Used Müller-Mitteltal Semitrailers With Work Platform for sale (268)

Condition: new, maximum load weight: 38,290 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 8,500 mm, loading space width: 2,520 mm, Year of construction: 2026, * TS 3 Profile 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 ton BPW Eco Plus axles * Rear axle is self-steering with electro-pneumatic steering lock ----Suspension: * Air suspension with lift/lower mechanism and RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control unit mounted on the trailer as an info tool with pressure sensors for total axle load display * 15-pin power connector * LED lighting system 12/24V * Removable LED beacon, mounted at rear left ----General attachments/accessories: * Side underrun protection * Landing gears at the front and mechanical swing-down supports at the rear of the chassis * Straight steel mudguards * Spare wheel holder underneath the chassis, on the right side ----Low Loader Deck: * Saddle platform with front corners chamfered at 45°, and a front-mounted toolbox made of galvanized steel (W = 2,480 x H = 500 x L = 665 mm) with hinged lid * 400 mm high, foldable and removable aluminum side boards (RAL 9010 pure white) mounted on the saddle platform * 150 mm high rear board, slotted in * Rear slope on the saddle platform leading to the lowbed, approx. 700 mm long * Saddle platform fitted with 50 mm wooden planks; lowbed platform with 60 mm wooden planks * Tread plate over the axles ----Widenings: * 8 mechanical fold-out extensions to 3 m total width (except on the rear slope; extension planks included with storage on the saddle platform) * Mechanically adjustable warning panel sets at front and rear ----Load Securing (Lashing Package): * On the saddle platform: 2 x 6.3 t lashing rings on each side, 3 x 5 t lashing rods on each side in the outer frame * On the lowbed platform (sides): 2 x 13.4 t lashing rings on each side plus 4 x 10 t lashing rings, swiveling and retractable, recessed into the outer frame * On the sides: 2 x 6.4 t lashing eyes each, plus 1 lashing ring at the rear in the excavator arm support * 2 x container locks directly after the gooseneck in the lowbed platform ----Excavator Arm Support: * Continuous excavator arm tray from the end of the last fixed axle, over the steering axle, up to the end cross member, with internal reinforcement profiles, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Loading Ramps: * Mechanically operated, one-piece, hot-dip galvanized hydraulic loading ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way valve block for future customer retrofitting of hydraulic ramp shifting * Outer plank on the ramp made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump capacities on truck from 40 l/min up to 120 l/min) ----Loading dimensions: * Saddle platform loading area: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Unladen load height approx. 910 mm (incl. 860 mm approach slope) Nedpfxjpk D I Aj Amgowg ----Fifth wheel height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractor units) ----Paint/Finish: * Chassis, loading ramps, rear support legs, and extension consoles hot-dip galvanized * Axles, landing gears, air tanks painted in a shade of black * Vehicle is hot-dip galvanized ----Info: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images may show equipment features not included with the offered vehicle ----A

Condition: new, maximum load weight: 37,560 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Year of construction: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-assist for shunting purposes activated on the first axle via EBS (without truck-side installation) * Last axle is a trailing steered axle with electro-pneumatic steering lock * Trailing axle lock for shunting purposes activated from the cab via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering function plus RtR valve ----Electrics / Lighting: * Smart-Board information panel mounted on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED warning beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator circuit * Tire pressure monitoring with display option in truck via EBS signal (without truck-side installation) ----General Attachments: * Side underrun protection Nwodpfxsykx Nke Amgeg * Landing gear at front plus rear swing-down supports on the chassis * Straight steel mudguards * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign kits at front and rear * Swivel arm as a carrier for connection cables from truck to trailer ----Low Loader Deck: * Second king pin position * Saddle platform with 45° chamfered front corners and front toolbox made of galvanized, powder-coated sheet steel (W = 2,480 x H = 500 x L = 665 mm) with hinged lid * 400 mm high aluminum drop sides (painted in RAL color of choice) on saddle platform, foldable and removable * Removable rear wall -150 mm high * Rear slope at saddle platform to low bed approx. 700 mm long with chequer plate covering, as well as lashing bar with holes for attaching aluminum loading ramps * Saddle platform with 50 mm clamped timber planks and low bed platform with 60 mm clamped timber planks * Tread plate above the axles * 9 mechanical folding extensions to 3 m total width (not over rear slope; extension planks available, with closed transverse storage compartment under loading area) * Prepared for 3 mounting slots under saddle platform for storing optional aluminum loading ramps or timber planks for wheel well covers * Prepared for container locks on gooseneck ----Load Securing (LaSi Package): Saddle platform: * Perforated outer frame with 45°-angled holes for lashing points (2 t lashing force per point, minimum 480 mm apart) * 3 x 13.4 t lashing rings recessed into the floor on each side (one on the saddle platform, one on the longitudinal beams after the step, one over the middle axle next to the beam) Low Loader Platform: * 3 x 13.4 t lashing rings on the outer frame on each side (beginning of platform step, start and end of ramp slope) * 2 x 10 t lashing rings per side (between front wheel recess and 1st axle, between 2nd and 3rd axle) * 3 x 5 t lashing rings per side, bolted to the outer frames of the wheel recesses (2 at the front, 1 at the rear wheel recess) ----Excavator Arm Trough: * Extended excavator arm trough from the end of the last rigid axle over the steering axle up to the end crossmember, continuous with internal reinforcement, approx. W = 770 mm x Depth (rear ...

