Condition: used, CE marking: yes Kedjxdlrkspfx Ahzenf Serial number: TBA

Condition: used, machine/vehicle number: YV2ASW0C88A65xxxx, mileage: 652,000 km, Year of construction: 2008, Please provide reference number upon request: 20301 Specifications: Knodpfx Ajwfwnvshzef Km: Approx. 652,000 Transmission: Automatic Air suspension Engine brake JOAB on construction 20T hook Trailer hitch VBG Euro 4 Tires (see pictures) Hydraulic underrun barrier Grill Extra light Rotor beam 2 years Radio/CD Air conditioning/AC Maintenance done by owner Ready for delivery Description:Volvo FH480 Hook truck from 2008.The truck is EU approved and ready for delivery.Sold without box. Km: 652000 HK: 480 Technical approved: Yes EU-approved until: 24.03.2026 Own weight: 12960 Total Weight: 27000 Payload: 13965 Width: 255 Length: 880 Euro: 4 Model: FH480 Krokbil Gearbox: Automatic = More information = Please contact ATS Norway for more information

Year of construction: 2022, condition: used, Brand new long reach package to fit Caterpillar CAT 325D / CAT 330GC - 18.5M long Comes with: - 1x heavy duty boom - 1x heavy duty arm - Hydraulic lines for arm cylinder - Hydraulic lines for bucket cylinder - 1x linkage set with pins - 1x 0.65M³ heavy duty bucket - Supplied without boom and arm cylinders Knodpfx Asvg Dyishzsf = More information = New: Yes CE marking: yes Serial number:

Condition: used, machine/vehicle number: YV2RT60FXKA84xxxx, mileage: 5,874 km, Year of construction: 2021, Please provide reference number upon request: 20511 Specifications: - 2021 model - 5874 km (will increase slightly) - Eu-approved until: 21.02.26 - Euro 6 engine - 8x2 - 551 Hp - Suspension on 1st and 2nd axle: Steel - Suspension on 3rd and 4th axle: air - 2 x 110 liter variable pumps - 2 x manual extensions for main boom and 2 x for jib - Scanreco optical remote control (Top model) - Weight cell main boom - Extra function for main boom and jib - Auto leveling (The car puts itself in a level position ready for lifting.) - Virtual room (Possibility to limit all axes with a few keystrokes, no need to go to a workshop for this. Brilliant when working under high voltage etc.) - SKF central lubrication of the crown and up to the first joint - Extra function fully extended on jib - Single winch hook (Jib / main boom) - 2-part winch hook (Jib / main boom) - 4-part winch hook (Main boom) - Hook for jib - Hook for main boom (Large hook) - Emergency lowering unit (24 volts) - Wire stop sensor and sleeve - 4 ton winch - Diagnostic cable for online help (Remote help) - Danfoss valve center - 2 x 2 ton counterweight (Must only be used for cranes above the cabin otherwise the counterweights are not needed, and these can be removed as needed) - Front support leg Construction: Kjdjwlm Dtepfx Ahzsnf - 4 x work lights strategically placed inside each support leg cabinet. - 50" LED bar work light rearward on the cabin - Powerful LED lamps in the crane. - VBG mount, with air servo control unit mounted in the rear cabinet left side. - Bracket on the roof - 2 pcs high beam LED bar on the roof forward (daylight!!). - Orange work warning LED beam on the roof. - EasyUp foldable ladder in the side with railing. - Boxes for chain, chainsaw etc. Mounted on the rear support leg so that these are driven out together with the support leg and are at the same time packed away while driving. - Charger for control in the cabin - Plastic internal screens axle 3 and 4. - 3 edge pull-out cabinet between axle 3 and 4 - On the left side between axle 2 and 3 there is a large cabinet with 500 W fan heater installed to hang clothes to dry etc. - Plane / bottom at the rear closed with alloxed aluminum floor plates that are cut to fit the car perfectly, with rounded edges for a very professional send. - CNC manufactured plates up the rear edge of the cabin. - Fully painted sides, cabin and stern. - Resting cradle for crane for driving without jib. - 5 support leg plates. 4 pcs 80x80x6 cm. placed in dedicated cradles at the rear on the "level" - Right side large cabinet 1.2 x 1 meter - Powerful LED back / work lights at the rear. - Rear part of the car rebuilt with CNC manufactured plates, and beautiful LED taillights have been installed in several stages. - Hatches strategically placed for access to relevant devices under the bodywork. - Precisely cut out fields in the side coverage for access to the screen, manual controls, emergency lowering functions etc. - Marker lights along the side mounted so that they flash together with the turn signals / direction indicators - Cradle to hold the jib when not in use. - Hydraulic extra function dismantled main boom and jib, but mounted if desired. - Kettle in cabin - Microwave oven in cabin - Light...

