Used Müller-Mitteltal Low Loader / Lowbed Trailers for sale (262)

Condition: used, empty load weight: 6,500 kg, maximum load weight: 23,500 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 06/2010, suspension: steel, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Vehicle is sold on behalf of a customer, partly wooden boards def., 17 pairs of lashing eyes, , loading height approx. 900 mm, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Pedpfx Ahsx N Rr Aozsha

Condition: used, empty load weight: 4,580 kg, maximum load weight: 13,420 kg, overall weight: 18,000 kg, first registration: 07/2019, loading space length: 6,500 mm, loading space width: 2,440 mm, loading space height: 600 mm, suspension: air, tire size: 235/75 R 17,5, color: silver, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: in transit, 2 axles, BPW axles, tandem, air suspension, lifting and lowering, ABS (anti-lock braking system), lashing eyes, attachable loading ramps, rear support, twin tires, storage box, height-adjustable drawbar, removable side panels. Body: Foldable and removable aluminum side panels, foldable corner and central posts, 50 mm towing eye, ramp compartment, galvanized frame, removable corner and central posts, ramps available at an extra cost of EUR 1,000, also available with matching vehicle (89076). Data subject to change as the vehicle is in transit! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Psdpfx Ahox N A Ayezoha

Condition: used, maximum load weight: 23,940 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 02/2017, Müller Mitteltal 3 axle low loader trailer with ramps type T3 Profi Total weight 24,000 / 30,000 kg Payload 17,940 / 23,940 kg Empty weight 6,060 kg Total length 10,800 mm Loading length 8,300 mm / loading bed 6,500 mm Loading height 900 mm Pedpfx Ahsv Hl Rijzsha Parabolic suspension Wider extensions with warning signs Large lashing package Long ramps with spring jack Tool box Storage box in offset Vehicle is available immediately. Other 3 and 4 axle low loader trailers, new and used, available immediately More information at:

Condition: used, empty load weight: 8,490 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 09/2022, loading space length: 9,650 mm, suspension: air, tire size: 235/75 R17,5, Equipment: ABS, EBS Drum brake Phedpfox Nn R Ajx Ahzsa Color RAL 7046 telegrey Drum brake Cargo area width 2,550 mm / 3,000 mm Unladen weight 8,490 kg Gigant axles Hydraulic ramps + displacement Smartbord Lifting and lowering device front axle + rear axle Excavator bucket recess Errors excepted

Condition: new, maximum load weight: 8,670 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2025, * KA-TA-R 11.9 Masterline: ----Brakes: * Wabco EBS * Emergency release system for spring brake cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Eye: * Height-adjustable hot-dip galvanized drawbar, adjustable by 300 mm, with 40 mm flange eye ----Electrics / Lighting: * RDÜ tire pressure monitoring system * LED lighting * 15-pin power connector ----General Attachments: * Tool box made of galvanized sheet steel, mounted on the right-hand side * Bolted underrun protection * Plastic quarter mudguards * Jost mechanical landing gear at the front * Rear, 2 mechanical, hot-dip galvanized folding support legs ----Tipper Platform: * Net hooks on the sides and rear in the central locking brackets, plus 3 external hooks on the front wall * Hot-dip galvanized chassis * Steel platform, 3-way tipper body * Continuous drop sides without center stanchion, foldable, with drop side spring assist * Tailgate foldable and swinging via manual central locking * Hot-dip galvanized, bolted rear stanchion * 4 mm steel floor plate * Rear mounting rail for loading ramps ----Load Securing: * 1 flush-mounted, foldable 5 t lashing ring in each corner Psdpfoq Hg Dxex Ahzeha * Plus 4 flush-mounted, foldable 3 t lashing rings per side in the outer frame ----Ramps: * 1 pair aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment for ramps recessed under the loading platform in the chassis at the rear ----Tires: * Tires: 235/75 R 17.5 ----Paintwork: * Axles, springs, air tanks, drawbar, and landing gear painted in a shade of black * Sideboard painted in RAL 9010 pure white * Painting of side panels in other RAL colors available at extra cost * Floor and front wall hot-dip galvanized ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available from Egestorf

