Used Müller-Mitteltal Three-Way Tipper Trailers for sale (237)

Condition: new, overall weight: 14,400 kg, maximum load weight: 10,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2025, * Wabco EBS * RDÜ Tire Pressure Monitoring System * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7-ton Gigant axles * Parabolic springs with tandem compensating unit Cgoliqev El Tuekh Djt * 300 mm height-adjustable hot-dip galvanized drawbar with 40 mm flange drawbar eye * Jost mechanical landing gear at the front * 2 mechanical hot-dip galvanized folding supports at the rear * 15-pin power connector * LED taillights * Hot-dip galvanized bolted underrun protection * Toolbox made of galvanized sheet steel on the right side * Plastic quarter fender * Hot-dip galvanized chassis * Steel pallet, 3-way tipping body * Continuous side walls with inner tube reinforcement at the top - without center stanchions - foldable with side wall spring jack * Tailgate foldable and swinging via manual Central locking system * Hot-dip galvanized bolted rear stanchions * 1 x 5-ton lashing ring in each corner and 4 x 3-ton lashing rings on each side. Lashing eyes embedded in the outer frame * 4 mm sheet metal floor made of fine-grain steel * Net hooks, rear mounting rail for the landing ramps * Preparation for later retrofitting of side wall extensions * Reinforced body with load securing certificate according to EN 12642 XL * 2-step step on the left side as a climbing aid * 1 pair of aluminum landing ramps approx. 3,570 x 400 mm (load capacity 8 tons per pair) suitable for rubber-tired and tracked vehicles * Rear-locking storage compartment embedded in the chassis below the loading area * Axles, springs, air tanks, and landing gear painted in a black tone * Chassis, drawbar, floor, front wall, and folding bags hot-dip galvanized * New vehicle without first registration with manufacturer's warranty * Tires 385/55 R 22.5 * Side walls painted in RAL 9010 pure white * Painting of the side panels in a RAL color is available for an additional charge. * Errors and prior sale subject to change. * Available for immediate delivery from Egestorf.

Condition: new, overall weight: 14,400 kg, maximum load weight: 11,050 kg, axle configuration: 2 axles, KA-TA-R 14.4 - Tandem Three-Way Tipper Truck - Standard payload approx.: 11,050 kg - Increased to 14.4 t gross vehicle weight with 285/70R19.5 tires - Clear dimensions: 5,000 x 2,420 x 500 mm - Loaded ground clearance: 1,040 mm - 1 chassis with underrun protection, hot-dip galvanized - Paint finish: axles with springs, air tanks, etc., in black - 3 pairs of lashing hooks recessed into the steel floor and foldable, LC 3,000 daN - ABS 2 S/2 M, 24 volts - 2 spring jacks for 500 mm high steel side walls - 1 central locking system on the left and right, swinging for undivided side walls Additional equipment: 1 pair UVV lashing rings recessed into the steel floor instead of on the steel floor 1 Hardox 450 steel floor, 4 mm thick Draw tube height adjustment via angle gear with crank operation instead of standard 1 pair of aluminum docking ramps without edge (8.0 t/pair), 35700 x 400 x 105 mm Cgsliowcy Nksqkh Det Suitable for rubber-tired and tracked vehicles Toolbox

Condition: new, overall weight: 11,900 kg, maximum load weight: 8,750 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 1,000 mm, Year of construction: 2025, Equipment: ABS, tail-lift, * Müller-Mitteltal KA-TA-R 11.9 tandem low-loader three-way tipping trailer with side walls and aluminum ramps * Inquiry number 23185 * NEW VEHICLE in RAL 9016 Traffic White * Also configurable in your desired RAL color, available mid-May 2025 * 5m x 2.42m x 0.5m + 0.5m steel extensions, 3 sides, swinging, painted, laser-welded side walls, swingable, foldable, and removable, painted with spring lift and central locking (galvanized locking) * Two-step access in front of the bulkhead (galvanized) * Lockable compartment under the tipping body for the loading ramp * Pair of 8t aluminum ramps, 3.57m long * 2 LED reversing lights on the rear * Hot-dip galvanized chassis * 4 UVV lashing rings LC 5000 daN front and rear + 8 lashing eyes LC 3000 daN recessed and foldable in the tipper floor (centered) * Side marker lights with turn signal control * Continuously height-adjustable drawbar, hot-dip galvanized, 40 mm drawbar eye * Wide tires 385/55R 19.5 (4-piece), BPW axles, parabolic springs * LED lighting system for 12 and/or 24 V * Net hooks * EBS with tire pressure monitoring * We are a Müller-Mitteltal trading partner ---- * Lease-purchase example from our cooperation partner MMV Leasing: €565 per month net for a 60-month term with no down payment and €0 remaining balance * Other terms with no down payment/residual value possible ---- Our opening hours Monday - Thursday: 8:00 a.m. - 5:00 PM Fridays 8:00 AM - 3:00 PM Outside of opening hours, we are available by appointment. We speak German, English, Polish, and French. Cgsliqkhjwbxvmo Dot WhatsApp / Facetime Leasing, financing, and trade-in are available.

