Low loader trailer

MÜLLER-MITTELTAL 18 t.Außenroller Container Anhänger, 2 in 1

Condition: new, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA 18.0: * 2 in 1 = for roll-off containers and as a low-loader ----Brakes: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10 ton axles ----Suspension: * Air suspension with lifting and lowering system, including RTR valve ----Drawbar: * Drawbar 2,000 mm long with 40 mm towing eye and adjustable height ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck via EBS signal (no truck-side installation required) * LED tail lights 12 / 24 V * 15-pin power connector ----General Attachments: * Toolbox made of powder-coated sheet steel approx. 1,000 x 300 x 600 mm * Storage box for container net made of galvanized sheet metal, 960 x 300 x 450/400 mm * Reflective contour tape on sides and rear * Side underride protection * Plastic quarter mudguards with spray protection * Plastic rear bumper buffers * Foldable A-sign at rear ----Loading Platform: * Main frame with raised outer frame for guiding roll-off containers * Steel plate floor with recessed roller tracks in the bogie area * Cont. length from 5,500 – 7,000 mm possible * Pneumatic 4-point locking clamps and mechanical removable stops at the front in the running track, load securing certificate according to DIN 30722-1 * Weld bead as anti-slip surface in the ramp run-up area * Mechanical drop-down supports at rear ----Load Securing: * 1 pair of 10 t UVV lashing rings at the front wall support * 3 pairs of 10 t UVV lashing rings on the sides of the outer frame * 4 x 2 t lashing eyes per side, cloverleaf design * 4 x 8 t recessed lashing brackets in the outer frame ----Ramps: Bedpfx Ajl Tpc Aoipown * 1 pair of aluminum loading ramps (10.6 t / pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Paintwork: * Chassis, bogie, locking components, and rear drop-down supports hot-dip galvanized * Drawbar, axles, and air reservoirs painted in a shade of black ----Information: * New vehicle, unregistered, with full manufacturer's warranty * Subject to errors and prior sale * Sample photos ----Delivery time: * Available approx. from week 43 / 2026

Condition: new, maximum load weight: 10,420 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 2,550 mm, loading space height: 1,030 mm, loading space volume: 20 m³, total width: 2,550 mm, total height: 1,030 mm, Equipment: ABS, WhatsApp: We have the largest selection of HÜFFERMANN roll-off/demountable container trailers in southern Germany in stock for you!! ALL TRAILERS ARE ARC GALVANIZED!!!!! 2-AXLE CENTRAL AXLE MINI CARRIER TRAILER - "HÜFFERMANN" MULTIFIX For transporting skip bins in accordance with DIN 30720 Weights Total weight (permissible) 13 t Total weight (technical) 13 t with a support load of 1 t Dimensions Frame length approx. 4,000 mm, for a skip bin up to 20 m3 Total width max. 2,550 mm Container contact height (in driving position) approx. 1,030 mm Frame Type HTM-3 1340 with Safetyfix brackets, single tires Welded steel frame construction made of high-strength steel Chassis for skip bins for rear loading Combined load securing, side centering fix, a few plug-in wedges with pendulum shoes on the front Attachment eyes on the side of the frame for Lashing chains Prepared for chainless load securing "Multifix" Closed sheet steel floor, between the longitudinal beams Frame attachments 1 pair of lashing points for a stacked skip bin 4 pairs of screwable 6.3t lashing brackets on the outer frame Skip bin securing Multifix for a skip bin Chainless load securing Multifix for a skip bin on the mini-carrier without press transport equipment Towing device Welded towing tube with screwed 40 mm towing eye, screwable/height adjustable +/- 200 mm Support device At the front 1 mechanical steel support winch with hand crank, one-sided operation on the left, 1 drop support at the rear Axles 2 BPW axles with disc brakes ø370 mm, load capacity 7 t/axle, for "E" tires Axle spacing 1,260 mm Wheels 4 tires 285/70 R 19.5, 143M CONTINENTAL 4 steel rims 8.25 x 19.5 silver Brake system/suspension Brake system in accordance with EC Directive 71/320 or ECE R13 Two-line compressed air brake system Brake system made by factory EBS system 2S2M, 2nd axle sensed Electronic braking and stability system EBS-E and RSS or TEBS G2 and RSP Spring-loaded parking brake on 2nd axle Aluminum air tank Brake/air connection lines with Duomatic quick coupling EBS/ABS connection cable Bracket for EBS and electrical plugs on the towing device Air suspension with lifting and lowering device Automatic adjustment to driving level from 15 km/h Assistance/safety systems Weight detection/axle load display via EBS CAN bus signal for display in the driver's cab (truck must be prepared accordingly, no calibrated scales) Lighting/electrics 24-volt lighting system in accordance with EC Directive 76/756/EEC 2 full LED module tail lights, "Hella brand" 2 LED position lights at the front 2 LED outline lights at the rear Flashing LED side marker lights, controlled by indicator signal LED license plate lights, integrated in the tail light Fixed connection cable with 1 x 15-pin plug 2 additional LED reversing lights, mounted on the rear left and right Paint Bwsdsi Aimrepfx Aipon Automatic blasted, arc galvanized, epoxy resin-based primer, Painting with 2K top coat using the electrostatic process Material doubling and transitions preserved with penetrating wax Chassis = RAL 9005 jet black Load securing elements = RAL 1003 signal yellow Drawbar/drawbar tube in chassis color = RAL 9005 jet black Wheel hubs black = powder-coated Underrun protection = galvanized Side collision protection = anodized Plastic parts black, unpainted P

