Used Müller-Mitteltal Lowbed Semitrailers for sale (268)

Condition: new, maximum load weight: 14,660 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, ETÜ-TA-R 19.0: ----Brakes: * Wabco EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10-ton BPW Eco axles ----Suspension: * Parabolic springs - 110 mm wide - with tandem equalizer ----Drawbar / Flange coupling: Crsdpel Th Hlsfx Ak Tog * Drawbar with 50 mm flange coupling and height-adjustable drawbar ----Electrical system / Lighting: * 15-pin power connector * LED tail lights * TPMS (Tire Pressure Monitoring System) ----General components: * Jost support leg at the front * Outboard folding supports at the rear * Side underrun protection * Plastic quarter fenders ----Low-loader platform: * 50 mm hardwood flooring * Mounting point in front of the front wall for subsequent installation of container locking devices * Bolted front wall made of smooth sheet metal * Steel side walls - trapezoidal profile - foldable with side rail spring lift * Steel rear wall that slides in between the ramps - holder when not in use inside the front wall * Rear crossbars bolted on ----Load securing: * Perforated outer frame angled at approx. 45 degrees with a lashing force of 2 tons every 480 mm * Installation of 3-ton drop-side lashing brackets every 600 mm possible * At the front and rear corners, 1 x 10-ton lashing point each, various holes in the front and end crossmembers for 1.2-ton lashing options * Profifix lashing rail in the longitudinal axis in the middle for lashing options up to LC 3000 daN ----Ramps: * One-piece mechanical grid ramps with spring mechanism for single-person operation, approx. 2,750 x 620 mm (can be pushed together to 20 mm) * Approach angle at the rear approx. 860 mm ----Painting: * Chassis, drawbar, front wall, rear wall, ramps, and folding supports hot-dip galvanized * Painting of the side walls in RAL 9010 pure white * Painting of the side walls in an RAL color possible for an extra charge * Axles, springs, air tank, flange coupling, and support leg painted in a black tone ----Information: * New vehicle with full manufacturer's warranty * Errors and prior sale reserved ----Delivery time: * Available for immediate delivery from Egestorf near the A7.

Condition: new, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA 18.0: * 2 in 1 = suitable for roll-off containers and as a low-loader ----Brakes: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10 ton Gigant axles ----Suspension: * Air suspension with lifting and lowering system and RTR valve Crsdpfx Ajl Tpc Ask Tjg ----Drawbar: * Drawbar 2,000 mm long with 40 mm drawbar eye and height adjustment device ----Electrical system / Lighting: * Tire pressure monitoring system with display option in the truck via EBS signal - without truck-side installation * LED rear lights 12 / 24 V * 15-pin power socket ----General components: * Toolbox made of powder-coated steel sheet, approx. 1,000 x 300 x 600 mm * Storage box for container net made of galvanized sheet, 960 x 300 x 450/400 mm * Reflective contour strip on the sides and rear * Side underrun protection * Plastic quarter fenders with splash protection * Plastic rear impact protection buffer * Foldable A-frame sign at the rear ----Loading area: * Main frame with raised outer frame for guiding the roll-off containers * Steel sheet floor with recesses for the rollers in the bogie area * Container length from 5,500 - 7,000 mm possible * Pneumatic 4-point clamping locking system and mech. plug-in stop angles at the front in the track, load securing certificate according to DIN 30722 - 1 * Welding bead as anti-slip coating in the track area of the ramp * Mech. rear support legs ----Load securing: * 1 pair of 10 ton UVV lashing rings at the front on the front wall beam * 3 pairs of 10 ton UVV lashing rings on the sides in the outer frame * 4 x 2 ton lashing eyes on each side in a cloverleaf design * 4 x 8 ton lashing brackets recessed in the outer frame ----Ramps: * 1 pair of aluminum loading ramps (10.6 tons / pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment from the rear) ----Painting: * Chassis, bogie, locking parts, rear support legs hot-dip galvanized * Drawbar, axles, air tanks painted in a black shade ----Information: * New vehicle without initial registration with full manufacturer warranty * Errors and prior sale subject to change * Sample images ----Delivery time: * Available from approximately week 43 / 2026

Condition: used, empty load weight: 2,700 kg, maximum load weight: 7,300 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 02/2007, loading space length: 5,020 mm, loading space width: 2,460 mm, loading space height: 400 mm, suspension: steel, tire size: 235/75R17.5, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, BPW axles, tandem, leaf suspension, ABS (anti-lock braking system), lashing eyes, mechan. Ramps, front support, storage box, height-adjustable drawbar Csdpfxswvikqs Ak Tjrg Body: Tandem low loader trailer with mechanical ramps 2x BPW axles, drum brakes! Loading height approx. 930mm! Ramp length approx. 2600mm! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, empty load weight: 2,910 kg, maximum load weight: 7,590 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 09/2009, next inspection (TÜV): 04/2025, loading space length: 4,500 mm, loading space width: 2,200 mm, loading space height: 450 mm, suspension: steel, tire size: 235/75R17.5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel body, 2 axles, BPW axles, tandem, leaf spring suspension, ABS (anti-lock braking system), lashing eyes, underbody protection, front support, rear support, swing flaps. Construction: Tandem 3-way tipping trailer with ramp shaft. Loading ramps available for an additional charge of €900.00 net! ACCESSORIES INFORMATION IS PROVIDED WITHOUT GUARANTEE. Subject to changes, prior sale, and errors! Crsdpev S H Sfofx Ak Tog - .

