Low loader trailer

MÜLLER-MITTELTAL 18 t. Kombi Abroller Absetzer Tieflader, Luft

Condition: new, maximum load weight: 13,650 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, * TRA-Kombi 18.0: * RDÜ (Tire Pressure Monitoring), display possible in the truck via EBS signal (no truck-side installation required) * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 10.5-ton axles * Air suspension with manual lowering at the rear * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment * Tool box made of powder-coated sheet steel and spare wheel holder in basket design, mounted on the right side * Contour tape on sides and rear, reflective * Enclosed side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact buffers * Foldable A-sign at the rear * LED tail lights * 15-pin electrical connector * Hot-dip galvanized main frame with raised outer frame for guiding roll-off containers Gjdpfjl Tld Iox Ab Aeuk * Steel sheet floor with roll recesses in the bogie area * For roll-off container transport, container length from 5,500 to 7,000 mm possible * Pneumatic four-point clamp locking and mechanical plug-in front stop angles on the guide track * Load securing certificate according to DIN 30722-1 * 1 transport operation for up to 2 skip containers with max. 10 m³ volume possible * Includes 8 repositionable skip stops for lateral centering of skips; front 4 skip stops plugged in and with pivoting stops * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning devices for positive and non-positive securing of the skips; 4 lashing bars in cloverleaf design (on the sides) each and 1 pair of 13.4 t UVV lashing rings at the front * Load securing package with additional 4 x 8 t lashing rings each side, integrated into the outer frame * Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Weld bead as anti-slip coating in the ramp area of the inclined plane * Mechanical drop-down supports at the rear * Aluminium loading ramps (10.6 t / pair) 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment accessible from the rear) * --Permissible gross vehicle weight technically possible: 20,000 kg-- * New vehicle without first registration, with manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Condition: new, overall weight: 18,000 kg, axle configuration: 2 axles, Year of construction: 2025, Equipment: ABS, WEB-Trailer WFZ/W-18 235/75 17.5 turntable swap trailer 400 lift, for swap bodies C7.15 to C7.45 Chassis flush with the rear for swap bodies, total length 7150 mm Attention: max. body length 7450 permitted) Chassis designed for swap bodies from 7150 to max. 7450 mm (symmetrical bodies) 2 booms and with 4 retractable pivot pin locks, 20" Arrangement for receiving swap bodies Spring center approx. 1100 mm Parking height approx. 970 to 1220 mm Underride height approx. 930 mm on level ground Axle loads: 18,000 kg (2 x 9000 kg) Driving position approx. 970mm (unloaded) Coupling height (middle) approx. 730 mm unloaded Front stop, foldable and adjustable for 7150 + 7450 mm symmetrical swap bodies Side impact protection set approx. 30 mm inwards Side impact protection on both sides Underrun protection in special width approx. 2300 mm Approval/COC Free choice of manufacturer axle Axle 9 ton 17.5" drum brake Air suspension unit 9 ton load capacity each with bellows diameter approx. 300 mm Total stroke approx. 400 mm (without height limit) Control unit lifting + lowering on the left in the direction of travel Two-line compressed air brake system EG 71-320 EBS brake system Make of choice of manufacturer Brand tires 235/75 R 17.5 Tire pressure control flashing SML 15-pin lighting system 24 volt LED Plastic fender, 180 degrees, over each axle Anti-spray mud flaps Fender bracket in galvanized version Chassis painted in RAL KTL coating with zinc phosphating plus powder, highest corrosion protection or hot-dip galvanized Price ex works Gujdpfx Aeg Dkw Ssb Aok Please note!!! Pictures show special equipment Let us advise you and work out a free and non-binding offer. Leasing, financing or hire purchase possible! We can respond to your wishes! Ask us - we will be happy to make you an offer. Errors and prior sale reserved!!!

Condition: new, maximum load weight: 13,650 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, * TRA-Kombi 18.0: * TPMS (Tire Pressure Monitoring System), display option in the truck via EBS signal (no truck-side installation required) * EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 10.5-ton axles * Air suspension with manual lowering at the rear * Pneumatically lowerable towing bar, 2,100 mm long with 40 mm towing eye and height adjustment device * Powder-coated steel toolbox and spare wheel holder in basket design mounted on the right side * Reflective contour tape on sides and rear * Enclosed side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact bumpers Gsdpfx Abjwb Raks Aeuk * Foldable A-sign at the rear * LED tail lights * 15-pin power connector * Hot-dip galvanized main frame with raised outer rails to guide roller containers * Steel floor with recessed rollers in the bogie area * For roll-off container transport, container lengths from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking system and mechanically insertable stop brackets at the front in the track * Load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Eight removable skip stops for lateral centering, the front four are pinned with pendulum stops * Three pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and friction-locked securing of the skips, four cloverleaf lashing bars each side, and one pair of 13.4 t UVV lashing rings at the front * Load securing package with additionally four 8 t lashing eyes each side integrated into the outer frame * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Weld bead as anti-slip coating in the ramp area * Mechanical drop supports at the rear * Aluminium approach ramps (10.6 t / pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) * --Permissible total weight technically possible: 20,000 kg-- * New vehicle without initial registration, with manufacturer’s warranty * Errors and prior sale excepted * Immediately available from Egestorf

