Used Müller-Mitteltal Car Transport Trailers for sale (242)

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2025, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders Fpodpsl Thxdjfx Afmsp * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalization at the rear * Side underrun protection * Swing-type support legs at the rear of the chassis frame * Mechanically adjustable warning board sets at front and rear * Front axle: enclosed plastic mudguards; rear axle: straight, galvanized steel skirts, each with splash guards * Side and rear contour markings, reflective * Folding lid (hot-dip galvanized) for toolbox on the turntable platform * Multi-voltage system * LED rear lights * Removable rotating beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via traction spring and turnbuckle * 15-pin electrical connector * 4 stake pockets per side (stakes not included), each with lashing points * Load securing package including: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform, 5 pairs of UVV swivel and retractable lashing rings, loadable in all directions and recessed into the outer frame – 13.4 t in the corners, otherwise 10 t each * 6 pairs of mechanical folding outriggers for 3 m total width (not present at the rear slope) * Widening planks stored in the center of the loading area * Excavator stick trough from rear axle to end crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the trough) * Hydraulically operated one-piece loading ramps (approx. 3,000 x 720 mm), adjustable laterally * Loading area over the slewing ring: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, drawbar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * 5,900 kg unladen weight * --Gross vehicle weight of up to 30,000 kg technically possible-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to prior sale and errors * Available from calendar week 38/2025

Condition: used, empty load weight: 3,450 kg, maximum load weight: 14,550 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2010, next inspection (TÜV): 07/2025, suspension: air, tire size: 235/75R17.5, color: yellow, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, turntable trailer, air suspension, ABS (anti-lock braking system), container lock, underride protection, side aluminum side guard, twin tires. Body: 2-axle outside-roller trailer for roll-off containers from 5.5 m to 7 m or 2 x 10 m³ skip containers; BPW axles, drum brakes, pneumatic locking, pneumatic drawbar lowering. ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted! Fjdjxgilmopfx Afmspp

Condition: used, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 01/2014, loading space volume: 10 m³, total width: 2,500 mm, total height: 4,000 mm, Equipment: ABS, For any questions about the vehicle, please contact Mr. Seidel (tel. ). ----MÜLLER MITTELTAL SF32BM/BT Concrete Mixer Trailer---- * Body: Liebherr HTM 1004 10m³ * BPW axles * Drum brakes * Spring brakes * Wabco ABS * Liftable 1st axle * Air suspension * Gross vehicle weight: 32,000kg * Unladen weight: 6,510kg * Payload: 25,490kg * Tire tread: 1st axle 14-15mm, 2nd axle 10mm We can provide you with a leasing or financing offer upon request. Mr. Seidel (tel. ) will be happy to assist you. Fpedpfx Afjwipfnjmop Further information can be found on our website. !!! Errors, changes, and prior sale reserved!!!

Condition: used, empty load weight: 3,280 kg, maximum load weight: 14,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 09/2013, suspension: air, tire size: 265/70 R19,5, wheelbase: 5,030 mm, Equipment: ABS, | Müller-Mitteltal roll-off trailer | Toolbox | Galvanized | Tires: 265/70R19.5 | Disc brake BPW | TÜV valid until | Errors, input and advance sales reserved. Fsdpfxewd Sdco Afmopp

