Used Müller-Mitteltal Tipper Trailers for sale (261)

Condition: used, mileage: 1,100 km, gearing type: other, color: white, overall weight: 32,000 kg, empty load weight: 6,600 kg, maximum load weight: 25,400 kg, tire size: 425/65R22,5, first registration: 03/2016, suspension: air, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, BPW axles, air suspension, 1st axle can be lifted, ABS (anti-lock braking system), underbody protection, supports. Superstructure: Liebherr concrete mixer, type HTM 1004, approx. 10 m³, 2 x 10t BPW axles! Suitable hydraulics for engine-driven power take-off on the towing vehicle available at an extra cost! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Bedpfei Rk Axox Adweww

Condition: new, maximum load weight: 16,000 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 700 mm, Year of construction: 2024, * KA-TA-RT 21.0 ML ----Brakes: * Without ABS/EBS, approved for 40 km/h * Spring brake parking brake * Drum brakes ----Axles: Bwedpsr Dpzusfx Adwsw * Gigant axles ----Suspension: * Tandem equalizer with 100 mm wide parabolic springs ----Drawbar eye / Drawbar: * Fixed welded drawbar with low-maintenance collar for K80 ball coupling (adjustable by +77 mm / 33 mm via headplate) with high-set gantry for connection lines ----Electrical system / Lighting: * 12 V, 7 + 4-pole power cable * LED lighting system 12 / 24 V with protective grille * 2 LED work lights at the rear, switchable from the towing vehicle without installation on the towing vehicle side ----General components: * Front support jack * Mech. drop-down supports at the rear * Side marker lights with turn signal control * Plastic quarter fenders * Plastic toolbox approx. 750 x 350 x 300 mm on the right side * Hot-dip galvanized, two-step access ladder in front of the headboard (on the left side) ----Chassis: * Chassis made of fine-grained steel ----Tipping body: * Steel pallet-type 3-way tipping body with M-Strong sideboards (front wall fixed, continuous side walls - without center rails - pivoting via manual central locking and mechanically foldable with sideboard spring lifter) * Hydraulic tailgate 500 mm high as hydraulic tipping gate with a 115° opening angle * 4 mm Hardox 450 steel floor ----Load securing: * 1 x 7 t. recessed and foldable lashing eye at each corner * 4 x 3 t. recessed and foldable lashing eyes on each side ----Ramps: * 1 pair of aluminum loading ramps (10 t / pair with axle distance over 2,500 mm) 3,570 x 410 x 120 mm, suitable for rubber-tired and tracked vehicles * 2 receptacles for aluminum loading ramps recessed at the rear in the chassis, load securing according to EN 12642 XL ----Coupling height: * loaded approx. 530 mm & unloaded approx. 590 mm ----Painting: * Body painted in RAL 9010 pure white * Chassis, drawbar, drop-down supports at the rear, underrun protection hot-dip galvanized * Axles, air tank, front support jack * K80 coupling painted in a black tone ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale subject to change ----Delivery time: * Available immediately from Egestorf

Condition: used, empty load weight: 4,420 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 12/2008, loading space length: 5,000 mm, loading space width: 2,410 mm, loading space height: 950 mm, loading space volume: 12 m³, suspension: air, tire size: 385/65 R 22,5, wheelbase: 1,310 mm, color: green, Equipment: ABS, Drum brake EBS Payload 13,580 kg Swinging and folding aluminum side drop sides with lifting springs Rear steel dropside BPW axles Bjdpjrz Rtmefx Adweww Errors excepted

Condition: used, maximum load weight: 7,100 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 07/2007, loading space length: 5,000 mm, loading space width: 2,450 mm, loading space height: 1,100 mm, total width: 2,550 mm, Vehicle / Body: Tandem three-way tipper Bjdpfeyz H Azox Adweww First registration: 07/07 Gross weight: 10,000 kg Unladen weight: 2,900 kg Payload: 7,100 kg Overall length: 6,900 mm Loading length: 5,000 mm Width: 2,550 mm / loading width approx. 2,450 mm Loading height: approx. 1,100 mm Additional information - 40 km/h - 500 mm side walls - 500 mm galvanized front extension - 7 pairs of lashing rings on loading area - 4 pairs of lashing rings on exterior underbody - Support leg - Rear support - Drop side lifting spring - Drive-on ramps optional at €1,280.00

