Used Müller-Mitteltal Lowbed Semitrailers for sale (251)

Condition: new, maximum load weight: 38,290 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 8,500 mm, loading space width: 2,520 mm, Year of construction: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Rear axle self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering function including RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as info tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12/24V * Removable LED beacon at the rear left ----General accessories: * Side underrun protection * Support legs at the front and mechanical swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder mounted under the chassis on the right-hand side ----Lowbed platform: * Fifth wheel platform with 45° chamfered front corners and front-mounted tool box made of galvanized steel, W = 2,480 x H = 500 x L = 665 mm, with foldable lid * 400 mm high foldable and removable aluminium drop sides (RAL 9010 pure white) on the side of the fifth wheel platform * Removable rear panel, 150 mm high * Rear slope on the fifth wheel platform to the lowbed approx. 700 mm long * Fifth wheel platform with 50 mm wooden planks, lowbed platform with 60 mm wooden planks * Tread plate above the axles ----Widenings: * 8 x mechanical fold-out extensions for total width of 3 m (not on the rear slope; extension boards included with storage on the fifth wheel platform) * Mechanically adjustable warning board kits front and rear ----Load securing (Lasi package): * On the fifth wheel platform, 2 x 6.3 t lash rings each, and 3 x 5 t lashing bars on the side in the outer frame * On the side of the lowbed platform, 2 x 13.4 t lashing rings each, plus 4 x 10 t pivoting and lowerable lashing rings embedded in the outer frame * On the side, 2 x 6.4 t lashing eyes each, and 1 lashing ring at the rear in the excavator boom rest * 2 x container locks directly after the drop in the lowbed platform ----Excavator boom rest: * Continuous excavator boom rest from the end of the last rigid axle over the steering axle to the rear cross member, with internal reinforcement profile, approx. L = 2,450 x W = 770 x D = 270 mm ----Loading ramps: * Mechanical one-piece hot-dip galvanized hydraulic loading ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for later customer retrofitting of hydraulic ramp shifting * The outer board of the loading ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the drive-on slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck from 40 to 120 l/min) ----Loading dimensions: Hedpfopk D I Aex Aa Soff * Fifth wheel platform loading area: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Loading height unladen: approx. 910 mm (incl. 860 mm drive-on slope) ----Fifth wheel height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Painting: * Chassis, loading ramps, rear swing supports, extension consoles hot-dip galvanized * Axles, support legs, air tanks painted black * Vehicle is fully hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample pictures may show equipment not included with the offered vehicle ----Delivery time: * Available from week 26/2026

Condition: new, maximum load weight: 38,290 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 8,500 mm, loading space width: 2,520 mm, Year of construction: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: Hfedpfx Aasl Tnvgo Sjf * 3 x 11 t BPW Eco Plus axles * Last axle is self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lifting and lowering system as well as RtR (Raise-the-Roof) valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as an info tool, with pressure sensors for total axle load display * 15-pin power plug * LED lighting system 12 / 24V * Removable LED beacon at the rear left ----General Fittings: * Side underrun protection * Support winches at the front and mechanical swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder under the chassis on the right side ----Lowbed Area: * Saddle platform with 45° chamfered front corners and front toolbox made from galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm, with hinged lid * 400 mm aluminium drop sides (RAL 9010 pure white) on the sides of the saddle platform, foldable and removable * Rear wall inserted, 150 mm high * Rear incline on the saddle platform to the lowbed, approx. 700 mm long * Saddle platform with 50 mm timber planks and lowbed platform with 60 mm timber planks * Tread plate above the axles ----Extensions: * 8 x mechanical fold-out extensions up to a total width of 3 m, not on the rear incline (extension planks available and stored on the saddle platform) * Mechanically adjustable warning sign packages front and rear ----Load Securing (Lashing Package): * On the saddle platform: 2 x 6.3 t lashing rings each, as well as 3 x 5 t lashing rods on each side of the external frame * On the lowbed platform: 2 x 13.4 t lashing rings on each side, as well as 4 x 10 t lashing rings, swingable and lowerable, embedded in the external frame * On each side: 2 x 6.4 t lashing eyes, and 1 lashing ring at the excavator stick recess at the rear * 2 x container locks directly after the step in the lowbed platform ----Excavator Stick Recess: * Excavator stick recess from the end of the last fixed axle, over the steering axle, up to the rear cross member, continuous with internal reinforcement profile, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Access Ramps: * Mechanical one-piece, hot-dip galvanized hydraulic access ramps approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for future customer installation of hydraulic ramp shifting * The outer board of the ramp consists of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach incline ----Hydraulics: * Hydraulic flow divider in the trailer (for truck hydraulic pump capacity from over 40 l/min up to 120 l/min) ----Load Dimensions: * Loading surface of the saddle platform: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Loading height unladen approx. 910 mm (incl. 860 mm approach incline) ----Fifth Wheel Height: * approx. 1,220 mm (suitable for 2- and 3-axle tractors) ----Paintwork: * Chassis, ramps, rear folding supports, widening adapters hot-dip galvanized * Axles, support winches, air tanks painted black * Vehicle is hot-dip galvanized ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images may show equipment not included in the offered vehicle ----Delivery Time: * Available from week

