Trailer with working platform

MÜLLER-MITTELTAL T3 Profi 30,0 Neu, Baggerstielablage, hydr. Ramp

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 ton BPW Eco axles * Parabolic springs * Mechanical axle compensation at the rear * Side impact protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front axle with closed plastic fenders, and rear axle with straight, galvanized steel splash guards, each with splash protection * Reflective contour striping on the sides and rear * Folding cover (hot-dip galvanized) for the tool box in the turntable platform * Multi-voltage system * LED tail lights * Rotating beacon (removable) at the rear * Drawbar with 40 mm drawbar eye and height adjustment via coil spring & tension lock * 15-pole electrical connector * 4 lashing pockets on each side (however, no lashing bars are included) with simultaneous lashing capability Knodpfx Ahsl Th Adeqeb * La-Si package consisting of: 2 lashing eyes (6.4 tons) at the front left & right on the main frame of the turntable platform, 5 pairs of pivoting and lowering UVV lashing rings, loadable in all directions and embedded in the outer frame - 13.4 tons in the corners, otherwise 10 tons. * 6 pairs of mechanical folding outriggers for a total width of 3 m (however, not in the rear slope) * Extension boards placed in the center of the loading area * Excavator arm rest over the rear axle up to the end beam, approx. 2,100 mm long (2 pairs of 6.4 ton lashing rings on the side in the excavator arm rest) * Hydraulically operated, single-piece loading ramps (approx. 3,000 x 720 mm) * 4-way control block for later retrofitting of hydraulic ramp shifting * Mechanical lateral ramp shifting * Loading area above the turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach angle) * Chassis, turntable, drawbar, and loading ramps are hot-dip galvanized * Axles, springs, air tanks, etc. are painted in a black tone * 235/75 R 17.5 twin tires * 5,900 kg tare weight * --technically possible gross weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale are subject to change * Available from approximately week 44/2026

Condition: excellent (used), functionality: fully functional, mileage: 580,000 km, first registration: 12/2002, fuel type: diesel, maximum load weight: 6,800 kg, overall weight: 15,000 kg, axle configuration: 2 axles, wheelbase: 3,690 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 8, emission class: euro1, suspension: steel-air, number of seats: 2, loading space length: 4,300 mm, loading space width: 2,500 mm, Equipment: air conditioning, crane, differential lock, IVECO 150E23 THREE-WAY TIPPER WITH BONFIGLIOLI CRANE CODE: 12337 HORSEPOWER: 230 YEAR: 2002 MILEAGE: 580,000 km Kodpfsy Icllex Ahqonb EURO 2 WHEELBASE: 3690 mm 8-SPEED MANUAL TRANSMISSION REAR AIR SUSPENSION DIFFERENTIAL LOCK THREE-WAY TIPPER BODY DIMENSIONS: 4.30 x 2.50 m SIDE PANELS: 60 cm HIGH, SPLIT IN 2 SECTIONS BONFIGLIOLI SERIES 10 CRANE, MODEL 10024, WITH 4 HYDRAULIC EXTENSIONS PAYLOAD CAPACITY: 6,800 kg DIFFERENTIAL LOCK AIR CONDITIONING CAB WITH REAR WINDOW EXTERNAL SUN VISOR AIR SUSPENDED DRIVER'S SEAT For more details, visit our website vanzetto.it Vanzetto Industrial Vehicles Via Rovigana, 47/G 35043 Monselice (PD) Contact: Umberto Vanzetto We offer: TRUCKS, LORRIES, IVECO, MERCEDES, VOLVO, RENAULT, DAF, MAN, SCANIA, FIAT, DAILY, EUROCARGO, STRALIS, TRAKKER, TIPPERS, HOOKLOADERS, CURTAIN-SIDED, TARPAULIN, BOX VANS, REFRIGERATED VANS, INSULATED VANS, FIXED BODY, TRACTORS, TRAILERS, RIGID TRUCKS, CAR TRANSPORTERS, FLATBEDS, CHASSIS, used vehicles, Italy, Monselice, Solesino, Padova, EQUIPMENT TRANSPORTERS, FLATBEDS, VEHICLE TRANSPORT, TRACTOR TRANSPORT, ROADSIDE ASSISTANCE, Veneto, FOR SALE, industrial commercial vehicles for sale. BREAKDOWN TRUCKS / FLATBEDS / LOWLOADERS / MACHINE TRANSPORT.