Condition: new, maximum load weight: 8,870 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-ER 11.9: ----Brakes: * Electronic braking system (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle system ----Suspension: * Parabolic springs with equalizer unit ----Drawbar / Flange Eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange eye ----General Attachments: * Jost mechanical landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Side underrun protection * Quarter fenders made of plastic * Plastic toolbox mounted front right on the bulkhead ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * 15-pin power connector * LED tail lights ----Loading Area: * 50 mm softwood floor * 20" container locks mounted at front and rear * Bolted smooth sheet bulkhead * Drop side walls made of profiled steel plate, trapezoidal, foldable with board wall spring assist * Bolted, hot-dip galvanized rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing shackles every 600 mm (5 lashing rings each side installed) * In each of the front and rear corners, 1 x 6.3 t lashing ring * Various holes in the front bulkhead and end beam for 1.2 t lashing points ----Ramps: * 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Rear storage compartment below the loading surface, integrated into the chassis ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, and rear wall * Side wall color RAL 9010 pure white * Painting of the side walls in any RAL color available at additional cost ----Information: * New vehicle, unregistered * Errors and prior sale excepted Crjdpfx Ael Tilxek Tog ----Delivery Time: * Immediately available ex Egestorf

Condition: new, maximum load weight: 14,400 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, ETÜ-TA-ER 19.0: ---- Braking System: * WabcoEBS-E (electronic braking system) * Emergency release unit for spring brake cylinders * Drum brakes ---- Axles: * 2 x 11 t Gigant axles ---- Suspension: * Air suspension with lift and lowering device ---- Drawbar / Flange Eye: * Drawbar with 50 mm flange towing eye and height adjustment of 110 mm via offset plate ---- Electrics / Lighting: * RDÜ tire monitoring system * 15-pin power connector * LED tail lights 12 / 24 volts ---- General fittings: * Jost support winch at the front * External foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards ---- Lowbed area: * Reinforcement package for drilling rig transport on the chassis * 50 mm softwood floor, clamped version * Preparation in front of bulkhead for retrofitting container locks Crsdpfxemi Tcqe Ak Tjg * Bolted smooth sheet metal bulkhead * Split side walls from trapezoidal profiled steel sheet, foldable, with central folding stanchion * Steel rear wall, retractable between ramps - holder for storage inside at front bulkhead when not in use * Bolted rear stanchions ---- Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * Load securing package: in each front and rear corner 1 x 10 t UVV-certified lashing ring, each side 2 x 8 t UVV-certified retractable lashing rings in the outer frame, various holes in front and rear crossmember for 1.2 t lashing options ---- Ramps: * One-piece slide-in ramps 12 t / pair, approx. 2,750 x 620 mm * Rear approach angle approx. 860 mm ---- Loading height: * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm ---- Tires / Wheelbase: * Wheelbase: 1,810 mm * Tires: 235/75R17.5 ---- Paintwork: * Chassis, drawbar, bulkhead, tailgate, foldable supports, and ramps hot-dip galvanized * Axles, air tanks, flange eye, and support winch painted in black * Vehicle is hot-dip galvanized ---- Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ---- Delivery time: * Immediately available ex Egestorf

Condition: used, empty load weight: 3,590 kg, maximum load weight: 10,810 kg, overall weight: 14,400 kg, axle configuration: 2 axles, first registration: 06/2020, loading space width: 5,040 mm, loading space height: 2,420 mm, suspension: steel, tire size: 285/70R19,5 150J, color: other, gearing type: other, front tire size: 285/70R19,5 150J, rear tire size: 285/70R19,5 150J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, front for through-loading, lashing eyes, surcharge for ramps: 1,000 EUR, subject to printing errors, errors and changes, sample images, more details at: ! Codezxcvcopfx Ak Terg