Condition: new, maximum load weight: 11,000 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 1,000 mm, Year of construction: 2025, Equipment: ABS, tail-lift, * Müller-Mitteltal KA-TA-R 14.4 Tandem Low Loader Three-Way Tipper Trailer with Ramps - NEW VEHICLE * Immediately available in RAL 9016 traffic white * Leasing, financing, and trade-in for your old trailer possible * Reference number for inquiries: 11563 * Remote data transmission with display capability in the truck via EBS signal * Side marker lights with indicator activation * EBS brake system 2S/2M * Gross weight: 14.4t, Payload approx. 11t. * Galvanized floor * 5m x 2.42m x 0.5m + 0.5m steel extensions, 3 sides swinging and foldable, painted, side walls laser-welded * Lockable compartment under the tipping body for loading ramps * 1 pair of aluminium loading ramps 8t/pair, 3.57m, included * Chassis hot-dip galvanized, front wall hot-dip galvanized * 4 UVV lashing rings LC 5000daN at front and rear + 8 flush-mounted and foldable lashing eyes LC 3000daN in the tipper floor (aligned) * Hardwood excavator bucket rest * Two-step ascent in front of the front wall (hot-dip galvanized) * Drawbar stepless height-adjustable, hot-dip galvanized, 40mm towing eye * Wide tires 385/55R 19.5 (4x), parabolic springs * Mesh hooks, screwed-on rear stanchions, hot-dip galvanized * Tensioning cables for the rear side wall * Plastic toolbox on the right side of the chassis frame * LED lighting system 12 + 24 Volt * 2 LED reversing lights at the rear of the trailer Fedpjxdp U Asfx Afmepp * Hire purchase price: * e.g. €579 for 60 months with no down payment and no final installment. An offer from our financing partner "FM LeasingPartner". Other contract terms with/without final payment or down payment possible. * Request an offer from us! * We are a Müller-Mitteltal authorised dealer ----Our opening hours Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside these hours, we are available by appointment. We speak German, English, Polish and French. WhatsApp / Facetime

Condition: used, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 02/2021, next inspection (TÜV): 08/2026, loading space length: 4,800 mm, loading space width: 2,430 mm, loading space height: 500 mm, Equipment: ABS, Müller-Mitteltal low-loader tipper - Low-loader and two-way tipper combined in a single vehicle - 40 mm towing eye - Air brake system - Support legs for loading and unloading - Gigant axles - Tyres: 235/75 R 17.5 - Drum brakes - Unladen weight: 3,620 kg - Height-adjustable drawbar - TÜV due: 08.2026 Fpedpfx Aexc Sv Hofmsp - Safety inspection (SP) due: 02.2026 - Loading area length: 4,800 mm - Loading area width: 2,430 mm - Side wall height: 0.5 m Errors and prior sale excepted. Internal vehicle number: 11349.

Condition: new, maximum load weight: 10,900 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: * Tire pressure monitoring system (RDÜ) * Electronic braking system (EBS) * Emergency release device for spring brake cylinders * LED lighting * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with equalizer assembly * Drawbar height adjustable by approx. 300 mm * Drawbar extension by 250 mm to 2,250 mm * Jost landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox mounted front right, outside on the bulkhead * Side underrun protection * Plastic quarter mudguards * Hot-dip galvanized chassis and drawbar * Bulkhead * Rear wall * Tailgate and loading ramps * 50 mm softwood floor * Preparation in front of the bulkhead for retrofitting container locks * Bolted bulkhead from smooth sheet metal Fpedpexglibsfx Afmep * Side walls made from trapezoidal profiled steel sheet, foldable, with drop-side lifting assistance * Steel rear wall, can be inserted between ramps (storage bracket for when not in use inside at the front bulkhead) * Bolted rear posts * Perforated external frame, approx. 45° angled, with 2 t lashing capacity every 480 mm, installation of 3 t folding lashing rings every 600 mm possible, 1 x 6.3 t lashing ring in each front and rear corner, various bores for 1.2 t lashing options in front and rear cross members * One-piece mechanical mesh loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm) * Rear approach angle approx. 860 mm * --Enhanced and certified body according to EN 12642 XL including load securing certificate-- * Drop-side color in RAL 2011 deep orange * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from KW 46 / 2025 * Sample images

Condition: used, empty load weight: 4,120 kg, maximum load weight: 13,880 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2016, next inspection (TÜV): 02/2026, loading space length: 5,000 mm, loading space width: 2,360 mm, loading space height: 900 mm, loading space volume: 10 m³, suspension: air, tire size: 385/65R22.5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, BPW axles, tandem, air suspension, ABS (anti-lock braking system), underrun protection, front support, pendulum tailgates. Superstructure: Tandem tipping trailer with aluminium drop sides, approx. 10m³, 2x 9t BPW axles, drum brakes! Loading height approx. 1510mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, intermediate sale and errors excepted! Fedsxfli Espfx Afmopp

