Used working platform trailers for sale (69)

Condition: as good as new (ex-display), machine/vehicle number: AHW MT3080, overall weight: 3,000 kg, loading space length: 3,080 mm, loading space width: 1,520 mm, ANHÄNGERWIRTZ: The Online Pickup Market for Your New Trailer—offering top brand models ready to go! - Over 850 new trailers in stock - Over 100 used trailers always available - Over 150 vehicle transporters in popular configurations with extensive accessories in stock Non-binding example: exhibition trailer ready for pickup: Brenderup Machine Transporter MT 3080 GD, 308x152cm, 3000kg, low-loader with tandem axle and V-drawbar, rear ramp as a tailgate with support leg 13-pin plastic connector, 14-inch tires Jockey wheel, 6 internal lashing eyes / 400 daN Excavator bucket holder Non-slip fender coating and step Hot-dip galvanized, high-quality, robust anti-slip plywood floor Itedpfx Aeyrbnfjdwsd Sturdy metal wheel chocks, position lighting Recessed lights Spare wheel including bracket under the bucket holder The largest selection of transporters available immediately Sales: telephone orders accepted during the day, or 24/7 via our trailer shop Images and descriptions of this advert are protected by copyright—logos are trademark protected. 03/26 39033

Condition: new, maximum load weight: 16,500 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, Year of construction: 2026, Equipment: ABS, tail-lift, Müller-Mitteltal ETÜ-TAR 21 Tandem - Low-loader | Drive-over Platform Trailer Ref. for inquiries: 11630 Vehicle available immediately from Alsdorf warehouse NEW VEHICLE incl. COC (Certificate of Conformity) * Gross weight: 21t, Payload: 16.5t, galvanized chassis * Available end of March 2026 * Platform version with 400mm high front wall, ramp locking via ramp holding rods and inclined support * Version GG 21t, reinforced frame and axle with axle spacing 1,810 mm * Deck height approx. 910 mm loaded / approx. 940 mm unloaded * 7m loading area with 400mm high front wall * Extended ramps: 3m one-piece, hot-dip galvanized ramps with hot-dip galvanized grating * Ramp lifters with vertically mounted adjustable springs for easy single-person operation * Load securing package: * 4 UVV drop-down lashing brackets (LC 8,000 daN), mounted in existing hole pattern on the 45° outer frame, positioned approx. 1m from front/rear cross member * 10 UVV retractable lashing brackets (LC 3,000 daN) recessed in the existing hole grid of the outer frame * 2 UVV lashing rings front & rear recessed in the cross member, each with LC 10,000 daN * Additional lashing options via holes (Ø 50mm, LC 1,200 daN) in the front and end cross beam * Preparation for retrofitting container locks (container locks available at extra charge) * Softwood floor, 50mm thick * Air suspension, Gigant axles incl. EBS 2S/2M, raising and lowering * Tyres: 235/75R 17.5 (8 twin tires) with tire pressure monitoring sensor * Plastic toolbox in front of the front wall, right side in direction of travel * LED lighting system * 7-pin socket at the rear, pre-wired for overlength lighting with tail light (58 R) and ground * 2 LED reverse lights at the rear * Flashing side marker lights * Oversize warning panel * 1 removable LED beacon incl. holder and installation * Drop-down supports at the rear, front support foot with geared winch ---- Hire-purchase example from our partner MMV Leasing: €655/month (net) for 60 months, no down payment, and €0 final installment Iodpfx Adoyvxg Ujwotd Other terms available with/without down payment or residual value. We are an official Müller-Mitteltal dealer ---- * Our business hours: * Monday to Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 * Outside opening hours by appointment We speak German, English, Russian, Polish, and French * WhatsApp