Condition: new, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA 18.0: * 2-in-1: Suitable for roll-off containers and as a low-loader ----Brakes: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10-ton Gigant axles ----Suspension: * Air suspension with lifting and lowering system and RTR valve ----Drawbar: * Drawbar 2,000 mm long with 40 mm drawbar eye and height adjustment ----Electrical system / Lighting: * Tire pressure monitoring system with display option in the truck via EBS signal - without truck-side installation * LED tail lights 12 / 24 V * 15-pole power connector ----General attachments: * Toolbox made of powder-coated sheet steel, approx. 1,000 x 300 x 600 mm * Storage box for container net made of galvanized sheet metal, 960 x 300 x 450/400 mm * Reflective contour strip on the sides and rear * Side underrun protection Cedpfxsl Tq Nms Ak Torg * Plastic quarter fenders with splash guards * Plastic rear impact protection buffer * Foldable A-frame sign at the rear ----Loading platform: * Main frame with raised outer frames to guide the roll-off containers * Steel sheet floor with recesses for the rollers in the bogie area * Container length of 5,500 - 7,000 mm possible * Pneumatic 4-point clamping lock and mechanical plug-in stop angles at the front in the track, load securing certificate according to DIN 30722 - 1 * Welded bead as an anti-slip surface in the track area of the ramp * Mechanical rear support legs ----Load securing: * 1 pair of 10-ton UVV lashing rings at the front on the end wall beam * 3 pairs of 10-ton UVV lashing rings on the sides in the outer frame * 4 x 2-ton lashing eyes each on the sides in a cloverleaf design * 4 x 8-ton lashing brackets embedded in the outer frame ----Ramps: * 1 pair of aluminum loading ramps (10.6 tons / pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment from the rear) ----Painting: * Chassis, bogie, locking parts, rear support legs hot-dip galvanized * but the drawbar, axles, and air tank are painted in a black tone ----Information: * New vehicle without initial registration with full manufacturer's warranty * Subject to errors and prior sale * Sample images ----Delivery time: * Available approximately from week 43 / 2026

Condition: new, maximum load weight: 10,800 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring-loaded brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Drawbar height-adjustable by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm Croderwc R Rspfx Ak Tsg ----Electrics / Lighting: * Tire pressure monitoring system with in-cab display via EBS signal (no truck-side installation required) * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Support winch at the front * External folding support legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm mounted front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood floor * Provision in front of the bulkhead for retrofitting container locks * Bolted 400 mm high smooth steel bulkhead * Bolted rear posts * Drop sides with spring assist ----Load Securing: * Perforated outer frame, approximately 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashings every 600 mm * One 6.3 t lashing ring in each front and rear corner * Various holes for 1.2 t lashing points in the front and rear crossmembers * Profifix lashing rail, centered lengthways, for lashing up to LC 3,000 daN ----Ramps: * One-piece hydraulic mesh loading ramps, approx. 2,750 x 600 mm (collapsible to 20 mm clearance) * Hydraulic flow divider installed in trailer (for hydraulic pump flow from the truck exceeding 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical folding supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, front support winch, and flange towing eye painted black * Drop side panels painted in RAL 9010 pure white * Painting of side panels in any RAL color available at extra cost ----Information: * New vehicle with manufacturer warranty * Subject to misprints and prior sale ----Delivery time: * Immediately available ex-works Egestorf

Condition: used, empty load weight: 8,850 kg, maximum load weight: 31,150 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 08/2019, suspension: steel, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Total loading platform length approx. 9,500 mm, lowbed loading platform length approx. 7,360 mm, loading height approx. 910 mm, 14 pairs of lashing eyes. Vehicle is offered on behalf of the customer. -- Subject to errors, misprints, and changes. Sample images -- More data at: !, More Details: ! Csdjzx S Tdjpfx Ak Tjrg

Condition: new, maximum load weight: 14,400 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, ETÜ-TA-ER 19.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 11 t Gigant axles ----Suspension: * Air suspension with raise/lower function ----Drawbar / Flange Eye: * Drawbar with 50 mm flange eye and height adjustment of 110 mm via offset plate ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * LED tail lights 12 / 24 volt ----General Attachments: * Jost landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted on the right side * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * Reinforcement package for drill rig transport on chassis * 50 mm softwood floor, clamped design * Fittings in front of bulkhead for subsequent installation of container locks * Bolted bulkhead of smooth sheet metal * Split side walls made of trapezoidal profiled steel sheet, foldable with central drop-in stanchion * Steel rear wall, retractable between ramps – storage bracket inside in front of bulkhead when not in use * Rear stanchions bolted ----Load Securing: * Perforated outer frame bent approx. 45 degrees with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * Load securing package: 1 x 10 t UVV lashing ring at each front and rear corner, 2 x 8 t UVV retractable lashing rings per side in the outer frame, various bores for 1.2 t lashing options in the front and rear crossmembers ----Ramps: * Single-piece slide-in ramps 12 t / pair, approx. 2,750 x 620 mm * Approach slope at rear approx. 860 mm ----Loading Height: * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm ----Tyres / Wheelbase: * Wheelbase: 1,810 mm * Tyres: 235/75R17.5 Credpfxjmi Tmae Ak Tog ----Paint Finish: * Chassis, drawbar, bulkhead, tailgate, folding supports, and ramps hot-dip galvanized * --- Axles, air tanks, flange eye, and landing gear painted in black --- * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Subject to prior sale and errors ----Delivery Time: * Immediately available ex Egestorf

