Used Müller-Mitteltal Lowbed Semitrailers for sale (259)

Condition: new, maximum load weight: 30,080 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Year of construction: 2026, * T4 RM 40.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display capability in the truck via EBS signal (no truck-side installation required) * Drum brakes * 4 x 11 ton Gigant axles * Air suspension with manual lowering at the rear * Warning sign packages front & rear * SmartBord infotool mounted with pressure sensors for total axle load display per axle group * Side and rear reflective contour tape * Removable LED beacon at the rear * 15-pin power connector * LED tail lights * Straight drawbar with 50 mm towing eye and stepless height adjustment * Closed single plastic mudguards at the front * Straight rear steel mud flaps each with spray suppression * Side underrun protection * Front extension in front of turntable platform approx. 520 mm with 45° corners and 3 storage compartments incl. lockable folding lids (open to the rear) * Chassis made of high-strength fine-grain steel * Floor above turntable platform made of 50 mm softwood and 60 mm softwood on low-bed platform * Outer planks of the ramps made of 50 mm hardwood * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the turntable platform; one pair each (front & rear) of 13.4 t lashing rings on the outer frame; one pair each side of 10 t swivel and lowerable lashing rings, loadable in all directions and integrated in the outer frame; bolted 5 t lashing rings on the outer frames of the wheel wells (2 at the front wheel well, 1 at the rear); 2 pairs of 6.4 t lashing rings at the sides of the excavator boom cradle * 11 pairs of folding outriggers for a total width of 3 meters (not on rear slope) * Storage compartment (L = 2,470 x W = 570 x H = 250 mm) for widening planks made of sheet steel, mounted transverse to the load area in front of the 1st rear axle * Excavator boom cradle above the rear axle to end of incline approx. 2,300 x 740 x 190 mm * 2 wheel wells per side, approx. 640 mm wide – front 340 mm deep, rear 220 mm deep – with sliding cover (storage for covers at the front on the turntable platform) for transporting wheel loaders with 3,100 - 3,640 mm wheelbase Redexmpydopfx Ahuebw * Mechanical drop-down supports at the rear * Hydraulic folding ramps with hydraulically deployable tip section approx. 4,650 x 720 mm * Hydraulic lateral ramp shift * Loading area above fifth wheel: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm, loaded height approx. 890 mm +/- 20 mm (incl. 860 mm approach slope) * Chassis, turntable, folding outriggers, rear supports, and ramps hot-dip galvanized * Axles, air tanks, and drawbar painted black * Tires: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Subject to change and prior sale * Immediately available ex Egestorf

Condition: new, maximum load weight: 30,080 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Year of construction: 2026, * T4 RM 40.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required * Drum brakes * 4 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Warning sign packages front and rear * SmartBord infotool installed with pressure sensors for displaying total axle load per axle group * Reflective contour tape on the sides and rear * Removable LED rotating beacon at the rear * 15-pin power connector * LED tail lights * Straight drawbar with 50 mm towing eye and stepless height adjustment * Front closed single plastic mudguards * Rear straight steel mud flaps each with splash guards (spray suppression) * Side underrun protection * Front extension in front of the bogie platform approx. 520 mm with 45° corners and 3 storage compartments including lockable hinged covers (covers open to the rear) * Chassis made of high strength fine-grain steel * Floor over bogie platform made of 50 mm softwood and 60 mm on the lowbed platform * Outer planks of the loading ramps made of 50 mm hardwood * Lashing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the bogie platform, side front and rear each 1 pair of 13.4 t lashing rings on the outer frame, and side each 1 pair of 10 t lashing rings, swiveling and lowerable, loadable in all directions and recessed into the outer frame, bolted 5 t lashing rings to the outer frames of the wheel wells (2 at the front wheel well and 1 at the rear), 2 pairs of 6.4 t lashing rings at the side in the excavator arm rest * 11 pairs of folding outriggers for 3 m total width (except on rear slope) Rsdpfxoxmpyks Ahusbw * Storage compartment (L = 2,470 x W = 570 x H = 250 mm) for the widening planks made of steel sheet, mounted transversely to the loading platform in front of the 1st rear axle * Excavator arm rest above the rear axle to the end of the drive-up slope, approx. 2,300 x 740 x 190 mm * Each side with 2 wheel wells approx. 640 mm wide – front 340 mm deep, rear 220 mm deep – with sliding covers (storage for the covers on the front of the bogie platform) for the transport of wheel loaders with a wheelbase of 3,100 – 3,640 mm * Mechanical drop-down supports at the rear * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp shift * Loading area above the slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm, loaded height approx. 890 mm +/- 20 mm (incl. 860 mm drive-up slope) * Chassis, bogie, folding outriggers, rear drop supports and loading ramps hot-dip galvanized * Axles, air tanks and drawbar painted black * Tires: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Subject to errors and interim sale * Immediately available ex Egestorf

