Used Müller-Mitteltal Flatbed & Tarpaulin Trailers for sale (250)

Condition: new, Year of construction: 2026, New model, now with a total weight of 9,900 kg! Cable drum transport trailer. Permissible total weight 9,900 kg, payload approx. 7,000 kg (standard equipment). Hydraulic lifting and lowering of the cable drum either from the towing vehicle or using a separate engine (4-stroke petrol; 8.1 kW; electric start) with weather protection cover, hydraulic drum drive with rubber-coated drive rollers, drum diameter 800–3,000 mm, drum width up to approx. 1,650 mm, centering cones for cable drums. Two-speed support winch at the front, extendable rear support. BPW axle, EBS, parabolic suspension, tyres 315-80R22.5, tire pressure monitoring. 40 mm height-adjustable drawbar eye, two-line air, LED lighting 12+24 V. Toolbox, advertising panels in the side underrun protection. Vehicle fully hot-dip galvanized. New vehicle incl. factory warranty. Available from approx. CW 26-2026. (Archive photos) = Further information = Unladen weight: 2,900 kg Payload: 7,000 kg total weight: 9,900 kg Front tyres: 315-80R22.5 Country of manufacture: Germany Please contact Jan-Marc Schwickert for further information. Pgedpsyyhb Nefx Alqek

Condition: new, suspension: other, color: other, gearing type: other, driver cabin: other, emission class: none, Leveling bracket for low-loader semi-trailer including container closures, price per leveling bracket, , --  Subject to printing errors, mistakes and changes, sample images --, More information at: !, More details: ! Podsy H A Rxspfx Alqogk

Condition: used, empty load weight: 6,200 kg, maximum load weight: 23,800 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 11/2006, suspension: steel, tire size: 235/75R17,5 141/140J, color: other, gearing type: other, front tire size: 235/75R17,5 141/140J, rear tire size: 235/75R17,5 141/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing eyes, , --  Misprints, errors and changes reserved, Sample images --, More details at: !, More details: ! Pgedpfx Ajy Hh Icjlqjk

Condition: used, empty load weight: 4,190 kg, maximum load weight: 13,810 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2016, suspension: air, tire size: 385/55R22,5 160J, color: other, gearing type: other, front tire size: 385/55R22,5 160J, rear tire size: 385/55R22,5 160J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing eyes, 800 mm aluminum side walls, surcharge for ramps €800, -- misprints, errors and changes excepted, sample images --, More data at: !, More Details: ! Pjdjy Hc T Hjpfx Alqjgk

Condition: used, empty load weight: 3,680 kg, maximum load weight: 10,720 kg, overall weight: 14,400 kg, axle configuration: 2 axles, first registration: 11/2021, loading space length: 5,000 mm, loading space width: 2,420 mm, suspension: steel, tire size: 385/55R19,5 156J, color: other, gearing type: other, front tire size: 385/55R19,5 156J, rear tire size: 385/55R19,5 156J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, AS NEW, wide tyres, TIPPER BODY GALVANIZED, 12 lashing eyes, 600 mm side walls, surcharge for ramps 1,000 €, -- Subject to printing errors, mistakes and changes, sample images --, More data at: !, More details: ! Pgsdpey E H Ryefx Alqsk

Condition: used, empty load weight: 7,340 kg, maximum load weight: 22,660 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 05/2012, loading space length: 9,200 mm, suspension: steel, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length approx. 9,200 mm, loading height approx. 900 mm, 16 x lashing eyes, , Vehicle is sold on order , , , -- Subject to misprints, errors and alterations, sample pictures --, More data under: !, More Details: ! Pgodey Etpvspfx Alqjk

Condition: used, empty load weight: 8,850 kg, maximum load weight: 31,150 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 08/2019, suspension: steel, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Total loading platform length approx. 9,500 mm, lowbed loading platform length approx. 7,360 mm, loading height approx. 910 mm, 14 pairs of lashing eyes. Vehicle is offered on behalf of the customer. -- Subject to errors, misprints, and changes. Sample images -- More data at: !, More Details: ! Pgedpey Etl Djfx Alqek