Condition: new, maximum load weight: 13,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 700 mm, Year of construction: 2026, * KA-TA-RT 18.0: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with lift and lowering system, including RtR valve and manual lowering for loading processes ----Drawbar / Flange Drawbar Eye: * Drawbar with force-locking height adjustment * 50 mm flange drawbar eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12 / 24 V integrated into the underrun protection ----General Attachments: * Support winch at the front * Externally mounted folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Plastic quarter mudguards ----Tipping Platform: * Three-way tipper platform made of high-strength steel with high M-Strong side boards and reinforced 180 bar tipping cylinder * Fixed smooth sheet steel front wall * Hardwood pad for excavator bucket, bolted to front wall * Continuous side walls (no central stanchion), foldable with board spring lift and swiveling via manual central locking * Rear stanchions bolted * Combination steel tailgate—2-winged, asymmetrically split, swiveling by 270° and lockable (not foldable), with additional pendulum frame for automatic tailgate opening during tipping. Locking via galvanized turning bar lock and central locking. Deactivation function for automatic tailgate opening when tipping backwards with opened tailgate. * 4 mm steel floor plate * Two-step access on front left * Ramp holder at the rear for drive-on ramps ----Load Securing: * Each corner equipped with 1 x 7 t lashing point * Each side equipped with 4 x 3 t recessed lashing rings in the outer frame ----Drive-on Ramps: * Recessed storage compartment in the chassis at the rear for ramps Bedpfxevin Ucs Adwoww * 1 pair of aluminum drive-on ramps (10 tons/pair), approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, front wall, tipper platform, underrun protection, and rear folding supports hot-dip galvanized * Side wall paintwork in any RAL color of choice (no special or metallic finishes), color may be changed up to approx. 6 weeks before completion * Axles, air reservoirs, flange drawbar eye, and front support winch painted in black ----Info: * --Load securing certificate according to EN 12642 XL? * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 45 / 2026

Condition: new, Cable reel transport trailer. Permissible total weight 9,900 kg, payload 7,380 kg. Hydraulic lifting and lowering of the cable reel from the towing vehicle or by means of a 4-stroke gasoline engine, protective cover, reel drive hydraulically with rubber-coated drive rollers, reel diameter 800-3,000 mm, reel width up to 1,650 mm, centering cones for cable reels. Two-speed support winch at the front, extendable rear support. BPW axle, EBS, parabolic suspension, tires 315-80R22.5, tire pressure monitoring. Towing eye 40 mm, height-adjustable, 2-line air, lighting 12+24 V LED. Tool box. Vehicle completely hot-dip galvanized. New vehicle including factory warranty. = Further information = Year of manufacture: 2026 Unladen weight: 2,520 kg Payload: 7,380 kg GVW: 9,900 kg Condition of rear tires: 100 Bwodpfx Adezp Dnbowow Front tires: 315-80R22.5 Rear tires: 315-80R22.5 Country of production: DE Please contact Jan-Marc Schwickert for further information.

Condition: new, maximum load weight: 10,400 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * ETK-TA-R 14.4: ----Brakes: * EBS * Emergency release system for spring brake cylinders * Drum brakes ----Axle: * 2 x 7-ton Gigant axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange coupling: * Drawbar adjustable in height by 300 mm with 40 mm flange coupling ----Electrical system / Lighting: * Tire pressure monitoring system with display option in the truck via EBS signal, without installation on the truck side * 15-pole power connector * LED tail lights ----General components: * Mechanical support winch at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm on the right side * Bolted underbody protection Bwsdpfx Adetr St Uowow * Plastic quarter fenders ----Frame: * Main frame made of fine-grain steel ----Tipping body: * Net hooks on the side and at the rear in the bearings of the central locking system, as well as 2 pieces on the front wall * Steel pallet-sided, 2-way tipping body, front wall fixed, made of smooth sheet metal, continuous side walls - without center rails, foldable with side board spring lifters, and pivoting via manual central locking * Rear rails bolted * Steel rear wall inserted in front of the ramps * 1 x 5-ton lashing eye in each corner, as well as 4 x 3-ton lashing eyes on each side, embedded in the outer frame * 4 mm floor made of fine-grain steel ----Ramps: * Two-part mechanical grating ramps with aluminum tip, 2,150 + 1,300 mm x 600 mm (manually adjustable to 80 mm) ----Painting: * Chassis, drawbar, rear rails, underbody protection, mechanical fall supports and ramps hot-dip galvanized * Axles, springs, air tanks, flange coupling and support winch painted in a black shade * Side boards and tipping body in RAL 9010 pure white * Painting of the side walls and tipping body in a RAL color is possible for an extra charge ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Available for immediate delivery from Egestorf

