Used Müller-Mitteltal Car Transport Trailers for sale (257)

Condition: used, mileage: 1,100 km, gearing type: other, color: white, overall weight: 32,000 kg, empty load weight: 6,600 kg, maximum load weight: 25,400 kg, tire size: 425/65R22,5, first registration: 03/2016, suspension: air, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, BPW axles, air suspension, 1st axle can be lifted, ABS (anti-lock braking system), underbody protection, supports. Djdpfx Aoi Rk Axeafocp Superstructure: Liebherr concrete mixer, type HTM 1004, approx. 10 m³, 2 x 10t BPW axles! Suitable hydraulics for engine-driven power take-off on the towing vehicle available at an extra cost! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, axle configuration: 3 axles, suspension: parabolic leaf (spring), tire size: 235-75R17.5, 3-axle lowboy trailer, drive-over design from the rear. Permissible total weight 30,000 kg, payload 22,700 kg. Loading area 8,900 mm (7,000 + 1,900) x 2,550 mm, warning package for overwidth, 12 lashing points and 8 pocket slots for simultaneous lashing, 6 toolboxes. Two-part hydraulic ramps approx. 2,100 + 2,000 x 800 mm with rubber surface, hydraulic rear support. BPW axles, EBS, parabolic suspension with equalizer, tires 235-75 R 17.5. Drawbar bent, swivel drawbar eye 40 + 50 mm. 2-line air (Duomatik), 2-line hydraulic, 24 Volt. Loading height when empty approx. 910 mm. Painted orange. Valid TÜV (technical inspection) until 03-2027. Dcedpfsy Evvlex Aafjp = Further information = Year of manufacture: 2010 Tire size: 235-75R17.5 Suspension: Parabolic suspension Unladen weight: 7,300 kg Payload: 22,700 kg GVW: 30,000 kg Country of production: DE Please contact Jan-Marc Schwickert for further information.

Condition: used, overall weight: 40,000 kg, first registration: 11/2006, loading space width: 2,500 mm, Year of construction: 2006, Equipment: ABS, MÜLLER - MITTELTAL T4 Compact Turntable Trailer - Low-bed trailer with air suspension and wheel recesses * 4 x air-suspended GIGANT axles * air suspension * 4 x wheel recesses Dsdpfe Ahp Rmjx Aafocp * mechanical ramps * 2 retractable rear supports * extendable warning signs * ABS * MICHELIN tires: 235/75 R 17.5 * heavy-duty design: 40,000 kg GVWR * unladen weight: 8,400 kg * overall length: 11,750 mm * 50 mm drawbar eye Particularly suitable for the transport of lime mills! - German trailer - TÜV / technical inspection and registration upon request and possibly at an additional cost! Errors and prior sale excepted!

Condition: used, axle configuration: 2 axles, Tandem low-loader trailer, drive-through design. Loading platform approx. 4,500 x 2,010 x 330 mm (internal), loading height approx. 600 mm, 14 lashing points. Loading ramps approx. 2,250 x 500 mm with grating. Tow hitch 50 mm, drawbar height adjustable. Height-adjustable support jacks at the front, drop-down supports at the rear. 2-line air brake system (Duomatik), 24 volts. BPW axles with equalizer, tires 235-75R17.5. Tool box. Permissible total weight 10,700 kg, payload 8,450 kg. Vehicle completely hot-dip galvanized. Dcjdpfxs Ahn Hvo Aafjp = Further information = Year of manufacture: 2010 Unladen weight: 2,250 kg Payload: 8,450 kg GVW: 10,700 kg Front tire size: 235-75R17.5 Rear tire size: 235-75R17.5 Country of origin: DE Please contact Jan-Marc Schwickert for further information.

Condition: used, maximum load weight: 17,290 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 06/2017, next inspection (TÜV): 07/2026, loading space length: 8,900 mm, loading space width: 2,520 mm, Equipment: ABS, * ABS * 5-chamber tail lights * Orange rotating beacon * Duomatic air coupling * BPW ECO axles ----Superstructure: Low-bed trailer, galvanized frame (1900+7000mm)/loading height approx. 900mm, rear end sloped/loading ramp height approx. 770mm, steel/wooden floor, extendable to 3 meters, hydraulic drive-on ramps (galvanized) with anti-slip coating, ramps also hydraulically side-shiftable, lashing rings Dodpfxoyulu Uo Aafscp Sale only to business customers. FOR EXPORT, ONLY THE NET PRICE IS PAYABLE!!!!! ALL INFORMATION WITHOUT GUARANTEE, ESPECIALLY REGARDING EQUIPMENT & ACCESSORIES. All purchase contracts, invoices, pro forma invoices, orders, and sales discussions are subject to our General Terms and Conditions (see legal notice for details).