Condition: new, maximum load weight: 38,620 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, Year of construction: 2026, T5 Profile 50.0: ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm when lifted) * Last axle steerable (locking of trailing axle can be performed from the cab for maneuvering purposes, without installation on the truck side, as well as additionally by switch on the trailer); lock must be disengaged before driving on public roads * Forced lifting and forced lowering of the lift axle for maneuvering purposes (truck-side installation required) with speed-dependent control via the EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: * Drawbar 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as infotool with pressure sensors to display total axle load per axle group * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * LED lighting system 12/24 V * Removable LED beacon (rear) ----General Attachments: * Mechanical warning sign package for 3 m total width * Toolbox made of galvanized steel sheet approx. 650 x 300 x 600 mm, mounted left side * Plastic wheel arches front axle and galvanized steel sheet mudguards on rear axle ----Low Loader Platform: * Turntable platform extension with 45° corners and 3 storage compartments with lockable folding lids (lids open to the rear) Rjdexptn Djpfx Ahusbw * Shortened low bed platform by 500 mm to 6,280 mm including extended stepped transition 500 mm forwards * Rubber covering on foldable frame, approach slope, and on the running surface of the low loader platform * Bamboo wood between the longitudinal beams in front of the excavator stick holder ----Load Securing (LaSi Package): * 2 x 6.4 t lashing rings at the front corners * 2 x 13.4 t UVV-compliant lashing points each at the front and rear side corners * 5 x 10 t UVV-compliant lashing rings per side (swiveling and lowerable, loadable in all directions) * 4 stake pockets per side, also 2 t lashing capability * 1 x 16 t UVV-compliant lashing point on the rear cross member ----Widening: * Extendable and foldable widening outriggers for 3 m overall width (board bracket holder under chassis, right side) ----Excavator Stick Holder: * Continuous excavator stick holder with reinforced profile from last axle to end beam, approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV-compliant lashing rings on the sides of the stick holder ----Ramps: * Hydraulic folding ramp with double-acting hydraulics and extendable tip section, approx. 4,650 x 720 mm incl. load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump outputs in the truck above 40 l/min, max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm (via air suspension) ----Loading Area Dimensions: * Deck above turntable: 2,600 + 390 x 2,520 mm * Low bed area: 6,280 + 500 x 2,520 mm incl. 860 mm approach slope ----Paintwork: * Chassis, bogie, drawbar, extension consoles, access ramps hot-dip galvanized * Towing fork, axles, hydraulic axle supports, as well as air tanks painted in black ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: Immediately available*

