Used Müller-Mitteltal T Trailers for sale (237)

Condition: new, overall weight: 24,000 kg, maximum load weight: 18,900 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, * TRA-Kombi 24.0: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * RDÜ (tire pressure monitoring system) * Drum brakes * 3 x 11 ton Gigant axles * Air suspension with manual. Lowering at the rear * Liftable center axle, * Pneumatically lowerable scissors 2,100 mm long with 50 mm towing eyelet & height adjustment device * Toolbox made of powder-coated sheet steel and spare wheel holder in basket design on the right side * Reflective contour band on the side & rear * Side impact protection * Plastic quarter fender with splash guard * Plastic impact protection buffer at the rear * LED tail lights * 15-pin power plug Cob Hlepk D Awsqh Nogt * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding the roll containers * Sheet steel floor with roller recesses in the bogie area * Cont. length of 5,500 - 7,000 mm possible for roll container transport * Pneumatic 4-way clamp locking and mech. plug-in stop angles at the front of the tracks * Loading certificate according to DIN 30722 - 1 * Transport of up to 2 skips with a maximum volume of 10 m³ possible * 8 removable trough stops for lateral centering of the troughs, 4 front trough stops plugged in with a swinging stop * 3 pairs of 10 ton UVV lashing rings on the side for hanging tensioning elements for positive and non-positive securing of the troughs * 4 lashing bars in cloverleaf design (on the side) and 1 pair of 13.4 ton UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Welded bead as anti-slip coating in the track area of the ramp * mech. Fall supports at the rear * 1 pair of aluminum landing ramps (16 tons / pair) 2,800 x 400 mm suitable for rubber-tired and tracked vehicles (lockable storage compartment at the rear) * Tires 235/75 R17.5 * Driving height when loaded approx. 1003 mm * Payload 18,900 kg * Gross vehicle weight of 27,000 kg technically possible * Axles, turntable, towing scissors and air tank painted in a black tone * New vehicle without first registration with manufacturer's warranty * Errors and prior sale subject to reservation * Available from week 23/2025

Condition: new, overall weight: 19,000 kg, maximum load weight: 14,600 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, Equipment: ABS, tail-lift, * Müller? Mitteltal ETÜ-TA-R 19 Plateau - low loader? Tandem trailer with ramps * NEW VEHICLE without registration, available beginning of July 2025 (please pre-order) * Leasing, financing, trade-in, delivery to your yard possible ---- Inquiry No. 18615 (sample photos) * GVW: 19t, NL: 14.60t * Bolted front wall made of smooth sheet metal (hot-dip galvanized) * Bolted rear stanchions (hot-dip galvanized) * Loading area made of 50mm thick softwood flooring, 6.27m x 2.47m * Front fixture for retrofitting container locks * Lashing and Safety Package: * 4 UVV lashing rings, LC 8000daN, mounted to the existing hole pattern in the 45° outer frame, recessed in the cross member at the front and rear * 2 pairs of LC 10,000daN, recessed in the cross member at the front and rear, lowerable * Perforated outer frame (45° folded with hole pattern for lashing devices), lashing force per lashing point LC 2000 daN at a minimum spacing of 480 mm. * Additional 10 UVV-compliant lashing brackets (LC 3000 daN) recessed into the existing hole pattern in the outer frame. * Additional lashing options via holes (Ø 50 mm, LC 1,200 daN) in the front and end beams. * Toolbox in front of the front wall included. Cgjb Hlewbl R Dsqh Nst * Ramps: one-piece with hot-dip galvanized gratings in anti-slip design. * 2 UVV folding supports at the rear. * LED lighting. * 2 additional LED reversing lights on the rear. * Flashing LED side marker lights * Chassis and drawbar (hot-dip galvanized) * Parabolic springs, 235/75 R17.5 (8 tires) with tire pressure monitoring system * EBS 2S/2M and spring-loaded parking brake * Drawbar with offset plate (+77/-33mm) without height adjustment and 50mm towing eye * Hardwood excavator bucket storage on the bulkhead * 1 LED warning light at the rear (removable) ----Trade-in / financing / hire purchase with/without down payment / residual value possible, e.g., for 72 months. e.g., €480 / month We are a MüllerMittelt trading partner! ----Our Opening Hours Mondays - Thursdays: 8:00 AM - 5:00 PM Fridays: 8:00 AM - 3:00 PM Outside of opening hours, we are available by appointment. We speak German, we speak English, we speak Polish, we speak French.

Condition: used, overall weight: 13,000 kg, maximum load weight: 8,620 kg, axle configuration: 2 axles, loading space volume: 28 m³, loading space length: 5,680 mm, loading space width: 2,440 mm, loading space height: 2,080 mm, first registration: 04/1995, Equipment: tail-lift, * 9444 - Vehicle ID for telephone inquiries * Type: EAL-TA-P * Leaf suspension, drum brakes, front support winch, height-adjustable drawbar * Kappler beverage case, swivel wall over roof, locking beam for rear load securing * Bear tail lift 1,500 kg, TH: 2.15 m, own batteries * 1st axle tires: 275/70R22.5 ( 8 / 15 mm ) * Tires 2nd axle: 275/70R22,5 ( 4 / 3 mm ) ----our e-mail address: our service for you: - Procurement of short-term or customs license plates - Transfer / delivery EU-wide - Customs clearance of vehicles to third countries Yesli u vas yest' voprosy na russkom yazyke, vy mozhete pozvonit' po sleduyushchemu nomeru * WhatsApp just for russian speakers: * Whatsapp for english, german and other languages: Cob Hlqhou T Ag Ao Nogt

Condition: used, overall weight: 11,900 kg, empty load weight: 3,100 kg, maximum load weight: 8,800 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, first registration: 04/2018, suspension: steel, tire size: 235/75R17.5, color: yellow, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2-axle, tandem, leaf spring suspension, ABS (anti-lock braking system), lashing eyes, under-tubing, front and rear outriggers, pendulum tailgates, height-adjustable drawbar. Construction: Tandem tipping trailer with loading ramps. Currently rated at 10,000 kg, can be increased to 11,900 kg. Galvanized frame, Gigant axles, drum brakes! Loading height approx. 950 mm! Loading ramps available for an additional charge of €1,000.00 net! ACCESSORIES INFORMATION WITHOUT GUARANTEE, subject to change, prior sale, and errors! Cgjb Hlqhowa Dwyj Net - .