Condition: new, maximum load weight: 8,770 kg, Year of construction: 2025, ABS Müller Mitteltal ETÜ TA R 11.9 Tandem Low Loader with many extras Fpjdpfoxcxmfex Afmop Equipment includes: - 2 spring-assisted lifting devices for 400 mm high steel side walls - Reinforced and certified construction according to EN 12642 XL load securing certificate - 10 UVV lashing rings integrated into the existing external frame hole pattern - Additional wooden floor in clamped design - Tyres: 235/75R17.5 - Four BPW axles instead of GIGANT - Platform extension by 870 mm, total length 6,270 mm - One-piece ramps with hot-dip galvanized anti-slip grating - Lockable toolbox with 45 kg payload capacity Paintwork: - Wheels: silver - Chassis/front wall/drawbar/rear wall/stanchions/ramps: hot-dip galvanized - Axles/springs: black - Side walls: RAL2011 deep orange We are happy to offer you suitable financing, hire purchase or leasing options. Delivery or shipping by arrangement. We always have a selection of new machines in stock, as well as demonstration units. Contact us today! We rent vehicles and machines with or without operator. A wide range of used machines and equipment always available. Technical changes, errors and prior sale excepted.

Condition: used, maximum load weight: 22,000 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 11/2008, Equipment: ABS, Vehicle identification number: WMM0000080052540 STRAIGHT LOADING AREA Container locking Own weight: 8,000 kg DE HU: due Gigant axles with drum brakes Air suspension Platform dimensions: 9,400 mm - Loading height: 880 mm - Dimensions see picture no. 4 Can be extended to 3,000 mm with lighting Drawbar - 50 mm Hydraulic ramps, divided - Length 2,600 + 1,600 mm - Width 650 mm Support Fpedpfxjtuhv Rs Afmep Tires: 235/75 R 17.5 Changes, prior sale and errors are expressly reserved. The description serves to generally identify the vehicle and does not constitute a guarantee in the sense of sales law. The description in the purchase contract is decisive. Our offer is generally without a new TÜV approval. If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops! The vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply.

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/1999, loading space length: 4,990 mm, loading space width: 2,330 mm, loading space height: 870 mm, loading space volume: 10 m³, Equipment: ABS, 3-way tipper body, 880 mm steel side walls, height-adjustable drawbar, 50 mm towing eye, Jost support winch, ABS, BPW Eco axle(s), drum brake system, air suspension, reversing lights. Vehicle may be covered with advertising decals and/or lettering. Our offer generally excludes a new TÜV inspection. If a new TÜV inspection is required, we would be happy to provide you with an offer from our partner workshops! Vehicle may be covered with advertising decals and/or lettering. Our general delivery and payment terms apply. We are pleased to offer you financing or leasing plans for this item. Fpjdpfxew Ndqqo Afmop Please contact us!

Condition: used, maximum load weight: 34,400 kg, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 04/2009, next inspection (TÜV): 07/2024, Equipment: ABS, Further questions via WhatsApp Fpodpfxet E Eune Afmjp

Condition: new, maximum load weight: 10,900 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: * RDÜ (Tire Pressure Monitoring System) * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders * LED lighting * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with compensation aggregate * Drawbar height adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox on the front right side of the bulkhead * Side underrun protection * Plastic quarter mudguards Fedpfxoq Dyvvj Afmspp * Hot-dip galvanized chassis and drawbar * Bulkhead * Rear wall * Tailgate and loading ramps * 50 mm softwood floor * Pre-equipment in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Sidewalls made of trapezoidal profiled steel sheet, hinged with drop-side spring assist * Steel rear wall retractable between ramps – bracket for storage inside at the bulkhead when not in use * Bolted rear stanchions * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm; installation of 3 t lashing rings every 600 mm possible; in each corner (front and rear) one 6.3 t lashing ring; various holes in the front bulkhead and rear cross member for 1.2 t lashing options * One-piece mechanical grating ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (retractable down to 20 mm) * Rear approach angle approx. 860 mm * --Reinforced and certified body according to EN 12642 XL incl. load securing certificate-- * Drop-side color in RAL 9010 pure white * Side wall painting available in any RAL color for an additional charge * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available from Egestorf