Condition: new, maximum load weight: 38,620 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, Year of construction: 2026, T5 Profile 50.0: ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11-ton Gigant axles * 3rd axle liftable (ride height +30 mm when axle is lifted) * Last axle self-steering (the steering lock for the trailing axle can be activated from the cab for maneuvering purposes without truck-side installation, as well as additionally by a switch on the trailer); the lock must be deactivated before driving on public roads * Forced lifting and lowering of the lift axle for maneuvering purposes (truck-side installation required) with speed-dependent activation via EBS electronics ----Suspension: * Air suspension with lifting and lowering system, equipped with RtR valve ----Drawbar: * Drawbar, 1,500 mm long with 50 mm towing eye, manual height adjustment ----Electrical / Lighting: * Smartboard info tool with pressure sensors for total axle load display per axle group * Tire pressure monitoring with display capability in the truck via EBS signal (no truck-side installation required) * LED lighting system 12/24 V * Removable LED beacon (rear) ----General Fittings: * Mechanical warning sign package for 3 m overall width * Toolbox, galvanized steel, approx. 650 x 300 x 600 mm, mounted left side * Front plastic fenders and galvanized steel rear mudguards Rbodpfsl Tihuex Ahuew ----Low-loader Area: * Front of turntable platform with 45° corners and 3 storage compartments with lockable flaps (flap opens to rear) * Shortened low-bed platform by 500 mm to 6,280 mm including extended stepped drop by 500 mm to the front * Rubber covering on folding frame, drive-on ramp and platform running surface * Bamboo wood insert between longitudinal members in front of excavator stick rest ----Load Securing (Load Securing Package): * 2 x 6.4 t lashing rings at the front corners * On each side, front and rear corners, 2 x 13.4 t UVV-compliant lashing rings * 5 x 10 t UVV-compliant lashing rings per side (pivotable, retractable, loadable in all directions) * 4 side stake pockets per side with 2 t lashing capability * 1 x 16 t UVV lashing ring on rear crossmember ----Widening: * Extendable and foldable outriggers for up to 3 m overall width (plank holders under chassis on right side) ----Excavator Stick Rest: * Continuous excavator stick rest with reinforced profile from last axle to rear crossmember, approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV lashing rings on the sides of stick rest ----Ramps: * Hydraulic folding ramp with dual-line hydraulics and adjustable ramp tip, approx. 4,650 x 720 mm, including load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulic System: * Hydraulic flow divider (for hydraulic pump flow on truck from over 40 l/min up to 140 l/min max.) ----Loading Height: * Loaded: 890 mm +/- 20 mm by air suspension ----Loading Platform Dimensions: * Platform above fifth wheel: 2,600 + 390 x 2,520 mm * Low-bed platform: 6,280 + 500 x 2,520 mm, including 860 mm drive-on ramp ----Paintwork: * Chassis, turntable, drawbar, widening consoles, drive-on ramps – hot-dip galvanized * Drawbar, axles, hydraulic axle supports and air tanks painted in black ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately *

Condition: new, maximum load weight: 13,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 700 mm, Year of construction: 2026, * KA-TA-RT 18.0: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering system, including ride height control valve (RtR-valve) and manual lowering for loading operations ----Drawbar / Flange Drawbar Eye: * Drawbar with positive lock height adjustment * 50 mm flange drawbar eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12/24 V integrated into underrun protection ----General Attachments: * Landing gear at the front * Outward folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted on right side * Plastic quarter mudguards ----Tipping Body: * Steel pallet - 3-way tipper body made of fine-grained steel, with high M-Strong side walls and reinforced 180 bar tipping cylinder * Fixed front wall made of smooth sheet metal * Hardwood pad for excavator bucket bolted to the front wall * Continuous side walls - without center stanchion - folding with drop-side spring-assisted lifter and pivoted by manual central locking * Bolted rear stanchions * Combination steel swing doors - rear panel, 2-wing asymmetric design, can be swiveled and locked at 270°, not foldable, with additional swing frame for automatic tailgate opening during tipping operations; locking via galvanized rotary bar lock and central locking; deactivation function for automatic tailgate during rearward tipping with open swing door * 4 mm steel floor * Two-step access on front left * Mounting rail at the rear for loading ramps ----Load Securing: * Each corner fitted with 1 x 7 t lashing point * 4 x 3 t lashing rings recessed in the outer frame on each side ----Loading Ramps: * Ramp storage compartment rear integrated in chassis Redpsvin T Ssfx Ahuobw * 1 pair aluminium loading ramps (10 t/pair), approx. 3,570 x 410 mm, suitable for rubber-tyred and tracked vehicles ----Painting: * Chassis, drawbar, rear stanchions, front wall, tipping body, underrun protection, rear folding supports hot-dip galvanized * Side walls - KTL coated - and tailgate painted in RAL 9010 pure white * Side wall painting in another RAL colour available at extra cost * Axles, air tanks, flange drawbar eye, front landing gear painted in a black shade ----Info: * --Load securing certificate according to EN 12642 XL? * Errors and prior sale excepted * Sample images (pictures may vary due to special equipment) ----Delivery Time: * Available from week 15 / 2026

Condition: used, maximum load weight: 15,100 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 03/1987, loading space length: 8,650 mm, loading space width: 2,480 mm, ? Mechanical ramps ? Loading height: approx. 910 mm ? Spare wheel holder Redpeyw Egwjfx Ahuebw ? 40 mm towing eye ? Beacon ? Drum brakes ? Leaf suspension ? 1 x toolbox ? Twin tires ? SAF axles All information without guarantee / Subject to prior sale.

