outer frame on each side * 4 mm steel floor, with slot rail at the rear for loading ramps ----Ramps: * 1 pair of aluminum loading ramps, approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the bed, integrated into the chassis, accessible from the rear ----Tyres: * Tyres 235/75 R 17.5 ----Paintwork: * Axles, springs, air tanks, drawbar and landing gear painted in black * Vehicle is hot-dip galvanized ----Information: * Body reinforced, load securing certificate according to EN 12642 XL * New vehicle with manufacturer warranty * Subject to prior sale and errors ----Delivery time: * Immediately available ex Egestorf on the A7

Condition: new, maximum load weight: 8,780 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2024, * KA-TA-R 11.9 Masterline: ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem compensating unit ----Drawbar / Flange Eye: * Height-adjustable (up to 300 mm), hot-dip galvanized drawbar with 40 mm flange eye ----General Attachments: * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanized folding support legs at the rear * Side-mounted toolbox made of galvanized sheet steel, on the right * Plastic quarter mudguards ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * Bolted underrun protection with LED tail lights ----Tipper Body: * Mesh hooks on the sides and rear, integrated into the central locking mounts plus 3 external hooks on the front wall * Hot-dip galvanized chassis * Steel pal. three-way tipper body, fully galvanized * Continuous side walls, without central stanchion, foldable, with drop side spring supports * Tailboard can be folded down and used as a swinging gate, with manual central locking * Hot-dip galvanized, bolted rear stanchion ----Load Securing: * 1 x 5 t recessed, foldable lashing ring in each corner, plus 4 x 3 t recessed and foldable lashing rings integrated in the outer frame on each side Csdpfxjpk D D Uo Ak Terg * 4 mm steel floor, with slot rail at the rear for loading ramps ----Ramps: * 1 pair of aluminum loading ramps, approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the bed, integrated into the chassis, accessible from the rear ----Tyres: * Tyres 235/75 R 17.5 ----Paintwork: * Axles, springs, air tanks, drawbar and landing gear painted in black * Vehicle is hot-dip galvanized ----Information: * Body reinforced, load securing certificate according to EN 12642 XL * New vehicle with manufacturer warranty * Subject to prior sale and errors ----Delivery time: * Immediately available ex Egestorf on the A7

Condition: new, maximum load weight: 10,900 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * KA-TA-R 14.4 ----Brakes: * Wabco EBS * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 tons Gigant axles ----Suspension: * Parabolic springs with tandem equalizer ----Drawbar / Flange coupling: * Height-adjustable, hot-dip galvanized drawbar by 300 mm with a 40 mm flange coupling ----General components: * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanized folding supports at the rear * Hot-dip galvanized bolted underrun protection Crodpfx Aol Th A Eok Teg * Toolbox made of galvanized sheet steel on the right side * Plastic quarter fenders * 2-step step on the left side as an aid for getting on ----Electrical system / Lighting: * TPMS tire pressure monitoring system * 15-pole power connector * LED tail lights ----Tipping bridge: * Steel, 3-sided tipping body * Continuous side walls at the top with internal tube reinforcement - without center posts - foldable with side wall spring supports * Foldable and pivoting tailgate via manual central locking * Hot-dip galvanized bolted rear posts * 4 mm fine-grained steel floor * Lashing hooks, receiving rail at the rear for loading ramps * Preparation for later retrofitting of side wall extensions ----Chassis: * Hot-dip galvanized chassis ----Load securing: * 1 x 5 tons lashing point in each corner and 4 x 3 tons lashing eyes on each side, embedded in the outer frame ----ALU loading ramps: * 1 pair of ALU loading ramps approx. 3,570 x 400 mm (load capacity 8 tons / pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment at the rear below the loading area, embedded in the chassis ----Tires: * Tires 385/55 R 22.5 ----Painting: * The axles, springs, air tanks and landing gear are painted in a black tone. * Chassis, drawbar, floor, front panel, folding supports are hot-dip galvanized. * Painting of the side walls in RAL 9010 pure white. * Painting of the side walls in an RAL color against surcharge possible. ----Information: * Body reinforced with load securing certificate according to EN 12642 XL * New vehicle without initial registration with manufacturer's warranty * Errors and prior sale reserved ----Delivery time: * Available from approx. week 45/2026

Condition: used, maximum load weight: 15,100 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 03/1987, loading space length: 8,650 mm, loading space width: 2,480 mm, ? Mechanical ramps Crodpfeyw Egwex Ak Tjg ? Loading height: approx. 910 mm ? Spare wheel holder ? 40 mm towing eye ? Beacon ? Drum brakes ? Leaf suspension ? 1 x toolbox ? Twin tires ? SAF axles All information without guarantee / Subject to prior sale.