Condition: used, axle configuration: 2 axles, Year of construction: 2000, = Additional options and accessories = - Air suspension at the rear - Air suspension at the front = Notes = Tandem tipping trailer, steel three-way tipper, internal dimensions approx. 5,000 x 2,330 x 900 mm, side walls swinging with central locking, rear side wall swinging with automatic opening. SAF axles, tires 385-65R22.5, ABS, air suspension. Two-speed support winch at the front, towing eye 50 mm, 1-wire hydraulic, 2-wire air, 24 volts. Gross vehicle weight 18,000 kg, payload 13,400 kg. Chassis gray, body green. = More information = Empty weight: 4,600 kg Payload: 13,400 kg GVW: 18,000 kg Front tires: 385-65R22.5 Rear tires: 385-65R22.5 Country of production: DE Cgjb Hlqhovppdfe Njt Contact Jan-Marc Schwickert for more information.

Condition: new, overall weight: 30,000 kg, maximum load weight: 24,020 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2025, * T3 Profi 30.0: * EBS brake system * RDÜ tire pressure monitoring * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 ton Gigant axles * Parabolic springs, mechanical axle compensation at the rear * Side impact protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front axle closed plastic fender and rear axle straight galvanized. Sheet steel aprons each with splash guard * Reflective contour tape on the side and rear * Tool box made of galvanized sheet steel - black powder-coated - approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for the tool box in the bogie platform * Multi-voltage system * LED tail lights * Rotating beacon (removable) at the rear Cjb Hlqhsl Th I Ae Nogt * Pull scissors with 50 mm pull eye and height adjustment via tension spring & turnbuckle * 15-pin power plug * 4 stanchion pockets on each side (but no stanchions present) with simultaneous lashing option * La-Si package consisting of: 2 lashing eyes (6.4 tons) at the front left & right on the main frame of the bogie platform, 6 pairs of UVV lashing rings that can be swiveled and lowered, can be loaded in all directions and embedded in the outer frame - in the corners 13.4 tons. otherwise 10 tons. * 6 pairs of mech. Folding boom for 3 m total width (but not in the rear slope), * Widening planks placed in the middle of the loading area * Hot-dip galvanized one-piece hydraulic loading ramps (approx. 3,000 x 720 mm), mechanically laterally adjustable * 4-way control block for retrofitting the hydraulic. Side ramp shift * Loading area above the turntable: approx. 1,960 x 2,520 mm * Loading height unloaded approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Loading height unloaded approx. 910 mm (incl. 860 mm approach slope) * Chassis, bogie, scissors and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in a black tone * 235/75 R 17.5 twin tires * Approx. 5,980 kg empty weight * Gross vehicle weight of 30,000 kg technically possible * New vehicle with manufacturer's warranty * Errors and prior sale subject to change * Available immediately from week 20/2025

Condition: new, overall weight: 11,900 kg, maximum load weight: 8,770 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, Equipment: ABS, tail-lift, * Müller-Mitteltal ETÜ-TA-R 11.9 Low-Loader Tandem Trailer/Ramps * NEW VEHICLE without EZ, * immediately available * RAL 7016 Anthracite Inquiry No.: 11491 * GVW: 11.9t, NL: 8.77t * Reinforced and certified body according to EN 12642 XL including load securing certificate * 6.27m x 2.47m x 0.4m laser-welded, foldable steel side walls, 2 spring jacks * Bolted end wall made of smooth sheet metal (hot-dip galvanized) * Rear wall: (hot-dip galvanized) inserted in front of the ramps with empty brackets behind the end wall Cgsb Hlovym Tlsqh Nst * Bolted rear stanchions (hot-dip galvanized) * 50mm thick softwood floor. * 4 x UVV lashing rings LC 6300 daN recessed in the front and rear cross members, * 10 x UVV lashing brackets LC 3000 daN recessed in the existing hole pattern in the outer frame * Ramps: one-piece with hot-dip galvanized gratings in anti-slip design * Device for retrofitting container locks in front of the bulkhead * Plastic toolbox in front of the bulkhead * Chassis and drawbar (hot-dip galvanized) * 235/75 R17.5 (4 tires), parabolic springs, BPW axles, with tire pressure monitoring * EBS 24 Volt * Height-adjustable drawbar (hot-dip galvanized) with 40 mm drawbar eye * 2 LED reversing lights on the rear of the trailer * LED lighting system for 12 and 24 Volts * Side marker lights with Turn signal control * 1 removable rotating LED beacon (hazard warning light) including bracket and installation---- * Financing through our cooperation partners * Hire-purchase example from our cooperation partner FM LeasingPartner: €485 per month net for a 60-month term with no down payment and €0 remaining. Other terms with or without down payment/residual value are possible. Request a quote from us! * We are a MüllerMitteltal trading partner!---- * Our opening hours * Mondays - Thursdays: 8:00 a.m. - 5:00 p.m. * Fridays: 8:00 a.m. - 3:00 p.m. * Outside of opening hours, we are available by appointment. * We speak German, we speak English, ????? ?? ????? ?????, we speak Polish, we speak French