Condition: used, empty load weight: 4,500 kg, maximum load weight: 13,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 08/2015, next inspection (TÜV): 07/2025, loading space length: 4,800 mm, loading space width: 2,400 mm, loading space height: 1,000 mm, color: blue, Year of construction: 2015, gearing type: other, driver cabin: other, Equipment: ABS, * German trailer * Condition, see photos * Müller-Mitteltal 3-way tipper, type KA-TA-R 18.0 tandem * Tipper dimensions: 4,800 x 2,400 x 1,000 mm * Roll tarp * Air suspension * Disc brakes * Platform * Jost support leg * Payload 13,500 kg If a new TÜV inspection is required, we are happy to provide you with an offer from our partner workshops. Our offer generally does NOT include a new TÜV inspection, new DGUV, new SP, or new UVV. Bedpfowz H Nbex Adwsww You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure the buyer does not have any misconceptions regarding condition or suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All information provided without guarantee. We are not liable for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and features of the goods/vehicles. Subject to alterations, prior sale, and errors.

Condition: new, maximum load weight: 8,850 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2024, * KA-TA-R 11.9 'Masterline' ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (approx. 300 mm adjustment) with 40 mm flange towing eye ----General Attachments: * Jost mechanical landing leg at the front * Two mechanical, hot-dip galvanized rear folding support legs * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Bolted underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * 15-pin power connector * LED lighting * RDÜ tire pressure monitoring system ----Tipper Body: * Net hooks on sides and rear in the central locking bearings as well as 2 on the front wall * Steel pallet 3-way tipper body (continuous side walls, without center posts), foldable with drop side spring assistors * Rear corner posts bolted * Combination rear steel swing doors, double-leaf, asymmetrically split, can be swung and locked at 270° (not foldable), plus additional swinging frame for automatic tailgate opening during tipping; locking via galvanized rotary bar lock and central locking system * Deactivation function for the automatic tailgate feature when reversing with an open swing door * 4 mm steel floor plate * Rear ramp mounting rail ----Load Securing: * 1 x 5 t lashing ring in each corner * 4 x 3 t recessed lashing eyes in the outer frame on each side ----Ramps: * 1 pair aluminum drive-on ramps, approx. 3,310 x 400 mm (capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment for ramps, mounted under the load area, integrated into the chassis Bjdpel Thyxofx Adwoww ----Painting: * Drawbar, front wall, tipper body, rear posts, underrun protection, and mechanical support legs, hot-dip galvanized * Side walls and tailgate painted in RAL 9010 pure white * Side wall paint finish in a RAL color of your choice available at extra cost * Axles, springs, flange towing eye, air tank, and landing leg painted in black ----Additional Information: * Reinforced body with EN 12642 XL load securing certificate * New vehicle, never registered, with manufacturer's warranty * Subject to errors and prior sale ----Availability: * Available immediately from Egestorf on the A7

Condition: used, empty load weight: 2,910 kg, maximum load weight: 7,590 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 09/2009, next inspection (TÜV): 04/2025, loading space length: 4,500 mm, loading space width: 2,200 mm, loading space height: 450 mm, suspension: steel, tire size: 235/75R17.5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel body, 2 axles, BPW axles, tandem, leaf spring suspension, ABS (anti-lock braking system), lashing eyes, underbody protection, front support, rear support, swing flaps. Construction: Tandem 3-way tipping trailer with ramp shaft. Loading ramps available for an additional charge of €900.00 net! ACCESSORIES INFORMATION IS PROVIDED WITHOUT GUARANTEE. Subject to changes, prior sale, and errors! Bwodpev S H Sfefx Adwew - .

Condition: used, maximum load weight: 6,760 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 10/2024, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, loading space volume: 6 m³, Equipment: ABS, * 1874 - Vehicle ID for telephone inquiries * Type: KA-TA-R 11.9 * BPW axles, galvanized, leaf spring suspension, drawbar height-adjustable, rear support, 12 tie-down points, drum brakes, side panels fold down with spring support, ramps slide in, pendulum movements * Trailer derated without technical modification to a total weight of 10,000 kg * Tire 1st axle: 235/75R17.5 (10/10 mm) * Tire 2nd axle: 235/75R17.5 (9/9 mm) ----Our email address: Our service for you: - Procurement of short-term or customs license plates - Transportation/delivery throughout the EU - Customs clearance of vehicles to third countries Bjdpfszz Eumsx Adweww WhatsApp for English, German, Russian and other languages:

Condition: new, maximum load weight: 13,610 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 4,995 mm, loading space width: 2,380 mm, loading space height: 900 mm, Year of construction: 2026, * KA-TA-R 18 ----Brakes: * EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 2 x 9 ton Gigant axles ----Suspension: * Air suspension with leveling during tipping ----Electrical System / Lighting: * Tire pressure monitoring system with display option on the truck display via EBS signal - without truck-side installation - * 15-pin power socket * LED lighting with galvanized protective roof * 2 LED reversing lights ----Fifth Wheel Coupling / Drawbar: * Drawbar with 50 mm fifth wheel coupling (adjustable by +77 mm and -33 mm via offset plate) ----General Components: * Front support jack * Foldable, galvanized steel under-run protection for paver loading * Closed plastic individual fenders * Front panel platform made of grating with a step on the drawbar and handrails on the front panel ----Chassis: * Chassis made of fine-grain steel ----Tipping Body: * Steel 3-sided tipping body with aluminum side walls, asymmetrical - continuous without a center beam - pivoting via manual central locking, and foldable on the left with a side wall spring lift * Rear wall - made of HBW 400 steel - pivoting via automatic 2-claw locking system Bjdpfx Adjx Ipbyowsww * 5 mm steel floor made of HBW 450 steel ----Load Securing: * 4 x 3 ton lashing points on each side - recessed and foldable - embedded in the steel floor ----Covering Tarpaulin: * Covering tarpaulin - agate gray, similar to RAL 7038 - * Tarpaulin tensioning by means of ratchet straps on the sides and elastic straps at the front and rear ----Painting: * Chassis, under-run protection, front panel and drawbar hot-dip galvanized * Axles, air tank, support jack, fifth wheel coupling painted in a black tone * Painting of the side walls in a RAL color of your choice (no special or metallic paints), can be changed up to approx. 6 weeks before completion ----Information: * Reinforced and certified body according to EN 12642 XL incl. load securing certificate up to 19 tons. * New vehicle without initial registration with manufacturer's warranty * Errors and prior sale subject to change ----Delivery Time: * Available for immediate delivery from Egestorf

Condition: used, maximum load weight: 10,080 kg, overall weight: 13,500 kg, axle configuration: 2 axles, first registration: 08/2017, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, loading space volume: 6 m³, Year of construction: 2017, Equipment: ABS, Stock number 5820 Müller-Mitteltal 3-sided steel tandem tipping trailer / aluminum ramps / galvanized chassis / wide tires! ----* Manufacturer: Müller-Mitteltal * Type: KA-TA-R 13,5 * First registration: 08/2017 * Total weight: 13,500 kg * Unladen weight according to vehicle registration: 3,420 kg * Payload: 10,080 kg * Axles: 2 x Gigant / drum brakes Bwjdpfx Adozdm S Sjwjw * Suspension: leaf spring suspension * Tires: 385/55 R 19.5 approx. 50% on steel rims * EBS * Color: galvanized chassis, tipping body blue * Tipping body interior: approx. 6 m³ (5.00 m long x 2.42 m wide x 0.50 m high) * Extendable aluminum ramps * Towing hitch with 50 mm eye, height-adjustable * Tipping body with 4 pairs of foldable lashing eyes in the floor * Full-load support at the front * Additional supports at the rear (foldable) * Tool box at the front right * Quarter fenders * Load securing certificate * 1st owner German trailer!! German documents!! 1st owner!! Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, occasional errors may have crept into the text or the information provided. We assume no liability for errors, changes or interim sales. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: used, empty load weight: 3,500 kg, maximum load weight: 9,500 kg, overall weight: 13,000 kg, axle configuration: 2 axles, first registration: 11/1993, loading space length: 5,000 mm, loading space width: 2,200 mm, loading space height: 500 mm, suspension: steel, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel superstructure, 2 axles, tandem axle, leaf spring suspension, lashing eyes, side guards, front supports, swing-out tailgates. Bjdpfx Adszgu Sfjweww Superstructure: Tandem 3-way tipper trailer. Spare wheel available at an extra charge! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: used, empty load weight: 3,420 kg, maximum load weight: 7,080 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 04/1998, loading space length: 4,480 mm, loading space width: 2,220 mm, loading space height: 500 mm, suspension: steel, tire size: 245/70R19.5, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, leaf spring suspension, 2 axles, tandem axle, side guards, front support legs, rear support legs, swinging side gates, height-adjustable drawbar. Bwjdpfx Adjy U Ifdjwow Body: 3-sided tipping trailer. This trailer comes from the municipal administration! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: new, maximum load weight: 6,870 kg, overall weight: 9,900 kg, axle configuration: 1 axle, Year of construction: 2026, * KWH 9.9 ML: ----Brakes: * EBS braking system * Drum brake * Emergency release device for spring accumulators ----Axle: * BPW axle Bwedpfx Adju I Iqfswsw ----Suspension: * Parabolic springs ----Drawbar / Flange coupling: * Drawbar with 40 mm screwed coupling (height adjustable mm) ----Electrical system / Lighting: * 15-pole power connector * LED lighting * Flashing LED side marker lights * TPMS tire pressure monitoring system ----General components: * Front support winch * Spring-supported square tube supports at the rear with base plate, safety locking pins for different support heights * Closed fenders made of sheet steel with splash protection * Closed side impact protection, usable as an advertising surface * Plastic toolbox with bottom insert (horizontal installation), approx. 500 x 350 x 400 mm ----Superstructure: * Swiveling cable reel superstructure, width between the reel arms 1,700 mm, with a tensioning mechanism to secure the reel at the ends of the support arms and a locking mechanism for the cable reel superstructure to the chassis via a centrally arranged claw lock * Motor-hydraulic drum drive with oil motor * Valves and sliding rubber-coated drive rollers * Hydraulic speed control and brake for the drum drive * Steel drum shaft with 76 mm diameter, centering, and rotatable ends * 1 pair of centering cones made of polyamide, stepped ----Chassis: * Chassis made of torsion-resistant square tubes and cross members ----Pump unit: * Pump unit, hydraulically driven with Loncin gasoline engine, including manual and electric starter * Fuel tank and manual starter * 13 hp with gear pump (150 bar) ----Tires: * 315/80 R 22.5 ----Unladen weight: * 2,690 kg unladen weight ----Paint finish: * Vehicle is hot-dip galvanized ----Information: * New vehicle with full manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Available from approx. week 49/2026

