Used Müller-Mitteltal T Trailers for sale (261)

Condition: used, maximum load weight: 4,500 kg, overall weight: 6,500 kg, axle configuration: 2 axles, first registration: 07/1979, next inspection (TÜV): 04/2026, loading space length: 4,000 mm, loading space width: 1,900 mm, loading space height: 380 mm, total width: 2,500 mm, total height: 3,000 mm, Year of construction: 1979,

Condition: new, maximum load weight: 30,740 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Year of construction: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift/lower system and RtR valve * Smard board for payload weight determination * Warning sign packages front & rear * Reflective contour tape on the sides and rear * Rear removable beacon light * LED lighting * Straight drawbar with 50 mm towing eye and continuously variable height adjustment * Tool box made of powder-coated sheet steel and spare wheel holder in basket design, fitted on the right side * Front closed single fender made of plastic * Rear straight steel mudguard aprons, each with spray protection (spray suppression) * Side underrun protection * Turntable platform extended by 520 mm with 45° corners and three integrated storage compartments incl. lids, lockable * Chassis made of high-strength fine-grain steel * Flooring above turntable platform made of 50 mm and in low-bed platform of 60 mm softwood * Outer planks of access ramps made of hardwood Fjdpsl Tphrsfx Aa Roft * 4 stake pockets per side (stakes not included), each with 2 t lashing point * Lashing package consisting of: 2 lashing eyes 6.4 t at the front left and right on the main frame of the turntable platform * On each side front and rear: 2 pairs of 13.4 t lashing rings on the outer frame, and 4 pairs of 10 t lashing rings per side, swiveling and retractable * Loadable in all directions and recessed into the outer frame * 2 pairs of 6.4 t lashing rings in the excavator arm recess * 8 pairs of galvanized folding outriggers for 3 m total width (except for the rear slope) * Widening planks stored in a box on the left side * Excavator arm recess above the rear axle up to the start of the ramp incline: approx. 2,100 x 740 x 190 mm * Mechanical support legs at rear * Hydraulic folding ramps with hydraulically extendable tip section approx. 4,650 x 720 mm incl. hydraulic ramp lateral shift & load holding valve * Load area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loaded deck height: approx. 890 mm, +/- 20 mm (incl. 860 mm ramp incline) * Flow divider installed * Chassis, turntable, access ramps, folding outriggers, and mechanical support legs hot-dip galvanized * Axles, drawbar, air tanks and turntable painted in black * Tires: 235/75 R 17.5 * New vehicle without initial registration with manufacturer’s warranty * Errors and prior sale reserved * Available from CW 07/2026

Condition: used, maximum load weight: 29,750 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 03/2010, next inspection (TÜV): 05/2026, Dimensions - Length: 11,750 mm Unladen weight: 10,250 kg Axle load: 2 x 10,000 kg Load length over turntable: 2,400 mm incl. 350 mm bevel Load length: 7,700 mm incl. 900 mm bevel Loading height: 880 mm Width: 2,550 mm, extendable to 3,000 mm ? Recess for excavator arm storage (LxWxH approx. 2,500 x 740 x 180 mm) SAF axles with air suspension Two-piece hydraulic ramps: 2,100 mm + 2,000 mm long, 650 mm wide incl. Hydraulic ramps adjustable Hydraulic rear support Wheel recess after the 2nd axle: ? Front wheel recess, top length approx. 2,000 mm x 1,100 mm, bottom depth approx. 350 mm Ffsdpfjxpmmmjx Aa Ret Wheel recesses between 3rd and 4th axle: ? Rear wheel recess, top length approx. 1,300 mm x 550 mm, bottom depth approx. 220 mm

Condition: used, empty load weight: 3,280 kg, maximum load weight: 14,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 09/2013, suspension: air, tire size: 265/70 R19,5, wheelbase: 5,030 mm, Equipment: ABS, | Müller-Mitteltal roll-off trailer | Toolbox | Galvanized | Tires: 265/70R19.5 | Disc brake BPW | TÜV valid until | Errors, input and advance sales reserved. Fsdpfx Aaowd Sdco Roft