Condition: new, maximum load weight: 29,850 kg, overall weight: 38,000 kg, axle configuration: 2 axles, loading space length: 8,000 mm, loading space width: 2,520 mm, Year of construction: 2026, TS 2 ML ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10 t axles * Last axle as a trailing steering axle with electro-pneumatic steering lock activated by PIN in reverse gear * Additional lock for the trailing axle, operable from the driver's cab for maneuvering purposes – without truck-side installation – assigned to PIN 10; the lock must be disengaged before driving on public roads ----Suspension: * Air suspension with lift and lower function and RtR (Ride to Reduce) function ----Electrics / Lighting: * Tire pressure monitoring system with display capability in the truck's display via EBS signal – without truck-side installation * LED tail lights 12 / 24 V * Flashing side marker lights * LED reverse lights activated by reverse gear * SmartBoard installed as info tool with pressure sensors solely for total axle load display * 7-pin socket at the rear for illumination of overlength loads * LED beacon (removable) at the rear ----General Attachments: * Aluminum air tanks * Manual crank landing gears * Galvanized steel mudguards * Swivel arm as carrier for connection lines in front of the front bulkhead ----Warning Package: * Mechanically adjustable warning sign package ----Lowbed Platform: Nsdpoykx I Hefx Amgjwg * 50 mm thick flooring made from larch / Douglas fir instead of spruce / fir * Rear slope – 700 mm long – on the semi-trailer deck to the low bed with checker plate covering and at the end a perforated strip for attaching aluminum drive-on ramps * Tread plate cover over the wheels * SP combo package: toolbox with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum color, mounted on the semi-trailer platform approx. 2,480 x 500 mm * Hinged lid on top and side doors in the angled corners * Fold-down aluminum side boards, 500 mm high on the trailer platform, incl. foldable and removable rear stanchions * Plug-in aluminum rear wall, 150 mm high * 2nd kingpin position * Preparation for container locks * Preparation for 3 receiving pockets in the transition slope from lowbed to gooseneck * Preparation for retrofitting folding outriggers to achieve 3-meter width, including welded-in mounting brackets in the outer frame ----Load Securing: Semi-trailer platform: * 50 mm holes in the front corners and front for 1.2 t lashing force per hole * 2 x 16.5 t lashing rings recessed in the floor at the side near the approach slope * Perforated, 45°-bent outer frame with hole pattern for lashing equipment (2 t lashing points every 480 mm) * Each side with 2 x 6.3 t retractable lashing rings recessed in the outer frame Low-bed platform: * 2 x 16.5 t lashing rings recessed centrally just in front of the approach slope to the gooseneck * Each side with 3 pairs of 13.5 t and 5 pairs of 10 t retractable lashing rings recessed into the outer frame * Each side with 4 stake pockets recessed into the outer frame * Profifix lashing rail in the center longitudinal axis (lashing capacity 3 t per lashing circuit) ----Excavator Arm Rest: * From end of last rigid axle to end cross member B = 770 mm, D = 270 mm (each side with 2 x 6.4 t lashing rings welded in place in the excavator arm rest) ----Ramp: * Hydraulic one-piece "ALLTEC" aluminum drive-on ramps, approx. 3,200 x 750 mm * Load capacity 13 t per ramp (26 t/pair) * Hydraulic ramp shifting on sliding tube of the ramp shaft ----Hydraulics: * Hydraulic flow divider in the trail

Condition: used, empty load weight: 8,850 kg, maximum load weight: 31,150 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 08/2019, suspension: steel, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Total loading platform length approx. 9,500 mm, lowbed loading platform length approx. 7,360 mm, loading height approx. 910 mm, 14 pairs of lashing eyes. Vehicle is offered on behalf of the customer. -- Subject to errors, misprints, and changes. Sample images -- More data at: !, More Details: ! Nwjdpfxjy Ulfne Amgjg

Condition: used, empty load weight: 4,550 kg, maximum load weight: 13,450 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2016, loading space length: 6,540 mm, loading space width: 2,480 mm, suspension: air, tire size: 235 / 75 R 17,5, color: beige, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, 10 pairs of lashing eyes, loading height approx. 900 mm, , customer vehicle, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Njdpsy Ulfhsfx Amgjwg

Condition: used, empty load weight: 4,190 kg, maximum load weight: 13,810 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2016, suspension: air, tire size: 385/55R22,5 160J, color: other, gearing type: other, front tire size: 385/55R22,5 160J, rear tire size: 385/55R22,5 160J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing eyes, 800 mm aluminum side walls, surcharge for ramps €800, -- misprints, errors and changes excepted, sample images --, More data at: !, More Details: ! Nodpfx Amjy Uanwogowg