Condition: new, maximum load weight: 10,900 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: * RDÜ (Tire Pressure Monitoring System) * Electronic Braking System (EBS) * Emergency release device for spring-loaded cylinders * LED lighting * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with equalizing unit * Drawbar adjustable in height by approx. 300 mm * Drawbar extension by 250 mm to 2,250 mm * Jost landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox on the front right-hand side of the bulkhead * Side underrun protection * Plastic quarter mudguards * Hot-dip galvanized chassis and drawbar Fjdexglh Ropfx Afmepp * Front wall * Rear wall * Tailgate and loading ramps * 50 mm softwood floor * Mounting bracket for subsequent installation of container locks positioned in front of the bulkhead * Bolted smooth plate bulkhead * Side walls made of trapezoidal steel sheet, foldable with drop side spring assist * Steel rear wall, can be slid in between the ramps - bracket for storage inside in front of the bulkhead when not in use * Bolted rear stakes * Perforated outer frame, angled at approx. 45 degrees with 2 t lashing capacity every 480 mm, option to install 3 t folding lashing rings every 600 mm, each front and rear corner with one 6.3 t lashing ring, various holes in the front and end crossmember for 1.2 t lashing points * One-piece mechanical grating loading ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear access angle approx. 860 mm * --Reinforced and certified superstructure according to EN 12642 XL incl. load securing certificate-- * Drop side color in RAL 2011 deep orange * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from CW 46 / 2025 * Sample images

Condition: new, maximum load weight: 10,900 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: * RDÜ (Tire Pressure Monitoring System) * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders * LED lighting * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with equalizing unit * Height-adjustable drawbar, adjustable by approx. 300 mm * Drawbar extension by 250 mm to 2,250 mm * Jost landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox mounted on the front right exterior of the bulkhead * Side underrun protection * Plastic quarter fenders * Hot-dip galvanized chassis and drawbar * Front wall * Rear wall * Tailgate and loading ramps Fpjdsrvvflspfx Afmep * 50 mm softwood floor * Provision for retrofitting container locks in front of the bulkhead * Bolted smooth sheet steel front wall * Side walls made from trapezoidal-profiled steel, foldable with drop-side spring assist * Insertable steel rear wall between the ramps; holder for stowage in front of the bulkhead when not in use * Bolted rear stanchions * Perforated outer frame angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm; possible installation of 3 t drop lashing rings every 600 mm; in each corner, front and rear, 1 x 6.3 t lashing ring; various holes in the front and end cross members for 1.2 t lashing options * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear entry ramp approx. 860 mm * --Reinforced and certified body according to EN 12642 XL including load securing certificate-- * Drop side color in RAL 9010 pure white * Painting of side walls in any RAL color available at extra cost * New vehicle with manufacturer’s warranty * Errors and intermediate sale subject to change * Immediately available from Egestorf

Condition: new, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA 18.0: * 2 in 1 = suitable for roll-off containers and as a low-loader * RDÜ (Tire Pressure Monitoring System) * EBS electronic braking system * Emergency release for spring brake cylinders * Drum brakes * 2 x 10 ton axles * Air suspension with manual lowering at the rear * Drawbar 2,000 mm long with 40 mm towing eye and adjustable height mechanism * Tool box made of powder-coated steel sheet approx. 1,000 x 300 x 600 mm, as well as a spare wheel holder in basket design on the right side * Reflective contour tape on sides and rear * Side underrun protection * Plastic quarter mudguards with spray protection * Rear plastic buffer guards * Foldable "A" sign at rear Fpjdpfx Afol Tq Nmomsp * LED tail lights * 15-pin electrical connector * Main frame with raised outer rails for guiding roll containers * Steel floor with roller recesses in the turntable area * Container length possible from 5,500 to 7,000 mm * Pneumatic 4-point locking clamp, plus mechanical plug-in stop angles at the front in the running track, load securing certificate according to DIN 30722-1 * Lashing package consisting of: 1 pair of 10 t UVV lashing rings at the front on the front wall beam, 3 pairs of 10 t UVV lashing rings on the side in the outer frame, 4 x 2 t clover-shaped lashing eyes per side, and 4 x 8 t recessed lashing shackles in the outer frame * Weld bead as anti-slip coating in the ramp area of the running path * Mechanical drop-down support legs at the rear * 1 pair of aluminum approach ramps (10.6 t / pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear) * Chassis, turntable, locking parts, and rear drop-down supports are hot-dip galvanized * Drawbar, axles, and air reservoir painted in a shade of black * New vehicle without initial registration, full manufacturer's warranty * Errors and prior sale excepted * Available from CW 05/2026

Condition: new, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA 18.0: * 2-in-1: suitable for roll-off containers and as low-loader * TPMS (Tire Pressure Monitoring System) * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 10-ton axles * Air suspension with manual lowering at the rear * Drawbar 2,000 mm long with 40 mm towing eye and adjustable height * Tool box made of powder-coated steel sheet approx. 1,000 x 300 x 600 mm and spare wheel holder in basket design on the right side * Contour marking tape, reflective on sides & rear * Side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear bumper pads * Foldable A-board at the rear * LED tail lights * 15-pin electrical connector * Main frame with raised outer frame for guiding roll-off containers * Steel floor plate with roller recesses in the bogie area * Container length from 5,500 to 7,000 mm possible * Pneumatic 4-point locking system and mechanical locking angles at the front in the guide rail, load securing certificate according to DIN 30722-1 * Lashing package including: 1 pair of 10 t. UVV lashing rings at the front wall carrier and 3 pairs of 10 t. UVV lashing rings on the side outer frame, each side with 4 x 2 t. cloverleaf type lashing eyes and 4 x 8 t. lashing lugs recessed into the outer frame * Welded seam as anti-slip surface in the ramp area * Mechanical drop-down supports at the rear Fpsdpfxsl Tpc As Afmop * 1 pair aluminum approach ramps (10.6 t/pair) 2,800 x 470 mm suitable for rubber-tyred and tracked vehicles (lockable storage compartment accessible from the rear) * Chassis, bogie, locking components, and rear drop-down supports hot-dip galvanized * Drawbar, axles, and air tanks finished in black * New vehicle without initial registration, full manufacturer warranty * Subject to errors and prior sale * Available from calendar week 05 / 2026

Condition: new, maximum load weight: 8,410 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2025, * Wabco EBS (electronic braking system) * Emergency release device for spring-loaded brake cylinders * Drum brakes * 2 x 5.5 t BPW axles * Parabolic springs with tandem equalizing unit * Tire pressure monitoring with display option in the truck via EBS signal - no truck-side installation required * Height-adjustable drawbar (approx. 300 mm) with 40 mm flange towing eye * Mechanical BPW support winch at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted front right side of the chassis * 15-pin electrical plug * LED lighting system 12 / 24 V Fjdpfxsxf Sk Nj Afmopp * 2 LED reversing lights at the rear (activated via reverse gear) * Bolt-on underrun protection * Plastic quarter mudguards * Lashing hooks in each of the central locking bearings and 2 units on the front wall * Chassis made of fine-grain steel * Two-step access ladder in front of the front wall on the left * 3-way steel drop-side tipper body with reinforced 600 mm "Strong" sideboards * Continuous upper sideboards with internal tube reinforcement (fold-down, no intermediate stakes) including board spring lift * Bolt-on rear stakes * Combined steel swing doors as two-wing, asymmetrically split rear wall, can be opened and locked at 270° (not fold-down), with additional pivot frame for automatic rear wall opening during tipping * Rear locking via galvanized rotary locking rod and central locking * Deactivation function for automatic rear wall operation when tipping backwards with opened swing door * Each corner features 1 x 5 t lashing ring, plus 4 x 3 t lashing rings built into the outer frame on each side * 4 mm floor plate made of S 420 MC 4 fine-grain steel * Rear mounting rails for loading ramps * Reinforced body with cargo securing certificate according to EN 12642 XL * 1 pair of aluminum loading ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles, lockable storage compartment under the loading area, integrated into the chassis at the rear * Chassis, drawbar, tipping body, front wall, underrun protection, rear stake, rear folding supports, and entry steps hot-dip galvanized * Side walls and tailgate painted in RAL 3003 ruby red * Axles, springs, air tanks, and support winch coated in a black tone * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egestorf