Condition: used, mileage: 1,327,139 km, first registration: 05/2011, fuel type: diesel, tire size: 315/70R22.5, tire condition: 25 %, axle configuration: 4x2, wheelbase: 3,700 mm, fuel: diesel, gearing type: automatic, number of gears: 12, emission class: euro5, suspension: steel-air, Year of construction: 2011, Equipment: air conditioning, spoiler, = Additional options and accessories = - Digital tachograph - Radio/CD player - Visor Kodpfsux Hwxsx Ahqonb = More information = Tyre profile: 25% Front axle: Tyre size: 315/70R22.5; Steering; Suspension: leaf suspension Rear axle: Suspension: air suspension Engine capacity: 12.882 cc Empty weight: 8.380 kg Carrying capacity: 9.620 kg GVW: 18.000 kg Fifth wheel height: 1,2 m = Dealer information = Please mention always the stocknumber by your demands ( 8 digits) Buying with Smz-Smeets & Zonen : - since 1976 in business : trustable company/selling17000 units yearly/65.000 units sold; 1000 on stock. - service A-Z worldwide, Top loadings for cheaper transport. Worldwide shipping- transit plates (not included) - selling all new + used parts tyres, oils : We advertise with our lowest prices. Check to see our complete stock and specials we are located on a 130.000m2 , 20.000m2 storage,work and bodyshop fully equiped. See our company video:

Condition: used, Year of construction: 2020, operating hours: 521 h, Internal vehicle number: VTC30048 Available immediately. More information at: Luis Lucena Viktoria Sologubova Manitou MHT 10180 heavy-duty telehandler – 18-tonne lifting capacity – 521 operating hours High-performance Manitou MHT 10180 heavy-duty telehandler, manufactured in 2020, with just 521 operating hours. The machine offers a maximum lifting capacity of 18,000 kg, a lifting height of 9.63 m, and is equipped with a hydraulically adjustable fork carriage and pallet forks. Technical data: * Vehicle number: VTC30048 * Vehicle condition: Used machine * Category: Telehandler * Manufacturer: Manitou * Model: MHT 10180 * Series: 129M ST4 S1 * Year of manufacture: 01/2020 * Model year: 2020 * Operating hours: 521 hours * Maximum lifting capacity: 18,000 kg * Maximum lifting height: 9.63 m * Maximum reach: 5.56 m * Unladen weight with standard forks: 24,000 kg * Technical inspection: New * CE marking: Present Engine and drive: * Engine manufacturer: Mercedes-Benz Knsdeza Nq Repfx Ahqjb * Engine type: OM 934 LA * Emission stage: Stage IV/Tier 4 Final * Cylinders: 4 * Displacement: 5,100 cm³ * Power: 129 kW (176 hp) * Maximum torque: 750 Nm at 1,600 rpm * Transmission: Hydrostatic * Forward/reverse gears: 2/2 * Maximum travel speed: 25 km/h * Traction force under load: 15,970 daN * All-wheel drive * All-wheel steering * Automatic negative parking brake * Hydraulic service brake Hydraulic system: * Variable hydraulic pump * Hydraulic flow rate: 205 l/min * Hydraulic pressure: 350 bar * Hydraulic oil tank: 290 liters * Hydraulically adjustable fork carriage Dimensions: * Overall length with implement carriage: 6.65 m * Overall width: 2.52 m * Overall height: 3.00 m * Wheelbase: 3.75 m * Ground clearance: 0.44 m * Turning radius (outer radius): approx. 5.50 m * Tilt angle: 12° * Dump angle: 105° Capacities: * Fuel tank: 315 liters * AdBlue tank: 63 liters * Hydraulic oil: 290 liters * Engine oil: 21 liters Cab and safety: Enclosed ROPS/FOPS cab, Level 2 Safety system according to EN 15000 JSM joystick control All-wheel steering Rotating beacon Work lights Cab protection grille Large-dimensioned off-road tires Noise level at the driver's seat: 80 dB(A) External noise level: 107 dB(A) Attachment: * Manufacturer: Manitou * Type: PFF + POS + DL * Serial number: 53010702 * Year of manufacture: 2019 * Self-weight: 1,900 kg * Rated lifting capacity: 14,000 kg * Load center: 1,200 mm * Hydraulically adjustable fork carriage * Pallet forks included Inspection and functional test possible by prior arrangement. Further information, photos, load charts, and videos are available upon request. Errors, changes, and prior sale reserved.