Condition: used, empty load weight: 6,200 kg, maximum load weight: 23,800 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 11/2006, suspension: steel, tire size: 235/75R17,5 141/140J, color: other, gearing type: other, front tire size: 235/75R17,5 141/140J, rear tire size: 235/75R17,5 141/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing eyes, , --  Misprints, errors and changes reserved, Sample images --, More details at: !, More details: ! Nwedpfx Amjy T E Dnegjg

Condition: used, empty load weight: 5,750 kg, maximum load weight: 24,250 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 01/1993, suspension: steel, tire size: 235/75R17,5 141/140J, color: other, gearing type: other, front tire size: 235/75R17,5 141/140J, rear tire size: 235/75R17,5 141/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, , -- Misprints, errors and omissions excepted, sample pictures --, More details under: !, More Details: ! Nwodpjy T E Dzsfx Amgeg

Condition: used, empty load weight: 7,340 kg, maximum load weight: 22,660 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 05/2012, loading space length: 9,200 mm, suspension: steel, tire size: 235/75 R 17,5, color: other, gearing type: other, front tire size: 235/75 R 17,5, rear tire size: 235/75 R 17,5, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length approx. 9,200 mm, loading height approx. 900 mm, 16 x lashing eyes, , Vehicle is sold on order , , , -- Subject to misprints, errors and alterations, sample pictures --, More data under: !, More Details: ! Nwjdpfx Aoy Tln Tomgsg

Condition: used, empty load weight: 6,500 kg, maximum load weight: 23,500 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 06/2010, suspension: steel, tire size: 235 / 75 R 17,5, color: other, gearing type: other, front tire size: 235 / 75 R 17,5, rear tire size: 235 / 75 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, Vehicle is sold on behalf of a customer, partly wooden boards def., 17 pairs of lashing eyes, , loading height approx. 900 mm, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Nsdpfx Asy Tll Sjmgjwg

Condition: used, maximum load weight: 18,200 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 11/2002, next inspection (TÜV): 10/2026, loading space length: 8,400 mm, loading space width: 2,520 mm, loading space height: 900 mm, total width: 2,550 mm, Total weight: 24,000 kg / 30,000 kg Unladen weight: 5,800 kg Payload: 18,200 kg / 24,200 kg Loading length: Total approx. 8,400 mm / approx. 6,200 mm low-bed, including rear extension Width: 2,550 mm / Loading width approx. 2,520 mm Nwodpfx Amjy Uqprjgjg Loading height: 900 mm Further information: - Spring ramps - Twin tires - LED reversing lights - Large lashing kit - Trough-shaped bed

Condition: new, suspension: other, color: other, gearing type: other, driver cabin: other, emission class: none, Leveling bracket for low-loader semi-trailer including container closures, price per leveling bracket, , --  Subject to printing errors, mistakes and changes, sample images --, More information at: !, More details: ! Nwjdpfx Aoy Sn Dhsmgsg

Condition: new, maximum load weight: 8,900 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TA-ER 14.4 Platform Trailer: ----Brakes: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5-ton BPW axles ----Suspension: * Air suspension with lift and lower system ----Drawbar / Flange Drawbar: * Drawbar with 300 mm height adjustment * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in a B-dimension of approx. 8,080 mm) * 40 mm flange drawbar ---- Electrical System / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear (switched via reverse gear) * 1 LED rotating beacon (removable incl. bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Components: * Mechanically adjustable 3 m warning sign package at the front and rear * Front support winch * Outboard folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each on the left and right sides * Side impact protection * Underrun protection * Plastic quarter fenders ----Loading Platform: * 400 mm high bolted front wall * 50 mm hardwood floor * 2 pairs of container locking devices (extendable to 3 m container outer width) and lockable, locking dimension when retracted according to ISO - DIN 15190 = 2,259 mm. Container locking devices extended = 2,819 mm (this dimension is not according to DIN) with an absolute outer width of 3,000 mm ----Load Securing: * Perforated outer frame approx. 45 degrees bent with 2-ton lashing force every 480 mm * Installation of 3-ton lashing eyes possible every 600 mm - 5 x 3-ton UVV lashing eyes installed on each side - * At the corners at the front and rear, each 1 x 6.3-ton lashing point (at the front directly behind the container locking devices in the wooden floor and at the rear in the end beam) * Various holes in the front and end beam for 1.2-ton lashing options Nwedpfx Asy U A Eljmgsg ----Ramps: * 1 pair of aluminum sliding ramps approx. 3,310 x 410 mm (load capacity 8 tons / pair) suitable for rubber-tired and tracked vehicles * Storage compartment recessed in the chassis below the loading platform at the rear ----Painting: * Chassis, drawbar, front wall, underrun protection, and rear supports hot-dip galvanized * Axles, air tank, front support winch, and flange drawbar painted in a black tone ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Sample images ----Delivery Time: * Available from approx. week 38/2026