Condition: used, mileage: 712,177 km, power: 427 kW (580.56 HP), first registration: 01/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, LOWLINER, auxiliary drive, ZF Intarder, emergency braking assist, lane departure warning, adaptive cruise control, stability control, ABS, ASR, rear differential lock, MAN BrakeMatic, MAN TipMatic, cruise control, start-off assist, hill start assist, navigation system, rearview camera/pre-installation, comfort cockpit, roof-mounted air conditioning, automatic climate control, auxiliary heating, multifunction steering wheel, heated and electrically adjustable exterior mirrors, electric windows for driver and passenger doors, "ISRI" driver comfort suspension seat, "ISRI" passenger comfort suspension seat, leather seats, 2 sleeping beds, cool box, fog lights, headlight cleaning system, air horns on the cab roof, hydraulic connection for a dual-circuit trailer, air suspension with lifting and lowering device (front and rear axle). The vehicle may be covered with advertising and/or lettering. Our offer generally does not include a new TÜV inspection. If you require a new MOT, we would be happy to provide you with a quote from our partner workshops! The vehicle may be covered with advertising and/or lettering. Our general terms and conditions of delivery and payment apply. We would be happy to provide you with a financing or leasing offer for this vehicle. Please contact us! Guedpfxov T E Nfj Ab Ajk

Condition: new, maximum load weight: 10,360 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-ER 14.4: * RDÜ (tire pressure monitoring with display option in the truck via EBS signal without truck-side installation) * Electronic braking system EBS * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 5.5 tonnes Gigant axles * Air suspension with lifting and lowering system * Drawbar height adjustable by 300 mm * Jost landing gear at the front * External hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right, outside the bulkhead * Side impact protection * Plastic quarter fenders * LED lighting system Guodpfjpk D Dqex Ab Ask * 15-pin power connector * Hot-dip galvanized chassis, drawbar, bulkhead, and rear wall * 50 mm softwood floor * Provision for retrofitting 20" counterlocks at the front and rear * Bolted smooth sheet metal bulkhead * Trapezoidal steel sheet sidewalls, foldable with side wall spring jack * Bolted hot-dip galvanized rear stanchions * Perforated outer frame, angled at approximately 45 degrees, with a 2-ton lashing capacity every 480 mm, installation of 3-ton drop lashing brackets every 600 mm possible, 1 x 6.3 ton lashing ring in each of the front and rear corners, various holes in the front and end beams for 1.2 ton lashing options * 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 tonnes per pair) suitable for rubber-tired and tracked vehicles. Storage compartment recessed into the chassis below the loading area from the rear. * Vehicle hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale subject to change * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 14,400 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-ER 19.0: * WabcoEBS-E (electronic braking system) * RDÜ tire monitoring system * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lift and lowering system * Drawbar with 50 mm flange eyelet and height adjustment of 110 mm via offset plate * Jost landing gear at the front * Outward folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm on the right side * Side underrun protection * Plastic quarter mudguards * 15-pin power plug * Multi-chamber tail lights * Reinforcement package for drill rig transport on the chassis * 50 mm softwood floor in clamped version * Preparation in front of the front wall for subsequent installation of container locks * Bolted front wall made of smooth sheet metal * Split steel side walls - trapezoidal profile - foldable with center folding stanchion * Steel rear wall can be slid in between the ramps - holder for non-use inside in front of the front wall * Rear stakes bolted * Perforated outer frame bent at approx. 45 degrees with 2 t lashing capacity every 480 mm * Installation of 3 t quick-lash rings possible every 600 mm * Lasi package: in the corners at the front and rear each 1 x 10 t UVV lashing ring, on each side 2 x 8 t UVV retractable lashing rings in the outer frame, various holes in the front and end carrier for 1.2 t lashing options * One-piece slide-in ramps approx. 2,750 x 620 mm Gusdpfx Aomi Tmajb Aok * Approach angle at rear approx. 860 mm * Chassis, drawbar, front wall, tailgate, folding supports and drive-on ramps hot-dip galvanized * --- Axles, air tanks, flange eyelet and landing gear painted in a shade of black --- * Loading height unladen approx. 940 mm * Loading height laden approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and interim sale excepted * Immediately available from Egestorf