Condition: used, empty load weight: 4,550 kg, maximum load weight: 13,450 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2016, loading space length: 6,540 mm, loading space width: 2,480 mm, suspension: air, tire size: 235 / 75 R 17,5, color: beige, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, 10 pairs of lashing eyes, loading height approx. 900 mm, , customer vehicle, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Pgsdsy Etlqjpfx Alqok

Condition: used, empty load weight: 6,500 kg, maximum load weight: 23,500 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 06/2010, suspension: steel, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Vehicle is sold on behalf of a customer, partly wooden boards def., 17 pairs of lashing eyes, , loading height approx. 900 mm, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Pjdpjy Etl Refx Alqegk

Condition: used, maximum load weight: 8,650 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 07/2017, next inspection (TÜV): 05/2026, loading space length: 6,250 mm, loading space width: 2,470 mm, loading space height: 900 mm, total width: 2,550 mm, Further information 400mm fold-down sideboards Pjdsy Hn D Ropfx Alqjgk - Spring-assisted sideboard lifters - Removable rear wall - Large lashing package - Perforated load bed rail - Height-adjustable front support leg - Foldable rear support legs - Plastic toolbox - BPW axles - Spring mesh ramps

Condition: new, maximum load weight: 9,070 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,010 mm, loading space height: 325 mm, Year of construction: 2025, * ETS-TA-B 11.9: * Wabco EBS (electronic braking system) * TPMS (tire pressure monitoring system) Pjdpfowyhzpox Alqsgk * Drum brakes, 2 x 5.5 t Gigant axles * Parabolic springs with compensating unit * Height-adjustable drawbar, approx. 300 mm * BPW landing gear * Mechanical drop supports at the rear * Plastic toolbox at the front right on the bulkhead * Side underrun protection * LED lighting * 50 mm softwood floor * One 6.3 t lashing point in the corners at the front bulkhead and rear end member, plus two 6.3 t UVV-compliant lashing rings recessed in the outer frame on each side * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,350 x 870 mm (20 mm inner spacing, ramps fixed and not movable) * Bulkhead, side walls, mudguards, and drawbar hot-dip galvanized * Axles, springs, air reservoir, and front landing gear painted in black * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Available immediately from Egestorf

Condition: new, maximum load weight: 13,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 700 mm, Year of construction: 2026, * KA-TA-RT 18.0: ----Brakes: * EBS (electronic braking system) * Emergency release device for spring-loaded brake cylinders * Drum brakes ----Suspension: * Air suspension with lifting/lowering system, including RTR valve and manual lowering for loading operations ----Drawbar / Flange Eye: Pgsdpfxevin T Sj Alqek * Drawbar with positive-locking height adjustment * 50 mm flange towing eye ----Electrics / Lighting: * 15-pin 24 V * LED tail lights, 12 / 24 V, mounted in underrun protection ----General Attachments: * Landing gear at front * Fold-out supports at rear * Plastic toolbox, approx. 750 x 350 x 300 mm, mounted on right-hand side * Plastic quarter mudguards ----Tipping Platform: * Steel pallet - 3-way tipper body made of fine-grain steel, with high-strength “M-Strong” side boards and reinforced 180 bar tipping cylinder * Fixed front wall, smooth sheet * Hardwood pad for excavator bucket, bolted to front wall * Continuous, fold-down side walls (without center stanchion), with tailgate spring lift and pendulum action via manual central locking * Bolted rear stanchions * Combination steel wing door rear wall, asymmetrically split (2-leaf), can swing 270° and lock, not fold-down; with additional pendulum frame for automatic tailgate opening during tipping, lockable via galvanized rotary rod and central lock; deactivation function for auto tailgate opening when tipping backwards with open wing door * 4 mm steel floor plate * 2-step access at front left * Rear ramp mounting rail ----Load Securing: * 1 x 7 t lashing point in each corner * 4 x 3 t recessed lashing rings per side, integrated in outer frame ----Loading Ramps: * Rear ramp compartments integrated into chassis * 1 pair of aluminum ramps (10 t / pair), approx. 3,570 x 410 mm, suitable for rubber-tyred and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, front wall, tipping platform, underrun protection, and rear fold-out supports hot-dip galvanized * Side walls coated with KTL; tailgate painted RAL 9010 pure white * Painting of side walls in a RAL shade available at extra cost * Axles, air reservoir, flange towing eye, and front landing gear painted black ----Info: * --Load securing certificate according to EN 12642 XL? * Subject to errors and prior sale ----Delivery time: * Available immediately ex Egestorf