Condition: new, maximum load weight: 30,080 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Year of construction: 2026, * T4 RM 40.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required * Drum brakes * 4 x 11 t Gigant axles * Air suspension with manual lowering at the rear * Warning sign packages front and rear * SmartBord infotool installed with pressure sensors for displaying total axle load per axle group * Reflective contour tape on the sides and rear * Removable LED rotating beacon at the rear * 15-pin power connector * LED tail lights * Straight drawbar with 50 mm towing eye and stepless height adjustment * Front closed single plastic mudguards * Rear straight steel mud flaps each with splash guards (spray suppression) * Side underrun protection * Front extension in front of the bogie platform approx. 520 mm with 45° corners and 3 storage compartments including lockable hinged covers (covers open to the rear) * Chassis made of high strength fine-grain steel * Floor over bogie platform made of 50 mm softwood and 60 mm on the lowbed platform * Outer planks of the loading ramps made of 50 mm hardwood * Lashing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the bogie platform, side front and rear each 1 pair of 13.4 t lashing rings on the outer frame, and side each 1 pair of 10 t lashing rings, swiveling and lowerable, loadable in all directions and recessed into the outer frame, bolted 5 t lashing rings to the outer frames of the wheel wells (2 at the front wheel well and 1 at the rear), 2 pairs of 6.4 t lashing rings at the side in the excavator arm rest * 11 pairs of folding outriggers for 3 m total width (except on rear slope) * Storage compartment (L = 2,470 x W = 570 x H = 250 mm) for the widening planks made of steel sheet, mounted transversely to the loading platform in front of the 1st rear axle * Excavator arm rest above the rear axle to the end of the drive-up slope, approx. 2,300 x 740 x 190 mm * Each side with 2 wheel wells approx. 640 mm wide – front 340 mm deep, rear 220 mm deep – with sliding covers (storage for the covers on the front of the bogie platform) for the transport of wheel loaders with a wheelbase of 3,100 – 3,640 mm * Mechanical drop-down supports at the rear * Hydraulic folding ramps with hydraulically extendable tip, approx. 4,650 x 720 mm * Hydraulic lateral ramp shift * Loading area above the slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm, loaded height approx. 890 mm +/- 20 mm (incl. 860 mm drive-up slope) Nwsdpjxmpykofx Amgjg * Chassis, bogie, folding outriggers, rear drop supports and loading ramps hot-dip galvanized * Axles, air tanks and drawbar painted black * Tires: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Subject to errors and interim sale * Immediately available ex Egestorf

Condition: new, maximum load weight: 8,900 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TA-ER 14.4 Platform Trailer: ----Brakes: * EBS (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 ton BPW axles ----Suspension: * Air suspension with lift and lower system ----Drawbar / Flange Coupling: * Drawbar adjustable by 300 mm in height * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in a B-dimension of approx. 8,080 mm) * 40 mm flange coupling ---- Electrical System / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights, additional at the rear (switched via reverse gear) * 1 LED rotating beacon (removable incl. bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Components: * Mechanically adjustable 3 m warning sign package at the front and rear * Support winch at the front Nwodpey U A Efefx Amgjg * Outboard folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm each, on the left and right sides * Side impact protection * Underrun protection * Plastic quarter fenders ----Loading Platform: * 400 mm high, bolted end wall * 50 mm hardwood flooring * 2 pairs of container locking mechanisms (extendable to 3 m container outer width) and lockable; locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locking mechanisms extended = 2,819 mm (this dimension is not according to DIN) with an absolute outer width of 3,000 mm ----Load Securing: * Perforated outer frame, bent at approx. 45 degrees, with 2 tons lashing force every 480 mm * Installation of 3 tons lashing eyes possible every 600 mm - 5 x 3 tons UVV lashing eyes installed on each side - * In the front and rear corners, 1 x 6.3 tons lashing point each (at the front, directly behind the container locking mechanisms in the wooden floor, and at the rear in the end beam) * Various holes in the end and end beam for 1.2 tons lashing capability ----Ramps: * 1 pair of aluminum insert ramps approx. 3,310 x 410 mm (load capacity 8 tons / pair) suitable for rubber-tired and tracked vehicles * Storage compartment recessed from the rear below the loading platform in the chassis ----Painting: * ---Chassis, drawbar, end wall, underrun protection, and rear supports hot-dip galvanized--- * Axles, air tank, support winch at the front, and flange coupling painted in a black tone ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Sample images ----Delivery Time: * Available from approx. week 38/2026