Condition: new, overall weight: 14,400 kg, maximum load weight: 10,950 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2024, * ETÜ-TA-ER 14.4 Plateau: * RDÜ (tire pressure monitoring) * EBS (electronic braking system), * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 ton BPW axles * Air suspension with lifting and lowering system * mechanically adjustable 3 mtr. Warning sign packages at the front and rear * Drawbar height adjustable by 300 mm with 40 mm flange drawbar eye * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (thus B dimension of approx. 8,080 mm) * Support winch at the front * External folding supports at the rear * Plastic tool boxes approx. 750 x 350 x 300 mm on the left and right sides * Side impact protection * Underrun protection * Plastic quarter fender * 15-pin power plug * LED lighting system 12 / 24 V * 2 additional LED reversing lights. at the rear (switched via reverse gear) * 1 LED rotating beacon (removable incl. holder) at the rear * 50 mm softwood floor * 2 pairs of container locks (extendable to 3 mtr. Cont. external width) and lockable * Locking dimension pushed in according to ISO - DIN 15190 = 2,259 mm. Cont. locks pulled out = 2,819 mm (this dimension is not according to DIN) with an absolute external width of 3,000 mm * Perforated external frame bent at approx. 45 degrees with 2 ton. lashing force every 480 mm, installation of 3 ton. drop lashing brackets every 600 mm possible - 5 x 3 ton. UVV lashing brackets installed on the sides -, 1 x 6.3 ton in the corners at the front and rear. Lashing ring (at the front directly behind the cont. locks in the wooden floor and at the back in the end beam) in the front and end beam various holes for 1.2 ton lashing option * 1 pair of aluminum slide-in ramps approx. 3,570 x 410 mm (load capacity 10 ton / pair) suitable for rubber-tired and tracked vehicles Cgob Hlqhom Tgxwe Nst * storage compartment below the loading area in the chassis from the rear * ---Chassis, drawbar, front wall, underrun protection and rear supports hot-dip galvanized--- * Axles, air tank, front support winch and flange drawbar eye painted in a black tone * New vehicle with manufacturer's warranty * Errors and prior sale subject to reservation * Available immediately from Egestorf on the A7

Condition: new, overall weight: 21,000 kg, maximum load weight: 16,600 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, Year of construction: 2025, Equipment: ABS, tail-lift, Müller-Mitteltal ETÜ-TAR 21 Tandem Low Loader - Drive-over Platform Trailer NEW VEHICLE including COC * Gross vehicle weight: 21 t, NL: 16.60 t, galvanized chassis * Available from April 25, 2025 * Platform version with 400 mm high bulkhead, ramp secured by ramp support rods and inclined supports * 21 t gross vehicle weight version. Reinforced frame and axle, and axle spacing 1,810 mm, * Floor height approx. 910 mm loaded / approx. 940 mm unloaded * 7,000 mm loading area with 400 mm high bulkhead, * Extended ramps: 3,000 mm hot-dip galvanized, one-piece ramps with hot-dip galvanized gratings, * Ramp jack with vertical, adjustable springs for easy one-person operation * La-Si package: 4 UVV-compliant drop lashing brackets (LC 8,000 daN) mounted to the existing hole pattern in the 45° outer frame (approx. 5 mm protruding), arrangement: each indented approx. 1,000 mm from the front and rear beams * 10 UVV-compliant 3,000 daN lashing brackets, retractable into the existing hole pattern in the outer frame, * Softwood floor, 50 mm. Two UVV-compliant lashing rings each, recessed into the cross member at the front and rear, with a LC of 10,000 daN. * Additional lashing options are provided through holes (Ø 50 mm, LC of 1,200 daN) in the front and rear beams. * Device for retrofitting container locks * Gigant air suspension including EBS 2S/2M * Lifting and lowering * 235/75R 17.5 (8-piece) twin tires with tire pressure monitoring sensor * 1 plastic toolbox in front of the bulkhead, on the right side in the direction of travel * LED lighting system * 7-pin socket on the rear side, used for overlength lighting with taillight (58 R) and ground * 2 LED reversing lights at the rear * Flashing side marker lights Cjb Hlqjvw Hvzjh Negt * Warning sign for overwidth * 1 removable rotating LED beacon including bracket and installation * Folding outriggers at the rear, support leg at the front with geared winch * ---- Rent-purchase example from our cooperation partner MMV Leasing: €639 per month net for a 60-month term with no down payment and €0 remaining Other terms with / without down payment / Residual value possible! We are a MüllerMitteltal retail partner ----* Our opening hours * Mondays - Thursdays: 8:00 AM - 5:00 PM * Fridays: 8:00 AM - 3:00 PM * Outside of opening hours, we are available by appointment * We speak German, we speak English, we speak Polish, we speak French * Leasing, financing, and trade-in are available

Condition: new, overall weight: 19,000 kg, maximum load weight: 14,200 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 400 mm, * ETÜ-TA-R 19.0: * Wabco EBS-E (electric braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 11 tonnes Gigant axles * Air suspension * Drawbar with 50 mm flanged drawbar eye and height adjustment by 110 mm via offset plate * Jost landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm on the right side * Side impact protection * Plastic quarter fender * 15-pin power connector * LED lights * Reinforcement package for drilling rig transport on the chassis Cgobol Tp Azj Hlqh Njt * 50 mm clamped softwood floor * Device for retrofitting control locks in front of the bulkhead * Bolted bulkhead made of smooth sheet metal * Divided side walls made of trapezoidal sheet steel, foldable with a folding stanchion in the center * Steel rear wall that can be inserted between the ramps - holder inside in front of the bulkhead when not in use * Bolted rear stanchions * Perforated outer frame, approximately 45 degrees bent with 2 tons of torque. Lashing capacity every 480 mm * Installation of 3-ton drop lashing rings possible every 600 mm * Lasi package: 1 x 10-ton UVV-compliant lashing ring in the front and rear corners, 2 x 8-ton UVV-compliant lashing rings on each side, retractable in the outer frame, various holes in the front and end beams for 1.2-ton lashing capacity * One-piece mechanical Grating loading ramps with spring mechanism for one-person operation, approx. 3,000 x 620 mm (collapsible up to 20 mm) * Rear approach slope approx. 860 mm * Chassis, drawbar, bulkhead, tailgate, folding supports, and loading ramps hot-dip galvanized * Axles, air chamber, flanged drawbar eye, and landing gear painted in a single black tone * Loading height unloaded approx. 940 mm * Loading height loaded approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Side walls painted in RAL 9010 pure white * Side walls painted in a single RAL color available for an additional charge * New vehicle with manufacturer's warranty * Errors and prior sale subject to change * Available for immediate delivery from Egestorf on the A7