Condition: new, maximum load weight: 27,940 kg, overall weight: 36,000 kg, axle configuration: 3 axles, Year of construction: 2026, * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t axles * Air suspension with lift and lower function as well as RtR valve * Traction assistance for shunting, activated on the first axle via EBS – without truck-side installation – with lifted lift axle + 30 mm driving height * Smart-Board infotool mounted on the trailer, equipped with pressure sensors for total axle load display * Last axle as a trailing steering axle with electro-pneumatic steering lock * Locking of the trailing axle activated from the cab for maneuvering purposes via EBS (without truck-side installation) * 2" king pin * 1 liftable axle * Side underrun protection * Front aluminum drop-down supports and rear swivel supports on the chassis * Alcoa LVL One aluminum rims * 15-pin power connector * LED lighting 12 / 24 V * Rear removable LED rotating beacon * 2 additional LED reversing lights * 2 LED work lights mounted laterally on the trailer (without truck-side installation) * 7-pin socket at the rear for oversize load lighting Codswh Hdxopfx Ak Tsrg * Side marker lights with indicator control * Tire pressure monitoring system with display capability in the truck via EBS signal (without truck-side installation) * Mechanically adjustable warning sign packages front and rear * Straight steel mudguards * Semi-trailer platform with 45° chamfered front corners and a front toolbox made of galvanized, powder-coated steel sheet (W = 2,480 x H = 500 x L = 665 mm) with top hinged lid and side doors in the chamfered corners * 400 mm high aluminum side walls (RAL 9010 pure white) on the sides of the semi-trailer platform, foldable and removable * Rear panel inserted, height 150 mm * Rear slope on the semi-trailer platform to the low bed, approx. 700 mm long with anti-slip tread plate surface and a perforated strip at the end for hanging on aluminum loading ramps * Semi-trailer platform and low loader platform with 50 mm clamped timber floorboards * Checker plate above the axles * Prepared for 3 slots underneath the semi-trailer platform for storage of optional aluminum loading ramps * Swivel arm as support for connection lines from the truck to the trailer * Load securing package (LaSi): perforated outer frame on the semi-trailer platform with 45° edge and hole pattern for lashing equipment (2 t lashing capacity per point at minimum spacing of 480 mm), each side with 2 x 6.3 t recessed lashing rings in the floor, each side with 1 x 16.5 t lashing ring in the incline from the low loader platform to the semi-trailer platform, 2 pairs of 16.5 t lashing rings in the low loader platform (1 x on the longitudinal beams after the step, 1 x above the center axle beside the longitudinal beam), each side with 3 x 13.4 t lashing rings on the outer frame (1 x at start of the semi-trailer step, 1 x at start of loading ramp slope, 1 x at end of loading ramp slope), each side with 3 x 10 t lashing rings (2 x between front wheel recess and first axle, 1 x between second and third axle), each side with 3 x 5 t lashing rings bolted to the outer frame of the wheel recesses (2 x at front, 1 x at rear wheel recess) * Extended excavator arm trough running from the end of the last fixed axle over the steering axle up to the rear crossmember, with internal reinforcement profile, approx. W = 770 mm x rear D = 270/front D = 170 mm, each side with 2 x 6.4 t lashing rings in the excavator arm trough * Each side with 2 wheel recesses, 390 mm deep and 640 mm wide, f

Condition: used, maximum load weight: 13,450 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2014, next inspection (TÜV): 05/2027, loading space length: 4,950 mm, loading space width: 2,370 mm, loading space height: 900 mm, loading space volume: 10 m³, Equipment: ABS, * 3-way tipper with side tipper system * Gigant axles * Drum brakes * ABS Csdpfxszkfgus Ak Torg * Air suspension * Support legs All information is subject to change without notice / subject to prior sale.

Condition: used, axle configuration: 2 axles, Year of construction: 2020, = Additional options and accessories = Codpozxqumefx Ak Tjrg - Air suspension, rear - Air suspension, front = Notes = Tandem low-loader trailer, drive-over design. Permissible total weight 21,000 kg, unladen weight 5,120 kg. Platform dimensions approximately 6,500 x 2,470 x 400 mm (internal) with access ramp, reinforcement package for transporting drilling equipment, 14 lashing points, perforated outer frame, side panels that can be folded down with gas springs, rear panel secured, loading height approximately 940 mm unladen, retrofitting with 2 twist-lock container locking mechanisms possible. Loading ramps approximately 3,000 x 620 mm covered with grating. Tow hitch 50 mm, height-adjustable via screw plate. Height-adjustable two-speed support winch at the front, automatic rear support. 2-line air, 24 Volt. Gigant axles, air suspension with lifting and lowering function, twin tires 235-75R17.5, spare wheel with holder. Vehicle hot-dip galvanized, side panels orange. Very good condition! = Further information = Unladen weight: 5,120 kg Payload: 15,880 kg GVWR: 21,000 kg Tire size, front: 235-75R17.5 Tire size, rear: 235-75R17.5 Country of manufacture: DE Please contact Jan-Marc Schwickert for further information.