Condition: used, overall weight: 31,500 kg, axle configuration: 3 axles, first registration: 05/2016, next inspection (TÜV): 07/2026, loading space length: 7,500 mm, loading space width: 2,540 mm, Equipment: ABS, * Faymonville Max 300 Tridem Low Loader Trailer * First registered 05/2016, Luxembourg registration, TÜV valid until 07/2026 * Gross weight: 31.5t (24t in the country of registration) * Unladen weight: 7,065t * SAF axles, air suspension, raise/lower function * ABS/EBS * Twin tires * 235/75R 17.5 * 1st axle: lift axle (11/11-11/11mm) * 2nd axle: (9/9-9/9mm) * 3rd axle: steering axle with lock valve (6/6-8/8mm) * Drawbar with 50mm towing eye, approx. 88cm coupling height, adjustable plate +/- 10cm * Load area: 7.50m, rear end 1m chamfered, wooden floor, central chequer plate section, rear approx. 1.68m wood flooring * Width: 2.54m + approx. 0.23m side extensions * Loading height: approx. 92cm * Front wall: 40cm * 2 heavy-duty lashing eyes on the front wall * 6 pairs of retractable lashing rings in the outer frame Pedex Iaq Sopfx Ahzeha * 5 pairs of stake pockets in the outer frame * Hydraulic ramps: 2.93m x 0.8m with timber covering, can be manually pushed together * Rear fitting for rotating beacon * 2 x LED reverse lights * 2 stainless steel toolboxes * Empty compartment for extension beams * 2 folding supports at the rear * Vertical load: 1t ---- Our business hours: * Monday – Thursday: 08:00 – 17:00 * Friday: 08:00 – 15:00 * WhatsApp: * Outside of business hours we are available by appointment * We speak German, we speak English, ????? ?? ????? ?????, mowimy po polsku, on parle francais * Leasing, financing, and trade-in possible

Condition: new, suspension: other, color: other, gearing type: other, driver cabin: other, emission class: none, Leveling bracket for low-loader semi-trailer including container closures, price per leveling bracket, , --  Subject to printing errors, mistakes and changes, sample images --, More information at: !, More details: ! Phodpexpwh Isfx Ahzea

Condition: new, maximum load weight: 8,650 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2025, * KA-TA-R 11.9 Masterline ----Brakes: * Wabco EBS * Emergency release device for spring-loaded brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization aggregate ----Drawbar / Coupling Eye: * Height-adjustable drawbar (adjustable by 300 mm) with 40 mm flange coupling eye ----Electrics / Lighting: * RDÜ Tyre Pressure Monitoring System * Multivoltage * 15-pin power connector * 12 V 13-pin auxiliary cable * Extended connection cables for forestry and agricultural towing vehicles * LED tail lights ----General Attachments: * Mechanical landing gear at the front * 2 mechanical folding supports at the rear * Right-side plastic tool box * Two-step entry on the front left (in direction of travel) * Bolted underride guard * Plastic quarter mudguards ----Tipping Platform: * Net hooks on the sides and rear in the central locking bearings and 2 at the front wall * Steel pallet three-way tipper body (continuous side walls - without intermediate stanchions - foldable with board-side spring assist, tailgate foldable and swinging via manual central locking) * 4 mm steel floor plate * Rear ramp holder rail ----Load Security: * Each corner equipped with 1 x 5 t lashing ring * 4 x 3 t recessed lashing rings per side in the outer frame ----Ramps: * 1 pair of aluminium loading ramps approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment at the rear of the chassis, under the loading platform ----Tyres: Phsdpfx Aol Thw Ijhzsa * Tyres 385/55 R 19.5 ----Paintwork: * Chassis, drawbar, tipping body, front wall, side panels, folding supports, and rear stanchions hot-dip galvanized. Axles, springs, air tanks, flange coupling eye, and landing gear painted in black. Side panels hot-dip galvanized. ----Notes: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Immediately available from Egestorf