Condition: used, maximum load weight: 4,960 kg, overall weight: 10,500 kg, first registration: 04/1993, next inspection (TÜV): 01/2026, loading space length: 6,260 mm, loading space width: 2,430 mm, loading space height: 2,430 mm, loading space volume: 37 m³, 2-axle tandem refrigerated trailer, 7 m, with 1-ton tail lift. * THERMOKING LND-II MAX (diesel engine) and standby cooling 380 V ELECTRIC Hfedpeykxflsfx Aa Sef * Vehicle No. for customer inquiries: 4593 No liability for typographical or printing errors. Sale exclusively to commercial customers. Subject to prior sale and changes. Errors and interim sales expressly reserved. The description serves for vehicle identification and does not constitute a warranty within the meaning of sales law. The wording of the sales contract is decisive. * TOP SERVICE & QUALITY * We are happy to provide you with a LEASING-FINANCING-HIRE PURCHASE offer * Warranty insurance available upon request from the insurer * TÜV / UVV tail lift inspections / tachograph check and installation of OBU device possible via our local partners * Customs plates for 30 days * All export customs documents can be provided but must be requested separately * TOLL registration for Toll-Collect can be booked in-house * Complimentary transfer from Stuttgart Airport or Metzingen train station (Württ) * TRAIN STATION FOR ARRIVAL: 72555 METZINGEN/WÜRTT. * FOR ENGLISH * Andreas Pittas * Thomas Pittas * Alexander Pittas * Robin Pittas WHATSAPP Number * * ---- Visit our website at * Over 200 vehicles in stock at all times

Condition: new, maximum load weight: 8,750 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, Equipment: ABS, tail-lift, Reference number for inquiries: 11599 * BRAND NEW VEHICLE now in stock and available immediately in Alsdorf * Versatile use: construction, landscaping, agriculture, and forestry – can be used as a tipper or low-loader Müller-Mitteltal KA-TA-R 11.9 Tandem Low-loader Three-way Tipper Trailer with Ramps * Tyres: 385/55 R19.5 (4x), BPW Axles, Parabolic springs, Drum brakes * Tyre pressure monitoring * GVW: 11,900 kg, payload: 8,750 kg * EBS Multi-voltage system for towing vehicles with 12 and 24 Volt electrics (e.g., agricultural and forestry vehicles) * Side marker lights with indicator actuation * LED lighting system for 12+24 Volt with 1x 15-pin connection cable and 1 additional connection cable as standard, 12 Volt 13-pin version with blank sockets for both electric plugs * Galvanized floor, 5m x 2.42m x 0.5m; side panels laser-welded, swinging, folding and removable, pre-configured for later retrofitting of side panel extensions * Lockable compartment under the tipping bridge for loading ramps * incl. aluminium ramps, 8t load capacity, 3.57m long, stored in ramp compartment under the tipping platform * Front wall hot-dip galvanized * 4 UVV lashing rings LC 5000daN front and rear + 8 lashing eyes LC 3000daN recessed and foldable in the tipper floor (centered) * Drawbar infinitely height-adjustable, hot-dip galvanized, 40mm towing eye Hsdpfxjyhtwwo Aa Soff * Net hooks * Bolted, galvanized rear stanchions * * We are an official Müller-Mitteltal dealer! Contact us for an offer! * e.g., €519 net per month for 60 months without down payment, zero final installment. Financing offered by our partner FM LeasingPartner ----Our business hours: Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside of business hours, appointments can be arranged by request. We speak German, English, Polish, and French. WhatsApp Leasing, financing, and trade-in possible----

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Center axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye & height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin electrical connector * TPMS (Tire Pressure Monitoring System) ----General Equipment: * Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear bump stops * Mechanical drop down stands at rear ----Container / Low Loader Deck: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) to guide the roll-off containers * Steel sheet floor with roller recesses in the bogie area * For roll-off container transport, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking as well as mechanical plug-in stops at the front in the running rails * Load certificate according to DIN 30722-1 * Transportation of up to 2 skip containers with a maximum of 10 m³ volume possible * Includes 8 repositionable skip stops for lateral centering of skips, front 4 skip stops plug-in with pendulum-mounted stop ----Load securing: * 3 pairs of 10 t UVV lashing rings at the sides for attaching tensioning elements for positive and non-positive securing of the skips * 4 side lashing bars in cloverleaf design and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld beads as anti-slip surface on the approach ramp running rail * 1 pair of aluminium approach ramps (16 t / pair), 2,800 x 400 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment from the rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: Hfedpfx Aaopk D Iis Sof * Reflective contour tape on sides and rear * Axles, turntable, drawbar and air tank painted in black tone * Hot-dip galvanized main frame ----Info: * Technically permissible total weight of 27,000 kg possible * New vehicle, unregistered, with manufacturer warranty * Subject to prior sale and errors excepted ----Delivery time: * Available from week 20/2026