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Centre axle can be lifted ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye & height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power socket * TPMS (Tire Pressure Monitoring System) ----General Fittings: * Toolbox made of powder-coated sheet steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized sheet steel (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with spray protection * Rear plastic impact protection bumpers * Mechanical drop supports at the rear ----Container / Lowbed Platform: * Hot-dip galvanized main frame with raised outer rails (approx. 25 mm higher) to guide the roll containers * Steel floor with wheel recesses in the bogie area * When transporting roll-off containers: container length from 5,500 to 7,000 mm possible * Pneumatic 4-point locking system and mechanically insertable guide angles at the front of the tracks * Load certification according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Including 8 repositionable skip stops for lateral centering of the skips, front 4 skip stops inserted with pivoting stops ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the side for attaching tension elements to secure skips by force and form closure * 4 cloverleaf-style lashing cleats per side and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld bead as anti-slip surface in the run-up area of the ramp * 1 pair of aluminium approach ramps (16 t / pair), 2,800 x 400 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment accessible from the rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape at the sides & rear * Axles, slewing ring, drawbar and air tanks painted in a shade of black * Hot-dip galvanized main frame ----Info: * Permissible gross weight technically possible: 27,000 kg * New vehicle without initial registration, with manufacturer's warranty * Errors and interim sale subject to change ----Delivery Time: * Available from approx. week 47/2026 Csdstplv Topfx Ak Terg

Condition: new, maximum load weight: 10,750 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 2 x 7-ton Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Drawbar / Flange coupling: * Drawbar with 300 mm height adjustment Credpfx Aksv D Tcbo Tjg * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange coupling ----Electrical system / Lighting: * TPMS tire pressure monitoring system * 15-pin power connector * LED lighting ----General attachments: * Support winch at the front * Outboard folding supports at the rear * Plastic tool box approx. 858 x 500 x 500 mm on the front right outside on the front panel * Lateral impact protection * Plastic quarter fenders ----Low-loader platform: * 50 mm hardwood flooring * In front of the front panel and rear slope, provision for retrofitting container locking mechanisms for the transport of 20" containers * Screwed front panel made of smooth sheet metal * Steel sheet metal side walls - trapezoidal profile - foldable in the middle, divided 1x * Steel rear wall can be slid in between the ramp brackets when not in use, inside in front of the front panel * Rear crossbeams screwed on ----Load securing: * Perforated outer frame approx. 45 degrees bent with 2-ton lashing force every 480 mm * Installation of 3-ton drop-side lashing eyes possible every 600 mm * In the corners, front and rear, 1 x 6.3-ton lashing point each * In the front and end beam, various holes for 1.2-ton lashing options * Profifix lashing rail in the longitudinal axis in the middle for lashing up to LC 3000 daN ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Approach angle at the rear approx. 860 mm chassis ----Wheelbase: * Wheelbase 1,140 ----Painting: * Drawbar, front panel, rear door, folding supports and ramps hot-dip galvanized * Axles, springs, air tanks, flange coupling and support winch painted in a black tone * Painting of the side walls in RAL - 9010 pure white ----Information: * Reinforced and certified body according to EN 12642 XL incl. load securing certificate * New vehicle with manufacturer's warranty * Errors and prior sale reserved ----Delivery time: * Immediately available from Egestorf

Condition: new, maximum load weight: 10,750 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 7-ton Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange coupling: * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange coupling ----Electrical system / Lighting: * TPMS tire pressure monitoring system * 15-pin power connector * LED lighting ----General components: * Front support jack * Outboard folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm on the front right outside of the front wall * Lateral impact protection * Plastic quarter fenders ----Low-loader platform: * 50 mm softwood flooring * In front of the front wall and rear slope, provision for the subsequent installation of container locking mechanisms for the transport of 20" containers * Bolted front wall made of smooth sheet metal * Steel sheet metal side walls - trapezoidal profile - foldable, divided in the middle 1x * Steel rear wall can be slid in between the ramp brackets when not in use, positioned inside in front of the front wall * Rear crossbars bolted on ----Load securing: * Perforated outer frame, approx. 45 degrees angled, with 2-ton lashing force every 480 mm * Installation of 3-ton chain lashing brackets possible every 600 mm * In the corners, front and rear, 1 x 6.3-ton lashing point each * Various drill holes in the front and end crossmembers for 1.2-ton lashing options * Profifix lashing rail in the longitudinal axis in the middle for lashing options up to LC 3000 daN ----Ramps: * One-piece mechanical grid grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Approach slope at the rear approx. 860 mm chassis ----Wheelbase: * Wheelbase 1,140 ----Painting: * Drawbar, front wall, tailgate, folding supports and ramps hot-dip galvanized * Axles, springs, air tanks, flange coupling and support jack painted in a black tone * Painting of the side walls in RAL 9010 pure white ----Information: * Reinforced and certified superstructure according to EN 12642 XL incl. load securing certificate * New vehicle with manufacturer's warranty Codpfx Akjv Eq Eve Tsrg * Errors and prior sale reserved ----Delivery time: * Immediately available from Egestorf