Condition: new, maximum load weight: 11,000 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 1,000 mm, Year of construction: 2025, Equipment: ABS, tail-lift, * Müller-Mitteltal KA-TA-R 14.4 Tandem Low Loader Three-Way Tipper Trailer with Ramps - NEW VEHICLE * Immediately available in RAL 9016 traffic white * Leasing, financing, and trade-in for your old trailer possible * Reference number for inquiries: 11563 * Remote data transmission with display capability in the truck via EBS signal * Side marker lights with indicator activation * EBS brake system 2S/2M * Gross weight: 14.4t, Payload approx. 11t. * Galvanized floor * 5m x 2.42m x 0.5m + 0.5m steel extensions, 3 sides swinging and foldable, painted, side walls laser-welded * Lockable compartment under the tipping body for loading ramps * 1 pair of aluminium loading ramps 8t/pair, 3.57m, included * Chassis hot-dip galvanized, front wall hot-dip galvanized * 4 UVV lashing rings LC 5000daN at front and rear + 8 flush-mounted and foldable lashing eyes LC 3000daN in the tipper floor (aligned) * Hardwood excavator bucket rest * Two-step ascent in front of the front wall (hot-dip galvanized) * Drawbar stepless height-adjustable, hot-dip galvanized, 40mm towing eye * Wide tires 385/55R 19.5 (4x), parabolic springs * Mesh hooks, screwed-on rear stanchions, hot-dip galvanized Fodpexdp U Asfx Aa Rjft * Tensioning cables for the rear side wall * Plastic toolbox on the right side of the chassis frame * LED lighting system 12 + 24 Volt * 2 LED reversing lights at the rear of the trailer * Hire purchase price: * e.g. €579 for 60 months with no down payment and no final installment. An offer from our financing partner "FM LeasingPartner". Other contract terms with/without final payment or down payment possible. * Request an offer from us! * We are a Müller-Mitteltal authorised dealer ----Our opening hours Monday - Thursday: 08:00 - 17:00 Friday: 08:00 - 15:00 Outside these hours, we are available by appointment. We speak German, English, Polish and French. WhatsApp / Facetime

Condition: used, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 01/2014, loading space volume: 10 m³, total width: 2,500 mm, total height: 4,000 mm, Equipment: ABS, For any questions about the vehicle, please contact Mr. Seidel (tel. ). ----MÜLLER MITTELTAL SF32BM/BT Concrete Mixer Trailer---- * Body: Liebherr HTM 1004 10m³ * BPW axles * Drum brakes * Spring brakes * Wabco ABS * Liftable 1st axle * Air suspension * Gross vehicle weight: 32,000kg * Unladen weight: 6,510kg * Payload: 25,490kg * Tire tread: 1st axle 14-15mm, 2nd axle 10mm We can provide you with a leasing or financing offer upon request. Mr. Seidel (tel. ) will be happy to assist you. Further information can be found on our website. Ffsdpfswipfnjx Aa Ret !!! Errors, changes, and prior sale reserved!!!

Condition: used, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 02/2021, next inspection (TÜV): 08/2026, loading space length: 4,800 mm, loading space width: 2,430 mm, loading space height: 500 mm, Equipment: ABS, Müller-Mitteltal low-loader tipper - Low-loader and two-way tipper combined in a single vehicle - 40 mm towing eye - Air brake system - Support legs for loading and unloading - Gigant axles Ffsdpfx Aajxc Sv Hs Rst - Tyres: 235/75 R 17.5 - Drum brakes - Unladen weight: 3,620 kg - Height-adjustable drawbar - TÜV due: 08.2026 - Safety inspection (SP) due: 02.2026 - Loading area length: 4,800 mm - Loading area width: 2,430 mm - Side wall height: 0.5 m Errors and prior sale excepted. Internal vehicle number: 11349.