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Center axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye & height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin electrical connector * TPMS (Tire Pressure Monitoring System) ----General Equipment: * Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear bump stops * Mechanical drop down stands at rear ----Container / Low Loader Deck: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) to guide the roll-off containers * Steel sheet floor with roller recesses in the bogie area * For roll-off container transport, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking as well as mechanical plug-in stops at the front in the running rails * Load certificate according to DIN 30722-1 * Transportation of up to 2 skip containers with a maximum of 10 m³ volume possible * Includes 8 repositionable skip stops for lateral centering of skips, front 4 skip stops plug-in with pendulum-mounted stop ----Load securing: * 3 pairs of 10 t UVV lashing rings at the sides for attaching tensioning elements for positive and non-positive securing of the skips * 4 side lashing bars in cloverleaf design and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld beads as anti-slip surface on the approach ramp running rail * 1 pair of aluminium approach ramps (16 t / pair), 2,800 x 400 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment from the rear) Hsdpfx Ajpk D Awoa Sjff ----Tyres: * Tyres: 235/75 R17.5 ----Ride height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides and rear * Axles, turntable, drawbar and air tank painted in black tone * Hot-dip galvanized main frame ----Info: * Technically permissible total weight of 27,000 kg possible * New vehicle, unregistered, with manufacturer warranty * Subject to prior sale and errors excepted ----Delivery time: * Available from week 20/2026

Condition: new, maximum load weight: 10,360 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-ER 14.4: ----Brakes: * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * Gigant axles ----Suspension: * Air suspension with lifting and lowering function ----Drawbar / Flange Towing Eye: * Drawbar height adjustable by 300 mm * 40 mm flange towing eye ----Electrics / Lighting: * Tire Pressure Monitoring System (TPMS) with display capability in the truck via EBS signal, no truck-side installation required * LED lighting system * 15-pin power connector ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized, folding rear supports * Plastic toolbox mounted on the front right exterior of the bulkhead * Lateral underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood flooring * Pre-installed fittings for later mounting of 20" container locks front and rear * Bolted smooth sheet steel front wall * Trapezoidal profile steel sheet side walls, foldable with drop side spring assist * Bolted, hot-dip galvanized rear stanchions Hjdpfxjndpn Ss Aa Ssff ----Load Securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing force every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible * One 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross members for 1.2 t lashing options ----Ramps: * 1 pair aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles, stowed from the rear in a compartment recessed under the loading area in the chassis ----Painting: * Hot-dip galvanized chassis, drawbar, front wall and rear wall * Complete vehicle hot-dip galvanized ----Info: * New vehicle with manufacturer's warranty * Subject to alteration and prior sale ----Delivery Time: * Available immediately ex Egestorf

Condition: new, maximum load weight: 10,360 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-ER 14.4: ----Brakes: * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * GIGANT axles ----Suspension: * Air suspension with lift and lowering system ----Drawbar / Flange drawbar eye: * Height-adjustable drawbar (adjustable by 300 mm) * 40 mm flange drawbar eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System with display option in the truck via EBS signal—no truck-side installation required) * LED lighting system * 15-pin power connector ----General attachments: Hfjdpfjpk D Dqjx Aa Sof * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Plastic toolbox mounted on the front wall, right-hand side * Side underrun protection * Plastic quarter mudguards ----Lowbed platform: * 50 mm softwood floor * Preparation for subsequent installation of 20" container locks at the front and rear * Bolted front wall, smooth sheet steel * Drop sides made of trapezoidal-profile sheet steel, foldable with sideboard spring assist * Bolted, hot-dip galvanized rear stakes ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to fit 3 t folding lashing rings every 600 mm * One 6.3 t lashing point at each front and rear corner * Various holes in the front wall and end crossmember for 1.2 t lashing options ----Ramps: * 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t per pair), suitable for rubber-tired and tracked vehicles; storage compartment underneath the loading platform integrated in the chassis for rear access ----Paintwork: * Chassis, drawbar, front wall, and rear wall hot-dip galvanized * Entire vehicle hot-dip galvanized ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex Egestorf