Condition: used, empty load weight: 7,340 kg, maximum load weight: 22,660 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 05/2012, loading space length: 9,200 mm, suspension: steel, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length approx. 9,200 mm, loading height approx. 900 mm, 16 x lashing eyes, , Vehicle is sold on order , , , -- Subject to misprints, errors and alterations, sample pictures --, More data under: !, More Details: ! Csdpozx S T Rjfx Ak Terg

Condition: new, maximum load weight: 10,660 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2026, * KA-TA-R 14.4: ----Brakes: * Wabco EBS (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 2 x 7-ton Gigant axles ----Suspension: * Parabolic springs with tandem equalizer ----Drawbar / Flange coupling: * Height-adjustable drawbar by 300 mm with 40 mm flange coupling ----Electrical system / Lighting: * 15-pin power socket * LED tail lights 12/24 V * Tire pressure monitoring system with display option in the truck via EBS signal - without truck-side installation ----General components: * Jost mechanical support legs (front) * 2 mechanical folding support legs (rear) * Plastic toolbox approx. 750 x 350 x 300 mm on the front side, right on the chassis * Underrun protection, bolted * Plastic quarter fenders ----Tipping bridge: * Net hooks in the bearings of the central locking system, as well as 2 on the front wall * Steel pallet-sided, 3-way tipping body with adjustable strong side boards (continuous side walls at the top with internal tube reinforcement - without center posts - foldable with side board spring lifters) * Rear supports, bolted * Combination steel wing doors - rear wall, 2-wing, asymmetrically divided - swivels and locks at 270° - not foldable - as well as with additional pivot frames for the automatic rear wall opening during tipping, locking via a galvanized swivel rod lock at the rear and central locking, deactivation function for the automatic rear wall function when tipping backwards with the wing door open * 4 mm sheet metal floor made of fine-grained steel ----Load securing: * 1 x 5-ton lashing point in each corner * 4 x 3-ton lashing eyes on each side, embedded in the outer frame ----Chassis: * Chassis made of fine-grained steel ----Ramps: * Receiving rail at the rear for the loading ramps * 1 pair of aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 tons / pair) suitable for rubber-tired and tracked vehicles * Storage compartment under the loading area in the chassis for the ramps, lockable from the rear ----Tires: * Tires 358/55 R 19.5 ----Painting: * Drawbar, underrun protection, rear supports, folding support legs (rear) hot-dip galvanized * Axles, springs, air tanks and support legs painted in a black tone * Painting of the side boards in a RAL color of your choice (but no special or metallic paint) can be changed up to approx. 6 weeks before completion Csdpfxsx Hm Rie Ak Tjrg ----Information: * Body - reinforced - with load securing certificate * Errors and prior sale reserved * Sample images ----Delivery time: * Available for immediate delivery from week 29/2026

Condition: new, maximum load weight: 10,660 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2026, * KA-TA-R 14.4: ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7-ton Gigant axles ----Suspension: * Parabolic springs with tandem equalizer ----Drawbar / Flange coupling: * Height-adjustable drawbar by 300 mm with 40 mm flange coupling ----Electrical system / Lighting: * 15-pin power connector * LED rear lights 12/24 V * Tire pressure monitoring with display option in the truck via EBS signal - without truck-side installation ----General components: * Jost mechanical support legs at the front * 2 mechanical folding support legs at the rear * Plastic tool box approx. 750 x 350 x 300 mm at the front on the right side of the chassis * Underride guard, bolted * Plastic quarter fenders ----Tipping bridge: * Net hooks in the bearings of the central locking system, as well as 2 on the front wall * Steel pallet-type 3-way tipping body with adjustable Strong sideboards (continuous side walls with internal tube reinforcement at the top - without center posts - can be folded down with sideboard spring lifters) * Rear crossbars, bolted * Combination steel hinged doors - rear wall 2-wing asymmetrical - can be pivoted and locked 270° - not foldable - as well as with additional swivel frames for the automatic rear wall opening during tipping, locking via galvanized swivel rod latch at the rear and central locking, deactivation function for automatic rear wall function when tipping backwards with the hinged door open Crjdpex Hm Rcsfx Ak Tog * 4 mm sheet steel floor made of fine-grain steel ----Load securing: * 1 x 5-ton lashing point in each corner * 4 x 3-ton lashing points on each side, embedded in the outer frame ----Chassis: * Chassis made of fine-grain steel ----Ramps: * Mounting rail at the rear for the loading ramps * 1 pair of aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 tons / pair) suitable for rubber-tired and tracked vehicles * Storage compartment lockable from the rear, located below the loading area in the chassis for the ramps ----Tires: * Tires 358/55 R 19.5 ----Painting: * Drawbar, underride guard, rear crossbars, folding support legs at the rear hot-dip galvanized * Axles, springs, air tanks, and support legs painted in a black tone * Painting of the sideboards in a RAL color of your choice (however, no special or metallic paint) can be changed up to approx. 6 weeks before completion ----Information: * Body - reinforced - with load securing certificate * Errors and prior sale excepted * Sample images ----Delivery time: * Available immediately from week 29/2026