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: * EBS brake system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle compensation * Lateral underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign boards at front and rear * Closed plastic mudguards at the front axle and straight galvanized steel splash aprons at the rear axle, each with mud flaps * Side and rear reflective contour marking tape * Hinged cover (hot-dip galvanized) for toolbox in the turntable platform * Multi-voltage system * LED tail lights * Removable beacon at rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin power connector * 4 stake pockets on each side (stakes not included) with integrated lashing points * Load securing package consisting of: 2 lashing eyes (6.4 t) at front left & right on the main frame of the turntable platform, 5 pairs of UVV folding & lowering lashing rings, loadable in all directions and recessed into the outer frame – 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for a total width of 3 m (not at the rear taper) * Widening boards stored in the center of the loading area * Excavator arm rest over rear axle up to end cross member approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side of the excavator arm rest) * Mechanical one-piece loading ramps with spring mechanism (approx. 3,000 x 720 mm) * Mechanically controlled lateral ramp adjustment * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm approach angle) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Technically possible gross weight of 30,000 kg-- Ijdpex Ipa Njfx Adwotd * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Condition: new, maximum load weight: 12,451 kg, overall weight: 16,000 kg, axle configuration: 3 axles, Year of construction: 2025, Equipment: ABS, * Extendable loading area * Knorr air brake system * 3 axles with drum brakes * Front and rear grilles ----* Tire size: * Technical gross weight: 16,000 kg * Unladen weight: 3,540 kg * Overall length: ----Vehicle number: 11937----Subject to errors and prior sale----Advertisement and various lettering have been digitally removed. -----We are happy to assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions and we will take care of them for you. Among other services, we can offer you the following for an additional fee:----Trade-in of your old vehicle TÜV/SP inspection Complete export processing Financing arrangements Assistance with export license plates Transport of vehicles Vehicle registration Itodpfx Aeyvnwiedwjd Recovery and vehicle transport---- YOUR VTS TEAM

Condition: used, maximum load weight: 1,007 kg, overall weight: 1,500 kg, axle configuration: 1 axle, first registration: 03/2026, loading space length: 3,070 mm, loading space width: 1,870 mm, loading space height: 100 mm, total width: 1,960 mm, total height: 925 mm, A66 GW26NG000373 100 km/h type approval Platform trailer Support wheel Loading ramps Errors and prior sale reserved Ijdoyq U Enjpfx Adwstd

Condition: used, maximum load weight: 2,186 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 3,005 mm, loading space width: 1,400 mm, loading space height: 200 mm, total width: 2,035 mm, total height: 2,130 mm, A45 GW26G000189, Construction machinery transporter, manufacturer STEMA, type BMAT .2, gross weight: 2,700 kg, with steel loading ramps, inertia braked, 100 km/h approval, 3.01 m x 1.40 m platform. Equipped with 100 km/h shock absorbers* Tandem low-loader chassis available with either STEMA V-drawbar or central tube drawbar * Welded and hot-dip galvanized chassis made from heavy-duty steel sheet * Front and side walls made of 3 mm welded black steel sheet * 20 cm high welded drop sides * Continuous phenolic plywood floor (18 mm thick), optionally with additional aluminum chequer plate floor (3 mm thick) * Walk-on steel mudguards for easy access * 2 longitudinal beams for optimal load distribution ...and much more. Iodpfxsyqdqmj Adwjtd Errors and prior sale excepted.

Condition: new, maximum load weight: 23,940 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2025, * T3 Profi 30.0: * EBS brake system * RDÜ tire pressure monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 ton Gigant axles * Parabolic springs, mechanical axle compensation at the rear * Side underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning plate packages at front and rear * Front axle: closed plastic mudguards; rear axle: straight, galvanized steel skirts, each with spray protection * Side and rear reflective contour tape * Tool box made of galvanized sheet steel, black powder-coated, approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for the tool box on the turntable platform * Multi-voltage electrical system * LED tail lights * Removable rotating beacon at rear * Coupling arm with 50 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pole power connector * Four stake pockets per side (no stakes included), with integrated lashing points * Load securing package comprising: 2 lashing eyes (6.4 t) at front left & right on the main frame of the turntable platform, 6 pairs of swiveling and lowerable UVV lashing rings, loadable in all directions and recessed into the outer frame – 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m overall width (not in the rear slope) * Widening planks stowed in the center of the loading platform * One-piece hot-dip galvanized hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically adjustable sideways * 4-way control block for retrofitting hydraulic side ramp shift * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height: approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height: approx. 910 mm (including 860 mm approach angle) * Chassis, turntable, towing arm and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * Approx. 5,980 kg unladen weight * Technical permissible gross weight: 30,000 kg * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from CW 11/2026 Itjdpfxel Th I Ae Adwjd