Condition: used, maximum load weight: 7,100 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 07/2007, loading space length: 5,000 mm, loading space width: 2,450 mm, loading space height: 1,100 mm, total width: 2,550 mm, Vehicle / Body: Tandem three-way tipper First registration: 07/07 Gross weight: 10,000 kg Unladen weight: 2,900 kg Payload: 7,100 kg Overall length: 6,900 mm Loading length: 5,000 mm Width: 2,550 mm / loading width approx. 2,450 mm Loading height: approx. 1,100 mm Additional information - 40 km/h - 500 mm side walls - 500 mm galvanized front extension - 7 pairs of lashing rings on loading area - 4 pairs of lashing rings on exterior underbody - Support leg - Rear support - Drop side lifting spring - Drive-on ramps optional at €1,280.00 Djdpfx Aasyz H Azofecp

Condition: used, axle configuration: 2 axles, first registration: 03/2004, Equipment: ABS, = Additional options and accessories = - EBS = More information = Dcjdpfexyx Haex Aafjp Year of construction: 2004 Empty weight: 4.850 kg Carrying capacity: 13.150 kg GVW: 18.000 kg Tyre tread remainder on axle rear: 60% Suspension on axle rear: air Purchase on credit is possible: Yes

Condition: excellent (used), axle configuration: 2 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, first registration: 11/2013, loading space length: 6,400 mm, loading space width: 2,490 mm, loading space height: 930 mm, total length: 6,400 mm, total width: 2,490 mm, total height: 930 mm, suspension: air, tire size: 235/70 R17.5, tire condition: 80 %, color: other, Equipment: ABS, tail-lift, = Additional options and accessories = - 2 axles - Air suspension - Tailgate = More information = General information Year of construction: 2013 Registration number: QAPT117 Technical information Chassis: GALVANISED / GEGALVANISEERD / GALVANISEE Dcodpj Aavmuofx Aafep Axle configuration Tyre size: 235/70 R17.5 Make axles: BPW Tyre profile: 80% Brakes: drum brakes Suspension: air suspension Rear axle 1: Double wheels; Max. axle load: 9000 kg Rear axle 2: Double wheels; Max. axle load: 9000 kg Weights Empty weight: 4.200 kg Carrying capacity: 13.800 kg GVW: 18.000 kg Functional Height of cargo floor: 93 cm Condition Technical condition: very good Visual appearance: very good Damages: none Financial information Price: On request

Condition: used, axle configuration: 3 axles, suspension: air, tire size: 235-75R17.5, = Additional Options and Accessories = - Central lubrication system = Notes = 3-axle flatbed low loader trailer. Permissible total weight 30,000 kg, payload 23,570 kg. Loading area approx. 6,900 x 2,550 mm, warning kit for oversized loads, rotating beacon, detachable aluminum front wall 600 mm, 34 lashing points, 2 twistlock container locks, 4 Exte side rails. Aluminum ramps in a lockable ramp compartment. Toolbox. BPW axles, air suspension, 2nd axle can be lifted, EBS, tires 235-75R17.5, spare wheel with holder. Loading height approx. 910 mm. Drawbar eye 40 mm, 2-line air (Duomatic), 24 Volt. Central lubrication. Vehicle hot-dip galvanized, outer frame additionally painted yellow. Aluminum ramps Lift axle Central lubrication system = Further Information = Year of construction: 2017 Tire size: 235-75R17.5 Suspension: Air suspension Unladen weight: 6,430 kg Payload: 23,570 kg GVW: 30,000 kg Djdpfx Aasz Aankofecp Country of production: DE Please contact Jan-Marc Schwickert for further information.