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Centre axle can be lifted ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye & height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power socket * TPMS (Tire Pressure Monitoring System) ----General Fittings: * Toolbox made of powder-coated sheet steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized sheet steel (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with spray protection * Rear plastic impact protection bumpers Bodpfxetplv To Aipewn * Mechanical drop supports at the rear ----Container / Lowbed Platform: * Hot-dip galvanized main frame with raised outer rails (approx. 25 mm higher) to guide the roll containers * Steel floor with wheel recesses in the bogie area * When transporting roll-off containers: container length from 5,500 to 7,000 mm possible * Pneumatic 4-point locking system and mechanically insertable guide angles at the front of the tracks * Load certification according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Including 8 repositionable skip stops for lateral centering of the skips, front 4 skip stops inserted with pivoting stops ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the side for attaching tension elements to secure skips by force and form closure * 4 cloverleaf-style lashing cleats per side and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld bead as anti-slip surface in the run-up area of the ramp * 1 pair of aluminium approach ramps (16 t / pair), 2,800 x 400 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment accessible from the rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride Height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape at the sides & rear * Axles, slewing ring, drawbar and air tanks painted in a shade of black * Hot-dip galvanized main frame ----Info: * Permissible gross weight technically possible: 27,000 kg * New vehicle without initial registration, with manufacturer's warranty * Errors and interim sale subject to change ----Delivery Time: * Available from approx. week 47/2026

Condition: new, maximum load weight: 13,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA-Kombi 18.0: * 3-in-1 = for skip, roll-off containers, and as a low loader ----Brake System: * RDÜ Tire Pressure Monitoring System * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm towing eye and adjustable height mechanism ----Electrics / Lighting: * LED tail lights * 15-pin electrical connector * RDÜ (tire pressure monitoring), indication possible in the truck via EBS signal (no vehicle-side installation required) ----General Attachments: * Toolbox made of powder-coated sheet steel, mounted on the right side * Side underrun protection * Plastic quarter mudguards with spray protection * Storage box for container nets made of galvanized sheet metal, approx. 960 x 300 x 400 / 450 mm, right side * Rear plastic bumper pads * Mechanical drop-down supports at the rear ----Loading Area: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roll containers * Steel floor with recessed rollers in the bogie area * For roll-off container transport, container lengths from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking system and mechanical removable front guide blocks in the track, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * 8 repositionable skip stoppers for lateral centering of skips, front 4 stoppers inserted with pivoting stop * Weld bead as anti-slip coating in the approach ramp area ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning devices for friction-locked and form-fit securing of skips * 4 cloverleaf-type lashing brackets on each side * 1 pair of 13.4 t UVV lashing rings at the front ----Ramps: Bwedol Thwcjpfx Aipen * 1 pair of aluminum approach ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Info: * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Permissible gross weight technically up to 20,000 kg * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. calendar week 44 / 2026