Condition: used, overall weight: 11,900 kg, empty load weight: 3,100 kg, maximum load weight: 8,800 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, first registration: 04/2018, suspension: steel, tire size: 235/75R17.5, color: yellow, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, tandem, leaf spring suspension, ABS (anti-lock braking system), lashing eyes, under-tubing, front and rear outriggers, pendulum tailgates, height-adjustable drawbar. Construction: Tandem tipping trailer with loading ramps. Currently rated at 10,000 kg, can be increased to 11,900 kg. Galvanized frame, Gigant axles, drum brakes! Loading height approx. 950 mm! Loading ramps available for an additional charge of €1,000.00 net! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors! Cgjliqkowa Dwysh Djt - .

Condition: used, overall weight: 11,900 kg, maximum load weight: 8,780 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, first registration: 10/2019, Year of construction: 2019, Equipment: ABS, * Drum brakes Cjliqkov Tf T Dsh Djgt * Mount for ramps * Gigant axles * Drum brakes * Height-adjustable drawbar * and much more * Subject to errors and prior sale

Condition: used, overall weight: 11,900 kg, maximum load weight: 8,750 kg, axle configuration: 2 axles, first registration: 06/2024, Year of construction: 2023, total width: 2,550 mm, Müller Mitteltal KA-TA-R 11.9 tandem 3-way tipper with lots of extras. Total weight: 11,900kg Standard payload approx.: 8,750kg Clear dimensions: 5,000x2,420x500mm Tires: 385/55R19.5 4-layer paintwork, single color Wheels: silver Chassis/underbody protection: hot-dip galvanized Platform with bulkhead: hot-dip galvanized Axles/springs/fuel tank etc.: black Side and rear wall: RAL 2011 deep orange Reinforced and certified structure in accordance with EN 12642 XL including load securing certificate. (Only in conjunction with 500mm high steel side walls). Rear stanchions screwed, hot-dip galvanized, without top coat. Lashing points LC 5,000 daN recessed at the front. Net hooks integrated at the side and rear in the bearings of the central locking system to the base side wall and 2 additional pieces on the front wall. BPW axles instead of GIANT tipping platform with permanently attached front wall in hot-dip galvanized design, with screwed, galvanized rear stanchions, without additional coating (not with HARDOX floor). Due to the system, the formation of waves during hot-dip galvanization, especially with the large floor panel, cannot be ruled out; complaints in this regard are excluded from the warranty. Tires 385/55R19.5 instead of 235/75R17.5 (floor and coupling height + approx. 110 mm, Code 08.940 ramp length 3,570 mm required). 1 plastic tool box, black, lockable, W=750xH=350xD=300mm (45kg payload with even load), arrangement: on the chassis frame on the right in the direction of travel. 1 pair of aluminum docking ramps without fairway (8 t/pair), 3,570x400x105mm, suitable for rubber-tired and tracked vehicles, 55 kg/each. Two-step access in front of the front wall, on the left in the direction of travel (hot-dip galvanized). Extended connecting lines for agricultural and forestry tractors. Further information New: No Celsvy Tvtoiqkh Dogt

Condition: new, overall weight: 18,000 kg, maximum load weight: 13,600 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 700 mm, * KA-TA-RT 18.0: * EBS (Electric Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * Air suspension with lifting and lowering system, RtR valve, and manual lowering for loading * Drawbar with force-locking height adjustment and 50 mm flange towing eye * Landing gear at the front * External folding supports at the rear * Plastic toolbox - approx. 750 x 350 x 300 mm, mounted on the right side * Plastic quarter fender * 15-pin 24 V and additional 13-pin 12 V power plug * Extended connecting cables for agricultural and forestry vehicles * 12/24 V LED taillights in the underrun protection * Steel pallet - 3-way tipping body made of fine-grain steel with high M-Strong side walls and reinforced 180 bar tipping cylinder * Fixed bulkhead made of smooth sheet metal * Hardwood support for excavator bucket bolted to the bulkhead * Continuous side walls - without center stanchion - foldable with side wall spring lifter and swinging via manual central locking * Bolted rear stanchions * Combination steel wing doors - rear wall with 2 asymmetrically divided wings - can be pivoted and locked by 270°, not foldable - and with additional swinging frames for the automatic locking system. Rear wall opening during tipping, locking via galvanized espagnolette lock and central locking, deactivation function for automatic rear wall opening when tipping backwards with the wing door open * 1 x 7 ton lashing ring in each corner and 4 x 3 ton lashing eyes on each side embedded in the outer frame * 4 mm sheet steel floor * Access platform screwed to the right in the direction of travel with a grab handle on the front wall * Rear mounting rail for the landing ramps * Mounting shaft for landing ramps embedded in the rear of the chassis * 1 pair of aluminum landing ramps (10 ton / pair), approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles * --Load securing certificate according to EN 12642 XL? * Chassis, drawbar, rear stanchions, bulkhead, tipping bed, underride protection, rear folding supports hot-dip galvanized Celiqevin Ucekh Dsgt * Side walls - cathodic dip coating - and tailgate painted in RAL 9010 pure white * Side walls can be painted in a RAL color for an additional charge * Axles, air tank, flanged towing eye, front landing gear painted in black * --Ex-Müller-Mitteltal trade fair trailer, without registration and tire pressure monitoring system, with slight signs of wear. * COC documents created in June 2024.-- * Errors and prior sale subject to change * Available for immediate delivery from Egestorf on the A7

