Used Müller-Mitteltal Edu Trailers for sale (273)

Condition: used, empty load weight: 3,250 kg, maximum load weight: 10,250 kg, overall weight: 13,500 kg, axle configuration: 2 axles, first registration: 09/2004, loading space length: 4,500 mm, loading space width: 2,300 mm, loading space height: 600 mm, suspension: steel, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: en route / in transit, steel body, leaf spring suspension, 2 axles, BPW axles, tandem axle, side protection, front support, swing-out gates, drawbar with adjustable height. Nedpfoznldusx Al Djcw Body: 3-sided tipper trailer. All information is provided without guarantee as the trailer is currently en route! ACCESSORY INFORMATION IS PROVIDED WITHOUT GUARANTEE; subject to changes, prior sale, and errors!

Condition: used, functionality: unexamined, empty load weight: 3,050 kg, maximum load weight: 10,450 kg, overall weight: 13,500 kg, axle configuration: 2 axles, first registration: 09/2003, next inspection (TÜV): 06/2026, loading space length: 4,500 mm, loading space width: 2,200 mm, loading space height: 1,100 mm, suspension: steel, tire size: 285/70R19,5, tire condition: 40 %, maximum speed: 80 km/h, color: orange, trailer brake: trailer braked, Year of construction: 2003, Equipment: ABS, Central locking on all 3 sides, tilting cylinder is tight, rust damage and signs of wear, brakes should be adjusted. Includes body, total height of the body is 1.10 meters. Ideal trailer for a Unimog or truck. Njdoznmh Iepfx Al Docw Sold as is, TÜV inspection due.

Condition: used, empty load weight: 3,420 kg, maximum load weight: 7,080 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 04/1998, loading space length: 4,480 mm, loading space width: 2,220 mm, loading space height: 500 mm, suspension: steel, tire size: 245/70R19.5, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel body, leaf spring suspension, 2 axles, tandem axle, side guards, front support legs, rear support legs, swinging side gates, height-adjustable drawbar. Ncsdpfey U Ifdsx Al Dew Body: 3-sided tipping trailer. This trailer comes from the municipal administration! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: used, empty load weight: 4,390 kg, maximum load weight: 14,610 kg, overall weight: 19,000 kg, axle configuration: 2 axles, first registration: 08/2018, suspension: other, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, 620 mm sideboards, 12 tie-down points, surcharge for ramps: €900, -- subject to printing errors, errors and changes, sample images --, more data available at: !, More Details: ! Nodpfozn U Agsx Al Docw

Condition: used, empty load weight: 3,440 kg, maximum load weight: 8,460 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 07/2020, next inspection (TÜV): 07/2026, loading space length: 5,040 mm, loading space width: 2,420 mm, suspension: steel, tire size: 385/55R 19,5 156J, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 385/55R 19,5 156J, rear tire size: 385/55R 19,5 156J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Wide tires, lashing points, surcharge for ramps: 1,000 €, printing errors, mistakes and modifications excepted, sample images, more details at: ! Nodszn U Aaepfx Al Dscw

Condition: new, suspension: other, color: other, gearing type: other, driver cabin: other, emission class: none, fuel: biodiesel, Storage compartment for aluminum ramps, price per storage compartment, length approx. 2.48 m, width approx. 1 m, height approx. 27 cm, , --  Misprints, errors and changes reserved, sample images --, More information at: !, More details: ! Njdpfxezn Nwrs Al Docw

Condition: used, empty load weight: 8,850 kg, maximum load weight: 31,150 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 08/2019, suspension: steel, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Total loading platform length approx. 9,500 mm, lowbed loading platform length approx. 7,360 mm, loading height approx. 910 mm, 14 pairs of lashing eyes. Vehicle is offered on behalf of the customer. -- Subject to errors, misprints, and changes. Sample images -- More data at: !, More Details: ! Ncjdpfezn Hxtox Al Dsw

Condition: used, empty load weight: 7,340 kg, maximum load weight: 22,660 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 05/2012, loading space length: 9,200 mm, suspension: steel, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length approx. 9,200 mm, loading height approx. 900 mm, 16 x lashing eyes, , Vehicle is sold on order , , , -- Subject to misprints, errors and alterations, sample pictures --, More data under: !, More Details: ! Nodpfezn Hx Tox Al Dscw