Condition: new, maximum load weight: 13,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 700 mm, Year of construction: 2026, * KA-TA-RT 18.0: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering system, including RtR valve and manual lowering for loading operations ----Drawbar / Flange Towing Eye: * Drawbar with positively locking height adjustment * 50 mm flange towing eye ----Electrics / Lighting: * 15-pin 24 V connector * LED taillights 12 / 24 V integrated in underrun guard ----General Attachments: Pgjdpfxsvin Ucj Alqsk * Support windlass at front * External folding support legs at rear * Plastic toolbox approx. 750 x 350 x 300 mm mounted right side * Plastic quarter mudguards ----Tipper Body: * Steel pallet - 3-way tipper body made of fine-grain steel with high M-Strong sideboards and reinforced 180 bar tipping cylinder * Front wall fixed, made of smooth sheet steel * Hardwood support for excavator bucket mounted to front wall * Continuous side walls - drop-down (without center stanchion) with sidewall spring lifter and swinging function via manual central locking * Rear stanchions bolted * Combination steel-wing rear doors, double-wing, asymmetrically split, can swivel 270° and lockable (not drop-down), with additional swinging frame for automatic tailgate opening during tipping; lockable via galvanized rotary bolt and central locking; deactivation function for automatic tailgate opening when tipping backwards with doors open * 4 mm steel deck floor * Two-step entry on the front left * Rear mounting rail for loading ramps ----Load Securing: * Each corner fitted with 1 x 7 t lashing point * Each side fitted with 4 x 3 t lashing rings recessed into outer frame ----Loading Ramps: * Recessed shaft for loading ramps at rear chassis * 1 pair of aluminium loading ramps (10 t / pair), approx. 3,570 x 410 mm, suitable for rubber-tyred and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, front wall, tipper platform, underrun protection, rear support legs hot-dip galvanized * Sidewalls KTL-coated; tailgate painted in RAL 9010 pure white * Painted sidewalls in any RAL color available at extra charge * Axles, air tanks, flange towing eye, front support windlass painted in black tone ----Info: * --Load securing certificate according to EN 12642 XL? * Errors and prior sale excepted ----Delivery Time: * Immediately available ex works Egestorf

Condition: new, maximum load weight: 5,840 kg, overall weight: 9,900 kg, axle configuration: 1 axle, Year of construction: 2026, * KWH 9.9 ML: * RDÜ Tire Pressure Monitoring * EBS braking system * Drum brakes * BPW axle * Parabolic springs * Front landing gear * Spring-assisted square tube rear supports with base plate and safety locking pins for various support heights * Drawbar with 40 mm bolt-type towing eye (height adjustable, mm) * 15-pin power connector * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and cross beams * Enclosed steel mudguards with spray protection * Enclosed side underrun protection suitable for use as advertising space * Plastic toolbox with bottom insert (installed horizontally) approx. 500 x 350 x 400 mm * Swiveling cable drum superstructure, internal width between drum arms 1,700 mm – with tension lock for drum securing at the ends of supporting arms and centering lock for securing the cable drum superstructure to the chassis with a centrally positioned claw locking mechanism * Motor-hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated driving rollers * Hydraulic speed controller and brake for drum drive Pgjdpfxou I Iqxe Alqjk * Steel drum shaft with 76 mm diameter, centering and rotating ends * 1 pair of polyamide centering cones, stepped * Hydraulic pump unit with diesel engine * Fuel tank and manual starter * 6.5 HP with gear pump (150 bar) * Finish: hot-dip galvanized * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Immediately available from Egestorf