Condition: used, overall weight: 18,000 kg, maximum load weight: 13,500 kg, axle configuration: 2 axles, loading space volume: 11 m³, loading space length: 5,000 mm, loading space width: 2,380 mm, loading space height: 900 mm, first registration: 03/2019, next inspection (TÜV): 07/2025, total width: 2,550 mm, total height: 2,650 mm, Equipment: ABS, 3-sided tipper body, 5 pairs of lashing eyes recessed in the floor, roller tarpaulin, towing eye 50 mm, ABS, EBS, GIGANT axle(s), drum brake system, air suspension, Jost support winch, vehicle can be fitted with advertising and/or lettering Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. We would be pleased to make you a financing or leasing offer for this object. Celiqkhou Uallj Dsgt Please contact us!

Condition: new, overall weight: 11,900 kg, maximum load weight: 8,750 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2025, Equipment: ABS, tail-lift, Inquiry number: 22004 * NEW VEHICLE available end of April 2025. * Delivery to your address possible! Müller Mitteltal KA-TA-R 11.9/024 Tandem Low Loader Three-Way Tipping Trailer with Ramps * Tires 385/55 R19.5 (4-wheel), BPW axles, parabolic springs, drum brakes * Gross vehicle weight: 11,900 kg, payload 8,750 kg. * Tire pressure monitoring with display option in the truck via EBS signal, * EBS instead of ABS, 24 volts * Side marker lights with turn signal control * LED lighting system for 12+24 volts instead of standard, with 1x15-pin connection cable, * Galvanized floor, 5m x 2.42m x 0.5m, laser-welded, pivoting, foldable, and removable side walls, prepared for later retrofitting of side wall extensions * Lockable compartment under the tipping body for a loading ramp * Includes aluminum ramps with an 8t load capacity, 3.57m long, in the ramp shaft under the tipping body * Hot-dip galvanized front wall * 4 UVV-compliant lashing rings, LC 5000daN, front and rear + 8 lashing eyes, LC 3000daN, recessed and foldable in the tipper floor (centered) * Drawbar continuously height-adjustable Hot-dip galvanized, 40mm towing eye * Net hook * Bolted, galvanized rear stanchions * Plastic toolbox on the right-hand chassis frame * Access in front of the bulkhead---- * We are a Müller-Mitteltal trading partner---- * Request a quote from us! * e.g., €525 net for 60 months with no down payment and no residual value. Offer from our financing partner FM LeasingPartner Cgsliqkhsv Ndmbs Det ----Our opening hours Mondays - Thursdays: 8:00 a.m. - 5:00 p.m. Fridays: 8:00 a.m. - 3:00 p.m. Outside of opening hours, we are available by appointment. We speak German, English, Polish, French, WhatsApp Leasing, financing, trade-in possible----

Condition: used, overall weight: 10,500 kg, empty load weight: 2,910 kg, maximum load weight: 7,590 kg, axle configuration: 2 axles, loading space length: 4,500 mm, loading space width: 2,200 mm, loading space height: 450 mm, first registration: 09/2009, next inspection (TÜV): 04/2025, suspension: steel, tire size: 235/75R17.5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel body, 2 axles, BPW axles, tandem, leaf spring suspension, ABS (anti-lock braking system), lashing eyes, underbody protection, front support, rear support, swing flaps. Coliqjv S H Sfskh Degt Construction: Tandem 3-way tipping trailer with ramp shaft. Loading ramps available for an additional charge of €900.00 net! ACCESSORIES INFORMATION IS PROVIDED WITHOUT GUARANTEE. Subject to changes, prior sale, and errors! - .

Condition: used, overall weight: 10,500 kg, maximum load weight: 7,550 kg, axle configuration: 2 axles, loading space length: 4,460 mm, loading space width: 2,200 mm, loading space height: 1,100 mm, first registration: 08/1998, next inspection (TÜV): 08/2025, total width: 2,400 mm, Vehicle number: 24542 Vehicle / Body: Tipper First registration: 08/98 HU: 08/25 Total weight: 10.500kg Unladen weight: 2,950kg Payload: 7,550kg Overall length: 6,500mm Cgsliqkjvi D Swjh Dot Loading length: approx. 4,460mm Width: 2,400mm Loading height: approx. 1,100mm Further information - Parabolic suspension - Side walls 600mm, foldable/removable - Loading width approx. 2,200mm - LED reversing light - Dropside lifting aid - BPW axles - Wheel chocks - 4 lashing eyes in loading area - Folding rear support Optional aluminum ramps ¤ 1,280.00/net Vehicle may have advertising stickers, lettering and/or lettering residue.