Condition: used, empty load weight: 8,850 kg, maximum load weight: 31,150 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 08/2019, suspension: steel, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Total loading platform length approx. 9,500 mm, lowbed loading platform length approx. 7,360 mm, loading height approx. 910 mm, 14 pairs of lashing eyes. Vehicle is offered on behalf of the customer. -- Subject to errors, misprints, and changes. Sample images -- More data at: !, More Details: ! Podpfxsx Hpyao Ahzoha

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 to. BPW Eco axles * Parabolic suspension * Mechanical axle equalization at the rear * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle with closed plastic mudguards; rear axle with straight, galvanized steel skirts, each with splash protection * Reflective contour tape on sides and rear * Foldable (hot-dip galvanized) lid for the toolbox in turntable platform * Multi-voltage electrical system * LED tail lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye and adjustable height via drawbar spring and turnbuckle * 15-pin power connector Phsdpfxsx Ipbte Ahzoa * Four stake pockets per side (stakes not included), each with integrated lashing options * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform, 5 pairs of UVV lashing rings, swiveling and lowerable, loadable in all directions and recessed into the outer frame – in the corners rated 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not on the rear slope) * Widening boards stored in the center of the loading area * Digger stick rest over the rear axle up to the end beam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides within the digger stick rest) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * Hydraulic lateral ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen load height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen load height approx. 910 mm (including 860 mm approach slope) * Chassis, turntable, drawbar and loading ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Technical possible gross weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Errors and prior sale excepted * Available from calendar week 12 / 2026 * Sample images

Condition: used, empty load weight: 7,340 kg, maximum load weight: 22,660 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 05/2012, loading space length: 9,200 mm, suspension: steel, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length approx. 9,200 mm, loading height approx. 900 mm, 16 x lashing eyes, , Vehicle is sold on order , , , -- Subject to misprints, errors and alterations, sample pictures --, More data under: !, More Details: ! Phedpox Hpu Refx Ahzsa

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 to. BPW Eco axles * Parabolic suspension * Mechanical axle equalization at the rear * Side underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle with closed plastic mudguards; rear axle with straight, galvanized steel skirts, each with splash protection * Reflective contour tape on sides and rear * Foldable (hot-dip galvanized) lid for the toolbox in turntable platform * Multi-voltage electrical system * LED tail lights Psdex Ipbgopfx Ahzoha * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye and adjustable height via drawbar spring and turnbuckle * 15-pin power connector * Four stake pockets per side (stakes not included), each with integrated lashing options * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform, 5 pairs of UVV lashing rings, swiveling and lowerable, loadable in all directions and recessed into the outer frame – in the corners rated 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not on the rear slope) * Widening boards stored in the center of the loading area * Digger stick rest over the rear axle up to the end beam, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides within the digger stick rest) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * Hydraulic lateral ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen load height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen load height approx. 910 mm (including 860 mm approach slope) * Chassis, turntable, drawbar and loading ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Technical possible gross weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Errors and prior sale excepted * Available from calendar week 12 / 2026 * Sample images

Condition: used, empty load weight: 5,750 kg, maximum load weight: 24,250 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 01/1993, suspension: steel, tire size: 235/75R17,5 141/140J, color: other, gearing type: other, front tire size: 235/75R17,5 141/140J, rear tire size: 235/75R17,5 141/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, , -- Misprints, errors and omissions excepted, sample pictures --, More details under: !, More Details: ! Phjdpfx Aex Hpuwohzsa

Condition: new, maximum load weight: 8,410 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2025, * KA - TA - R 11.9 ----Braking System: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: Podpsxf Skpsfx Ahzsha * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (300 mm range) with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with in-cab display via EBS signal – no installation required on the truck side * 15-pin power connector * LED lighting system, 12/24 V * 2 LED reversing lights at the rear (activated via reverse gear) ----General Attachments: * Mechanical BPW landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox, approx. 750 x 350 x 300 mm, mounted on the right side of the chassis at the front * Bolt-on underrun protection * Plastic quarter mudguards * Two-step access in front of the bulkhead, driver’s side ----Chassis: * Chassis made of fine-grain steel ----Tipping Body: * Net hooks at each central locking bearing and two on the bulkhead * Steel palletised 3-way tipper body with reinforced 600 mm heavy-duty drop sides * Continuous top side walls with internal tube reinforcement – no central stanchions – foldable with drop side spring assist * Rear stanchions bolted * Combination steel double-wing rear doors, asymmetrically split, swivel 270° and lockable (not foldable) with additional swing frame for automatic tailgate opening during tipping * Locking via galvanized rotary bar lock at the rear and central locking * Deactivation function for automatic tailgate during reverse tipping with opened wing doors * Mounting rail at the rear for loading ramps ----Load Securing: * 1 x 5 t lashing point in each corner and 4 x 3 t lashing eyes recessed in the side outer frame * 4 mm floor plate made of S 420 MC 4 fine-grain steel ----Ramps: * 1 pair of aluminum loading ramps (approx. 3,310 x 400 x 105 mm, load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area at the rear of the chassis ----Paintwork: * Chassis, drawbar, tipper body, bulkhead, underrun protection, rear stanchions, rear folding supports, and access step galvanized * Side walls and tailgate painted in RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in a shade of black ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex works Egestorf

Condition: used, empty load weight: 6,500 kg, maximum load weight: 23,500 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 06/2010, suspension: steel, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Vehicle is sold on behalf of a customer, partly wooden boards def., 17 pairs of lashing eyes, , loading height approx. 900 mm, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Pjdpfx Aex Hpu Djhzeha

Condition: new, maximum load weight: 8,410 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2025, * KA - TA - R 11.9 ----Braking System: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (300 mm range) with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with in-cab display via EBS signal – no installation required on the truck side * 15-pin power connector * LED lighting system, 12/24 V * 2 LED reversing lights at the rear (activated via reverse gear) ----General Attachments: * Mechanical BPW landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox, approx. 750 x 350 x 300 mm, mounted on the right side of the chassis at the front * Bolt-on underrun protection * Plastic quarter mudguards * Two-step access in front of the bulkhead, driver’s side ----Chassis: * Chassis made of fine-grain steel ----Tipping Body: * Net hooks at each central locking bearing and two on the bulkhead * Steel palletised 3-way tipper body with reinforced 600 mm heavy-duty drop sides * Continuous top side walls with internal tube reinforcement – no central stanchions – foldable with drop side spring assist * Rear stanchions bolted * Combination steel double-wing rear doors, asymmetrically split, swivel 270° and lockable (not foldable) with additional swing frame for automatic tailgate opening during tipping * Locking via galvanized rotary bar lock at the rear and central locking * Deactivation function for automatic tailgate during reverse tipping with opened wing doors * Mounting rail at the rear for loading ramps ----Load Securing: * 1 x 5 t lashing point in each corner and 4 x 3 t lashing eyes recessed in the side outer frame * 4 mm floor plate made of S 420 MC 4 fine-grain steel ----Ramps: * 1 pair of aluminum loading ramps (approx. 3,310 x 400 x 105 mm, load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area at the rear of the chassis ----Paintwork: * Chassis, drawbar, tipper body, bulkhead, underrun protection, rear stanchions, rear folding supports, and access step galvanized * Side walls and tailgate painted in RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in a shade of black ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: Phsdpfx Asxf Sk Ashzoa * Available immediately ex works Egestorf

Condition: used, empty load weight: 4,550 kg, maximum load weight: 13,450 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2016, loading space length: 6,540 mm, loading space width: 2,480 mm, suspension: air, tire size: 235 / 75 R 17,5, color: beige, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, 10 pairs of lashing eyes, loading height approx. 900 mm, , customer vehicle, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Psdpfx Ahsx A Dvlszoha

Condition: new, maximum load weight: 8,850 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2024, * KA-TA-R 11.9 "Masterline" ----Brakes: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 ton BPW axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Eye: * Drawbar height-adjustable by approx. 300 mm with 40 mm flanged towing eye ----General Attachments: * Jost mechanical support winch at front * Two mechanical, hot-dip galvanized folding support legs at rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Bolted underride guard * Plastic quarter fenders ----Electrics / Lighting: * 15-pin power connector * LED lighting * TPMS (Tire Pressure Monitoring System) ----Tipper Bed: * Net hooks on the sides and rear, fitted to the central locking bearings, plus 2 on the front bulkhead * Steel pallet 3-way tipper body (continuous sidewalls - without center stanchions - foldable with drop-side spring assist) * Rear stanchions bolted * Steel combination swing doors at the rear, asymmetrically split, 2-leaf, can be swung and locked to 270°, not foldable – also equipped with additional swinging frame for automatic tailgate opening during tipping. Locking via galvanized rotary bar lock and central locking system * Deactivation function for automatic tailgate during rear tipping with open swing door * 4 mm steel floor plate * Mounting rails at the rear for loading ramps ----Load Securing: * One 5 ton lashing point in each corner * Four 3 ton lashing rings recessed into the outer frame on each side ----Ramps: * One pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 tons/pair), suitable for rubber-tired & tracked vehicles * Lockable storage compartment under the load area, inset into the chassis, accessible from the rear Phsdel Thymepfx Ahzja ----Paintwork: * Drawbar, front wall, tipper bed, rear stanchions, underride guard, mechanical support legs hot-dip galvanized * Sidewalls and tailgate painted RAL 9010 pure white * Other RAL shades for sidewalls available at extra cost * Axles, springs, towing eye, air tanks, and support winch painted black ----Other Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without initial registration, with manufacturer's warranty * Subject to prior sale and errors ----Delivery Time: * Immediately available from Egestorf on the A7

Condition: used, empty load weight: 7,180 kg, maximum load weight: 22,820 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 03/2018, next inspection (TÜV): 07/2026, loading space length: 9,000 mm, suspension: air, tire size: 235/75R17,5 ---/140J, color: other, gearing type: other, front tire size: 235/75R17,5 ---/140J, rear tire size: 235/75R17,5 ---/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length approx. 9,000 mm, loading height approx. 900 mm, insertable stakes, -- printing errors, mistakes and changes reserved, sample images --, More data at: !, More details: ! Pedpfx Ajx A Du Uehzeha

Condition: new, maximum load weight: 10,980 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ - TA -R 14.4 ----Brake: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange-eye: * Drawbar adjustable in height by 300 mm (drawbar extension by 250 mm up to 2,250 mm) * 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal (no installation required on the truck side) * 15-pin electrical connector * LED tail lights 12 / 24 V * LED rotating beacon (removable) at the rear ----General attachments: * Support winch at the front * Externally mounted galvanized foldable supports at the rear * Plastic toolbox approximately 858 x 500 x 500 mm mounted front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low-loader platform: * Provision in front of the bulkhead for retrofitting container locks * Bolted smooth sheet steel bulkhead * Side panels made of trapezoidal-profiled sheet steel, foldable with drop-side spring assist * Rear wall made of steel, slidable between the ramps (mounting bracket for stowing in front of the bulkhead when not in use) * Bolted rear stanchions * Rear approach angle approx. 860 mm ----Flooring: * 50 mm softwood floor * 12 mm thick and 270 mm wide rubber covering strip on the inside of the drive-up ramps * On the approach slope as well as on the outside of the low-loader platform (from bulkhead to rear end beam) 12 mm thick and 210 mm wide rubber covering strips ----Load securing: * Perforated outer frame, approx. 45 degrees bent, with 2 t lashing capacity every 480 mm * Installation of 3 t drop lashing brackets possible every 600 mm * In the corners front and rear, each with 1 x 6.3 t lashing ring * Various holes in the front and rear end beams for 1.2 t lashing options ----Ramps: * One-piece mechanical mesh ramps with spring mechanism for one-man operation approx. 2,750 x 870 mm (collapsible down to 20 mm) ----Paintwork: * Chassis, drawbar, bulkhead, tailgate and ramps hot-dip galvanized * Axles, springs, air tanks and flange towing eye painted in a shade of black * Side panels painted in RAL 9010 pure white ----Info: * -- Reinforced and certified body according to EN 12642 XL including load securing certificate -- * Errors and prior sale excepted * New vehicle with manufacturer's warranty Podox Ipbaspfx Ahzjha * Sample photos (pictures of the vehicle may vary due to special equipment) ----Delivery time: Vehicle available from week 10/2026

Condition: used, empty load weight: 7,340 kg, maximum load weight: 22,660 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 05/2012, loading space length: 9,200 mm, suspension: steel, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length approx. 9,200 mm, loading height approx. 900 mm, 16 x lashing eyes, , Vehicle is sold on order , , , -- Subject to misprints, errors and alterations, sample pictures --, More data under: !, More Details: ! Phodox A Dkcepfx Ahzsa

Condition: new, maximum load weight: 10,980 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ - TA -R 14.4 ----Brake System: Phjdpfjx Ipapex Ahzoa * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Towing Eye: * 300 mm height-adjustable drawbar – drawbar extension by 250 mm to 2,250 mm * 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * 15-pin power connector * LED tail lights 12 / 24 V * LED rotating beacon (removable) at the rear ----General Attachments: * Support winch at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm at the front right exterior on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * Fittings in front of the bulkhead for subsequent installation of container locks * Bolted smooth sheet bulkhead * Side walls made of steel – trapezoidal profile – foldable with sideboard spring lift * Steel rear wall, insertable between the ramps – storage holders inside front bulkhead when not in use * Bolted rear stanchions * Rear approach slope approx. 860 mm ----Flooring: * 50 mm softwood floor * 12 mm thick and 270 mm wide rubber strip on the inside of the loading ramps * On the approach slope as well as outside on the low-loader platform (from bulkhead to end cross member) each with 12 mm thick and 210 mm wide rubber strips ----Load Securing: * Perforated outer frame bent at approx. 45 degrees with 2 t lashing capacity every 480 mm * Provision for 3 t folding lashing brackets every 600 mm * Each corner front and rear with 1 x 6.3 t lashing ring * Various holes in the front and rear cross members for 1.2 t lashing options ----Ramps: * Single-piece mechanical grating loading ramps with spring mechanism for one-man operation, approx. 2,750 x 870 mm (can be collapsed to 20 mm) ----Paintwork: * Chassis, drawbar, bulkhead, tailgate, and loading ramps hot-dip galvanized * Axles, springs, air reservoirs, and flange towing eye painted in black shade * Side walls painted RAL 9010 pure white ----Information: * --reinforced and certified body according to EN 12642 XL including load securing certificate-- * Subject to errors and prior sale * New vehicle with manufacturer’s warranty * Sample pictures (vehicle images may differ due to special equipment) ----Delivery Time: Vehicle available from week 10 / 2026

Condition: new, maximum load weight: 20,200 kg, overall weight: 27,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TR 27.0 flatbed: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with lifting and lowering system, with RTR function * 1st axle liftable * Rear axle with trailing steering function and electro-pneumatic steering lock via PIN reverse gear (trailing axle lock, operable from the tractor unit for maneuvering purposes – no truck-side installation required – assigned to PIN 10 in the 15-pin connector, for maneuvering only, not for public road use) * SmartBoard control box as infotool with pressure sensors for total axle load display * Tire pressure monitoring system with display option in the truck via EBS signal, no truck-side installation required * Fixed center drawbar with 50 mm flange towing eye (loaded 900 mm, mm height adjustment at the head plate) * Mechanical landing gear at front, mechanical swing-down supports at rear of the chassis * Mechanically adjustable warning sign package at front and rear * Toolboxes made of galvanized sheet steel, powder-coated black, approx. 650 x 300 x 600 mm, mounted on right side * Hydraulic flow divider * Continuous side walls (without center stanchion) up to the beavertail * Folding rear stanchions * Steel rear wall slid in front of the rear stanchions * 15-pin electrical socket * LED tail lights * Removable LED beacon incl. bracket and installation * 2 x LED reversing lights at the rear of the vehicle (switched via reverse gear) * Flashing LED side marker lights Phodpfer Dpz Aex Ahzsa * 60 mm larch/douglas fir wooden floor * 400 mm plug-in steel front wall * Perforated outer frame, approx. 45 degrees angled, with mounts for 3 t folding lashing brackets * Each corner fitted with 1 x 10 t lashing ring; additionally 2 x 10 t and 3 x 6.3 t lashing rings per side * Various holes in the front and rear cross members for 1.2 t lashing options * Hydraulic one-piece loading ramps, approx. 3,000 x 720 mm, mechanically adjustable laterally * 4-section hydraulic valve block for potential retrofitting of hydraulic ramp shift * Chassis, drawbar, front wall, mechanical rear supports, loading ramps, and tailgate hot-dip galvanized * Axles, air tanks, flange towing eye, and mechanical landing gear at front painted in black * Hydraulic flow divider in trailer (for hydraulic pump performance in truck from over 40 l/min up to 120 l/min) * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from week 13/2026 * Sample images (pictures of the vehicle may differ due to special equipment)

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 ton BPW Eco axles Phsdpfx Aox Ipavehzja * Parabolic springs * Mechanical axle equalization at the rear * Side underrun protection * Swing-out supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle: closed plastic fenders; rear axle: straight, galvanized steel mudguards, each fitted with spray protection * Reflective contour marking tapes at the sides and rear * Folding lid (hot-dip galvanized) for the toolbox in the turntable platform * Multi-voltage system * LED tail lights * Removable beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via return spring & turnbuckle * 15-pin power socket * 4 stake pockets each side (stakes not included), also suitable for load securing * Load securing package comprising: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, foldable and lowerable, loadable from all directions and embedded in the outer frame – corner rings 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not in the rear taper) * Widening planks stored in middle of loading area * Digger arm storage from rear axle to end crossmember approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the digger arm storage) * Mechanical one-piece loading ramps with spring assist (approx. 3,000 x 720 mm) * Mechanical lateral ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Loading height unladen approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Loading height unladen approx. 910 mm (including 860 mm run-up slope) * Chassis, bogie, drawbar and loading ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * -- Permitted total weight of 30,000 kg technically possible -- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available from calendar week 12/2026 * Sample image

Condition: new, maximum load weight: 16,750 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 21.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lifting and lowering device * At front wall and rear slope, provision for retrofitting container locks for 20" container transport * Drawbar with 50 mm flange towing eye and height-adjustable drawbar * Jost landing gear front * External folding supports at rear * Plastic tool box approx. 750 x 350 x 300 mm, mounted on right side * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector Pjdoq Dyu Uopfx Ahzjha * LED lighting * Version 21 t GVW with reinforced frame and reinforced axles * Reinforcement package for drilling rig transport on chassis * 50 mm softwood floor in clamped version * At front wall, provision for retrofitting container locks * Bolted front wall made of smooth sheet metal * Split side walls made of steel sheet – trapezoidal profile – foldable with center folding stanchion * Steel rear wall can be slid in between the ramps – holder for stowage inside front wall when not in use * Rear stanchions bolted * Perforated outer frame approx. 45 degrees bent, with 2 t lashing capacity every 480 mm * Option to install 3 t drop lashing shackles every 600 mm * Each corner at front and rear with 1 x 10 t lashing ring * Load securing package with 2 x 8 t retractable lashing rings per side in the outer frame, various holes for 1.2 t lashing options in front and rear crossmembers * One-piece mechanical grating loading ramps with spring mechanism for one-man operation, approx. 3,000 x 620 mm (collapsible down to 20 mm) * Rear entry slope approx. 860 mm chassis height * Drawbar, front wall, rear flap, folding supports and loading ramps hot-dip galvanized * Axles, springs, air tanks, and landing gear painted in black tone * Loading height unladen approx. 940 mm * Loaded approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Side wall paint finish in RAL 9010 pure white * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from calendar week 15 / 2026