Condition: new, maximum load weight: 6,900 kg, overall weight: 9,900 kg, axle configuration: 1 axle, Year of construction: 2026, * KWH 9.9 ML: * RDÜ Tire Pressure Monitoring System * EBS braking system * Drum brakes * BPW axle * Parabolic springs * Front support jack * Spring-assisted rear square tube supports with base plate and safety locking pins for adjustable support heights * Towbar with 40 mm screw coupling eye (height adjustable) * 15-pin power connector * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubing and crossmembers * Enclosed steel mudguards with splash protection * Enclosed side underrun protection, usable as advertising space * Plastic toolbox with base lining (installed horizontally), approx. 500 x 350 x 400 mm * Swiveling cable drum structure, clear width between drum arms: 1,700 mm, with tension lock for securing the drum at the support arm ends as well as a central claw lock for fixing the cable drum structure to the chassis * Motor hydraulic drum drive with oil motor Podpfxou I Iqrs Alqegk * Valves and adjustable drive rollers with rubber coating * Hydraulic speed regulator and brake for drum drive * Steel drum shaft with 76 mm diameter, centerer and rotating ends * 1 pair of polyamide centering cones, stepped * Hydraulic power unit with Loncin petrol engine including manual and electric starter * Fuel tank and manual starter * 13 HP with gear pump (150 bar) * 315/80 R 22.5 tires * 2,690 kg unladen weight * Vehicle is hot-dip galvanized * New vehicle with full manufacturer's warranty * Subject to prior sale and errors excepted * Immediately available from Egestorf

Condition: new, maximum load weight: 6,900 kg, overall weight: 8,800 kg, axle configuration: 1 axle, Year of construction: 2026, * KWH 9.9 ML: * RDÜ Tire Pressure Monitoring System * EBS braking system * Drum brakes * BPW axles * Parabolic springs * Support winch at the front * Spring-assisted square tube stabilizer legs at the rear with base plates and safety locking pins for various support heights * Drawbar with 40 mm bolted towing eye (height adjustable) * 15-pin power connector * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and cross beams * Enclosed steel mudguards with splash protection * Enclosed lateral underrun protection usable as advertising space * Plastic toolbox with floor insert (horizontal installation), approx. 500 x 350 x 400 mm * Swivel-mounted cable drum frame, clear width between drum arms 1,700 mm – with clamp lock for securing the drum at the supporting arm ends and with a centrally located claw lock to secure the cable drum frame to the chassis * Motor-hydraulic drum drive with oil motor * Valves and movable, rubber-coated friction rollers Podpfju I Iqljx Alqjgk * Hydraulic speed regulator and brake for the drum drive * Steel drum shaft with 76 mm diameter, centering, and rotating ends * 1 pair of stepwise-offset centering cones made of polyamide * Hydraulic pump unit with diesel engine * Fuel tank and manual starter * 6.5 HP with gear pump (150 bar) * Finish: hot-dip galvanized * New vehicle with full manufacturer's warranty * Subject to error and prior sale * Immediately available ex Egestorf

Condition: new, maximum load weight: 6,900 kg, overall weight: 9,900 kg, axle configuration: 1 axle, Year of construction: 2026, * KWH 9.9 ML: * RDÜ tire pressure monitoring system * EBS braking system * Drum brakes * BPW axle * Parabolic springs * Front support winch * Spring-assisted square tube rear supports with base plates, safety lock pins for different support heights * Tow bar with 40 mm bolted towing eye (height-adjustable mm) * 15-pin power connector * LED lighting * Flashing LED side marker lights * Chassis made from torsion-resistant square tubing and crossbeams * Closed steel mudguards with spray protection * Enclosed side underrun protection, suitable for advertising * Plastic toolbox with floor insert (horizontal installation) approx. 500 x 350 x 400 mm * Swiveling cable drum structure, inner width between drum arms 1,700 mm, with clamp closure for drum securing at the end of carrier arms and centralized claw lock connecting structure to chassis * Motor-hydraulic drum drive with hydraulic motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft, 76 mm diameter, centered with rotating ends * 1 pair of polyamide centering cones, stepped design * Hydraulic pump unit with Loncin petrol engine, including hand and electric starter * Fuel tank and hand starter * 13 HP with gear pump (150 bar) * 315/80 R 22.5 tires Podpeu I Iqfjfx Alqsgk * 2,690 kg empty weight * Vehicle is hot-dip galvanized * New vehicle with full manufacturer's warranty * Errors and prior sale excepted * Immediately available from Egestorf * Sample images