Condition: new, maximum load weight: 14,550 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Year of construction: 2026, * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * 19.5" disc brakes * Automatic braking when opening the cross-bracing units * 2 x 10 t BPW wide track axles * Air suspension (automatic lowering when brake is uncoupled) * Tire pressure monitoring with in-cab display via EBS signal—no truck-side installation required * Pneumatically lowerable drawbar, 1,800 mm long, with 40 mm towing eye and height adjustment via tension spring and turnbuckle * Plastic toolbox, 858 x 500 x 500 mm, mounted right side * Container net storage box made of galvanized perforated sheet, 1,000 x 500 x 500 mm, side-mounted * Enclosed plastic mudguards front and rear * Closed side underrun protection (RAL 9010 pure white), suitable as advertising space Hfedpfel Tn U Rex Aa Ssf * Rear underrun protection * Rear plastic impact buffers * Folding "A" warning plate * Hazardous goods sign with accompanying document pocket and reflective rear parking warning sign * 15-pin power connector * LED lighting system with protective cover * 2 LED reversing lights (activated by reverse gear) * Additional front loading with rear running rail lowering and removable stops * Roller recesses in the area of the turntable with mechanically adjustable stop angles (2 positions) at the front left and right on the running rails * Roller rail length approx. 6,830 mm * Pneumatic 4-position clamp lock * For transporting external roll containers according to DIN 30722 Part 1—DEKRA load securing certificate available * Loaded floor height approx. 1,130 mm * Chassis and locking components hot-dip galvanized * Air tanks, axles, turntable, and drawbar painted in black * --Permissible gross weight of 20,000 kg technically possible-- * New vehicle without first registration, includes manufacturer's warranty * Subject to errors and prior sale * Available approx. from calendar week 21/2026 * Sample images

Condition: used, mileage: 1,100 km, gearing type: other, color: white, overall weight: 32,000 kg, empty load weight: 6,600 kg, maximum load weight: 25,400 kg, tire size: 425/65R22,5, first registration: 03/2016, suspension: air, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, BPW axles, air-sprung, 1st axle liftable, ABS (anti-lock braking system), U-protection, supports Body: Liebherr concrete mixer type HTM 1004 approx. 10m³ 2x 10t BPW axles! Suitable hydraulics for engine power take-off on towing vehicle available at extra charge! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Hfedoi Rk Axopfx Aa Sof - .

Condition: used, empty load weight: 5,100 kg, maximum load weight: 14,900 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 02/1997, loading space length: 8,200 mm, loading space width: 2,500 mm, loading space height: 900 mm, suspension: steel, tire size: 235/75R17.5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 2-axle, SAF axles, turntable, leaf spring suspension, lashing eyes, mechanical ramps, rear support, side aluminum undercarriage, twin tires. Construction: 2-axle low-loader trailer with mechanical ramps, 2x SAF axles, drum brakes! Hedpfx Aev R Hmaja Soff Loading height approx. 900mm! Ramp length approx. 2650mm! ACCESSORIES INFORMATION IS SUBJECT TO GUARANTEE. Subject to change, prior sale, and errors! - .

Condition: used, empty load weight: 2,910 kg, maximum load weight: 7,590 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 09/2009, next inspection (TÜV): 04/2025, loading space length: 4,500 mm, loading space width: 2,200 mm, loading space height: 450 mm, suspension: steel, tire size: 235/75R17.5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel body, 2 axles, BPW axles, tandem, leaf spring suspension, ABS (anti-lock braking system), lashing eyes, underbody protection, front support, rear support, swing flaps. Hfjdpfx Ajv S H Sfea Sef Construction: Tandem 3-way tipping trailer with ramp shaft. Loading ramps available for an additional charge of €900.00 net! ACCESSORIES INFORMATION IS PROVIDED WITHOUT GUARANTEE. Subject to changes, prior sale, and errors! - .

Condition: used, empty load weight: 3,110 kg, maximum load weight: 9,490 kg, overall weight: 12,600 kg, axle configuration: 2 axles, first registration: 05/2016, next inspection (TÜV): 02/2025, loading space length: 4,550 mm, loading space width: 2,380 mm, loading space height: 600 mm, suspension: steel, tire size: 285/70R19.5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel construction, 2 axles, turntable, leaf springs, ABS (anti-lock braking system), lashing eyes, storage box, pendulum flaps Construction: 2-axle 3-way tipping trailer Gigant axles, drum brakes, frame hot-dip galvanized! Hodpswth Iisfx Aa Soff Loading height approx. 1290mm! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! - .

Condition: used, empty load weight: 2,230 kg, maximum load weight: 3,770 kg, overall weight: 6,000 kg, axle configuration: 2 axles, first registration: 02/1984, loading space length: 4,000 mm, loading space width: 2,000 mm, loading space height: 500 mm, suspension: steel, tire size: 10.5-20, color: green, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, 2-axle, BPW axles, tandem, leaf suspension, ABS (anti-lock braking system), lashing eyes, U-protection, front support, rear support, pendulum flaps, height-adjustable drawbar Body: 3-sided tipper trailer with towing jaw and brake connections (red, yellow) ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Hfodpfx Aeuxd Rpja Sef - .