Condition: new, overall weight: 11,900 kg, maximum load weight: 8,600 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2025, * KA-TA-R 11.9 Masterline: * Hot-dip galvanized floor and bulkhead * Wabco EBS * Emergency release device for spring-loaded cylinders * RDÜ tire pressure monitoring system * Drum brakes * 2 x 5.5 ton BPW axles * Parabolic springs with tandem compensating unit * 300 mm height-adjustable hot-dip galvanized drawbar with 40 mm flange drawbar eye * Jost mechanical landing gear at the front * 2 mechanical hot-dip galvanized folding supports at the rear * Toolbox made of galvanized sheet steel on the right side * 15-pin power connector * Bolted underrun protection * LED lighting * Plastic quarter fenders * Net hooks on the sides and rear in the central locking bearings, as well as 3 on the outside of the bulkhead * Hot-dip galvanized chassis * Steel pallet 3-way tipping body * Continuous side walls without center stanchion, foldable with side wall spring lift * Tailgate folds down and swings via manual central locking * Hot-dip galvanized bolted rear stanchion * 1 x 5-ton recessed and foldable lashing ring in each corner, and 4 x 3-ton lashing rings on each side. Lashing rings recessed into the outer frame and foldable * 4 mm sheet steel floor * Rear mounting rail for landing ramps * Reinforced body with load securing certificate according to EN 12642 XL * 1 pair of aluminum landing ramps approx. 3,310 x 400 mm (load capacity 8 tons per pair) suitable for rubber-tired and tracked vehicles * Rear-locking storage compartment recessed into the chassis under the loading area * Tires 235/75 R 17.5 * Axles, springs, air chamber, drawbar, and landing gear painted in a black tone * Side walls painted in RAL 9010 pure white * Side walls can be painted in a RAL color for an additional charge * New vehicle with manufacturer's warranty * Errors and prior sale subject to change * Available from week 15/2025 Cgsliqev Dz N Ajkh Det * Sample images

Condition: new, overall weight: 19,000 kg, maximum load weight: 14,750 kg, axle configuration: 2 axles, loading space length: 4,995 mm, loading space width: 2,380 mm, loading space height: 900 mm, Year of construction: 2025, Equipment: ABS, * Müller Mitteltal KaTaR 19 Tandem - three-way tipping trailer, aluminum side walls and roll-up tarpaulin * NEW VEHICLE without first registration, available at the beginning of May 2025 Cslievudfzjqkh Dogt Number for inquiries: 18530B * can also be ordered from us in your RAL color and equipment * the chassis can also be painted in your desired color or galvanized for an additional charge * Please request a quote from us!---- * GG: 19t, NL: 14.75t * EBS * Structure aluminum side walls asymmetrical, continuously 900mm high * Front and rear wall 900mm high made of steel * 4,995mm x 2,380mm x 900mm in RAL 9016 traffic white * 2 spring jacks for side walls * 4 pairs of lashing eyes recessed in the 5mm thick steel floor and foldable LC 3000 daN * 2 x 9t SAF axles with disc brakes * 1t support load, with correspondingly increased payload * Air suspension 385/65R 22.5 with tire pressure monitoring * Underrun protection foldable and galvanized for paver loading * Drawbar with 50mm eyelet adjustable +77mm/ +33mm * LED lighting with flashing side marker lights * Front support leg with winch * 2 LED reversing lights * Front wall platform made of grating with access step and handles on the front wall * Roll-up tarpaulin for the tipper on the right in the direction of travel * ---- * Hire purchase example from our cooperation partner FM LeasingPartner 665 euros net for 60 months with no down payment and no residual value. Other terms with / without down payment / residual value possible ----* Our opening hours * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 * Outside of opening hours we are available by appointment * we speak German, we speak English, ????? ?? ????? ?????, mowimy po polsku, on parle francais * Leasing, financing, trade-in possible

Condition: used, overall weight: 14,400 kg, empty load weight: 3,650 kg, maximum load weight: 10,750 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,430 mm, loading space height: 900 mm, first registration: 07/2011, next inspection (TÜV): 08/2024, suspension: air, tire size: 285/70R19.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, tandem, air-suspended, ABS (anti-lock braking system), flap, lashing eyes, U-protection, front support, rear support, pendulum flaps, height-adjustable drawbar Csliqoth Uavjkh Djgt Body: Tandem 3-sided tipper trailer with aluminum drop sides 2x Gigant axles, drum brakes! Drive-on ramps available for an extra charge of 990.00€ net! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, overall weight: 18,000 kg, maximum load weight: 13,060 kg, axle configuration: 2 axles, loading space length: 4,800 mm, loading space width: 2,300 mm, loading space height: 1,400 mm, first registration: 02/1990, next inspection (TÜV): 03/2025, total width: 2,500 mm, Vehicle number: 24554 Vehicle / Body: Tipper Csliqjviqm Uskh Degt First registration: 07/90 HU: 03/25 Total weight: 18.000kg Unladen weight: 4,940kg Payload: 13,060kg Overall length: 7,150mm Loading length: approx. 4,800mm Width: 2,500mm Loading height: approx. 1,400mm Further information - Parabolic suspension - Steel drop sides approx. 900mm, foldable, split in the middle - Loading width approx. 2,300mm - LED reversing lights - SAF axles - 385/65 R22.5 tires

Condition: new, overall weight: 14,400 kg, maximum load weight: 10,870 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Equipment: ABS, * KA-TA-R 14.4: * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7-ton Gigant axles * Parabolic springs with tandem compensating unit * 300 mm height-adjustable drawbar with 40 mm flange drawbar eye * Jost mechanical landing gear at the front * 2 mechanical landing gears at the rear Folding supports * Plastic toolbox approx. 650 x 350 x 320 mm, front right side of the chassis * 15-pin power connector * Multi-chamber tail lights * Screwed underride protection * Plastic quarter fenders * Net hooks in each of the central locking bearings and two on the front wall * Fine-grain steel chassis * Steel pallet, 3-way tipping body, continuous side walls with inner tube reinforcement - without center stanchions, foldable with side wall spring lifter * Screwed rear stanchions * Combination steel wing doors - rear wall with 2 asymmetrically divided wings - pivots and locks 270° - not foldable - and with additional pendulum frames for automatic rear wall opening during tipping, locking via galvanized espagnolette lock at the rear and central locking, deactivation function for automatic Rear wall function when tipping backwards with the hinged door open Cgoliqkhsl Th Htj Det * 1 x 5 ton lashing ring in each corner and 4 x 3 ton lashing rings on each side. Lashing eyes embedded in the outer frame * 4 mm sheet metal floor made of fine-grain steel * Rear mounting rail for the landing ramps * Reinforced body with load securing certificate * 1 pair of aluminum landing ramps approx. 3,570 x 410 mm (load capacity 10 tons per pair) suitable for rubber-tired and tracked vehicles * Rear-locking storage compartment below the loading area embedded in the chassis for the ramps * Chassis, drawbar, underrun protection, rear stanchion, rear folding supports hot-dip galvanized * Axles, springs, air tank, and landing gear painted in a black tone * Tires 285/70 19.5 * Side walls painted in RAL 9010 pure white * Side walls painted in a RAL color available for an additional charge * New vehicle with manufacturer's warranty * Errors and prior sale subject to change * Available for immediate delivery from Egestorf

Condition: new, overall weight: 14,400 kg, maximum load weight: 11,050 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2025, Equipment: ABS, tail-lift, * Müller?Mitteltal KA-TA-R 14.4 tandem low loader three-way tipping trailer with ramps NEW VEHICLE * immediately available in RAL 9016 traffic white, * leasing, financing, trade-in of your old trailer possible ---- * No. for inquiries 114 * RDÜ with display option in the truck via EBS signal * Side marker lights with indicator control * EBS 2S/2M braking system * GG: 14,400 kg, payload 11,050 kg. * Galvanized floor 5m x 2.42m x 0.5m, laser-welded side walls, swingable, foldable and removable, preparation for later retrofitting of side wall extensions * Lockable compartment under the tipping bridge for loading ramp * 1 pair of aluminum ramps 8t / pair, 3.57m, included * Chassis hot-dip galvanized, front wall hot-dip galvanized * 4 UVV lashing rings LC 5000daN front and rear + 8 lashing eyes LC 3000daN recessed in the tipper floor and foldable (centered) * Excavator bucket shelf made of hardwood * 2-step access in front of the front wall (hot-dip galvanized) * Drawbar continuously height-adjustable, hot-dip galvanized, drawbar eye 40mm * Wide tires 385/55R 19.5 (4-way), Parabolic springs * Net hooks, rear stanchions screwed on, hot-dip galvanized * Extension ropes for the rear side wall * Plastic toolbox on the chassis frame on the right * LED lighting system 12 + 24 volts * 2 LED reversing lights on the rear of the trailer,---- * Hire purchase price: Cjliqevy N U Sekh Dogt * e.g. 559¤ for 60 months with no down payment and no residual value. An offer from our financing partner "FM LeasingPartner" Other terms with/without residual value or down payment possible * Request an offer from us! * We are Müller-Mitteltal trading partners ----Our opening hours Mondays - Thursdays: 08:00 - 17:00 Fridays 08:00 - 15:00 Outside of opening hours we are available by appointment We speak German, we speak English, mowimy po polsku, on parle francais, Whatsapp / Facetime

Condition: new, overall weight: 11,900 kg, maximum load weight: 8,650 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2025, * KA-TA-R 11.9 Masterline * Wabco EBS * RDÜ Tire Pressure Monitoring System * Multi-voltage * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 5.5 ton BPW axles * Parabolic springs with tandem compensating unit * 300 mm height-adjustable drawbar with 40 mm flange drawbar eye * Mechanical landing gear at the front Cjlieq Euagoqkh Degt * 2 mechanical landing gears at the rear Folding supports * Plastic toolbox on the right side * 15-pin power connector * 12 V 13-pin auxiliary cable * Extended connection cable for forestry and agricultural tractors * 2-step step facing the direction of travel, front left * LED taillights * Screw-on underride protection * Plastic quarter fenders * Net hooks on the sides and rear in the central locking bearings, and two on the bulkhead * Steel pallet 3-way tipping body (continuous side walls - without center stanchions - foldable with side wall spring lift, tailgate foldable and swinging via manual central locking * 1 x 5 ton lashing ring in each corner and 4 x 3 ton lashing eyes on each side embedded in the outer frame * 4 mm sheet steel floor * Rear mounting rail for the landing ramps) * Reinforced body with load securing certificate according to EN 12642 XL * 1 pair of aluminum landing ramps Approx. 3,310 x 400 mm (load capacity 8 tons per pair) suitable for rubber-tired and tracked vehicles * Rear-locking storage compartment embedded in the chassis below the loading area * Chassis, drawbar, tipping body, front wall, side walls, folding supports, and rear stanchions hot-dip galvanized axles * Springs, air chamber, flanged towing eye, and landing gear painted in a single black tone * Tires 285/55 R 19.5 * New vehicle with manufacturer's warranty * Side walls hot-dip galvanized * Errors and prior sale subject to change * Available for immediate delivery from Egestorf * Sample images

Condition: new, overall weight: 14,400 kg, maximum load weight: 10,400 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2024, * ETK-TA-R 14.4: * EBS * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7-ton Gigant axles * Parabolic springs with tandem compensating unit * Tire pressure monitoring with display option in the truck via EBS signal without truck-side installation * 300 mm height-adjustable drawbar with 40 mm flange drawbar eye * Mechanical landing gear at the front * 2 mechanical landing gears at the rear Folding supports * Plastic toolbox approx. 750 x 350 x 300 mm on the right side * 15-pin power connector * Multi-chamber tail lights * Bolted underride protection * Plastic quarter fenders * Net hooks on the sides and rear in the central locking bearings, as well as two on the bulkhead * Main frame made of fine-grain steel * Steel pallet 2-way tipping body, fixed bulkhead made of smooth sheet metal, continuous side walls (without center stanchions), foldable with side wall spring lifters, and swinging via manual central locking * Bolted rear stanchions * Steel rear wall inserted in front of the ramps * 1 x 5 ton lashing ring in each corner and 4 x 3 ton lashing eyes on each side embedded in the outer frame * 4 mm floor made of fine-grain steel * Two-part mechanical Grating loading ramps with aluminum spigots, 2,150 + 1,300 mm x 600 mm (manually collapsible up to 80 mm) * Chassis, drawbar, rear stanchions, underrun protection, mechanical drop legs, and loading ramps hot-dip galvanized * Axles, springs, air chamber, flanged drawbar eye, and landing gear painted in a black tone * Side walls and bridge in RAL 9010 pure white Colistr St Ujqkh Degt * Painting of the side walls and tipping bridge in a RAL color is available for an additional charge * New vehicle with manufacturer's warranty * Errors and prior sale subject to change * Available for immediate delivery from Egestorf on the A7

Condition: new, overall weight: 11,900 kg, maximum load weight: 8,620 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2024, * KA-TA-R 11.9: * 5.5-meter-long bridge completely finished in RAL 9010 white * Tire pressure monitoring (RDÜ) * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 5.5-ton Gigant axles * Parabolic springs with tandem compensating unit * 300 mm height-adjustable, hot-dip galvanized drawbar with 40 mm flange drawbar eye * Jost mechanical landing gear at the front * 2 mechanical landing gears at the rear Hot-dip galvanized folding supports * Toolbox made of galvanized sheet steel on the right side * 15-pin power connector * LED taillights * Hot-dip galvanized bolted underride protection * Toolbox made of galvanized sheet steel on the right side * Plastic quarter fenders * Net hooks on the sides and rear in the central locking bearings, as well as 3 on the front wall * Hot-dip galvanized chassis * Steel pallet, 3-way tipping body * Continuous side walls without center stanchions, foldable with side wall spring lift * Tailgate foldable and swinging via manual central locking * Hot-dip galvanized bolted rear stanchions * 1 x 5 ton lashing ring in each corner and 4 x 3 ton lashing rings on each side Lashing eyes embedded in the outer frame * 4 mm sheet steel floor Cgeliqkol Thx Ejh Dot * Rear mounting rail for the docking ramps * Preparation for later retrofitting of side wall extensions * Reinforced body with load securing certificate according to EN 12642 XL * 1 pair of aluminum docking ramps approx. 3,310 x 400 mm (load capacity 8 tons per pair) suitable for rubber-tired and tracked vehicles * Rear-locking storage compartment embedded in the chassis below the loading area * Axles, springs, air tank, drawbar, and landing gear painted in a black tone * Body color: RAL 9010 pure white * Side walls and tipping body painted in a RAL color available for an additional charge * Tires: 235/75R17.5 * Wheelbase: 990 mm * New vehicle, not registered, with manufacturer's warranty * Errors and prior sale subject to change * Available immediately Egestorf on the A7

Condition: new, overall weight: 11,900 kg, maximum load weight: 8,850 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2024, * KA-TA-R 11.9 "Masterline": * Hot-dip galvanized floor and bulkhead Cjlel Thyxeiqkh Dogt * EBS braking system * Emergency release device for spring-loaded cylinders * Tire pressure monitoring system * Drum brakes * 2 x 5.5 ton BPW axles * Parabolic springs with tandem compensating unit * 300 mm height-adjustable drawbar with 40 mm flange drawbar eye * Jost mechanical landing gear at the front * 2 mechanical landing gears at the rear Hot-dip galvanized folding supports * Plastic toolbox approx. 750 x 350 x 300 mm on the right side * 15-pin power connector * LED lighting * Bolted underride protection * Plastic quarter fender * Net hooks on the sides and rear in the central locking bearings, as well as two on the front wall * Steel pallet 3-way tipping body (continuous side walls - without center stanchions - foldable with side wall spring lifter) * Bolted rear stanchions * Combination steel wing doors, rear wall with two asymmetrical wings, divided by 270°, pivoting and locking, not foldable, and with additional pendulum frames for automatic rear wall opening during tipping. Locking via galvanized espagnolette and central locking * Deactivation function for automatic rear wall function when tipping backwards with the wing door open * 1 x 5 ton lashing ring in each corner and on the sides 4 x 3-ton lashing eyes embedded in the outer frame, 4 mm sheet steel floor, rear mounting rail for the landing ramps * Reinforced body with load securing certificate according to EN 12642 XL * 1 pair of aluminum landing ramps approx. 3,310 x 400 mm (load capacity 8 tons per pair) suitable for rubber-tired and tracked vehicles * Rear-lockable storage compartment embedded in the chassis below the loading area * Front wall, tipping platform, rear stanchions, underrun protection, mechanical Hot-dip galvanized drop legs * Side walls and tailgate painted in RAL 9010 pure white * Side walls can be painted in a RAL color for an additional charge * Axles, springs, flanged towing eye, air chamber, and landing gear painted in a black color * New vehicle, not registered, with manufacturer's warranty * Errors and prior sale subject to change * Available for immediate delivery from Egestorf on the A7

Condition: new, overall weight: 14,400 kg, maximum load weight: 10,800 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2023, Equipment: ABS, * KA-TA-R 14.4: * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes Cgsliqkhjl Th Als Det * 2 x 7-ton Gigant axles * Parabolic springs with tandem compensating unit * 300 mm height-adjustable drawbar with 40 mm flange drawbar eye * Jost mechanical landing gear at the front * 2 mechanical landing gears at the rear Folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, front right side of chassis * 15-pin power connector * Multi-chamber tail lights * Screwed underride protection * Plastic quarter fenders * Net hooks in each of the central locking bearings and two on the front wall * Fine-grain steel chassis * Steel pallet, 3-way tipping body with reinforced Strong side walls (continuous side walls with inner tube reinforcement at the top - without center stanchions - foldable with side wall spring lifter) * Screwed rear stanchions * Combination steel wing doors - rear wall with two asymmetrically divided wings - pivotable and lockable by 270° - not foldable - as well as with additional pendulum frames for automatic rear wall opening during tipping, locking via galvanized espagnolette lock at the rear and central locking, deactivation function for automatic rear wall function during tipping Reverse tilting with the wing door open * 1 x 5 ton lashing ring in each corner and 4 x 3 ton lashing eyes on each side embedded in the outer frame * 4 mm sheet metal floor made of fine-grain steel * Rear mounting rail for the landing ramps * Reinforced body with load securing certificate * 1 pair of aluminum landing ramps approx. 3,570 x 410 mm (load capacity 10 tonnes). / pair) suitable for rubber-tired and tracked vehicles * Rear-locking storage compartment below the loading area embedded in the chassis for the ramps * Drawbar, underrun protection, rear stanchion, rear folding supports hot-dip galvanized * Axles, springs, air tank, and landing gear painted in a black tone * Tires 285/70 19.5 * Side walls painted in RAL 9010 pure white * Side walls painted in a RAL color available for an additional charge * New vehicle with manufacturer's warranty * Errors and prior sale subject to change * Available for immediate delivery from Egestorf

Condition: new, overall weight: 18,000 kg, maximum load weight: 13,430 kg, axle configuration: 2 axles, loading space volume: 11 m³, loading space length: 4,995 mm, loading space width: 2,380 mm, loading space height: 900 mm, Year of construction: 2024, * Wabco EBS-E (electric braking system with RSS) * Emergency release device for spring-loaded cylinders * Drum brakes * Tire pressure monitoring system with truck display option via EBS signal - no truck-side installation required * 2 x 9-ton Gigant axles * Air suspension with level control during tipping * Drawbar with 50 mm flanged drawbar eye (adjustable by +77 mm and -33 mm via offset plate) * Jost front landing gear * Foldable galvanized steel underrun protection for paver loading * Closed Single plastic fenders * 15-pin power connector * LED taillights with galvanized canopy * Fine-grain steel chassis * Steel 3-way tipping body (side walls with MM profile - continuous without center stanchion - swinging via manual central locking and foldable with side wall spring lift) * Rear wall - made of HBW 400 steel - swinging via automatic 2-claw lock * 5 mm sheet steel floor made of HBW 450 steel Cgjliqkhev H Ihqj Dot * 4 x 3-ton lashing eyes on each side, recessed and foldable - embedded in the steel floor * Reinforced and certified body according to EN 12642 XL including load securing certificate up to 19 tons * Tipping body and side walls in RAL 9010 pure white * Side walls painted in RAL 9010 pure white * Side walls painted in a RAL color available for an additional charge * Chassis painted in RAL 9011 graphite black * New vehicle with full manufacturer's warranty * Errors and prior sale subject to change * Available immediately from Egestorf

Condition: new, overall weight: 14,400 kg, maximum load weight: 10,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2025, * Wabco EBS * RDÜ Tire Pressure Monitoring System * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7-ton Gigant axles * Parabolic springs with tandem compensating unit * 300 mm height-adjustable hot-dip galvanized drawbar with 40 mm flange drawbar eye * Jost mechanical landing gear at the front * 2 mechanical hot-dip galvanized folding supports at the rear * 15-pin power connector * LED taillights * Hot-dip galvanized bolted underride protection * Toolbox made of galvanized sheet steel on the right side * Plastic quarter fender * Hot-dip galvanized chassis * Steel pallet, 3-way tipping body * Continuous side walls with inner tube reinforcement at the top - without center stanchions - foldable with side wall spring jack Cjliev Dz N Noqkh Degt * Tailgate foldable and swinging via manual Central locking system * Hot-dip galvanized bolted rear stanchions * 1 x 5-ton lashing ring in each corner and 4 x 3-ton lashing rings on each side. Lashing eyes embedded in the outer frame * 4 mm sheet metal floor made of fine-grain steel * Net hooks, rear mounting rail for the landing ramps * Preparation for later retrofitting of side wall extensions * Reinforced body with load securing certificate according to EN 12642 XL * 2-step step on the left side as a climbing aid * 1 pair of aluminum landing ramps approx. 3,570 x 400 mm (load capacity 8 tons per pair) suitable for rubber-tired and tracked vehicles * Rear-locking storage compartment embedded in the chassis below the loading area * Axles, springs, air tanks, and landing gear painted in a black tone * Chassis, drawbar, floor, front wall, and folding bags are hot-dip galvanized * New vehicle without first registration and with manufacturer's warranty * Tires 385/55 R 22.5 * Side walls painted in RAL 9010 Pure White * Painting of the side panels in a RAL color is available for an additional charge. * Errors and prior sale subject to change. * Available for immediate delivery from Egestorf.

Condition: new, overall weight: 21,000 kg, maximum load weight: 16,500 kg, axle configuration: 2 axles, loading space length: 4,995 mm, loading space width: 2,380 mm, loading space height: 1,000 mm, * KA-TA-R 21.0: * Chassis in black (not galvanized) * 2 axle tandem agricultural * Steel 3 side tipper. with Bordmatik * EBS (electrical braking system with RSS) * RDÜ tire control monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * Gigant axles * Air suspension with level control during tipping * Starting aid for maneuvering purposes on the 1st axle (switched via EBS) * Support winch at the front * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * 13-pin 12V power plug * Drawbar with ball head coupling K80 (adjustable mm coupling height approx. 440 - 550 mm loaded) with raised gallows for connecting cables * Bolted steel underrun protection * Plastic quarter fenders in front of the first and after the last axle Cgeliqkhsv D Tb Ds Det * Chassis made of fine-grain steel * Steel 3-side tipping structure, fixed front wall, continuous side walls - without center stanchions -, right side wall swings via central locking and folds down with Side wall spring lift, left side wall foldable with side wall hydromatics, tailgate swings via automatic hook lock * 5mm sheet steel floor made of HARDOX-450 steel or equivalent * 4 x 3 ton UVV lashing rings embedded in the outer frame on each side, * Support load 3 ton * Tires 600/55/R22.5 * New vehicle with manufacturer's warranty * Errors and prior sale subject to change * Delivery time on request