Condition: new, maximum load weight: 30,740 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Year of construction: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting and lowering device and RtR valve * SmarD on-board system for load weight determination * Warning sign packages front & rear * Reflective contour tape on sides and rear * Removable rotating beacon at the rear * LED lights * Straight drawbar with 50 mm towing eye and infinitely adjustable height * Tool box made of powder-coated steel and spare wheel holder in basket design, mounted on the right side * Enclosed plastic single fenders at the front * Straight steel mudguards at the rear, each with spray suppression (anti-spray system) * Side underrun protection * Turntable platform extended by 520 mm with 45° corners and 3 integrated storage compartments incl. cover, lockable * Chassis made of high-strength fine-grained steel * Floor over turntable platform made of 50 mm softwood, in the low-bed platform made of 60 mm softwood * Outer planks of the loading ramps made of hardwood * 4 stake pockets on each side (no stakes included) with simultaneous 2 t lashing point per pocket * Load securing package consisting of: 2 lashing points 6.4 t at the front left and right on the main frame of the turntable platform * 2 pairs of 13.4 t lashing rings each at the outer frame front and rear, as well as 4 pairs of 10 t lashing rings per side, swiveling and retractable * Loadable in all directions and recessed into the outer frame * 2 pairs of 6.4 t lashing rings in the excavator arm rest area * 8 pairs of galvanized swing-out marker boards for 3 m total width (not at the rear slope) * Widening planks stored in a compartment on the left side * Excavator arm rest above rear axle up to end of approach ramp approx. 2,100 x 740 x 190 mm * Mechanical drop-down supports at the rear * Hydraulic folding ramps with hydraulically adjustable tip, approx. 4,650 x 720 mm incl. hydraulic lateral ramp shifting and load-holding valve * Loading area across the turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height loaded: approx. 890 mm, +/- 20 mm (incl. 860 mm approach slope) * Flow divider installed Iodpfx Aol Tik Nedwotd * Chassis, turntable, access ramps, flip-out marker boards and mechanical drop-down supports hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in black * Tires: 235/75 R 17.5 * New vehicle without first registration, with manufacturer warranty * Subject to errors and prior sale * Immediately available ex Egestorf on the A7

Condition: used, maximum load weight: 2,775 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 3,530 mm, loading space width: 1,650 mm, total width: 2,435 mm, total height: 2,130 mm, A15 GW26MG00273 Construction machinery transporter, Manufacturer A, model BMAT, gross weight: 3,500 kg, low-loader, overrun braked, 100 km/h, with aluminium ramps, 3.53 m x 1.65 m ...and much more. Subject to errors and prior sale. Itsdeym Ihzjpfx Adwod

Condition: used, maximum load weight: 949 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 02/2026, loading space length: 4,010 mm, loading space width: 188 mm, loading space height: 110 mm, total width: 2,450 mm, total height: 860 mm, A13 GW2616429 Multi-transporter 4018, manuf. TEMARED, type DMC Gross weight: 1300 kg, 400x184 cm, overrun braked, 100 km/h (accessory), with foldable loading ramp (accessory), low loader, height-adjustable Loading height: 400 mm Subject to errors and prior sale Iodpfx Adoym Igdjwotd

Condition: used, maximum load weight: 2,775 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 3,530 mm, loading space width: 1,650 mm, total width: 2,435 mm, total height: 2,130 mm, A15 GW26NG00315 Construction machinery transporter, manufacturer STEMA, model BMAT, total weight: 3,500 kg, low-loader, with overrun brake, 100 km/h, equipped with aluminium ramps, 3.53 m x 1.65 m ...and much more. Subject to errors and prior sale. Loading height: 500 mm. Ijdpfxeym Ifts Adwotd

