Trailer with working platform

MÜLLER-MITTELTAL 14,4 to, Tand - Plateau- Tieflader, hydr. Rampen

Condition: new, maximum load weight: 10,800 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic leaf springs with equalising unit ----Drawbar / Flange Tow Eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm ----Electrics / Lighting: * Tyre pressure monitoring with display option in the truck via EBS signal - no installation required on the truck side * 15-pin power connector * LED lighting system 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Support winch at the front * Rear external folding supports * Plastic toolbox approx. 858 x 500 x 500 mm mounted front right on the bulkhead exterior * Side underrun protection * Plastic quarter mudguards ----Low Loader Deck: * 50 mm softwood flooring * Preparation in front of the bulkhead for subsequent fitting of container locks * Bolted, 400 mm smooth-sheet bulkhead * Bolted rear stanchions Gbodpfx Asrwc R Ash Tst * Side panels with spring assist ----Load Securing: * Perforated outer frame, bent approx. 45 degrees, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing rings every 600 mm * 1 x 6.3 t lashing point each in the front and rear corners * Various drilled holes in the front and rear cross members for 1.2 t lashing options * Profifix lashing rail centrally in the longitudinal axis for lashing up to LC 3000 daN ----Ramps: * One-piece hydraulic mesh loading ramps approx. 2,750 x 600 mm (can be pushed together up to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck over 40 ltr./min. up to 140 ltr./min. max) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical drop legs, and loading ramps hot-dip galvanised * Axles, springs, air tanks, front support winch, and flange tow eye painted in a black tone * Side panels painted in RAL 9010 pure white * Painting of side walls in any RAL colour available at extra cost ----Info: * New vehicle with manufacturer’s warranty * Errors and prior sale reserved * Sample images ----Delivery time: * Available immediately ex Egestorf

Condition: new, functionality: fully functional, machine/vehicle number: A10916, empty load weight: 759 kg, maximum load weight: 2,741 kg, overall weight: 3,500 kg, axle configuration: 3 axles, Year of construction: 2026, Scope of delivery: 1x Construction machinery trailer, tridem machine transporter with ramp 400x180cm 3500kg Description: With the Martz construction machinery trailer (Tridem), you are investing in uncompromising stability and maximum reliability. This robust transport trailer has been specially designed to meet the demanding requirements of the construction industry and effortlessly handles the transport of excavators, wheel loaders, and heavy equipment. Thanks to the welded steel frame and an impressive payload of 2,741 kg, this trailer ensures your machines reach every job site safely and efficiently. Massive design: The fully welded steel frame and the extremely durable phenolic plywood floor guarantee maximum durability, even under daily use in the toughest construction site conditions. Tridem running gear (3 axles): The rubber suspension axles, combined with the 3-axle system, provide optimal weight distribution and extremely smooth handling, even at maximum load (3,500 kg gross vehicle weight). Thought-out loading system: The high folding, continuous loading ramp is fitted with shock absorbers and integrated ramp supports. This allows for ergonomic operation and safe, stable loading of machinery. Practical details: An integrated shovel holder on the V-drawbar, walk-on anti-slip coated side sections, an automatic jockey wheel, and sturdy lashing eyes make securing and loading efficient for everyday use. Technical data: - Braked - Tridem - Automatic jockey wheel - Wheel chocks with holders - Shovel holder - Lashing eyes - Walk-on side sections with anti-slip coating - Folding ramp with ramp support - Shock absorbers on the ramp Gross weight: 3,500kg Unladen weight: 759kg Payload: 2,741kg Gbodozacv Topfx Ah Tet Load area length: 4,000mm Load area width: 1,822mm Overall width: 2,420mm Overall length: 6,011mm Overall height: 1,820mm Manufacturer: Martz Connector type: 13-pin Trailer type: Construction machinery transport Number of axles: 3 axles Type of suspension: Rubber suspension axle Drawbar type: V-drawbar Wheel position: underneath the loading platform Floor: Phenolic plywood Trailer type: Construction machinery trailer Frame type: Welded Frame material: Steel Intended use: Transporting construction machinery (excavators, wheel loaders, etc.) Shock absorbers: No (optional: €290 surcharge for 100km/h upgrade) We can gladly send you the vehicle documents in advance free of charge if you choose 'collection by customer'!