Condition: used, empty load weight: 3,650 kg, maximum load weight: 10,750 kg, overall weight: 14,400 kg, axle configuration: 2 axles, first registration: 07/2011, next inspection (TÜV): 08/2024, loading space length: 5,000 mm, loading space width: 2,430 mm, loading space height: 900 mm, suspension: air, tire size: 285/70R19.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, tandem, air-suspended, ABS (anti-lock braking system), flap, lashing eyes, U-protection, front support, rear support, pendulum flaps, height-adjustable drawbar Body: Tandem 3-sided tipper trailer with aluminum drop sides 2x Gigant axles, drum brakes! Hfsdpfx Aaeth Uavs Sof Drive-on ramps available for an extra charge of 990.00€ net! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, empty load weight: 6,500 kg, maximum load weight: 23,500 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 01/2008, next inspection (TÜV): 03/2024, loading space length: 8,000 mm, loading space width: 2,520 mm, loading space height: 910 mm, suspension: steel, tire size: 235/75R17.5, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, leaf suspension, 3-axle, BPW axles, turntable, ABS (anti-lock braking system), lashing eyes, hydr. ramps, rear support, aluminum side bumpers, twin tyres, storage box Superstructure: Hydr. ramps, can be widened to 3m. BPW axles, drum brakes, lashing rings on the outside. Ramp length approx. 4000mm! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Hfodpfx Asqpgtmja Ssf - .

Condition: used, empty load weight: 2,700 kg, maximum load weight: 7,300 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 02/2007, loading space length: 5,020 mm, loading space width: 2,460 mm, loading space height: 400 mm, suspension: steel, tire size: 235/75R17.5, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, BPW axles, tandem, leaf suspension, ABS (anti-lock braking system), lashing eyes, mechan. Ramps, front support, storage box, height-adjustable drawbar Body: Tandem low loader trailer with mechanical ramps 2x BPW axles, drum brakes! Loading height approx. 930mm! Ramp length approx. 2600mm! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Hfodpfx Aaswvikqj Sof - .

Condition: used, maximum load weight: 14,300 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 07/2023, next inspection (TÜV): 11/2026, Year of construction: 2023, * HL - TA 20.0 ---- Brakes: * Wabco EBS-E braking system * Emergency release device for spring brake cylinders * Drum brakes * Duomatic brake coupling ---- Axles: * 2 x ton SAF axles * 1st axle as lift axle (fully automatic) * Lift axle with +30 mm driving height via control cylinder * Start-up assist function for maneuvering and forced lowering onto the first axle—controlled via speed-dependent EBS electronics—(no truck-side installation necessary, includes cable for operation from the tractor) ---- Air Suspension: * Air suspension with lowering function via remote control ---- Drawbar / Flange Eye: * 50 mm flange-mounted drawbar eye — height adjustable by +77 mm and -33 mm — for 2 tons vertical load Hedsyfy Rrjpfx Aa Soff ---- Electrical / Lighting: * 15-pin power plug * 3-pin 12V auxiliary connector * LED lighting system 12 / 24V * 2 LED reversing lights activated by reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connection cables for agricultural and forestry vehicles * Power supply for remote control: 12+24 V via tail light ---- General Accessories: * BPW landing gear at front * Mechanically extendable underrun protection for containers over 6,000 mm in length * Speedline diamond aluminum rims * Detachable towing pin coupling (use only when underrun protection is retracted) * Enclosed plastic half-shell single mudguards * Two-step access in front of the front wall on the left * Shovel and broom holder in front of the front wall * 2 stainless steel toolboxes, matt finish, approx. 650 x 350 x 320 mm, right side * Enclosed side impact protection usable as advertising surface ---- Hydraulics: * 2-circuit hydraulic connections (engine-side from truck/tractor) designed for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted on the right side at the front wall) operated via remote control ---- Hook Lift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (serial no. 100746129, year 2023) * Base frame made of high-strength fine-grained steel * 20,000 kg pull force * Hook height 1,570 mm * Hooklift operation via remote control * Remote control with fast function for lowering, not for lifting * Emergency stop buttons, left and right sides * Container bearing with 4 lateral supports each side and 1 roller at the rear * Hydraulic internal locking mechanism at the rear * 2 additional hydraulic cylinders to assist lifting the main arm * 2 mechanical drop-down supports at the rear * Approved for 20 tons gross weight (2 x 9 tons axles) and 2 tons vertical load * Note: If the remote control is outside the charging cradle, the service brake must be engaged to activate the remote control. Brake connections must remain connected to open hydraulic/pneumatic valves * Monitoring system for underrun protection to ensure it is retracted during tipping ---- Loading Height: * Unladen, approx. 1,300 mm with lowered lift axle ---- Paintwork: * Chassis, drawbar, access steps, underrun protection, and support legs are hot-dip galvanized * Axles, air tanks, and front landing gear are painted in black * Palfinger hooklift painted black/yellow ---- Information: * Subject to errors and prior sale * Vehicle is in very good / as-new condition ---- Container Dimensions: * Internal length: 5,500 mm * Internal width: 2,300 mm * Internal height: 1,000 mm Info: * Mounting lugs for hooklift systems present