Condition: used, mileage: 562,000 km, power: 368 kW (500.34 HP), first registration: 05/2008, fuel type: diesel, axle configuration: 6x4, fuel: diesel, brakes: retarder, color: red, gearing type: automatic, emission class: euro5, loading space width: 2,400 mm, loading space height: 1,000 mm, Year of construction: 2008, Equipment: ABS, EBS, air conditioning, cruise control, retarder, trailer coupling, = Additional options and accessories = - Climate control - Intarder - Sunroof Kjdpfx Asxxyn Njhqonb = More information = GVW: 26.000 kg Selling price: € 28.600, US$ 32.990 Purchase on credit is possible: Yes

Condition: used, Year of construction: 1961, power: 38 kW (51.67 HP), fuel type: diesel, Three-point / rear hitch, two-wheeled_____Fully functionalProof of ownership (purchase agreement), Storage location: 17094 Pragsdorf Knodpev Ddznsfx Ahqeb

Condition: used, functionality: fully functional, mileage: 352,398 km, Year of construction: 2020, Iveco Trakker 500 8x4 truck, 500 hp, Euro 6 ZF 16-speed manual transmission Knodpfx Aezrwz Hohqob Air conditioning, power windows, radio Becchetti Ninja rear tipper body Registration number *6674* Body manufacturing year: 2020 Round tipper body Rear tilting tailgate Lifting mechanism with front telescopic cylinder Electric roll-over cover GVW 40 tons Tires: 1. 30% 2. 30% 3. 30% 4. 30% Mileage: 352,398 km First registration: 22-06-2020

Condition: good (used), functionality: fully functional, fuel type: diesel, axle configuration: 4x4, number of seats: 1, Year of construction: 2013, operating hours: 2,000 h, Equipment: all wheel drive, trailer coupling, Thwaites Dumper Kjdjr H Df Sjpfx Ahqjnb Type: Mach Year of manufacture: 2013 Approx. 2000 hours 3-tonner Rotating dump truck Sale only to commercial and export customers. Errors and omissions excepted. The offer price refers to the net price.

Condition: excellent (used), functionality: fully functional, empty load weight: 9,800 kg, maximum load weight: 30,200 kg, overall weight: 40,000 kg, axle configuration: 3 axles, first registration: 07/2022, next inspection (TÜV): 02/2026, loading space length: 13,800 mm, loading space width: 2,550 mm, loading space height: 870 mm, total length: 13,700 mm, suspension: air, tire size: 245.70 R 17.5, color: red, trailer brake: trailer braked, Year of construction: 2022, Equipment: ABS, tail-lift, Used Komodo low loader semi-trailer with ramps, year 2022, 3 axles with lowered gooseneck platform, 1st axle liftable and 3rd steering, EBS, 10m low deck with ground clearance 87cm, double grating ramps 4.0m long, width adjustable, side extensions, RUD side and floor hooks 8t, removable side boards on neck, air suspension, deck in wood and steel, side toolbox, large neck box, dual speed landing legs, excellent condition, inspected until 28.02.2026 – DEALER INTERDRIVE SRL-PARMA Kedpfx Aoyfwdishqonb

Condition: new, functionality: fully functional, Year of construction: 2025, container length: 23 ft, color: grey, overall weight: 1,500 kg, maximum load weight: 1,500 kg, empty load weight: 1,500 kg, loading space volume: 38 m³, loading space width: 2,400 mm, loading space length: 6,000 mm, loading space height: 2,500 mm, machine/vehicle number: Bürocontainer Modell GRAU-1, Living Container | Office Container | Site Container | Model GREY-1 | 240 × 600 cm High-quality & Flexible Space Solution Our immediately available containers can be viewed and collected directly from our warehouse. The office and living containers offer an ideal solution for a wide range of applications – featuring high quality, maximum flexibility, and short delivery times. Technical Details Dimensions: • Width: 240 cm • Length: 600 cm • Height: 250 cm Knodexcgxijpfx Ahqjb Insulation • Ceiling/Walls: 50 mm PUR (Polyurethane) • Optional: 100 mm insulation (PUR, PIR or mineral wool) • Floor: 16 mm fibre cement board + PVC covering Features & Quality • 1x room • 1x glass door • 3x fixed-glazed window areas • Premium window and glazing systems by REHAU for optimal thermal insulation and durability Colours • Façade: RAL 7040 • Frame: RAL 7016 Customization Custom adaptations and special designs are always possible to meet customer requirements. Stock & Delivery • In-stock: Same-day dispatch possible • Not in stock: Production time depending on model approx. 2–4 weeks • Worldwide shipping: Reliable and professional delivery to all countries Further Options • Custom dimensions on request • Extendable equipment available as required 📍 Showroom: Im Mannenberg 9a, 53557 Bad Hönningen If you have any further questions or wish to receive a customised quote, we are always happy to assist you.