Trailer with working platform

MÜLLER-MITTELTAL 3-achs Plateu Anhänger, mit 3 Kabelböcken

Condition: new, maximum load weight: 17,650 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 9,230 mm, loading space width: 2,480 mm, Year of construction: 2026, * TP 30.0 with 3 cable reels ----Brakes: Bwjdpex Nlkajfx Adwjw * Wabco TEBS (electronic braking system) * Emergency release device for spring accumulators * Drum brakes ----Axle: * 3 x 11 ton Gigant axles ----Suspension: * Air suspension 17.5" with lifting and lowering system ----Drawbar: * Drawbar, 1,800 mm long, with 40 mm drawbar eye ----Electrical system / Lighting: * Tire pressure monitoring with display option in the truck display via EBS signal - without truck-side installation * 15-pole power plug * 2 additional LED reversing lights (switched via reverse gear) * LED lighting ----General components: * Aluminum air reservoir * Stainless steel toolbox on the side, approx. 1,000 x 300 x 600 mm * Side impact protection * Plastic quarter fender * Underrun protection ----Platform: * Zurr-fix outer frame, 45° angled, with hole pattern for lashing straps, lashing force per lashing point 2,000 kg at a distance of 480 mm * Installation of 3,000 kg drop-side brackets possible at a distance of approx. 600 mm - the scope of supply includes 12 pieces of 3,000 kg lashing brackets on each side * 5 slots for tube supports 100 x 50 mm on each side in the outer frame - the supports are not included in the scope of supply * 30 mm screen-printed floor ----Cable reel supports: * 3 galvanized cable reel supports secured by container locks, with side forklift pockets, center to center 800 mm (width of the pockets 185 mm) * Reel diameter max. 2,600 mm and reel width max. 1,800 mm * Clear width between the support arms approx. 1,824 mm, with cross connection * 6,000 kg reel weight per cable reel support * Without drive and drum brake * Support arm with clamping device for securing the reel shaft * Steel reel shaft, 76 mm diameter, with centering and rotatable ends * 2 spacing rings * 2 centering cones made of polyamide * 4 pieces of 3.2 ton lashing rings on the support arms for customer-side securing of the reel against rotation and unwinding ----Loading height: * loaded approx. 1,040 mm ----Painting: * Chassis, bogie, drawbar, outer frame, underrun protection hot-dip galvanized * Axles painted in a black tone * TP 30.0 with 3 cable reels

Condition: new, overall weight: 1,350 kg, axle configuration: 1 axle, suspension: other, Year of construction: 2026, Equipment: trailer coupling, - Bagela KW 3000 cable pulling winch - 3800 x 1600 x 1300 mm - STRAIGHT DRAWBAR - Cable winch mounted on a single-axle chassis - Approved for 100 km/h Bodpfxjikp Abj Adwsww - Operation via touchscreen - Printer - 500 meters of steel cable, D = 10 mm - Pulling speed infinitely adjustable - Maximum 60 meters per minute - Maximum pulling force 30 kN - Support via two individually extendable and retractable supports - Shipping costs: 1380.00 Euros + VAT - Many extras available on request, such as 1000 meters of rope + 1590.00 Euros - Deflection boom with swivel joint - Holder for deflection boom - Remote control: forward, stop, reverse / wireless remote control, etc. Please feel free to request further details if needed. - Telephone