Condition: new, maximum load weight: 30,080 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Year of construction: 2026, * T4 RM 40.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Tire pressure monitoring with display capability in the truck via EBS signal (no truck-side installation required) Nwjdpfxsxmpyds Amgog * Drum brakes * 4 x 11 ton Gigant axles * Air suspension with manual lowering at the rear * Warning sign packages front & rear * SmartBord infotool mounted with pressure sensors for total axle load display per axle group * Side and rear reflective contour tape * Removable LED beacon at the rear * 15-pin power connector * LED tail lights * Straight drawbar with 50 mm towing eye and stepless height adjustment * Closed single plastic mudguards at the front * Straight rear steel mud flaps each with spray suppression * Side underrun protection * Front extension in front of turntable platform approx. 520 mm with 45° corners and 3 storage compartments incl. lockable folding lids (open to the rear) * Chassis made of high-strength fine-grain steel * Floor above turntable platform made of 50 mm softwood and 60 mm softwood on low-bed platform * Outer planks of the ramps made of 50 mm hardwood * Load securing package consisting of: 2 lashing eyes 6.4 t front left and right on the main frame of the turntable platform; one pair each (front & rear) of 13.4 t lashing rings on the outer frame; one pair each side of 10 t swivel and lowerable lashing rings, loadable in all directions and integrated in the outer frame; bolted 5 t lashing rings on the outer frames of the wheel wells (2 at the front wheel well, 1 at the rear); 2 pairs of 6.4 t lashing rings at the sides of the excavator boom cradle * 11 pairs of folding outriggers for a total width of 3 meters (not on rear slope) * Storage compartment (L = 2,470 x W = 570 x H = 250 mm) for widening planks made of sheet steel, mounted transverse to the load area in front of the 1st rear axle * Excavator boom cradle above the rear axle to end of incline approx. 2,300 x 740 x 190 mm * 2 wheel wells per side, approx. 640 mm wide – front 340 mm deep, rear 220 mm deep – with sliding cover (storage for covers at the front on the turntable platform) for transporting wheel loaders with 3,100 - 3,640 mm wheelbase * Mechanical drop-down supports at the rear * Hydraulic folding ramps with hydraulically deployable tip section approx. 4,650 x 720 mm * Hydraulic lateral ramp shift * Loading area above fifth wheel: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm, loaded height approx. 890 mm +/- 20 mm (incl. 860 mm approach slope) * Chassis, turntable, folding outriggers, rear supports, and ramps hot-dip galvanized * Axles, air tanks, and drawbar painted black * Tires: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Subject to change and prior sale * Immediately available ex Egestorf

Condition: new, maximum load weight: 10,950 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TA-ER 14.4 Platform Trailer: ----Brakes: * EBS (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 2 x 7-ton BPW axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange Coupling: * Drawbar adjustable in height by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in a wheelbase of approx. 8,080 mm) * 40 mm flange coupling ---- Electrical System / Lighting: * 15-pole power connector * LED lighting system 12 / 24 V * 2 LED reversing lights additionally at the rear (switched via reverse gear) * 1 LED rotating beacon (removable incl. bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Components: * Mechanically adjustable 3 m warning sign package at the front and rear * Support winch at the front * Outboard folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm on each side, left & right * Side impact protection * Underrun protection * Plastic quarter fenders ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood flooring, * 2 pairs of container locking devices (extendable to 3 m container outer width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locking devices extended = 2,819 mm (this dimension is not according to DIN) with an absolute outer width of 3,000 mm ----Load Securing: * Perforated outer frame approx. 45 degrees angled with 2-ton lashing force every 480 mm * Installation of 3-ton lashing eyes every 600 mm possible - 5 x 3-ton UVV lashing eyes installed on each side - * In the corners at the front and rear, 1 x 6.3-ton lashing point each (at the front directly behind the container locking devices in the wooden floor and at the rear in the end beam) * Various holes in the front and end beam for 1.2-ton lashing options Nodpfxev D Tbdo Amgswg ----Ramps: * 1 pair of aluminum sliding ramps approx. 3,570 x 410 mm (load capacity 10 tons / pair) suitable for rubber-tired and tracked vehicles * Storage compartment recessed at the rear under the loading area in the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection and rear supports hot-dip galvanized--- * Axles, air reservoir, support winch at the front and flange coupling painted in a black tone ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Available from approx. week 39/2026

Condition: new, maximum load weight: 12,200 kg, overall weight: 14,400 kg, axle configuration: 2 axles, Year of construction: 2026, * TM-TA 14.4: ----Brakes: * Wabco EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 ton Gigant axles ----Suspension: * Parabolic springs with equalizer ----Drawbar / Flange coupling: * Height-adjustable +/- 150 mm hot-dip galvanized drawbar * 40 mm flange coupling ----Electrical system / Lighting: * 15-pole electrical connector * LED tail lights * TPMS tire pressure monitoring system ----General components: Nedpfepk Dyxex Amgjwg * Jost front support legs * 2 x external rear outrigger supports * Closed plastic individual mudguards * Folding A-frame warning sign at the rear * Plastic impact protection buffer on the underrun protection * Hot-dip galvanized underrun protection with integrated chain storage box, W=370 mm x D=420 mm x H=480 mm, front left & right ----Load securing: * 2 x 5.3 ton UVV lashing rings on each side for attaching lashing elements * Includes 2 ratchet tensioning straps permanently mounted on the outer frame with chain box * Equalizing chain on both sides with eye and quick shortening device in Y special design, 6.3 tons ----Bin stops: * 2 repositionable bin stops for lateral centering of the bin * Front bin stops with pivoting stop, can be locked in 4 positions ----Paint finish: * Hot-dip galvanized chassis * Axles, springs, air tanks, and support legs painted in a black shade ----Information: * Load capacity with Lasi certificate * Errors and prior sale excepted * New vehicle with manufacturer's warranty ----Delivery time: * Available from approximately week 38/2026