Condition: new, maximum load weight: 10,900 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * Wabco EBS * RDÜ Tire Pressure Monitoring System Hedpsl Th A Ejfx Aa Seff * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7-ton Gigant axles * Parabolic springs with tandem compensating unit * 300 mm height-adjustable hot-dip galvanized drawbar with 40 mm flange drawbar eye * Jost mechanical landing gear at the front * 2 mechanical hot-dip galvanized folding supports at the rear * 15-pin power connector * LED taillights * Hot-dip galvanized bolted underrun protection * Toolbox made of galvanized sheet steel on the right side * Plastic quarter fender * Hot-dip galvanized chassis * Steel pallet, 3-way tipping body * Continuous side walls with inner tube reinforcement at the top - without center stanchions - foldable with side wall spring jack * Tailgate foldable and swinging via manual Central locking system * Hot-dip galvanized bolted rear stanchions * 1 x 5-ton lashing ring in each corner and 4 x 3-ton lashing rings on each side. Lashing eyes embedded in the outer frame * 4 mm sheet metal floor made of fine-grain steel * Net hooks, rear mounting rail for the landing ramps * Preparation for later retrofitting of side wall extensions * Reinforced body with load securing certificate according to EN 12642 XL * 2-step step on the left side as a climbing aid * 1 pair of aluminum landing ramps approx. 3,570 x 400 mm (load capacity 8 tons per pair) suitable for rubber-tired and tracked vehicles * Rear-locking storage compartment embedded in the chassis below the loading area * Axles, springs, air tanks, and landing gear painted in a black tone * Chassis, drawbar, floor, front wall, and folding bags are hot-dip galvanized * New vehicle without first registration and with manufacturer's warranty * Tires 385/55 R 22.5 * Side walls painted in RAL 9010 pure white * Paint finish Side panels available in a RAL color for an additional charge * Errors and prior sale subject to change * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 10,900 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * Wabco EBS * RDÜ Tire Pressure Monitoring System * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7-ton Gigant axles * Parabolic springs with tandem compensating unit * 300 mm height-adjustable hot-dip galvanized drawbar with 40 mm flange drawbar eye * Jost mechanical landing gear at the front * 2 mechanical hot-dip galvanized folding supports at the rear * 15-pin power connector * LED taillights * Hot-dip galvanized bolted underride protection * Toolbox made of galvanized sheet steel on the right side * Plastic quarter fender * Hot-dip galvanized chassis * Steel pallet, 3-way tipping body * Continuous side walls with inner tube reinforcement at the top - without center stanchions - foldable with side wall spring jack * Tailgate foldable and swinging via manual Central locking system * Hot-dip galvanized bolted rear stanchions * 1 x 5-ton lashing ring in each corner and 4 x 3-ton lashing rings on each side. Lashing eyes embedded in the outer frame * 4 mm sheet metal floor made of fine-grain steel Hfsdpfx Ajv Dz N Noa Sjf * Net hooks, rear mounting rail for the landing ramps * Preparation for later retrofitting of side wall extensions * Reinforced body with load securing certificate according to EN 12642 XL * 2-step step on the left side as a climbing aid * 1 pair of aluminum landing ramps approx. 3,570 x 400 mm (load capacity 8 tons per pair) suitable for rubber-tired and tracked vehicles * Rear-locking storage compartment embedded in the chassis below the loading area * Axles, springs, air tanks, and landing gear painted in a black tone * Chassis, drawbar, floor, front wall, and folding bags are hot-dip galvanized * New vehicle without first registration and with manufacturer's warranty * Tires 385/55 R 22.5 * Side walls painted in RAL 9010 Pure White * Painting of the side panels in a RAL color is available for an additional charge. * Errors and prior sale subject to change. * Available for immediate delivery from Egestorf.