Condition: new, maximum load weight: 38,290 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 8,500 mm, loading space width: 2,520 mm, Year of construction: 2025, * TS 3 Profile 30.0: * Wabco EBS-E (electronic brake system) * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring cylinders * Drum brakes * 3 x 11 t BPW Eco Plus axles * Air suspension with lift and lower function as well as RtR valve * Last axle self-steering with electro-pneumatic steering lock * Smartboard control box as information tool mounted on the trailer with pressure sensors for total axle load display * Side underrun protection * Support winches at the front and mechanical swing-down supports at the rear of the chassis * 15-pin electrical connector * LED lighting system 12 / 24V * Removable LED rotating beacon, rear left * Mechanically adjustable warning sign packages front and rear * Straight steel sheet mudguards * Spare wheel holder underneath chassis, right side * Fifth wheel platform with 45° chamfered front corners and front toolbox made of galvanized steel, W = 2,480 x H = 500 x L = 665 mm with folding lid * On the sides of the fifth wheel platform: 400 mm fold-down/removable aluminum side walls (RAL 9010 pure white) Fodpfx Aael Tnvgs Roft * Rear wall inserted, 150 mm high * Rear slope on fifth wheel platform to lowbed, approx. 700 mm long * Fifth wheel platform with 50 mm wooden planks and lowbed with 60 mm wooden planks * Chequer plate over the axles * 8 x mechanical fold-out extensions to a total width of 3 m, but not on the rear slope (extension planks available and stored on the fifth wheel platform) * Lashing package: on the fifth wheel platform, 2 x 6.3 t lashing points each, on the side 3 x 5 t lashing bars in the outer frame, on the lowbed sides 2 x 13.4 t lashing rings each, plus 4 x 10 t lashing rings, pivoting and retractable/flush-mounted in the outer frame; each side 2 x 6.4 t lashing eyes and 1 lashing point at the rear in the excavator arm recess * Excavator arm recess from the end of the last fixed axle over the steering axle to the rear end plate, continuous with internal reinforcement profiles, approx. L = 2,450 x W = 770 mm x D = 270 mm * 2 x container locks directly after the gooseneck on the lowbed * Mechanical one-piece hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control block for future customer installation of hydraulic ramp shifting * The outer plank on the ramp is made of 50 mm hardwood * Hydraulic distributor in the trailer (for hydraulic pump performance in the truck from over 40 ltr. up to 120 ltr./min.) * Loading area of the fifth wheel platform: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm approach slope) * Fifth wheel height approx. 1,220 mm (suitable for 2- and 3-axle tractors) * Chassis, ramps, rear supports, and extension consoles hot-dip galvanized * Axles, support winches, and air tanks painted in black * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from CW 16/2026

Condition: new, maximum load weight: 10,970 kg, overall weight: 14,400 kg, axle configuration: 2 axles, KA-TA-R 14.4 - Truck Tandem Three-Way Tipper - Standard payload approx.: 11,050 kg - Upgradeable to 14.4 t gross weight with 285/70R19.5 tires Ffodpfx Aaoxmwiyo Rjt - Internal dimensions: 5,000 x 2,420 x 500 mm - Loaded floor height: 1,040 mm - 1 chassis with underride protection, hot-dip galvanized version - Paintwork: Axles with springs, air tanks, etc., in black - 3 pairs of recessed, folding lashing hooks in the steel floor, LC 3,000 daN - ABS 2 S/2 M, 24 Volt - 2 spring arms for 500 mm high steel side walls - 1 central locking on left and right, pivoting for one-piece side walls Additional equipment: 1 pair of UVV lashing rings recessed into the steel floor, instead of on top of the steel floor 1 Hardox 450 steel floor, 4 mm thick Drawbar height adjustment via bevel gearbox with crank operation instead of standard version 1 pair of aluminum drive-on ramps without edges (8.0 t/pair), 3,500 x 400 x 105 mm, suitable for rubber-tired and tracked vehicles Toolbox

Condition: used, empty load weight: 4,120 kg, maximum load weight: 13,880 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2016, next inspection (TÜV): 02/2026, loading space length: 5,000 mm, loading space width: 2,360 mm, loading space height: 900 mm, loading space volume: 10 m³, suspension: air, tire size: 385/65R22.5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, BPW axles, tandem, air suspension, ABS (anti-lock braking system), underrun protection, front support, pendulum tailgates. Superstructure: Tandem tipping trailer with aluminium drop sides, approx. 10m³, 2x 9t BPW axles, drum brakes! Loading height approx. 1510mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, intermediate sale and errors excepted! Ffsdpfexfli Ejx Aa Rot