Condition: new, maximum load weight: 6,900 kg, overall weight: 9,900 kg, axle configuration: 1 axle, Year of construction: 2026, * KWH 9.9 ML: * RDÜ tire pressure monitoring system * EBS braking system * Drum brakes * BPW axle * Parabolic springs * Front support windlass * Rear square tube supports with spring assistance and base plate, safety locking pins for adjustable support heights * Drawbar with 40 mm screwed towing eye (height adjustable mm) * 15-pin power connector * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and cross members * Enclosed fenders made of sheet steel with splash guards * Enclosed lateral underrun protection, usable as an advertising space * Plastic toolbox with base insert (installed lying down), approx. 500 x 350 x 400 mm * Swivel-mounted cable drum setup, clear width between drum arms 1,700 mm - with locking mechanism to secure the drum at the carrier arm ends and with central claw lock for securing the drum setup to the chassis Pgjdpfx Alsu I Iq Esqsk * Motor-hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed regulator and brake for drum drive * Steel drum shaft with 76 mm diameter, centering, and rotating ends * 1 pair of polyamide centering cones, stepped design * Hydraulic pump unit with diesel engine * Fuel tank and hand starter * 6.5 HP with gear pump (150 bar) * Finish: hot-dip galvanized * New vehicle with full manufacturer’s warranty * Subject to errors and prior sale * Available immediately ex Egestorf * Sample images

Condition: new, maximum load weight: 6,900 kg, overall weight: 9,900 kg, axle configuration: 1 axle, Year of construction: 2026, * KWH 9.9 ML: * TPMS (Tire Pressure Monitoring System) * EBS brake system * Drum brakes * BPW axle * Parabolic springs * Front support winch * Spring-assisted square tube supports at the rear with base plates and safety locking pins for adjustable support heights * Drawbar with 40 mm screw-in towing eye (height adjustable) * 15-pin electrical connector * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and cross beams * Closed steel mudguards with spray protection * Closed lateral underrun protection, usable as advertising panel * Plastic toolbox with floor insert (horizontal installation), approx. 500 x 350 x 400 mm * Swiveling cable drum mounting, clear width between drum arms: 1,700 mm, with tension lock for securing the drum at the ends of the carrier arms as well as central claw locking device to secure the drum assembly to the chassis * Motor-hydraulic drum drive with oil motor Podexyniwjpfx Alqogk * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft, 76 mm diameter, including centering and rotatable ends * 1 pair of polyamide centering cones, stepped * Hydraulic supply and return lines * Steel structure and hydraulics prepared for retrofitting a separate engine * 315/80 R 22.5 tires * 2,690 kg unladen weight * Vehicle is hot-dip galvanized * New vehicle with full manufacturer’s warranty * Subject to errors and prior sale * Immediately available from Egestorf

Condition: used, maximum load weight: 8,650 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 10/2016, Equipment: ABS, Welcome to Johanning's Commercial Vehicles, your specialist for recent and exclusive used vehicles. IMMEDIATELY available! Delivery possible. Pedpfx Aleycpd Asqogk Price on request! Financing & leasing options available on request. Location: 39606 Osterburg Brand: Mueller Mitteltal Model: TA-2 / ETUE-TA-R 11.9 Year of manufacture: 2016 Operating weight: 3,250 kg TÜV (inspection): March / 2026 SP (safety inspection): September 2026 For more pictures or videos, please request. Johanning's Commercial Vehicles, your partner for exclusive and recent used vehicles. Our services - Your benefits (after purchase) - Trade-in of your vehicle possible (any condition) - Immediate deregistration of your vehicle free of charge - Registration service for €150 (incl. fees, license plates) - Short-term registration - Viewing and test drive possible anytime by prior telephone appointment - Delivery to your door by arrangement possible. Errors and prior sale excepted.