Condition: used, maximum load weight: 2,649 kg, overall weight: 3,500 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 4,005 mm, loading space width: 1,800 mm, total width: 2,435 mm, total height: 2,130 mm, A14 GW26GA00002 Construction machinery transporter by STEMA, model BMAT .2, gross weight: 3,500 kg, low-loader, with overrun brake, 100 km/h, equipped with steel ramps, tiltable, 4 m x 1.80 m ...and much more. Errors and interim sale excepted. Itodpfsym Ifaox Adwjd

Condition: used, maximum load weight: 31,250 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 07/2014, next inspection (TÜV): 03/2026, loading space length: 9,010 mm, loading space height: 900 mm, total width: 2,550 mm, Year of construction: 2014, Equipment: ABS, 4-Axle Schwarzmüller T4 Low Loader Trailer VIN: EZ346388 Chassis / Attachments: * Leaf suspension * 4 x SAF axles with drum brakes * Tyres: 235/75 R 17.5 * Tyre tread depth: 1st ~60% 2nd ~60% 3rd ~60% 4th ~50/20% Body: * Total length: 9.1 m * Extendable side extensions (up to 3.0 m) * Ride height: 0.90 m * Hydraulic loading ramps with lateral shift * Various lashing points available Weights: * Gross weight: 40,000 kg * Unladen weight: 8,750 kg * Payload: 31,250 kg Miscellaneous: * German vehicle Ijdpsyumbvofx Adwotd * 1 previous owner * General Inspection / Safety Inspection valid until 09/2026 * New general inspection available upon request ---- New general inspections, safety inspections, or weight downgrades/upgrades available on request. We are happy to assist you in obtaining export/transfer license plates, and can also transfer your purchased vehicle anywhere within Germany. Contact us! ---- We speak the following languages: German, English, and Russian! ---- No liability for printing or typographical errors. Subject to changes, prior sale, and mistakes! ---- Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With many years of experience in reconditioning and distributing commercial vehicles, we are a reliable partner for customers worldwide. Our special strength lies in the sale of new and used commercial vehicles. On 11,000 sqm you will find a wide selection of vehicles. Our company philosophy is characterised by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an outstanding all-round service package with a competent contact person who will assist you with the purchase or sale of vehicles. Convince yourself! Our services for you: Vehicle loading We are happy to help you load your purchased vehicles. Organising special transports We can assist you in organising special transports. Temporary / Export license plates We will gladly help you obtain export or short-term license plates.

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: * EBS braking system * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation at the rear * Side underrun protection * Swivel support legs at the rear of the chassis frame * Mechanically adjustable warning sign packages at front and rear * Front axle with closed plastic mudguards, rear axle with straight galvanized steel skirts, each with splash protection * Reflective contour tape on the sides and rear * Folding lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable beacon at rear * Drawbar with 40 mm towing eye, height adjustment via tension spring and turnbuckle * 15-pin electrical connector Ijdsx Ipb Hopfx Adwetd * Four stake pockets per side (no stakes provided), each also suitable as lashing points * Load securing package including: 2 lashing rings (6.4 t) at the front left & right on the main frame of the turntable platform, 5 pairs of UVV-compliant lashing rings, swiveling and retractable, loadable in all directions and recessed into the outer frame—13.4 t in corners, otherwise 10 t * 6 pairs of mechanical swing-out extensions for 3 m overall width (excluding the rear slope) * Widening boards stored in the center of the loading area * Excavator arm rest above rear axle up to end crossmember approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides in the excavator arm rest) * Hydraulic one-piece loading ramps (approx. 3,000 x 720 mm) * Hydraulic lateral ramp displacement * Loading area above turntable: approx. 1,960 x 2,520 mm * Loading height unladen approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Loading height unladen approx. 910 mm (including 860 mm drive-on slope) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * Unladen weight: 5,900 kg * --Technical permissible total weight of 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex works Egestorf on the A7