Condition: new, maximum load weight: 8,770 kg, Year of construction: 2025, ABS Müller Mitteltal ETÜ TA R 11.9 Tandem Low Loader with many extras Fjdpfxoxcxmfo Aa Rsft Equipment includes: - 2 spring-assisted lifting devices for 400 mm high steel side walls - Reinforced and certified construction according to EN 12642 XL load securing certificate - 10 UVV lashing rings integrated into the existing external frame hole pattern - Additional wooden floor in clamped design - Tyres: 235/75R17.5 - Four BPW axles instead of GIGANT - Platform extension by 870 mm, total length 6,270 mm - One-piece ramps with hot-dip galvanized anti-slip grating - Lockable toolbox with 45 kg payload capacity Paintwork: - Wheels: silver - Chassis/front wall/drawbar/rear wall/stanchions/ramps: hot-dip galvanized - Axles/springs: black - Side walls: RAL2011 deep orange We are happy to offer you suitable financing, hire purchase or leasing options. Delivery or shipping by arrangement. We always have a selection of new machines in stock, as well as demonstration units. Contact us today! We rent vehicles and machines with or without operator. A wide range of used machines and equipment always available. Technical changes, errors and prior sale excepted.

Condition: used, maximum load weight: 10,100 kg, overall weight: 13,500 kg, axle configuration: 2 axles, first registration: 03/2001, next inspection (TÜV): 11/2025, loading space length: 6,000 mm, loading space width: 2,460 mm, loading space height: 1,000 mm, total width: 2,550 mm, Gross weight: 13,500 kg Unladen weight: 3,400 kg Payload: 10,100 kg Overall length: 8,100 mm Fsdpfx Ajw Nu I Tsa Rjft Loading length: 6,000 mm Width: overall width 2,550 mm / platform width 2,460 mm Loading height: approx. 1,000 mm Further information - Tyres: 285/70R19.5 - Side walls 400 mm, split 1x

Condition: used, maximum load weight: 34,400 kg, overall weight: 45,000 kg, axle configuration: 3 axles, first registration: 04/2009, next inspection (TÜV): 07/2024, Equipment: ABS, Further questions via WhatsApp Fjdpst E Eunefx Aa Reft

Condition: new, maximum load weight: 38,290 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 8,500 mm, loading space width: 2,520 mm, Year of construction: 2026, * TS 3 Profile 30.0: * Wabco EBS-E (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco Plus axles * Air suspension with lifting and lowering device, incl. RtR valve * Last axle self-steering with electro-pneumatic steering lock * Smartboard control unit installed on the trailer, serving as information tool with pressure sensors for total axle load display * Side underrun protection * Support winches at the front and mechanical swivel supports at the rear of the chassis * 15-pin electrical connector * 12/24V LED lighting system * Removable LED beacon at rear left * Mechanically adjustable warning panel sets at the front and rear * Straight steel mudguards Fjdpfx Aopk D I Aja Rjft * Spare wheel holder mounted under the chassis on the right side * Fifth wheel platform with 45° chamfered front corners and front toolbox made of galvanized steel sheet, dimensions W = 2,480 x H = 500 x L = 665 mm with folding lid * 400 mm high drop-down and removable aluminium sideboards (RAL 9010 pure white) mounted on the sides of the fifth wheel platform * Rear drop-in panel – 150 mm high * Rear slope on the fifth wheel platform to lowbed approx. 700 mm long * Fifth wheel platform fitted with 50 mm wooden floorboards, lowbed deck with 60 mm wooden floorboards * Tread plate over the axles * 8 x mechanical folding extensions up to 3 m total width, excluding the rear slope (extension planks available, stored on the platform) * Load securing package: on the platform, each side with 2 x 6.3 t lashing points; on each side 3 x 5 t lashing bars in the outer frame; lowbed section with 2 x 13.4 t lashing rings per side, 4 x 10 t retractable and fold-down lashing rings recessed in the outer frame, each side with 2 x 6.4 t lashing eyes and one rear lashing point in the excavator arm recess * Excavator recess: continuous from the end of the last fixed axle over steering axle up to end beam, with internal reinforcement profile approx. L = 2,450 x W = 770 mm x D = 270 mm * 2 x container locks directly after the neck on the lowbed deck * Mechanical one-piece hot-dip galvanized hydraulic ramps approx. 3,000 x 720 mm (mechanically adjustable sideways) * 4-way control valve for retrofit hydraulic ramp shift by customer * The outer ramp plank is made from 50 mm hardwood * Hydraulic flow divider in the trailer (for truck hydraulic pump flow rates from over 40 l/min up to 120 l/min) * Loading area of the fifth wheel platform: approx. 3,935 x 2,480 mm * Lowbed loading area: approx. 8,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm approach slope) * Saddle height approx. 1,220 mm (suitable for 2- and 3-axle tractor units) * Chassis, ramps, rear folding supports, extension consoles hot-dip galvanized * Axles, support winches, air tanks painted in black * Hydraulic flow divider * Vehicle is hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from 16/2026