Condition: used, empty load weight: 11,000 kg, maximum load weight: 39,000 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, first registration: 06/2015, next inspection (TÜV): 04/2027, loading space length: 9,250 mm, loading space width: 2,720 mm, loading space height: 950 mm, suspension: air, tire size: 235/75R17.5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden Features: 5 axles, turntable, air suspension, last axle with trailing steering, ABS (anti-lock braking system), lashing eyes, 2-part loading ramps, hydraulic ramps, rear supports, side aluminum fender guards, twin tires. Superstructure: 5-axle low-bed trailer with hydraulic 2-part loading ramps, 5x 10-ton Gigant axles, drum brakes, last axle with trailing steering! The first 3 axles have been fitted with new brake pads! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Crjdpfx Akozyymns Tog

Condition: used, maximum load weight: 31,000 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 07/2024, loading space length: 9,290 mm, loading space width: 2,520 mm, loading space height: 950 mm, * PT 40.0 Profi ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 4 x 11 to. Gigant axles ----Suspension: * Air suspension with lifting and lowering system and rapid lowering valve ----Drawbar: * Drawbar with 50 mm drawbar eye and height adjustment ----Lighting / Electrical: * EBS multi-voltage system with 12 & 24 V electrical system * 15-pin electrical connector * LED lighting system 12 / 24 V * LED rotating beacon (removable) at the rear * 2 LED reversing lights (switched via reverse gear) ----General components: * Pressure gauge - pressure indicator for determining payload (axles separated into 2 air suspension circuits) * Side underrun protection * Swivel supports at the rear of the chassis frame * Mech. adjustable warning sign packages at the front and rear * Front plastic quarter fenders with splash guard * Rear straight, galvanized steel side skirts with splash guard * Reflective contour strip on the side and rear * Tool box made of galvanized steel sheet, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high ----Low-loader platform: * Extension in front of the turntable platform approx. 490 mm long with 45° corners * ROBOTER welded anti-slip coating on the steel plate of the turntable platform * Hardwood flooring on the running surfaces of the low-loader platform ----Load securing (La-Si package consisting of): * 1 x 13.4 to. UVV lashing eye to the left and right in front of the front bulkhead beam * 4 holes on each side in the turntable platform, each with a lashing force of 2 to. * 1 pair of lashing eyes (13.4 to.) hanging at the rear left and right in front of the rear beam * 4 pairs of UVV lashing rings (10 to.) on each side, swiveling and lowering, capable of withstanding loads in all directions and recessed in the outer frame * 3 rung pockets on each side with simultaneous 2 to. lashing option ----Widening package: * Hot-dip galvanized mech. folding outriggers for 3 m overall width (however, not in the rear slope) * Beam holder for widening under the chassis on the left in the longitudinal direction ----Excavator arm rest: * Excavator arm rest above the rear axle up to the end beam approx. 2,100 mm long and approx. 190 mm deep * 2 pairs of 6.4 to. lashing eyes on each side in the excavator arm rest ----Ramps: * Hydr. one-piece access ramps (approx. 3,000 x 720 mm) mech. adjustable on the side * Outer planks of the access ramps made of hardwood * Steel structure as preparation for a 6-way control valve ----Loading height: * Unladen loading edge approx. 950 mm +/+ 20 mm ----Tires: * Tires 235/75 R 17.5 ----Paintwork: * Chassis, turntable, folding outriggers, mech. support legs, access ramps hot-dip galvanized * Axles, air tank, drawbar painted in a black tone ----Information: * Vehicle has a day registration in 07/2024, due to the missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Errors and prior sale reserved ----Delivery time: * Available for immediate delivery from Egestorf Codpfx Ael Tnu Ajk Torg