Condition: used, functionality: fully functional, machine/vehicle number: W09K35135G1KB6013, Year of construction: 2016, operating hours: 1,823 h, TÜV valid until 08/2026, new inspection available upon request. Includes matching accessories: grab, debris bucket, hanging cage. Itodpfx Asyt Hhmedwod

Condition: new, maximum load weight: 10,950 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TA-ER 14.4 Platform: ----Braking system: * EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: Itedpfxev D Tbks Adwsd * 2 x 7 t BPW axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange Coupling Eye: * Height-adjustable drawbar (approx. 300 mm) * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in B dimension approx. 8,080 mm) * 40 mm flange coupling eye ---- Electrical system / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 additional LED reversing lights at the rear (activated via reverse gear) * 1 LED beacon (removable incl. bracket) at the rear * TPMS (tire pressure monitoring system) ----General attachments: * Mechanically adjustable 3-meter warning panel sets front and rear * Front landing gear * Rear fold-out support legs (external) * Plastic toolboxes approx. 750 x 350 x 300 mm on both left & right sides * Side underrun protection * Rear underrun protection * Plastic quarter mudguards ----Loading platform: * 400 mm high bolted front wall * 50 mm softwood flooring * 2 pairs of container locks (extendable for 3 m container external width) and lockable, locking measure retracted per ISO - DIN 15190 = 2,259 mm. Container locks extended = 2,819 mm (not DIN compliant) with an absolute external width of 3,000 mm ----Load securing: * Perforated external frame, approx. 45° edged, with 2 t lashing capacity every 480 mm * Option for installing 3 t folding lashing brackets every 600 mm - each side fitted with 5 x 3 t UVV lashing brackets * In each corner, at the front and rear: 1 x 6.3 t lashing ring (front directly behind container locks in wooden floor, rear in end beam) * Various holes in the front and rear beams for 1.2 t lashing options ----Ramps: * 1 pair of aluminium slide-in ramps approx. 3,570 x 410 mm (load capacity 10 t/pair), suitable for rubber-tired and tracked vehicles * Stowage compartment for ramps recessed in the chassis underneath the loading deck, accessible from the rear ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection and rear supports hot-dip galvanized--- * Axles, air tanks, front landing gear and flange coupling eye painted in black shade ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available from calendar week 09/2026

Condition: used, axle configuration: 2 axles, first registration: 06/1998, loading space length: 4,300 mm, loading space width: 2,400 mm, loading space height: 850 mm, 2-axle BlomenRöhr Platform Trailer SDAH 8.5T First registration: 06/1998 Manufacturer: BlomenRöhr Leaf suspension Tyres: 215/75 R17 Length: 6240 mm / Height: 2360 mm No MOT (TÜV) Further special equipment, data, or images available upon request! Details provided without guarantee/errors excepted! Information given online is non-binding and does not constitute guaranteed features. The seller is not liable for errors, input mistakes, or data transmission errors. Subject to change. Continuous purchase and sale as well as trade-in and rental Ijdpsv Ridhofx Adwetd of municipal technology / disposal and cleaning vehicles for sewer cleaning, wet and hazardous goods disposal.

Condition: used, functionality: fully functional, machine/vehicle number: 2476988, overall weight: 1,635 kg, loading space length: 1,300 mm, loading space width: 700 mm, total length: 5,960 mm, total width: 1,780 mm, total height: 2,160 mm, color: white, Year of construction: 2013, Technical Data Year of manufacture: 2013 Drive: Electric Working height: 13.50 m Platform height: 11.50 m Lateral outreach: 9.10 m Iodpfxsx Tn Ddj Adwotd Outrigger width: 3.8 m / 4.20 m Slew range: continuous Control: proportional Platform size: 0.70 m x 1.30 m Overall dimensions (L x W x H): 5.96 m x 1.78 m x 2.16 m Basket load capacity: 215 kg Basket rotation: 90° Weight: 1,635 kg Gradeability: 25% Fully functional Technically inspected Normal signs of use Delivery possible on request Rental possible on request