Condition: used, maximum load weight: 14,300 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 07/2023, next inspection (TÜV): 11/2026, Year of construction: 2023, * HL - TA 20.0 ----Brakes: * Wabco EBS-E brake system * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake connector ----Axles: * 2 x tons SAF axles * 1st axle is a lift axle (fully automatic) * Lift axle with +30 mm driving height via actuator cylinder * Start-off assistance for shunting and forced lowering on the first axle – controlled via speed-dependent EBS electronics (no truck-side installation required, additionally with cable for operation in the tractor) Hjdpfjx Dp Atox Aa Soff ----Air Suspension: * Air suspension with lowering function via remote control ----Drawbar / Flange-Towing Eye: * 50 mm flange bolt towing eye – height adjustable by +77 mm and -33 mm – for 2 t vertical load ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary connector * LED lighting system 12 / 24V * 2 LED reversing lights activated via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connection cables for agricultural and forestry vehicles * Power supply for remote control 12+24 V via tail lights ----General Attachments: * BPW landing leg at the front * Mechanical extendable underrun protection for container lengths over 6,000 mm * Speedline diamond aluminium rims * Locking pin tow coupling (use only when underrun protection is retracted) * Closed plastic half-shell single fenders * Two-step access in front of the front bulkhead on the left * Shovel and broom holder in front of the front bulkhead * 2 stainless steel toolboxes – matte – approx. 650 x 350 x 320 mm, mounted on the right side * Closed side underrun protection usable as advertising space ----Hydraulics: * 2-circuit hydraulic connectors (powered from truck/tractor) designed for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted front right) with control via remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (serial no. 100746129, year 2023) * Base frame made of high-strength fine-grain steel * 20,000 kg lifting capacity * Hook height 1,570 mm * Hooklift control via remote control * Remote control with fast function when unloading, but not when pulling on * Emergency stop switches left and right * Container bed with four supports on each side and one roller each at the rear * Hydraulic rear inner locking * 2 additional hydraulic cylinders for assisting the lifting of the main arm * 2 x mechanical drop-down supports at the rear * Approved for 20 t gross vehicle weight (2 x 9 t axles) and 2 t vertical load * Note: If the remote control is outside the charging cradle, the service brake must be applied so the remote is enabled. The brake connections must remain connected to enable hydraulic/pneumatic valve actuation. * Monitoring system for underrun protection to ensure it is retracted during tipping ----Load Height: * Unloaded approx. 1,300 mm with lowered lift axle ----Paintwork: * Chassis, drawbar, access steps, underrun protection, and drop-down supports are hot-dip galvanized * Axles, air tanks, front landing leg painted in black * Palfinger hooklift painted black/yellow ----Information: * Errors and prior sale reserved * Vehicle is in very good / as new condition ----Delivery Time: * Vehicle is available immediately

Condition: used, maximum load weight: 14,300 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 07/2023, next inspection (TÜV): 11/2026, Year of construction: 2023, * HL - TA 20.0 ----Brakes: * Wabco EBS-E braking system * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake coupling ----Axle: * 2 x t SAF axles * 1st axle as lift axle (fully automatic) * Lift axle with +30 mm driving height via adjustment cylinder * Starting aid for shunting and forced lowering onto the first axle - controlled via speed-dependent EBS electronics - (no installation required on the truck side, additionally with cable for operation from the tractor) ----Air suspension: * Air suspension with lowering function via remote control ----Drawbar / Flange Towing Eye: * 50 mm flange-type adjustable towing eye - height adjustable by +77 mm and -33 mm - for 2 t support load ----Electrics / Lighting: * 15-pin power plug * 3-pin 12V auxiliary plug * LED lighting system 12 / 24V * 2 LED reversing lights operated via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connection cables for agricultural and forestry vehicles * Power supply for remote control 12+24 V via taillight ----General Attachments: * BPW landing gear at the front * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond aluminum rims * Pin-type tow coupling (use only when underrun protection is retracted) * Enclosed plastic half-shell single wheel mudguards * Two-step access ahead of the front wall on the left-hand side * Shovel and broom holder ahead of the front wall * 2 stainless steel toolboxes (matte finish), approx. 650 x 350 x 320 mm, right side * Enclosed side underrun protection usable as advertising surface ----Hydraulics: * 2-circuit hydraulic connectors (engine side from truck/tractor), rated for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted right front) operated via remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (Serial No. 100746129, year 2023) * Base frame made of high-strength fine-grain steel * 20,000 kg pulling force * Hook height 1,570 mm * Hooklift operation via remote control * Remote with fast feed for unloading, but not for lifting * Emergency stop switches on left and right sides * Container support with four side supports and one roller at the rear on each side * Hydraulic rear interior locking * 2 additional hydraulic cylinders to assist main boom lifting * 2 x mechanical drop-down supports at the rear * Approval for 20 t gross weight (2 x 9 t axles) and 2 t support load * Note: If the remote control is outside the charging cradle, the service brake must be applied to activate the remote. Brake connections must remain connected at all times to open the hydraulic/pneumatic control valves * Monitoring system for underrun protection ensuring it is retracted during tipping ----Loading Height: * Unladen: approx. 1,300 mm with lowered lift axle ----Coating: * Chassis, drawbar, access steps, underrun protection, and drop-down supports hot-dip galvanized * Axles, air tanks, front landing gear painted black * Palfinger hooklift painted black/yellow ----Information: * Errors and prior sale excepted * Vehicle is in very good / as-new condition Hfsdpfox Dp Agex Aa Sof ----Delivery Time: * Vehicle is immediately available

