Low loader trailer

MÜLLER-MITTELTAL 19 to. Tandemtieflader mit Auffahrrampen

Condition: new, maximum load weight: 14,550 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2024, * ETÜ-TA-R 19.0: * Wabco EBS-E (electronic braking system) * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11-tonne Gigant axles * Air suspension * Drawbar with 50 mm flanged towing eye and height-adjustable drawbar * Jost support winch at the front * External foldable support legs at the rear * Toolbox made of galvanized steel sheet approx. 650 x 350 x 320 mm, mounted on the right side (black powder-coated) * Side underride protection * Plastic quarter mudguards * 15-pin electrical connector * LED tail lights * Reinforcement package for drill rig transport on chassis - loading height + 20 mm * 50 mm softwood flooring in clamped design * Fixture in front of headboard for retrofitting container locks * Bolted headboard made from smooth sheet metal * Drop-down side panels made from trapezoidal-profile steel with board side spring assist * Rear steel panel can be slid between the ramps - storage bracket inside in front of the headboard when not in use * Rear stanchions bolted * Perforated outer frame approx. 45 degrees bent with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * In the front and rear corners 1 x 10 t lashing point each; various holes for 1.2 t lashing points in the front and rear carrier * One-piece mechanical grating loading ramps with spring system for single-person operation approx. 2,750 x 620 mm (can be collapsed down to 20 mm) * Rear approach angle approx. 860 mm * Chassis, drawbar, headboard, tailgate, rear foldable supports, and ramps hot-dip galvanized * Axles, springs, air tank, and support winch painted black * Wheelbase: 1,310 mm Hfjdpfxepk D Nce Af Sjc * Tires: 235/75R17.5 * Side panel painting in RAL 9010 pure white * Side wall painting in any RAL color available at extra charge * New vehicle with manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Condition: new, empty load weight: 4,580 kg, maximum load weight: 14,420 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 5,700 mm, loading space width: 2,420 mm, loading space height: 1,100 mm, loading space volume: 15 m³, suspension: other, tire size: 435/50 R 19,5, color: other, gearing type: other, front tire size: 435/50 R 19,5, rear tire size: 435/50 R 19,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Three-way tipper, loading area approx. 5,700 mm x 2,420 mm, 600 mm drop sides + 500 mm extension drop sides, hot-dip galvanized drop sides, loading height approx. 1.080 mm, 12 x lashing eyes in the floor, reinforced gear support winch with load and fast gear at the front, 2 times folding supports at the rear, 435/50 R 19.5, , Chassis and tipper body hot-dip galvanized, , Surcharge for:, Aluminium ramps , Price: 1,600 Euro, , -- Misprints, errors and omissions excepted, Sample pictures --, More data under: !, More Details: ! Hedpfxjyf Df Hs Af Sjfc

Condition: new, maximum load weight: 14,550 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2024, * ETÜ-TA-R 19.0: * Wabco EBS-E (electronic braking system) * RDÜ (tire pressure monitoring) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 11 tonnes Gigant axles * Air suspension, drawbar with 50 mm flanged drawbar eye and height-adjustable drawbar * Jost landing gear at the front * External folding supports at the rear * Toolbox made of galvanized sheet steel, approx. 650 x 350 x 320 mm, on the right side (powder-coated in black) * Side impact protection * Plastic quarter fender * 15-pin power connector * LED taillights * Reinforcement package for drilling rig transport on the chassis - loading height + 20 mm * 50 mm clamped softwood floor * Device for retrofitting container locks in front of the bulkhead * Bolted bulkhead made of smooth sheet steel * Trapezoidal profiled sheet steel side walls, foldable with side wall spring jack * Steel rear wall retractable between the ramps - bracket inside in front of the bulkhead when not in use * Bolted rear stanchions * Perforated Outer frame angled at approximately 45 degrees with a 2-ton lashing capacity every 480 mm * Installation of 3-ton drop lashing brackets possible every 600 mm * 1 x 10-ton lashing ring in each of the front and rear corners, various holes in the front and end beams for 1.2-ton lashing capacity * One-piece mechanical Grating loading ramps with spring mechanism for one-person operation, approx. 2,750 x 620 mm (can be collapsed to within 20 mm) * Rear approach slope approx. 860 mm * Chassis, drawbar, bulkhead, tailgate, rear folding supports, and loading ramps hot-dip galvanized * Axles, springs, air chamber, and landing gear painted in a single black tone * Wheelbase: 1,310 mm * Tires: 235/75R17.5 * Side walls painted in RAL 9010 pure white Hfedpfxjpk D D Hs Af Soc * Side walls painted in a single RAL color available for an additional charge * New vehicle with manufacturer's warranty * Errors and prior sale subject to change * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 14,500 kg, overall weight: 1,900 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,460 mm, loading space height: 870 mm, suspension: air, tire size: 235/75 r17,5, Equipment: ABS, tail-lift, trailer coupling, HUMBAUR 19 to tandem low loader drive-over with rear bevel and folding steel ramps, Typ. HBTZ 197224 BS --- INCLUDING SAF air suspension with lifting/lowering valve INCLUDING HOT-DIP GALVANIZED CHASSIS/ DRAWBAR INCLUSIVE galvanized steel bulkhead 400 mm high, pluggable INCLUSIVE anodized aluminium drop sides 400 mm incl. galvanized central stanchions Equipment: * Total weight 19 tons (2x9 tons axle load and 1 ton drawbar load) Hjdpekn N Siefx Af Ssfc * Payload approx. 14.5 tons (without BW superstructure) * 7,200 mm long loading area incl. rear slope * Loading height with unloaded vehicle approx. 870 mm * Steel bulkhead 400 mm high, pluggable * 400 mm anodized aluminium drop sides incl. galvanized central stanchions * Overall dimensions: LxWxH approx. 9,380 x 2,550 x 3,700 mm * Loading area slanted at the rear * Drive-on ramps with wooden decking, can be moved sideways * Steel ramps approx. 3,100 x 760 mm with spring lifting mechanism * Drive-on angle only approx. 11° * Low loader axles from SAF with closed S-cam brakes * Air suspension with lifting/lowering function * EBS brake system with stability program in accordance with ECE directive * Spring-loaded parking brake * Twin tires 235/75R17.5" * Galvanized drawbar, with DIN screw-in drawbar eye Ø 50 mm, infinitely adjustable via reinforced height adjustment * Coupling height approx. 750 - 1,000 mm * Reinforced 12 t geared support winch with load and fast gear * 8 10 t lashing rings recessed * 16 2 t drop lashing brackets can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * Chassis, ramps and steel bulkhead hot-dip galvanized * Bridge floor with wooden decking and STEEL tear plate over the wheels * Mudguards with anti-spray system * 2 wheel chocks with holder * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Optimum corrosion protection thanks to hot-dip galvanizing * Safe loading and unloading thanks to telescopic folding supports at the rear * Simple and easy handling of the steel access ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload --- Optional * Hydraulic ramp hoist ∗Storage vehicle - promptly available ∗Subject to prior sale ∗Price ex works