Trailer

MÜLLER-MITTELTAL 3-achs Plateu Anhänger, mit 3 Kabelböcken

Condition: new, maximum load weight: 18,000 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 9,230 mm, loading space width: 2,480 mm, Year of construction: 2026, * TP 30.0 with 3 cable drum supports ----Braking System: * Wabco TEBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lift and lower system ----Drawbar: * Drawbar, 1,800 mm long with 40 mm towing eye ----Electrical / Lighting: * Tire pressure monitoring with display option in the truck dashboard via EBS signal – no installation required on the truck side * 15-pin power connector * 2 additional LED reversing lights (activated when reverse gear is engaged) * LED lighting ----General Attachments: * Aluminum air tank * Stainless steel toolbox mounted on the side, approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Rear underrun protection ----Platform: * Zurr-fix outer frame, 45° angled with perforation for lashing equipment; lashing capacity per lashing point: 2,000 kg at 480 mm spacing * Option to install 3,000 kg fold-down lashing brackets at approx. 600 mm intervals – delivery includes 12 pcs. 3,000 kg lashing brackets per side * 5 sockets per side in the outer frame for stakes 100 x 50 mm – stakes not included in the delivery * 30 mm anti-slip phenolic plywood floor ----Drum Supports: * 3 galvanized drum supports, secured with container locks, with lateral forklift pockets, center/center 800 mm (pocket width: 185 mm) * Max. drum diameter: 2,600 mm; max. drum width: 1,650 mm * Clear width between support arms: approx. 1,775 mm, with cross member * Max. drum weight per support: 6,000 kg * Without drive and drum brake * Support arm with clamping closure for securing drum shaft * Steel drum shaft, 76 mm diameter, centered and with rotating ends * 2 set collars * 2 centering cones made of polyamide * 4 pcs. 3.2 t lashing eyes on support arms for customer-provided securing of the drum against rotation and unwinding ----Loading Height: * Approx. 1,040 mm when loaded ----Paintwork: * Chassis, turntable, drawbar, outer frame, and underrun protection hot-dip galvanized * Axles painted in black ----Information: * Technical upgrade to 30 t GVWR possible Lasdpfx Aex Nli Nehzok * New vehicle with manufacturer's warranty * Subject to prior sale and errors * Immediately available ex works Egestorf

Condition: new, maximum load weight: 18,000 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 9,230 mm, loading space width: 2,480 mm, Year of construction: 2026, * TP 30.0 with 3 cable drum supports ----Brakes: * Wabco TEBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t Gigant axles ----Suspension: * 17.5" air suspension with lift and lowering system ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring, display possible on truck dashboard via EBS signal (no installation required on the truck side) * 15-pin power connector * 2 additional LED reversing spotlights (switched via reverse gear) * LED lighting ----General equipment: * Aluminum air tank * Stainless steel side toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection Lsdox Nlkaepfx Ahzoak * Plastic quarter mudguards * Rear underrun protection ----Platform: * Zurr-fix external frame, 45° angled, with perforations for lashing equipment, lashing capacity per point 2,000 kg at 480 mm intervals * Optional installation of 3,000 kg drop lashing shackles spaced approx. 600 mm apart – twelve 3,000 kg shackles included per side * Five side pockets per side for pipe stakes, 100 x 50 mm in the outer frame – pipe stakes not included in delivery * 30 mm phenolic plywood floor ----Drum supports: * 3 galvanized drum cradles secured via container locks, with lateral forklift pockets spaced 800 mm center-to-center (pocket width 185 mm) * Max. drum diameter 2,600 mm, max. drum width 1,650 mm * Clear width between support arms approx. 1,775 mm, with crossbracing * Each drum cradle supports up to 6,000 kg drum weight * Without drive or drum brake * Support arm with clamping lock for securing the drum shaft * Steel drum shaft, 76 mm diameter, with centering and rotating ends * 2 locating rings * 2 centering cones made of polyamide * 4 lashing eyes, each rated 3.2 t, on the support arms for the customer’s own securing of the drum against rotation and uncoiling ----Loading height: * Approx. 1,040 mm when loaded ----Paintwork: * Chassis, turntable, drawbar, external frame and underrun protection galvanized * Axles painted black ----Information: * Technical uplift to 30 t GVWR possible * New vehicle with manufacturer’s warranty * Subject to prior sale and errors * Immediately available ex Egestorf