Condition: used, maximum load weight: 14,300 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 07/2023, next inspection (TÜV): 11/2026, Year of construction: 2023, * HL - TA 20.0 ----Braking System: * Wabco EBS-E braking system * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake connector ----Axle: * 2 x SAF axles (capacity per axle not specified) * 1st axle as lift axle (fully automatic) * Lift axle with driving height +30 mm via adjustment cylinder * Start-up aid for maneuvering and forced lowering on the first axle (controlled by speed-dependent EBS electronics; operated without installation on the truck side; includes additional cable for control from the tractor) ----Air Suspension: * Air suspension with lowering function via remote control ----Drawbar / Flange Towing Eye: * 50 mm flange-mounted towing eye - height-adjustable by +77 mm and -33 mm - for 2 t vertical load ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary socket * LED lighting system 12 / 24V * 2 LED reversing lights switched via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connection cables for agricultural and forestry vehicles * Power supply for radio 12+24V via tail light ----General Attachments: * BPW support windlass at front * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond-finish aluminum rims * Detachable pin-type tow coupling (use only when underrun protection is retracted) * Enclosed plastic half-shell individual mudguards * Two-step access in front of front bulkhead, left side * Shovel and broom holder in front of front bulkhead * 2 stainless steel toolboxes (matte), approx. 650 x 350 x 320 mm, right side * Closed lateral collision protection, usable as advertising surface ----Hydraulics: * Two-circuit hydraulic connections (engine side from truck/tractor), rated for 180 bar (for tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted on front right), operated via remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (Serial No. 100746129, year 2023) * Main frame made of high-strength fine-grained steel * 20,000 kg pulling force * Hook height 1,570 mm * Hooklift operated via remote control * Radio with quick function for tip-off, but not for winching * Emergency stop button on both left and right sides * Container rests with 4 lateral supports each side and 1 roller at the rear * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist the main arm lifting * 2 x mechanical tilt supports at rear * Approval for 20 t total weight (2 x 9 t axles) and 2 t vertical load * Note: If the remote control is outside the charging cradle, the service brake must be applied so that the radio function is released. The brake lines must remain permanently connected so the hydraulic/pneumatically controlled valves can be operated. * Monitoring system for underrun protection to ensure it is retracted when tipping ----Loading Height: * Unloaded approx. 1,300 mm with lift axle lowered ----Paintwork: * Chassis, drawbar, access steps, underrun protection, and tilt supports hot-dip galvanized * Axles, air tanks, front support windlass painted in black * Palfinger hooklift painted black/yellow ----Information: * Errors and prior sale reserved * Vehicle is in very good / like-new condition ----Container: Dimensions: Hfjdpfox Dp Amox Aa Ssf * Loading length: 5,500 mm * Loading width: 2,300 mm * Loading height: 1,000 mm Information: * Mounting brackets for hook systems as per...

Condition: used, axle configuration: 2 axles, Year of construction: 2014, Equipment: ABS, For inquiries regarding the vehicle, Mr. Seidel will assist you (by phone). MÜLLER MITTELTAL SF32BM/BT Concrete Mixer Semi-Trailer Superstructure: Liebherr HTM 1004, 10m³, BPW axles, drum brakes, spring-actuated parking brake, Wabco ABS, 1st axle liftable, air suspension, permitted gross weight: 32,000 kg, unladen weight: 6,510 kg, payload: 25,490 kg, tire tread depth: 1st axle 14-15mm, 2nd axle 10mm Upon request, we can provide you with a leasing or financing offer. Mr. Seidel (phone) will be happy to assist you. Hfjdpfx Aasyfu Sde Ssf For more information, please visit our website. ... Subject to errors, changes, and prior sale!!! = Further information = GVW: 32,000 kg External dimensions: 0x2500x4000 Please contact Tobias Ebert for further details.

Condition: used, empty load weight: 4,500 kg, maximum load weight: 13,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 08/2015, next inspection (TÜV): 07/2025, loading space length: 4,800 mm, loading space width: 2,400 mm, loading space height: 1,000 mm, color: blue, Year of construction: 2015, gearing type: other, driver cabin: other, Equipment: ABS, * German trailer * Condition, see photos * Müller-Mitteltal 3-way tipper, type KA-TA-R 18.0 tandem * Tipper dimensions: 4,800 x 2,400 x 1,000 mm * Roll tarp * Air suspension * Disc brakes * Platform * Jost support leg * Payload 13,500 kg If a new TÜV inspection is required, we are happy to provide you with an offer from our partner workshops. Our offer generally does NOT include a new TÜV inspection, new DGUV, new SP, or new UVV. You can find more trucks on our homepage at Hfjdpfxjwz H Nbo Aa Sef We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure the buyer does not have any misconceptions regarding condition or suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All information provided without guarantee. We are not liable for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and features of the goods/vehicles. Subject to alterations, prior sale, and errors.