Used Work Platform Trailers for sale (71)

Condition: used, maximum load weight: 600 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 04/2025, loading space length: 2,500 mm, loading space width: 1,260 mm, loading space height: 300 mm, total width: 1,710 mm, total height: 790 mm, The box trailer consists of a sturdy aluminium construction with a wear-resistant wooden floor. Gedpfxey A A Sne Aa Ssua Errors and prior sale excepted.

Condition: used, maximum load weight: 2,775 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 3,530 mm, loading space width: 1,650 mm, total width: 2,435 mm, total height: 2,130 mm, A15 GW26NG00315 Construction machinery transporter, manufacturer STEMA, model BMAT, total weight: 3,500 kg, low-loader, with overrun brake, 100 km/h, equipped with aluminium ramps, 3.53 m x 1.65 m ...and much more. Subject to errors and prior sale. Loading height: 500 mm. Gjdpeym Iftjfx Aa Ssua

Condition: used, maximum load weight: 2,775 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 3,530 mm, loading space width: 1,650 mm, total width: 2,435 mm, total height: 2,130 mm, A15 GW26MG00273 Construction machinery transporter, Manufacturer A, model BMAT, gross weight: 3,500 kg, low-loader, overrun braked, 100 km/h, with aluminium ramps, 3.53 m x 1.65 m ...and much more. Subject to errors and prior sale. Godpfjym Ihzex Aa Seua

Condition: used, maximum load weight: 2,186 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 3,005 mm, loading space width: 1,400 mm, loading space height: 200 mm, total width: 2,035 mm, total height: 2,130 mm, A45 GW26G000189, Construction machinery transporter, manufacturer STEMA, type BMAT .2, gross weight: 2,700 kg, with steel loading ramps, inertia braked, 100 km/h approval, 3.01 m x 1.40 m platform. Gedpfxsyqdqmj Aa Seua Equipped with 100 km/h shock absorbers* Tandem low-loader chassis available with either STEMA V-drawbar or central tube drawbar * Welded and hot-dip galvanized chassis made from heavy-duty steel sheet * Front and side walls made of 3 mm welded black steel sheet * 20 cm high welded drop sides * Continuous phenolic plywood floor (18 mm thick), optionally with additional aluminum chequer plate floor (3 mm thick) * Walk-on steel mudguards for easy access * 2 longitudinal beams for optimal load distribution ...and much more. Errors and prior sale excepted.

Condition: used, maximum load weight: 2,649 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 4,005 mm, loading space width: 1,800 mm, total width: 2,435 mm, total height: 2,130 mm, A14 GW26GA00002 Guedpfxoym Ifae Aa Soa Construction machinery transporter by STEMA, model BMAT .2, gross weight: 3,500 kg, low-loader, with overrun brake, 100 km/h, equipped with steel ramps, tiltable, 4 m x 1.80 m ...and much more. Errors and interim sale excepted.

Condition: new, empty load weight: 4,400 kg, maximum load weight: 19,600 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 8,600 mm, suspension: air, tire size: 235/75 R17,5, wheelbase: 8,795 mm, Equipment: ABS, | Krone AD Jumbo Flatbed Trailer 3-Axle New | Multilock outer frame along the entire length | Air suspension front and rear (raise/lower) | Turntable with ball bearing slewing ring, low-maintenance | 40 mm drawbar eye | BPW axles with drum brakes | Spare wheel holder | Dimensions (L x W x H): 8.60 x 2.48 x 0.93 m | Steel front wall 1.60 m | Wheelbase: 8,795 mm | Tyres 12x front/rear: 235/75 R 17.5 | Subject to error, change and prior sale. Guedpfx Aasyzm Eco Sea