Condition: used, maximum load weight: 8,000 kg, overall weight: 11,000 kg, axle configuration: 2 axles, first registration: 10/2000, loading space length: 5,600 mm, loading space width: 2,480 mm, loading space height: 900 mm, total width: 2,550 mm, Total weight: 11,000 kg Unladen weight: 3,000 kg Payload: 8,000 kg Overall length: 7,450 mm Loading length: total 5,600 mm, of which rear incline 1,000 mm Width: total width 2,550 mm / platform width 2,480 mm Loading height: approx. 900 mm Ffedpfewz Drgox Aa Ret Further information - Side wall height: 400 mm, split and foldable - Split spring ramps, dimensions approx. L: 3,380 mm W: 600 mm - Ramps covered with phenolic plywood - Large lashing package - BPW axles - Tyres: 235/75 R17.5 - LED reversing lights - Plastic toolbox

Condition: new, maximum load weight: 30,740 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Year of construction: 2026, * T 4: * Wabco EBS-E (electronic brake system) * RDÜ Tire Pressure Monitoring System * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift and lowering function and RtR valve * Smard-Board for load weight determination * Warning sign packages front & rear * Contour tape on sides and rear, reflective * Removable rotating beacon at the rear * LED lighting * Straight drawbar with 50 mm tow eye and infinitely adjustable height * Tool box made of powder-coated steel sheet and spare wheel holder in basket design, right side * Front closed single plastic fenders * Rear straight steel mudguards with spray suppression (anti-spray) * Lateral underrun protection * Turntable platform extension by 520 mm with 45° corners and 3 integrated lockable compartments incl. lids * Chassis made of high-strength fine-grained steel * Floor over turntable platform made of 50 mm and on low-bed platform of 60 mm softwood * Outer planks of the drive-on ramps made of hardwood * Four stake pockets per side (no stakes included) with simultaneous 2 t lashing option * Load securing package consisting of: 2 lashing eyes 6.4 t at front left and right on the main frame of the turntable platform * Per side at front and rear, 2 pairs of 13.4 t lashing rings on the outer frame; per side, 4 pairs of 10 t lashing rings, swiveling and lowerable * Loadable in all directions, recessed into the outer frame * 2 pairs of 6.4 t lashing rings on the side in the excavator arm support * 8 pairs of galvanized folding outriggers for a total width of 3 m (not in the rear slope) * Widening planks stored in a compartment on the left side * Excavator arm resting area above the rear axle up to end of approach slope approx. 2,100 x 740 x 190 mm * Mechanical drop supports at rear * Hydraulic folding ramps with hydraulically adjustable ramp tip approx. 4,650 x 720 mm including hydraulic ramp side shift & load-holding valve Fodpfx Aajl Tik No Rjft * Loading area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height loaded: approx. 890 mm, +/- 20 mm (incl. 860 mm approach slope) * Flow divider installed * Chassis, turntable, ramps, folding outriggers, and mechanical drop supports hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in black tone * Tires 235/75 R 17.5 * New vehicle without initial registration with manufacturer's warranty * Subject to errors and prior sale * Available from CW 07/2025