Condition: new, overall weight: 14,400 kg, maximum load weight: 10,360 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-ER 14.4: * RDÜ (tire pressure monitoring with display option in the truck via EBS signal without truck-side installation) * electronic braking system EBS * emergency release device for spring-loaded cylinders * drum brakes * 2 x 5.5 ton. Gigant axles * Air suspension with lifting and lowering system * Height-adjustable drawbar by 300 mm * Jost support winch at the front * External hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right on the outside of the bulkhead * Side impact protection * Plastic quarter fender * LED lighting system * 15-pin power plug * Hot-dip galvanized chassis as well as drawbar, bulkhead and rear wall * 50 mm softwood floor Cjb Hlqepk D Dqeh Nsgt * Device for subsequent installation of 20" cont. locks at the front and rear * Screwed bulkhead made of smooth sheet metal * Side walls made of sheet steel - trapezoidal profile - foldable with side wall spring lifter * Hot-dip galvanized rear stanchions screwed * Perforated outer frame bent at approx. 45 degrees with 2 ton lashing force every 480 mm, installation of 3 ton lashing brackets every 600 mm possible, 1 x 6.3 ton lashing ring in the front and rear corners, various holes in the front and end beams for 1.2 ton lashing option * 1 pair of aluminum docking ramps approx. 3,310 x 400 mm (load capacity 8 ton / pair) suitable for rubber-tired and tracked vehicles, storage compartment below the loading area in the chassis from the rear * Vehicle hot-dip galvanized * New vehicle with manufacturer's warranty * Errors and prior sale subject to reservation * Available from week 19/2025 from Egestorf

Condition: new, overall weight: 14,400 kg, maximum load weight: 10,900 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: * RDÜ (tire pressure monitoring) * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 tonnes Gigant axles * Air suspension * Drawbar height adjustable by 300 mm - Drawbar extension by 250 mm to 2,250 mm * Jost landing gear at the front * LED taillights * External hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right, outside the bulkhead * Side impact protection * Plastic quarter fenders * Hot-dip galvanized chassis as well as drawbar, bulkhead, rear wall, tailgate, and loading ramps * 50 mm softwood floor * Device in front of the bulkhead for retrofitting container locks * Bolted bulkhead made of smooth sheet metal * Trapezoidal steel side walls, foldable with side wall spring lifter * Steel rear wall can be inserted between the ramp brackets inside the bulkhead when not in use * Bolted rear stanchions * Perforated outer frame, angled at approx. 45 degrees with 2 ton load capacity Lashing capacity every 480 mm, installation of 3-ton drop lashing rings possible every 600 mm, 1 x 6.3-ton lashing ring in each of the front and rear corners, various holes in the front and end beams for 1.2-ton lashing capacity. * One-piece mechanical grating loading ramps with spring mechanism for one-person operation, approx. 2,750 x 600 mm (can be collapsed to within 20 mm) * Rear approach slope approx. 860 mm * --Reinforced and certified body according to EN 12642 XL including load securing certificate-- * Side wall color in RAL 9010 pure white * Side walls can be painted in a RAL color for an additional charge * New vehicle with manufacturer's warranty Ceb Hloq Dyvyjqh Nogt * Errors and prior sale subject to change * Available from week 18/2025

Condition: new, overall weight: 30,000 kg, maximum load weight: 23,500 kg, axle configuration: 3 axles, loading space length: 8,380 mm, loading space width: 2,520 mm, Year of construction: 2024, * PT 30 profile: * EBS (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 tonne Gigant axles * Air suspension with lifting and lowering system and RtR valve * Smart board mounted on the trailer as an information tool (for axle load display - front and rear separately) * Tire pressure monitoring with display option in the truck via EBS signal without truck-side installation * Side impact protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front plastic quarter fender with splash guard * Rear straight galvanized. Sheet steel aprons with splash guard * Reflective contour tape on the side and rear * 15-pin power plug * LED lighting 12/24 V * LED rotating beacon (removable) at the rear * Pull scissors 1,200 mm long with 40 mm pull eye and height adjustment via tension spring & turnbuckle * Tool box made of galvanized sheet steel approx. 650 x 300 x 600 mm, black powder-coated on the right side * Box in the bogie for accessories with hinged lid, 2 cont. locks permanently installed (directly after the bogie platform) * ROBOT welded ANTI-SLIP coating on the steel plate of the bogie platform (protruding weld beads) * La-Si package consisting of: 2 lashing eyes (13.4 tonnes) at the front left & right on the bulkhead support, front & rear 1 pair of UVV lashing rings (13.4 to.) and 3 pairs of UVV lashing rings (10 to.) on the side, swiveling and lowerable, loadable in all directions and embedded in the outer frame, 3 stake pockets on the side with simultaneous 2 ton lashing option * 6 pairs of mechanical folding booms for 3 m total width (but not in the rear slope) * Widening planks placed in the middle of the loading area * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm * Mechanically laterally adjustable * 4-way control block for later retrofitting of hydraulic. Ramp shift Cgjb Hlqstplwieh Njt * Chassis, bogie, folding boom, drop supports and ramps hot-dip galvanized * Axles, slewing ring, air tank, drawbar painted in a black tone * Loading edge when loaded approx. 910 mm +/- 20 mm air suspension, * New vehicle with manufacturer's warranty * Errors and interim purchase subject to reservation * Available for immediate delivery from Egestorf