Condition: new, maximum load weight: 13,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA-Kombi 18.0: * 3-in-1 = for skip, roll-off containers, and as a low loader ----Brake System: * RDÜ Tire Pressure Monitoring System * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm towing eye and adjustable height mechanism ----Electrics / Lighting: * LED tail lights * 15-pin electrical connector * RDÜ (tire pressure monitoring), indication possible in the truck via EBS signal (no vehicle-side installation required) ----General Attachments: * Toolbox made of powder-coated sheet steel, mounted on the right side * Side underrun protection * Plastic quarter mudguards with spray protection * Storage box for container nets made of galvanized sheet metal, approx. 960 x 300 x 400 / 450 mm, right side * Rear plastic bumper pads * Mechanical drop-down supports at the rear ----Loading Area: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roll containers * Steel floor with recessed rollers in the bogie area * For roll-off container transport, container lengths from 5,500 to 7,000 mm possible Dedpfxol Thwco Aafocp * Pneumatic 4-point clamp locking system and mechanical removable front guide blocks in the track, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * 8 repositionable skip stoppers for lateral centering of skips, front 4 stoppers inserted with pivoting stop * Weld bead as anti-slip coating in the approach ramp area ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning devices for friction-locked and form-fit securing of skips * 4 cloverleaf-type lashing brackets on each side * 1 pair of 13.4 t UVV lashing rings at the front ----Ramps: * 1 pair of aluminum approach ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Info: * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Permissible gross weight technically up to 20,000 kg * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. calendar week 44 / 2026

Condition: new, maximum load weight: 13,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA-Kombi 18.0: * 3 in 1 – suitable for roll-off containers, skip containers, and as a low loader ---- Brakes: * TPMS (Tire Pressure Monitoring System) * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders ---- Axles: * 2 x 12 t Gigant axles ---- Suspension: * Parabolic springs ---- Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm drawbar eye with height adjustment ---- Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System), display option in the truck via EBS signal (no truck-side installation required) ---- General Attachments: * Toolbox made from powder-coated sheet steel, right side * Side underrun protection * Plastic quarter mudguards with spray protection * Storage box for container nets, galvanized sheet, approx. 960 x 300 x 400/450 mm on right side * Plastic impact protection buffer at the rear * Mechanical drop supports at the rear ---- Loading Area: Dodpfx Aaol Thv Rofscp * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding roll containers * Steel floor with roller recesses in the bogie area * Suitable for roll-off containers with a container length of 5,500 - 7,000 mm * Pneumatic 4-point clamp lock as well as mechanically pluggable front stops in the rail, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum capacity of 10 m³ possible * Includes 8 repositionable skip centering stops for lateral centering, front 4 stops are plug-in with pendulum stop * Weld bead as anti-slip coating in the ramp pathway area ---- Load Securing: * 3 pairs of 10 t UVV lashing rings, side-mounted for attaching tensioning elements, for positive and friction-locked securing of skips * 4 lashing rails per side in cloverleaf design * 1 pair of 13.4 t UVV lashing rings at the front ---- Ramps: * 1 pair of aluminum approach ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment at rear) ---- Info: * Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Technically permissible gross weight: 20,000 kg * New vehicle with manufacturer's warranty * Subject to errors and prior sale ---- Delivery time: * Available from approx. week 44 / 2026

Condition: new, Cable reel transport trailer. Permissible total weight 9,900 kg, payload 7,380 kg. Hydraulic lifting and lowering of the cable reel from the towing vehicle or by means of a 4-stroke gasoline engine, protective cover, reel drive hydraulically with rubber-coated drive rollers, reel diameter 800-3,000 mm, reel width up to 1,650 mm, centering cones for cable reels. Two-speed support winch at the front, extendable rear support. BPW axle, EBS, parabolic suspension, tires 315-80R22.5, tire pressure monitoring. Towing eye 40 mm, height-adjustable, 2-line air, lighting 12+24 V LED. Tool box. Vehicle completely hot-dip galvanized. New vehicle including factory warranty. = Further information = Year of manufacture: 2026 Unladen weight: 2,520 kg Payload: 7,380 kg GVW: 9,900 kg Condition of rear tires: 100 Dcodpozp Dnbsfx Aafep Front tires: 315-80R22.5 Rear tires: 315-80R22.5 Country of production: DE Please contact Jan-Marc Schwickert for further information.

Condition: new, maximum load weight: 14,660 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, ETÜ-TA-R 19.0: ----Brakes: * Wabco EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10-ton BPW Eco axles ----Suspension: * Parabolic springs - 110 mm wide - with tandem equalizer ----Drawbar / Flange coupling: * Drawbar with 50 mm flange coupling and height-adjustable drawbar ----Electrical system / Lighting: * 15-pin power connector * LED tail lights * TPMS (Tire Pressure Monitoring System) ----General components: * Jost support leg at the front * Outboard folding supports at the rear * Side underrun protection * Plastic quarter fenders ----Low-loader platform: * 50 mm hardwood flooring * Mounting point in front of the front wall for subsequent installation of container locking devices * Bolted front wall made of smooth sheet metal * Steel side walls - trapezoidal profile - foldable with side rail spring lift * Steel rear wall that slides in between the ramps - holder when not in use inside the front wall * Rear crossbars bolted on ----Load securing: * Perforated outer frame angled at approx. 45 degrees with a lashing force of 2 tons every 480 mm * Installation of 3-ton drop-side lashing brackets every 600 mm possible * At the front and rear corners, 1 x 10-ton lashing point each, various holes in the front and end crossmembers for 1.2-ton lashing options * Profifix lashing rail in the longitudinal axis in the middle for lashing options up to LC 3000 daN ----Ramps: * One-piece mechanical grid ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (can be pushed together to 20 mm) * Approach angle at the rear approx. 860 mm ----Painting: * Chassis, drawbar, front wall, rear wall, ramps, and folding supports hot-dip galvanized * Painting of the side walls in RAL 9010 pure white Dcedpfsl Th Hlsx Aafjp * Painting of the side walls in an RAL color possible for an extra charge * Axles, springs, air tank, flange coupling, and support leg painted in a black tone ----Information: * New vehicle with full manufacturer's warranty * Errors and prior sale reserved ----Delivery time: * Available for immediate delivery from Egestorf near the A7.

Condition: new, maximum load weight: 23,940 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profi 30.0 ----Brakes: * EBS braking system * Emergency release system for spring brake cylinders * Drum brakes Djdpfx Aol Th Nnoafecp ----Axles: * 3 x 11-ton Gigant axles ----Suspension: * Parabolic springs with mechanical axle compensation at the rear ----Drawbar: * Drawbar with 50 mm drawbar eye and height adjustment via coil spring and tension lock ----Lighting / Electrical System: * TPMS (Tire Pressure Monitoring System) * Multi-voltage system * LED tail lights 12 / 24 V * Rotating beacon (removable) at the rear * 15-pin power connector ----General Components: * Side impact protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front fender made of molded plastic and rear fender made of straight, galvanized steel sheet, each with splash protection * Toolbox made of galvanized steel sheet - black powder-coated - approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for the toolbox in the turntable platform * 4 lashing pockets on each side (but no lashing bars included) with simultaneous lashing capability ----Load Securing (Load Securing Package consisting of): * 2 lashing eyes (6.4 tons) at the front left and right on the main frame of the turntable platform * 6 pairs of UVV lashing rings, swiveling and lowerable, loadable in all directions and recessed in the outer frame * 13.4 tons in the corners, otherwise 10 tons ----Widening: * 6 pairs of mechanical folding outriggers for a total width of 3 meters (but not in the rear slope) * Widening boards placed in the middle of the loading area ----Ramps: * Hot-dip galvanized, one-piece hydraulic ramps (approx. 3,000 x 720 mm), mechanically adjustable on the side * 4-way control unit for retrofitting the hydraulic side ramp adjustment ----Loading Area: * Above the slewing ring: approx. 1,960 x 2,520 mm & unloaded approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unloaded approx. 910 mm (incl. 860 mm approach ramp) ----Tires: * 235/75 R 17.5 twin tires ----Unladen Weight: * Approx. 5,980 kg unladen weight ----Paintwork: * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in a black tone ----Information: * Technically possible gross vehicle weight of 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Immediately available from Egestorf

Condition: new, maximum load weight: 10,800 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic leaf springs with equalising unit ----Drawbar / Flange Tow Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm ----Electrics / Lighting: * Tyre pressure monitoring with display option in the truck via EBS signal - no installation required on the truck side * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Support winch at the front * Rear external folding supports * Plastic toolbox approx. 858 x 500 x 500 mm mounted front right on the bulkhead exterior * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood flooring * Preparation in front of the bulkhead for subsequent fitting of container locks * Bolted, 400 mm smooth-sheet bulkhead * Bolted rear stanchions * Side panels with spring assist ----Load Securing: * Perforated outer frame, bent approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing point each in the front and rear corners * Various drilled holes in the front and rear cross members for 1.2 t lashing options * Profifix lashing rail centrally in the longitudinal axis for lashing up to LC 3000 daN Dcodpfx Aasrwc R Aofjp ----Ramps: * One-piece hydraulic mesh loading ramps approx. 2,750 x 600 mm (can be pushed together up to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck over 40 ltr./min. up to 140 ltr./min. max) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical drop legs, and loading ramps hot-dip galvanised * Axles, springs, air tanks, front support winch, and flange tow eye painted in a black tone * Side panels painted in RAL 9010 pure white * Painting of side walls in any RAL colour available at extra cost ----Info: * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Sample images ----Delivery time: * Available immediately ex Egestorf

Condition: new, maximum load weight: 10,800 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring-loaded brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Drawbar height-adjustable by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring system with in-cab display via EBS signal (no truck-side installation required) * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: Dcjdpfx Aaerwc R Rsfep * Support winch at the front * External folding support legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm mounted front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood floor * Provision in front of the bulkhead for retrofitting container locks * Bolted 400 mm high smooth steel bulkhead * Bolted rear posts * Drop sides with spring assist ----Load Securing: * Perforated outer frame, approximately 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashings every 600 mm * One 6.3 t lashing ring in each front and rear corner * Various holes for 1.2 t lashing points in the front and rear crossmembers * Profifix lashing rail, centered lengthways, for lashing up to LC 3,000 daN ----Ramps: * One-piece hydraulic mesh loading ramps, approx. 2,750 x 600 mm (collapsible to 20 mm clearance) * Hydraulic flow divider installed in trailer (for hydraulic pump flow from the truck exceeding 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical folding supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange towing eye painted black * Drop side panels painted in RAL 9010 pure white * Painting of side panels in any RAL color available at extra cost ----Information: * New vehicle with manufacturer warranty * Subject to misprints and prior sale ----Delivery time: * Immediately available ex-works Egestorf

Condition: used, maximum load weight: 9,400 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 07/2020, loading space length: 6,300 mm, loading space width: 2,480 mm, Ref. No.: ZANDT Very well-maintained tandem flatbed trailer ZANDT Cargo * TAT B 110 * Flatbed * Reinforced wooden floor * Heavy-duty lashing rails * 2-axle tandem * Wide tires * Adjustable drawbar * Perm. gross weight 11,900 kg * Very good condition Trade-in possible Financing from 3.99% Errors and prior sale excepted! The details in this ad are non-binding descriptions and do not constitute guaranteed characteristics. The seller assumes no liability for typographical or data transmission errors. Listed equipment must be verified separately. All information provided in the listings is non-binding! Dcsdpfxoymuz Uj Aafsp Delivery possible throughout Germany upon request Opening hours: Monday to Thursday from 9:00 a.m. to 5:00 p.m., Friday from 9:00 a.m. to 2:00 p.m., and by appointment!

Condition: new, maximum load weight: 31,630 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 9,250 mm, loading space width: 2,520 mm, Year of construction: 2026, * T 4: * EBS * Emergency release system for spring accumulators * Drum brakes * 4 x 11 to. Gigant axles * Parabolic springs * Mechanical axle compensation at the front and rear * Tire pressure monitoring system with display option in the truck via EBS signal - without installation on the truck side * Warning sign packages at the front and rear * Reflective contour strip on the sides and at the rear * EBS multi-voltage system for 12 & 24 V electrical systems * LED rotating beacon (removable) at the rear * 24 V - 15-pin, as well as an additional 12 V - 7+4 pin - power cable * Extended connecting cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm drawbar eye and stepless height adjustment * Toolbox made of powder-coated sheet steel and spare wheel holder in the body structure on the right side * Closed plastic fender at the front * Straight steel mudguards at the rear, each with splash protection (spray mist suppression) * Side impact protection * Extended offset overhang extended by 500 mm to the front * Turntable platform extended by 520 mm with 45° corners and 3 recessed storage compartments including covers and lockable * Chassis made of high-strength fine-grained steel * Floor above the turntable platform made of 50 mm and in the low-loader platform made of 60 mm hardwood * Outer planks of the loading ramps made of 50 mm bamboo wood * 4 lashing pockets on each side (but no lashing bars included) with simultaneous 2 to lashing capability * Lasi package consisting of: 2 lashing eyes, 6.4 to, at the front left and right on the main frame of the turntable platform, 1 pair of 13.4 to lashing rings on the outer frame on each side at the front and rear, as well as 4 pairs of 10 to lashing rings on each side, pivotable and lowerable, loadable in all directions and recessed in the outer frame, 2 pairs of lashing rings, 6.4 to, on each side in the excavator arm rest, 8 pairs of galvanized folding outriggers for a total width of 3 m (but not in the rear slope) * Extension planks stored in a compartment on the left side * Excavator arm rest above the rear axle to the end of the loading ramp, approximately 2,300 x 740 x 190 mm * Mechanical support legs at the rear * Hydraulic, hot-dip galvanized loading ramps, approx. 3,000 x 720 mm * Hydraulic side ramp adjustment on sliding tube from the ramp shaft * Loading area above the turntable: approx. 2,990 x 2,520 mm, * Rear loading area: approx. 6,280 x 2,520 mm * Loading height when loaded approx. 860 mm (including 860 mm loading ramp) * Chassis, turntable, loading ramps, mechanical folding supports at the rear, hot-dip galvanized * Axles, springs, air tanks and turntable painted in a black tone * New vehicle with manufacturer's warranty Dcsdpfx Aol Th Evjafjp * Errors and prior sale are subject to change * Available immediately from Egestorf

Condition: new, maximum load weight: 6,870 kg, overall weight: 9,900 kg, axle configuration: 1 axle, Year of construction: 2026, * KWH 9.9 ML: ----Brakes: * EBS braking system * Drum brake * Emergency release device for spring-loaded cylinders Dcedpfx Aaou I Iq Eofep ----Axle: * BPW axle ----Suspension: * Parabolic springs ----Drawbar / Flange drawbar: * Drawbar with 40 mm threaded drawbar eye (height-adjustable in mm) ----Electrical system / Lighting: * 15-pole electrical connector * LED lighting * Flashing LED side marker lights * TPMS (Tire Pressure Monitoring System) ----General components: * Front support winch * Spring-assisted square tube supports at the rear with base plate, safety locking pins for various support heights * Enclosed fenders made of sheet steel with splash guard * Enclosed side impact protection, can be used as an advertising surface * Plastic toolbox with bottom insert (horizontal installation), approx. 500 x 350 x 400 mm ----Superstructure: * Swiveling cable drum superstructure, width between the drum arms 1,700 mm, with clamping mechanism for securing the drum at the ends of the support arms, as well as a locking mechanism of the cable drum superstructure to the chassis by means of a centrally arranged claw lock * Motor-hydraulic drum drive with oil motor * Valves and sliding, rubber-coated drive rollers * Hydraulic speed control and brake for drum drive * Steel drum shaft with 76 mm diameter, centering and rotatable ends * 1 pair of centering cones made of polyamide, stepped ----Chassis: * Chassis made of torsion-resistant square tubes and cross members ----Pump unit: * Hydraulic pump unit with diesel engine * Fuel tank and manual starter * 6.5 HP with gear pump (150 bar) ----Tires: * 315/80 R 22.5 ----Unladen weight: * 2,690 kg unladen weight ----Paint finish: * Vehicle is hot-dip galvanized ----Information: * New vehicle with full manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available from Egestorf

Condition: new, maximum load weight: 6,870 kg, overall weight: 8,800 kg, axle configuration: 1 axle, Year of construction: 2026, * KWH 9.9 ML: ----Brakes: * EBS braking system * Drum brake * Emergency release device for spring-loaded cylinders ----Axle: * BPW axle ----Suspension: * Parabolic springs ----Drawbar / Flange coupling: * Drawbar with 40 mm screwed coupling (height-adjustable, in mm) ----Electrical system / Lighting: * 15-pole power connector * LED lighting * Flashing LED side marker lights * TPMS (Tire Pressure Monitoring System) ----General components: * Front support jack * Spring-assisted square tube supports at the rear with base plate, safety locking pins for various support heights * Closed steel sheet fenders with splash guards * Closed side impact protection, usable as an advertising space * Plastic toolbox with base insert (horizontal installation), approx. 500 x 350 x 400 mm ----Superstructure: * Swiveling cable drum superstructure, width between the drum arms 1,700 mm with a clamping mechanism to secure the drum at the end of the support arms, and a locking mechanism for the cable drum superstructure with the chassis by means of a centrally arranged claw lock * Motor-hydraulic drum drive with oil motor * Valves and adjustable rubber-coated drive rollers * Hydraulic speed control and brake for drum drive * Steel drum shaft with 76 mm diameter, centering and rotatable ends * 1 pair of centering cones made of polyamide, stepped ----Chassis: * Chassis made of torsionally rigid square tubes and cross members ----Pump - Unit: * Hydraulic pump unit with diesel engine * Fuel tank and manual starter * 6.5 HP with gear pump (150 bar) ----Tires: * 315/80 R 22.5 ----Unladen weight: * 2,690 kg unladen weight ----Paintwork: * Vehicle is hot-dip galvanized ----Information: Dedpfx Aju I Iqloafjcp * New vehicle with full manufacturer's warranty * Errors and prior sale are subject to change ----Delivery time: * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 6,870 kg, overall weight: 9,900 kg, axle configuration: 1 axle, Year of construction: 2026, * KWH 9.9 ML: ----Brakes: * EBS braking system * Drum brake * Emergency release device for spring-loaded cylinders ----Axle: * BPW axle ----Suspension: * Parabolic springs ----Drawbar / Flange drawbar: * Drawbar with 40 mm threaded drawbar coupling (height-adjustable in mm) ----Electrical system / Lighting: * 15-pole power plug * LED lighting * Flashing LED side marker lights * TPMS tire pressure monitoring system ----General components: * Front support jack * Spring-supported square tube supports at the rear with base plate, safety locking pins for different support heights * Closed mudguards made of sheet steel with splash protection * Closed side impact protection, can be used as an advertising space * Plastic tool box with base insert (horizontal installation) approx. 500 x 350 x 400 mm ----Superstructure: * Swiveling cable drum superstructure, width between the drum arms 1,700 mm with a clamping device to secure the drum at the ends of the support arms, and a locking mechanism for the cable drum superstructure with the chassis using a centrally arranged claw lock * Motor-hydraulic drum drive with oil motor * Valves and sliding, rubber-coated drive rollers * Hydraulic speed regulator and brake for drum drive * Steel drum shaft with 76 mm diameter, centering, and rotatable ends * 1 pair of centering cones made of polyamide, stepped ----Chassis: * Chassis made of torsion-resistant square tubes and cross members ----Pump unit: * Hydraulic pump unit with diesel engine * Fuel tank and manual starter * 6.5 HP with gear pump (150 bar) ----Tires: * 315/80 R 22.5 ----Unladen weight: * 2,690 kg unladen weight ----Painting: * Vehicle is hot-dip galvanized ----Information: * New vehicle with full manufacturer's warranty * Errors and prior sale excepted Dcjdpfx Aaju I Iqxofjp ----Delivery time: * Immediately available from Egestorf

Condition: new, maximum load weight: 16,000 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 700 mm, Year of construction: 2024, * KA-TA-RT 21.0 ML ----Brakes: * Without ABS/EBS, approved for 40 km/h * Spring brake parking brake Dsdpfx Asr Dpzuoafocp * Drum brakes ----Axles: * Gigant axles ----Suspension: * Tandem equalizer with 100 mm wide parabolic springs ----Drawbar eye / Drawbar: * Fixed welded drawbar with low-maintenance collar for K80 ball coupling (adjustable by +77 mm / 33 mm via headplate) with high-set gantry for connection lines ----Electrical system / Lighting: * 12 V, 7 + 4-pole power cable * LED lighting system 12 / 24 V with protective grille * 2 LED work lights at the rear, switchable from the towing vehicle without installation on the towing vehicle side ----General components: * Front support jack * Mech. drop-down supports at the rear * Side marker lights with turn signal control * Plastic quarter fenders * Plastic toolbox approx. 750 x 350 x 300 mm on the right side * Hot-dip galvanized, two-step access ladder in front of the headboard (on the left side) ----Chassis: * Chassis made of fine-grained steel ----Tipping body: * Steel pallet-type 3-way tipping body with M-Strong sideboards (front wall fixed, continuous side walls - without center rails - pivoting via manual central locking and mechanically foldable with sideboard spring lifter) * Hydraulic tailgate 500 mm high as hydraulic tipping gate with a 115° opening angle * 4 mm Hardox 450 steel floor ----Load securing: * 1 x 7 t. recessed and foldable lashing eye at each corner * 4 x 3 t. recessed and foldable lashing eyes on each side ----Ramps: * 1 pair of aluminum loading ramps (10 t / pair with axle distance over 2,500 mm) 3,570 x 410 x 120 mm, suitable for rubber-tired and tracked vehicles * 2 receptacles for aluminum loading ramps recessed at the rear in the chassis, load securing according to EN 12642 XL ----Coupling height: * loaded approx. 530 mm & unloaded approx. 590 mm ----Painting: * Body painted in RAL 9010 pure white * Chassis, drawbar, drop-down supports at the rear, underrun protection hot-dip galvanized * Axles, air tank, front support jack * K80 coupling painted in a black tone ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale subject to change ----Delivery time: * Available immediately from Egestorf