Condition: used, axle configuration: 2 axles, total width: 25,000 mm, total height: 40,000 mm, Year of construction: 2014, Equipment: ABS, For inquiries regarding the vehicle, Mr. Seidel will assist you (by telephone). MÜLLER MITTELTAL SF32BM/BT Concrete Mixer Semi-Trailer Superstructure: Liebherr HTM 1004 10m³, BPW axles, drum brakes, spring-loaded brakes, Wabco ABS, 1st axle liftable, air suspension, permissible total weight: 32,000 kg, unladen weight: 6,510 kg, payload: 25,490 kg, tire tread depth: 1st axle 14-15mm, 2nd axle 10mm Upon request, we can provide you with a leasing or financing offer. Mr. Seidel (tel.) is happy to assist you. Further information can be found on our homepage. ... Subject to errors, changes, and prior sale!!! = Further Information = GVW: 32,000 kg Pgjdeyfu Sdepfx Alqjk Please contact Tobias Ebert for further information.

Condition: used, maximum load weight: 13,830 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 08/2020, next inspection (TÜV): 11/2026, Equipment: ABS, German vehicle from first owner accident-free Sideboards made of aluminium SAF axles Drum brakes well-maintained condition rent, purchase, hire-purchase Psdpfx Aley Haz Usqegk All-inclusive rental from €590 net per month possible (rental prices depend on contract duration) All information at Sample hire-purchase offer: €479 net per month with a 36-month contract period, a special hire-purchase down payment of €5,000 net, and a final instalment of €2,000 net. All prices are net plus VAT and subject to a positive credit assessment.

Condition: used, axle configuration: 3 axles, suspension: parabolic leaf (spring), tire size: 235-75R17.5, Year of construction: 2010, 3-axle low-loader trailer, accessible from the rear. Permissible total weight 30,000 kg, payload 22,700 kg. Loading area 8,900 mm (7,000 + 1,900) x 2,550 mm, warning package for oversize transport, 12 lashing rings and 8 stake pockets with simultaneous lashing option, 6 toolboxes. Two-part hydraulic ramps approx. 2,100 + 2,000 x 800 mm with rubber coating, hydraulic rear support legs. BPW axles, EBS, parabolic suspension with compensation unit, tires 235-75 R 17.5. Offset towing bar, swivel coupling eye 40 + 50 mm. Dual-circuit air (duomatik), dual-circuit hydraulics, 24 volt. Unladen loading height approx. 910 mm. Painted orange. MOT valid until 03-2027. = Further information = Pgjdoy Evvlepfx Alqjk Tire size: 235-75R17.5 Suspension: Parabolic suspension Curb weight: 7,300 kg Payload: 22,700 kg Gross vehicle weight: 30,000 kg Country of manufacture: DE Please contact Jan-Marc Schwickert for further information.

Condition: new, maximum load weight: 37,560 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Year of construction: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-assist for shunting purposes activated on the first axle via EBS (without truck-side installation) * Last axle is a trailing steered axle with electro-pneumatic steering lock * Trailing axle lock for shunting purposes activated from the cab via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering function plus RtR valve ----Electrics / Lighting: * Smart-Board information panel mounted on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED warning beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator circuit * Tire pressure monitoring with display option in truck via EBS signal (without truck-side installation) ----General Attachments: * Side underrun protection * Landing gear at front plus rear swing-down supports on the chassis * Straight steel mudguards * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign kits at front and rear * Swivel arm as a carrier for connection cables from truck to trailer ----Low Loader Deck: * Second king pin position * Saddle platform with 45° chamfered front corners and front toolbox made of galvanized, powder-coated sheet steel (W = 2,480 x H = 500 x L = 665 mm) with hinged lid Podpfxeykx Nke Alqogk * 400 mm high aluminum drop sides (painted in RAL color of choice) on saddle platform, foldable and removable * Removable rear wall -150 mm high * Rear slope at saddle platform to low bed approx. 700 mm long with chequer plate covering, as well as lashing bar with holes for attaching aluminum loading ramps * Saddle platform with 50 mm clamped timber planks and low bed platform with 60 mm clamped timber planks * Tread plate above the axles * 9 mechanical folding extensions to 3 m total width (not over rear slope; extension planks available, with closed transverse storage compartment under loading area) * Prepared for 3 mounting slots under saddle platform for storing optional aluminum loading ramps or timber planks for wheel well covers * Prepared for container locks on gooseneck ----Load Securing (LaSi Package): Saddle platform: * Perforated outer frame with 45°-angled holes for lashing points (2 t lashing force per point, minimum 480 mm apart) * 3 x 13.4 t lashing rings recessed into the floor on each side (one on the saddle platform, one on the longitudinal beams after the step, one over the middle axle next to the beam) Low Loader Platform: * 3 x 13.4 t lashing rings on the outer frame on each side (beginning of platform step, start and end of ramp slope) * 2 x 10 t lashing rings per side (between front wheel recess and 1st axle, between 2nd and 3rd axle) * 3 x 5 t lashing rings per side, bolted to the outer frames of the wheel recesses (2 at the front, 1 at the rear wheel recess) ----Excavator Arm Trough: * Extended excavator arm trough from the end of the last rigid axle over the steering axle up to the end crossmember, continuous with internal reinforcement, approx. W = 770 mm x Depth (rear ...

