Used Müller-Mitteltal Car Transport Trailers for sale (250)

Condition: used, maximum load weight: 14,300 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 07/2023, next inspection (TÜV): 11/2026, Year of construction: 2023, * HL - TA 20.0 ----Brakes: * Wabco EBS-E braking system * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake coupling ----Axle: * 2 x t SAF axles * 1st axle as lift axle (fully automatic) * Lift axle with +30 mm driving height via adjustment cylinder * Starting aid for shunting and forced lowering onto the first axle - controlled via speed-dependent EBS electronics - (no installation required on the truck side, additionally with cable for operation from the tractor) ----Air suspension: * Air suspension with lowering function via remote control ----Drawbar / Flange Towing Eye: * 50 mm flange-type adjustable towing eye - height adjustable by +77 mm and -33 mm - for 2 t support load ----Electrics / Lighting: * 15-pin power plug * 3-pin 12V auxiliary plug * LED lighting system 12 / 24V * 2 LED reversing lights operated via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connection cables for agricultural and forestry vehicles * Power supply for remote control 12+24 V via taillight ----General Attachments: * BPW landing gear at the front * Mechanically extendable underrun protection for container lengths over 6,000 mm Hnsdpfxsx Dp Agj Aaask * Speedline diamond aluminum rims * Pin-type tow coupling (use only when underrun protection is retracted) * Enclosed plastic half-shell single wheel mudguards * Two-step access ahead of the front wall on the left-hand side * Shovel and broom holder ahead of the front wall * 2 stainless steel toolboxes (matte finish), approx. 650 x 350 x 320 mm, right side * Enclosed side underrun protection usable as advertising surface ----Hydraulics: * 2-circuit hydraulic connectors (engine side from truck/tractor), rated for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted right front) operated via remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (Serial No. 100746129, year 2023) * Base frame made of high-strength fine-grain steel * 20,000 kg pulling force * Hook height 1,570 mm * Hooklift operation via remote control * Remote with fast feed for unloading, but not for lifting * Emergency stop switches on left and right sides * Container support with four side supports and one roller at the rear on each side * Hydraulic rear interior locking * 2 additional hydraulic cylinders to assist main boom lifting * 2 x mechanical drop-down supports at the rear * Approval for 20 t gross weight (2 x 9 t axles) and 2 t support load * Note: If the remote control is outside the charging cradle, the service brake must be applied to activate the remote. Brake connections must remain connected at all times to open the hydraulic/pneumatic control valves * Monitoring system for underrun protection ensuring it is retracted during tipping ----Loading Height: * Unladen: approx. 1,300 mm with lowered lift axle ----Coating: * Chassis, drawbar, access steps, underrun protection, and drop-down supports hot-dip galvanized * Axles, air tanks, front landing gear painted black * Palfinger hooklift painted black/yellow ----Information: * Errors and prior sale excepted * Vehicle is in very good / as-new condition ----Delivery Time: * Vehicle is immediately available

Condition: used, maximum load weight: 14,300 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 07/2023, next inspection (TÜV): 11/2026, Year of construction: 2023, * HL - TA 20.0 Hnjdpsx Dp Amofx Aaajk ----Braking System: * Wabco EBS-E braking system * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake connector ----Axle: * 2 x SAF axles (capacity per axle not specified) * 1st axle as lift axle (fully automatic) * Lift axle with driving height +30 mm via adjustment cylinder * Start-up aid for maneuvering and forced lowering on the first axle (controlled by speed-dependent EBS electronics; operated without installation on the truck side; includes additional cable for control from the tractor) ----Air Suspension: * Air suspension with lowering function via remote control ----Drawbar / Flange Towing Eye: * 50 mm flange-mounted towing eye - height-adjustable by +77 mm and -33 mm - for 2 t vertical load ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary socket * LED lighting system 12 / 24V * 2 LED reversing lights switched via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connection cables for agricultural and forestry vehicles * Power supply for radio 12+24V via tail light ----General Attachments: * BPW support windlass at front * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond-finish aluminum rims * Detachable pin-type tow coupling (use only when underrun protection is retracted) * Enclosed plastic half-shell individual mudguards * Two-step access in front of front bulkhead, left side * Shovel and broom holder in front of front bulkhead * 2 stainless steel toolboxes (matte), approx. 650 x 350 x 320 mm, right side * Closed lateral collision protection, usable as advertising surface ----Hydraulics: * Two-circuit hydraulic connections (engine side from truck/tractor), rated for 180 bar (for tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted on front right), operated via remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (Serial No. 100746129, year 2023) * Main frame made of high-strength fine-grained steel * 20,000 kg pulling force * Hook height 1,570 mm * Hooklift operated via remote control * Radio with quick function for tip-off, but not for winching * Emergency stop button on both left and right sides * Container rests with 4 lateral supports each side and 1 roller at the rear * Hydraulic rear internal locking * 2 additional hydraulic cylinders to assist the main arm lifting * 2 x mechanical tilt supports at rear * Approval for 20 t total weight (2 x 9 t axles) and 2 t vertical load * Note: If the remote control is outside the charging cradle, the service brake must be applied so that the radio function is released. The brake lines must remain permanently connected so the hydraulic/pneumatically controlled valves can be operated. * Monitoring system for underrun protection to ensure it is retracted when tipping ----Loading Height: * Unloaded approx. 1,300 mm with lift axle lowered ----Paintwork: * Chassis, drawbar, access steps, underrun protection, and tilt supports hot-dip galvanized * Axles, air tanks, front support windlass painted in black * Palfinger hooklift painted black/yellow ----Information: * Errors and prior sale reserved * Vehicle is in very good / like-new condition ----Container: Dimensions: * Loading length: 5,500 mm * Loading width: 2,300 mm * Loading height: 1,000 mm Information: * Mounting brackets for hook systems as per...