Condition: used, empty load weight: 5,750 kg, maximum load weight: 24,250 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 01/1993, suspension: steel, tire size: 235/75R17,5 141/140J, color: other, gearing type: other, front tire size: 235/75R17,5 141/140J, rear tire size: 235/75R17,5 141/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Customer vehicle. Subject to printing errors, errors and changes. Sample images. More details available at: ! Ncsdsznur Uopfx Al Djw

Condition: used, empty load weight: 3,480 kg, maximum load weight: 10,920 kg, overall weight: 14,400 kg, axle configuration: 2 axles, first registration: 10/2019, next inspection (TÜV): 02/2027, loading space length: 5,040 mm, loading space width: 2,420 mm, suspension: steel, tire size: 385/55R19,5 156J, color: other, gearing type: other, front tire size: 385/55R19,5 156J, rear tire size: 385/55R19,5 156J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Wide tires, lashing eyes, surcharge for ramps: €800, -- Subject to printing errors, mistakes, and changes, sample images, more data at: ! Nsdpsznutfsfx Al Decw

Condition: used, empty load weight: 3,680 kg, maximum load weight: 10,720 kg, overall weight: 14,400 kg, axle configuration: 2 axles, first registration: 11/2021, loading space length: 5,000 mm, loading space width: 2,420 mm, suspension: steel, tire size: 385/55R19,5 156J, color: other, gearing type: other, front tire size: 385/55R19,5 156J, rear tire size: 385/55R19,5 156J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, AS NEW, wide tyres, TIPPER BODY GALVANIZED, 12 lashing eyes, 600 mm side walls, surcharge for ramps 1,000 €, -- Subject to printing errors, mistakes and changes, sample images --, More data at: !, More details: ! Njdeznupyjpfx Al Docw

Condition: used, empty load weight: 4,190 kg, maximum load weight: 13,810 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2016, suspension: air, tire size: 385/55R22,5 160J, color: other, gearing type: other, front tire size: 385/55R22,5 160J, rear tire size: 385/55R22,5 160J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing eyes, 800 mm aluminum side walls, surcharge for ramps €800, -- misprints, errors and changes excepted, sample images --, More data at: !, More Details: ! Ncodpfsznuqdex Al Dsw

Condition: used, empty load weight: 3,750 kg, maximum load weight: 9,750 kg, overall weight: 13,500 kg, axle configuration: 2 axles, first registration: 01/2014, loading space length: 5,040 mm, loading space width: 2,420 mm, suspension: steel, tire size: 385/55R19,5 148J, color: other, gearing type: other, front tire size: 385/55R19,5 148J, rear tire size: 385/55R19,5 148J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Drop-side panels, wide tires, lashing eyes, surcharge for ramps: €900 net, subject to printing errors, errors and changes, sample images, more details at: ! Njdpfx Alsznikfs Djcw

Condition: used, empty load weight: 4,550 kg, maximum load weight: 13,450 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2016, loading space length: 6,540 mm, loading space width: 2,480 mm, suspension: air, tire size: 235 / 75 R 17,5, color: beige, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, 10 pairs of lashing eyes, loading height approx. 900 mm, , customer vehicle, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Njdozniggspfx Al Docw

Condition: used, empty load weight: 6,500 kg, maximum load weight: 23,500 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 06/2010, suspension: steel, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Vehicle is sold on behalf of a customer, partly wooden boards def., 17 pairs of lashing eyes, , loading height approx. 900 mm, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Nodsznig Tjpfx Al Dscw

Condition: used, empty load weight: 7,340 kg, maximum load weight: 22,660 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 05/2012, loading space length: 9,200 mm, suspension: steel, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length approx. 9,200 mm, loading height approx. 900 mm, 16 x lashing eyes, , Vehicle is sold on order , , , -- Subject to misprints, errors and alterations, sample pictures --, More data under: !, More Details: ! Ncsdpfx Ajzncy Hol Dsw

Condition: new, suspension: other, color: other, gearing type: other, driver cabin: other, emission class: none, Leveling bracket for low-loader semi-trailer including container closures, price per leveling bracket, , --  Subject to printing errors, mistakes and changes, sample images --, More information at: !, More details: ! Njdpfx Aszm Ullol Docw

Condition: used, empty load weight: 6,500 kg, maximum load weight: 23,500 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 06/2010, suspension: steel, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Vehicle is sold on behalf of a customer, partly wooden boards def., 17 pairs of lashing eyes, , loading height approx. 900 mm, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Ncsdpfx Aljzm Ia Nj Dsw