Condition: used, maximum load weight: 30,350 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 09/2007, loading space length: 9,800 mm, loading space width: 2,520 mm, total width: 2,550 mm, Total weight: 24,000 kg / 40,000 kg Unladen weight: 9,650 kg Payload: 14,350 kg / 30,350 kg Total length: 11,750 mm Loading length: 9,800 mm, offset approx. 2,400 mm, low bed with rear attachment approx. 7,400 mm. Width: 2,550 mm Loading height: 860 mm Further information - Long, 2-part ramps with hydraulic operation - Excavator bucket rest - Twin tires 235/75 R17.5" - Wheel recesses - BPW axles - Large lashing package - Warning signs Fodpjwlyx Rofx Aa Roft - 3 m widening - LED reversing lights - Total bulkhead 2,000 mm All further information at

Condition: new, maximum load weight: 5,840 kg, overall weight: 8,800 kg, axle configuration: 1 axle, Year of construction: 2025, * KWH 8.8 ML: * RDÜ tire pressure monitoring * EBS brake system * Drum brake * BPW axle * Parabolic springs * Support winch at the front * Spring-supported square tube supports at the rear with base plate safety plug pins for different support heights * Drawbar with 40 mm screw eyelet (height adjustable mm) * 15-pin power plug * LED lighting * Flashing LED side marker lights Fedpfxsu I Iqxe Aa Roft * Chassis made of torsion-resistant square tubes and cross members * Closed mudguard made of sheet steel with splash guard * Closed. side impact protection can be used as advertising space * plastic tool box with floor insert (horizontal installation) approx. 500 x 350 x 400 mm * swiveling cable drum structure, clear width between the drum arms 1,700 mm - with tension lock to secure the drum at the ends of the support arms and locking of the cable drum structure to the chassis using a claw lock located in the middle * motor-hydraulic drum drive with oil motor * valves and movable rubber-coated drive rollers * hydr. Speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter as well as centering and rotating ends * 1 pair of centering cones made of polyamide, stepped * Hydraulic pump unit with diesel engine * Fuel tank and manual starter * 6.5 HP with gear pump (150 bar) * Color hot-dip galvanized * New vehicle with full manufacturer's warranty * Errors and prior sale subject to reservation * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 5,840 kg, overall weight: 8,800 kg, axle configuration: 1 axle, Year of construction: 2025, * KWH 8.8 ML: * RDÜ tire pressure monitoring * EBS brake system * Drum brake * BPW axle * Parabolic springs * Support winch at the front * Spring-supported square tube supports at the rear with base plate safety plug pins for different support heights * Drawbar with 40 mm screw eyelet (height adjustable mm) * 15-pin power plug * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and cross members * Closed mudguard made of sheet steel with splash guard * Closed. side impact protection can be used as advertising space Ffodpfx Aou I Iqloa Rot * plastic tool box with floor insert (horizontal installation) approx. 500 x 350 x 400 mm * swiveling cable drum structure, clear width between the drum arms 1,700 mm - with tension lock to secure the drum at the ends of the support arms and locking of the cable drum structure to the chassis using a claw lock located in the middle * motor-hydraulic drum drive with oil motor * valves and movable rubber-coated drive rollers * hydr. Speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter as well as centering and rotating ends * 1 pair of centering cones made of polyamide, stepped * Hydraulic pump unit with diesel engine * Fuel tank and manual starter * 6.5 HP with gear pump (150 bar) * Color hot-dip galvanized * New vehicle with full manufacturer's warranty * Errors and prior sale subject to reservation * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 5,840 kg, overall weight: 8,800 kg, axle configuration: 1 axle, Year of construction: 2025, * KWH 8.8 ML: * RDÜ tire pressure monitoring * EBS brake system Ffedeu I Iq Espfx Aa Rst * Drum brake * BPW axle * Parabolic springs * Support winch at the front * Spring-supported square tube supports at the rear with base plate safety plug pins for different support heights * Drawbar with 40 mm screw eyelet (height adjustable mm) * 15-pin power plug * LED lighting * Flashing LED side marker lights * Chassis made of torsion-resistant square tubes and cross members * Closed mudguard made of sheet steel with splash guard * Closed. side impact protection can be used as advertising space * plastic tool box with floor insert (horizontal installation) approx. 500 x 350 x 400 mm * swiveling cable drum structure, clear width between the drum arms 1,700 mm - with tension lock to secure the drum at the ends of the support arms and locking of the cable drum structure to the chassis using a claw lock located in the middle * motor-hydraulic drum drive with oil motor * valves and movable rubber-coated drive rollers * hydr. Speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter as well as centering and rotating ends * 1 pair of centering cones made of polyamide, stepped * Hydraulic pump unit with diesel engine * Fuel tank and manual starter * 6.5 HP with gear pump (150 bar) * Color hot-dip galvanized * New vehicle with full manufacturer's warranty * Errors and prior sale subject to reservation * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA 18.0: * 2 in 1 = suitable for roll-off containers and as a low-loader * RDÜ (Tire Pressure Monitoring System) * EBS electronic braking system * Emergency release for spring brake cylinders * Drum brakes * 2 x 10 ton axles * Air suspension with manual lowering at the rear * Drawbar 2,000 mm long with 40 mm towing eye and adjustable height mechanism * Tool box made of powder-coated steel sheet approx. 1,000 x 300 x 600 mm, as well as a spare wheel holder in basket design on the right side * Reflective contour tape on sides and rear * Side underrun protection Ffsdpol Tq Nmjfx Aa Rot * Plastic quarter mudguards with spray protection * Rear plastic buffer guards * Foldable "A" sign at rear * LED tail lights * 15-pin electrical connector * Main frame with raised outer rails for guiding roll containers * Steel floor with roller recesses in the turntable area * Container length possible from 5,500 to 7,000 mm * Pneumatic 4-point locking clamp, plus mechanical plug-in stop angles at the front in the running track, load securing certificate according to DIN 30722-1 * Lashing package consisting of: 1 pair of 10 t UVV lashing rings at the front on the front wall beam, 3 pairs of 10 t UVV lashing rings on the side in the outer frame, 4 x 2 t clover-shaped lashing eyes per side, and 4 x 8 t recessed lashing shackles in the outer frame * Weld bead as anti-slip coating in the ramp area of the running path * Mechanical drop-down support legs at the rear * 1 pair of aluminum approach ramps (10.6 t / pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear) * Chassis, turntable, locking parts, and rear drop-down supports are hot-dip galvanized * Drawbar, axles, and air reservoir painted in a shade of black * New vehicle without initial registration, full manufacturer's warranty * Errors and prior sale excepted * Available from CW 05/2026