Condition: new, maximum load weight: 8,410 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2025, * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 5.5 t BPW axles * Parabolic springs with tandem equalizer assembly Fodpfoxf Sk Ajx Afmspp * Tire pressure monitoring with in-cab display via EBS signal—no truck-side installation required * Height-adjustable drawbar (adjustment range 300 mm) with 40 mm flange draw eye * Mechanical BPW landing gear at the front * 2 mechanical folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted front right on chassis * 15-pin power connector * LED lighting system 12 / 24 V * 2 LED reversing lights at the rear—activated via reverse gear * Bolt-on underrun protection * Plastic quarter mudguards * Lashing hooks at central locking mounts and 2 on the front wall * Chassis made of fine-grain steel * Two-step access ladder in front of bulkhead on driver's side * Steel pallet 3-way tipper body with reinforced 600 mm "Strong" drop sides * Continuous upper sidewalls with internal tube reinforcement—no centre stanchions—foldable with drop side spring assist * Rear stanchions bolted * Combination steel double rear doors, asymmetrically split, 270° swing and lockable—not foldable—plus additional swing frame for automatic tail opening during tipping * Locking via galvanized rotary bolt latch at rear and central locking * Deactivation function for automatic tailgate operation when tipping rearwards with doors open * Lashing points: 1 x 5 t in each corner, 4 x 3 t on each side sunk into the external frame * 4 mm floor plate made of S 420 MC 4 fine-grained steel * Rear mounting rail for loading ramps * Reinforced body with load securing certificate to EN 12642 XL * 1 pair aluminium loading ramps approx. 3,310 x 400 x 105 mm (8 t/pair load capacity) suitable for rubber-tyred and tracked vehicles, lockable storage compartment under the platform at the rear of the chassis * Chassis, drawbar, tipping platform, bulkhead, underrun protection, rear stanchions, rear folding supports, and entry step hot-dip galvanized * Sidewalls and tailgate painted RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in a shade of black * New vehicle with manufacturer warranty * Subject to prior sale and errors excepted * Immediately available from Egestorf

Condition: new, maximum load weight: 8,410 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2025, * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 5.5 t BPW axles * Parabolic springs with tandem compensation unit * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required * Height-adjustable drawbar (up to 300 mm) with a 40 mm flange draw eye * Mechanical BPW landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, fitted front right on the chassis * 15-pin electrical connector * LED lighting system 12 / 24 V Fpodpfoxf Skvsx Afmsp * 2 LED reversing lights at the rear (activated via reverse gear) * Bolt-on underride protection * Plastic quarter mudguards * Lashing hooks at the positions of the central locking system and 2 pieces at the front wall * Chassis made of high-strength fine-grain steel * Two-step access ladder front left of the bulkhead * Steel pallet 3-way tipper body with reinforced 600 mm "Strong" side walls * Continuous upper side walls with internal tube reinforcement – without center vertical stanchions – foldable with sidewall spring lift * Rear stanchions bolted * Combination steel swing doors at the rear, 2-wing, asymmetrically split, pivotable and lockable up to 270°, non-foldable, with additional pendulum frame for automatic tailgate opening during tipping * Locking by galvanized rotary bar lock at the rear and central locking * Deactivation function for automatic tailgate operation when tipping backwards with open swing door * Each corner with one 5 t lashing ring and each side with four 3 t lashing eyes recessed in the outer frame * 4 mm floor plate made of S420 MC 4 fine-grain steel * Rear mounting rails for drive-on ramps * Body (reinforced) with load securing certificate to EN 12642 XL * 1 pair aluminum drive-on ramps approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair) suitable for rubber-tired and tracked vehicles, lockable storage compartment under the loading area at the rear, integrated into the chassis * Chassis, drawbar, tipper platform, bulkhead, underride protection, rear stanchion, rear folding supports as well as access steps hot-dip galvanized * Side walls and tailgate painted RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in black * New vehicle with manufacturer’s warranty * Subject to prior sale and errors * Immediately available from Egestorf