Condition: used, maximum load weight: 7,700 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 08/1979, next inspection (TÜV): 07/2027, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, total width: 2,350 mm, total height: 1,650 mm, Equipment: tail-lift, Müller MItteltal KA-TA Njdpszn E Uyefx Al Dscw * Tandem three-way tipper * Heavy-duty trailer * First registration: 08/29/1979 * Next inspection: 07/2027 * Gross vehicle weight: 10,500 kg * Tare weight: 2,800 kg * Payload: 7,700 kg * Overall dimensions: 6,200 mm x 2,350 mm x 1,650 mm * Internal dimensions: 4,500 mm x 2,200 mm x 500 mm * Side walls painted * Air brake system * Steel side walls, rear section can be folded down, removable, and pivoting * 2 supports at the rear * Support wheel ATTENTION!!!!! PLEASE READ CAREFULLY!!!!! We expressly reserve the right to sell the item in the meantime, as we are also offering it on other platforms. We strongly recommend an inspection and assessment to ensure that the buyer does not have any incorrect expectations regarding the condition and suitability of the item. Inspections and assessments are possible and expressly welcome at any time by prior appointment!!! Illustrations are similar and may include optional accessories that incur an additional charge. The specified internal dimensions are approximate. Information without guarantee! Errors and omissions excepted! TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! EXCHANGE DEALS AND PAYMENT PLANS POSSIBLE!!! Exhibition grounds: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday - Friday 8:30 a.m. to 5:00 p.m., Saturday 8:30 a.m. to 2:00 p.m. Over 500 trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: new, maximum load weight: 8,650 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * KA-TA-R 11.9 Masterline ----Brakes: * Wabco EBS * Emergency release system for spring brake cylinders Ncjdpfeq Euagex Al Djw * Drum brakes ----Axles: * 2 x 5.5 ton BPW axles ----Suspension: * Parabolic springs with tandem equalizer ----Drawbar / Flange coupling: * Height-adjustable drawbar by 300 mm with 40 mm flange coupling ----Electrical system / Lighting: * TPMS tire pressure monitoring system * Multivoltage * 15-pin power connector * 12 V 13-pin auxiliary cable * Extended connection cables for forestry and agricultural tractors * LED tail lights ----General components: * Mechanical support winch at the front * 2 mechanical folding supports at the rear * Plastic tool box on the side, right * 2-step step on the left side in the direction of travel at the front * Underrun protection, bolted * Plastic fender ----Tipping body: * Lashing hooks on the side and rear in the bearings of the central locking system, as well as 2 pieces on the front wall * Steel pallet-sided, 3-way tipping body (continuous side walls - without center rails - foldable with side board spring lifts, tailgate foldable and pivoting via manual central locking) * 4 mm steel sheet floor * Mounting rail at the rear for loading ramps ----Load securing: * 1 x 5-ton lashing point in each corner * As well as 4 x 3-ton lashing eyes on each side, embedded in the outer frame ----Ramps: * 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 tons / pair), suitable for vehicles with rubber and chain tracks * Lockable storage compartment at the rear below the loading area, integrated into the chassis ----Tires: * Tire size 385/55 R 19.5 ----Paintwork: * Chassis, drawbar, tipping body, front wall, folding supports, and rear frame hot-dip galvanized * Axles, springs, air tank, flange coupling, and support winch painted in a black tone * Painting of the side boards in RAL - 9010 pure white ----Information: * Body reinforced with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Errors and prior sale are subject to change ----Delivery time: * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 13,650 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Year of construction: 2026, * RAK 18.0 Outer Roller with Rear Tilting Function ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axle: * BPW Eco Plus axles ----Suspension: * Air suspension (automatic lowering when the brake is released) ----Drawbar: * Pneumatically lowerable drawbar, approx. 2,100 mm long, with 40 mm drawbar eye and height adjustment via tension spring & locking bolt ----General Accessories: * Plastic tool box - approx. 858 x 500 x 500 mm - on the right side * Closed plastic fenders, front and rear * Closed side underrun protection * Rear underrun protection, bolted on * Storage box for container nets, made of galvanized perforated sheet metal, approx. 1,000 x 500 x 500 mm * Foldable A-sign at the rear Nedpsx Ipbmefx Al Docw * Rear impact protection buffer ----Electrical System / Lighting: * EBS multi-voltage system for towing vehicles with 12 & 24V electrical systems * 15-pin 24V power connector * LED lighting system for 12 & 24V * 2 additional LED reversing lights * TPMS tire pressure monitoring system ----Suitable for Container Lengths: * For containers from 6,500 mm to 7,000 mm ----Container Running Surface / Tilting Bridge: * External roller guide through flat steel edging with a clear distance of approx. 2,180 mm in conjunction with 3 centering pieces on each side for container guidance * To accommodate and stop the container rollers, 2 recessed roller bearings connected to the tilting frame are mounted on the rear side, with pneumatic actuation to prevent slippage in the longitudinal direction * The positive locking of the roll-off containers is achieved via a pneumatic cross-bracing unit installed in the front of the tilting frame and operable from the outside (single-sided operation) * Chassis frame with rear tilting main frame - hydraulic tilting system in single-cylinder design * Tilting angle 42° * Rubber pads between chassis and tilting frame * The containers are pushed on from the front, hot-dip galvanized chassis ----Tires: * Single tires 385/55 R 22.5 ----Loading Height: * Unladen approx. 1,270 mm ----Painting: * Underrun protection and locking parts (without topcoat) * Turntable, air tank, axles, slewing ring and drawbar painted in a black tone * Hot-dip galvanized ----Information: * For container transport according to DIN 30722 Part 1 * New vehicle without initial registration, with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available from Egestorf