Condition: new, maximum load weight: 10,950 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TA-ER 14.4 Platform: ----Brakes: * EBS (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 2 x 7-ton BPW axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange coupling: * Drawbar, height-adjustable by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in a B-dimension of approx. 8,080 mm) * 40 mm flange coupling ---- Electrical system / Lighting: * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights, additional at the rear (switched via reverse gear) * 1 LED rotating beacon (removable incl. bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General components: * Mechanically adjustable 3 m warning sign package at the front and rear * Front support winch * Outboard folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm, each on the left and right side * Lateral impact protection * Underrun protection * Plastic quarter fenders ----Loading area: * 400 mm high bolted front bulkhead * 50 mm hardwood flooring * 2 pairs of container locking devices (extendable to 3 m container outer width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locking devices extended = 2,819 mm (this dimension is not according to DIN) with an absolute outer width of 3,000 mm ----Load securing: * Perforated outer frame, bent at approx. 45 degrees with 2-ton lashing force every 480 mm * Installation of 3-ton lashing eyes possible every 600 mm - 5 x 3-ton UVV lashing eyes installed on each side - * 1 x 6.3-ton lashing point in each corner, front and rear (at the front directly behind the container locking devices in the wooden floor and at the rear in the end beam) * Various holes in the front and end beams for 1.2-ton lashing options ----Ramps: * 1 pair of aluminum sliding ramps approx. 3,570 x 410 mm (load capacity 10 tons / pair) suitable for rubber-tired and tracked vehicles * Storage compartment recessed in the chassis below the loading area from the rear ----Painting: * ---Chassis, drawbar, front bulkhead, underrun protection and rear supports hot-dip galvanized--- * Axles, air tank, front support winch and flange coupling painted in a black tone ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale reserved ----Delivery time: * Available from week 39/2026 Nsdpfx Aov D Tbkjmgjwg

Condition: new, maximum load weight: 12,200 kg, overall weight: 14,400 kg, axle configuration: 2 axles, Year of construction: 2026, * TM-TA 14.4: ----Brakes: * Wabco EBS braking system * Emergency release device for spring accumulators * Drum brakes Nwodpfx Amel Thyqogjg ----Axles: * 2 x 7-ton Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Drawbar / Flange coupling: * Height-adjustable +/- 150 mm hot-dip galvanized drawbar * 40 mm flange coupling ----Electrical system / Lighting: * 15-pole power connector * LED tail lights * TPMS tire pressure monitoring system ----General components: * Jost landing gear at the front * 2 x external support legs at the rear * Closed plastic mudguards * Folding warning sign at the rear * Plastic ram protection buffer on the underrun protection * Hot-dip galvanized underrun protection with integrated chain storage box, W=370 mm x D=420 mm x H=480 mm, front left & right ----Load securing: * 2 x 5.3-ton UVV lashing points on each side for attaching tensioning elements ----Bin stops: * 2 repositionable bin stops for centering the bin laterally * Bin stops at the front with a pivoting stop that can be locked in 4 positions ----Painting: * Hot-dip galvanized chassis * Axles, springs, air tanks, and landing gear painted in a black shade ----Information: * Subject to errors and prior sale * New vehicle with manufacturer's warranty ----Delivery time: * Available from approximately week 38/2026

Condition: new, maximum load weight: 23,500 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,380 mm, loading space width: 2,520 mm, Year of construction: 2026, * PT 30 Profile: ----Brakes: * EBS (electronic brake system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11-ton Gigant axles ----Suspension: * Air suspension with lifting and lowering system and rapid lowering valve ----Drawbar: * 1,200 mm long drawbar with 40 mm drawbar eye and height adjustment via spring and locking mechanism ----Electrical System / Lighting: * Smart board mounted on the trailer as an information tool (for displaying axle loads - separately for front and rear) * Tire pressure monitoring system with display option in the truck via EBS signal without truck-side installation * 15-pin power connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear ----General Components: * Side impact protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front plastic quarter fenders with splash protection * Rear straight, galvanized steel side skirts with splash protection * Toolbox made of galvanized steel sheet, approx. 650 x 300 x 600 mm, black powder-coated on the right side * Box in the turntable for accessories with a hinged lid, 2 continuous locking mechanisms, permanently installed (directly behind the turntable platform) * 2 galvanized steps on the turntable, left and right ----Low-loader Deck: * Robot-welded anti-slip coating on the steel plate of the turntable platform (protruding weld beads) ----Load Securing (Load Securing Package consisting of): * 2 lashing eyes (13.4 tons) at the front, left and right, on the front wall support * 1 pair of UVV lashing rings (13.4 tons) at the front and rear, as well as 3 pairs of UVV lashing rings (10 tons) each on the side, swivel and lowerable, loadable in all directions and recessed in the outer frame * 3 rung pockets on each side with simultaneous 2-ton lashing capability * Profifix lashing rail in the longitudinal axis in the center, in the level area for lashing up to LC 3000 daN ----Widening: * 6 pairs of mechanically folding outriggers for a total width of 3 m (however, not in the rear slope) * Widening boards placed in the center of the loading area ----Ramps: Nwsdpoxptn Refx Amgsg * Hydraulic, one-piece ramps, approx. 3,000 x 720 mm * Mechanically adjustable on the side * 4-way control block for later retrofitting of hydraulic ramp shifting ----Excavator Arm Rest: * Excavator arm rest extending across the rear axle to the end support (total length approx. 2,100 mm) * 2 pairs of lashing eyes LC 6400 daN in the excavator arm rest, on the side in the longitudinal frame ----Loading Height: * Loaded approx. 910 mm +/- 20 mm air suspension ----Painting: * Chassis, turntable, folding outriggers, support legs and ramps hot-dip galvanized * Axles, slewing ring, air tank, drawbar fork painted in a black tone ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale are subject to change * Sample images ----Delivery Time: * Available from approximately week 22/2026