Condition: new, maximum load weight: 8,650 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * KA-TA-R 11,9 Masterline ----Brakes: * Wabco EBS * Emergency release system for spring brake cylinders * Drum brakes ----Axle: * 2 x 5.5 tons BPW axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange coupling: * Height-adjustable drawbar by 300 mm with 40 mm flange coupling ----Electrical system / Lighting: * TPMS tire pressure monitoring system * Multivoltage * 15-pole power connector * 12 V 13-pole auxiliary cable * Extended connection cables for forestry and agricultural tractors * LED rear lights ----General components: * Mechanical support jacks at the front * 2 mechanical folding supports at the rear * Plastic toolbox on the right side * 2-step step on the front left side * Underrun protection bolted on * Plastic quarter fenders ----Tipping body: * Net hooks on the side and rear in the bearings of the central locking system, as well as 2 on the front wall * Steel pallet-sided 3-way tipping body (continuous side walls - without center supports - can be folded down with side panel spring supports, tailgate can be folded down and pivots via manual central locking) * 4 mm steel sheet floor * Receiving rail at the rear for loading ramps ----Load securing: * 1 x 5 ton lashing point in each corner * As well as 4 x 3 ton lashing points on each side, recessed in the outer frame ----Ramps: * 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 tons / pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment at the rear below the loading area, recessed in the chassis ----Tires: * Tire size 385/55 R 19.5 ----Painting: * Chassis, drawbar, tipping body, front wall, folding supports and rear cross members hot-dip galvanized * Axles, springs, air tank, flange coupling and support jacks painted in a black tone * Painting of the side panels in RAL - 9010 pure white ----Information: Bjdpfx Adeq Euageweww * Body reinforced with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available from approximately week 46/2026