Condition: new, maximum load weight: 8,410 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2025, * Wabco EBS (electronic braking system) * Emergency release device for spring-loaded brake cylinders * Drum brakes * 2 x 5.5 t BPW axles * Parabolic suspension with tandem equalizer unit * Tire pressure monitoring with in-cab display via EBS signal - no vehicle-side installation required * Height-adjustable drawbar (approx. 300 mm) with 40 mm flange towing eye * Mechanical BPW support winch at the front * Two mechanical folding support legs at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted front right on chassis * 15-pin electrical connector * LED lighting system 12/24 V * Two LED reversing lights at the rear - activated via reverse gear * Bolt-on underrun protection * Plastic quarter mudguards * Lashing hooks in the central locking mounts and two at the front bulkhead Fpedpfx Aexf Skpefmop * Chassis made of high-strength fine-grained steel * Two-step access in front of the bulkhead on the left (FR) * Steel pallet three-way tipper body with reinforced 600 mm Strong side walls * Full-length side walls with upper internal tube reinforcement -foldable without central stanchions- assisted by side panel coil springs * Bolt-on rear stanchions * Combination steel wing doors at rear, asymmetrically split, 2-leaf, swiveling 270° and lockable - not foldable - with additional pendulum frame for automatic tailgate opening during tipping operation * Locking via galvanized rotary bar lock at the rear and central locking system * Deactivation function for automatic tailgate operation when reversing with opened wing door * Each corner fitted with 1 x 5 t lashing ring and 4 x 3 t lashing rings recessed into outer frame on each side * 4 mm floor plate made from S 420 MC 4 high-strength fine-grained steel * Rear mounting rail for loading ramps * Reinforced body with load securing certificate according to EN 12642 XL * 1 pair of aluminum loading ramps, approx. 3,310 x 400 x 105 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles, lockable storage compartment beneath the load area inserted in the chassis at the rear * Chassis, drawbar, tipper body, bulkhead, underrun protection, rear stanchion, rear folding supports, and access step hot-dip galvanized * Side panels and tailgate painted RAL 3003 ruby red * Axles, suspension, air tanks and landing gear painted in a shade of black * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Condition: new, maximum load weight: 12,260 kg, overall weight: 14,400 kg, axle configuration: 2 axles, Year of construction: 2026, * TM-TA 14.4: * Wabco EBS (Electronic Braking System) * RDÜ Tire Monitoring System * Emergency Release Device for Spring Brake Cylinders * Drum Brakes * 2 x 7 ton Gigant Axles * Parabolic Springs with Equalizing Unit * Jost Landing Gear at the front, 2 x externally mounted drop-down supports at the rear * Height-adjustable (±150 mm) hot-dip galvanized drawbar * Hot-dip galvanized chassis Fsdpfxjl Thyqj Afmjpp * 15-pin power connector * LED rear lights * Enclosed single plastic mudguards * Foldable A-panel at the rear * Plastic impact protection buffers on underride guard * Hot-dip galvanized underrun protection with integrated chain storage box (W = 370 mm x D = 420 mm x H = 480 mm) front left & right * 2 repositionable container stops for lateral centering of containers * Front container stops with pivoting stop, insertable in 4 positions * On each side, 2 x 5.3 t UVV lashing rings for attaching tensioning elements * Axles, springs, air tanks, and landing gear painted in black * Errors and prior sale excepted * New vehicle with manufacturer's warranty * Available from calendar week 05 / 2026