Condition: new, maximum load weight: 23,940 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profi 30.0 ----Brakes: * EBS braking system * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11-ton Gigant axles ----Suspension: * Parabolic springs with mechanical axle compensation at the rear ----Drawbar: * Drawbar with 50 mm drawbar eye and height adjustment via coil spring and tension lock ----Lighting / Electrical System: * TPMS (Tire Pressure Monitoring System) * Multi-voltage system * LED tail lights 12 / 24 V * Rotating beacon (removable) at the rear * 15-pin power connector ----General Components: * Side impact protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front fender made of molded plastic and rear fender made of straight, galvanized steel sheet, each with splash protection * Toolbox made of galvanized steel sheet - black powder-coated - approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for the toolbox in the turntable platform * 4 lashing pockets on each side (but no lashing bars included) with simultaneous lashing capability ----Load Securing (Load Securing Package consisting of): * 2 lashing eyes (6.4 tons) at the front left and right on the main frame of the turntable platform * 6 pairs of UVV lashing rings, swiveling and lowerable, loadable in all directions and recessed in the outer frame * 13.4 tons in the corners, otherwise 10 tons ----Widening: * 6 pairs of mechanical folding outriggers for a total width of 3 meters (but not in the rear slope) * Widening boards placed in the middle of the loading area ----Ramps: * Hot-dip galvanized, one-piece hydraulic ramps (approx. 3,000 x 720 mm), mechanically adjustable on the side * 4-way control unit for retrofitting the hydraulic side ramp adjustment ----Loading Area: * Above the slewing ring: approx. 1,960 x 2,520 mm & unloaded approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm & unloaded approx. 910 mm (incl. 860 mm approach ramp) Nodol Th Nnopfx Amgewg ----Tires: * 235/75 R 17.5 twin tires ----Unladen Weight: * Approx. 5,980 kg unladen weight ----Paintwork: * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in a black tone ----Information: * Technically possible gross vehicle weight of 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery Time: * Immediately available from Egestorf

Condition: new, maximum load weight: 16,000 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 700 mm, Year of construction: 2024, * KA-TA-RT 21.0 ML ----Brakes: * Without ABS/EBS, approved for 40 km/h * Spring brake parking brake * Drum brakes ----Axles: * Gigant axles ----Suspension: * Tandem equalizer with 100 mm wide parabolic springs ----Drawbar eye / Drawbar: * Fixed welded drawbar with low-maintenance collar for K80 ball coupling (adjustable by +77 mm / 33 mm via headplate) with high-set gantry for connection lines Nwodpfxsr Dpzuo Amgeg ----Electrical system / Lighting: * 12 V, 7 + 4-pole power cable * LED lighting system 12 / 24 V with protective grille * 2 LED work lights at the rear, switchable from the towing vehicle without installation on the towing vehicle side ----General components: * Front support jack * Mech. drop-down supports at the rear * Side marker lights with turn signal control * Plastic quarter fenders * Plastic toolbox approx. 750 x 350 x 300 mm on the right side * Hot-dip galvanized, two-step access ladder in front of the headboard (on the left side) ----Chassis: * Chassis made of fine-grained steel ----Tipping body: * Steel pallet-type 3-way tipping body with M-Strong sideboards (front wall fixed, continuous side walls - without center rails - pivoting via manual central locking and mechanically foldable with sideboard spring lifter) * Hydraulic tailgate 500 mm high as hydraulic tipping gate with a 115° opening angle * 4 mm Hardox 450 steel floor ----Load securing: * 1 x 7 t. recessed and foldable lashing eye at each corner * 4 x 3 t. recessed and foldable lashing eyes on each side ----Ramps: * 1 pair of aluminum loading ramps (10 t / pair with axle distance over 2,500 mm) 3,570 x 410 x 120 mm, suitable for rubber-tired and tracked vehicles * 2 receptacles for aluminum loading ramps recessed at the rear in the chassis, load securing according to EN 12642 XL ----Coupling height: * loaded approx. 530 mm & unloaded approx. 590 mm ----Painting: * Body painted in RAL 9010 pure white * Chassis, drawbar, drop-down supports at the rear, underrun protection hot-dip galvanized * Axles, air tank, front support jack * K80 coupling painted in a black tone ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale subject to change ----Delivery time: * Available immediately from Egestorf