Condition: new, maximum load weight: 15,825 kg, overall weight: 20,500 kg, axle configuration: 2 axles, loading space width: 2,480 mm, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and soon-available vehicles, on our website. Excerpt from the equipment list. Full specifications available upon request. Chassis: * Steel-welded construction with welded longitudinal beams and through Z-cross members, close cross member spacing for high floor load capacity * Ramp storage between longitudinal beams behind the axle assembly under the loading floor. Two insertion pockets for one ramp each, with closure plate on the rear headframe Underride protection: * According to EU regulations Landing legs (front): * Landing legs with single-side operation Support (rear): * Two adjustable drop supports Axles: * 2 x 10 t air suspension axle units, manufacturer SAF, drum brakes approx. 300 x 200 mm, centered wheel mounting for twin tires, ABS, total air suspension stroke approx. 200 mm (lift approx. 140 mm, lower approx. 60 mm), control via hand lever with latch function Tyres: * 8x, 235/75R 17.5 – manufacturer of our choice, on steel rims 6.75 x 17.5, mounted with ET Spray protection: * Made of PVC in front of and behind the axles, according to EU regulations Load securing: * Outer frame with one hole every approx. 150 mm for tension straps, lashing force approx. 2.5 t (lashing straps can be fastened with sideboards closed, chamfered outer frame) * 6 pairs of foldable lashing rings, evenly spaced, tensile force approx. 8 t. * Stake pockets for removable stanchions 80/50: 3 pairs in the outer frame, evenly distributed Brake system: * Compressed air brake system in accordance with EU regulations with EBS * Two coils as a connection to the truck with red/yellow coupling heads * Spring-actuated parking brake acting on one axle Floor: * Approx. 28 mm Z-hardwood floor, recessed in the outer frame Front wall: * Removable from 25 mm high sideboard Lighting system: * Lighting equipment in accordance with EU regulations, 24 volts, multi-chamber rear lights, license plate lights, side marker lamps, and tail marking lights at the rear. Connection panel on the left of the towing bar, including connection cable with 15-pin and 2 x 7-pin plugs Accessories: * 2 wheel chocks with holders * Plug-in beacon at the rear * Additional 40 mm drawbar coupling (max. gross weight 13,500 kg) * Rear extension by approx. 800 mm incl. underride protection, extendable loading platform, load capacity approx. 2 t, locking every approx. 200 mm * Mechanically length-adjustable rigid drawbar, 6 x approx. 100 mm increments, with bolted towing eye approx. 50 mm as per DIN 74053 * 4 rows of stake pockets across the loading area, evenly distributed * 12 removable stanchions made of galvanized tube, approx. 80/50/4 mm, approx. 1,000 mm long * Container locks for 1x20’ container * 1 x 20’ extendable to approx. 2,820 mm, according to ISO 1496, EN 284, or EN 452 * 1 pair aluminum loading ramps, load capacity per pair approx. 9,000 kg * 4 stainless steel toolboxes between or behind the axles * 6 x 25 mm sideboards and rear wall made of anodized aluminum hollow profiles, approx. 600 mm high, foldable and removable, removable Kinnegrip stanchions (internal width approx. 2,480 mm), including sideboard storage at the front near the headboard Paintwork: * Chassis shot-blasted, cleaned and premium hot-dip galvanized according to latest technology * Body components cleaned, primed and hot-dip galvanized * Chassis: hot-dip galvanized + RAL 3002 carmine red Guodpfx Aajy Auhbj Ssa * Sideboards: RAL 3002 carmine red * Kinnegrip stanc