Condition: used, axle configuration: 2 axles, Year of construction: 2014, Equipment: ABS, For inquiries regarding the vehicle, Mr. Seidel will assist you (by phone). MÜLLER MITTELTAL SF32BM/BT Concrete Mixer Semi-Trailer Superstructure: Liebherr HTM 1004, 10m³, BPW axles, drum brakes, spring-actuated parking brake, Wabco ABS, 1st axle liftable, air suspension, permitted gross weight: 32,000 kg, unladen weight: 6,510 kg, payload: 25,490 kg, tire tread depth: 1st axle 14-15mm, 2nd axle 10mm Upon request, we can provide you with a leasing or financing offer. Mr. Seidel (phone) will be happy to assist you. For more information, please visit our website. ... Subject to errors, changes, and prior sale!!! = Further information = Hedsyfu Sdepfx Aaajnk GVW: 32,000 kg External dimensions: 0x2500x4000 Please contact Tobias Ebert for further details.

Condition: used, empty load weight: 4,500 kg, maximum load weight: 13,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 08/2015, next inspection (TÜV): 07/2025, loading space length: 4,800 mm, loading space width: 2,400 mm, loading space height: 1,000 mm, color: blue, Year of construction: 2015, gearing type: other, driver cabin: other, Equipment: ABS, * German trailer * Condition, see photos * Müller-Mitteltal 3-way tipper, type KA-TA-R 18.0 tandem * Tipper dimensions: 4,800 x 2,400 x 1,000 mm * Roll tarp * Air suspension * Disc brakes * Platform * Jost support leg * Payload 13,500 kg If a new TÜV inspection is required, we are happy to provide you with an offer from our partner workshops. Our offer generally does NOT include a new TÜV inspection, new DGUV, new SP, or new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure the buyer does not have any misconceptions regarding condition or suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. Hnsdpfx Aaowz H Nboask All information provided without guarantee. We are not liable for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and features of the goods/vehicles. Subject to alterations, prior sale, and errors.

Condition: used, maximum load weight: 12,080 kg, overall weight: 14,400 kg, axle configuration: 2 axles, first registration: 06/2024, loading space length: 3,900 mm, loading space width: 1,920 mm, loading space height: 415 mm, Year of construction: 2022, Equipment: ABS, * ETM-TA 14.4: ----Brakes: * Wabco ABS braking system * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Coupling Eye: * Height-adjustable drawbar (+/- 150 mm) * 40 mm bolted coupling eye ----General Attachments: * Jost support winch at the front * Side underride protection * Foldable A-sign at the rear ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----Body: * Fixed steel front and side walls * Removable steel rear wall * Floor made of 50 mm softwood * 1 sliding steel plate (750 x 1,000 mm) at the front incl. 2 removable trough stops at the front, insertable in 2 positions * Rear cross member designed for aluminum loading ramps incl. 2 additional drop supports at the rear ----Loading Edge: * Unloaded loading edge approx. 710 mm ----Load Securing: * 4 removable trough stops, can be inserted in 2 positions for lateral centering of troughs * Each side with 1 x (13.5 t) UVV lashing point for securing devices * 2 ratchet tensioners (spindle adjustment) with compensation chain and quick shortener (tension force 6,300 kg) ----Tyres: * Tyre size: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Paintwork: * Chassis, front wall, side walls, mudguards, drawbar, rear drop supports hot-dip galvanized * Axles, springs, support winch, air tank painted in black Hnedpfx Ael Th Eyoaask ----General Information: * Vehicle has a single-day registration in 06/2024, due to missing tire pressure monitoring system and has not been loaded/used * Subject to errors and prior sale ----Delivery Time: * Immediately available from Egestorf on the A7

Condition: used, maximum load weight: 10,870 kg, overall weight: 14,400 kg, axle configuration: 2 axles, first registration: 06/2025, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2023, Equipment: ABS, * KA-TA-R 14.4: * Wabco ABS * Emergency release device for spring-loaded cylinders Hnsdjl Th Htspfx Aaaok * Drum brakes * 2 x 7 ton Gigant axles * Parabolic springs with tandem equalizer unit * Drawbar height adjustable by approx. 300 mm with 40 mm flange towing eye * Jost mechanical landing gear at the front * Two mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm, mounted at the front on the right side of the chassis * 15-pin power connector * Multi-chamber tail lights * Bolt-on underride guard * Plastic quarter mudguards * Net hooks at each position of the central locking and 2 hooks on the front wall * Chassis made of fine-grain steel * Steel pallet 3-way tipping body, continuous side walls at the top with internal pipe reinforcement - without central stanchions, foldable with drop-side spring lifter * Rear stanchions bolted * Combo steel swing doors at the rear, 2-wing asymmetrically split, can be swiveled and locked to 270° - not foldable - with additional pendulum frame for automatic tailgate opening during tipping process, locking via galvanized rotary bar lock at the rear and central locking, deactivation function for automatic tailgate during reverse tipping with opened swing door * Each corner with 1 x 5 ton lashing point and 4 x 3 ton lashing rings recessed into the outer frame on each side * 4 mm steel sheet floor made of fine-grain steel * Rear mounting rail for loading ramps * Reinforced body with load securing certificate * 1 pair of aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 tons per pair) suitable for rubber-tired & tracked vehicles * Lockable storage compartment from the rear recessed under the loading area in the chassis for the ramps * Chassis, drawbar, underride guard, rear stanchion, rear folding supports hot-dip galvanized * Axles, springs, air tank and landing gear painted black * Tires 285/70 19.5 * Side walls painted in RAL 9010 pure white * Painting of the side walls in a different RAL color available at extra cost * Vehicle has a day registration (unused) * Errors and prior sale excepted * Immediately available from Egestorf