Condition: used, mileage: 116,000 km, power: 375 kW (509.86 HP), first registration: 02/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Full service history ---- ----* MAN EasyStart roll-away protection * Air suspension, front axle * Air suspension, rear axle * Anti-lock braking system (ABS) * Emergency brake assist (EBA) * Retarder * Electronic Stability Program (ESP) * Disc brakes * Full emergency brake assist * MAN AttentionGuard driver fatigue warning system * Electric sun blind, one-piece * Stand-alone air conditioning system, electric * Battery master switch * Lane departure warning system (LDW) * Transparent external sun visor * Heated rearview mirrors * Exterior mirrors electrically adjustable and heated * Air horns, cab roof * Cab roof and side spoilers * Electric window lifters for driver and passenger doors * GX cab – the maximum (wide, long, extra high) * Electrically adjustable mirrors, driver and passenger side * Central locking with remote control * Immobilizer (transponder) * Automatic transmission * MAN Idle Speed Driving gearbox function * MAN TipMatic 14 27 DD transmission with retarder * Automatic climate control * Auxiliary hot water heater * Driver’s seat heating * 6-cylinder engine * 480-litre fuel tank * 80-litre AdBlue tank * 480-litre fuel tank * Fog lights * Headlamp cleaning system * Engine version Euro 6, E * Engine version with AdBlue * Air-suspended driver’s seat * Cornering light * High beam assist * Lower bunk * Upper bunk Gjdpfxox Iafve Ah Tebt * Adaptive cruise control (ACC) with stop-and-go function * Driver comfort package * Electric roller blind for windscreen * Refrigerator in drawer under bed * EBS * Without spare wheel ----Sale exclusively to businesses! No guarantee for the information provided! Subject to prior sale! Only our general terms and conditions apply! We will gladly provide you with a lease or financing offer.

Condition: new, empty load weight: 735 kg, maximum load weight: 2,765 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,500 mm, loading space width: 1,820 mm, loading space height: 250 mm, total length: 5,520 mm, total width: 2,420 mm, suspension: other, tire size: 195/50R13C, trailer brake: trailer braked, Temared Builder 3 3518S 3500 kg ALUMINUM PANEL FLOOR Construction machinery transporter with lattice ramp - NEW VEHICLE - Technical data: Permissible total weight 3500 kg Unladen weight approx. 735 kg Payload approx. 2765 kg Internal dimensions of the box 350 x 182 x 25 cm Overall dimensions 552 x 242 x 182 cm (LxWxH) Tires 195/50R13C Loading height approx. 37 > At an extra cost, model 4018S/2 with aluminum floor (loading area 400 x 180 cm) is also available! Equipment and construction: Frame and platform frame welded, hot-dip galvanized Excavator bucket rest on the drawbar as standard V-drawbar, support wheel standard Overrun brake with automatic reversing, handbrake maintenance-free rubber suspension axles Side panels made of solid steel, welded Gbjdjzi R U Uepfx Ah Tst Walkable side panels, full box length, with integrated hole pattern Aluminum panel floor Extendable lashing eyes in the floor frame on the side Continuous lattice ramp with lifting aid (New: gas spring, the spring shown in some images is no longer used!) Ramp support integrated into the ramp 12V electrical system, 13-pole plug, reversing light Multi-lights mounted protected in the side frame Additional lights mounted protected in the front frame incl. German vehicle registration document and COC Optional accessories: Spare wheel under the excavator bucket rest Lashing straps Theft protection etc. (please inquire) ! See many more trailers at >>> trelex.de ! * Financing and trade-in possible! * Huge selection: Over 300 trailers constantly in stock, come and visit us! * Competent and fair advice, fast processing. * Questions? Just call! ATTENTION: Immediate pickup not possible without prior order!

Condition: new, maximum load weight: 10,760 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders ----Axles: * 2 x 7-ton Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange coupling: * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange coupling ----Lighting / Electrical: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General components: * Jost front support legs * Outboard hot-dip galvanized folding support legs at the rear * Plastic tool box on the front right, outside on the front wall * Lateral impact protection * Plastic quarter fenders ----Low-bed platform: * 50 mm hardwood flooring * Provision in front of the front wall for subsequent installation of container locking mechanisms Gbedpfjxglibox Ah Tjt * Bolted front wall made of smooth sheet metal * Steel sheet metal side walls - trapezoidal profile - foldable with sideboard spring lifter * Steel rear wall can be slid in between the ramps - bracket for storage when not in use inside the front wall * Rear cross members bolted on ----Load securing: * Perforated outer frame angled at approx. 45 degrees with 2-ton lashing force every 480 mm * Installation of 3-ton lashing eyes possible every 600 mm * 1 x 6.3-ton lashing eye at each front and rear corner * Various holes in the front and end cross member for 1.2-ton lashing ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be slid together to 20 mm) * Approach angle at the rear approx. 860 mm ----Painting: * Hot-dip galvanized chassis as well as drawbar, front wall, ramps, and rear wall * Sideboard color in RAL 9010 pure white * Painting of the side walls in a RAL color possible at an extra charge ----Information: * Reinforced and certified body according to EN 12642 XL incl. load securing certificate * New vehicle with manufacturer's warranty * Errors and prior sale reserved ----Delivery time: * Available from approx. week 41/2026