Condition: new, maximum load weight: 16,180 kg, overall weight: 20,500 kg, axle configuration: 2 axles, total width: 2,480 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Below is an excerpt from the equipment. Full specification available upon request. Chassis: * Steel welded construction made of welded longitudinal beams and punched-through Z cross members; close cross member spacing for high floor load capacity * Ramp holder: Between the longitudinal beams, behind the axle assembly, under the loading floor, two slide-in pockets for loading ramps (one per pocket), with cover plate in the rear head frame Underrun protection: * In accordance with EU regulations Landing legs: * Front: landing legs with single-sided operation * Rear support: two adjustable drop legs Axles: * 2 x 10 t air suspension axle assemblies, brand SAF, approx. 300 x 200mm drum brakes, center-bored for twin tires, ABS, total air suspension lift approx. 200mm (of which raise approx. 140mm, lower approx. 60mm), manual lever control with detent function Tyres: Gusdjy Auf Topfx Aa Soa * 8 units, 235/75 R17.5 - brand of our choice. Mounted on 6.75x17.5 rims with offset Splash guards: * PVC splash guards in front of and behind the axles as per EU regulations Load securing: * On the outer frame, boreholes for lashing straps at approx. every 150 mm, lashing capacity approx. 2.5 t * 6 pairs of folding lashing rings evenly distributed, lashing capacity approx. 8 t * Stake pockets for 80/50 insert stakes: 3 pairs on the outer frame, evenly distributed Brake system: * Compressed air brake system according to EU regulations with EBS * Two coils as coupling to the truck, red/yellow coupling heads * Spring-loaded parking brake acting on one axle Floor: * Approx. 28 mm Z hardwood floor recessed into the outer frame Lighting system: * Lighting system according to EU standards, 24 Volt, multi-chamber rear lights, license plate lights, side marker and lane departure lights at the rear, connection plate left at the drawbar, including connecting cable with 15-pin and 2 x 7-pin connectors Accessories: * 2 wheel chocks with holders * Detachable flashing beacon at the rear * 40 mm towing device supplied (GVW max. 13,500 kg) * Rear extension approx. 800 mm including underrun protection, extendable loading platform, load capacity approx. 2 t, locking every approx. 200 mm * Mechanically adjustable rigid drawbar in length, 6 x approx. 100 mm increments, with bolted 50 mm towing eye per DIN 74053 * 4 rows of stake pockets across the loading area, evenly distributed * 12 galvanized pipe insert stakes, approx. 80/50/4 mm, approx. 1,000 mm long * Container locks for 1 x 20' container * Container locks 1 x 20' extendable to approx. 2,820 mm, compliant with ISO 1496, EN 284 or EN 452 * 1 pair of aluminum loading ramps, load capacity per pair approx. 9,000 kg * 4 stainless steel toolboxes between or behind the axles Paintwork: * Chassis shot-blasted, cleaned, and high-quality hot-dip galvanized to the latest technological standard * Body components cleaned, primed, and hot-dip galvanized * Chassis: hot-dip galvanized + RAL 9011 graphite black * Outer frame: hot-dip galvanized + RAL 9010 pure white * Hubs: KTL black * Underrun protection: RAL 9010 pure white * Rims: RAL 9006 silver * Fittings: galvanized / KTL black

Condition: used, maximum load weight: 15,250 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2007, ? Ballast platform ? 50 mm towing eye ? 5 x lashing eyes ? Drum brake Guodew Sqi Espfx Aa Sea ? Leaf spring suspension ? Support legs ? BPW axles All information is provided without guarantee / subject to prior sale.

Condition: used, maximum load weight: 13,860 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2022, loading space length: 6,770 mm, loading space width: 2,480 mm, loading space height: 600 mm, loading space volume: 10 m³, Equipment: ABS, ? galvanized chassis ? low-coupled ? 50 mm towing eye ? container locking ? 12 lashing rings per side ? rear view camera ? drum brakes ? duomatic coupling Gusdpoxb Ig Sjfx Aa Sea ? ABS ? air suspension ? toolbox ? EBS ? support legs ? twin tires ? BPW axles All information subject to change / Prior sale reserved.

Condition: used, maximum load weight: 15,250 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 12/2008, ? Platform for ballast weights ? 50 mm towing eye ? 4 lashing eyes ? Drum brake ? Leaf spring suspension Guodewfk R Djpfx Aa Sea ? Support legs ? BPW axles All information is provided without guarantee / subject to prior sale.

Condition: new, maximum load weight: 16,750 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 21.0: * Wabco EBS-E (electronic braking system) Gujdpfxjl Tihxs Aa Soa * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lifting and lowering system * At the front bulkhead and sloped rear end, provision for retrofitting container locks for transporting 20" containers * Drawbar with 50 mm flange eye and height-adjustable drawbar * Jost landing gear at the front * Rear external folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter fenders * 15-pin electrical connector * LED lights * 21 t GVW version with reinforced frame and reinforced axles * Reinforcement kit for drilling rig transport on the chassis * 50 mm softwood floor in clamped installation * Provision at the front bulkhead for retrofitting container locks * Bolted smooth sheet steel front wall * Split side walls made of trapezoidal-profile steel, foldable, with folding stanchion in the middle * Removable steel rear wall between the ramps – storage holder in front of the bulkhead when not in use * Rear stanchions bolted * Perforated outer frame approx. 45 degrees beveled, with 2 t lashing capacity every 480 mm * Installation possible for 3 t fold-down lashing rings every 600 mm * Profifix lashing rail centrally in the longitudinal axis, rated to LC 3000 daN * 1 x 10 t lashing ring front and rear corners each * Lashing package: each side 2 x 8 t retractable lashing rings in the outer frame; various holes in front and rear crossmembers for 1.2 t lashing points * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 3,000 x 620 mm (can be collapsed to 20 mm) * Inclined approach at rear approx. 860 mm on the chassis * Drawbar, front wall, rear flap, folding supports and ramps hot-dip galvanized * Axles, springs, air tanks and landing gear painted in black * Loading height unladen approx. 940 mm * Laden approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Side board color freely selectable up to approx. 2 weeks before production date (no metallic or special colors) * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from week 28 / 2026