Condition: new, maximum load weight: 10,800 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: ----Braking System: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Drawbar / Flange drawbar eye: * Drawbar adjustable in height by 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal - no installation required on the truck side * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 V and 24 V electrics ----General Attachments: * Landing gear at the front * Rear foldable external supports * Plastic toolbox approx. 858 x 500 x 500 mm, mounted externally on the right front of the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low loader platform: * 50 mm softwood floor * Pre-installation in front of the front wall for subsequent installation of container locks * Bolted 400 mm bulkhead made from smooth sheet metal * Bolted rear stanchions * Sidewalls with spring lifting mechanism ----Load securing: * Perforated outer frame, approx. 45 degrees angled, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing ring in each of the front and rear corners * Various holes in the front and end cross members for 1.2 t lashing options * Profifix lashing rail, centrally in longitudinal axis, for lashing up to LC 3,000 daN ----Ramps: * One-piece hydraulic grid ramps, approx. 2,750 x 600 mm (collapsible to 20 mm spacing) * Hydraulic flow divider inside the trailer (for hydraulic pump output in the truck from over 40 l/min up to max. 140 l/min) ----Paintwork: * Chassis, drawbar, front wall, mechanical support legs, and ramps hot-dip galvanized * Axles, springs, air tanks, front landing gear, and flange drawbar eye painted in black tone * Sideboards painted RAL 9010 pure white * Painting of side panels in any RAL color available at extra cost ----Information: Hnodpfx Aaerwc R Ajaek * New vehicle with manufacturer's warranty * Errors and intermediate sale excepted * Sample images ----Delivery time: * Available approx. from calendar week 16 / 2026

Condition: used, maximum load weight: 12,080 kg, overall weight: 14,400 kg, axle configuration: 2 axles, first registration: 06/2024, loading space length: 3,900 mm, loading space width: 1,920 mm, loading space height: 415 mm, Year of construction: 2022, Equipment: ABS, * ETM-TA 14.4: ----Brakes: * Wabco ABS brake system * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: Hedpfx Aajl Th Dmsajnk * 2 x 7-ton Gigant axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Drawbar Eye: * Height-adjustable drawbar (+/- 150 mm) * 40 mm bolt-on drawbar eye ----General Attachments: * Jost landing gear at the front * Side underrun protection * Rear folding A-board ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----Body: * Fixed steel front and side walls * Removable steel rear wall * Floor made of 50 mm softwood * 1 sliding plate support 750 x 1,000 mm at the front section including 2 removable skip stops at the front, lockable in 2 positions * Rear traverse for attaching aluminium loading ramps, incl. 2 additional rear drop-down supports ----Loading Edge: * Unloaded loading edge approx. 710 mm ----Load Securing: * 4 removable skip stops, can be locked in 2 positions for side centering of skips * 1 x (13.5 t) UVV lashing point per side for attaching tie-down elements * 2 ratchet tensioners (spindle adjustment) with compensating chain and quick shortener (tensioning force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Paintwork: * Chassis, front wall, side walls, mudguards, drawbar, rear drop-down supports hot-dip galvanized * Axles, springs, landing gear, and air reservoirs painted in black ----General Info: * Vehicle registered for one day in 06/2024, due to missing tyre pressure monitoring system; never loaded or used * Errors and prior sale excepted ----Delivery Time: * Immediately available ex Egestorf (A7)

Condition: used, maximum load weight: 31,000 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 07/2024, loading space length: 9,290 mm, loading space width: 2,520 mm, loading space height: 950 mm, * PT 40.0 profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 tonne Gigant axles * Air suspension with lifting and lowering system and RtR valve * Manometer pressure indicator for determining load weight (axles separated into 2 air suspension circuits) * Side impact protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front plastic quarter fender with splash guard Hnsdpfxel Tnu Ao Aaajk * Rear straight galvanized. Sheet steel aprons with splash guard * Reflective contour tape on the side and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power plug * LED lighting system 12 / 24 V * LED rotating beacon (removable) at the rear * 2 LED reversing lights (switched via reverse gear) * Pull scissors with 50 mm pull eye and height adjustment * Tool box made of galvanized sheet steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Front section in front of the bogie platform approx. 490 mm long with 45° corners * ROBOT welded ANTI-SLIP coating for the steel plate of the bogie platform * La-Si package consisting of: in front of the front wall support on the left & right 1 x 13.4 ton each. UVV lashing eye, 4 holes on each side in the bogie platform with a lashing force of 2 tons each, 1 pair of lashing eyes (13.4 tons) hanging at the rear left and right in front of the rear carrier, 4 pairs of UVV lashing rings (10 tons) on each side, can be swiveled and lowered, can be loaded in all directions and embedded in the outer frame, 3 stake pockets on each side with a simultaneous 2 ton lashing option * Hot-dip galvanized mechanical folding boom for a total width of 3 meters (but not in the rear slope) * Plank holder for widening under the chassis on the left in the longitudinal direction * Excavator boom storage above the rear axle to the end carrier approx. 2,100 mm long and approx. 190 mm deep, 2 pairs of 6.4 tons on each side. Lashing rings in the excavator boom storage * Hardwood floor on the running surfaces of the low-loading platform * Hydraulic one-piece ramps (approx. 3,000 x 720 mm) mechanically laterally adjustable * Outer planks of the ramps made of hardwood * Steel construction in preparation for 6-way control slide * Loading edge unloaded approx. 950 mm +/+ 20 mm chassis * Bogie, folding boom, mechanical drop supports, ramps hot-dip galvanized * --Axles, air tank, pull scissors painted in a black tone-- * Tires 235/75 R 17.5 * Vehicle has a daily registration in 07/2024, due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Errors and prior sale subject to reservation * Available for immediate delivery from Egestorf