Condition: used, maximum load weight: 14,300 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 07/2023, next inspection (TÜV): 11/2026, Year of construction: 2023, * HL - TA 20.0 ----Brakes: * Wabco EBS-E braking system * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake coupling ----Axle: * 2 x t SAF axles * 1st axle as lift axle (fully automatic) * Lift axle with +30 mm driving height via adjustment cylinder * Starting aid for shunting and forced lowering onto the first axle - controlled via speed-dependent EBS electronics - (no installation required on the truck side, additionally with cable for operation from the tractor) ----Air suspension: * Air suspension with lowering function via remote control ----Drawbar / Flange Towing Eye: * 50 mm flange-type adjustable towing eye - height adjustable by +77 mm and -33 mm - for 2 t support load ----Electrics / Lighting: * 15-pin power plug * 3-pin 12V auxiliary plug * LED lighting system 12 / 24V * 2 LED reversing lights operated via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connection cables for agricultural and forestry vehicles * Power supply for remote control 12+24 V via taillight ----General Attachments: * BPW landing gear at the front * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond aluminum rims * Pin-type tow coupling (use only when underrun protection is retracted) * Enclosed plastic half-shell single wheel mudguards * Two-step access ahead of the front wall on the left-hand side * Shovel and broom holder ahead of the front wall * 2 stainless steel toolboxes (matte finish), approx. 650 x 350 x 320 mm, right side * Enclosed side underrun protection usable as advertising surface ----Hydraulics: Bodpfox Dp Agex Adwoww * 2-circuit hydraulic connectors (engine side from truck/tractor), rated for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted right front) operated via remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (Serial No. 100746129, year 2023) * Base frame made of high-strength fine-grain steel * 20,000 kg pulling force * Hook height 1,570 mm * Hooklift operation via remote control * Remote with fast feed for unloading, but not for lifting * Emergency stop switches on left and right sides * Container support with four side supports and one roller at the rear on each side * Hydraulic rear interior locking * 2 additional hydraulic cylinders to assist main boom lifting * 2 x mechanical drop-down supports at the rear * Approval for 20 t gross weight (2 x 9 t axles) and 2 t support load * Note: If the remote control is outside the charging cradle, the service brake must be applied to activate the remote. Brake connections must remain connected at all times to open the hydraulic/pneumatic control valves * Monitoring system for underrun protection ensuring it is retracted during tipping ----Loading Height: * Unladen: approx. 1,300 mm with lowered lift axle ----Coating: * Chassis, drawbar, access steps, underrun protection, and drop-down supports hot-dip galvanized * Axles, air tanks, front landing gear painted black * Palfinger hooklift painted black/yellow ----Information: * Errors and prior sale excepted * Vehicle is in very good / as-new condition ----Delivery Time: * Vehicle is immediately available

Condition: used, maximum load weight: 10,870 kg, overall weight: 14,400 kg, axle configuration: 2 axles, first registration: 06/2025, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2023, Equipment: ABS, KA-TA-R 14.4: ----Brakes: * Wabco ABS * Emergency release system for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem compensation unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar (up to 300 mm) with 40 mm flange drawbar eye ----Electrics / Lighting: * 15-pin electrical connector * Multi-chamber taillights ----General Attachments: * Jost mechanical landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm, mounted front right side of chassis * Bolted underrun protection * Plastic quarter mudguards * Net hooks located at each central locking bearing and two at the front wall ----Chassis: * Chassis made from fine-grain steel ----Tipper Body: * Steel pallet 3-way tipper body with continuous side walls, upper internal tube reinforcement, fold-down without centre posts, with drop side spring lift assist * Rear corner posts bolted * Combination steel wing-door rear wall, 2-leaf, asymmetrical split, can be swung and locked up to 270°, not foldable, equipped with additional swing frame for automatic rear wall opening when tipping. Locking via galvanised rotary latch at rear and central locking. Deactivation function for the automatic rear wall operation when tipping backwards with one leaf open. * 4 mm floor plate made of fine-grain steel * Rear guide rail for loading ramps ----Load Securing: Bodpfxel Th Hto Adwoww * One 5 t lashing ring fitted in each corner, plus four 3 t lashing points recessed into the outer frame on each side ----Ramps: * One pair of aluminium loading ramps, approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tyred and tracked vehicles * Lockable compartment at the rear, recessed below the loading floor in the chassis, for the ramps ----Tyres: * Tyres 285/70 R 19.5 ----Paintwork: * Chassis, drawbar, underrun protection, rear posts, rear folding supports hot-dip galvanised * Axles, springs, air tanks, and landing gear painted in black tone * Drop side panels painted in RAL 9010 pure white * Side walls paintable in any RAL colour (at extra charge) ----Info: * Reinforced structure with load securing certificate * Vehicle has a daily registration (unused) * Errors and prior sale excepted ----Delivery Time: Immediately available ex Egestorf