Year of construction: 2024, condition: used, Features: Ksdpfsvg A Tbjx Ahzjnf Multi-Shank Parallelogram style Ripper 1 cylinder Ripper designed to accept OEM style parts (Including Cylinder and Seal Kits) Paint is yellow Ripper ships assembled complete with mounting bolts Complete Ripper Set Including: Ripper Structure Five Ripper Shanks with Five Tips 1 Cylinder Cylinder Hoses Mounting Bolts Shipping Specs Length: 1.75 m Width: 2.28 m Height: 1.2m Weight: 1.2 ton = Further information = New: Yes Serial number: 00030704

Condition: used, machine/vehicle number: YS2S6X2000215xxxx, mileage: 695,038 km, Year of construction: 2018, Please provide reference number upon request: 22092 Car specifications: 2018 model Mileage: 695,038 (will check a little) EU approved until: 30.11.26 Euro 6 6x2 650 hp Tires (see pictures) Automatic transmission L ft on 3 axles Full side opening opening on car: 2.94 cm Internal length in cabinet: 6.886 m Internal width in cabinet: 2.496 m Internal height in cabinet: 2,900 m Heating in cabinets 3 rows of lashing rails Brake pads: see picture Clutch plate: 100% Retarder Spring: full air Refrigerator Webasto new Particle filter changed Brake pads on drive shaft changed Clutch replaced 70,000 km ago Air conditioning/ac Radio Light Videos Delivery by appointment   Specifications cabinet beds: 2018 model EU approved until: 10.11.26 4 axles Tires (see pictures) hanger opening: 2.94 cm 3 rows of lashing rails Heating in cupboard (unknown condition) Full side opening Delivery by appointment   Description: We have a 2018 Scania S650 6x2 box truck w/ 2018 spoke 4 axle box trailer w/ full side opening for sale. The car is being sold as a set and everything works as it should according to the owner. What needs to be done is the heating in the cupboard. This has not been used by the owner and is in an unknown condition. So errors and omissions may occur and some cost must be taken into account. Ksdpjx Ncbvsfx Ahzsnf The car is in weekly operation so the mileage will increase slightly. Delivery by appointment Km: 695038 HK: 649 Technical approved: Yes EU-approved until: 30.11.2026 Own weight: 13500 Euro: 6 Model: S650 6x2 skapbil m/ 2018 ekeri 4 akslet skaphenger m/ full sideåpning se video Gearbox: Automatic = More information = Please contact ATS Norway for more information