Condition: new, maximum load weight: 8,650 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * KA-TA-R 11.9 Masterline ----Brakes: * Wabco EBS * Emergency release system for spring brake cylinders * Drum brakes ----Axle: * 2 x 5.5 tons BPW axles ----Suspension: * Parabolic springs with tandem equalizer Ncsdpfsl Thw Iox Al Dow ----Drawbar / Flange coupling: * Height-adjustable drawbar by 300 mm with 40 mm flange coupling ----Electrical system / Lighting: * TPMS tire pressure monitoring system * Multivoltage * 15-pole power connector * 12 V 13-pole auxiliary cable * Extended connection cables for forestry and agricultural towing vehicles * LED tail lights ----General components: * Mechanical support crank at the front * 2 mechanical folding supports at the rear * Plastic tool box on the right side * 2-step footstep on the left side, facing forward * Underrun protection, bolted * Plastic quarter fenders ----Tipping body: * Net hooks on the side and at the rear in the bearings of the central locking system, as well as 2 pieces on the front wall * Steel pallet-sided 3-way tipping body (continuous side walls - without center rails - foldable with side panel spring lifters, foldable tailgate as well as pivoting via manual central locking) * 4 mm steel sheet floor * Mounting rail at the rear for loading ramps ----Load securing: * 1 x 5 tons lashing point in each corner * as well as 4 x 3 tons lashing points on each side, embedded in the outer frame ----Ramps: * 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 tons / pair) suitable for rubber-tired and tracked vehicles * Lockable storage compartment at the rear under the loading area, integrated into the chassis ----Tires: * Tire size 385/55 R 19.5 ----Paint finish: * Chassis, drawbar, tipping body, front wall, folding supports and rear rails hot-dip galvanized * Axles, springs, air tank, flange coupling and support crank painted in a black tone * Painting of the side panels in RAL - 9010 pure white ----Information: * Body reinforced with load securing certificate according to EN 12642 XL * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 13,650 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Year of construction: 2026, RAK 18.0 Outer Roller with Rear Tilting Function ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axle: * BPW Eco Plus axles ----Suspension: * Air suspension (automatic lowering when the brake is released) ----Drawbar: * Pneumatically lowerable drawbar, approx. 2,100 mm long, with 40 mm drawbar eye and height adjustment via coil spring and tension lock ----General Components: * Plastic toolbox - approx. 858 x 500 x 500 mm - on the right side * Closed plastic fenders, front and rear * Closed side underrun protection * Rear underrun protection, bolted on * Storage box for container nets, made of galvanized perforated sheet metal, approx. 1,000 x 500 x 500 mm * Folding A-frame sign at the rear * Rear impact protection buffer ----Electrical System / Lighting: * EBS multi-voltage system for towing vehicles with 12 & 24V electrical systems * 15-pole 24V power socket * LED lighting system for 12 & 24V * 2 additional LED reversing lights * TPMS (Tire Pressure Monitoring System) ----Suitable for Container Lengths: * For containers from 6,500mm to 7,000mm ----Container Running Surface / Tilting Bridge: * Roller guidance on the outside through flat steel edging with a clear distance of approx. 2,180 mm, in conjunction with 3 centering pieces on each side for container guidance * On the rear side, 2 recessed roller bearings connected to the tilting frame are installed to accommodate and stop the container rollers, with pneumatically operated locking to prevent longitudinal sliding * The positive locking of the roll containers is achieved via a pneumatic cross-locking unit installed in the tilting frame at the front and operable from the outside (single-side operation) * Chassis frame inside with rear-tilting main frame - motor-hydraulic tilting system in a single-cylinder design * Tilting angle 42° * Rubber pads between chassis and tilting frame * Loading of the containers takes place from the front, hot-dip galvanized chassis ----Tires: * Single tires 385/55 R 22.5 ----Loading Height: * Unloaded, approx. 1,270 mm ----Painting: * Underrun protection and locking parts (without topcoat) * Bogie, air tank, axles, swivel ring, and drawbar painted in a black color * Hot-dip galvanized ----Information: Ncedpfjx Ipa Ajx Al Dsw * For container transport according to DIN 30722 Part 1 * New vehicle without initial registration, with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Immediately available from Egestorf