Condition: new, maximum load weight: 16,000 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 700 mm, Year of construction: 2024, * KA-TA-RT 21.0 ML ----Brakes: * Without ABS/EBS, approved for 40 km/h Nedpor Dpz Hsfx Amgowg * Spring brake parking brake * Drum brakes ----Axles: * Gigant axles ----Suspension: * Tandem equalizer with 100 mm wide parabolic springs ----Drawbar/Drawtube: * Fixed welded drawtube with low-maintenance cap for K80 ball coupling (adjustable by +77 mm / 33 mm via the head plate) with a high-mounted gantry for the connection lines ----Electrical System/Lighting: * 12 V, 7 + 4-pole power cable * LED lighting system 12/24 V with protective grille * 2 LED work lights at the rear, switchable from the towing vehicle without installation on the towing vehicle side ----General Components: * Front support jack * Mechanical drop-down supports at the rear * Side marker lights with turn signal control * Plastic quarter fenders * Plastic toolbox, approx. 750 x 350 x 300 mm, on the right side * Hot-dip galvanized, two-step access ladder in front of the front panel (FR, left) ----Chassis: * Chassis made of fine-grain steel ----Tipping Body: * Steel pallet-sided 3-way tipping body with M-Strong side walls (front wall fixed, continuous side walls – without center rails – pivoting via manual central locking as well as mechanically foldable with side wall spring lifters) * Hydraulic tailgate, 500 mm high, as a hydraulic dump gate with a 115° opening angle * 4 mm Hardox 450 steel floor ----Load Securing: * 1 x 7 t lashing points each in the corners - recessed and foldable * 4 x 3 t lashing points each on the sides - recessed and foldable ----Ramps: * 1 pair of aluminum loading ramps (10 t/pair with axle spacing over 2,500 mm), 3,570 x 410 x 120 mm, suitable for vehicles with rubber tires and tracked vehicles * 2 storage compartments for aluminum loading ramps, recessed in the rear of the chassis, load securing according to EN 12642 XL ----Coupling Height: * Loaded approx. 530 mm & unloaded approx. 590 mm ----Painting: * Body paint in RAL 9010 pure white * Chassis, drawtube, rear drop-down supports, underrun protection, hot-dip galvanized * Axles, air tank, front support jack * K80 coupling painted in a black tone ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale reserved ----Delivery Time: * Immediately available from Egestorf

Condition: new, maximum load weight: 23,940 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2025, * T3 Profi 30.0 ----Brakes: * EBS braking system * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11-ton Gigant axles ----Suspension: * Parabolic springs with mechanical axle compensation at the rear ----Drawbar: * Drawbar with 50 mm drawbar eye and height adjustment via coil spring & tension lock ----Lighting / Electrical System: * TPMS tire pressure monitoring system * Multi-voltage system * LED tail lights 12 / 24 V * Rotating beacon (removable) at the rear * 15-pin power connector ----General Components: * Side impact protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front mudguards made of plastic and rear mudguards made of straight, galvanized steel sheet, each with splash protection * Tool box made of galvanized steel sheet - black powder-coated - approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for the tool box in the turntable platform * 4 lashing points on each side (but no lashing bars included) with simultaneous lashing capability ----Load Securing (La-Si package consisting of): * 2 lashing points (6.4 tons) at the front left & right on the main frame of the turntable platform * 6 pairs of UVV lashing rings, swivel and lowerable, loadable in all directions and recessed in the outer frame * 13.4 tons in the corners, otherwise 10 tons ----Widening: Nwodpfxel Th I As Amgjg * 6 pairs of mechanical folding outriggers for a total width of 3 meters (but not in the rear slope), * Widening boards placed in the middle of the loading area ----Ramps: * Hot-dip galvanized, one-piece hydraulic ramps (approx. 3,000 x 720 mm), mechanically adjustable on the side * 4-way control block for retrofitting of the hydraulic side ramp adjustment ----Loading Area: * above the turntable: approx. 1,960 x 2,520 mm & unladen approx. 1,070 mm * rear loading area: approx. 6,500 x 2,520 mm & unladen approx. 910 mm (incl. 860 mm approach angle) ----Tires: * 235/75 R 17.5 twin tires ----Unladen Weight: * approx. 5,980 kg unladen weight ----Painting: * Chassis, turntable, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in a black shade ----Information: * Technically possible gross vehicle weight of 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available from Egestorf