Condition: used, maximum load weight: 10,870 kg, overall weight: 14,400 kg, axle configuration: 2 axles, first registration: 06/2025, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2023, Equipment: ABS, * KA-TA-R 14.4: * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 ton Gigant axles * Parabolic springs with tandem equalizer unit * Drawbar height adjustable by approx. 300 mm with 40 mm flange towing eye * Jost mechanical landing gear at the front * Two mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm, mounted at the front on the right side of the chassis * 15-pin power connector * Multi-chamber tail lights * Bolt-on underride guard * Plastic quarter mudguards * Net hooks at each position of the central locking and 2 hooks on the front wall * Chassis made of fine-grain steel * Steel pallet 3-way tipping body, continuous side walls at the top with internal pipe reinforcement - without central stanchions, foldable with drop-side spring lifter * Rear stanchions bolted * Combo steel swing doors at the rear, 2-wing asymmetrically split, can be swiveled and locked to 270° - not foldable - with additional pendulum frame for automatic tailgate opening during tipping process, locking via galvanized rotary bar lock at the rear and central locking, deactivation function for automatic tailgate during reverse tipping with opened swing door * Each corner with 1 x 5 ton lashing point and 4 x 3 ton lashing rings recessed into the outer frame on each side * 4 mm steel sheet floor made of fine-grain steel * Rear mounting rail for loading ramps * Reinforced body with load securing certificate * 1 pair of aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 tons per pair) suitable for rubber-tired & tracked vehicles * Lockable storage compartment from the rear recessed under the loading area in the chassis for the ramps * Chassis, drawbar, underride guard, rear stanchion, rear folding supports hot-dip galvanized * Axles, springs, air tank and landing gear painted black * Tires 285/70 19.5 * Side walls painted in RAL 9010 pure white * Painting of the side walls in a different RAL color available at extra cost * Vehicle has a day registration (unused) Hnjdpfxjl Th Duo Aaask * Errors and prior sale excepted * Immediately available from Egestorf

Condition: new, maximum load weight: 10,800 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes Hnjdpforwc R Rjx Aaaok ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic suspension with equalizing unit ----Drawbar / Flange Drawbar Eye: * Drawbar height-adjustable by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring with display functionality in the truck via EBS signal – no truck-side installation required * 15-pin power socket * LED lighting system 12 / 24 V * Multi-voltage EBS system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Support winch at the front * Externally mounted folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm mounted front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood flooring * Provision in front of the bulkhead for retrofitting container locking devices * 400 mm bolt-on smooth steel bulkhead * Bolt-on rear stanchions * Drop sides with spring-assisted lift ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings possible every 600 mm * 1 x 6.3 t lashing point in each front and rear corner * Various holes in the front and rear beams for 1.2 t lashing points * Profifix lashing rail centrally along the longitudinal axis for lashing capacity up to LC 3000 daN ----Ramps: * Single-piece hydraulic steel grate loading ramps, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump performance in the truck from over 40 l/min up to a max. of 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical drop supports, and loading ramps hot-dip galvanized * Axles, springs, air tank, front support winch, and flange drawbar eye painted in black * Drop sides painted RAL 9010 pure white * Painting of side walls in any RAL color available at extra charge ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. week 16/2026