Condition: new, maximum load weight: 13,410 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 4,995 mm, loading space width: 2,380 mm, loading space height: 900 mm, loading space volume: 11 m³, Year of construction: 2026, * KA-TA-R 18.0 ML * Wabco EBS-E (electronic braking system with RSS) * Emergency release device for spring brake cylinders * Drum brakes * Tire pressure monitoring system with display option in the truck display via EBS signal - without truck-side installation * 2 x 9 ton BPW axles * Air suspension with level control during tipping * Drawbar with 50 mm flange coupling (adjustable by +77 mm and -33 mm via offset plate) * Jost support legs at the front * Foldable, galvanized steel underrun protection for paver loading * Closed plastic individual mudguards * Standing platform on the front wall * Mechanical tarpaulin system * 15-pin power connector * LED tail lights with galvanized protective cover * 2 LED reversing lights * Chassis made of fine-grained steel * Steel 3-sided tipper body (side walls with MM profile - continuous without center rail - pivoting via manual central locking, and foldable on the left with a side board spring lifter) * Tarpaulin system similar to RAL 7038 agate grey, with tarpaulin tensioning by means of ratchet straps on the sides and tensioning straps at the front and rear * Front wall platform made of grating with access step on the drawbar and a handrail on the front wall * Rear wall - made of HBW 400 steel - pivoting via automatic 2-claw locking system * 5 mm steel floor made of HBW 450 steel * 4 x 3 ton lashing eyes on each side, recessed and foldable - embedded in the steel floor * Reinforced and certified body according to EN 12642 XL incl. load securing certificate up to 19 tons * Painting of the side boards in a RAL color of your choice (but no special or metallic paint) can be changed up to approx. 6 weeks before completion * Axles, air tanks, support legs, flange coupling painted in a black tone * Chassis, underrun protection, and drawbar hot-dip galvanized Bwodpfxjxl Nkgs Adwew * New vehicle with full manufacturer warranty * Errors and prior sale subject to change * Available from approx. week 03/2027

Condition: new, maximum load weight: 8,600 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * KA-TA-R 11.9 Masterline: ----Brakes: * Wabco EBS * Emergency release system for spring brake cylinders * Drum brakes ----Axle: * 2 x 5.5 ton BPW axles ----Suspension: * Parabolic springs with tandem equalizer ----Drawbar / Flange coupling: * Height-adjustable, hot-dip galvanized drawbar by 300 mm with a 40 mm flange coupling ----Electrical system / Lighting: * TPMS tire pressure monitoring system * LED lighting * 15-pole electrical connector ----General components: Bsdov Dz N Aopfx Adwjww * Tool box made of galvanized sheet steel on the right side * Bolted underrun protection * Plastic quarter fenders * Jost mechanical front support legs * 2 mechanical, hot-dip galvanized folding support legs at the rear ----Tipping bridge: * Net hooks on the side and at the rear in the bearings of the central locking system, as well as 3 pieces on the outside of the front wall * Hot-dip galvanized chassis * Steel 3-sided tipping body * Continuous side walls without a center rail, foldable with side board spring supports * Folding tailgate and pivoting over a manual central locking system * Hot-dip galvanized, bolted rear rail * 4 mm steel sheet floor * Mounting rail at the rear for loading ramps ----Load securing: * 1 x 5 ton recessed and foldable lashing points in each corner * As well as 4 x 3 ton lashing points on each side, recessed in the outer frame and foldable ----Ramps: * 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 tons / pair) suitable for vehicles with rubber tires and tracked vehicles * Lockable storage compartment at the rear under the loading area, integrated into the chassis ----Tires: * Tires 235/75 R 17.5 ----Painting: * Axles, springs, air tanks, drawbar and support legs painted in a black tone * Side board painted in RAL 9010 pure white * Painting of the side walls in an RAL color possible at an extra charge * Floor and front wall hot-dip galvanized ----Information: * Body reinforced with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Errors and prior sale reserved ----Delivery time: * Available from approximately week 45/2026

Condition: new, maximum load weight: 8,780 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2024, * KA-TA-R 11.9 Masterline: ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 2 x 5.5 tons BPW axles ----Suspension: * Parabolic springs with tandem equalizing unit ----Drawbar / Flange Coupling: * Height-adjustable, hot-dip galvanized drawbar by 300 mm with a 40 mm flange coupling ----General Components: * Jost mechanical front support leg * 2 mechanical, hot-dip galvanized folding support legs at the rear * Tool box made of galvanized sheet steel on the right side * Plastic quarter fenders ----Electrical System / Lighting: * TPMS tire pressure monitoring system * 15-pole electrical connector * Bolted under-ride guard with LED rear lights ----Tipping Bridge: Bwsdpspk D D Ujfx Adwew * Net hooks on the side and rear in the bearings of the central locking system, as well as 3 pieces on the outside of the front wall * Hot-dip galvanized chassis * Steel pallet 3-sided tipping body, fully galvanized * Continuous side walls without a center beam, foldable with side board spring supports * Foldable and pivoting tailgate via manual central locking * Hot-dip galvanized, bolted rear beam ----Load Securing: * 1 x 5-ton recessed and foldable lashing point in each corner, and 4 x 3-ton lashing points on each side, embedded in the outer frame and foldable * 4 mm steel sheet floor, mounting rail at the rear for loading ramps ----Ramps: * 1 pair of aluminum loading ramps, approx. 3,570 x 400 mm (load capacity 8 tons / pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment at the rear, located under the loading area and embedded in the chassis ----Tires: * Tires 235/75 R 17.5 ----Painting: * Axles, springs, air tanks, drawbar, and support legs painted in a black tone * Vehicle is hot-dip galvanized ----Information: * Body reinforced with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Errors and prior sale subject to change ----Delivery Time: * Available from approximately week 47/2026