Condition: used, overall weight: 2,000 kg, first registration: 08/1995, Trailer with frame for advertising banners or for transporting goods Location: Im Erlenkamp 15 Itjdsynvdmjpfx Adwed

Condition: new, machine/vehicle number: AHW BJT DP2700, empty load weight: 505 kg, maximum load weight: 2,195 kg, overall weight: 2,700 kg, loading space length: 2,800 mm, loading space width: 1,300 mm, Immediately available for platform or mini excavator transport\nMachine transporter Cargo Digger Plant 2 280x130x15cm 2,700kg Model LED lights\nTandem low-loader V chassis – overrun braked – 14" tyres – loading height 38cm – galvanized steel body with perforated steel floor, DIN lashing brackets – bucket rest installed – foldable and sliding steel ramps, support wheel...\nBook a pickup appointment now by calling 02182 699 0 690, Monday to Friday\n02.26 \ 543-0110VERSION29002 Itjdsyhl Sgopfx Adwjd

Condition: new, maximum load weight: 10,950 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2026, Equipment: ABS, tail-lift, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem | Low Loader | Flatbed | Trailer Available immediately | Reference number for inquiries: 11611 | Delivery to your address possible * We are happy to offer you an individual quote Itsdpfxjyndh Hj Adwed * ---- * Gross weight: 14.4 t, Payload: 10.95 t * LED lighting system * GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs * Tire pressure monitoring system (TPMS) * 6.27m x 2.47m flatbed with galvanized 400 mm front wall * Digger bucket support made of hardwood, bolted to the front wall * Platform height unladen: 930 mm / laden: 870 mm * One-piece ramps with hot-dip galvanized anti-slip grating, telescopic down to approx. 20 mm, secured with support bars and inclined bracing * Ramp assist with vertically mounted, adjustable springs for easy single-person operation * 4 UVV drop lashing rings (LC 6300 daN) * Perforated outer frame (45°-bent with perforation for lashings, lashing capacity per point LC 2000 daN at least 480 mm apart. Installation of drop lashing rings LC 3000 daN at approx. 600 mm spacing possible) with close-spaced transverse profiling, high-profile front and rear ends, rear loading ramp, hot-dip galvanized * 10 UVV lashing rings LC 3000 daN recessed in existing grid in the outer frame, additionally * Further lashing options via boreholes (Ø 50 mm, LC 1200 daN) in the front and rear crossmembers * Tool box in front of the front wall * Side marker lights with indicator function * 50 mm thick softwood floor, chassis hot-dip galvanized * Height-adjustable landing gear at the front, foldable supports at the rear * Retrofitting of 2 container twistlocks possible * Drawbar with 40 mm draw eye (hot-dip galvanized), height adjustable, 50 mm eye available on request * 1 removable LED marker lamp at the rear ---- * Leasing, hire purchase, financing, trade-in possible * e.g. from 510 euros over 60 months, no down payment, no residual value * ---- * Our opening hours: * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 Outside of opening hours we are available by appointment We speak German, English, Polish, and French Leasing, financing, and trade-in possible