Condition: new, overall weight: 27,000 kg, maximum load weight: 20,200 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, Year of construction: 2024, * ETÜ-TR 27.0 Plateau: * EBS (electric braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 9 ton. BPW Eco axles * Air suspension with lifting and lowering system with RTR function * 1st axle can be lifted Csbsr Dpzxj Hlqh Njgt * Last axle as trailing steering axle with electro-pneumatic steering lock through PIN reverse gear (locking of the trailing axle from the chassis for maneuvering purposes - without installation on the truck side - assigned to PIN 10 in the 15-pin plug connection only for maneuvering purposes, not on public roads * SmartBoard control box as an information tool with pressure sensors for total axle load display * Tire pressure monitoring with display option in the truck via EBS signal without installation on the truck side * Fixed center drawbar with 50 mm flange drawbar eyelet (loaded 900 mm, mm height adjustment on head plate) * Mechanical support winch at the front, mechanical swivel supports at the rear of the chassis * Mechanically adjustable warning sign package at the front and rear * Tool boxes made of galvanized sheet steel - black powder-coated - approx. 650 x 300 x 600 mm on the right side * 15-pin power plug * LED tail lights * LED rotating beacon (removable) including holder and installation * 2 x LED reversing lights on the rear of the vehicle (switched via reverse gear) * Flashing LED side marker lights * 60 mm larch/Douglas fir floor * 400 mm steel bulkhead plugged in * Perforated outer frame bent at approx. 45 degrees with device for mounting 3 tonne drop lashing brackets * 1 x 10 tonne lashing ring in each corner and 2 x 10 tonne and 3 x 6.3 tonne lashing rings on each side * Various holes in the front and end beams for 1.2 tonne lashing option * Hydraulic one-piece loading ramps approx. 3,000 x 720 mm, mechanically adjustable laterally * 4 hydraulic. Control block for possible retrofitting of hydraulic ramp shifting * Chassis, drawbar, bulkhead, mechanical rear supports, loading ramps hot-dip galvanized * Axles, air tank, flange drawbar eyelet and support winch at the front painted in a black tone * --Preparation for possible retrofitting of side walls-- * New vehicle with manufacturer's warranty * Errors and prior sale without reservation * Available immediately from Egestorf

Condition: new, overall weight: 14,400 kg, maximum load weight: 10,800 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 tonnes Gigant axles * Parabolic springs with compensating unit * Drawbar height adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm * Tire pressure monitoring with display option in the truck via EBS signal - no truck-side installation required * Front landing gear * External folding supports at the rear * 15-pin power connector Cgob Hlqhjrwc R Ro Net * 12/24 V LED lighting system * EBS multi-voltage system for towing vehicles with 12 and 24 V electrical systems * Plastic toolbox approx. 858 x 500 x 500 mm, front right outside on the bulkhead * Side impact protection * Plastic quarter fenders * 50 mm softwood floor * Device for retrofitting control locks in front of the bulkhead * Bolted 400 mm bulkhead made of smooth sheet metal * Bolted rear stanchions * Side walls with Spring jack * Perforated outer frame, approximately 45 degrees angled, with a 2-ton lashing capacity every 480 mm, installation of 3-ton drop lashing brackets possible every 600 mm, 1 x 6.3-ton lashing ring in each of the front and rear corners, various holes in the front and end beams for 1.2-ton lashing capacity * One-piece hydraulic grating loading ramps, approximately 2,750 x 600 mm (can be collapsed to within 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck of over 40 liters/min. up to a maximum of 140 liters/min.) * Chassis, drawbar, front wall, mechanical Hot-dip galvanized drop legs and ramps * Axles, springs, air chamber, front landing gear, and flanged towing eye painted in a black shade * Side walls painted in RAL 9010 pure white * Side walls painted in a RAL color available for an additional charge * New vehicle with manufacturer's warranty * Errors and prior sale subject to change * Available from week 15 of 2025 * Sample images

Condition: new, overall weight: 48,000 kg, maximum load weight: 37,430 kg, axle configuration: 3 axles, Year of construction: 2024, * TS 3 RM ML 30.0: * Wabco-EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 ton BPW axles * Air suspension with lifting and lowering system and RtR valve * Starting aid for maneuvering purposes switched to the first axle via EBS (without installation on the truck side) * Smart board mounted on the trailer as an information tool with pressure sensors for displaying the total axle load * Last axle as a trailing steering axle with electro-pneumatic steering lock * Trailing axle locked by the driver. for maneuvering purposes switched via EBS (without truck-side installation) * 2nd kingpin position 2 * side impact protection, support winches at the front and swivel supports at the rear of the chassis * 15-pin power plug * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * 2 additional LED reversing lights Cgjb Hoq Euakjlqh Net * 7-pin socket on the rear side for extra-long lighting * Side marker lights with indicator control * Tire pressure monitoring with display option in the truck via EBS signal (without truck-side installation) * mech. adjustable warning sign packages at the front and rear * straight sheet steel mudguards * spare wheel holder in front of the bulkhead cross member (without spare wheel) * saddle platform with 45° bevelled front corners and front tool box made of galvanised powder-coated sheet steel W = 2,480 x H = 500 x L = 665 mm with hinged lid * 400 mm aluminium side walls (in the desired RAL colour) on the side of the saddle platform, foldable and removable * rear wall -150 mm- high * rear slope on the saddle platform to the low bed approx. 700 mm long with checker plate covering and a perforated strip at the end for hanging aluminium docking ramps * saddle platform with 50 mm clamped wooden planks and low-loading platform with 60 mm clamped wooden planks * tear plate over the axles * 9 x mechanical folding extensions to 3 mtr. Total width but not in the rear slope (widening planks available with closed storage compartment across the direction of travel under the loading area) * 3 slots under the saddle platform for storing optional aluminum ramps or wooden planks for wheel well cover * Swivel arm as a support for connecting cables from the truck to the trailer * LaSi package consisting of: outer frame perforated on the saddle platform, bent at 45° with hole pattern for lashing devices (2 tonnes lashing force per lashing point at a distance of at least 480 mm * 3 x 13.4 tonnes lashing rings sunk into the ground on each side (1 x on the saddle platform, 1 x on the longitudinal beams after the bend and 1 x above the middle axle next to the longitudinal beam) * 3 x 13.4 tonnes lashing rings on each side on the outer frame (1 x start of the saddle platform bend, 1 x start of the ramp, 1 x end of the ramp) * 2 x 10 ton lashing rings on each side (1 x between the front wheel recess and 1st axle and 1 x between the 2nd and 3rd axle) * 3 x 5 ton lashing rings screwed to the outer frame of the wheel recesses (2 on the front and 1 on the rear wheel recesses) * extended excavator boom support from the end of the last rigid axle over the steering axle to the end support with internal reinforcement profile approx. W = 770 mm x D rear = 270 / depth front 170 mm, 2 x 6.4 ton lashing rings on each side in the excavator boom support * 2 wheel recesses on each side, 390 mm deep and 640 mm wide for transporting wheel loaders with a wheelbase of 3,000 - 3,590 mm with a tire diam