Condition: new, maximum load weight: 10,900 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * KA-TA-R 14.4 ----Brakes: * Wabco EBS * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 tons Gigant axles ----Suspension: * Parabolic springs with tandem equalizing unit Codpfx Asv Dz N Nek Terg ----Drawbar / Flange coupling: * Height-adjustable, hot-dip galvanized drawbar by 300 mm with 40 mm flange coupling ----General components: * Jost mechanical front support jacks * 2 mechanical, hot-dip galvanized folding support jacks at the rear * Hot-dip galvanized bolted under-run protection * Tool box made of galvanized sheet steel on the right side * Plastic quarter fenders * 2-step step on the left side as an aid for getting on ----Electrical system / Lighting: * TPMS tire pressure monitoring system * 15-pole power socket * LED tail lights ----Tipping bridge: * Steel, 3-sided tipping body * Continuous side walls at the top with internal tube reinforcement - without center supports - foldable with side panel spring lifters * Folding rear gate and pivoting via manual central locking * Hot-dip galvanized bolted rear supports * 4 mm sheet steel floor made of fine-grained steel * Lashing hooks, receiving rail at the rear for loading ramps * Preparation for later retrofitting of side panel attachments ----Chassis: * Hot-dip galvanized chassis ----Load securing: * 1 x 5 tons lashing eye in each corner, as well as 4 x 3 tons lashing eyes on each side embedded in the outer frame ----Aluminum loading ramps: * 1 pair of aluminum loading ramps approx. 3,570 x 400 mm (load capacity 8 tons / pair) suitable for rubber-tired and tracked vehicles * Lockable storage compartment at the rear below the loading area, embedded in the chassis ----Tires: * Tires 385/55 R 22.5 ----Painting: * Axles, springs, air tanks and support jacks painted in a black tone * Chassis, drawbar, floor, front panel, folding supports hot-dip galvanized * Painting of the side panels in a RAL color of your choice (but no special or metallic paint) can be changed up to approximately 6 weeks before completion ----Information: * Body reinforced with load securing certificate according to EN 12642 XL * New vehicle without initial registration with manufacturer's warranty * Errors and prior sale subject to change ----Delivery time: * Available from approximately week 45 / 2026

Condition: used, maximum load weight: 12,080 kg, overall weight: 14,400 kg, axle configuration: 2 axles, first registration: 06/2024, loading space length: 3,900 mm, loading space width: 1,920 mm, loading space height: 415 mm, Year of construction: 2022, Equipment: ABS, * ETM-TA 14.4: ----Brakes: * Wabco ABS braking system * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Coupling Eye: * Height-adjustable drawbar (+/- 150 mm) * 40 mm bolted coupling eye ----General Attachments: * Jost support winch at the front * Side underride protection * Foldable A-sign at the rear ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----Body: * Fixed steel front and side walls * Removable steel rear wall * Floor made of 50 mm softwood * 1 sliding steel plate (750 x 1,000 mm) at the front incl. 2 removable trough stops at the front, insertable in 2 positions * Rear cross member designed for aluminum loading ramps incl. 2 additional drop supports at the rear ----Loading Edge: * Unloaded loading edge approx. 710 mm ----Load Securing: * 4 removable trough stops, can be inserted in 2 positions for lateral centering of troughs * Each side with 1 x (13.5 t) UVV lashing point for securing devices * 2 ratchet tensioners (spindle adjustment) with compensation chain and quick shortener (tension force 6,300 kg) ----Tyres: * Tyre size: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm Credpjl Th Eyjfx Ak Tog ----Paintwork: * Chassis, front wall, side walls, mudguards, drawbar, rear drop supports hot-dip galvanized * Axles, springs, support winch, air tank painted in black ----General Information: * Vehicle has a single-day registration in 06/2024, due to missing tire pressure monitoring system and has not been loaded/used * Subject to errors and prior sale ----Delivery Time: * Immediately available from Egestorf on the A7

Condition: used, maximum load weight: 12,080 kg, overall weight: 14,400 kg, axle configuration: 2 axles, first registration: 06/2024, loading space length: 3,900 mm, loading space width: 1,920 mm, loading space height: 415 mm, Year of construction: 2022, Equipment: ABS, * ETM-TA 14.4: ----Brakes: * Wabco ABS brake system * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7-ton Gigant axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Drawbar Eye: * Height-adjustable drawbar (+/- 150 mm) * 40 mm bolt-on drawbar eye ----General Attachments: * Jost landing gear at the front Cjdpfjl Th Dmsx Ak Torg * Side underrun protection * Rear folding A-board ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----Body: * Fixed steel front and side walls * Removable steel rear wall * Floor made of 50 mm softwood * 1 sliding plate support 750 x 1,000 mm at the front section including 2 removable skip stops at the front, lockable in 2 positions * Rear traverse for attaching aluminium loading ramps, incl. 2 additional rear drop-down supports ----Loading Edge: * Unloaded loading edge approx. 710 mm ----Load Securing: * 4 removable skip stops, can be locked in 2 positions for side centering of skips * 1 x (13.5 t) UVV lashing point per side for attaching tie-down elements * 2 ratchet tensioners (spindle adjustment) with compensating chain and quick shortener (tensioning force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Paintwork: * Chassis, front wall, side walls, mudguards, drawbar, rear drop-down supports hot-dip galvanized * Axles, springs, landing gear, and air reservoirs painted in black ----General Info: * Vehicle registered for one day in 06/2024, due to missing tyre pressure monitoring system; never loaded or used * Errors and prior sale excepted ----Delivery Time: * Immediately available ex Egestorf (A7)