Condition: used, maximum load weight: 31,000 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 07/2024, loading space length: 9,290 mm, loading space width: 2,520 mm, loading space height: 950 mm, * PT 40.0 profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 tonne Gigant axles * Air suspension with lifting and lowering system and RtR valve * Manometer pressure indicator for determining load weight (axles separated into 2 air suspension circuits) * Side impact protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front plastic quarter fender with splash guard * Rear straight galvanized. Sheet steel aprons with splash guard * Reflective contour tape on the side and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power plug * LED lighting system 12 / 24 V * LED rotating beacon (removable) at the rear * 2 LED reversing lights (switched via reverse gear) Hsdpfxsl Tlhre Aaaenk * Pull scissors with 50 mm pull eye and height adjustment * Tool box made of galvanized sheet steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Front section in front of the bogie platform approx. 490 mm long with 45° corners * ROBOT welded ANTI-SLIP coating for the steel plate of the bogie platform * La-Si package consisting of: in front of the front wall support on the left & right 1 x 13.4 ton each. UVV lashing eye, 4 holes on each side in the bogie platform with a lashing force of 2 tons each, 1 pair of lashing eyes (13.4 tons) hanging at the rear left and right in front of the rear carrier, 4 pairs of UVV lashing rings (10 tons) on each side, can be swiveled and lowered, can be loaded in all directions and embedded in the outer frame, 3 stake pockets on each side with a simultaneous 2 ton lashing option * Hot-dip galvanized mechanical folding boom for a total width of 3 meters (but not in the rear slope) * Plank holder for widening under the chassis on the left in the longitudinal direction * Excavator boom storage above the rear axle to the end carrier approx. 2,100 mm long and approx. 190 mm deep, 2 pairs of 6.4 tons on each side. Lashing rings in the excavator boom storage * Hardwood floor on the running surfaces of the low-loading platform * Hydraulic one-piece ramps (approx. 3,000 x 720 mm) mechanically laterally adjustable * Outer planks of the ramps made of hardwood * Steel construction in preparation for 6-way control slide * Loading edge unloaded approx. 950 mm +/+ 20 mm chassis * Bogie, folding boom, mechanical drop supports, ramps hot-dip galvanized * --Axles, air tank, pull scissors painted in a black tone-- * Tires 235/75 R 17.5 * Vehicle has a daily registration in 07/2024, due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Errors and prior sale subject to reservation * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 10,760 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: ---- Brakes: * Drum brakes * Electronic braking system (EBS) * Emergency release device for spring brake actuators ---- Axles: * 2 x 7 t Gigant axles ---- Suspension: * Parabolic springs with compensating unit ---- Drawbar / Flange towing eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange towing eye ---- Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ---- General attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized foldable support legs at the rear * Plastic toolbox, fitted externally at the front right on the bulkhead * Side underrun protection Hnsdpfxervvfle Aaaok * Plastic quarter mudguards ---- Lowbed deck: * 50 mm softwood floor * Preparation in front of bulkhead for retrofitting container locks * Bolted bulkhead made of smooth steel sheet * Side walls made of steel, trapezoidal profile, foldable, with drop-side spring assist * Rear wall made of steel, retractable between the ramps – bracket for storage when not in use, fitted inside at the front bulkhead * Removable bolted rear stanchions ---- Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * 1 x 6.3 t lashing point in each of the four corners (front/rear) * Various boreholes in the front and end crossmember for 1.2 t lashing options ---- Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be slid together up to 20 mm) * Rear approach angle approx. 860 mm ---- Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, ramps, and rear wall * Side panel color RAL 9010 pure white * Side wall painting in any RAL color available for an additional charge ---- Information: * --Reinforced and certified body as per EN 12642 XL, including load securing certificate-- * New vehicle with manufacturer's warranty * Errors and prior sale excepted ---- Delivery time: * Available from week 08/2026

Condition: new, maximum load weight: 10,760 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Draw Eye: * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm (total length 2,250 mm) * 40 mm flange draw eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Attachments: Hedpsxglibsfx Aaaenk * Jost landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right outside on the bulkhead * Side underrun protection * Quarter plastic mudguards ----Low Loader Deck: * 50 mm softwood floor * Preparation at the front bulkhead for retrofitting container locks * Bolted smooth steel bulkhead * Fold-down side panels made from trapezoidal-profiled steel sheet with drop-side lifting assist * Retractable steel tailgate between the ramps (storage bracket inside in the front when not in use) * Bolted rear posts ----Load Securing: * Perforated outer frame, approx. 45 degrees angled, with 2 t lashing capacity every 480 mm * Option for 3 t drop lashing rings every 600 mm * One 6.3 t lashing ring in each front and rear corner * Various bores in the front and rear cross-members for 1.2 t lashing points ----Ramps: * One-piece mechanical mesh access ramps with spring assist for single-person operation approx. 2,750 x 600 mm (can be retracted to 20 mm) * Rear approach slope approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, front bulkhead, access ramps, and rear wall * Drop-side color in RAL 2011 deep orange * Side panels can be painted in any RAL color for an extra charge ----Info: * Reinforced and certified body as per EN 12642 XL, including load securing certificate * New vehicle with manufacturer's warranty * Subject to prior sale and errors excepted ----Delivery Time: * Available from calendar week 08/2026

Condition: new, maximum load weight: 10,760 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders ----Axles: * 2 x 7 t Gigant axles Hnjdpfsq Dyvvsx Aaajk ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (300 mm adjustment range) * Drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange towing eye ----Lighting / Electrics: * TPMS (Tyre Pressure Monitoring System) * LED lighting ----General Accessories: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox mounted front right, outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood flooring * Preparation in front of the bulkhead for retrofitting container locks * Bolted smooth sheet steel bulkhead * Foldable side walls made of trapezoidal steel plate with drop-side lift assist * Steel rear wall, insertable between the ramps - storage bracket located inside, in front of the bulkhead when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Optional installation of 3 t drop lashing points every 600 mm * 1 x 6.3 t lashing rings in each front and rear corner * Various holes in front and rear end crossmembers for 1.2 t lashing options ----Ramps: * Single-piece mechanical grid ramps with spring mechanism for one-person operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear drive-on angle approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, access ramps, and rear wall * Side wall color in RAL 9010 pure white * Painting of side walls in other RAL colors available at extra cost ----Information: * --Reinforced and certified body according to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Available from CW 08/2026

Condition: new, maximum load weight: 10,760 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: Hnjdpfx Aasxglh Reajk ----Brakes: * Drum brakes * Electronic brake system (EBS) * Emergency release device for spring-loaded cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange towing eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Attachments: * Jost landing gear front * Externally mounted, hot-dip galvanized folding supports rear * Plastic toolbox, front right, mounted externally on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Preparation in front of the bulkhead for subsequent installation of container locks * Screw-fastened bulkhead of smooth sheet metal * Side walls made of trapezoidal steel sheet, drop-down with drop side spring lifter * Steel tailgate, retractable between ramps – rack for idle position mounted inside on the bulkhead * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings possible every 600 mm * Each front and rear corner equipped with 1 x 6.3 t lashing ring * Various holes in the front and rear crossmembers for 1.2 t lashing options ----Ramps: * One-piece mechanical grid ramps with spring unit, suitable for single-person operation, approx. 2,750 x 600 mm (can be telescoped down to 20 mm) * Approach bevel at the rear approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, access ramps and rear wall * Drop side colour in RAL 2011 deep orange * Painting of side walls in any RAL colour available at extra cost ----Info: * -- Reinforced and certified superstructure according to EN 12642 XL incl. load securing certificate -- * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available from week 08/2026

Condition: new, maximum load weight: 31,630 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 9,250 mm, loading space width: 2,520 mm, * T 4: * EBS (Electronic Braking System) * Emergency release system for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle equalization front and rear * Tire pressure monitoring with in-cab display via EBS signal – no truck-side installation required * Warning sign packages front & rear * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable LED beacon (rear) * 24 V - 15-pin and additional 12 V - 7+4-pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and infinitely adjustable height * Tool box made of powder-coated steel sheet, and basket-style spare wheel holder on the right side * Front closed plastic single mudguards * Rear straight steel mud flaps each with spray suppression * Side underrun protection * Offset cranked drawbar extended by 500 mm to the front * Turntable platform front extension by 520 mm with 45° corners and 3 recessed lockable storage compartments with lids * Chassis made of high-strength fine-grain steel * Floor above turntable platform 50 mm softwood, low-bed platform 60 mm softwood * Outer boards of ramps made from 50 mm bamboo * Four stake pockets on each side (stakes not included), each with 2 t lashing capacity * Lashing package consisting of: 2 lashing eyes 6.4 t front left and right on main frame of turntable platform, one pair of 13.4 t lashing rings at front and rear on outer frame, four pairs of 10 t swivel and lowerable lashing rings per side, loadable in all directions and recessed into outer frame, two pairs of 6.4 t lashing rings on the side in the excavator arm rest area, eight pairs of galvanized folding outriggers for 3 m total width (not at rear slope) * Side extension boards stored on the left in a storage compartment * Excavator arm tray above rear axle to end of rear slope, approx. 2,300 x 740 x 190 mm * Mechanical drop-down supports at the rear * Hydraulic, hot-dip galvanized ramps approx. 3,000 x 720 mm Hnjdpsl Th Evofx Aaaok * Hydraulic side ramp shift on slide tube from ramp shaft * Loading platform above turntable: approx. 2,990 x 2,520 mm * Rear loading platform: approx. 6,280 x 2,520 mm * Loading height loaded approx. 860 mm (incl. 860 mm rear slope) * Chassis, turntable, ramps, mechanical rear support legs all hot-dip galvanized * Axles, springs, air tanks, and turntable painted black * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from week 21 / 2026

Condition: new, maximum load weight: 31,630 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 9,250 mm, loading space width: 2,520 mm, * T 4: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle equalization front and rear * Tire pressure monitoring with display functionality in the truck via EBS signal (no truck-side installation required) * Warning sign packages front & rear * Reflective contour markings on the sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable LED beacon at rear * 24 V 15-pin power cable, additionally 12 V 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and infinitely adjustable height Hnsdpfxorczm Dj Aaaok * Powder-coated steel toolbox and basket-type spare wheel holder mounted on the right side * Closed single plastic mudguard at the front * Straight rear steel spray suppression mudguards, including spray suppression * Side underrun protection * Extended offset bend, 500 mm forward * Turntable platform extension, 520 mm with 45° corners and 3 recessed, lockable storage compartments with lids * Chassis made of high-tensile fine-grain steel * Deck over turntable platform: 50 mm softwood, low-bed platform: 60 mm softwood * Outer boards of ramps: 50 mm bamboo * 4 stake pockets per side (stakes not included), double as 2 t lashing points * Load securing package includes: 2 lashing eyes (6.4 t) front left & right on main frame of turntable platform; 1 pair each side front & rear (13.4 t) lashing rings on outer frame; 4 pairs per side (10 t) swingable/drop-down multi-directional lashing rings inlet into outer frame; 2 pairs (6.4 t) on excavator arm support; 8 pairs galvanized folding widening brackets for up to 3 m overall width (not in rear slope) * Widening timbers stored in lateral compartment on left side * Excavator arm support above rear axle to end of drive-on slope approx. 2,300 x 740 x 190 mm * Mechanical rear drop-down support legs * Hydraulic, hot-dip galvanized ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp shift via sliding tube on ramp shaft * Deck above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loading height loaded: approx. 860 mm (including 860 mm drive-on slope) * Chassis, turntable, ramps, rear mechanical drop-down supports are hot-dip galvanized * Axles, springs, air tanks, and turntable painted in black * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available from KW 21 / 2026

Condition: new, maximum load weight: 10,400 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * ETK-TA-R 14.4: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm with 40 mm flange drawbar eye ----Electrics / Lighting: * Tyre pressure monitoring with display option in the truck via EBS signal, no truck-side installation required * 15-pin power connector * LED tail lights ----General Attachments: * Mechanical support winch at front * 2 mechanical folding supports at rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Bolted underrun protection * Plastic quarter mudguards ----Frame: * Main frame made of fine-grain steel ----Tipping Platform: * Net hooks on the sides and rear at the central locking brackets as well as 2 hooks on the front wall * Steel pallet two-way tipper structure; fixed front wall made of smooth sheet, continuous drop sides (foldable without central stanchions, equipped with drop side spring keepers) and pendulum function via manual central locking * Removable rear stanchions (bolted) * Steel rear panel inserted in front of the ramps * Each corner equipped with 1 x 5 t lashing point plus 4 x 3 t lashing rings integrated in the outer frame on each side * 4 mm floor made of fine-grain steel ----Ramps: * Two-part mechanical grating loading ramps with aluminium tip section, 2,150 + 1,300 mm x 600 mm (manually retractable to a total of 80 mm) Hnsdpotr Sucsfx Aaajk ----Paintwork: * Chassis, drawbar, rear stanchions, underrun protection, mechanical supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, flange drawbar eye, and support winch painted in black tone * Drop sides and platform in RAL 9010 pure white * Painting of the side walls and tipping platform in a RAL color shade available at extra cost ----Notes: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 07/2026

Condition: new, maximum load weight: 10,400 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * ETK-TA-R 14.4: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-actuated cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar (range 300 mm) with 40 mm flange drawbar eye ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck via EBS signal, no truck-side installation required * 15-pin power connector * LED tail lights ----General Attachments: * Mechanical landing gear at the front * Two mechanical folding supports at the rear * Plastic toolbox approximately 750 x 350 x 300 mm, mounted on the right side * Bolted underrun protection * Plastic quarter mudguards ----Frame: * Main frame made of high-tensile fine-grained steel ----Tipping Platform: * Mesh hooks on the sides and rear at the central locking mounts, plus 2 hooks on the front wall * 2-way steel pallet tipper body with fixed smooth sheet metal front wall, continuous drop sides – foldable without center posts with board lifting springs, and swinging via manual central locking * Rear posts bolted * Steel rear wall inserted in front of the ramps * Each corner with 1 x 5 t lashing point, and 4 x 3 t lashing rings embedded in the outer frame on each side * 4 mm floor made of high-tensile fine-grained steel ----Ramps: * Two-part mechanical mesh drive-up ramps with aluminum tip section, 2,150 + 1,300 mm x 600 mm (can be manually slid together to 80 mm) ----Paintwork: * Chassis, drawbar, rear posts, underrun protection, mechanical supports, and ramps hot-dip galvanized * Axles, springs, air tanks, flange drawbar eye, and landing gear painted in black * Sideboards and platform in RAL 9010 pure white * Paintwork of sidewalls and tipping platform in any RAL color available at extra cost ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale Hnjdpjtr St Uofx Aaaok ----Delivery time: * Available from week 07/2026

Condition: new, maximum load weight: 10,750 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: ----Brake system: Hnedpfx Aasv D Tcbeaek * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange towing eye: * Drawbar height adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange towing eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin electrical connector * LED lighting ----General attachments: * Support winch at the front * External folding support legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted outside front right on the front wall * Side underride protection * Plastic quarter mudguards ----Low-loader deck: * 50 mm softwood flooring * Pre-fitted fixtures on the front wall and at the rear incline for subsequent installation of container locks for transporting 20" containers * Bolted front wall made from smooth sheet metal * Side walls made of folded steel sheet – trapezoidal profile – foldable, split once in the centre * Rear wall made of steel, can be slid in between the ramp holders, stowed inside in front of the front wall when not in use * Rear stanchions bolted ----Load securing: * Perforated outer frame bent to approx. 45 degrees with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible * 1 x 6.3 t lashing ring in each front and rear corner * Several holes in the front and rear cross members for 1.2 t lashing points ----Ramps: * One-piece mechanical mesh-access ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear approach angle approx. 860 mm chassis ----Wheelbase: * Wheelbase 1,140 mm ----Paint finish: * Drawbar, front wall, tailgate, folding supports and access ramps hot-dip galvanized * Axles, springs, air tanks, flange towing eye, and support winch painted in black * Side boards painted RAL 9010 pure white * Side walls can be painted in a RAL colour of your choice at extra cost ----Information: * Reinforced and certified body according to EN 12642 XL incl. load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately from Egestorf at the A7

Condition: new, maximum load weight: 10,750 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: ----Brake System: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Drawbar / Flange Eye: * Drawbar adjustable in height by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange towing eye ----Electrical / Lighting: * RDÜ tire pressure monitoring * 15-pin electrical connector * LED lighting ----General Attachments: * Landing gear front * External folding supports, rear * Plastic toolbox approx. 858 x 500 x 500 mm, front right on the front wall * Side underrun protection * Plastic quarter mudguards ----Low-loader Platform: * 50 mm softwood flooring * Preparation in front of the bulkhead and rear slope for subsequent installation of container locks for transporting 20" containers * Bolted front wall made of smooth sheet metal * Fold-down side walls made of trapezoidal steel sheet, split once in the middle * Removable steel rear wall, can be stowed inside at the front wall when not in use (between ramp holders) * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45 degrees angled, with 2 t lashing force every 480 mm * Option to install 3 t drop lashing brackets every 600 mm * 1 x 6.3 t lashing ring at each front and rear corner * Various holes in the front and rear crossbeam for 1.2 t lashing options ----Ramps: * One-piece mechanical grid ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Approach ramp at rear approx. 860 mm chassis ----Wheelbase: * Wheelbase 1,140 ----Paintwork: * Drawbar, front wall, tailgate, folding supports and ramps hot-dip galvanized * Axles, springs, air tanks, flange towing eye and landing gear painted black * Side boards painted RAL 9010 pure white * Side walls available in custom RAL color at extra charge ----Information: * Reinforced and certified body according to EN 12642 XL, including load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: Hodpfx Aajv Eq Evjaenk * Available immediately from Egestorf on the A7