Condition: used, maximum load weight: 7,950 kg, overall weight: 11,000 kg, axle configuration: 2 axles, first registration: 08/2010, next inspection (TÜV): 02/2026, loading space length: 6,000 mm, loading space width: 2,470 mm, loading space height: 900 mm, total width: 2,550 mm, Gross weight: 11,000 kg Unladen weight: 3,050 kg Payload: 7,950 kg Overall length: 8,100 mm Loading length: total approx. 6,000 mm Width: 2,550 mm / loading width approx. 2,470 mm Loading height: 900 mm Dcodsx E I Utspfx Aafjp Additional information - Height-adjustable drawbar - Support leg - 400 mm drop sides, spring-mounted - E-wheel - BPW axles - Spring ramps with grating, laterally adjustable - Climbing strips, rear stabilizer - Large lashing package

Condition: used, axle configuration: 3 axles, first registration: 06/2007, color: blue, Equipment: ABS, = Additional options and accessories = - Central lubrication - Twin wheels = More information = Dcedpfx Aajzr H Rdofep General information Year of construction: 2007 Financial information Selling price: € 14.900, US$ 16.710 VAT/margin: VAT qualifying Other information Tyre tread remainder on axle 1: 60% Brake type on axle 1: drum Make of axle 1: BPW Suspension on axle 1: spring Tyre tread remainder on axle 2: 60% Brake type on axle 2: drum Make of axle 2: BPW Suspension on axle 2: spring Tyre tread remainder on axle 3: 60% Brake type on axle 3: drum Make of axle 3: BPW Suspension on axle 3: spring Tyre tread remainder on axle rear: 60% Brake type on axle rear: drum Make of axle rear: BPW Suspension on axle rear: spring Purchase on credit is possible: Yes Purchase by installments is possible: Yes Leasing is possible: Yes

Condition: new, maximum load weight: 16,000 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 700 mm, Year of construction: 2024, * KA-TA-RT 21.0 ML ----Brakes: * Without ABS/EBS, approved for 40 km/h * Spring brake parking brake * Drum brakes ----Axles: * Gigant axles ----Suspension: * Tandem equalizer with 100 mm wide parabolic springs ----Drawbar/Drawtube: * Fixed welded drawtube with low-maintenance cap for K80 ball coupling (adjustable by +77 mm / 33 mm via the head plate) with a high-mounted gantry for the connection lines ----Electrical System/Lighting: * 12 V, 7 + 4-pole power cable * LED lighting system 12/24 V with protective grille * 2 LED work lights at the rear, switchable from the towing vehicle without installation on the towing vehicle side Dcsdpfx Aaor Dpz Hofop ----General Components: * Front support jack * Mechanical drop-down supports at the rear * Side marker lights with turn signal control * Plastic quarter fenders * Plastic toolbox, approx. 750 x 350 x 300 mm, on the right side * Hot-dip galvanized, two-step access ladder in front of the front panel (FR, left) ----Chassis: * Chassis made of fine-grain steel ----Tipping Body: * Steel pallet-sided 3-way tipping body with M-Strong side walls (front wall fixed, continuous side walls – without center rails – pivoting via manual central locking as well as mechanically foldable with side wall spring lifters) * Hydraulic tailgate, 500 mm high, as a hydraulic dump gate with a 115° opening angle * 4 mm Hardox 450 steel floor ----Load Securing: * 1 x 7 t lashing points each in the corners - recessed and foldable * 4 x 3 t lashing points each on the sides - recessed and foldable ----Ramps: * 1 pair of aluminum loading ramps (10 t/pair with axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for vehicles with rubber tires and tracked vehicles * 2 storage compartments for aluminum loading ramps, recessed in the rear of the chassis, load securing according to EN 12642 XL ----Coupling Height: * Loaded approx. 530 mm & unloaded approx. 590 mm ----Painting: * Body paint in RAL 9010 pure white * Chassis, drawtube, rear drop-down supports, underrun protection, hot-dip galvanized * Axles, air tank, front support jack * K80 coupling painted in a black tone ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale reserved ----Delivery Time: * Immediately available from Egestorf