Condition: new, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA 18.0: * 2-in-1: suitable for roll-off containers and as low-loader * TPMS (Tire Pressure Monitoring System) * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 10-ton axles * Air suspension with manual lowering at the rear * Drawbar 2,000 mm long with 40 mm towing eye and adjustable height * Tool box made of powder-coated steel sheet approx. 1,000 x 300 x 600 mm and spare wheel holder in basket design on the right side * Contour marking tape, reflective on sides & rear * Side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear bumper pads * Foldable A-board at the rear * LED tail lights Fodpfx Ajl Tpc Aja Rjft * 15-pin electrical connector * Main frame with raised outer frame for guiding roll-off containers * Steel floor plate with roller recesses in the bogie area * Container length from 5,500 to 7,000 mm possible * Pneumatic 4-point locking system and mechanical locking angles at the front in the guide rail, load securing certificate according to DIN 30722-1 * Lashing package including: 1 pair of 10 t. UVV lashing rings at the front wall carrier and 3 pairs of 10 t. UVV lashing rings on the side outer frame, each side with 4 x 2 t. cloverleaf type lashing eyes and 4 x 8 t. lashing lugs recessed into the outer frame * Welded seam as anti-slip surface in the ramp area * Mechanical drop-down supports at the rear * 1 pair aluminum approach ramps (10.6 t/pair) 2,800 x 470 mm suitable for rubber-tyred and tracked vehicles (lockable storage compartment accessible from the rear) * Chassis, bogie, locking components, and rear drop-down supports hot-dip galvanized * Drawbar, axles, and air tanks finished in black * New vehicle without initial registration, full manufacturer warranty * Subject to errors and prior sale * Available from calendar week 05 / 2026