Condition: new, maximum load weight: 17,650 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 9,230 mm, loading space width: 2,480 mm, Year of construction: 2026, * TP 30.0 with 3 cable cradles ----Brakes: * Wabco TEBS (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11-ton Gigant axles ----Suspension: * Air suspension 17.5" with lifting and lowering system ----Drawbar: * Drawbar, 1,800 mm long, with 40 mm drawbar eye ----Electrical System / Lighting: * Tire pressure monitoring system with display option on the truck display via EBS signal - without installation on the truck side * 15-pole power connector * 2 additional LED reversing lights (switched via reverse gear) * LED lighting ----General Components: * Aluminum air tank * Stainless steel tool box, approx. 1,000 x 300 x 600 mm, on the side * Side underrun protection * Plastic quarter fenders * Underrun protection ----Platform: * Lashing-fix outer frame, 45° angled, with hole pattern for lashing means, lashing force per lashing point 2,000 kg at a distance of 480 mm * Installation of 3,000 kg drop-side brackets possible at a distance of approx. 600 mm - the scope of delivery includes 12 pieces of 3,000 kg lashing brackets on each side * 5 sockets on each side for 100 x 50 mm tubes in the outer frame - the tubes are not included in the scope of delivery * 30 mm screen-printed floor Bwodpfx Ajx Nlkgjdwjw ----Cable Cradles: * 3 galvanized cable cradles secured via continuous locking mechanisms, with side fork pockets, center to center 800 mm (width of the pockets 185 mm) * Drum diameter max. 2,600 mm and drum width max. 1,800 mm * Clear width between the support arms approx. 1,824 mm, with cross connection * 6,000 kg drum weight per cable cradle * Without drive and drum brake * Support arm with tension lock for securing the drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotatable ends * 2 spacer rings * 2 centering cones made of polyamide with 2 handles * 4 pieces of 3.2 ton lashing eyes on the support arms for customer-side securing of the drum against rotation and unwinding ----Loading Height: * Approx. 1,040 mm under load ----Painting: * Chassis, bogie, drawbar, outer frame, underrun protection hot-dip galvanized * Axles painted in a black tone ----Information: * Increasing the permissible total weight to 30 tons is technically possible * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Available from approx. week 51/2026

Condition: new, overall weight: 2,600 kg, axle configuration: 2 axles, suspension: other, Equipment: trailer coupling, Cable pulling winch Bagela KW 5010 L = 4800 mm, W = 1600 mm, H = 1450 mm Bwedoiv D Rvspfx Adwow Weight 1450 kg Tandem axle, braked Height-adjustable drawbar Lockable plastic housing 4-cylinder engine, LDW 10, 23 kW, diesel Hydraulic transmission 1000 meters of steel cable, D = 12 mm Maximum pulling force 50 kN Pulling speed 30 m/min Torque limiter with cable stop Operation via touchscreen Thermal printer Pulling speed can be continuously adjusted via a proportional valve Rear: 2 extendable support legs Many extras available upon request Freight and postage costs: 1380.00 Euros

Condition: used, empty load weight: 1,750 kg, maximum load weight: 1,000 kg, overall weight: 3,000 kg, axle configuration: 1 axle, loading space length: 3,800 mm, loading space width: 1,600 mm, loading space height: 1,500 mm, color: white, Year of construction: 2020, Equipment: trailer coupling, Rental prices: net, plus VAT 1 day: 295 euros 1 week: 1060 euros 1 month: 2800 euros 1 day: max. 8 operating hours 1 week: max. 40 operating hours 1 month: max. 176 operating hours For sales and rentals, please do not hesitate to contact me. Doll Fahrzeugbau oHG Return/Cleaning The machine must be returned with a full tank. We charge 2.30 euros per liter for refueling. We charge 80 euros for inspection and testing of the machine and cable. Technical data: Cable winch KW 3000/diesel engine, metal housing Technical data: - max. pulling force: 3000 daN - pulling speed: 0-60 m/min, continuously adjustable (load-dependent) - usable cable length: 1000 m - cable diameter: 10 mm - engine: 4-cylinder diesel, 16.5 kW, electric start, water-cooled - warning light for fuel reserve - transmission: hydrostatic power transmission - pulling force and cable travel measurement: programmable digital display, printer - shutdown contact: via solenoid valve in the hydraulic circuit - operation: electric with proportional control - lockable housing - housing sound insulation: 78 dba - chassis: sprung single-axle chassis 1800 kg, height-adjustable drawbar with overrun and parking brake, ball hitch, 100 km/h - support tensioning device with lever - dimensions: L x W x H 3800 x 1650 x 1300 mm - weight: 1800 kg - paint: white Bwedsin Ia Hepfx Adwew - remote control with 100 m cable - torque limiter