Condition: new, Year of construction: 2024, = Further options and accessories = - Spare wheel = Notes = MEASURES & DIMENSIONS Gross Vehicle Weight (kg) : 70,000 Loading Platform Length (mm) : 10,500 Weight of Axle Group (kg) : 48,000 Total Length (mm) : 14,900 Kingpin Capacity (kg) : 22,000 Total Width (mm) : 3,000 Curb Weight (kg) : 13,440 Loading Platform Height (mm) : 1,350 Pay Load (kg) : 60,000 Height of 5.th Wheel (mm) : 1,400 CONSTRUCTIONS Base chassis Heavy duty and extra durability designed I type chassis All welded S355 steel chassis. Outer frame is UPE 240 profile. Welding (Chassis) : Automatic ARC submerged. Welding (Superstructure): Automatic robot welding. Axle (Type): Özgül Turkish Brand Drum brakes 3 x 16 Ton axles Suspension (Type): Mechanical leaf spring suspension / 12-14 lines King pin (Type) : 1 position with 1x coupling-pen 2” (EU approved) Çayırova Brand. + 3.5 inches Tires: 12+1 Units, 12 R 22.5 Available brand in stock Rims: 12+1 units, 9.00 x 22.5 steel rims. Jantas or Ako Brand. Landing Gear: Mechanically operated by one side, two speed. Gos Brand. Brake System: Two line air brake system acting on all wheels Brake chamber 1 axles with 2 units emergency brake chambers. 2 axle with 4 unit service brake chambers. Electric system 24V, 2x7 + 1x15 pin sockets, according to SAE standard with ADR Adaptation SABA brand. • 2 x Rear Stop Lights. - 4 x side lights. • 2 x White Lights - 2 x Front Lights • 2 x Registration Plate Lights - 2 x rotating Lights Floor Middle of platform and on the axles complete checked sugar plate 6/7 mm steel,edges of the axles are wood and steel ,From the gooseneck end to 1.axles finishing area edges are 900 mm width,70 mm height hard wood. Rear loading ramps Hydraulic operated rear ramps with Electro pump for rear ramps hydraulic function with cable push – button for remote r ramps length 2800 mm width 900 mm, covered all steel and 20x40 mm thickness steel bars. Color : Upon Request Paint Application Sand Blasting, Chemical cleaning, HYZINC covering, Epoxy covering and 2 coats of acrylic paint. TECHNICAL SPECIFICATIONS Accessories • 2 x 7 pcs of heavy duty lashing rings mounted on the outer frame mushroom type • 4 x Certificated Expray mud flaps. • 1 x Plastic water tank • 2 x Wheel chocks and holders • 2 x 7 Galvanized side extension brackets 250 mm + 250 mm • 2 x Side Protections steel • 1 x tool box. • 1 x spare wheel carrier with 1 tire (on the gooseneck) • 2 x manual support legs at the rear. • 2 x Reflective tape and reflector sign at the rear and sides. • 2 x side extension reflectors • 1 plaque places on bumper = Further information = Knedpfx Aexn S Erjhzof Curb weight: 13,440 kg

Condition: used, Year of construction: 2001, operating hours: 13,320 h, Please provide reference number upon request: 18892 Specifications: - 2001 model - Certified until 02.25 - Hours: Approx. 13,320 Ksdpfx Ahourr Inozjnf - Weight: 24,500 kg - 118 kW - Undercarriage (see pictures) - Belt width: 60 cm - KM quick release - Gjerstad Grave bucket - Extra light - Easy Dig Novatron - Radio/CD - Climate/AC - Services taken by owner - Videos are available - Ready for delivery Description: Komatsu PC290 Tracked excavator from 2001. The machine is sold with a quick-release attachment and digging bucket. Certified until 02.25. Video of hydr. Pump and motor are nearby. Hours: 13320 Own weight: 24500 Total Weight: 24500 Year controlled: Yes Year controlled until: 02.25 Kw: 118 Model: PC240LC-6K Beltegraver m/ Graveskuffe = More information = Serial number: K3xxxx Please contact ATS Norway for more information

Condition: new, Year of construction: 2024, = Further options and accessories = - Spare wheel = Notes = MEASURES & DIMENSIONS Gross Vehicle Weight (kg) : 70,000 Loading Platform Length (mm) : 10,500 Weight of Axle Group (kg) : 48,000 Total Length (mm) : 14,900 Kingpin Capacity (kg) : 22,000 Total Width (mm) : 3,000 Curb Weight (kg) : 13,440 Loading Platform Height (mm) : 1,350 Pay Load (kg) : 60,000 Height of 5.th Wheel (mm) : 1,400 CONSTRUCTIONS Base chassis Ksdpfx Ahexn S Efjzsnf Heavy duty and extra durability designed I type chassis All welded S355 steel chassis. Outer frame is UPE 240 profile. Welding (Chassis) : Automatic ARC submerged. Welding (Superstructure): Automatic robot welding. Axle (Type): Özgül Turkish Brand Drum brakes 3 x 16 Ton axles Suspension (Type): Mechanical leaf spring suspension / 12-14 lines King pin (Type) : 1 position with 1x coupling-pen 2” (EU approved) Çayırova Brand. + 3.5 inches Tires: 12+1 Units, 12 R 22.5 Available brand in stock Rims: 12+1 units, 9.00 x 22.5 steel rims. Jantas or Ako Brand. Landing Gear: Mechanically operated by one side, two speed. Gos Brand. Brake System: Two line air brake system acting on all wheels Brake chamber 1 axles with 2 units emergency brake chambers. 2 axle with 4 unit service brake chambers. Electric system 24V, 2x7 + 1x15 pin sockets, according to SAE standard with ADR Adaptation SABA brand. • 2 x Rear Stop Lights. - 4 x side lights. • 2 x White Lights - 2 x Front Lights • 2 x Registration Plate Lights - 2 x rotating Lights Floor Middle of platform and on the axles complete checked sugar plate 6/7 mm steel,edges of the axles are wood and steel ,From the gooseneck end to 1.axles finishing area edges are 900 mm width,70 mm height hard wood. Rear loading ramps Hydraulic operated rear ramps with Electro pump for rear ramps hydraulic function with cable push – button for remote r ramps length 2800 mm width 900 mm, covered all steel and 20x40 mm thickness steel bars. Color : Upon Request Paint Application Sand Blasting, Chemical cleaning, HYZINC covering, Epoxy covering and 2 coats of acrylic paint. TECHNICAL SPECIFICATIONS Accessories • 2 x 7 pcs of heavy duty lashing rings mounted on the outer frame mushroom type • 4 x Certificated Expray mud flaps. • 1 x Plastic water tank • 2 x Wheel chocks and holders • 2 x 7 Galvanized side extension brackets 250 mm + 250 mm • 2 x Side Protections steel • 1 x tool box. • 1 x spare wheel carrier with 1 tire (on the gooseneck) • 2 x manual support legs at the rear. • 2 x Reflective tape and reflector sign at the rear and sides. • 2 x side extension reflectors • 1 plaque places on bumper = Further information = Curb weight: 13,440 kg

Condition: used, Year of construction: 2012, Please provide reference number upon request: 22083 Specifications: Knsdpfsx Iztbjx Ahzjf Model year: 2012 Weight: 480 kg Width: 2 meters Ready for delivery Own weight: 480 Model: SS1200-Trima snøskuffe = More information = Field of application: Construction Serial number: E1xxxx Please contact ATS Norway for more information

Year of construction: 2025, condition: used, New: Yes CE marking: yes Knedpfx Ahow U T Rqozef Serial number: 1/4

Condition: used, Year of construction: 2018, Please provide reference number upon request: 22084 Specifications: Model year: 2018 Weight: 1,080 kg Capacity: 4,000 liters Knjdpfx Aex Izrqohzjf Width: 255 cm Ready for delivery Own weight: 1080 Model: BM L120 strøskuffe = More information = Field of application: Construction Serial number: 20xxxx Please contact ATS Norway for more information

Condition: used, power: 55 kW (74.78 HP), tire condition: 80 %, axle configuration: 4x4, Year of construction: 2022, operating hours: 1,124 h, Equipment: all wheel drive, = Additional Options and Accessories = - Rear view camera - Quick-attach coupler Kedsw Smi Uepfx Ahzenf = Remarks = Caterpillar 908M CE certified. Comes with forks and bucket EPA Tier 4 Immediately available. = Further Information = Tire tread: 80% Unladen weight: 6,460 kg CE marking: yes

Condition: used, Year of construction: 2003, operating hours: 4,399 h, Please provide reference number upon request: 20241 Specifications: - 2003 model - 4399 hours - Automatic transmission - 4x4 - 91kW - 7320 kg - Rotation on basket - ​​Remote control for basket - ​​Aggregate - Hydraulic support legs - 2007 Essverk Platform 912 - Tires (see pictures) - Serviced by owner. - Lights - Air conditioning - Heated mirrors - Ready for delivery   Knodpfx Ajxwklcjhzof Description: We have a 2003 Hydrema 912B w/2007 Essverk Platform 912 lift with rotation on basket and remote control for sale. It starts and runs according to the owner. Services have been performed by the owner. The lift is controlled by remote control. Errors and defects may occur so some additional costs must be expected. Ready for delivery. Hours: 4399 Own weight: 7320 Total Weight: 7320 Kw: 91 Model: 912B m/ 2007 Essverk Plattform 912 lift med rotasjon på korg og fjernkontroll = More information = Please contact ATS Norway for more information

Year of construction: 2017, condition: used, Please provide reference number upon request: 22089 Description: We have a 2017 Magsi Rateau wood gripper w/s70 mount for sale. Everything works as it should, according to the owner. Ready for delivery Model: Rateau wood griper m/s70 feste = More information = Knsdex I U Uropfx Ahzef Serial number: 17090xxxx Please contact ATS Norway for more information

Condition: used, Year of construction: 2004, operating hours: 12,270 h, Please provide reference number upon request: 17220 Specifications: 2004 model Hours: approx. 12,500 (will increase) Weight: 38,800 kg Undercarriage (see photos) Track width: 60 cm Knjdsuck Elopfx Ahzjf Digging bucket Mikrofyn GPS system (condition uncertain) Auxiliary hydraulics Additional lights Central lubrication Quick coupler Service performed by owner Ready for delivery Description:Volvo EC360 crawler excavator.The machine is sold with a digging bucket and GPS.The owner states that the machine is in working condition.Ready for delivery. Hours: 12270 Total Weight: 38800 = More information = Please contact ATS Norway for more information

Condition: used, Please provide reference number upon request: 20666 Specifications: Total width: 2.8 meters Volume: Approx. 5.8 m The most worn out oil was replaced 2 years ago Volvo mount Welded up about 6 months ago Ready for delivery Own weight: 11 Model: Høytipp skuffe til Hjullaster. 5,8m3. Knodpfxjwqbt Ts Ahzef = More information = Field of application: Construction Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YV2AP90DXBA71xxxx, mileage: 630,000 km, Year of construction: 2011, Please provide reference number upon request: 22082 Specifications: Model year: 2011 Mileage: approximately 630,000 km EU approved until 20.05.2026 Euro 5 Wheelbase: 490/136 cm 700 hp Retarder Air suspension Tandem Diesel heater Onspot Tires (see pictures) Galvanized aluminum body Clutch replaced Gearbox serviced and circuit board replaced Compressor horn Roof lights Tool box Automatic transmission AC/Climate control 2x beds Radio Delivery by agreement Description: 2011 Volvo FH16 with 700 horsepower. It has onspot functionality. Delivery by agreement. Km: 630000 HK: 700 Technical approved: Yes EU-approved until: 20.05.2026 Own weight: 11400 Total Weight: 29500 Payload: 18025 Knodpfx Ahex Izqyezjf Width: 255 Length: 937 Kw: 515 Euro: 5 Model: FH16 700 Gearbox: Automatic = More information = Please contact ATS Norway for more information