Condition: used, maximum load weight: 13,450 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2014, next inspection (TÜV): 05/2027, loading space length: 4,950 mm, loading space width: 2,370 mm, loading space height: 900 mm, loading space volume: 10 m³, Equipment: ABS, * 3-way tipper with side tipper system * Gigant axles * Drum brakes * ABS * Air suspension * Support legs All information is subject to change without notice / subject to prior sale. Bwodpozkfgujfx Adwjw

Condition: used, maximum load weight: 7,400 kg, overall weight: 11,000 kg, axle configuration: 2 axles, first registration: 07/2000, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 400 mm, Year of construction: 2000, Equipment: ABS, Stock No. 5884 Approx. 5.00m Müller-Mitteltal 2-sided tandem tipping trailer with folding ramps ----* Manufacturer: Müller-Mitteltal * Type: ETK-TA-S * First registration: 07/2000 * Gross vehicle weight: 11,000 kg * Unladen weight according to vehicle registration document: 3,600 kg * Payload: 7,400 kg * Axles: 2 x BPW / drum brakes * Suspension: leaf spring suspension * Tires: 235/75 R 17.5 approx. 50% remaining * Color: Chassis grey, tipping body red * ABS * Internal dimensions of tipping body: approx. 5.00m long x 2.42m wide, side walls 0.40m high * Mechanical, 2-part ramps (2.10m + 1.30m = 3.40m) * Steel floor with 4 pairs of folding lashing eyes * 40 mm drawbar, height-adjustable * Quarter fenders, 2nd axle * Spare wheel holder * LED reversing lights * 2 x LED work lights, front * Full-load support, front * Additional supports, rear German trailer!! German documents!! Bwodpoz A Nwfefx Adwew Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, occasional errors may have crept into the text or the information provided. We assume no liability for errors, changes, or interim sales. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: new, maximum load weight: 8,410 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2025, * KA - TA - R 11.9 ----Braking System: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (300 mm range) with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with in-cab display via EBS signal – no installation required on the truck side * 15-pin power connector * LED lighting system, 12/24 V * 2 LED reversing lights at the rear (activated via reverse gear) ----General Attachments: * Mechanical BPW landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox, approx. 750 x 350 x 300 mm, mounted on the right side of the chassis at the front * Bolt-on underrun protection * Plastic quarter mudguards * Two-step access in front of the bulkhead, driver’s side ----Chassis: * Chassis made of fine-grain steel ----Tipping Body: * Net hooks at each central locking bearing and two on the bulkhead * Steel palletised 3-way tipper body with reinforced 600 mm heavy-duty drop sides * Continuous top side walls with internal tube reinforcement – no central stanchions – foldable with drop side spring assist * Rear stanchions bolted * Combination steel double-wing rear doors, asymmetrically split, swivel 270° and lockable (not foldable) with additional swing frame for automatic tailgate opening during tipping * Locking via galvanized rotary bar lock at the rear and central locking * Deactivation function for automatic tailgate during reverse tipping with opened wing doors * Mounting rail at the rear for loading ramps ----Load Securing: * 1 x 5 t lashing point in each corner and 4 x 3 t lashing eyes recessed in the side outer frame * 4 mm floor plate made of S 420 MC 4 fine-grain steel Bwsdpexf Skvsfx Adwsw ----Ramps: * 1 pair of aluminum loading ramps (approx. 3,310 x 400 x 105 mm, load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area at the rear of the chassis ----Paintwork: * Chassis, drawbar, tipper body, bulkhead, underrun protection, rear stanchions, rear folding supports, and access step galvanized * Side walls and tailgate painted in RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in a shade of black ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex works Egestorf