Condition: new, power: 132 kW (179.47 HP), number of beds: 4, number of seats: 4, fuel type: diesel, gearing type: automatic, color: white, total length: 7,890 mm, total width: 2,320 mm, total height: 2,920 mm, overall weight: 4,500 kg, empty load weight: 4,040 kg, maximum load weight: 460 kg, wheelbase: 445 mm, Equipment: ABS, cruise control, fog lights, immobilizer system, traction control, Highlights: * Face 2 Face Safety: * 3rd brake light * ABS * Anti-slip regulation (ASR) * Electronic stability program (ESP) * Rear view camera * Summer tires * Immobilizer * Passenger airbag * Driver airbag Lighting: * LED headlights * Fog lights Comfort: * Heated exterior mirrors * Electrically adjustable exterior mirrors * Electric windows * Driver's seat height adjustable * Automatic climate control * Leather steering wheel * Multifunction steering wheel * Multimedia system * Cruise control * Central locking with remote control Radio/Navigation: * Bluetooth hands-free system * DAB+ digital radio * Hands-free system * Navigation system * USB connection Camper-specific: * Alcove/lift-up bed * Double floor * Single beds * Rear garage * Awning * Side seating area * Separate shower Bedpfx Ajv Dnd Hjipewn Other: * Alloy wheels Further description: Furniture décor "Navarra", upholstery "Pisa", décor "Lasca", Luminary package Integra 2-axle, navigation system with dual-lens RF camera, steering wheel with controls, pre-wiring for solar system, driver's cabin carpet, Fiat automatic transmission, 16" alloy wheels, exterior graphics carbon, chrome elements front/rear, LED turn lights, LED fog lights, flat screen holder front, flat screen pull-out rear, organization system rear garage, sound system, automatic climate control, leather steering wheel/gear knob, charging station Mobiltel, wireless, heat exchanger, comfort seats driver's cabin, Luminary-Plus package Integra 2-axle, multifunction socket, outdoor shower (cold/warm), gas outdoor socket, windshield wipers with winter parking position, rain sensor, lithium battery, awning 5.5 m, heated windshield, underfloor camera for tank emptying, document fee. ---- * We make every effort to describe the offered vehicle as accurately as possible. However, errors cannot be completely ruled out. Therefore, please address our sales staff specifically if you place particular importance on a specific feature. * Subject to prior sale and errors. ---- Model/Year of construction: 2024, New TÜV (technical inspection): yes, Internal ID: N0041660, Engine details: Euro6dT Final 8, Transmission: Automatic, Overall length: 789 cm, Unladen weight: 4040 kg, Payload: 460 kg, Sleeping areas: Rear (195x80) Rear (200x80) Lift-up bed (193x150), Seats with belt: 4, Wheelbase: 445 cm, Trailer load (braked): 1500 kg, Trailer load (unbraked): 750 kg, Heating: Alde WW heating, Refrigerator volume: 157 l, Freezer volume: 15 l, Fresh water tank: 140 l, Fresh water tank (incl. boiler): 160 l, Waste water tank volume: 100 l, Charger: 18 A, Battery: 100 Ah, Upholstery: Fabric, 230V sockets: 3, 12V sockets: 1, Additional features: New TÜV, CHASSIS: ASR, ABS, Fog lights, Central locking/remote control, Torque converter automatic, Electrically adjustable exterior mirrors, Jack, Fix & Go Kit, Multifunction steering wheel, Alloy wheels, Immobilizer, 3rd brake light, Cruise control, Heated exterior mirrors, Diesel tank 90 l, ESP incl. Hill-Holder, Driver airbag, Passenger airbag, BODY: Electric step, One-piece entrance door with window, Remis darkening side left+right, GRP body, Roller blind for windshield, Fly screen entrance door, Third brake light, Awning light, Opening windows all around, Awning, Garage door, Gas box, Window frames, Midi-Heki, Waste bin in door, INTERIOR: Cassette roller blinds, Fly screen entrance door, Front roller blind with electric drive, Fixed bed, KITCHEN: Extractor hood, AES refrigerator, 3-burner stove, Waste bin, SANITARY:

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axle: * 3 x 11 t Gigant axles * Center axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment system ----Electrics / Lighting: * LED tail lights * 15-pin electrical connector * Tire pressure monitoring system (TPMS) ----General attachments: * Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact protection buffers * Mechanical drop supports at the rear ----Container / Low loader platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) to guide roll containers * Steel floor with roller recesses in the bogie area * Suitable for transport of roll-off containers with lengths from 5,500 to 7,000 mm * Pneumatic 4-point clamp locking and mechanically insertable stop angles at the front in the guide rails Bodpfx Ajpk D Aweipewn * Loading certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 adjustable skip stops for lateral centering; the front 4 stops are inserted with a pendulum stop ----Load securing: * 3 pairs of 10 t UVV lashing rings on the side for attaching tensioning elements for positive and frictional securing of skips * 4 cloverleaf lashing slots on each side and 1 pair of 13.4 t UVV lashing rings facing forward * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 ----Ramps: * Weld bead as anti-slip surface in the ramp track area * 1 pair of aluminum approach ramps (16 t / pair) 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment at the rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides and rear * Axles, turntable, drawbar, and air tanks painted in black * Hot-dip galvanized main frame ----Information: * Technically permissible gross weight of 27,000 kg * New vehicle without initial registration, with manufacturer's warranty * Errors and prior sale reserved ----Delivery time: * Available from approx. calendar week 47/2026

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Centre axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm draw eye & height adjustment ----Electrics / Lighting: * LED tail lights * 15-pin electrical connector * TPMS (Tire Pressure Monitoring System) ----General Accessories: * Toolbox made from powder-coated steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear bumper pads * Mechanical drop-down supports at the rear ----Container / Low Loader Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roll-off containers * Steel floor with roller recesses in the bogie area * For roll-off container transport, container length from 5,500 - 7,000 mm possible * Pneumatic 4-point clamp locking and mechanical pin-in end stops at the front of the rails * Load certification to DIN 30722 - 1 * Transport of up to 2 skip containers with a max. volume of 10 m³ each possible * Includes 8 repositionable skip stops for lateral centring of the skips, front 4 stops with pendulum stops ----Load securing: * 3 pairs of 10 t UVV lashing rings on the sides for hooking in tensioning elements for both positive and non-positive securing of the skips * 4 lashing bars in cloverleaf design (on the sides) and 1 pair of 13.4 t UVV lashing rings to the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Welded seam as anti-slip surface in the ramp track area * 1 pair of aluminium loading ramps (16 t / pair) 2,800 x 400 mm suitable for rubber-tyred and chain-driven vehicles (lockable storage compartment access from rear) Bwedpfepk D Iiex Aipsn ----Tyres: * Tyres: 235/75 R17.5 ----Ride height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload: 18,900 kg ----Paintwork: * Reflective contour marking tape on the sides & rear * Axles, turntable, drawbar, and air tank painted in black * Hot-dip galvanized main frame ----Information: * Permissible gross weight of 27,000 kg technically possible * New vehicle without first registration, with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. CW 47/2026