Condition: new, maximum load weight: 8,620 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2024, * KA-TA-R 11.9: ----Brakes: * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable (up to 300 mm) hot-dip galvanized drawbar with 40 mm flanged towing eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * LED rear lights ----General Attachments: * Jost mechanical landing gear at the front * Two mechanical hot-dip galvanized folding supports at the rear * Galvanized steel toolbox, right-hand side * Hot-dip galvanized bolted underrun protection * Galvanized steel toolbox, right-hand side * Plastic quarter mudguards ----Tipper Body: * Mesh hooks on the sides and rear at the central locking mounts plus 3 at the front wall * Hot-dip galvanized chassis * Steel pallet 3-way tipper body * Continuous drop sides, foldable without centre stanchions, with drop side spring assist * Foldable and swinging tailgate via manual central locking * Hot-dip galvanized, bolted rear stanchions * 4 mm steel floor plate * Preparation for subsequent fitting of side extensions * 5.5 meter long body ----Load Securing: * One 5 t lashing ring at each corner * Plus four 3 t recessed lashing rings per side in the outer frame ----Ramps: * Rear mounting rail for approach ramps * One pair of aluminum approach ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Rear lockable storage compartment recessed under body in chassis ----Wheelbase: * Wheelbase: 990 mm ----Tyres: * Tyres: 235/75R17.5 ----Paintwork: * Axles, springs, air tanks, drawbar and landing gear painted in black * Tipper body painted in RAL 9010 pure white * Painting of side walls and tipper body in any RAL color available for additional cost ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without initial registration, with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: Hsdpfx Asm Angvjaasnk * Available immediately from Egestorf on the A7

Condition: new, maximum load weight: 8,620 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2024, * KA-TA-R 11.9: Hnodpfx Aaol Thx Ejaok ----Brakes: * Electronic Braking System (EBS) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axles ----Suspension: * Parabolic springs with tandem equaliser unit ----Drawbar / Flange Eye: * Height-adjustable, hot-dip galvanised drawbar, adjustable by 300 mm, with 40 mm flange eye ----Electrics / Lighting: * Tire Pressure Monitoring System (TPMS) * 15-pin power connector * LED tail lights ----General Attachments: * Jost mechanical landing gear at the front * Rear: 2 mechanical, hot-dip galvanised folding support legs * Tool box made of galvanised sheet steel, mounted on the right side * Hot-dip galvanised, bolted underrun protection * Plastic quarter mudguards ----Tipper Platform: * Net hooks on the sides and rear integrated into the central locking brackets, plus 3 hooks on the front wall * Hot-dip galvanised chassis * 3-way tipping steel platform for pallets * Continuous drop sides without intermediate stanchions, foldable with drop side spring loaders * Rear drop gate can be folded down or operated in pendulum mode via manual central locking * Bolted, hot-dip galvanised rear stanchions * 4 mm steel floor plate * Prepared for retrofitting of drop side extensions * 5.5 metre-long platform ----Load Securing: * Each corner fitted with 1 x 5 t lashing ring * 4 x 3 t lashing rings integrated into the outer frame on each side ----Ramps: * Rear guide rails for loading ramps * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment under the loading area at the rear, integrated into the chassis ----Wheelbase: * Wheelbase: 990 mm ----Tyres: * Tyres: 235/75R17.5 ----Paintwork: * Axles, springs, air tanks, drawbar and landing gear painted in a shade of black * Platform superstructure colour: RAL 9010 pure white * Painting of the side walls and tipping platform in an RAL colour tone available at extra cost ----Information: * Reinforced superstructure with load securing certificate according to EN 12642 XL * New vehicle without initial registration, with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately ex works Egestorf (A7 motorway)

Condition: new, maximum load weight: 14,400 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-ER 19.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 ton Gigant axles * Air suspension with lifting and lowering system * Drawbar with 50 mm flange eye and height adjustment of 110 mm via offset plate * Jost landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector Hnedpfemi Tcqex Aaask * Multi-chamber tail lights * Reinforcement package on the chassis for drill rig transport * 50 mm softwood floor, clamped design * Fixture for retrofitting container locks in front of the bulkhead * Bolted bulkhead made of smooth sheet metal * Split side walls made of trapezoidal-profiled steel sheet, foldable with a central folding stanchion * Steel rear wall, retractable between the ramps – storage holder inside in front of the bulkhead when not in use * Rear stanchions bolted * Perforated outer frame, angled approx. 45 degrees, with 2 ton lashing capacity every 480 mm * Option to install 3 ton drop lashing rings every 600 mm * Load securing package: in each corner at the front and rear, 1 x 10 ton UVV lashing ring; on each side, 2 x 8 ton UVV recessed lashing rings in the outer frame; various holes in the bulkhead and end crossmember for 1.2 ton lashing options * One-piece slide-in ramps, 12 t/pair of ramps, approx. 2,750 x 620 mm * Rear approach angle approx. 860 mm * Chassis, drawbar, bulkhead, tailgate, folding supports, and ramps hot-dip galvanized * ---Axles, air reservoir, flange towing eye, and landing gear painted in black--- * Unloaded loading height approx. 940 mm * Loaded loading height approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Errors and prior sale excepted * Available immediately from Egestorf