Trailer with working platform

MÜLLER-MITTELTAL 24 to. Kombi Cont. fl.-Liftachse NEU

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Center axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye & height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin electrical connector * TPMS (Tire Pressure Monitoring System) ----General Equipment: * Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear bump stops * Mechanical drop down stands at rear ----Container / Low Loader Deck: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) to guide the roll-off containers * Steel sheet floor with roller recesses in the bogie area * For roll-off container transport, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking as well as mechanical plug-in stops at the front in the running rails * Load certificate according to DIN 30722-1 * Transportation of up to 2 skip containers with a maximum of 10 m³ volume possible * Includes 8 repositionable skip stops for lateral centering of skips, front 4 skip stops plug-in with pendulum-mounted stop ----Load securing: * 3 pairs of 10 t UVV lashing rings at the sides for attaching tensioning elements for positive and non-positive securing of the skips * 4 side lashing bars in cloverleaf design and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld beads as anti-slip surface on the approach ramp running rail * 1 pair of aluminium approach ramps (16 t / pair), 2,800 x 400 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment from the rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: Bcjdpfetplv Tjx Abzow * Reflective contour tape on sides and rear * Axles, turntable, drawbar and air tank painted in black tone * Hot-dip galvanized main frame ----Info: * Technically permissible total weight of 27,000 kg possible * New vehicle, unregistered, with manufacturer warranty * Subject to prior sale and errors excepted ----Delivery time: * Available from week 20/2026

Condition: new, maximum load weight: 10,420 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 2,550 mm, loading space height: 1,030 mm, loading space volume: 20 m³, total width: 2,550 mm, total height: 1,030 mm, Equipment: ABS, WhatsApp: We have the largest selection of HÜFFERMANN roll-off/demountable container trailers in southern Germany in stock for you!! ALL TRAILERS ARE ARC GALVANIZED!!!!! 2-AXLE CENTRAL AXLE MINI CARRIER TRAILER - "HÜFFERMANN" MULTIFIX For transporting skip bins in accordance with DIN 30720 Weights Total weight (permissible) 13 t Total weight (technical) 13 t with a support load of 1 t Dimensions Frame length approx. 4,000 mm, for a skip bin up to 20 m3 Total width max. 2,550 mm Container contact height (in driving position) approx. 1,030 mm Frame Type HTM-3 1340 with Safetyfix brackets, single tires Welded steel frame construction made of high-strength steel Chassis for skip bins for rear loading Combined load securing, side centering fix, a few plug-in wedges with pendulum shoes on the front Attachment eyes on the side of the frame for Lashing chains Prepared for chainless load securing "Multifix" Closed sheet steel floor, between the longitudinal beams Frame attachments 1 pair of lashing points for a stacked skip bin 4 pairs of screwable 6.3t lashing brackets on the outer frame Skip bin securing Multifix for a skip bin Chainless load securing Multifix for a skip bin on the mini-carrier without press transport equipment Towing device Welded towing tube with screwed 40 mm towing eye, screwable/height adjustable +/- 200 mm Support device At the front 1 mechanical steel support winch with hand crank, one-sided operation on the left, 1 drop support at the rear Axles 2 BPW axles with disc brakes ø370 mm, load capacity 7 t/axle, for "E" tires Axle spacing 1,260 mm Wheels 4 tires 285/70 R 19.5, 143M CONTINENTAL 4 steel rims 8.25 x 19.5 silver Brake system/suspension Brake system in accordance with EC Directive 71/320 or ECE R13 Two-line compressed air brake system Brake system made by factory EBS system 2S2M, 2nd axle sensed Electronic braking and stability system EBS-E and RSS or TEBS G2 and RSP Bcsdpji Aimrjfx Abzjw Spring-loaded parking brake on 2nd axle Aluminum air tank Brake/air connection lines with Duomatic quick coupling EBS/ABS connection cable Bracket for EBS and electrical plugs on the towing device Air suspension with lifting and lowering device Automatic adjustment to driving level from 15 km/h Assistance/safety systems Weight detection/axle load display via EBS CAN bus signal for display in the driver's cab (truck must be prepared accordingly, no calibrated scales) Lighting/electrics 24-volt lighting system in accordance with EC Directive 76/756/EEC 2 full LED module tail lights, "Hella brand" 2 LED position lights at the front 2 LED outline lights at the rear Flashing LED side marker lights, controlled by indicator signal LED license plate lights, integrated in the tail light Fixed connection cable with 1 x 15-pin plug 2 additional LED reversing lights, mounted on the rear left and right Paint Automatic blasted, arc galvanized, epoxy resin-based primer, Painting with 2K top coat using the electrostatic process Material doubling and transitions preserved with penetrating wax Chassis = RAL 9005 jet black Load securing elements = RAL 1003 signal yellow Drawbar/drawbar tube in chassis color = RAL 9005 jet black Wheel hubs black = powder-coated Underrun protection = galvanized Side collision protection = anodized Plastic parts black, unpainted P

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Center axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye & height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin electrical connector * TPMS (Tire Pressure Monitoring System) ----General Equipment: * Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear bump stops * Mechanical drop down stands at rear Bcjdpjpk D Iisfx Abzjw ----Container / Low Loader Deck: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) to guide the roll-off containers * Steel sheet floor with roller recesses in the bogie area * For roll-off container transport, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking as well as mechanical plug-in stops at the front in the running rails * Load certificate according to DIN 30722-1 * Transportation of up to 2 skip containers with a maximum of 10 m³ volume possible * Includes 8 repositionable skip stops for lateral centering of skips, front 4 skip stops plug-in with pendulum-mounted stop ----Load securing: * 3 pairs of 10 t UVV lashing rings at the sides for attaching tensioning elements for positive and non-positive securing of the skips * 4 side lashing bars in cloverleaf design and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld beads as anti-slip surface on the approach ramp running rail * 1 pair of aluminium approach ramps (16 t / pair), 2,800 x 400 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment from the rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides and rear * Axles, turntable, drawbar and air tank painted in black tone * Hot-dip galvanized main frame ----Info: * Technically permissible total weight of 27,000 kg possible * New vehicle, unregistered, with manufacturer warranty * Subject to prior sale and errors excepted ----Delivery time: * Available from week 20/2026

Condition: new, maximum load weight: 13,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, * TRA-Kombi 18.0: * Load securing package * Wabco * RDÜ tire pressure monitoring system * EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * 2 x 12-ton Gigant axles * Parabolic springs * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm draw eye and height adjustment device * Toolbox made of powder-coated steel sheet, right side * Reflective contour tape on sides and rear * Side underride protection * Plastic quarter mudguards with spray protection * Storage box for container nets, made of galvanized sheet approx. 960 x 300 x 400 / 450 mm, right side * Rear plastic bumper buffers * LED tail lights * 15-pin power connector * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roll-off containers * Steel floor with recesses for rollers in the bogie area * For roll-off container transport, suitable for container length from 5,500 to 7,000 mm * Pneumatic 4-point clamp lock and mechanical plug-in front stop blocks in the running track, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 repositionable skip stops for lateral centering of the skips, front 4 skip stops plugged in with swiveling bump stops * 3 pairs of 10-ton UVV lashing rings on the side for attaching tensioning elements for positive and non-positive securing of the skips, 4 cloverleaf-shaped lashing brackets (side) each, and 1 pair of 13.4-ton UVV lashing rings at the front, load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Welded bead as an anti-slip surface in the drive-up area * Mechanical rear supports * 1 pair of aluminum approach ramps (10.6 tons / pair) 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment accessible from the rear) * 235/75 R 17.5 twin tires * Unladen weight: 4,360 kg * Technically permissible gross weight: 20,000 kg Bodpfx Abjl Thwcszscw * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Immediately available from Egestorf

Condition: new, power: 132 kW (179.47 HP), number of beds: 4, number of seats: 4, fuel type: diesel, gearing type: automatic, color: white, total length: 7,890 mm, total width: 2,320 mm, total height: 2,920 mm, overall weight: 4,500 kg, empty load weight: 4,040 kg, maximum load weight: 460 kg, wheelbase: 445 mm, Equipment: ABS, cruise control, fog lights, immobilizer system, traction control, Highlights: * Face to Face seating Safety: * Third brake light * ABS * Traction control (ASR) * Electronic Stability Program (ESP) * Reversing camera * Summer tires * Immobilizer * Passenger airbag * Driver airbag Lighting: * LED headlights * Fog lights Bsdpfxsv Dnd He Abzocw Comfort: * Heated exterior mirrors * Electrically adjustable exterior mirrors * Electric windows * Height-adjustable driver’s seat * Automatic climate control * Leather steering wheel * Multifunction steering wheel * Multimedia system * Cruise control * Remote central locking Radio/Navigation: * Bluetooth hands-free system * DAB+ digital radio * Hands-free system * Navigation system * USB port Motorhome-specific features: * Overcab / drop-down bed * Double floor * Single beds * Rear garage * Awning * Side seating group * Separate shower Other: * Alloy wheels Further description: Furniture décor “Navarra,” upholstery fabric “Pisa,” decoration “Lasca,” Luminary package Integra 2-axle, naviceiver with dual rear-view camera, steering wheel with controls, pre-wiring for solar panel, driver’s cab carpet, Fiat automatic transmission, 16" alloy wheels, exterior graphics carbon, chrome elements front/rear area, LED cornering lights, LED fog lights, front flat-screen TV mount, rear flat-screen TV slide-out, rear garage organizer system, sound system, automatic climate control, leather steering wheel/gear knob, mobile phone wireless charging station, heat exchanger, comfort seats in cab, Luminary Plus package Integra 2-axle, multifunction socket, exterior shower (hot/cold), external gas outlet, windshield wiper system with winter park position, heated windshield, lithium battery, 5.5 m awning, heated front windshield, underfloor camera for tank drainage, documentation fee --- We strive to describe the offered vehicle as accurately as possible. However, errors may occur. Therefore, please specifically consult our sales staff if you place importance on a particular feature. Subject to prior sale and errors. --- Model/year: 2024, New MOT: yes, Internal ID: N0041660, Engine details: Euro 6dT Final 8, Transmission: automatic, Body length: 789 cm, Unladen weight: 4,040 kg, Payload: 460 kg, Sleeping areas: Rear (195x80) Rear (200x80) Drop-down bed (193x150), Seats with belts: 4, Wheelbase: 445 cm, Trailer load (braked): 1,500 kg, Trailer load (unbraked): 750 kg, Heating: Alde hot water heating, Fridge volume: 157 l, Freezer volume: 15 l, Fresh water: 140 l, Fresh water (incl. boiler): 160 l, Waste water tank volume: 100 l, Charger: 18 A, Battery: 100 Ah, Upholstery: fabric, 230V sockets: 3, 12V sockets: 1, Other: new MOT, CHASSIS: ASR, ABS, fog lights, central locking w/ remote, torque converter automatic, electric mirrors, jack, Fix & Go kit, multifunction steering wheel, alloy rims, immobilizer, third brake light, cruise control, heated exterior mirrors, 90 l diesel tank, ESP incl. hill holder, driver airbag, passenger airbag, BODY: Electric entry step, one-piece entry door with window, blinds to left and right, GRP body, windscreen roller blind, entry door fly screen, third brake light, awning light, opening windows all around, awning, garage door, gas locker, framed windows, midi-heki, bin in the door, INTERIOR: cassette blinds, fly screen entry door, power-operated front roller blind, fixed bed, KITCHEN: Range hood, AES fridge, 3-burner stove, waste bin, SANITARY: Pressurized water system, waste water, electric...

Condition: new, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA 18.0: * 2 in 1 = suitable for roll-off containers and as a low-loader ----Brakes: * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10 ton axles ----Suspension: * Air suspension with lift and lower function and RTR valve ----Drawbar: * Drawbar, 2,000 mm long with 40 mm towing eye and height adjustment ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal - no installation required on the truck side * LED tail lights 12 / 24 V * 15-pin power plug ----General Attachments: * Toolbox made of powder-coated sheet steel, approx. 1,000 x 300 x 600 mm * Storage box for container net made of galvanized sheet, 960 x 300 x 450/400 mm * Reflective contour tape on sides and rear * Side underrun protection * Plastic quarter mudguards with splash protection * Rear plastic bumper pads * Foldable 'A' sign at the rear ----Loading Area: * Main frame with raised outer frame for guiding roll-off containers * Steel floor with roller recesses in the bogie area * Container length from 5,500 - 7,000 mm possible * Pneumatic 4-point container locking clamp and mechanically insertable stop brackets at the front of the running rail, load securing certificate according to DIN 30722-1 * Weld bead as anti-slip coating in the running rail area of the inclined ramp * Mechanical drop-down supports at rear ----Load Securing: * 1 pair of 10 t UVV lashing rings at the front of the front wall cross member * 3 pairs of 10 t UVV lashing rings on the sides of the outer frame * On each side, 4 x 2 t cloverleaf-style lashing eyes * 4 x 8 t recessed lashing brackets in the outer frame ----Ramps: Bjdpfxjl Tq Nmj Abzocw * 1 pair of aluminum approach ramps (10.6 t / pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Paintwork: * Chassis, bogie, locking parts, rear drop-down supports hot-dip galvanized * Drawbar, axles, and air tanks painted in black tone ----Information: * New vehicle without initial registration with full manufacturer's warranty * Errors and prior sale reserved * Sample images ----Delivery Time: * Available approx. from calendar week 23 / 2026

Condition: new, maximum load weight: 13,490 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, TRA-Kombi 18.0: * 3 in 1 = for roll-off containers, skip containers, and as a low-loader ----Braking system: * EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10.5 ton axles ----Suspension: * Air suspension with manual rear lowering ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * TPMS (Tyre Pressure Monitoring System), displayable in the truck via EBS signal (no installation required on the truck side) * LED tail lights 12 / 24 V * 15-pin power connector ----General attachments: * Tool box made of powder-coated sheet steel * Spare wheel holder in basket design, right side * Closed side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact protection buffers * Foldable A-sign at rear ----Loading platform: * Hot-dip galvanized main frame with raised outer frame for guiding roll containers * Steel plate floor with roller recesses in the bogie area * Suitable for roll-off containers with length from 5,500 to 7,000 mm * Pneumatic 4-point clamp locking system and mechanically insertable stop angles at the front in the track * For transport of up to 2 skip containers with max. 10 m³ volume * Includes 8 plug-in skip stops for lateral centering of the skips, front 4 skip stops plug-in with swiveling stop * Weld bead as anti-slip coating in the ramp track area * Mechanical drop-down support legs at the rear ----Load securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and non-positive securing of skips; 4 clover-leaf lashing bars on each side * 1 pair of 13.4 t UVV lashing rings to the front * 4 x 8 t lashing eyes on each side, recessed into the outer frame Bedpfxowb Rake Abzocw ----Ramps: * Aluminum approach ramps (10.6 t / pair), 2,800 x 470 mm; suitable for rubber-tired and tracked vehicles (lockable storage compartment at rear) ----Paintwork: * Reflective contour tape on sides and rear * Frame hot-dip galvanized * Axles, drawbar painted black ----Information: * Load securing certificate according to DIN 30722-1 * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * --Permissible gross weight of 20,000 kg technically possible-- * New vehicle without initial registration with manufacturer warranty * Errors and prior sale excepted ----Delivery time: * Available immediately ex Egstorf

Condition: used, maximum load weight: 14,250 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2021, total width: 2,500 mm, Year of construction: 2020, Equipment: ABS, WS Trucks GmbH: Your Reliable Partner for Commercial Vehicles Expertise and Service from One Source WS Trucks GmbH is your reliable partner for the purchase and sale of commercial vehicles. With over 25 years of experience, we offer you a wide range of used and new trucks, livestock carriers, refrigerated vehicles, trailers, and semi-trailers. --- Equipment Hüffermann HAR 20.67 * Roll-off trailer * Air suspension * ABS * Tyres: see photos * Twin tyres * Permissible gross weight: 18,000 kg * Unladen weight: 3,756 kg * Payload: 14,244 kg * Immediately available Errors and omissions excepted. --- Our Services for You: Individual Consultation: We take time to understand your requirements and find the right vehicle for you. * Financing: We provide attractive financing and leasing options. * Trade-in: We offer fair appraisals for your used vehicle and accept it as a trade-in. * Registration & Deregistration: We handle all registration formalities for your new vehicle and the deregistration of your old vehicle. * Complete Export Handling: We manage the entire customs processing. * Maintenance & Repairs: Our specialized workshop is responsible for the maintenance and repair of your vehicle. Your Advantages: * Expertise: We are commercial vehicle specialists and have in-depth market knowledge. * Reliability: We keep our promises and provide advice and support when you need it. * Service: We offer you comprehensive service from a single source. * Quality: We only supply high-quality vehicles from reputable manufacturers. Our Core Competency: Livestock and Meat Transportation Vehicles: * Extensive know-how: We understand the specific requirements of livestock and meat transport and will gladly advise you in selecting the right vehicle. * Wide selection: We offer a large selection of vehicles from various manufacturers and in different price ranges. * Quality: We only supply high-quality vehicles from reputable manufacturers. * Comprehensive service: From consultation and financing to maintenance and repair, we offer you complete service from one source. Krone Trailer Partner WS Trucks GmbH is your partner for Krone trailers. As a Krone Trailer Partner, we offer a wide selection of new and used Krone semi-trailers. Menke-Janzen Partner WS Trucks GmbH is also a partner of Menke-Janzen Fahrzeugbau. As a Menke-Janzen partner, we offer a wide range of new and used livestock transporters. We assist you with the planning and realization of your new livestock transporter from 3.5t to 40t. Further information: * Website: * Phone: * E-mail: Bcedpferwda Dex Abzew WS Trucks GmbH: Your partner for commercial vehicles

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: * EBS braking system * TPMS tire pressure monitoring * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical rear axle equalization * Lateral underrun protection * Swing-down supports at the rear of the chassis frame * Mechanically adjustable warning panel kits at front and rear * Front: closed plastic mudguards, rear: straight, galvanized steel skirts, each with spray protection * Reflective contour marking tape on sides and rear * Hinged lid (hot-dip galvanized) for toolbox in the bogie platform * Multi-voltage system * LED tail lights * Removable revolving beacon at rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * 15-pin electrical connector * Four stake pockets each side (stakes not included), can also be used as lashing points * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the bogie platform, 5 pairs of UVV-compliant folding and lowering lashing rings, loadable in all directions and recessed in the outer frame – in the corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding outriggers for 3 m total width (not in the rear taper) * Widening boards stored in the center of the loading area * Excavator stick trough over rear axle up to end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator stick trough) * Hydraulically operated one-piece access ramps (approx. 3,000 x 720 mm) * 4-section control valve for future retrofitting of hydraulic ramp shift * Mechanical lateral ramp shifting * Load area above slewing ring: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear load area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, bogie, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in black Bcsdpfxol Thxdj Abzjw * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Gross weight of 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and intermediate sale excepted * Available from week 18/2026

Condition: new, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA 18.0: * 2 in 1 = for roll-off containers and as a low loader ----Brakes: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes Bcedsl Tpc Aepfx Abzow ----Axles: * 2 x 10-tonne axles ----Suspension: * Air suspension with lifting and lowering device plus RTR valve ----Drawbar: * Drawbar, 2,000 mm long with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * Tire pressure monitoring system with display option in truck via EBS signal – no in-truck installation required * LED rear lights 12 / 24 V * 15-pin power connector ----General Attachments: * Tool box made of powder-coated sheet steel, approx. 1,000 x 300 x 600 mm * Storage box for container net, made of galvanized sheet metal, 960 x 300 x 450/400 mm * Conspicuity tape, reflective on sides and rear * Side underride guard * Plastic quarter mudguards with spray protection * Plastic rear impact buffer * Foldable "A"-sign at the rear ----Load Area: * Main frame with raised outer rails for guiding roll-off containers * Steel floor with recesses for rollers in bogie area * Container length possible from 5,500 - 7,000 mm * Pneumatic 4-point locking clamps and front mechanical plug-in stop angles in the running rails, load securing certificate per DIN 30722-1 * Weld bead as anti-slip coating in ramp running area * Mechanical drop-down supports at the rear ----Load Securing: * 1 pair of 10 t UVV lashing rings at the front bulkhead support * 3 pairs of 10 t UVV lashing rings on the sides of the outer frame * On each side, 4 x 2 t cloverleaf-design lashing eyes * 4 x 8 t recessed lashing brackets in the outer frame ----Ramps: * 1 pair of aluminum approach ramps (10.6 t / pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment at rear) ----Paintwork: * Chassis, bogie, locking parts, rear drop-down supports galvanized * Drawbar, axles, air reservoirs painted in a shade of black ----Info: * New vehicle without initial registration, with full manufacturer's warranty * Subject to errors and prior sale * Sample pictures ----Delivery time: * Available from approx. calendar week 23 / 2026