Condition: used, functionality: fully functional, machine/vehicle number: W09K35135G1KB6013, Year of construction: 2016, operating hours: 1,823 h, TÜV valid until 08/2026, new inspection available upon request. Includes matching accessories: grab, debris bucket, hanging cage. Gusdpfjyt Hhmjx Aa Ssa

Condition: new, maximum load weight: 31,900 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Year of construction: 2026, Equipment: ABS, T 4 Profi 40.0 ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lift/lower function and RtR valve ----Drawbar: * Straight drawbar with 50 mm towing eye and infinitely adjustable height setting ----Electrical / Lighting: * Tire pressure monitoring system with display option in the truck dashboard via EBS signal (no truck-side installation required) * SmartBoard as an infotool with pressure sensors for axle load indication by axle group * 15-pin power connector * LED tail lights * Removable LED beacon at the rear ----General Attachments: * Warning sign packages front & rear * 2 x toolboxes made of galvanized and powder-coated steel approx. 650 x 300 x 600 mm, mounted on the right side * Front closed plastic single mudguards * Rear straight steel splash guards each with spray suppression * Side underrun protection ----Low-loader Platform: * Rotary-platform extension by 520 mm with 45° corners and 3 integrated storage compartments incl. lockable covers * Flooring over rotary-platform from 50 mm and on low-loader platform from 60 mm softwood * 20 mm rubber flooring instead of timber in the deck area, low-loader length 6,780 mm including access ramp * Rubber flooring on upper access slope left and right, approx. 860 mm long * Each side with 4 stake pockets (no stakes included), 2 t lashing option per pocket ----Chassis: * Chassis made of high-strength fine-grain steel ----Load Securing (Lashing Package): Rotary-platform: * 2 pairs 13.4 t lashing rings in the outer frame of the rotary-platform Gsdpjylfvgjfx Aa Soua Low-bed: * Each side with 4 pairs 10 t retractable lashing rings on the outer frame, loadable in all directions * Each side rear with 2 pairs 13.4 t swing-away lashing rings ----Ramps: * Rubber surfacing on foldable loading ramps * Hydraulic folding ramps with hydraulically deployable ramp tips, approx. 4,650 x 720 mm * Hydraulic lateral ramp adjustment & load-holding valves ----Rear Support: * Hydraulic rear support ----Widening: * 8 pairs galvanized folding outriggers for 3 m overall width (not on rear ramp slope) * Extension planks stored in compartment on left side ----Excavator Arm Rest: * Excavator arm rest above rear axle to end of ramp, approx. L=2,100 mm x W=740 mm x H=190 mm * 2 pairs 6.4 t lashing rings on side of excavator arm rest ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output in truck over 40 up to max. 120 l/min) ----Loading dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm ramp) * Area above turntable: approx. 2,990 x 2,520 mm ----Loading height: * Loaded: approx. 890 mm, +/- 20 mm ----Paintwork: * Reflective contour markings on sides and rear * Chassis, rotary-platform, ramps, and folding outriggers hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in black tone ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images may show special equipment ----Delivery time: * Vehicle available from approx. week 23/2026

Condition: new, maximum load weight: 30,080 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Year of construction: 2026, * T4 RM 40.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display capability in the truck via EBS signal (no truck-side installation required) * Drum brakes * 4 x 11 ton Gigant axles * Air suspension with manual lowering at the rear * Warning sign packages front & rear * SmartBord infotool mounted with pressure sensors for total axle load display per axle group * Side and rear reflective contour tape * Removable LED beacon at the rear Guodpfxsxmpyds Aa Soa * 15-pin power connector * LED tail lights * Straight drawbar with 50 mm towing eye and stepless height adjustment * Closed single plastic mudguards at the front * Straight rear steel mud flaps each with spray suppression * Side underrun protection * Front extension in front of turntable platform approx. 520 mm with 45° corners and 3 storage compartments incl. lockable folding lids (open to the rear) * Chassis made of high-strength fine-grain steel * Floor above turntable platform made of 50 mm softwood and 60 mm softwood on low-bed platform * Outer planks of the ramps made of 50 mm hardwood * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the turntable platform; one pair each (front & rear) of 13.4 t lashing rings on the outer frame; one pair each side of 10 t swivel and lowerable lashing rings, loadable in all directions and integrated in the outer frame; bolted 5 t lashing rings on the outer frames of the wheel wells (2 at the front wheel well, 1 at the rear); 2 pairs of 6.4 t lashing rings at the sides of the excavator boom cradle * 11 pairs of folding outriggers for a total width of 3 meters (not on rear slope) * Storage compartment (L = 2,470 x W = 570 x H = 250 mm) for widening planks made of sheet steel, mounted transverse to the load area in front of the 1st rear axle * Excavator boom cradle above the rear axle to end of incline approx. 2,300 x 740 x 190 mm * 2 wheel wells per side, approx. 640 mm wide – front 340 mm deep, rear 220 mm deep – with sliding cover (storage for covers at the front on the turntable platform) for transporting wheel loaders with 3,100 - 3,640 mm wheelbase * Mechanical drop-down supports at the rear * Hydraulic folding ramps with hydraulically deployable tip section approx. 4,650 x 720 mm * Hydraulic lateral ramp shift * Loading area above fifth wheel: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm, loaded height approx. 890 mm +/- 20 mm (incl. 860 mm approach slope) * Chassis, turntable, folding outriggers, rear supports, and ramps hot-dip galvanized * Axles, air tanks, and drawbar painted black * Tires: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Subject to change and prior sale * Immediately available ex Egestorf

Condition: new, maximum load weight: 38,620 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, Year of construction: 2026, T5 Profile 50.0: ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm when lifted) * Last axle steerable (locking of trailing axle can be performed from the cab for maneuvering purposes, without installation on the truck side, as well as additionally by switch on the trailer); lock must be disengaged before driving on public roads * Forced lifting and forced lowering of the lift axle for maneuvering purposes (truck-side installation required) with speed-dependent control via the EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: * Drawbar 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as infotool with pressure sensors to display total axle load per axle group * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * LED lighting system 12/24 V * Removable LED beacon (rear) ----General Attachments: * Mechanical warning sign package for 3 m total width * Toolbox made of galvanized steel sheet approx. 650 x 300 x 600 mm, mounted left side * Plastic wheel arches front axle and galvanized steel sheet mudguards on rear axle ----Low Loader Platform: * Turntable platform extension with 45° corners and 3 storage compartments with lockable folding lids (lids open to the rear) * Shortened low bed platform by 500 mm to 6,280 mm including extended stepped transition 500 mm forwards * Rubber covering on foldable frame, approach slope, and on the running surface of the low loader platform * Bamboo wood between the longitudinal beams in front of the excavator stick holder ----Load Securing (LaSi Package): * 2 x 6.4 t lashing rings at the front corners * 2 x 13.4 t UVV-compliant lashing points each at the front and rear side corners * 5 x 10 t UVV-compliant lashing rings per side (swiveling and lowerable, loadable in all directions) * 4 stake pockets per side, also 2 t lashing capability * 1 x 16 t UVV-compliant lashing point on the rear cross member ----Widening: * Extendable and foldable widening outriggers for 3 m overall width (board bracket holder under chassis, right side) ----Excavator Stick Holder: * Continuous excavator stick holder with reinforced profile from last axle to end beam, approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV-compliant lashing rings on the sides of the stick holder ----Ramps: * Hydraulic folding ramp with double-acting hydraulics and extendable tip section, approx. 4,650 x 720 mm incl. load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump outputs in the truck above 40 l/min, max. 140 l/min) Gusdpfx Aasxptn Dj Sea ----Loading Height: * Loaded: 890 mm +/- 20 mm (via air suspension) ----Loading Area Dimensions: * Deck above turntable: 2,600 + 390 x 2,520 mm * Low bed area: 6,280 + 500 x 2,520 mm incl. 860 mm approach slope ----Paintwork: * Chassis, bogie, drawbar, extension consoles, access ramps hot-dip galvanized * Towing fork, axles, hydraulic axle supports, as well as air tanks painted in black ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: Immediately available*

Condition: used, overall weight: 2,100 kg, axle configuration: 2 axles, first registration: 10/2021, total width: 2,150 mm, total height: 2,330 mm, Equipment: crane, Very well-maintained trailer-mounted work platform with a working height of 16 m, a basket load capacity of 200 kg, and a lateral outreach of 9.45 m, equipped with a power supply to the basket and including a generator. UVV inspection was carried out by Paus in March 2026. Gsdpfx Asyw Ergoa Soua GT 16 AG Work Platform Working height: 16 m Telescopic design Lateral outreach: 9.45 m Basket load capacity: 200 kg 220 V power supply to the basket Including generator Fully hydraulic outriggers Outrigger width: 4.08 m Outrigger length: 4.29 m Continuous 360° rotation Overall length: 6.31 m Transport width: 2.15 m Transport height: 2.33 m Weight: 2,100 kg Financing available through our partner banks; we are happy to assist you. We explicitly reserve the right to prior sale, as this item is also listed on other platforms. Accessory information is provided without guarantee. Changes, prior sale, or errors excepted. We offer and highly recommend viewing and inspection to avoid any misunderstandings regarding condition and suitability for the buyer. Viewings and inspections are possible at any time by prior appointment and are expressly encouraged.

Condition: used, maximum load weight: 17,520 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 01/2013, loading space length: 9,100 mm, loading space width: 2,480 mm, loading space height: 600 mm, total width: 2,550 mm, total height: 1,720 mm, Equipment: ABS, 3-Axle Zikun ZK-AD3-PRXX Flatbed Container Trailer Gjdpjyadu Rofx Aa Seua VIN: Z04127 Chassis / Attachments: * Air suspension with lift and lower function * Lifting axle * 3 x SAF axles with disc brakes * Tyres: 265/70 R19.5 * Remaining tread: Front ~60%, Centre ~80%, Rear ~80% * Twin tyres * 2 x PVC storage boxes * Storage basket on the left * Ride height approx. 1.10 m Body: * Zikun flatbed * Side walls 600 mm * Kinnegripp folding stanchions * Steel floor, checker plate * 5 container locks per side * 8 pockets for container locks per side * 14 heavy-duty lashing rings per side * 6 heavy-duty lashing rings recessed into floor per side * Edscha sliding roof * Lashing rings * Dimensions: 9,100 mm x 2,480 mm x 600 mm * 22 pallet spaces Weights: * Gross weight: 24,000 kg * Unladen weight: 6,480 kg * Payload: 17,520 kg Other Details: * 1 previous owner * New MOT (main inspection) possible * Very good condition New main inspections / safety checks or weight downgrades/upgrades available on request. We are happy to assist you in obtaining export/transfer licence plates and can also arrange delivery of your purchased vehicles within Germany. Contact us! ---- We speak German, English, and Russian! ---- No liability for misprints or typographical errors. Subject to changes, prior sale, and errors! ---- Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With our many years of experience in the reconditioning and sale of commercial vehicles, we are a reliable partner for customers worldwide. Our particular strength lies in the sale of new and used commercial vehicles. On 11,000 sqm we offer a wide range of vehicles. Our corporate philosophy is characterised by fairness and professionalism. Customer satisfaction is very important to us, so we offer our clients an excellent all-around service package and provide them with a competent contact person to guide them through the purchase or sale of vehicles. See for yourself! Our services for you: Loading of vehicles We are happy to assist in loading your purchased vehicles. Organisation of special transports We are happy to assist in organising special transports. Temporary/export licence plates We are happy to assist in obtaining export or short-term licence plates. Customs formalities We are happy to assist with customs matters.

Condition: used, maximum load weight: 1,007 kg, overall weight: 1,500 kg, axle configuration: 1 axle, first registration: 03/2026, loading space length: 3,070 mm, loading space width: 1,870 mm, loading space height: 100 mm, total width: 1,960 mm, total height: 925 mm, A66 GW26NG000373 100 km/h type approval Platform trailer Support wheel Loading ramps Errors and prior sale reserved Guodpfx Aasyq U Enj Sja

Condition: new, maximum load weight: 16,500 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, Year of construction: 2026, Equipment: ABS, tail-lift, Müller-Mitteltal ETÜ-TAR 21 Tandem - Low loader | Flatbed Overrun Trailer Reference number for inquiries: 11630 Vehicle available immediately ex-stock Alsdorf NEW VEHICLE incl. COC * Gross weight: 21t, net payload: 16.50t, galvanized chassis * Flatbed version with 400mm high front wall, ramp safety system using ramp retaining rods and diagonal supports Gedpfeyvxg Uex Aa Sjua * Version with 21t gross weight: reinforced frame and axle, axle spacing 1,810 mm * Floor height approx. 910 mm loaded / approx. 940 mm unladen * 7m loading bed with 400 mm high front wall * Extended ramps: 3m hot-dip galvanized, one-piece ramps with galvanized grating * Ramp assist system with vertically mounted, adjustable springs for easy single-person operation * Load securing package: * 4 UVV-compliant folding lashing brackets (LC 8,000 daN) installed into existing 45° outer frame hole pattern, positioned approx. 1m in from front and rear crossmembers * 10 UVV-compliant retractable lashing brackets LC 3,000 daN in outer frame's existing hole grid * 2 UVV-compliant retractable lashing rings at front & rear in crossmembers (LC 10,000 daN) * Additional lashing points via drilled holes (Ø 50 mm, LC 1,200 daN) in front and rear end crossmembers * Prepared for retrofitting container locks (container locks available and optional at extra cost) * Softwood floor, 50mm thick * Gigant axles with air suspension including EBS 2S/2M, ride height control (raise/lower) * 235/75R 17.5 (8x) twin tyres with tire pressure monitoring sensors * Plastic toolbox mounted in front of front wall, right-hand side (in the direction of travel) * LED lighting system * 7-pin socket on rear, wired for marker/oversize lighting with taillight (58R) and ground * 2 LED reversing lights at the rear * Flashing side marker lights * Oversize warning board * 1 removable all-round amber LED beacon with holder and installation * Folding rear supports, front support leg with gear winch ---- Example lease offer from our partner MMV Leasing: €655/month net, 60-month term, zero down payment, zero final residual payment Other terms possible, with/without down payment and/or residual value! We are official Müller-Mitteltal representatives ---- Our opening hours: Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside these hours by appointment! Languages spoken: German, English, Russian, Polish, French WhatsApp available

Condition: new, maximum load weight: 12,451 kg, overall weight: 16,000 kg, axle configuration: 3 axles, Year of construction: 2025, Equipment: ABS, * Extendable loading area * Knorr air brake system * 3 axles with drum brakes Gsdpfx Ajyvnwisa Sjua * Front and rear grilles ----* Tire size: * Technical gross weight: 16,000 kg * Unladen weight: 3,540 kg * Overall length: ----Vehicle number: 11937----Subject to errors and prior sale----Advertisement and various lettering have been digitally removed. -----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions and we will take care of them for you. Among other services, we can offer you the following for an additional fee:----Trade-in of your old vehicle TÜV/SP inspection Complete export processing Financing arrangements Assistance with export license plates Transport of vehicles Vehicle registration Recovery and vehicle transport---- YOUR VTS TEAM

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: * EBS brake system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle compensation Guodpex Ipa Nsfx Aa Sea * Lateral underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign boards at front and rear * Closed plastic mudguards at the front axle and straight galvanized steel splash aprons at the rear axle, each with mud flaps * Side and rear reflective contour marking tape * Hinged cover (hot-dip galvanized) for toolbox in the turntable platform * Multi-voltage system * LED tail lights * Removable beacon at rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin power connector * 4 stake pockets on each side (stakes not included) with integrated lashing points * Load securing package consisting of: 2 lashing eyes (6.4 t) at front left & right on the main frame of the turntable platform, 5 pairs of UVV folding & lowering lashing rings, loadable in all directions and recessed into the outer frame – 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for a total width of 3 m (not at the rear taper) * Widening boards stored in the center of the loading area * Excavator arm rest over rear axle up to end cross member approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side of the excavator arm rest) * Mechanical one-piece loading ramps with spring mechanism (approx. 3,000 x 720 mm) * Mechanically controlled lateral ramp adjustment * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm approach angle) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Technically possible gross weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Condition: used, maximum load weight: 949 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 02/2026, loading space length: 4,010 mm, loading space width: 188 mm, loading space height: 110 mm, total width: 2,450 mm, total height: 860 mm, A13 GW2616429 Multi-transporter 4018, manuf. TEMARED, type DMC Gross weight: 1300 kg, 400x184 cm, overrun braked, 100 km/h (accessory), with foldable loading ramp (accessory), low loader, height-adjustable Loading height: 400 mm Gjdpfxeym Igds Aa Sjua Subject to errors and prior sale

Condition: new, maximum load weight: 23,940 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2025, * T3 Profi 30.0: * EBS brake system * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 ton Gigant axles * Parabolic springs, mechanical axle compensation at the rear Guodel Th I Aspfx Aa Sea * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning plate packages at front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray protection * Side and rear reflective contour tape * Tool box made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for the tool box on the turntable platform * Multi-voltage electrical system * LED tail lights * Removable rotating beacon at rear * Coupling arm with 50 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pole power connector * Four stake pockets per side (no stakes included), with integrated lashing points * Load securing package comprising: 2 lashing eyes (6.4 t) at front left & right on the main frame of the turntable platform, 6 pairs of swiveling and lowerable UVV lashing rings, loadable in all directions and recessed into the outer frame – 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not in the rear slope) * Widening planks stowed in the center of the loading platform * One-piece hot-dip galvanized hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way control block for retrofitting hydraulic side ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height: approx. 910 mm (including 860 mm approach angle) * Chassis, turntable, towing arm and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * Approx. 5,980 kg unladen weight * Technical permissible gross weight: 30,000 kg * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from CW 11/2026

Condition: new, maximum load weight: 30,740 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Year of construction: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting and lowering device and RtR valve * SmarD on-board system for load weight determination * Warning sign packages front & rear * Reflective contour tape on sides and rear * Removable rotating beacon at the rear * LED lights * Straight drawbar with 50 mm towing eye and infinitely adjustable height * Tool box made of powder-coated steel and spare wheel holder in basket design, mounted on the right side * Enclosed plastic single fenders at the front * Straight steel mudguards at the rear, each with spray suppression (anti-spray system) * Side underrun protection * Turntable platform extended by 520 mm with 45° corners and 3 integrated storage compartments incl. cover, lockable * Chassis made of high-strength fine-grained steel * Floor over turntable platform made of 50 mm softwood, in the low-bed platform made of 60 mm softwood * Outer planks of the loading ramps made of hardwood Gedpfxol Tik Ne Aa Sjua * 4 stake pockets on each side (no stakes included) with simultaneous 2 t lashing point per pocket * Load securing package consisting of: 2 lashing points 6.4 t at the front left and right on the main frame of the turntable platform * 2 pairs of 13.4 t lashing rings each at the outer frame front and rear, as well as 4 pairs of 10 t lashing rings per side, swiveling and retractable * Loadable in all directions and recessed into the outer frame * 2 pairs of 6.4 t lashing rings in the excavator arm rest area * 8 pairs of galvanized swing-out marker boards for 3 m total width (not at the rear slope) * Widening planks stored in a compartment on the left side * Excavator arm rest above rear axle up to end of approach ramp approx. 2,100 x 740 x 190 mm * Mechanical drop-down supports at the rear * Hydraulic folding ramps with hydraulically adjustable tip, approx. 4,650 x 720 mm incl. hydraulic lateral ramp shifting and load-holding valve * Loading area across the turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height loaded: approx. 890 mm, +/- 20 mm (incl. 860 mm approach slope) * Flow divider installed * Chassis, turntable, access ramps, flip-out marker boards and mechanical drop-down supports hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in black * Tires: 235/75 R 17.5 * New vehicle without first registration, with manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf on the A7