Condition: new, maximum load weight: 12,260 kg, overall weight: 14,400 kg, axle configuration: 2 axles, Year of construction: 2026, * TM-TA 14.4: * Wabco EBS (Electronic Braking System) * RDÜ Tire Monitoring System * Emergency Release Device for Spring Brake Cylinders * Drum Brakes * 2 x 7 ton Gigant Axles Ffodpfel Thyqsx Aa Rst * Parabolic Springs with Equalizing Unit * Jost Landing Gear at the front, 2 x externally mounted drop-down supports at the rear * Height-adjustable (±150 mm) hot-dip galvanized drawbar * Hot-dip galvanized chassis * 15-pin power connector * LED rear lights * Enclosed single plastic mudguards * Foldable A-panel at the rear * Plastic impact protection buffers on underride guard * Hot-dip galvanized underrun protection with integrated chain storage box (W = 370 mm x D = 420 mm x H = 480 mm) front left & right * 2 repositionable container stops for lateral centering of containers * Front container stops with pivoting stop, insertable in 4 positions * On each side, 2 x 5.3 t UVV lashing rings for attaching tensioning elements * Axles, springs, air tanks, and landing gear painted in black * Errors and prior sale excepted * New vehicle with manufacturer's warranty * Available from calendar week 05 / 2026

Condition: new, maximum load weight: 12,260 kg, overall weight: 14,400 kg, axle configuration: 2 axles, Year of construction: 2026, * TM-TA 14.4: * incl. 2 ratchet tensioners permanently mounted on the outer frame with chain box * eyes on both sides and quick-shortener in Y-special design, 6.3 t * Tensioning force with load securing certificate * Wabco EBS * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with compensating unit * Jost landing gear at the front * 2 external drop-down support legs at the rear * Height-adjustable hot-dip galvanized drawbar +/- 150 mm * Hot-dip galvanized chassis Fjdpfx Aepk Dyxja Rjft * 15-pin power connector * LED tail lights * Closed, single plastic mudguards * Foldable A-sign at the rear * Plastic collision protection buffer on the underrun protection * Hot-dip galvanized underrun protection with integrated chain storage box, W = 370 mm x D = 420 mm x H = 480 mm, front left & right * 2 repositionable skip stops for lateral centering of skips * Skip stops at the front, can be inserted in 4 positions with pendulum-stop feature * On each side, 2 x 5.3 t UVV lashing rings for attaching tensioning elements * Axles, springs, air tanks and landing gear painted in black tone * Subject to errors and prior sale * New vehicle with manufacturer warranty * Available from c/w (calendar week) *

Condition: new, maximum load weight: 10,360 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-ER 14.4: * RDÜ (Tire Pressure Monitoring System with in-cab display via EBS signal, no truck-side installation required) * Electronic Braking System (EBS) * Emergency release system for spring brake cylinders * Drum brakes * Gigant axles * Air suspension with lift and lowering function * Drawbar height adjustable by 300 mm * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox, front right, mounted externally on front wall * Side underride protection * Plastic quarter mudguards * LED lighting system * 15-pin power connector * Hot-dip galvanized chassis, drawbar, front and rear wall * 50 mm softwood floor * Provisions for retrofitting 20" container locks at the front and rear * Bolted smooth sheet steel front wall * Side walls made of trapezoidal-profiled steel sheet, foldable with drop-side spring assist * Bolted, hot-dip galvanized rear stanchions Fedendpn Sepfx Aa Rsft * Perforated outer frame approx. 45° bent, with 2 t lashing points every 480 mm, possibility to install 3 t fold-down lashing rings every 600 mm; each front and rear corner with 1 x 6.3 t lashing ring; various holes for 1.2 t lashing points in the front and rear crossmembers * 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles, storage compartment recessed under the loading area within the chassis at the rear * Vehicle hot-dip galvanized * New vehicle with manufacturer's warranty * Subject to error and prior sale * Immediately available from Egestorf