Used Müller-Mitteltal Roll-Off Trailers for sale (255)

Condition: new, Year of construction: 2026, New model, now with a total weight of 9,900 kg! Cable drum transport trailer. Permissible total weight 9,900 kg, payload approx. 7,000 kg (standard equipment). Hydraulic lifting and lowering of the cable drum either from the towing vehicle or using a separate engine (4-stroke petrol; 8.1 kW; electric start) with weather protection cover, hydraulic drum drive with rubber-coated drive rollers, drum diameter 800–3,000 mm, drum width up to approx. 1,650 mm, centering cones for cable drums. Two-speed support winch at the front, extendable rear support. BPW axle, EBS, parabolic suspension, tyres 315-80R22.5, tire pressure monitoring. 40 mm height-adjustable drawbar eye, two-line air, LED lighting 12+24 V. Toolbox, advertising panels in the side underrun protection. Vehicle fully hot-dip galvanized. New vehicle incl. factory warranty. Available from approx. CW 26-2026. (Archive photos) = Further information = Unladen weight: 2,900 kg Bjdoyyhb Nepfx Ahyjwk Payload: 7,000 kg total weight: 9,900 kg Front tyres: 315-80R22.5 Country of manufacture: Germany Please contact Jan-Marc Schwickert for further information.

Condition: used, maximum load weight: 19,800 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 01/2019, Equipment: ABS, * Müller Mitteltal 3-axle trailer for demountable containers * Model TM 2 24 * For two demountable containers from 7 to 10 m³ * Load securing with only two chains per container * Twin tyres 265/70 R19.5 * Air suspension * BPW axles * Turntable drawbar pneumatically lowerable with pneumatic release * 8 UVV lashing rings (5t) for attaching tensioning elements * 8 adjustable container stops for lateral centering of containers * EBS * Technically permissible gross weight 27,000 kg Bwjdoyx R Enopfx Ahyok

Condition: used, maximum load weight: 13,640 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2019, loading space length: 7,000 mm, loading space width: 2,450 mm, loading space height: 1,000 mm, total width: 2,500 mm, HU: NEW Gross weight: 18,000 kg/20,000 kg Unladen weight: 4,360 kg Payload: 13,640 kg/15,640 kg Bedpfxeyw Ep So Ahyewk Additional information - Twin tyres 235/75R17.5 - Gigant axles - 4 pairs of lashing rings - Pneumatic locking - Lowerable turntable chassis - Loading ramps approx. 2,300 mm in storage compartment - Rear support leg - Storage box - Underrun protection

Condition: new, maximum load weight: 13,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, * TRA-Kombi 18.0: * 3 in 1 = for hooklift containers, skip containers, and as a low-loader ----Brakes: * Tire Pressure Monitoring System (RDÜ) * EBS-E (electronic braking system) * Emergency release device for spring brake cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm length * 40 mm towing eye and height adjustment mechanism ----Electrics / Lighting: * LED tail lights * 15-pin power connector * Tire Pressure Monitoring (RDÜ), can be displayed in the truck via EBS signal (no installation required on the truck side) ----General Attachments: * Tool box made of powder-coated steel sheet, right side * Side underride guard * Plastic quarter mudguards with spray protection * Storage box for container nets, made of galvanized sheet, approx. 960 x 300 x 400 / 450 mm, right side * Rear plastic impact bumpers * Mechanical drop-down rear supports ----Loading area: * Hot-dip galvanized main frame with raised outer frame (~25 mm) for guiding roll-off containers * Steel floor with recessed roller areas in the bogie zone * For roll-off container transport, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking and mechanically lockable adjustable front stops in the track, cargo securing certificate compliant with DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ capacity possible * 8 relocatable trough stops for lateral centring, front 4 stops with pendulum adjustable stops * Weld bead as anti-slip coating in the ramp track area ----Load securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and friction-locked securing of the containers * 4 cloverleaf-type lashing eyes per side * 1 pair of 13.4 t UVV lashing rings at the front ----Ramps: Bedpfx Ahol Thwceyowk * 1 pair aluminium approach ramps (10.6 t/pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment from the rear) ----Notes: * Cargo securing certificate in accordance with DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Permissible gross weight of 20,000 kg technically possible * New vehicle with manufacturer's warranty * Subject to prior sale and errors ----Delivery time: * Immediately available ex Egestorf

Condition: new, maximum load weight: 13,490 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, TRA-Kombi 18.0: * 3 in 1 = for roll-off containers, skip containers, and as a low-loader ----Braking system: * EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10.5 ton axles ----Suspension: * Air suspension with manual rear lowering ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * TPMS (Tyre Pressure Monitoring System), displayable in the truck via EBS signal (no installation required on the truck side) * LED tail lights 12 / 24 V * 15-pin power connector ----General attachments: * Tool box made of powder-coated sheet steel * Spare wheel holder in basket design, right side * Closed side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact protection buffers * Foldable A-sign at rear ----Loading platform: * Hot-dip galvanized main frame with raised outer frame for guiding roll containers * Steel plate floor with roller recesses in the bogie area * Suitable for roll-off containers with length from 5,500 to 7,000 mm * Pneumatic 4-point clamp locking system and mechanically insertable stop angles at the front in the track * For transport of up to 2 skip containers with max. 10 m³ volume * Includes 8 plug-in skip stops for lateral centering of the skips, front 4 skip stops plug-in with swiveling stop * Weld bead as anti-slip coating in the ramp track area * Mechanical drop-down support legs at the rear ----Load securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and non-positive securing of skips; 4 clover-leaf lashing bars on each side * 1 pair of 13.4 t UVV lashing rings to the front * 4 x 8 t lashing eyes on each side, recessed into the outer frame ----Ramps: * Aluminum approach ramps (10.6 t / pair), 2,800 x 470 mm; suitable for rubber-tired and tracked vehicles (lockable storage compartment at rear) ----Paintwork: * Reflective contour tape on sides and rear * Frame hot-dip galvanized * Axles, drawbar painted black ----Information: Bodpfx Aswb Rakshyewk * Load securing certificate according to DIN 30722-1 * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * --Permissible gross weight of 20,000 kg technically possible-- * New vehicle without initial registration with manufacturer warranty * Errors and prior sale excepted ----Delivery time: * Available immediately ex Egstorf

Condition: new, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA 18.0: * 2 in 1 = for roll-off containers and as a low loader ----Brakes: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10-tonne axles ----Suspension: * Air suspension with lifting and lowering device plus RTR valve ----Drawbar: * Drawbar, 2,000 mm long with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * Tire pressure monitoring system with display option in truck via EBS signal – no in-truck installation required * LED rear lights 12 / 24 V * 15-pin power connector ----General Attachments: * Tool box made of powder-coated sheet steel, approx. 1,000 x 300 x 600 mm * Storage box for container net, made of galvanized sheet metal, 960 x 300 x 450/400 mm * Conspicuity tape, reflective on sides and rear * Side underride guard * Plastic quarter mudguards with spray protection * Plastic rear impact buffer * Foldable "A"-sign at the rear ----Load Area: * Main frame with raised outer rails for guiding roll-off containers * Steel floor with recesses for rollers in bogie area * Container length possible from 5,500 - 7,000 mm * Pneumatic 4-point locking clamps and front mechanical plug-in stop angles in the running rails, load securing certificate per DIN 30722-1 * Weld bead as anti-slip coating in ramp running area * Mechanical drop-down supports at the rear ----Load Securing: * 1 pair of 10 t UVV lashing rings at the front bulkhead support * 3 pairs of 10 t UVV lashing rings on the sides of the outer frame * On each side, 4 x 2 t cloverleaf-design lashing eyes * 4 x 8 t recessed lashing brackets in the outer frame ----Ramps: * 1 pair of aluminum approach ramps (10.6 t / pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment at rear) ----Paintwork: * Chassis, bogie, locking parts, rear drop-down supports galvanized * Drawbar, axles, air reservoirs painted in a shade of black ----Info: * New vehicle without initial registration, with full manufacturer's warranty * Subject to errors and prior sale * Sample pictures ----Delivery time: Bodpjl Tpc Aofx Ahyjwk * Available from approx. calendar week 23 / 2026

Condition: new, maximum load weight: 14,620 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Year of construction: 2026, * RA-T 18.0 / 018: * Wabco EBS-E (electronic braking system) * TPMS tire pressure monitoring system * Emergency release device for spring brake cylinders * Disc brakes * 2 x 10 t BPW wide-track axles * Air suspension (automatic lowering when uncoupling the brake) * Drawbar approx. 2,300 mm long with 40 mm towing eye and height adjustment via drawbar spring and turnbuckle * Plastic toolbox 450 x 470 mm mounted on the right side * Side net box 1,000 x 500 x 500 mm * Enclosed plastic mudguards front and rear * Enclosed side underrun protection suitable for advertising * Rear underrun protection * Plastic rear impact buffers * Rear hazardous goods sign * 15-pin electrical connector * LED tail lights * Roller bed length approx. 6,830 mm * Pneumatic 4-point clamping lock * Mechanically adjustable end stops (2 positions) front left and right on the running rails * 265/70 R 19.5 twin tires * Unladen weight 3,220 kg Bsdpfev Nulzjx Ahyswk * --Technically permissible total weight of 20,000 kg-- * Approx. 1,130 mm ride height when loaded * Suitable for container lengths of 5,500 - 7,000 mm * Hot-dip galvanized chassis * Air reservoirs, axles, turntable and drawbar * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available immediately from Egestorf

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Center axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye & height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin electrical connector * TPMS (Tire Pressure Monitoring System) ----General Equipment: * Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with splash protection * Plastic rear bump stops Bjdpfx Aspk D Iiohyowk * Mechanical drop down stands at rear ----Container / Low Loader Deck: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) to guide the roll-off containers * Steel sheet floor with roller recesses in the bogie area * For roll-off container transport, container length from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking as well as mechanical plug-in stops at the front in the running rails * Load certificate according to DIN 30722-1 * Transportation of up to 2 skip containers with a maximum of 10 m³ volume possible * Includes 8 repositionable skip stops for lateral centering of skips, front 4 skip stops plug-in with pendulum-mounted stop ----Load securing: * 3 pairs of 10 t UVV lashing rings at the sides for attaching tensioning elements for positive and non-positive securing of the skips * 4 side lashing bars in cloverleaf design and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld beads as anti-slip surface on the approach ramp running rail * 1 pair of aluminium approach ramps (16 t / pair), 2,800 x 400 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment from the rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides and rear * Axles, turntable, drawbar and air tank painted in black tone * Hot-dip galvanized main frame ----Info: * Technically permissible total weight of 27,000 kg possible * New vehicle, unregistered, with manufacturer warranty * Subject to prior sale and errors excepted ----Delivery time: * Available from week 20/2026

Condition: new, maximum load weight: 14,550 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Year of construction: 2026, * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * 19.5" disc brakes * Automatic braking when opening the cross-bracing units * 2 x 10 t BPW wide track axles * Air suspension (automatic lowering when brake is uncoupled) * Tire pressure monitoring with in-cab display via EBS signal—no truck-side installation required Bedpfjl Tn U Rex Ahyjwk * Pneumatically lowerable drawbar, 1,800 mm long, with 40 mm towing eye and height adjustment via tension spring and turnbuckle * Plastic toolbox, 858 x 500 x 500 mm, mounted right side * Container net storage box made of galvanized perforated sheet, 1,000 x 500 x 500 mm, side-mounted * Enclosed plastic mudguards front and rear * Closed side underrun protection (RAL 9010 pure white), suitable as advertising space * Rear underrun protection * Rear plastic impact buffers * Folding "A" warning plate * Hazardous goods sign with accompanying document pocket and reflective rear parking warning sign * 15-pin power connector * LED lighting system with protective cover * 2 LED reversing lights (activated by reverse gear) * Additional front loading with rear running rail lowering and removable stops * Roller recesses in the area of the turntable with mechanically adjustable stop angles (2 positions) at the front left and right on the running rails * Roller rail length approx. 6,830 mm * Pneumatic 4-position clamp lock * For transporting external roll containers according to DIN 30722 Part 1—DEKRA load securing certificate available * Loaded floor height approx. 1,130 mm * Chassis and locking components hot-dip galvanized * Air tanks, axles, turntable, and drawbar painted in black * --Permissible gross weight of 20,000 kg technically possible-- * New vehicle without first registration, includes manufacturer's warranty * Subject to errors and prior sale * Available approx. from calendar week 21/2026 * Sample images

Condition: used, maximum load weight: 14,300 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 07/2023, next inspection (TÜV): 11/2026, Year of construction: 2023, * HL - TA 20.0 ---- Brakes: * Wabco EBS-E braking system * Emergency release device for spring brake cylinders * Drum brakes * Duomatic brake coupling ---- Axles: * 2 x ton SAF axles * 1st axle as lift axle (fully automatic) * Lift axle with +30 mm driving height via control cylinder * Start-up assist function for maneuvering and forced lowering onto the first axle—controlled via speed-dependent EBS electronics—(no truck-side installation necessary, includes cable for operation from the tractor) ---- Air Suspension: * Air suspension with lowering function via remote control ---- Drawbar / Flange Eye: * 50 mm flange-mounted drawbar eye — height adjustable by +77 mm and -33 mm — for 2 tons vertical load ---- Electrical / Lighting: * 15-pin power plug * 3-pin 12V auxiliary connector * LED lighting system 12 / 24V * 2 LED reversing lights activated by reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connection cables for agricultural and forestry vehicles * Power supply for remote control: 12+24 V via tail light ---- General Accessories: * BPW landing gear at front * Mechanically extendable underrun protection for containers over 6,000 mm in length * Speedline diamond aluminum rims * Detachable towing pin coupling (use only when underrun protection is retracted) * Enclosed plastic half-shell single mudguards * Two-step access in front of the front wall on the left * Shovel and broom holder in front of the front wall * 2 stainless steel toolboxes, matt finish, approx. 650 x 350 x 320 mm, right side * Enclosed side impact protection usable as advertising surface ---- Hydraulics: * 2-circuit hydraulic connections (engine-side from truck/tractor) designed for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted on the right side at the front wall) operated via remote control ---- Hook Lift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (serial no. 100746129, year 2023) * Base frame made of high-strength fine-grained steel * 20,000 kg pull force * Hook height 1,570 mm * Hooklift operation via remote control * Remote control with fast function for lowering, not for lifting * Emergency stop buttons, left and right sides * Container bearing with 4 lateral supports each side and 1 roller at the rear * Hydraulic internal locking mechanism at the rear * 2 additional hydraulic cylinders to assist lifting the main arm * 2 mechanical drop-down supports at the rear * Approved for 20 tons gross weight (2 x 9 tons axles) and 2 tons vertical load * Note: If the remote control is outside the charging cradle, the service brake must be engaged to activate the remote control. Brake connections must remain connected to open hydraulic/pneumatic valves * Monitoring system for underrun protection to ensure it is retracted during tipping ---- Loading Height: * Unladen, approx. 1,300 mm with lowered lift axle ---- Paintwork: * Chassis, drawbar, access steps, underrun protection, and support legs are hot-dip galvanized * Axles, air tanks, and front landing gear are painted in black * Palfinger hooklift painted black/yellow Bedpfsyfy Rrjx Ahyswk ---- Information: * Subject to errors and prior sale * Vehicle is in very good / as-new condition ---- Container Dimensions: * Internal length: 5,500 mm * Internal width: 2,300 mm * Internal height: 1,000 mm Info: * Mounting lugs for hooklift systems present

Condition: used, maximum load weight: 14,300 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 07/2023, next inspection (TÜV): 11/2026, Year of construction: 2023, * HL - TA 20.0 ----Brakes: * Wabco EBS-E brake system * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake connector ----Axles: * 2 x tons SAF axles * 1st axle is a lift axle (fully automatic) * Lift axle with +30 mm driving height via actuator cylinder * Start-off assistance for shunting and forced lowering on the first axle – controlled via speed-dependent EBS electronics (no truck-side installation required, additionally with cable for operation in the tractor) ----Air Suspension: * Air suspension with lowering function via remote control ----Drawbar / Flange-Towing Eye: * 50 mm flange bolt towing eye – height adjustable by +77 mm and -33 mm – for 2 t vertical load ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary connector * LED lighting system 12 / 24V * 2 LED reversing lights activated via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connection cables for agricultural and forestry vehicles * Power supply for remote control 12+24 V via tail lights ----General Attachments: * BPW landing leg at the front * Mechanical extendable underrun protection for container lengths over 6,000 mm * Speedline diamond aluminium rims * Locking pin tow coupling (use only when underrun protection is retracted) * Closed plastic half-shell single fenders * Two-step access in front of the front bulkhead on the left * Shovel and broom holder in front of the front bulkhead * 2 stainless steel toolboxes – matte – approx. 650 x 350 x 320 mm, mounted on the right side * Closed side underrun protection usable as advertising space Bedex Dp Atopfx Ahyewk ----Hydraulics: * 2-circuit hydraulic connectors (powered from truck/tractor) designed for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted front right) with control via remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (serial no. 100746129, year 2023) * Base frame made of high-strength fine-grain steel * 20,000 kg lifting capacity * Hook height 1,570 mm * Hooklift control via remote control * Remote control with fast function when unloading, but not when pulling on * Emergency stop switches left and right * Container bed with four supports on each side and one roller each at the rear * Hydraulic rear inner locking * 2 additional hydraulic cylinders for assisting the lifting of the main arm * 2 x mechanical drop-down supports at the rear * Approved for 20 t gross vehicle weight (2 x 9 t axles) and 2 t vertical load * Note: If the remote control is outside the charging cradle, the service brake must be applied so the remote is enabled. The brake connections must remain connected to enable hydraulic/pneumatic valve actuation. * Monitoring system for underrun protection to ensure it is retracted during tipping ----Load Height: * Unloaded approx. 1,300 mm with lowered lift axle ----Paintwork: * Chassis, drawbar, access steps, underrun protection, and drop-down supports are hot-dip galvanized * Axles, air tanks, front landing leg painted in black * Palfinger hooklift painted black/yellow ----Information: * Errors and prior sale reserved * Vehicle is in very good / as new condition ----Delivery Time: * Vehicle is available immediately

Condition: new, maximum load weight: 12,200 kg, overall weight: 14,400 kg, axle configuration: 2 axles, Year of construction: 2026, * TM-TA 14.4: ----Braking system: * Wabco EBS – electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange towing eye: * Height-adjustable galvanized drawbar, +/- 150 mm * 40 mm flange towing eye Bsdpjpk Dyxjfx Ahyswk ----Electrics / Lighting: * 15-pin power connector * LED tail lights * RDÜ tire pressure monitoring system ----General attachments: * Jost landing leg at the front * 2 x external drop-down supports at the rear * Enclosed single plastic mudguards * Foldable "A" warning sign at the rear * Plastic impact buffers on underrun protection * Galvanized underrun protection with integrated chain storage box, dimensions: W = 370 mm x D = 420 mm x H = 480 mm, front left & right ----Load securing: * 2 x 5.3 t UVV lashing rings per side for attaching tensioning devices * Including 2 permanently mounted ratchet tensioners with chain box on the outer frame * Equalizing chain on both sides with eye and quick shortening device in special Y-configuration, 6.3 t ----Container stops: * 2 removable container stops for lateral centering of containers * Front container stops with pendulum-stop, can be inserted in 4 positions ----Painting: * Galvanized chassis * Axles, springs, air tank and landing leg painted in black ----Information: * Lashing force with load securing certificate * Subject to error and prior sale * New vehicle with manufacturer’s warranty ----Delivery time: * Available from calendar week 05 / 2026

Condition: new, maximum load weight: 12,200 kg, overall weight: 14,400 kg, axle configuration: 2 axles, Year of construction: 2026, * TM-TA 14.4: ----Braking system: * Wabco EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensator unit ----Drawbar / Drawbar Eye: * Height-adjustable, hot-dip galvanized drawbar, +/- 150 mm * 40 mm flanged drawbar eye ----Electrics / Lighting: * 15-pin power connector * LED rear lights * RDÜ tire pressure monitoring system Bodsl Thyqspfx Ahyowk ----General fittings: * Jost landing gear at the front * 2 x external drop-down supports at the rear * Closed single plastic mudguards * Folding "A" sign at the rear * Plastic underrun protection bumpers * Hot-dip galvanized front crash protection with integrated chain storage box, dimensions: W=370 mm x D=420 mm x H=480 mm, front left & right ----Load securing: * On each side, 2 x 5.3 t UVV lashing rings for attaching lashing elements ----Container stops: * 2 removable container stops for lateral centering of the containers * Front container stops with pivoting rest, lockable in 4 positions ----Paintwork: * Hot-dip galvanized chassis * Axles, springs, air tanks, and landing gear painted in black ----Information: * Subject to errors and prior sale * New vehicle with manufacturer’s warranty ----Delivery time: * Available from calendar week 05 / 2026

Condition: new, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Year of construction: 2026, RAK 18.0 Outer-Roller with Rear Tipping Function ----Brakes: * Wabco EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes Bedjx Ipa Aepfx Ahyowk ----Axle: * BPW Eco Plus axles ----Suspension: * Air suspension (automatically lowers when the brake is disconnected) ----Drawbar: * Pneumatically lowerable drawbar, approx. 2,100 mm long, with 40 mm towing eye and height adjustment via tension spring & turnbuckle ----General Attachments: * Plastic toolbox, approx. 858 x 500 x 500 mm, mounted right side * Enclosed plastic mudguards, front and rear axle * Enclosed lateral underrun protection * Bolt-on rear underrun protection * Storage box for container nets, made of galvanized perforated sheet, approx. 1,000 x 500 x 500 mm * Foldable "A-sign" at rear * Rear collision protection buffer ----Electrics / Lighting: * EBS multi-voltage system for towing vehicles with 12 & 24V electrical system * 15-pin 24V power connector * LED lighting system for 12 & 24V * 2 additional LED reversing lights * RDÜ tire pressure monitoring system ----Suitable for Container Lengths: * For containers 6,500 mm to 7,000 mm in length ----Container Running Surface / Tipping Platform: * External roller guidance via flat steel limitation with a clear width of approx. 2,180 mm, paired with three lateral centering pieces on each side for container guidance * At the rear, two recessed, tipping frame-integrated roller bearings with pneumatic longitudinal anti-slip locks are installed to hold and stop container rollers * Positive locking of roll-off containers via a pneumatically operated cross-clamping unit (single-side operation) installed at the front end of the tipping frame and operable from the outside * Chassis frame with rearward-tipping main frame – single-tube, engine-hydraulic tipping system * Tipping angle 42° * Rubber pads between chassis and tipping frame * Containers are pushed on from the front; hot-dip galvanized chassis ----Tires: * Single tires 385/55 R 22.5 ----Loading Height: * Approx. 1,270 mm unladen ----Finish: * Rear underrun protection and locking components (without topcoat) * Turntable, air tanks, axles, slewing ring, and drawbar painted in black shade * Hot-dip galvanized ----Information: * For container transport per DIN 30722 Part 1 * New vehicle without initial registration, with manufacturer’s warranty * Errors and prior sale excepted * Sample images (actual vehicle may differ due to special equipment) ----Delivery Time: * Available from CW 24/2026 (calendar week)

Condition: new, maximum load weight: 14,650 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Year of construction: 2024, * RS-T 18.0 / 018: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring * Emergency release device for spring-loaded cylinders * Disc brakes * Duomatic brake connection * 2 x 10 ton SAF axles * Air suspension with automatic lowering when the brake is uncoupled * Pull scissors 2,300 mm long with 40 mm towing eye and height adjustment via tension spring & spindle * Plastic tool box on the right side, closed. Plastic fenders Bwjdpfxjl Tqkws Ahyok * closed side impact protection as advertising space * underrun protection with 2 impact buffers * foldable A-sign at the rear for waste disposal * LED tail lights with protective roof * 2 x 7-pin power plugs * hot-dip galvanized chassis (without air tank, axles, pull scissors, etc.) * roller track length approx. 6,950 mm * roller container is clamped by pneumatic 4-way claw locking * there are 2 plug-in container stops at the front with 2 additional plug-in positions * driving height unloaded approx. 1,165 mm * -- permissible total weight of 20,000 kg technically possible-- * suitable for 5,000 - 7,000 mm container lengths * new vehicle with manufacturer's warranty * errors and prior sale subject to reservation * available immediately from Egestorf

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2006, loading space length: 9,500 mm, loading space width: 2,550 mm, loading space height: 1,250 mm, * Combi trailer for roll-off & set-down containers Bwodpeizy Nyofx Ahyek * Pneumatic container locking system * Lowerable drawbar * BPW axles air/air As viewed or offered, without further services / accessories. Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! The vehicle may have advertising stickers and/or lettering. Our general terms of delivery and payment apply. We support you with export, preparation of export documents, procurement of license plates, supplier's declaration, etc.! The information provided in advertisements, the Internet, price tags and pictures are non-binding descriptions and do not serve as guaranteed characteristics. The seller accepts no liability/warranty for typing and data transmission errors. Any equipment listed must be checked separately. We expressly reserve the right to prior sale, as we also offer this item on other portals. Accessories details without guarantee. Subject to alterations, prior sale or errors excepted. We offer and strongly recommend a viewing and inspection to ensure that the buyer has no misconceptions about the condition and suitability of the item. Viewings and inspections are possible at any time by appointment and are expressly desired.

Condition: used, empty load weight: 3,750 kg, maximum load weight: 14,250 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/1993, total length: 2,450 mm, total width: 1,500 mm, suspension: steel, tire size: 385 / 65 R 22,5, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, SAF axles, leaf suspension, ABS (anti-lock braking system), aluminum side bumpers Body: 6.0 to 7.0 m container Mechanical locking ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Bedpsi Rmktefx Ahyjwk

Condition: used, empty load weight: 5,100 kg, maximum load weight: 12,900 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 12/1998, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 1 mm, total length: 2,550 mm, total width: 1,600 mm, suspension: steel, tire size: 235/75R17.5, wheelbase: 5,400 mm, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, SAF axles, turntable, leaf suspension, ABS (anti-lock braking system), lashing eyes, container lock, U-protection, pneumatic adjustable drawbar, aluminum side wheel guards, twin tyres, storage box, removable drop sides Wheelbase: 5400 mm Body: Trailer for roll-off containers in lengths 6m-6.75m SAF axles type SKRZ 11030, pneumatic low-tension hook device, 2x pockets for plug-in locking hooks, 4x pockets for plug-in container centering and skip stop. The trailer can also be used as a flatbed! Aluminum side walls 600 mm high are included with the trailer! Drive-on ramps available for an extra charge of 900.00€ net! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Bsdpfx Aji Rpxwjhyswk - .

Condition: used, empty load weight: 3,450 kg, maximum load weight: 14,550 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2010, next inspection (TÜV): 07/2025, suspension: air, tire size: 235/75R17.5, color: yellow, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, turntable trailer, air suspension, ABS (anti-lock braking system), container lock, underride protection, side aluminum side guard, twin tires. Body: 2-axle outside-roller trailer for roll-off containers from 5.5 m to 7 m or 2 x 10 m³ skip containers; BPW axles, drum brakes, pneumatic locking, pneumatic drawbar lowering. ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted! Bedewypl Nspfx Ahyewk

Condition: used, empty load weight: 3,000 kg, maximum load weight: 15,000 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 04/2007, suspension: air, tire size: 385/55R22.5, color: black, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, Body: 2-axle roll-off trailer for containers up to 7m 2x 9t BPW axles, drum brakes, 2x pneumatic locking! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Bwsdpfx Ahsi Rq Sdjyok - .

Condition: used, maximum load weight: 14,900 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 02/2010, next inspection (TÜV): 05/2025, loading space length: 7,000 mm, loading space width: 2,550 mm, total width: 2,550 mm, total height: 1,300 mm, Year of construction: 2010, Equipment: ABS, WhatsApp MÜLLER MITTELTAL RA18 trailer for roll-off containers with outer rollers 5,500 mm ? 7,000 mm, German trailer 2nd hand Technical data Suitable for roll containers with external castors in lengths 5,500-7,000 mm inside length for pushing on from the rear. Mass: Total weight 18,000 kg Unladen weight approx. 3100kg Payload in kg approx. 14,900kg Total length approx. 9,400mm Total width in mm 2,550 Tires 385/55R22.5? approx. 40-70% Equipment: ABS/EBS plug-in connection according to ISO 7638 (5- or 7-pole) Chassis Main frame, with raised outer frame for carrying the roll containers, hot-dip galvanized Container locking system: The roll container is secured at 4 points by 2 pneumatic transverse clamping units. After the container has been pushed on, the 4 securing claws are closed by actuating a valve and the container is braced against the chassis frame At the front, the container is additionally secured by 2 plug-in parts (with empty holder), which can be inserted in different positions in the track. 2x 9to BPW 420mm drum brake axles with air suspension unit Air suspension with lowering function Welded steel frame Brake system 2-line brake system according to EC regulation EBS DUOMATIC clutch head Spring-loaded parking brake Electrical system 24 Volt Multi-chamber lights 15-pin plug with connecting cable Lighting according to EC regulations Rims: Factory silver Underride protection aluminum profiles Wheel chocks with holder 1/2 shell plastic mudguards Tool box (approx. 800x300x500) Condition according to age and mileage! Bwodevg T Nyjpfx Ahyjk Transfer possible for an extra charge All information without guarantee! Sale only to traders or EXPORT ! ATTENTION PRICE IS NET PLUS VAT German, English: JOSEF WhatsApp: We speak the following languages: German, Czech, Polski, Romania, Russia, English

Condition: new, maximum load weight: 13,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, * TRA-Kombi 18.0: * 3 in 1 = for roll-off containers, skip containers, and as a low loader ----Brakes: * TPMS (tire pressure monitoring system) * EBS-E (electronic braking system) * Emergency release device for spring-loaded brake cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: * Parabolic leaf springs ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm towing eye and height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power connector * Tire pressure monitoring system (TPMS), display available in the truck via EBS signal (no truck-side installation required) ----General Fittings: * Tool box made of powder-coated steel sheet, right side * Side underrun protection * Plastic quarter mudguards with splash guards * Storage box for container nets made of galvanized sheet approx. 960 x 300 x 400 / 450 mm, right side * Plastic rear impact protection buffer * Mechanical drop-down supports at the rear ----Cargo Bed: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) to guide roll-off containers * Steel floor with roller indentations in the bogie area * For roll-off container transport, container length from 5,500 - 7,000 mm possible * Pneumatic 4-point clamping lock as well as mechanically pluggable end stops at the front of the track, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * 8 relocatable skip stops for lateral centering, front 4 skip stops installed with pendulant end stop * Weld bead as anti-slip coating in the ramp area of the track ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tie-down elements for positive and frictional securing of skips * 4 lashing brackets per side in cloverleaf design * 1 pair of 13.4 t UVV lashing rings at the front ----Ramps: * 1 pair of aluminum loading ramps (10.6 t / pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Information: * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Permissible gross weight technically up to 20,000 kg * New vehicle with manufacturer's warranty * Subject to errors and prior sale Bedpfx Ahjl Thv Rjyewk ----Delivery time: * Available immediately ex Egestorf

Condition: new, maximum load weight: 13,410 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 4,995 mm, loading space width: 2,380 mm, loading space height: 900 mm, loading space volume: 11 m³, Year of construction: 2026, * Wabco EBS-E (electronic braking system with RSS) Bsdpfxexl Nkge Ahyswk * Emergency release device for spring brake cylinders * Drum brakes * Tire pressure monitoring system with display option in the truck dashboard via EBS signal – without installation on the truck side * 2 x 9 t Gigant axles * Air suspension with level control during tipping operations * Drawbar with 50 mm flanged towing eye (adjustable by +77 mm and -33 mm using offset plate) * Jost landing gear at the front * Foldable, galvanized steel underrun protection for paver feeding * Enclosed plastic single mudguards * Standing platform at the front wall * Manual rolling tarpaulin * 15-pin electrical connector * LED tail lights with galvanized protective cover * Chassis made from fine-grain steel * Steel 3-way tipper body (side walls with MM profile – continuous without central stanchion – pivoting via manual central locking; left side foldable with tailgate spring assist) * Rolling tarpaulin similar to RAL 7038 agate grey, with tensioning by side ratchets and tensioning rubbers at front and rear * Front wall platform made of grating with climbing step at the drawbar and a hand grip on the front wall * Rear wall – made from HBW 400 steel – swinging with automatic 2-claw lock * 5 mm steel floor made of HBW 450 steel * 4 recessed and foldable 3 t lashing rings per side, integrated into the steel floor * Reinforced and certified body according to EN 12642 XL, including load securing certificate up to 19 t * Tipping platform and side walls painted in RAL 9010 pure white * Tailboard painted in RAL 9010 pure white * Sidewalls painting in any RAL color available at extra charge * Chassis painted in RAL 9011 graphite black * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Immediately available from Egestorf

Condition: used, axle configuration: 2 axles, first registration: 02/1992, Year of construction: 1992, Equipment: ABS, Empty weight: 3.140 kg Bwodpoxt Sd Sjfx Ahyek Carrying capacity: 14.860 kg GVW: 18.000 kg Selling price: € 1.500, US$ 1.733 Purchase on credit is possible: Yes

Condition: new, maximum load weight: 13,490 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, TRA-Kombi 18.0: 3 in 1 = Suitable for roll-off, skip containers and as a low-loader ----Brakes: * EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10.5-ton axles ----Suspension: * Air suspension with manual lowering function at the rear ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment ----Electrics / Lighting: * TPMS (tire pressure monitoring system), visualisation in the truck via EBS signal (no installation required on the truck side) * LED rear lights 12 / 24 V * 15-pin power connector ----General Attachments: * Toolbox made of powder-coated sheet steel * Spare wheel holder in basket design, mounted right side * Enclosed side underrun protection * Plastic quarter mudguards with spray protection * Rear plastic bumper guards Bsdpfx Ael Tld Iohyswk * Foldable rear A-plate ----Loading Area: * Hot-dip galvanized main frame with raised outer frame to guide roll-off containers * Steel sheet floor with roller recesses in the bogie area * For roll-off container transport, suitable for container lengths of 5,500 - 7,000 mm * Pneumatic 4-point locking clamps and mechanical plug-in stops at the front along the guideway * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 movable skip guides for lateral centering, front 4 skip guides are plug-in type with swing-out stops * Weld beads as anti-slip coating in the ramp area * Mechanical drop-down supports at the rear ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching securing elements to safely secure the skips, 4 lashing brackets each side in clover-leaf design * 1 pair of 13.4 t UVV lashing rings at the front * 4 x 8 t recessed lashing eyes on each side in the outer frame ----Ramps: * Aluminium approach ramps (10.6 t / pair) 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment at the rear) ----Paintwork: * Reflective contour tape on sides and rear * Hot-dip galvanized frame * Axles and drawbar painted black ----Information: * Load securing certificates according to DIN 30722-1 * Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * --Permissible gross weight of 20,000 kg technically possible-- * New vehicle without initial registration, with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egstorf