Condition: used, empty load weight: 4,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2009, next inspection (TÜV): 11/2026, loading space length: 5,000 mm, loading space width: 2,380 mm, loading space height: 980 mm, loading space volume: 12 m³, suspension: air, tire size: 385/65 R22,5, wheelbase: 1,310 mm, color: red, Equipment: ABS, Drum brake EBS (Electronic Braking System) Payload 13,300 kg Steel sideboards Left side: swing-out and folding, with lifting springs BPW axles Crodpfx Akozliu Ej Tjg Foldable underrun protection Errors and omissions excepted.

Condition: used, maximum load weight: 13,860 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2022, loading space length: 6,770 mm, loading space width: 2,480 mm, loading space height: 600 mm, loading space volume: 10 m³, Equipment: ABS, ? galvanized chassis ? low-coupled ? 50 mm towing eye ? container lock ? 12 lashing rings per side ? rearview camera ? drum brakes ? Duomatic coupling ? ABS ? air suspension ? toolbox ? EBS ? support legs ? twin tires ? BPW axles All information is provided without guarantee / subject to prior sale. Csdpoxb Iglsfx Ak Terg

Condition: used, maximum load weight: 13,860 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2022, loading space length: 6,770 mm, loading space width: 2,480 mm, loading space height: 600 mm, loading space volume: 10 m³, Equipment: ABS, ? galvanized chassis ? low-coupled ? 50 mm towing eye ? container locking ? 12 lashing rings per side ? rear view camera ? drum brakes ? duomatic coupling Codpfxexb Ig Ss Ak Terg ? ABS ? air suspension ? toolbox ? EBS ? support legs ? twin tires ? BPW axles All information subject to change / Prior sale reserved.

Condition: new, maximum load weight: 10,500 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * EBS (electronic braking system) * Emergency release device for spring-loaded cylinder * Drum brakes * 2 x 7-ton Gigant axles * Air suspension with lifting and lowering system * Drawbar adjustable in height by 300 mm Crsdjl Thvxspfx Ak Tog * Drawbar extension by 250 mm to 2,250 mm * Tire pressure monitoring with display option in the truck via EBS signal - without installation on the truck side * 15-pin power connector * LED lighting * Front support jacks * Outboard folding supports at the rear * Plastic tool box approx. 858 x 500 x 500 mm on the front right side, on the front wall * Side underrun protection * Plastic quarter fender * 50 mm softwood floor * Before the front wall and at the rear, provision for subsequent installation of 20" container locking mechanisms * Bolted front wall made of smooth sheet metal * Side walls made of steel sheet - trapezoidal profile - foldable, divided in the middle * Steel rear wall, slidable between the ramps, with mounting bracket for storage inside, in front of the front wall when not in use * Rear cross members screwed on * Perforated outer frame, bent at approx. 45 degrees, with a lashing force of 2 tons every 480 mm * Installation of 3-ton drop-side lashing eyes every 600 mm possible - 4 lashing eyes installed on each side * One 6.3-ton lashing eye each in the corners at the front and rear * Profifix lashing bar in the longitudinal axis, in the middle, for lashing with a load capacity of up to 3000 daN * Various holes in the front and end beam for 1.2-ton lashing * One-piece mechanical grating ramp with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Approach angle at the rear, approx. 860 mm * Chassis, drawbar, front wall, rear tailgate, folding supports and ramps hot-dip galvanized * Axles, springs, air tanks, flange couplings and support jacks painted in a black tone * Sideboards in RAL 9010 pure white * --reinforced and certified body according to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer's warranty * Errors and prior sale subject to change * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 10,500 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7-ton Gigant axles * Air suspension with lifting and lowering system * Drawbar adjustable by 300 mm in height * Drawbar extension by 250 mm to 2,250 mm * Tire pressure monitoring with display option in the truck via EBS signal - without truck-side installation * 15-pole power connector * LED lighting * Front support jacks * Outboard, folding support legs at the rear * Plastic tool box approx. 858 x 500 x 500 mm on the front right outside on the front panel * Side underrun protection * Plastic quarter fenders * 50 mm hardwood flooring * Device for retrofitting 20" container locking mechanisms in front of and behind the front panel * Bolted front panel made of smooth sheet metal * Side walls made of steel sheet - trapezoid-profiled - foldable, divided in the middle 1x * Steel rear wall can be slid between the ramps, stored when not in use inside the front panel * Rear cross members bolted * Perforated outer frame approx. 45 degrees bent with 2-ton lashing force every 480 mm * Installation of 3-ton lashing eyes every 600 mm possible - 4 lashing points installed on each side * 1 x 6.3-ton lashing point in each front and rear corner * Profifix lashing rail in the longitudinal axis in the middle for lashing up to LC 3000 daN * Various holes in the front and end cross member for 1.2-ton lashing Crsdol Th Dfepfx Ak Tjg * One-piece mechanical grating access ramps with spring mechanism for single-person operation approx. 2,750 x 600 mm (can be slid together to 20 mm) * Approach angle at the rear approx. 860 mm * Chassis, drawbar, front panel, tailgate, folding support legs and access ramps hot-dip galvanized * Axles, springs, air tanks, flange couplings and support jacks painted in a black tone * Side boards in RAL 9010 pure white * --reinforced and certified body according to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Immediately available from Egestorf