Condition: new, maximum load weight: 20,500 kg, overall weight: 27,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TR 27.0 Platform: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with lift and lower system featuring RTR function * First axle liftable * Last axle as trailing steering axle with electro-pneumatic locking via reverse gear PIN (locking of the trailing axle from the tractor unit for maneuvering purposes – no truck-side installation required – assigned to PIN 10 in the 15-pin connector, for maneuvering purposes only, not for public road use) * SmartBoard control box as infotool with pressure sensors for total axle load display * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * Fixed central drawbar with 50 mm flange eye (loaded 900 mm, vertical adjustment at the head plate) * Mechanical landing gear at the front, mechanical swing-down supports at the rear of the chassis * Hydraulic flow divider * Continuous side walls (without central stanchion) up to the drive-on ramp * Folding rear stanchions * Steel rear wall inserted in front of the rear stanchions * Mechanically adjustable warning sign package at front and rear * Toolboxes made of galvanized sheet steel – black powder-coated – approx. 650 x 300 x 600 mm, right side * 15-pin electric connector * LED tail lights * Removable LED beacon, incl. bracket and installation * 2 x LED reverse lights at the rear of the vehicle (switched via reverse gear) * Flashing LED side marker lights * 60 mm larch / Douglas fir wooden floor * 400 mm slotted steel front wall * Perforated outer frame approx. 45° angled with devices to mount 3 t folding lashing rings * In each corner 1 x 10 t lashing ring, plus on each side 2 x 10 t and 3 x 6.3 t lashing rings * Various holes in the front and rear cross members for 1.2 t lashing options * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm, mechanically adjustable sideways * 4-section hydraulic control block for possible retrofitting of hydraulic ramp shift Itsdpfxjr Dpzxj Adwed * Chassis, drawbar, front wall, mechanical rear supports, loading ramps hot-dip galvanized * Axles, air tanks, flange drawbar eye and front landing gear painted in black * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck from over 40 l/min up to 120 l/min) * New vehicle with manufacturer warranty * Errors and prior sale reserved * Available from CW 13/2026 * Sample images (Pictures may differ from the actual vehicle due to special equipment)

Condition: new, maximum load weight: 16,400 kg, overall weight: 30,000 kg, axle configuration: 3 axles, Year of construction: 2024, * T3 Profile 30.0: * EBS-E (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release device for spring-actuated cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Air suspension with lift and lowering system * SmartBoard as an information tool on the trailer with pressure sensors to display total axle load per axle group * Side underrun protection * Mechanically adjustable warning sign packages, front and rear * Front axle closed plastic mudguards and rear axle straight galvanized steel splash guards, each with spray protection * Hinged lid (hot-dip galvanized) for the toolbox located on the turntable platform * Toolbox made of approx. 650 x 300 x 600 mm galvanized steel (black powder-coated), mounted on the right side * 15-pin power connector * LED lighting 12 / 24 V * Removable LED beacon at rear * Side marker lights with indicator control * Tow bar with 40 mm drawbar eye and height adjustment via draw spring & turnbuckle * Tire pressure monitoring system with indication in the truck via EBS signal (no truck-side installation required) * Rubber coating on the folding ramps and on the approach slope, left and right (approx. 860 mm long) * Rubber coating on longitudinal beams from front bulkhead to rear crossmember * Hardwood flooring on the running surfaces of the low-loader platform * Four stake pockets per side, each with 2 t lashing option * Load securing package consisting of: 5 pairs of UVV lashing rings, swivel and retractable, loadable in all directions and recessed in the outer frame – 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical swing-out extensions for 3 m total width (not available on the rear slope) * Board holder mounted longitudinally below the loading area * Roller stop raised in front of bulkhead, with one 6.4 t lashing ring per side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable ramp tip and load-holding valves * Hydraulic lateral ramp displacement * Rear support hydraulically operated (single-stage cylinder) * Hydraulic flow divider in the trailer (for hydraulic pump output in truck from over 40 l/min up to max. 140 l/min) * Hydraulic control block splash-proof * Dual-circuit hydraulic system * Loading area above turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (including 860 mm approach slope) Ijdsq Dyvcepfx Adwetd * Loaded deck height approx. 890 mm +/- 20 mm (air suspension) * Chassis, turntable, roller stop, swing-out wideners and loading ramps hot-dip galvanized * Axles, turntable, drawbar, air reservoirs etc. painted in black * Loaded deck height: approx. 890 mm +/- 20 mm * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from week 20/2026