Condition: new, overall weight: 40,000 kg, maximum load weight: 31,000 kg, axle configuration: > 3 axles, loading space length: 9,290 mm, loading space width: 2,520 mm, loading space height: 950 mm, * PT 40.0 profile: * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 4 x 11 tonne Gigant axles * Air suspension with lifting and lowering system and RtR valve * Manometer pressure indicator for determining load weight (axles separated into 2 air suspension circuits) Cgeb Hel Tlhrslqh Not * Side impact protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front plastic quarter fender with splash guard * Rear straight galvanized. Sheet steel aprons with splash guard * Reflective contour tape on the side and rear * EBS multi-voltage system with 12 & 24 V electrics * 15-pin power plug * LED lighting system 12 / 24 V * LED rotating beacon (removable) at the rear * 2 LED reversing lights (switched via reverse gear) * Pull scissors with 50 mm pull eye and height adjustment * Tool box made of galvanized sheet steel, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high * Front section in front of the bogie platform approx. 490 mm long with 45° corners * ROBOT welded ANTI-SLIP coating for the steel plate of the bogie platform * La-Si package consisting of: in front of the front wall support on the left & right 1 x 13.4 ton each. UVV lashing eye, 4 holes on each side in the bogie platform with a lashing force of 2 tons each, 1 pair of lashing eyes (13.4 tons) hanging at the rear left and right in front of the rear carrier, 4 pairs of UVV lashing rings (10 tons) on each side, can be swiveled and lowered, can be loaded in all directions and embedded in the outer frame, 3 stake pockets on each side with a simultaneous 2 ton lashing option * Hot-dip galvanized mechanical folding boom for a total width of 3 meters (but not in the rear slope) * Plank holder for widening under the chassis on the left in the longitudinal direction * Excavator boom storage above the rear axle to the end carrier approx. 2,100 mm long and approx. 190 mm deep, 2 pairs of 6.4 tons on each side. Lashing rings in the excavator boom storage * Hardwood floor on the running surfaces of the low-loading platform * Hydraulic one-piece ramps (approx. 3,000 x 720 mm) mechanically laterally adjustable * Outer planks of the ramps made of hardwood * Steel construction in preparation for 6-way control slide * Loading edge unloaded approx. 950 mm +/+ 20 mm chassis * Bogie, folding boom, mechanical drop supports, ramps hot-dip galvanized * --Axles, air tank, pull scissors painted in a black tone-- * Tires 235/75 R 17.5 * Vehicle has a daily registration in 07/2024, due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Errors and prior sale subject to reservation * Available for immediate delivery from Egestorf

Condition: new, overall weight: 30,000 kg, maximum load weight: 23,500 kg, axle configuration: 3 axles, Year of construction: 2024, Equipment: ABS, * T 3: * ABS braking system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 ton BPW Eco axles * Parabolic springs * Mechanical axle compensation at the rear * Lateral impact protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front axle closed plastic mudguards and rear axle straight galvanized. Sheet steel aprons each with splash guard * Reflective contour tape on the side and rear * Hinged lid (hot-dip galvanized) for the toolbox in the bogie platform * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm - black powder-coated - on the side under the chassis * 15-pin power plug * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * Pull scissors with 40 mm pull eye and height adjustment via tension spring & turnbuckle * 4 stake pockets on each side (but no stakes available) with simultaneous lashing option * La-Si package consisting of: 2 lashing eyes (6.4 tons) at the front left & right on the main frame of the bogie platform * 5 pairs of UVV lashing rings that can be swiveled and lowered * Can be loaded in all directions and embedded in the outer frame in the corners 13.4 tons. otherwise 10 tons * 6 pairs of mechanical folding booms for 3 mtr. total width (but not in the rear slope) * Widening planks stored in a storage compartment under the loading area * Excavator boom storage above rear axle to the end beam approx. 2,100 mm long (2 pairs of 6.4 ton lashing rings on the side in the excavator boom storage) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip section and load holding valves, hydraulic lateral ramp shifting * Hydraulic. Flow divider in the trailer (with hydraulic pump output in the truck of over 40 liters to max. 140 liters / min.), two-line hydraulics * Loading area above the turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm, (incl. 860 mm approach slope) * Loading height when loaded approx. 860 mm +/- 30 mm compensation unit * Chassis, bogie, folding boom, rear drop supports and loading ramps hot-dip galvanized. * Axles, springs, pull scissors, air tank etc. painted in a black tone * New vehicle with manufacturer's warranty * Errors and prior sale subject to reservation Cgob Hleq Dyv Ieqh Nst * Available immediately from Egestorf