Condition: new, maximum load weight: 37,560 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Year of construction: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start assist for maneuvering purposes on the first axle, activated via EBS (no truck-side installation required) * Last axle is a trailing steering axle with electro-pneumatic steering lock Pgedpfjykx Nqox Alqok * Lock for the trailing axle, actuated from the driver's cab for maneuvering purposes via EBS (no truck-side installation required) ----Suspension: * Air suspension with raise/lower system and RtR valve ----Electrical / Lighting: * Smart-Board installed as an information tool on the trailer, with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12/24 V * Removable rear LED beacon * 2 additional LED reverse lights * 7-pin socket at rear for overlength lighting * Side marker lights with indicator actuation * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) ----General Attachments: * Side underrun protection * Landing gears at the front and swing-out supports at the rear * Straight steel fenders * Spare wheel carrier in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning panel sets at front and rear * Pivoting arm as a carrier for connection lines from the truck to the trailer ----Low Loader Bed: * Second kingpin position * Fifth-wheel platform with 45° chamfered front corners and front toolbox made of galvanized, powder-coated steel plate (W = 2,480 mm x H = 500 mm x L = 665 mm) with hinged lid * 400 mm high aluminum sideboards (RAL color of choice), foldable and removable on the fifth-wheel platform * 150 mm high plug-in rear wall * Rear slope on the fifth-wheel platform towards the low-bed, approx. 700 mm long with tread plate covering and a perforated bar at the end for hooking on aluminum ramps * Fifth-wheel platform with 50 mm clamped timber planks, and low-loader deck with 60 mm clamped timber planks * Tear plate over the axles * 9 mechanical swing-out extensions for total width of 3 m (not on rear slope), extension boards available with a transverse storage compartment under the loading area * Prepared for 3 insertion shafts under the fifth-wheel platform for storing either aluminum ramps or timber planks for wheel recess covers * Preparation for container locks on the swan neck ----Load Securing (LaSi Package): Fifth-wheel Platform: * Perforated outer frame, bent at 45°, with hole pattern for lashing equipment (2 t lashing force per lashing point at a minimum spacing of 480 mm) * On each side, 3 x 13.4 t recessed lashing rings in the floor (1 on the fifth-wheel platform, 1 on the longitudinal member after the neck step, 1 above the middle axle next to the longitudinal member) Low Loader Platform: * On each side, 3 x 13.4 t lashing rings on the outer frame (1 at the neck step of the fifth-wheel platform, 1 at the start of the ramp, 1 at the end of the ramp) * On each side, 2 x 10 t lashing rings (1 between the front wheel recess and the first axle, 1 between the 2nd and 3rd axle) * On each side, 3 x 5 t lashing rings bolted to the outer frame of the wheel recesses (2 at the front, 1 at the rear wheel recess) ----Excavator Arm Rest: * Extended excavator arm rest from the end of the last fixed axle over the steering axle up to the rear crossmember, continuous with internal reinforcement profile, approx. 770 mm wide x T at t