Condition: new, maximum load weight: 12,260 kg, overall weight: 14,400 kg, axle configuration: 2 axles, Year of construction: 2026, * TM-TA 14.4: * incl. 2 ratchet tensioners permanently mounted on the outer frame with chain box * eyes on both sides and quick-shortener in Y-special design, 6.3 t * Tensioning force with load securing certificate * Wabco EBS * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with compensating unit * Jost landing gear at the front * 2 external drop-down support legs at the rear * Height-adjustable hot-dip galvanized drawbar +/- 150 mm * Hot-dip galvanized chassis * 15-pin power connector * LED tail lights * Closed, single plastic mudguards * Foldable A-sign at the rear * Plastic collision protection buffer on the underrun protection * Hot-dip galvanized underrun protection with integrated chain storage box, W = 370 mm x D = 420 mm x H = 480 mm, front left & right Fpsdpfx Aspk Dyxjfmsp * 2 repositionable skip stops for lateral centering of skips * Skip stops at the front, can be inserted in 4 positions with pendulum-stop feature * On each side, 2 x 5.3 t UVV lashing rings for attaching tensioning elements * Axles, springs, air tanks and landing gear painted in black tone * Subject to errors and prior sale * New vehicle with manufacturer warranty * Available from c/w (calendar week) *

Condition: new, maximum load weight: 10,360 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-ER 14.4: * RDÜ (Tire Pressure Monitoring System with in-cab display via EBS signal, no truck-side installation required) * Electronic Braking System (EBS) * Emergency release system for spring brake cylinders * Drum brakes * Gigant axles * Air suspension with lift and lowering function Fpsdendpn Sspfx Afmsp * Drawbar height adjustable by 300 mm * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox, front right, mounted externally on front wall * Side underride protection * Plastic quarter mudguards * LED lighting system * 15-pin power connector * Hot-dip galvanized chassis, drawbar, front and rear wall * 50 mm softwood floor * Provisions for retrofitting 20" container locks at the front and rear * Bolted smooth sheet steel front wall * Side walls made of trapezoidal-profiled steel sheet, foldable with drop-side spring assist * Bolted, hot-dip galvanized rear stanchions * Perforated outer frame approx. 45° bent, with 2 t lashing points every 480 mm, possibility to install 3 t fold-down lashing rings every 600 mm; each front and rear corner with 1 x 6.3 t lashing ring; various holes for 1.2 t lashing points in the front and rear crossmembers * 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles, storage compartment recessed under the loading area within the chassis at the rear * Vehicle hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to error and prior sale * Immediately available from Egestorf

Condition: new, maximum load weight: 8,600 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2025, * KA-TA-R 11.9 Masterline: * Floor and front wall hot-dip galvanized * Wabco EBS * Emergency release device for spring brake cylinders * RDÜ tire pressure monitoring system * Drum brakes * 2 x 5.5 t BPW axles * Parabolic springs with tandem equalizer unit * 300 mm height-adjustable hot-dip galvanized drawbar with 40 mm flange towing eye * Jost mechanical landing gear at front * Rear: 2 mechanical, hot-dip galvanized folding supports * Galvanized steel toolbox mounted on right side * 15-pole electrical connector * Bolted underrun protection * LED lighting * Plastic quarter mudguards * Net hooks on the sides and rear in the locks of the central locking system, plus 3 on the outside of the front wall * Hot-dip galvanized chassis * Steel pallet 3-way tipper body * Continuous drop-down side walls without central stanchion, with drop-side lifting assistance * Drop-down rear tailgate, can also be used as pendulum tailgate via manual central locking * Hot-dip galvanized, bolted rear stanchion * In each corner: 1 x 5 t recessed, foldable lashing ring; plus 4 x 3 t recessed, foldable lashing rings on each side frame * 4 mm steel plate flooring * Rear mounting rail for loading ramps Fpedpfx Afov Dz N Aemop * Body reinforced with load-securing certificate according to EN 12642 XL * 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Rear lockable storage compartment recessed in chassis under loading platform * Tires: 235/75 R 17.5 * Axles, springs, air tanks, drawbar, and landing gear painted in black * Drop-side paint finish in RAL 9010 pure white * Side wall painting in a custom RAL color available at extra charge * New vehicle with manufacturer's warranty * Errors and prior sale reserved * Available from calendar week 49/2025