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axle: * 3 x 11-ton Gigant axles * Center axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm drawbar eye and height adjustment ----Electrical System / Lighting: * LED tail lights * 15-pin electrical connector * TPMS (Tire Pressure Monitoring System) ----General Attachments: * Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Lateral underrun protection * Plastic quarter fenders with splash protection * Plastic rear impact protection buffer * Mechanical support legs at the rear Bwjdpetplv Tsfx Adwow ----Container / Low-Bed Platform: * Hot-dip galvanized main frame with raised outer frames (approx. 25 mm higher) to guide roll-off containers * Steel sheet floor with recesses for rollers in the bogie area * When transporting roll-off containers, a container length of 5,500 - 7,000 mm is possible * Pneumatic 4-point clamping lock as well as mechanical plug-in stop angles at the front in the running tracks * Load securing certificate according to DIN 30722-1 * Transport of up to 2 demountable containers with a maximum volume of 10 m³ is possible * Includes 8 repositionable bin stops for lateral centering of the bins, front 4 bin stops plugged in with pivoting stops ----Load Securing: * 3 pairs of 10-ton UVV lashing eyes on the side for attaching tensioning elements for form-locking and force-locking securing of the bins * 4 lashing bars in a cloverleaf design (on the side) and 1 pair of 13.4-ton UVV lashing eyes at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld bead as anti-slip coating in the running track area of the ramp * 1 pair of aluminum loading ramps (16 tons / pair) 2,800 x 400 mm suitable for rubber-tired and tracked vehicles (lockable storage compartment from the rear) ----Tires: * Tires: 235/75 R17.5 ----Riding Height: * Riding height when loaded approx. 1003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour striping on the side and rear * Axles, turntable, drawbar and air tank painted in a black tone * Hot-dip galvanized main frame ----Information: * Technically, a permissible total weight of 27,000 kg is possible * New vehicle without initial registration with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Available for immediate delivery from Egestorf

Condition: new, empty load weight: 1,300 kg, axle configuration: 1 axle, loading space length: 3,250 mm, loading space width: 1,650 mm, loading space height: 1,420 mm, suspension: other, color: blue, Year of construction: 2024, Equipment: had accident, trailer coupling, Thaler KE-SP 2030 capstan winch - Pulling force 3000 daN - Single-axle chassis with straight drawbar - TM 3000 electronic measuring device with USB interface and stick - 3 cylinder diesel engine 15.4 KW, Stage V - Protective cover with sheet steel cover hood, lockable - Loading frame with crane eye - Drum with 500 mm rope, 9.5 mm thick - Twist catcher D = 28 mm, firmly pressed onto the rope - Many extras possible such as : - Painting, color according to Ral card - Rope length 1000 meters - Height-adjustable drawbar - TM 3001 electronic measuring device (enables direct input via an app, smartphone/tablet if required) - Petrol engine instead of diesel engine Bodjmx Uhxspfx Adwoww - Printer for the electronic measuring device - Dead man's switch - Radio remote control - 18 KW three-phase motor instead of diesel engine - Adjustable rear working light - If you have any further questions, please do not hesitate to call us. - Freight and postage 1100.- Euro

Condition: new, maximum load weight: 23,940 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profi 30.0 ----Brakes: * EBS braking system * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11-ton Gigant axles ----Suspension: * Parabolic springs with mechanical axle compensation at the rear ----Drawbar: * Drawbar with 50 mm drawbar eye and height adjustment via coil spring & tension lock ----Lighting / Electrical System: Bodel Th I Aspfx Adweww * TPMS tire pressure monitoring system * Multi-voltage system * LED tail lights 12 / 24 V * Rotating beacon (removable) at the rear * 15-pin power connector ----General Components: * Side impact protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front mudguards made of plastic and rear mudguards made of straight, galvanized steel sheet, each with splash protection * Tool box made of galvanized steel sheet - black powder-coated - approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for the tool box in the turntable platform * 4 lashing points on each side (but no lashing bars included) with simultaneous lashing capability ----Load Securing (La-Si package consisting of): * 2 lashing points (6.4 tons) at the front left & right on the main frame of the turntable platform * 6 pairs of UVV lashing rings, swivel and lowerable, loadable in all directions and recessed in the outer frame * 13.4 tons in the corners, otherwise 10 tons ----Widening: * 6 pairs of mechanical folding outriggers for a total width of 3 meters (but not in the rear slope), * Widening boards placed in the middle of the loading area ----Ramps: * Hot-dip galvanized, one-piece hydraulic ramps (approx. 3,000 x 720 mm), mechanically adjustable on the side * 4-way control block for retrofitting of the hydraulic side ramp adjustment ----Loading Area: * above the turntable: approx. 1,960 x 2,520 mm & unladen approx. 1,070 mm * rear loading area: approx. 6,500 x 2,520 mm & unladen approx. 910 mm (incl. 860 mm approach angle) ----Tires: * 235/75 R 17.5 twin tires ----Unladen Weight: * approx. 5,980 kg unladen weight ----Painting: * Chassis, turntable, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in a black shade ----Information: * Technically possible gross vehicle weight of 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available from Egestorf