Condition: new, maximum load weight: 8,800 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,370 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 11.9: ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes, 2 x 5.5 t ----Axles: * Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange towing eye ----General Attachments: * Jost landing gear at front * External foldable support legs at rear * Plastic toolbox on the front right outside, mounted on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * TPMS (tire pressure monitoring system) * LED lighting ----Loading Platform: * Loading area 5.37 m * 50 mm softwood floor * Bolt-on bulkhead made of flat sheet metal * Side walls made of trapetzoidal-profiled steel, foldable with drop-side spring assist * Rear wall made of steel, can be slid between the ramp holders for storage in front of the bulkhead when not in use * Rear stakes bolted ----Load Securing: * Outer frame with perforations, bent approx. 45 degrees, lashing capacity 2 t every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible * In each front and rear corner, one lashing ring, 6.3 t each * Various holes in the bulkhead and rear crossmember for 1.2 t lashing options ----Ramps: * One-piece mechanical grid ramps with spring system for single-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Rear approach angle approx. 860 mm from chassis ----Tyres: Ncodel Th Ncepfx Al Djw * Tyres 235/75 R 17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Drawbar, bulkhead, tailgate, foldable supports, and drive-on ramps hot-dip galvanized * Axles, springs, air tanks, and 40 mm flange towing eye painted in black shade * Side wall paintwork in RAL2011 deep orange * Custom color paintwork for side panels available for an additional charge ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately from Egestorf

Condition: new, maximum load weight: 8,870 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 11.9: Nodpfx Asrvvfwsl Decw ----Brakes: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 2 x 5.5 ton BPW axles ----Suspension: * Parabolic springs with equalizer ----Drawbar / Flange coupling: * Height-adjustable drawbar by 300 mm * 40 mm flange coupling ----General components: * Jost support leg at the front * Outboard, hot-dip galvanized folding supports at the rear * Plastic quarter fenders * Plastic toolbox at the front right on the front panel ----Electrical system / Lighting: * TPMS tire pressure monitoring system * LED lighting ----Loading platform: * Loading platform 6.27 m * Suitable for container transport * 50 mm softwood floor * Provision on the front panel for subsequent installation of container locking mechanisms * Bolted front panel made of smooth sheet metal * Side walls made of trapezoid-profiled steel sheet, foldable with spring-loaded side rails * Steel rear wall can be slid in between the ramp supports when not in use, positioned inside the front panel * Rear crossbars bolted ----Load securing: * Perforated outer frame, angled at approx. 45 degrees, with a lashing force of 2 tons every 480 mm * Installation of 3-ton lashing eyes possible every 600 mm * One 6.3-ton lashing eye at each corner at the front and rear * Various holes in the front and end beams for 1.2-ton lashing options ----Ramps: * One-piece mechanical loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Approach angle at the rear, approx. 860 mm ----Tires: * Tires: 235/75R17.5 ----Wheelbase: * Wheelbase: 990 mm ----Painting: * Hot-dip galvanized chassis, drawbar, front panel, rear wall, rear crossbars and loading ramps * Painting of the side rails in RAL 9010 pure white * Painting of the side walls in a RAL color is possible for an extra charge ----Information: * Errors and prior sale subject to change * New vehicle with manufacturer's warranty ----Delivery time: * Available for immediate delivery from Egestorf