Condition: new, overall weight: 30,000 kg, maximum load weight: 16,400 kg, axle configuration: 3 axles, Year of construction: 2024, * T3 profile 30.0: * EBS-E (electronic braking system) * RDÜ tire pressure monitoring * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 ton BPW Eco axles * Air suspension with lifting and lowering system * SmartBoard as an information tool on the trailer with pressure sensors for pressure display for total axle load display for each axle group * Side impact protection * Mechanically adjustable warning sign packages at the front and rear * Front axle closed. Plastic fenders and rear straight galvanized sheet steel aprons, each with splash guard * Hinged lid (hot-dip galvanized) for the tool box in the bogie platform * Tool box made of galvanized sheet steel approx. 650 x 300 x 600 mm (black powder-coated) on the right side * 15-pin power plug * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear Cgjb Hlqhsq Dyvce Njt * Side marker lights with indicator control * Pull scissors with 40 mm pull eye and height adjustment via tension spring & turnbuckle * Tire pressure monitoring system with display option in the truck via EBS signal (without truck-side installation) * Rubber covering on the folding ramps and on the ramp on the left and right (approx. 860 mm long) * Rubber covering on the longitudinal beams from the front to the end beam * Hardwood floor on the running surfaces of the low-loading platform * 4 stake pockets on each side with a simultaneous 2 ton. Lashing option * La-Si package consisting of: 5 pairs of UVV lashing rings that can be swiveled and lowered, can be loaded in all directions and are embedded in the outer frame - 13.4 tons in the corners, otherwise 10 tons * 6 pairs of mechanical folding booms for 3 m total width (but not in the rear slope) * Plank holder under the loading area in the longitudinal direction * Roller stop raised in front of the front beam with 1 x 6.4 ton lashing eye on each side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip section and load holding valves * Hydraulic lateral ramp shifting * Hydraulic rear support (single-stage cylinder) * Hydraulic. Flow divider in the trailer (with hydraulic pump output in the truck of over 40 liters up to max. 140 liters/min.) * Hydraulic control block splash-proof * Two-line hydraulics * Loading area above the turntable: approx. 1,960 x 2,520 mm, * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loading height when loaded approx. 890 mm +/- 20 mm air suspension * Chassis, bogie, roller stop, folding extensions & ramps hot-dip galvanized. * Axles, turntable, pull scissors, air tank etc. painted in a black tone * Loading height when loaded: approx. 890mm +/- 20mm * New vehicle with manufacturer's warranty * Errors and prior sale subject to reservation * Available for immediate delivery from Egestorf

Condition: new, overall weight: 14,400 kg, maximum load weight: 12,260 kg, axle configuration: 2 axles, Year of construction: 2025, * TM-TA 14.4: * including 2 ratchet tensioning cables permanently mounted on the outer frame with chain case * on both sides with eyelet and quick shortener in Y-special design 6.3 ton * clamping force with Lasi certificate * Wabco EBS * RDÜ tire control monitoring system * emergency release device for spring-loaded cylinders * drum brakes * 2 x 7 ton Gigant axles * parabolic springs with compensation unit * Jost support winch at the front * 2 x external drop supports at the rear * height-adjustable +/- 150 mm hot-dip galvanized drawbar * hot-dip galvanized chassis * 15-pin power plug * multi-chamber tail lights * closed. Plastic single fender * Foldable A-shield at the rear * Plastic impact protection buffer on the underrun protection * Hot-dip galvanized collision protection with integrated chain storage box W= 370 mm x D= 420 mm x H= 480 mm front left & right * 2 removable trough stops for centering the troughs sideways * Trough stops at the front with swinging stop that can be plugged into 4 positions, * 2 x 5.3 ton UVV lashing rings on each side for hanging tensioning elements Cgjb Hjpk Dyxolqh Net * The axles, springs, air tank and support winch are painted in a black tone * Errors and prior sale subject to change * New vehicle with manufacturer's warranty * Available from week 20/2025

Condition: new, overall weight: 14,400 kg, maximum load weight: 12,080 kg, axle configuration: 2 axles, loading space length: 3,900 mm, loading space width: 1,920 mm, loading space height: 415 mm, Year of construction: 2022, Equipment: ABS, tail-lift, * ETM-TA 14.4: * Wabco ABS braking system * Emergency release device for spring-loaded cylinders * Drum brakes, 2 x 7 tonnes. Gigant axles * Parabolic springs with tandem compensation unit * Height-adjustable drawbar (+/- 150 mm) with 40 mm screw drawbar eye * Jost support winch at the front, side impact protection * Foldable A-plate at the rear * 15-pin power plug, multi-chamber tail lights * Fixed steel front and side walls * Plug-in steel rear wall * Floor made of 50 mm softwood * 1 sliding plate support 750 x 1,000 mm in the front area including 2 trough stops at the front that can be plugged into 2 positions * 4 reversible trough stops that can be plugged into 2 positions for laterally centering the troughs Cob Hlqeq Euareh Negt * 1 x (13.5 ton) UVV lashing ring on each side for hanging tensioning elements * 2 ratchet tensioners (spindle adjustment) with compensation chain and quick shortener (tension force 6,300 kg) * Rear cross member for attaching aluminum ramps including 2 additional rear fall supports * Loading edge unloaded approx. 710 mm * Chassis, bulkhead, side walls, fender, drawbar, rear fall supports hot-dip galvanized * the axles, springs, support winch, air tank painted in a black tone * Tires: 285/70R19.5, wheelbase: 1,140 mm * Loading edge unloaded: approx. 710 mm, sold without container * Color hot-dip galvanized * Vehicle has a daily registration in 06/2024, due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer warranty * Errors and prior sale subject to reservation * available immediately from Egestorf on the A7