Condition: used, axle configuration: 3 axles, Year of construction: 2018, Equipment: ABS, = Additional Options and Equipment = - EBS - Electronic Braking System - Air suspension rear - Air suspension front = Notes = For vehicle inquiries, Mr. Seidel will be happy to assist you (by phone). Müller-Mitteltal TS 3 PROFI 30.0 Machine Transport Trailer Additional rear work lights, left and right side, BPW axles, Wabco ABS, drum brakes, spring-actuated brakes, 3rd axle steered, hydraulic loading ramp, rear posts extendable to the sides, sliding roof, sliding side curtain, cargo area dimensions: rear to kick-up: L 9,230 mm W 2,490 mm H 3,020 mm, kick-up to bulkhead: L 4,000 mm H 2,470 mm, tire tread: 1st axle 7-11 mm, 2nd axle 9-10 mm, 3rd axle 8-10 mm We will be happy to provide you with a leasing or financing offer on request. Mr. Seidel (phone) is at your service. Further information can be found on our homepage. ... Errors, modifications and prior sale excepted!!! Steering axle = Additional Information = Unladen weight: 11,100 kg Rbedpjyxklujfx Ahuow Payload: 24,900 kg Gross vehicle weight: 36,000 kg Cargo space dimensions (LxWxH): 9,230 x 2,490 x 3,020 mm Contact Tobias Ebert for more information.

Condition: used, maximum load weight: 29,150 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/1996, loading space length: 11,900 mm, loading space width: 2,500 mm, loading space height: 860 mm, total width: 2,500 mm, Gross weight: 39,000 kg Curb weight: 9,850 kg Payload: 29,150 kg Rbjdpfxoywq Hio Ahusw Overall length: 12,300 mm Loading length: 11,900 mm Width: 2,500 mm Loading height: approx. 860 mm Further information - Hydraulic ramps, split, approx. 3,200 mm - Air suspension - SAF axles - Twin tires - Loading length low-bed approx. 8,300 mm - Wheel recesses approx. 490 - 540 mm - Warning signs at the front

Condition: used, axle configuration: 2 axles, Year of construction: 2002, Tipper low-loader combination. Permissible total weight: 10,500 kg, payload: 7,550 kg. 3-way tipper body, approx. 5,000 x 2,420 x 400 mm (internal dimensions), 4 lashing rings, swinging and foldable steel drop sides with central locking. 1 pair of aluminum loading ramps in lockable compartments under the tipper. Loading height (unladen) approx. 900 mm. Two-speed landing gear at the front, foldable supports at the rear. 40 mm towing eye, infinitely height-adjustable drawbar. 2-line air brake, 1-line hydraulic system, 24 volts. BPW axles, parabolic suspension, ABS. Tires: 235-75R17.5. Chassis grey, tipper body green. Inspection (MOT/TÜV) valid until June 2026. Sold as is. Aluminum ramps = Further information = Unladen weight: 2,950 kg Payload: 7,550 kg Gross weight: 10,500 kg Front tires: 235-75R17.5 Redpfxeyw Hw Rj Ahusbw Rear tires: 235-75R17.5 Country of manufacture: DE Please contact Jan-Marc Schwickert for further information.

Condition: used, Year of construction: 1975, Cable drum transport trailer. Permissible total weight 7,200 kg, payload 5,200 kg. Hydraulic pickup and lowering of the cable drum, hydraulic drum drive. Rear stabilizer. Tyres 11.00R20. Towing eye 40 mm, 2-line air brake system, 2-line hydraulic system, 24 V. Sold as is. = Further information = Unladen weight: 2,000 kg Payload: 5,200 kg Gross vehicle weight: 7,200 kg Front tyres: 11.00R20 Rbjdeyw Hgfepfx Ahujw Country of manufacture: DE Contact Jan-Marc Schwickert for further information.