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation at the rear * Side underrun protection * Rear swing-down supports on the chassis frame * Mechanically adjustable warning panel packages at front and rear * Front axle with closed plastic mudguards, rear axle with straight, galvanized steel fenders, each with splash guards * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for the toolbox on the bogie platform * Multi-voltage electrical system * LED tail lights * Removable warning beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * 15-pin power connector * Four stake pockets per side (no stakes included), each with integrated lashing options * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the bogie platform; 5 pairs of swiveling, retractable UVV lashing rings, loadable in all directions and recessed into the outer frame – 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for up to 3 m overall width (not in the rear taper) * Widening boards stored in the center of the load platform * Excavator arm rest over the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) * One-piece hydraulic loading ramps (approx. 3,000 x 720 mm) * 4-way valve block for later retrofitting of hydraulic ramp adjustment * Mechanical lateral ramp adjustment * Load platform over turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm Bwodpfx Asl Thxdsipen * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm approach slope) * Chassis, bogie, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in a black finish * 235/75 R 17.5 twin tires * Unladen weight: 5,900 kg * --Permissible gross weight technically up to 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Condition: new, maximum load weight: 13,490 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, TRA-Kombi 18.0: * 3 in 1 = for roll-off containers, skip containers, and as a low-loader ----Braking system: * EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10.5 ton axles ----Suspension: * Air suspension with manual rear lowering ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * TPMS (Tyre Pressure Monitoring System), displayable in the truck via EBS signal (no installation required on the truck side) * LED tail lights 12 / 24 V * 15-pin power connector ----General attachments: * Tool box made of powder-coated sheet steel * Spare wheel holder in basket design, right side * Closed side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact protection buffers * Foldable A-sign at rear ----Loading platform: * Hot-dip galvanized main frame with raised outer frame for guiding roll containers * Steel plate floor with roller recesses in the bogie area * Suitable for roll-off containers with length from 5,500 to 7,000 mm * Pneumatic 4-point clamp locking system and mechanically insertable stop angles at the front in the track * For transport of up to 2 skip containers with max. 10 m³ volume * Includes 8 plug-in skip stops for lateral centering of the skips, front 4 skip stops plug-in with swiveling stop * Weld bead as anti-slip coating in the ramp track area * Mechanical drop-down support legs at the rear ----Load securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and non-positive securing of skips; 4 clover-leaf lashing bars on each side * 1 pair of 13.4 t UVV lashing rings to the front * 4 x 8 t lashing eyes on each side, recessed into the outer frame Bjdpfowb Rakox Aipjwn ----Ramps: * Aluminum approach ramps (10.6 t / pair), 2,800 x 470 mm; suitable for rubber-tired and tracked vehicles (lockable storage compartment at rear) ----Paintwork: * Reflective contour tape on sides and rear * Frame hot-dip galvanized * Axles, drawbar painted black ----Information: * Load securing certificate according to DIN 30722-1 * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * --Permissible gross weight of 20,000 kg technically possible-- * New vehicle without initial registration with manufacturer warranty * Errors and prior sale excepted ----Delivery time: * Available immediately ex Egstorf

Condition: new, maximum load weight: 14,620 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Year of construction: 2026, * RA-T 18.0 / 018: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring * Emergency release device for spring-loaded cylinders * Disc brakes * 2 x 10 t BPW wide track axles * Air suspension (automatic lowering when decoupling the brake) * Drawbar approx. 2,300 mm long with 40 mm towing eye and height adjustment via tension spring & turnbuckle * Plastic toolbox 450 x 470 mm, right side Bwedpfxov Nulzj Aipjn * Side net box 1,000 x 500 x 500 mm * Enclosed plastic mudguards front & rear axle * Closed lateral underrun protection usable as advertising space * Rear underrun protection * Plastic rear impact bumpers * Hazardous goods sign on rear * 15-pin electrical connector * LED tail lights * Roller track length approx. 6,830 mm * Pneumatic 4-point clamp locking system * Mechanically adjustable stop angles (2 positions), front left and right on the tracks * 265/70 R 19.5 twin tires * 3,220 kg unladen weight * --Permissible gross weight of 20,000 kg technically possible-- * Approx. 1,130 mm ride height when loaded * Suitable for container lengths of 5,500 – 7,000 mm * Hot-dip galvanized chassis * Air tanks, axles, slewing ring and drawbar * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available approx. week 29 / 2026