Condition: new, overall weight: 14,400 kg, maximum load weight: 12,260 kg, axle configuration: 2 axles, Year of construction: 2025, * TM-TA 14.4: * including 2 ratchet tensioning cables permanently mounted on the outer frame with chain case * on both sides with eyelet and quick shortener in Y-special design 6.3 ton * clamping force with Lasi certificate * Wabco EBS * RDÜ tire control monitoring system Csbopk D D Rj Hlqh Nogt * emergency release device for spring-loaded cylinders * drum brakes * 2 x 7 ton Gigant axles * parabolic springs with compensation unit * Jost support winch at the front * 2 x external drop supports at the rear * height-adjustable +/- 150 mm hot-dip galvanized drawbar * hot-dip galvanized chassis * 15-pin power plug * multi-chamber tail lights * closed. Plastic single fender * Foldable A-shield at the rear * Plastic impact protection buffer on the underrun protection * Hot-dip galvanized collision protection with integrated chain storage box W= 370 mm x D= 420 mm x H= 480 mm front left & right * 2 removable trough stops for centering the troughs sideways * Trough stops at the front with swinging stop that can be plugged into 4 positions, * 2 x 5.3 ton UVV lashing rings on each side for hanging tensioning elements * The axles, springs, air tank and support winch are painted in a black tone * Errors and prior sale subject to change * New vehicle with manufacturer's warranty * Available from week 20/2025

Condition: new, overall weight: 14,400 kg, maximum load weight: 12,260 kg, axle configuration: 2 axles, Year of construction: 2025, * TM-TA 14.4: * Wabco EBS * RDÜ tire control system * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 ton Gigant axles * Parabolic springs with compensation unit * Jost support winch at the front, 2 x external support legs at the rear * Height-adjustable +/- 150 mm hot-dip galvanized drawbar Cgjb Hsl Th Hzelqh Not * Hot-dip galvanized chassis15-pin power plug * Multi-chamber tail lights * Closed. Plastic single fender * Foldable A-shield at the rear * Plastic impact protection buffer on the underrun protection * Hot-dip galvanized collision protection with integrated chain storage box W= 370 mm x D= 420 mm x H= 480 mm front left & right * 2 removable trough stops for centering the troughs sideways * Trough stops at the front with pendulum stop that can be plugged into 4 positions * 2 x 5.3 ton UVV lashing rings on each side for hanging tensioning elements * The axles, springs, air tank and support winch are painted in a black tone * Errors and prior sale subject to reservation * New vehicle with manufacturer's warranty * Available immediately from week 20/2025 * Sample images

Condition: new, overall weight: 14,400 kg, maximum load weight: 12,260 kg, axle configuration: 2 axles, Year of construction: 2025, * TM-TA 14.4: * Wabco EBS * RDÜ tire control system * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 ton Gigant axles * Parabolic springs with compensation unit * Jost support winch at the front, 2 x external support legs at the rear Ceb Hlqhel Thyqj Nogt * Height-adjustable +/- 150 mm hot-dip galvanized drawbar * Hot-dip galvanized chassis15-pin power plug * Multi-chamber tail lights * Closed. Plastic single fender * Foldable A-shield at the rear * Plastic impact protection buffer on the underrun protection * Hot-dip galvanized collision protection with integrated chain storage box W= 370 mm x D= 420 mm x H= 480 mm front left & right * 2 removable trough stops for centering the troughs sideways * Trough stops at the front with pendulum stop that can be plugged into 4 positions * 2 x 5.3 ton UVV lashing rings on each side for hanging tensioning elements * The axles, springs, air tank and support winch are painted in a black tone * Errors and prior sale subject to reservation * New vehicle with manufacturer's warranty * Available immediately from week 20/2025 * Sample images

Condition: new, overall weight: 18,000 kg, maximum load weight: 14,000 kg, axle configuration: 2 axles, loading space length: 7,120 mm, loading space width: 2,470 mm, Year of construction: 2023, * TM 2 18.0: (for 2 skips) * EBS (electrical braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake connection * 2 x 10 ton BPW axles * Air suspension with automatic lowering when the brake is uncoupled * Pneumatically lowering drawbar with pneumatic release * 2,100 mm long drawbar with 40 mm drawbar eyelet and height adjustment via tension spring & turnbuckle * 2 x 7-pin power plugs * Multi-chamber tail lights * Closed. side impact protection as advertising space (painted in RAL 3002 carmine red) * Plastic toolbox approx. 858 x 500 x 500 mm rear right * Storage box for cont. nets made of galvanized perforated sheet metal approx. 1,000 x 500 x 500 mm side left * Foldable parking warning sign, reflective, rear left * Foldable underrun protection * Plastic fender * Waterproof glued 30 mm screen-printed floor * Front cross member with 2 fixed trough stops * 8 removable trough stops for laterally centering the troughs * 2 sliding sheet supports approx. 750 x 1,000 mm * Trough stops at the front and rear with swinging stop (permanently welded at the front, adjustable lengthwise at the rear for 2nd trough) * 4 ratchet tensioning cables permanently mounted on the outer frame with chain case, compensation chain with eyelet on both sides and a quick shortener in Y-special design (clamping force 6,300 kg), with Dekra LaSi certificate * Loading height approx. 1,030 mm +/- 20 mm tolerance due to the air suspension chassis, * Underrun protection hot-dip galvanized * Bogie, axles, air tank and pull scissors painted in a black tone * Vehicle has a daily registration in 06/2024, due to missing tire pressure monitoring system and was not loaded/used * New vehicle with manufacturer warranty * Errors and prior sale subject to reservation Cob Hljl Tpbpeqh Nsgt * Available immediately from Egestorf on the A7