Working platform semitrailer

MÜLLER-MITTELTAL 3- achs Satteltiefl.-Luft-Lenk-hydr. Auffahrram.

Condition: new, maximum load weight: 38,290 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 8,500 mm, loading space width: 2,520 mm, Year of construction: 2025, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle is self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering system as well as RtR (Raise-the-Roof) valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as an info tool, with pressure sensors for total axle load display * 15-pin power plug * LED lighting system 12 / 24V * Removable LED beacon at the rear left ----General Fittings: * Side underrun protection * Support winches at the front and mechanical swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder under the chassis on the right side ----Lowbed Area: * Saddle platform with 45° chamfered front corners and front toolbox made from galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm, with hinged lid * 400 mm aluminium drop sides (RAL 9010 pure white) on the sides of the saddle platform, foldable and removable * Rear wall inserted, 150 mm high * Rear incline on the saddle platform to the lowbed, approx. 700 mm long * Saddle platform with 50 mm timber planks and lowbed platform with 60 mm timber planks * Tread plate above the axles ----Extensions: * 8 x mechanical fold-out extensions up to a total width of 3 m, not on the rear incline (extension planks available and stored on the saddle platform) * Mechanically adjustable warning sign packages front and rear ----Load Securing (Lashing Package): * On the saddle platform: 2 x 6.3 t lashing rings each, as well as 3 x 5 t lashing rods on each side of the external frame * On the lowbed platform: 2 x 13.4 t lashing rings on each side, as well as 4 x 10 t lashing rings, swingable and lowerable, embedded in the external frame * On each side: 2 x 6.4 t lashing eyes, and 1 lashing ring at the excavator stick recess at the rear * 2 x container locks directly after the step in the lowbed platform ----Excavator Stick Recess: * Excavator stick recess from the end of the last fixed axle, over the steering axle, up to the rear cross member, continuous with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Access Ramps: * Mechanical one-piece, hot-dip galvanized hydraulic access ramps approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for future customer installation of hydraulic ramp shifting * The outer board of the ramp consists of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach incline ----Hydraulics: * Hydraulic flow divider in the trailer (for truck hydraulic pump capacity from over 40 l/min up to 120 l/min) ----Load Dimensions: * Loading surface of the saddle platform: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm approach incline) ----Fifth Wheel Height: * approx. 1,220 mm (suitable for 2- and 3-axle tractors) ----Paintwork: * Chassis, ramps, rear folding supports, widening adapters hot-dip galvanized * Axles, support winches, air tanks painted black * Vehicle is hot-dip galvanized Hnsdpfxjl Tnvgo Af Sjh ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images may show equipment not included in the offered vehicle ----Delivery Time: * Available from week

Condition: used, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 09/2017, * SAF axles * Wheel recesses * Hydraulic loading ramps, width adjustable * Air suspension * Extendable * Unladen weight: 11,020 kg -----Internal vehicle number: 11010----Subject to errors and prior sale. WhatsApp support available! Hnsdpfx Afswta Ale Soh If you have questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp. WhatsApp: German, English -- WhatsApp: German, English, Arabic

Condition: new, maximum load weight: 38,000 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 12,180 mm, loading space width: 3,000 mm, loading space height: 890 mm, suspension: air, Equipment: ABS, HUMBAUR 3-axle low loader semi-trailer with offset loading area, Typ. HTS30K-V44+ --- INCLUSIVE lift axle INCLUSIVE self-steering axle with SAF air suspension INCLUSIVE 3-meter package INCLUSIVE stowage box under cargo bed INCLUSIVE TIM/WABCO Smart Board for axle load display INCLUSIVE Hot-dip galvanized chassis INCLUSIVE ALU drop sides and stowage box to the semi-trailer platform INCLUSIVE stake pockets and lashing ring package INCLUSIVE excavator trough Equipment: V44+ * Gross vehicle weight 48,000 kg * Payload approx. 38,000 kg * Chassis frame and ramps hot-dip galvanized * SAF air suspension unit including lifting and lowering * INCLUSIVE hot-dip galvanized chassis * Lift axle with starting aid and self-steering axle * EBS electronic braking system * WABCO Smart Board for axle load display * LED lighting system * Loading height approx. 890 mm * Saddle height: approx. 1,230 mm * 235/75R17.5 tires - 12-ply * Drop deck length approx. 8,680 mm incl. slope * Saddle platform length approx. 3,500 mm incl. slope * Excavator trough * 2" kingpin can be offset by 340 mm for 2+3-axle SPM * Gooseneck with 400 mm bulkhead * 400 mm folding aluminum side wall + storage box with lid * Ramp rail at the offset to the gooseneck * 3 pairs of lashing rings 6 tons sunk into the raised bed * 3 pairs of lashing points 3 tons in the bunk bed outer frame * 5 pairs of lashing rings 10 to. recessed in the low bed * 3 pairs of lashing eyes 6 to. screwed to the outer frame * 3 pairs of stake pockets in the outer frame of the high bed * 5 pairs of stanchion pockets in the low bed outer frame * 3-meter widening package with folding boom, wooden planks * Sheet steel toolbox under the cargo bed, lockable, mounted on the side under the cargo bed as a storage compartment for wooden planks * Warning package with lighting * Rotating beacon at the rear * 1-section ramps approx. 3150 x 750 mm - drive-on angle approx. 10° Hnsdpfskn N S Usx Af Soh * Softwood flooring on ramps, low loading & semi-trailer platform * Spring lifting gear to the ramps * COC papers * 48,000 kg GVW only with special permit according to §70 * Climbing rails on the ramp slope * Brake connection: red/yellow * Electrical system: 3-way socket with 2x7-pin socket (1 x ISO 1185 / 1x ISO 3731, 24 V-N/24 V-S) and 15-pin socket ISO 12098 --- Example pictures - equipment may vary ! ∗Stock vehicle - promptly available ∗Subsequent sale reserved ∗Price ex works

Condition: used, maximum load weight: 37,800 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 01/2023, Vehicle description with air suspension, 2-piece ramps and trailing axle STN-L gooseneck - 45-degree beveled design - Equipped loading area 3,800 x 2,480 mm - Fifth wheel plate with replaceable 2" kingpin (drawbar kingpin 50) - Mechanical landing legs - Steering radius 2,500 mm - Working slope 900 mm Chassis - 3-axle air-suspended chassis, wheelbase 1,310 mm - SAF axles consisting of two fixed axles and two friction steered stub axles - Axles with adjustable tapered roller bearings and automatic slack adjusters (AGS) - Raise and lower valve Rear of vehicle - Tapered 1,000 mm Braking system - 2-line all-wheel air pressure brake system with diaphragm brake cylinders - Automatic load-dependent brake (ALB) - Automatic slack adjusters (AGS) - Parking brake via spring accumulator cylinders - Anti-lock braking system (ABS) - 2-piece loading ramps (2,950 + 1,700 x 700 mm) incl. hydraulic lifting mechanism - Folding rear support - Hydraulic ramp adjustment - Electro-hydraulic power pack - Extendable widening sections including insert boards within the loading area, allowing loading width to be increased to 3,000 mm Technical specifications Gooseneck Loading area (L x W): 3,880 x 2,480 mm Loaded fifth wheel height: 1,250 mm Loading area Loading area (L x W): 9,300 x 2,550 mm Loaded loading height approx. 860 mm (+145/-55 mm) Steering Hnedjxwhi Sepfx Af Ssh 1st and 2nd axles rigid 3rd axle steering (trailing axle) Electro-hydraulic power pack