Condition: used, axle configuration: 2 axles, first registration: 04/2005, color: black, Year of construction: 2005, Equipment: ABS, = Additional options and accessories = - Spare wheel - Twin wheels = More information = Weights Empty weight: 8.900 kg Carrying capacity: 26.100 kg GVW: 35.000 kg Financial information Selling price: € 18.000, US$ 20.770 Other information Brake type on axle 1: drum Make of axle 1: BPW Suspension on axle 1: air Brake type on axle 2: drum Make of axle 2: BPW Suspension on axle 2: air Brake type on axle rear: drum Make of axle rear: BPW Suspension on axle rear: air Chassis: steel Rbodpoxw T Uaefx Ahusw Purchase on credit is possible: Yes Purchase by installments is possible: Yes Leasing is possible: Yes

Condition: used, axle configuration: 1 axle, first registration: 08/1993, Year of construction: 1993, Equipment: ABS, = Additional options and accessories = Rbsdjxt Sl Nspfx Ahusw - EBS = More information = Empty weight: 3.700 kg Carrying capacity: 9.300 kg GVW: 13.000 kg Purchase on credit is possible: Yes

Condition: used, axle configuration: 2 axles, first registration: 03/2004, Year of construction: 2004, Equipment: ABS, = Additional options and accessories = - EBS = More information = Empty weight: 4.850 kg Carrying capacity: 13.150 kg GVW: 18.000 kg Tyre tread remainder on axle rear: 60% Suspension on axle rear: air Rodjxyx Hajpfx Ahuobw Purchase on credit is possible: Yes

Condition: used, axle configuration: 2 axles, first registration: 04/2005, Year of construction: 2005, Equipment: ABS, = Additional options and accessories = - EBS = More information = Empty weight: 4.080 kg Carrying capacity: 13.920 kg Rbodpfx Aext Tf Rehujw GVW: 18.000 kg Purchase on credit is possible: Yes

Condition: used, axle configuration: 2 axles, first registration: 08/1996, Year of construction: 1996, Equipment: ABS, = Additional options and accessories = Rsdpfx Ajxt Sd Eohuebw - EBS = More information = Empty weight: 2.360 kg Carrying capacity: 10.640 kg GVW: 13.000 kg Purchase on credit is possible: Yes

Condition: used, empty load weight: 8,800 kg, maximum load weight: 31,200 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 04/1996, loading space length: 10,000 mm, loading space width: 2,510 mm, loading space height: 1 mm, suspension: steel, tire size: 235/75R17.5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 4 axles, turntable, leaf suspension, extendable to 3m, lashing eyes, 2-piece loading ramps, hydraulic ramps, rear support, side aluminium underrun protection, twin tyres, storage box. Body: 4-axle low-loader trailer with hydraulic 2-piece loading ramps. Loading height approx. 900mm. 4x 10t SAF axles, drum brakes, 40mm and 50mm towing eye! Upper platform length approx. 2,900mm! Lower platform length approx. 7,100mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted! Rbsdpeywvhrofx Ahusw

Condition: new, maximum load weight: 11,050 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, Equipment: ABS, tail-lift, * Müller-Mitteltal KA-TA-R 14.4 Tandem Low-loader Three-way Tipping Trailer with Ramps * BRAND NEW VEHICLE * Available from mid-May 2026 in RAL 9016 traffic white * Leasing, financing, and trade-in of your old trailer possible ---- * Inquiry No. 30505 ---- * Remote diagnosis unit with display option in the truck via EBS signal * Side marker lights with indicator activation * Gross weight: 14,400 kg, Payload: 11,050 kg * EBS 2S/2M * Galvanized floor, 5m x 2.42m x 0.5m, side walls laser-welded, swinging, fold-down, and removable, pre-equipped for later installation of side wall extensions * Lockable compartment under the tipping body for access ramp * Includes 1 pair of aluminium drive-on ramps, 8t/pair, 3.57m * Chassis hot-dip galvanized, front wall hot-dip galvanized * 4 UVV lashing rings LC 5000daN at the front and rear + 8 recessed, foldable lashing points LC 3000daN in the tipper body (centered) * Excavator bucket rest made of hardwood * 2-step access in front of the front wall (hot-dip galvanized) * Drawbar stepless height-adjustable, hot-dip galvanized, towing eye 40mm * Wide tires 385/55R 19.5 (4x), parabolic springs * Net hooks, rear stakes bolted on, hot-dip galvanized * Guy wires for the rear side wall * Plastic toolbox on the right of the chassis frame * LED lighting system 12 + 24 Volt * 2 LED reversing lights at the rear of the trailer ---- * Lease purchase price: Rbodpfx Ajyvxg Iehujw * e.g. €549 over 60 months with no down payment, no residual value. An offer from our financing partner "FM LeasingPartner". Other terms with/without residual value or down payment possible. * Request an offer from us! * We are Müller-Mitteltal authorized dealer * Free delivery possible with timely orders! ----Our Opening Hours Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Appointments outside business hours on request We speak German, English, Polish, French Whatsapp

Condition: new, maximum load weight: 16,500 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, Year of construction: 2026, Equipment: ABS, tail-lift, Müller-Mitteltal ETÜ-TAR 21 Tandem - Low loader | Flatbed Overrun Trailer Reference number for inquiries: 11630 Vehicle available immediately ex-stock Alsdorf Rjdpfx Ahjyvxg Ueuobw NEW VEHICLE incl. COC * Gross weight: 21t, net payload: 16.50t, galvanized chassis * Flatbed version with 400mm high front wall, ramp safety system using ramp retaining rods and diagonal supports * Version with 21t gross weight: reinforced frame and axle, axle spacing 1,810 mm * Floor height approx. 910 mm loaded / approx. 940 mm unladen * 7m loading bed with 400 mm high front wall * Extended ramps: 3m hot-dip galvanized, one-piece ramps with galvanized grating * Ramp assist system with vertically mounted, adjustable springs for easy single-person operation * Load securing package: * 4 UVV-compliant folding lashing brackets (LC 8,000 daN) installed into existing 45° outer frame hole pattern, positioned approx. 1m in from front and rear crossmembers * 10 UVV-compliant retractable lashing brackets LC 3,000 daN in outer frame's existing hole grid * 2 UVV-compliant retractable lashing rings at front & rear in crossmembers (LC 10,000 daN) * Additional lashing points via drilled holes (Ø 50 mm, LC 1,200 daN) in front and rear end crossmembers * Prepared for retrofitting container locks (container locks available and optional at extra cost) * Softwood floor, 50mm thick * Gigant axles with air suspension including EBS 2S/2M, ride height control (raise/lower) * 235/75R 17.5 (8x) twin tyres with tire pressure monitoring sensors * Plastic toolbox mounted in front of front wall, right-hand side (in the direction of travel) * LED lighting system * 7-pin socket on rear, wired for marker/oversize lighting with taillight (58R) and ground * 2 LED reversing lights at the rear * Flashing side marker lights * Oversize warning board * 1 removable all-round amber LED beacon with holder and installation * Folding rear supports, front support leg with gear winch ---- Example lease offer from our partner MMV Leasing: €655/month net, 60-month term, zero down payment, zero final residual payment Other terms possible, with/without down payment and/or residual value! We are official Müller-Mitteltal representatives ---- Our opening hours: Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside these hours by appointment! Languages spoken: German, English, Russian, Polish, French WhatsApp available

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: * EBS brake system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle compensation * Lateral underrun protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign boards at front and rear * Closed plastic mudguards at the front axle and straight galvanized steel splash aprons at the rear axle, each with mud flaps * Side and rear reflective contour marking tape * Hinged cover (hot-dip galvanized) for toolbox in the turntable platform * Multi-voltage system * LED tail lights * Removable beacon at rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin power connector * 4 stake pockets on each side (stakes not included) with integrated lashing points * Load securing package consisting of: 2 lashing eyes (6.4 t) at front left & right on the main frame of the turntable platform, 5 pairs of UVV folding & lowering lashing rings, loadable in all directions and recessed into the outer frame – 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for a total width of 3 m (not at the rear taper) * Widening boards stored in the center of the loading area * Excavator arm rest over rear axle up to end cross member approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the side of the excavator arm rest) * Mechanical one-piece loading ramps with spring mechanism (approx. 3,000 x 720 mm) * Mechanically controlled lateral ramp adjustment * Loading area above turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm approach angle) * Chassis, turntable, drawbar, and loading ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Technically possible gross weight of 30,000 kg-- Rbsdpfx Asx Ipa Nehusw * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release mechanism for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic leaf springs * Mechanical axle equalizer at rear * Side underrun protection * Swivel support legs at the rear on the chassis frame * Mechanically adjustable warning sign packages front and rear * Front axle with closed plastic mudguards, rear axle with straight galvanized steel fender skirts, each with splash guards * Reflective contour tape on the sides and rear * Hinged cover (hot-dip galvanized) for the toolbox in the turntable platform * Multi-voltage system * LED tail lights * Removable rotating beacon at the rear * Towing bar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * 4 stake pockets per side (stakes not included), can be used for load securing * Load-securing package consists of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform, 5 pairs of UVV swivel and retractable lashing rings, loadable in all directions, recessed into the outer frame – 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding extensions for a total width of 3 meters (not in the rear taper) * Widening boards stored in the center of the loading area * Excavator arm rest over rear axle up to end member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings to the side in the excavator arm rest) * Mechanical one-piece loading ramps with spring mechanism (approx. 3,000 x 720 mm) * Mechanical lateral ramp adjustment * Loading area above turntable: approx. 1,960 x 2,520 mm Rodpfxsx Ipavs Ahuebw * Load height unladen approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Load height unladen approx. 910 mm (incl. 860 mm approach angle) * Chassis, turntable, towing bar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in a shade of black * 235/75 R 17.5 twin tires * Unladen weight: 5,900 kg * --Technical gross weight up to 30,000 kg possible-- * Vehicle is hot-dip galvanized * Brand new vehicle with manufacturer warranty * Errors and prior sale excepted * Immediately available from Egestorf

Condition: used, maximum load weight: 16,950 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 06/2006, next inspection (TÜV): 04/2026, Year of construction: 2006, * Müller Mitteltal T3 NG * Low-bed trailer * Ramps * Twin tires * Permissible total weight: 24,000 kg * Unladen weight: 7,050 kg * Payload: 16,950 kg * Tires: see pictures * BPW axles * Immediately available * Errors excepted We offer: Rbedpfx Asyv Ug Dohuew Net purchase for EU businesses with VAT ID as well as clients from non-EU countries. Leasing and financing available. Handling of all customs formalities. Issuance of short-term and export license plates. Transport to port. All prices listed on classifieds are gross prices and already include 19% VAT.

Condition: used, axle configuration: 2 axles, first registration: 11/2006, total length: 7,900 mm, total width: 2,550 mm, suspension: air, tire size: 385/65R22.5, color: other, Year of construction: 2006, = Additional options and accessories = Rbsdpfx Asycfukohuew Engine - Number of fuel tanks: 1 Superstructure - Capacity of the superstructure: 9 m3 (The total capacity of the superstructure.) - Material: steel - Superstructure construction year: 2006 = More information = General information Colour: Purple Applicable material: Concrete Axle configuration Tyre size: 385/65R22.5 Make axles: BPW Eco plus Brakes: drum brakes Suspension: air suspension Axle 1: Tyre profile left: 30%; Tyre profile right: 30% Axle 2: Tyre profile left: 10%; Tyre profile right: 20% Weights Empty weight: 7.920 kg Carrying capacity: 21.080 kg GVW: 29.000 kg = Dealer information = Would you like more information about this vehicle? We recommend that you take a look on BAS World. • 3500+ Brand new and used vehicles and machines in stock • Trade-in your current vehicle • Full in-house workshop for inspection, repairs and customisation • Personal advice in your own language • Worldwide delivery and documentation support Want to know more? Visit BAS World online! España (ES) Hablamos 17 idiomas, para que siempre podamos ayudarte en tu propio idioma. No dudes en ponerte en contacto con nosotros directamente. ¡Nuestro empleado español estará encantado de ayudarte! Deutschland (DE) Wir sprechen 17 Sprachen, damit wir dir immer in deiner eigenen Sprache helfen können. Kontaktiere uns gerne direkt. Unser deutscher Mitarbeiter hilft dir gerne! France (FR) Nous parlons 17 langues, afin de pouvoir toujours vous aider dans votre propre langue. N'hésitez pas à nous contacter directement. Notre collaborateur français se fera un plaisir de vous aider ! Portugal (PT) Falamos 17 idiomas, para que possamos sempre ajudá-lo no seu próprio idioma. Não hesite em nos contactar diretamente. O nosso colaborador português terá todo o prazer em ajudá-lo! Italia (IT) Parliamo 17 lingue, per poterti sempre aiutare nella tua lingua. Non esitare a contattarci direttamente. Il nostro collaboratore italiano sarà felice di aiutarti!

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at rear ----Axles: * 3 x 11 t Gigant axles * Center axle can be lifted ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye & adjustable height mechanism Rbjdpfotplv Tex Ahuow ----Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System) ----General Accessories: * Tool box made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side impact protection * Plastic quarter mudguards with splash protection * Plastic rear underrun protection bumper * Mechanical drop-down supports at rear ----Container / Low-bed Platform: * Hot-dip galvanized main frame with raised side rails (approx. 25 mm higher) for guiding roll-off containers * Steel floor with roller recesses in turntable area * For roll-off container transport, container length 5,500–7,000 mm possible * Pneumatic 4-point clamp locking as well as mechanical plug-in stop angles at the front in the running rails * Load certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ capacity possible * 8 repositionable skip stops for lateral centering, front 4 skip stops in place with oscillating stop ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the side for attaching tie-down aids to secure the skips positively and non-positively * Four cloverleaf lashing lugs on each side and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld bead as anti-slip surface in the running path area of the ramp * 1 pair of aluminum approach ramps (16 t/pair) 2,800 x 400 mm, suitable for rubber-tyred and tracked vehicles (lockable stowage compartment accessible from the rear) ----Tyres: * Tyre size: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Side and rear reflective contour tape * Axles, turntable, drawbar, and air tank painted in black * Hot-dip galvanized main frame ----Info: * Technically permissible gross weight: 27,000 kg * New vehicle without initial registration with manufacturer’s warranty * Subject to error and prior sale ----Delivery time: * Available from calendar week 20/2026

Condition: new, maximum load weight: 16,500 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, Year of construction: 2026, Equipment: ABS, tail-lift, Müller-Mitteltal ETÜ-TAR 21 Tandem - Low-bed Trailer / Drive-over Flatbed Trailer Enquiry No.: 27963, available end of March 2026 NEW VEHICLE incl. COC (Certificate of Conformity) * Gross weight: 21t, Payload: 16.50t, galvanized chassis * Available end of March 2026 * Flatbed design with 400mm high front wall, ramp securing via ramp holding rods and diagonal supports * Version: 21t gross weight, reinforced frame and axle, axle spacing 1,810 mm * Bed height approx. 910 mm (loaded) / approx. 940 mm (unloaded) * 7,000 mm loading area with 400 mm high front wall * Extended ramps: 3,000 mm, hot-dip galvanized one-piece ramps with galvanized grating * Ramp lifters with vertically positioned, adjustable springs for easy single-person operation * Load securing package: * 4 UVV drop lashing rings (LC 8,000 daN) mounted to the existing hole pattern in the 45° outer frame, positioned approx. 1m from the front and rear end beams * 10 UVV retractable lashing rings (LC 3,000 daN) recessed in the existing hole grid in the outer frame * 2 UVV lashing rings each front and rear, recessed in the end crossmember (LC 10,000 daN) * Additional lashing points via drill holes (Ø 50 mm, LC 1,200 daN) in the front and rear end crossmembers * Prepared for retrofitting container locks * 50mm thick softwood floor * Air suspension, Gigant axles incl. EBS 2S/2M, raise and lower function * 235/75R 17.5 (8x) dual tires with tire pressure monitoring sensor * 1 plastic toolbox in front of the bulkhead, right-hand side (in direction of travel) * LED lighting system * 7-pin socket at rear, wired for over-length lighting with rear light (58 R) and ground * 2 LED reversing lights at rear Rodpfx Ajyuq R Uehuebw * Flashing side marker lights * Oversize warning sign * 1 removable round LED beacon incl. holder and installation * Folding supports at rear, jockey wheel at front with gear winch ---- Lease purchase example from our partner MMV Leasing: €655/month net at 60 months without down payment and "0" euro final payment Other terms with/without down payment/final value possible! We are an official Müller Mitteltal dealer ----* Our opening hours: * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 * Outside opening hours by appointment * We speak German, English, Russian, Polish, and French * Leasing, financing, trade-in possible

Condition: used, maximum load weight: 30,700 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 11/2002, Equipment: ABS, * MüllerMitteltal low-loader 4-axle T40 * 2x steered turntable axles * German trailer * Pen * Hydraulically adjustable ramps / left-right Rodpoyuri Ejfx Ahuebw * Split foldable ramps * Extendable * ABS * BPW axles * 40 t * Unladen weight: 9,300 kg * Axle load: 10 t per axle * Fully functional * Tyres in good condition