Year of construction: 2022, condition: used, Please provide reference number upon request: 22090 Description: We have a 2022 LLOYD RS8-14 sale drawer w/ s50-60 combi attachment for sale. Everything works as it should, according to the owner. Can be delivered around the corner. Knsdpfx Asx I U T Ishzof Own weight: 1 Model: RS8-14 soldeskuffe m/ s50-60 kombifeste = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: WMA21SZZ5DW17xxxx, mileage: 300,000 km, Year of construction: 2012, Please provide reference number upon request: 22086 Specifications: 2011 model EU-approved until: 30.11.25 Not EU-approved Mileage: approx. 300,000 km Faults and deficiencies 6x2 Euro 5 441 hp Automatic transmission Tires (see pictures) Machinery bed and tipping box available for an additional price 20T Hiab hook Air conditioning Lights Extra lights Radio Ready for delivery Description: We have a 2012 Man TGS 26.440 6x2 hook truck with a 20T Hiab hook that is not EU-approved for sale. The vehicle has faults and deficiencies, and some additional costs should be expected. A machinery bed and tipping box can be included for an additional price. Ready for delivery. Km: 300000 HK: 440 Technical approved: no EU-approved until: 30.11.2025 Own weight: 11150 Total Weight: 28000 Payload: 16775 Width: 255 Length: 844 Knedsx I U Tujpfx Ahzef Kw: 324 Euro: 5 Model: TGS 26.440 Gearbox: Automatic = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: YV2A4BAD4XA29xxxx, mileage: 1,244,000 km, Year of construction: 1999, Please provide reference number upon request: 21144 Specifications – Volvo FH16 (1999): Year: 1999 Mileage: approx. 1,263,000 km EU approved until: 30.11.2026 6x4 Kodpfx Asw Ruxuehzenf Wheelbase: 430 / 138 cm 520 hp Engine brake Suspension: parabolic Manual gearbox Tires (see photos) Equipment and Condition: Extra wiper heating Front tires are very worn Thermostat replaced Instrument cluster malfunction Fuel gauge not working Central lubrication Liftable axle All belts recently replaced in workshop Valve cover replaced by owner Rear flatbed replaced by owner 400-liter diesel tank Ready for delivery Briab grain trailer (1983): Year: 1983 EU approved until: 19.06.2026 3 axles Length: 1010 cm Air bellows replaced Tipper ABS fault (owner says it’s due to a sensor) Ready for delivery Narko timber trailer (1981): Year: 1981 EU approved until: 30.06.2026 Left rear brake band replaced Faulty sensor Ready for delivery Cranab CRX 10 t/m crane (1993): Certified until July this year New diesel heater Cabin heater

Year of construction: 2021, condition: used, Please provide reference number upon request: 22059 Specifications: Model year 2021 Weight: 2,500 kg Ready for delivery Own weight: 2500 Kjdsx Ip Utspfx Ahzjnf Model: Schmidt U-H2 klappvingeskjær = More information = Serial number: U-H2 52-75-1xxxx Please contact ATS Norway for more information

Year of construction: 2020, condition: used, Please provide reference number upon request: 22058 Specifications: Kjdpfxex Ip Ugj Ahzenf 2020 model Weight: 2635 kg Ready for delivery Own weight: 2635 Model: klappvingeskjær = More information = Serial number: U-H2 58-74-1xxxx Please contact ATS Norway for more information

Year of construction: 2021, condition: used, Please provide reference number upon request: 22061 Specifications: Ksdex Ip Tijpfx Ahzsnf 2021 model Approx. 5.5 meters wide Lightly used Ready for delivery Description: Folding wing from 2021.The owner has hardly used it.Ready for delivery. Own weight: 11 Model: 5,5 m = More information = Please contact ATS Norway for more information

Condition: used, machine/vehicle number: WDF4476031322xxxx, mileage: 266,000 km, Year of construction: 2016, Please provide reference number upon request: 21578 Specifications: Mileage: Approx. 266,000 km Transmission: Automatic Tow hitch Side door Tires (see photos) Summer and winter tires 3 seats 190 hp Diesel Service done by owner Radio/CD Air conditioning / climate control Video available Ready for delivery Description:Mercedes Vito 119CDI van from 2016.The vehicle is EU-approved and ready for delivery.Sold as is with 2 sets of tires. Knjdpexp Arxjfx Ahzof Km: 266000 HK: 190 Technical approved: Yes EU-approved until: 21.02.2026 Own weight: 2001 Total Weight: 2800 Payload: 724 Width: 192,8 Length: 514 Euro: 6 Model: VITO Gearbox: Automatic Number of seats: 3 = More information = Please contact ATS Norway for more information