Condition: new, maximum load weight: 8,750 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 1,000 mm, Year of construction: 2026, Equipment: ABS, tail-lift, Inquiry number: 31943 * NEW VEHICLE, soon available. Müller-Mitteltal KA-TA-R 11.9, tandem low-loader, three-way tipper trailer with ramps and extension sideboards * Tires 385/55 R19.5, (4 tires), BPW axles, parabolic springs, drum brakes * GVWR: 11,900 kg, payload: 8,750 kg (standard). * Tire pressure monitoring system with display option in the truck via EBS signal, * EBS instead of ABS, 24 Volt * EBS multi-voltage system for 24V and 12V vehicles (e.g., tractors) * Side marker lights with turn signal control * LED lighting system for 12+24 Volt * 2 x additional LED reversing lights * Floor zinc-plated 5m x 2.42m x 0.5m, sideboards swingable, foldable and removable, + 0.5m extension sideboards * Lockable compartment under the tipping bridge for the access ramp * Incl. aluminum ramps, 8t load capacity, 3.57m long, stored in the ramp compartment under the tipping structure * Floor hot-dip galvanized, front panel hot-dip galvanized * 4 UVV lashing rings LC 5000daN at the front and rear + 8 recessed and foldable lashing eyes LC 3000daN in the tipper floor (centered) * Drawbar continuously height-adjustable, hot-dip galvanized, drawbar eye 40mm * Net hooks * Bolted, galvanized rear supports * Excavator bucket rest mounted on the front panel * One plastic tool box on the chassis frame on the right * Steps in front of the front panel ---- * We are a Müller-Mitteltal sales partner ---- * Request a quote from us! * For example, €572 net per month for 60 months without a down payment or residual value. An offer from our financing partner, FM LeasingPartner ---- Our opening hours Cedpfx Akjzxvmbe Tsrg Monday - Thursday: 08:00 - 17:00 Friday 08:00 - 15:00 Outside of opening hours, we are available by appointment. We speak German, we speak English, mowimy po polsku, on parle français, Whatsapp Leasing, financing, trade-in possible ----

Condition: used, maximum load weight: 30,850 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 07/2014, loading space length: 9,650 mm, loading space width: 2,520 mm, total length: 12,250 mm, total width: 2,550 mm, total height: 3,700 mm, Equipment: ABS, Low-loader T4 RM 40.0 with wheel recesses: front - (L x W x H) 1900x670x320 mm, rear - (L x W x H) 1200x670x210 mm, loading platform: 6960 mm, extendable to 3000 mm, loading height: approx. 920 mm, rear slope: 870 mm, high bed 1500 mm / storage box at the front approx. (L x W) 500x2200 mm, 7 x heavy-duty lashing eyes per side / + 2 pairs in the middle, excavator arm recess / (L x W) 2500x730 mm, side-shifting access ramps (L x W) 2900x720 mm with spring-assisted lifting mechanism / galvanized, all-round warning light, 50 mm drawbar eye, reversing camera, ABS, EBS, SAF axle(s), drum brake system, leaf spring suspension, the vehicle can be fitted with advertising and/or lettering. SI87185 Crodpfezw Sfkex Ak Tjg Our offer generally does not include a new TÜV inspection. If a new TÜV inspection is desired, we will gladly provide you with a quote from our partner workshops! The vehicle can be fitted with advertising and/or lettering. Our general terms and conditions of delivery and payment apply. We will be happy to prepare a financing or leasing offer for this item. Please contact us!