Condition: new, maximum load weight: 31,900 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Year of construction: 2026, Equipment: ABS, T 4 Profi 40.0 ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 4 x 11 t Gigant axles ----Suspension: * Air suspension with lift/lower function and RtR valve ----Drawbar: * Straight drawbar with 50 mm towing eye and infinitely adjustable height setting ----Electrical / Lighting: * Tire pressure monitoring system with display option in the truck dashboard via EBS signal (no truck-side installation required) * SmartBoard as an infotool with pressure sensors for axle load indication by axle group * 15-pin power connector * LED tail lights * Removable LED beacon at the rear ----General Attachments: * Warning sign packages front & rear * 2 x toolboxes made of galvanized and powder-coated steel approx. 650 x 300 x 600 mm, mounted on the right side * Front closed plastic single mudguards * Rear straight steel splash guards each with spray suppression * Side underrun protection ----Low-loader Platform: * Rotary-platform extension by 520 mm with 45° corners and 3 integrated storage compartments incl. lockable covers * Flooring over rotary-platform from 50 mm and on low-loader platform from 60 mm softwood * 20 mm rubber flooring instead of timber in the deck area, low-loader length 6,780 mm including access ramp * Rubber flooring on upper access slope left and right, approx. 860 mm long * Each side with 4 stake pockets (no stakes included), 2 t lashing option per pocket ----Chassis: * Chassis made of high-strength fine-grain steel ----Load Securing (Lashing Package): Rotary-platform: * 2 pairs 13.4 t lashing rings in the outer frame of the rotary-platform Iodpsylfvmsfx Adwstd Low-bed: * Each side with 4 pairs 10 t retractable lashing rings on the outer frame, loadable in all directions * Each side rear with 2 pairs 13.4 t swing-away lashing rings ----Ramps: * Rubber surfacing on foldable loading ramps * Hydraulic folding ramps with hydraulically deployable ramp tips, approx. 4,650 x 720 mm * Hydraulic lateral ramp adjustment & load-holding valves ----Rear Support: * Hydraulic rear support ----Widening: * 8 pairs galvanized folding outriggers for 3 m overall width (not on rear ramp slope) * Extension planks stored in compartment on left side ----Excavator Arm Rest: * Excavator arm rest above rear axle to end of ramp, approx. L=2,100 mm x W=740 mm x H=190 mm * 2 pairs 6.4 t lashing rings on side of excavator arm rest ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output in truck over 40 up to max. 120 l/min) ----Loading dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm ramp) * Area above turntable: approx. 2,990 x 2,520 mm ----Loading height: * Loaded: approx. 890 mm, +/- 20 mm ----Paintwork: * Reflective contour markings on sides and rear * Chassis, rotary-platform, ramps, and folding outriggers hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in black tone ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images may show special equipment ----Delivery time: * Vehicle available from approx. week 23/2026

Condition: new, maximum load weight: 10,900 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, ETÜ-TA-R 14.4 ----Braking system: * EBS electronic braking system * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Tow bar / Flange eye: * Tow bar height-adjustable by 300 mm * Tow bar extension by 250 mm to 2,250 mm * 40 mm flange towing eye ----Lighting / Electrics: * RDÜ (tyre pressure monitoring system) * LED tail lights 12 / 24 V * 15-pin power connector Itsdpfeq Dyvyox Adwjd ----General attachments: * Jost landing gear front * Externally mounted, hot-dip galvanized folding supports at rear * Plastic toolbox, front right, mounted on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood floor * Fittings in front of bulkhead for retrofitting container locks * Bolted flat sheet steel bulkhead * Drop sides made of trapezoidal-profiled steel sheet, folding with drop side lifting springs * Rear steel wall retractable between ramp holders, stowable in front of bulkhead when not in use * Bolted rear stanchions * Rear drive-on slope approx. 860 mm ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing force every 480 mm * Option to install 3 t folding lashing brackets every 600 mm * 1 x 6.3 t lashing ring in each front and rear corner * Various drillings for 1.2 t lashing points in front bulkhead and rear end crossmember ----Ramps: * One-piece, mechanical mesh ramps with spring assist for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm) ----Paintwork: * Hot-dip galvanized chassis as well as tow bar, bulkhead, tailgate, and access ramps * Sideboard colour in RAL 9010 pure white * Painting of side walls in alternative RAL colours available at extra cost ----Info: * --Reinforced and certified body built according to EN 12642 XL including load securing certificate-- * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex Egestorf