Condition: new, maximum load weight: 15,970 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, ETÜ-TA-R 21.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axle: * 2 x 11 ton Gigant axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange coupling: * Drawbar with 50 mm flange coupling and height-adjustable drawbar ----Lighting / Electrical System: * 15-pin power connector * LED lights 12/24 V * TPMS (Tire Pressure Monitoring System) ----General Components: * Jost support leg at the front * Outboard folding supports at the rear * Plastic tool box approx. 750 x 350 x 300 mm on the right side * Side underrun protection * Plastic quarter fenders ----Low-Loader Platform: * In front of the headboard and rear slope, provision for retrofitting container locking mechanisms for transporting 20" containers * Design for 21 tons GVW with reinforced frame and reinforced axles * Reinforcement package for drilling rig transport on the chassis * 50 mm hardwood floor in a clamped design * In front of the headboard, provision for retrofitting container locking mechanisms * Bolted headboard made of smooth sheet metal * Divided side walls made of steel sheet - trapezoid profile - foldable with folding mechanism in the middle * Steel rear wall can be slid between the ramps - bracket for storage when not in use inside in front of the headboard * Rear supports bolted ----Load Securing: * Perforated outer frame approx. 45 degrees angled, with 2 tons lashing force every 480 mm * Installation of 3 tons tie-down brackets every 600 mm possible * Profifix lashing rail in the longitudinal axis in the middle for lashing up to LC 3000 daN * In the corners at the front and rear, 1 x 10 tons lashing each * Lasi package with 2 x 8 tons lashing points each on the sides, recessed in the outer frame, various holes in the front and end beams for 1.2 tons lashing ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation approx. 3,000 x 620 mm (can be moved together to 20 mm) * Approach slope at the rear approx. 860 mm chassis ----Loading Heights: * Unloaded approx. 940 mm * Loaded approx. 910 mm Crodpfol Tihxsx Ak Teg ----Wheelbase / Tires: * 1,810 mm * Tires: 235/75R17.5 ----Paint: * Painting of the side walls in RAL - 9010 pure white * Drawbar, headboard, rear flap, folding supports and ramps hot-dip galvanized * Axles, springs, air tanks and support leg painted in a black tone ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately from Egestorf

Condition: used, empty load weight: 7,340 kg, maximum load weight: 22,660 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 05/2012, loading space length: 9,200 mm, suspension: steel, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length approx. 9,200 mm, loading height approx. 900 mm, 16 x lashing eyes, , Vehicle is sold on order , , , -- Subject to misprints, errors and alterations, sample pictures --, More data under: !, More Details: ! Cedpfx Akozx Rhao Torg

Condition: new, maximum load weight: 8,870 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-ER 11.9: ----Brake system: * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle system ----Suspension: * Parabolic leaf springs with equalizing aggregate ----Drawbar / Flange towing eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange towing eye ----General attachments: * Jost mechanical support landing gear at the front * Rear external foldable support legs, hot-dip galvanized * Side underrun protection * Plastic quarter mudguards * Plastic toolbox mounted front-right on the bulkhead ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * LED tail lights ----Loading area: * 50 mm softwood floor * 20" container locks fitted at front and rear * Front bulkhead bolted, made from smooth sheet metal * Drop sides made from trapezoidal-profiled steel, foldable with tailgate spring assist * Rear stanchions, hot-dip galvanized and bolted ----Load securing: * Perforated outer frame, approx. 45° edged, with 2 t lashing capacity every 480 mm Crsdjl Thy Repfx Ak Tog * Optional installation of 3 t folding lashing brackets every 600 mm (each side fitted with 5 lashing rings) * One 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross beams for 1.2 t lashing options ----Ramps: * 1 pair of aluminum approach ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for pneumatic-tyred and tracked vehicles * Rear stowage compartment beneath the loading platform, integrated in the chassis ----Paint/Coating: * Chassis, drawbar, front and rear bulkheads hot-dip galvanized * Side board color RAL 9010 pure white * Sides can be painted in any RAL color at extra cost ----Additional information: * New vehicle without registration * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf