Used Müller-Mitteltal Silo Semitrailers for sale (260)

Condition: new, suspension: other, color: other, gearing type: other, driver cabin: other, emission class: none, fuel: biodiesel, Storage compartment for aluminum ramps, price per storage compartment, length approx. 2.48 m, width approx. 1 m, height approx. 27 cm, , --  Misprints, errors and changes reserved, sample images --, More information at: !, More details: ! Gsdpfx Aex Tv Ahshvsil

Condition: new, maximum load weight: 8,620 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2024, * KA-TA-R 11.9: ----Brakes: * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable (up to 300 mm) hot-dip galvanized drawbar with 40 mm flanged towing eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * LED rear lights ----General Attachments: * Jost mechanical landing gear at the front * Two mechanical hot-dip galvanized folding supports at the rear * Galvanized steel toolbox, right-hand side Godpfxem Angve Ahvsil * Hot-dip galvanized bolted underrun protection * Galvanized steel toolbox, right-hand side * Plastic quarter mudguards ----Tipper Body: * Mesh hooks on the sides and rear at the central locking mounts plus 3 at the front wall * Hot-dip galvanized chassis * Steel pallet 3-way tipper body * Continuous drop sides, foldable without centre stanchions, with drop side spring assist * Foldable and swinging tailgate via manual central locking * Hot-dip galvanized, bolted rear stanchions * 4 mm steel floor plate * Preparation for subsequent fitting of side extensions * 5.5 meter long body ----Load Securing: * One 5 t lashing ring at each corner * Plus four 3 t recessed lashing rings per side in the outer frame ----Ramps: * Rear mounting rail for approach ramps * One pair of aluminum approach ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Rear lockable storage compartment recessed under body in chassis ----Wheelbase: * Wheelbase: 990 mm ----Tyres: * Tyres: 235/75R17.5 ----Paintwork: * Axles, springs, air tanks, drawbar and landing gear painted in black * Tipper body painted in RAL 9010 pure white * Painting of side walls and tipper body in any RAL color available for additional cost ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without initial registration, with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf on the A7

Condition: used, functionality: fully functional, empty load weight: 11,070 kg, maximum load weight: 28,930 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 04/2023, next inspection (TÜV): 06/2026, loading space length: 9,800 mm, loading space width: 2,540 mm, suspension: air, tire size: 235/75 R 17,5, color: black, Year of construction: 2023, Equipment: ABS, center pivot plate, Object number #30732 Hydraulic loading ramps Trailing steering axle A4 2 pairs of wheel recesses BPW axles Drum brakes Tyres: 235/75 R 17.5 Superstructure: 9,800 x 2,540 mm Width extendable by 3,000 mm Excavator arm rest 4 pairs of UVV lashing rings 16,500 daN 8 pairs of UVV lashing eyes 13,500 daN 3 pairs of lashing rings 6,400 daN 3 pairs of lashing rings 5,000 daN Chassis and turntable galvanized Twin tyres Lifting/lowering function Hydraulic rear support 2 pairs of warning boards ABS/EBS Rotating beacon 50 mm towing eye Duomatic coupling LED work lights Extendable tow bar 3x front toolboxes Wabco Smart Board (57,250 km) Godpfx Ahjx Ttgqsvoil Axle load indicator Leasing or financing available on request!!

Condition: excellent (used), axle configuration: 2 axles, first registration: 06/2019, total length: 10,800 mm, total width: 2,550 mm, total height: 3,700 mm, tire size: 235/75R17.5, wheelbase: 6,460 mm, Year of construction: 2019, Low-loader semi-trailer for sale. Brand: Müller Mitteltal. Model: T 2 Profi 20.0. Year of manufacture: 2019. 2 axles. Gross vehicle weight: 20,000 kg. Unladen weight approx. 5,140 kg. Wooden loading platform. Rear access ramps. Extendable width boards. Fully galvanized chassis. Tyre size: 235/75 R17.5. Colour: orange. German vehicle documents. TÜV valid until 02-2026. Last inspection: no defects. Neat and complete semi-trailer. Good condition. Ready for immediate use for machinery and equipment transport. = Further information = Axle configuration Tyre size: 235/75R17.5 Axle make: BPW Front axle: twin wheels; max. axle load: 10,000 kg; tyre tread left inner: 80%; tyre tread left outer: 80%; tyre tread right inner: 80%; tyre tread right outer: 80% Rear axle: twin wheels; max. axle load: 10,000 kg; tyre tread left inner: 80%; tyre tread left outer: 80%; tyre tread right inner: 80%; tyre tread right outer: 80% Weights gross permissible weight: 20,000 kg Functional Gijdpex Swl Usfx Ahvel Platform height: 92 cm Condition Technical condition: very good Optical condition: very good Damages: none Further information Please contact Gerrit Haverhoek for further details.

Condition: used, overall weight: 4,400 kg, axle configuration: 2 axles, first registration: 04/2019, loading space length: 5,400 mm, loading space width: 2,470 mm, loading space height: 400 mm, Equipment: ABS, Müller Mitteltal ETÜ TA R 14.4 Tree Machinery Transport Through-Loading System Internal Ref. No. for inquiries: 0126006 * Condition: very good * First registration: 26.04.2019 * Own weight: 4,600 kg * Through-loading system * ABS * EBS * 2 axles, air-suspended * Two robust access ramps / electric * Wear-resistant wooden floor * Lashing rings Gedpfox Tbwdjx Ahvjil * Drop sides Dimensions (cargo area/bed) Cargo length: 5,400 mm Cargo width: 2,470 mm Cargo height: 400 mm ---- Price: €24,900 + 19% VAT. For further questions, you can reach us at the following phone numbers: We speak: German, English, French and ????? Errors, mistakes, and prior sale excepted.

Condition: new, Year of construction: 2025, Cable drum transport trailer. Gross vehicle weight 8,800 kg, payload 5,820 kg. Hydraulic cable drum lifting and lowering from the towing vehicle or via a separate Hatz diesel engine (6.5 HP). Hydraulic drum drive with rubber-covered drive rollers. Drum diameter 800-3,000 mm, drum width up to 1,700 mm, centering cones for cable drums. Two-speed front landing gear, extendable rear support. BPW axle, EBS, parabolic suspension, Continental 315-80R22.5 tires, tire pressure monitoring. Towing eye 40 mm height adjustable, 2-wire pneumatic system, 24 V LED lighting. Toolbox. Vehicle completely hot-dip galvanized. New vehicle including factory warranty. = Further information = Curb weight: 2,980 kg Payload: 5,820 kg GVW: 8,800 kg Rear tires: 315-80R22.5 Country of production: Germany Contact Jan-Marc Schwickert for further information. Gjdpfx Aewdd Aqohvsil

Condition: new, suspension: other, color: other, gearing type: other, driver cabin: other, emission class: none, Leveling bracket for low-loader semi-trailer including container closures, price per leveling bracket, , --  Subject to printing errors, mistakes and changes, sample images --, More information at: !, More details: ! Godpfox Tvx Nex Ahvsil

Condition: new, maximum load weight: 8,620 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2024, * KA-TA-R 11.9: ----Brakes: * Electronic Braking System (EBS) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axles ----Suspension: * Parabolic springs with tandem equaliser unit ----Drawbar / Flange Eye: * Height-adjustable, hot-dip galvanised drawbar, adjustable by 300 mm, with 40 mm flange eye ----Electrics / Lighting: Gijdsl Thx Ejpfx Ahvel * Tire Pressure Monitoring System (TPMS) * 15-pin power connector * LED tail lights ----General Attachments: * Jost mechanical landing gear at the front * Rear: 2 mechanical, hot-dip galvanised folding support legs * Tool box made of galvanised sheet steel, mounted on the right side * Hot-dip galvanised, bolted underrun protection * Plastic quarter mudguards ----Tipper Platform: * Net hooks on the sides and rear integrated into the central locking brackets, plus 3 hooks on the front wall * Hot-dip galvanised chassis * 3-way tipping steel platform for pallets * Continuous drop sides without intermediate stanchions, foldable with drop side spring loaders * Rear drop gate can be folded down or operated in pendulum mode via manual central locking * Bolted, hot-dip galvanised rear stanchions * 4 mm steel floor plate * Prepared for retrofitting of drop side extensions * 5.5 metre-long platform ----Load Securing: * Each corner fitted with 1 x 5 t lashing ring * 4 x 3 t lashing rings integrated into the outer frame on each side ----Ramps: * Rear guide rails for loading ramps * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment under the loading area at the rear, integrated into the chassis ----Wheelbase: * Wheelbase: 990 mm ----Tyres: * Tyres: 235/75R17.5 ----Paintwork: * Axles, springs, air tanks, drawbar and landing gear painted in a shade of black * Platform superstructure colour: RAL 9010 pure white * Painting of the side walls and tipping platform in an RAL colour tone available at extra cost ----Information: * Reinforced superstructure with load securing certificate according to EN 12642 XL * New vehicle without initial registration, with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately ex works Egestorf (A7 motorway)

Condition: used, axle configuration: 2 axles, first registration: 04/2005, color: black, Year of construction: 2005, Equipment: ABS, Empty weight: 8.900 kg Gsdpfx Ahexw T Uasvoil Carrying capacity: 26.100 kg GVW: 35.000 kg Selling price: € 19.000, US$ 22.200

Condition: used, axle configuration: > 3 axles, first registration: 04/2000, loading space length: 10,790 mm, loading space width: 2,500 mm, loading space height: 950 mm, total length: 14,790 mm, total width: 2,500 mm, suspension: steel, Year of construction: 2000, Additional information : Brand: MÜLLER MITTELTAL Model: TS4 Structure: low loader ( platform L=10790 mm / W=2500 mm / H=950 mm ) Year: 2000 Suspension: steel Brakes: drum Dimensions: L/W: 14790 mm / 2500 mm Godpfx Ahjuwu Ezovoil Masses: full/empty: 57000 kg / 11800 kg HYDRAULIC RAMPS / STEEL SUSPENSION / DRUM BRAKES = More information = Suspension: leaf suspension Empty weight: 11.800 kg Carrying capacity: 45.200 kg GVW: 57.000 kg Please contact Andrei Somov, Mark Ševtšenko or Deniss Urmaker for more information

Condition: used, maximum load weight: 29,850 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 07/2012, next inspection (TÜV): 01/2028, Year of construction: 2012, Internal vehicle number: G300402 German vehicle Immediately available at our premises in Kaufungen – Kassel, Germany For more INFO, contact Luis Lucena Year of manufacture: 2012 Empty trailer weight: 6,530 kg LIEBHERR concrete mixer semi-trailer 10 m³ Gedoxy Ul Sepfx Ahveil Errors and omissions excepted We are happy to take your used vehicle in part exchange. Financing available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, empty load weight: 4,550 kg, maximum load weight: 13,450 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2016, loading space length: 6,540 mm, loading space width: 2,480 mm, suspension: air, tire size: 235 / 75 R 17,5, color: beige, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, 10 pairs of lashing eyes, loading height approx. 900 mm, , customer vehicle, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Godpsx S Nzusfx Ahvsil

Condition: new, maximum load weight: 14,400 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-ER 19.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 ton Gigant axles * Air suspension with lifting and lowering system * Drawbar with 50 mm flange eye and height adjustment of 110 mm via offset plate * Jost landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * Multi-chamber tail lights * Reinforcement package on the chassis for drill rig transport * 50 mm softwood floor, clamped design * Fixture for retrofitting container locks in front of the bulkhead * Bolted bulkhead made of smooth sheet metal * Split side walls made of trapezoidal-profiled steel sheet, foldable with a central folding stanchion * Steel rear wall, retractable between the ramps – storage holder inside in front of the bulkhead when not in use * Rear stanchions bolted * Perforated outer frame, angled approx. 45 degrees, with 2 ton lashing capacity every 480 mm * Option to install 3 ton drop lashing rings every 600 mm * Load securing package: in each corner at the front and rear, 1 x 10 ton UVV lashing ring; on each side, 2 x 8 ton UVV recessed lashing rings in the outer frame; various holes in the bulkhead and end crossmember for 1.2 ton lashing options * One-piece slide-in ramps, 12 t/pair of ramps, approx. 2,750 x 620 mm * Rear approach angle approx. 860 mm * Chassis, drawbar, bulkhead, tailgate, folding supports, and ramps hot-dip galvanized * ---Axles, air reservoir, flange towing eye, and landing gear painted in black--- * Unloaded loading height approx. 940 mm * Loaded loading height approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty Gjdsmi Tcqjpfx Ahvjil * Errors and prior sale excepted * Available immediately from Egestorf

Condition: used, axle configuration: 3 axles, first registration: 09/2001, total length: 10,000 mm, total width: 2,510 mm, suspension: steel, Year of construction: 2001, Additional information : Brand: MÜLLER MITTELTAL Model: T 3 Structure: platform ( platform L=8400 / W=2510 / H=940 mm ) Year: 09.2001 Suspension: steel Brakes: drum Dimensions: L/W: 10000 mm / 2510mm Masses: full/empty: 24000 kg / 6100 kg = More information = Gijdpouwvbqefx Ahvjl Suspension: leaf suspension Empty weight: 6.100 kg Carrying capacity: 17.900 kg GVW: 24.000 kg Please contact Andrei Somov, Mark Ševtšenko, Alejandro Goyeneche or Deniss Urmaker for more information

Condition: used, empty load weight: 7,340 kg, maximum load weight: 22,660 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 05/2012, loading space length: 9,200 mm, suspension: steel, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length approx. 9,200 mm, loading height approx. 900 mm, 16 x lashing eyes, , Vehicle is sold on order , , , -- Subject to misprints, errors and alterations, sample pictures --, More data under: !, More Details: ! Gisdpfx Asx S Nzbjhvol

Condition: new, maximum load weight: 14,400 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-ER 19.0: * Wabco EBS-E (electronic braking system) * RDÜ tire monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lifting and lowering device * Drawbar with 50 mm flanged towing eye and height adjustment of 110 mm using offset plate * Jost front landing gear * Outward folding rear supports * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards * 15-pin electric connector * Multi-chamber tail lights * Reinforcement package for drill rig transport on the chassis * 50 mm softwood floor, clamped design * Fixture in front of the bulkhead for subsequent installation of container locks * Bolted bulkhead made of smooth sheet metal * Split side walls made of trapezoidal-profiled steel sheet, fold-down with fold-down stanchion in the center * Steel rear wall, slidable between ramps – storage bracket inside in front of bulkhead when not in use * Rear posts bolted * Perforated outer frame bent at approximately 45 degrees with 2 t lashing capacity every 480 mm * Installation of 3 t drop-forged lashing brackets every 600 mm possible * Lashing package: In each front and rear corner 1 x 10 t UVV lashing ring, on each side 2 x 8 t UVV retractable lashing rings in the outer frame, various holes in the bulkhead and rear cross-member for 1.2 t lashing options * One-piece sliding ramps, 12 t/pair, approx. 2,750 x 620 mm * Rear loading slope approx. 860 mm * Chassis, drawbar, bulkhead, rear flap, folding supports, and drive-on ramps hot-dip galvanized * --- Axles, air tank, flanged towing eye, and landing gear painted in black tone --- Gisdomi Tmaepfx Ahvol * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Condition: used, empty load weight: 6,500 kg, maximum load weight: 23,500 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 06/2010, suspension: steel, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Vehicle is sold on behalf of a customer, partly wooden boards def., 17 pairs of lashing eyes, , loading height approx. 900 mm, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Gedex S Nzhjpfx Ahveil

Condition: new, maximum load weight: 8,800 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,370 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 11.9: ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes, 2 x 5.5 t ----Axles: * Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange towing eye ----General Attachments: * Jost landing gear at front * External foldable support legs at rear * Plastic toolbox on the front right outside, mounted on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * TPMS (tire pressure monitoring system) * LED lighting ----Loading Platform: * Loading area 5.37 m * 50 mm softwood floor * Bolt-on bulkhead made of flat sheet metal * Side walls made of trapetzoidal-profiled steel, foldable with drop-side spring assist * Rear wall made of steel, can be slid between the ramp holders for storage in front of the bulkhead when not in use * Rear stakes bolted ----Load Securing: * Outer frame with perforations, bent approx. 45 degrees, lashing capacity 2 t every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible * In each front and rear corner, one lashing ring, 6.3 t each * Various holes in the bulkhead and rear crossmember for 1.2 t lashing options ----Ramps: * One-piece mechanical grid ramps with spring system for single-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Rear approach angle approx. 860 mm from chassis Gsdel Th Ncopfx Ahvoil ----Tyres: * Tyres 235/75 R 17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Drawbar, bulkhead, tailgate, foldable supports, and drive-on ramps hot-dip galvanized * Axles, springs, air tanks, and 40 mm flange towing eye painted in black shade * Side wall paintwork in RAL2011 deep orange * Custom color paintwork for side panels available for an additional charge ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately from Egestorf

Condition: used, empty load weight: 7,180 kg, maximum load weight: 22,820 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 02/2018, next inspection (TÜV): 07/2026, loading space length: 9,000 mm, suspension: air, tire size: 235/75R17,5 ---/140J, color: other, gearing type: other, front tire size: 235/75R17,5 ---/140J, rear tire size: 235/75R17,5 ---/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length approx. 9,000 mm, loading height approx. 900 mm, insertable stakes, -- printing errors, mistakes and changes reserved, sample images --, More data at: !, More details: ! Gisdpfex S Nznex Ahvel

Condition: new, maximum load weight: 8,870 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-ER 11.9: ----Brakes: * Electronic braking system (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle system ----Suspension: * Parabolic springs with equalizer unit Godpfxjl Tilxj Ahvoil ----Drawbar / Flange Eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange eye ----General Attachments: * Jost mechanical landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Side underrun protection * Quarter fenders made of plastic * Plastic toolbox mounted front right on the bulkhead ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * 15-pin power connector * LED tail lights ----Loading Area: * 50 mm softwood floor * 20" container locks mounted at front and rear * Bolted smooth sheet bulkhead * Drop side walls made of profiled steel plate, trapezoidal, foldable with board wall spring assist * Bolted, hot-dip galvanized rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing shackles every 600 mm (5 lashing rings each side installed) * In each of the front and rear corners, 1 x 6.3 t lashing ring * Various holes in the front bulkhead and end beam for 1.2 t lashing points ----Ramps: * 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Rear storage compartment below the loading surface, integrated into the chassis ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, and rear wall * Side wall color RAL 9010 pure white * Painting of the side walls in any RAL color available at additional cost ----Information: * New vehicle, unregistered * Errors and prior sale excepted ----Delivery Time: * Immediately available ex Egestorf

Condition: used, empty load weight: 2,500 kg, maximum load weight: 7,500 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 09/2003, loading space length: 5,200 mm, suspension: steel, tire size: 245/70R19,5 140/138J, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245/70R19,5 140/138J, rear tire size: 245/70R19,5 140/138J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, 10 x lashing eyes, 600 mm drop sides, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Gisdpfx Aex N Rtgohvol

Condition: new, maximum load weight: 8,800 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,370 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 11.9: ----Brake System: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes, 2 x 5.5 t ----Axles: * Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Drawbar / Flange Eye: * 300 mm height-adjustable drawbar * 40 mm flange towing eye ----General Attachments: * Jost support winch at the front * External folding support legs at rear * Plastic toolbox on the right front exterior of the front wall * Side underride protection * Plastic quarter mudguards Godpfx Ael Th Nrjhvjil ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting ----Loading Platform: * Load area 5.37 m * 50 mm softwood floor * Bolted bulkhead made from smooth sheet metal * Drop sides made of trapezoidal-profiled steel sheet, foldable, with drop-side spring assist * Steel tailgate, slidable between ramp supports when not in use, stowed inside in front of the bulkhead * Screw-mounted rear stanchions ----Load Securing: * Perforated external frame, bent at approx. 45 degrees with 2 t lashing capacity every 480 mm * Option to fit 3 t recessed lashing rings every 600 mm * One 6.3 t lashing ring in each front and rear corner * Various bores in the bulkhead and rear crossmember for 1.2 t lashing points ----Ramps: * One-piece mechanical grid ramps with spring system for single-person operation, approx. 2,750 x 600 mm (can be retracted to 20 mm) * Rear approach angle approx. 860 mm chassis ----Tyres: * Tyres 235/75 R 17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Drawbar, bulkhead, tailgate, folding supports, and access ramps hot-dip galvanized * Axles, springs, air tank, 40 mm flange towing eye coated in black * Drop-side panels painted in RAL2011 deep orange * Side walls can be painted in any RAL color for an additional charge ----Information: * New vehicle with manufacturer's warranty * Subject to prior sale and errors ----Delivery Time: * Immediately available ex Egestorf

Condition: new, maximum load weight: 8,870 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-ER 11.9: ----Brake system: * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle system ----Suspension: * Parabolic leaf springs with equalizing aggregate ----Drawbar / Flange towing eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange towing eye ----General attachments: * Jost mechanical support landing gear at the front * Rear external foldable support legs, hot-dip galvanized * Side underrun protection * Plastic quarter mudguards * Plastic toolbox mounted front-right on the bulkhead ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) Gedpfxol Thy Ro Ahvjil * 15-pin power connector * LED tail lights ----Loading area: * 50 mm softwood floor * 20" container locks fitted at front and rear * Front bulkhead bolted, made from smooth sheet metal * Drop sides made from trapezoidal-profiled steel, foldable with tailgate spring assist * Rear stanchions, hot-dip galvanized and bolted ----Load securing: * Perforated outer frame, approx. 45° edged, with 2 t lashing capacity every 480 mm * Optional installation of 3 t folding lashing brackets every 600 mm (each side fitted with 5 lashing rings) * One 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross beams for 1.2 t lashing options ----Ramps: * 1 pair of aluminum approach ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for pneumatic-tyred and tracked vehicles * Rear stowage compartment beneath the loading platform, integrated in the chassis ----Paint/Coating: * Chassis, drawbar, front and rear bulkheads hot-dip galvanized * Side board color RAL 9010 pure white * Sides can be painted in any RAL color at extra cost ----Additional information: * New vehicle without registration * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Condition: new, maximum load weight: 8,780 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2024, * KA-TA-R 11.9 Masterline: ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem compensating unit ----Drawbar / Flange Eye: * Height-adjustable (up to 300 mm), hot-dip galvanized drawbar with 40 mm flange eye ----General Attachments: * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanized folding support legs at the rear * Side-mounted toolbox made of galvanized sheet steel, on the right * Plastic quarter mudguards ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * Bolted underrun protection with LED tail lights ----Tipper Body: * Mesh hooks on the sides and rear, integrated into the central locking mounts plus 3 external hooks on the front wall * Hot-dip galvanized chassis * Steel pal. three-way tipper body, fully galvanized * Continuous side walls, without central stanchion, foldable, with drop side spring supports * Tailboard can be folded down and used as a swinging gate, with manual central locking * Hot-dip galvanized, bolted rear stanchion ----Load Securing: * 1 x 5 t recessed, foldable lashing ring in each corner, plus 4 x 3 t recessed and foldable lashing rings integrated in the outer frame on each side * 4 mm steel floor, with slot rail at the rear for loading ramps ----Ramps: * 1 pair of aluminum loading ramps, approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the bed, integrated into the chassis, accessible from the rear ----Tyres: * Tyres 235/75 R 17.5 ----Paintwork: * Axles, springs, air tanks, drawbar and landing gear painted in black * Vehicle is hot-dip galvanized ----Information: * Body reinforced, load securing certificate according to EN 12642 XL * New vehicle with manufacturer warranty Gsdpfx Ahepk D D Ujvoil * Subject to prior sale and errors ----Delivery time: * Immediately available ex Egestorf on the A7

Condition: new, maximum load weight: 8,780 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2024, * KA-TA-R 11.9 Masterline: ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem compensating unit ----Drawbar / Flange Eye: * Height-adjustable (up to 300 mm), hot-dip galvanized drawbar with 40 mm flange eye ----General Attachments: * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanized folding support legs at the rear * Side-mounted toolbox made of galvanized sheet steel, on the right * Plastic quarter mudguards ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * Bolted underrun protection with LED tail lights ----Tipper Body: * Mesh hooks on the sides and rear, integrated into the central locking mounts plus 3 external hooks on the front wall * Hot-dip galvanized chassis * Steel pal. three-way tipper body, fully galvanized * Continuous side walls, without central stanchion, foldable, with drop side spring supports * Tailboard can be folded down and used as a swinging gate, with manual central locking * Hot-dip galvanized, bolted rear stanchion ----Load Securing: * 1 x 5 t recessed, foldable lashing ring in each corner, plus 4 x 3 t recessed and foldable lashing rings integrated in the outer frame on each side * 4 mm steel floor, with slot rail at the rear for loading ramps ----Ramps: * 1 pair of aluminum loading ramps, approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the bed, integrated into the chassis, accessible from the rear ----Tyres: * Tyres 235/75 R 17.5 ----Paintwork: * Axles, springs, air tanks, drawbar and landing gear painted in black * Vehicle is hot-dip galvanized ----Information: * Body reinforced, load securing certificate according to EN 12642 XL * New vehicle with manufacturer warranty Gsdopk D Dmspfx Ahvoil * Subject to prior sale and errors ----Delivery time: * Immediately available ex Egestorf on the A7