Three-way tipper trailer

MÜLLER-MITTELTAL 14,4 to Tand- Tiefl mit 2- Seitenkipper

Condition: new, maximum load weight: 10,400 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * ETK-TA-R 14.4: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with tandem equalizing unit * Tire pressure monitoring with display option in the truck via EBS signal without in-truck installation required * Height-adjustable drawbar (300 mm adjustment range) with 40 mm flange towing eye * Mechanical support winch at the front * Two mechanical folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * 15-pin power connector * Multi-chamber tail lights Bsdpstr St Hjfx Ahzewg * Bolted underrun protection * Plastic quarter mudguards * Net hooks located laterally and rear in the central locking mounts, plus 2 on the front wall * Main frame made from fine-grain steel * Steel pallet/2-way tipper body with fixed smooth sheet steel front panel, continuous side panels—foldable without central stakes, equipped with drop-side spring lifters and capable of pendulum function via manual central locking * Rear posts bolted * Steel rear wall slid in front of ramps * Lashing points: 1 x 5 t in each corner, plus 4 x 3 t lashing rings recessed laterally in the outer frame * 4 mm floor made of fine-grain steel * Two-piece mechanical grating ramps with aluminum end piece, 2,150 + 1,300 mm x 600 mm (can be manually reduced to 80 mm width) * Chassis, drawbar, rear posts, underrun protection, mechanical drop supports, and loading ramps are hot-dip galvanized * Axles, springs, air tanks, flange towing eye, and support winch painted in black * Drop sides and body in RAL 9010 pure white * Side walls and tipper body can be painted in any RAL color for an additional charge * New vehicle with manufacturer warranty * Subject to prior sale and errors excepted * Available from calendar week 07/2026

Condition: new, maximum load weight: 7,500 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 5,035 mm, loading space width: 2,420 mm, loading space height: 500 mm, total width: 2,550 mm, total height: 1,475 mm, Year of construction: 2025, Equipment: ABS, * Humbaur three-way tipper * HTK 10 50 24 * Year of manufacture 2025 * Total weight: 10,500 kg * Payload: 7,500 kg * Empty weight: 3,000 kg * Overall dimensions: 6,960 x 2,550 x 1,475 * Bridge dimensions: 5,035 x 2,420 x 500 * Steel side walls: 500 mm high Bjdpfsqnrtaex Ahzswg * Continuously height-adjustable drawbar * 10 recessed lashing rings * 2 rear supports * Electric and compressed air connections on the drawbar * Storage shaft with 2 aluminum ramps in the chassis frame * 8 ton ramps surcharge 1,499 euros ATTENTION !!!!! MUST READ !!!!! We expressly reserve the right to sell the item prior to purchase, as we also offer this item on other portals. We strongly recommend viewing and testing the item so that the buyer does not have any false impressions about the condition and suitability. Viewings and testing are possible at any time by appointment and are expressly desired!!! Images are similar, may contain accessories for which an additional charge is required. The internal dimensions given are approximate. TRADE POSSIBLE FOR ALMOST EVERYTHING!!! EXCHANGES AND PAYMENTS POSSIBLE!!! Exhibition site: 58285 Gevelsberg, Am Sinnerhoop 17 Opening times: Monday - Friday 8:30 a.m. to 5:00 p.m., Saturday 8:30 a.m. to 2:00 p.m. Over 500 new and used trailers always in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: new, maximum load weight: 10,400 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * ETK-TA-R 14.4: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 ton Gigant axles * Parabolic springs with tandem equalizing unit * Tire pressure monitoring with display option in the truck via EBS signal, no truck-side installation required * Drawbar adjustable in height by 300 mm with 40 mm flange towing eye * Mechanical landing gear at the front * Rear: 2 mechanical folding supports * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * 15-pin electrical connector * Multi-chamber tail lights * Bolted underrun protection * Plastic quarter mudguards * Net hooks on the side and rear in the central locking mounts, as well as 2 pieces on the front wall * Main frame made of high-tensile steel * Steel pallet - 2-way tipper superstructure: front wall fixed and made of smooth sheet, continuous side walls foldable without central stanchions, with drop-side lifting support and swinging via manual central locking * Rear stanchions bolted * Steel rear wall slid in front of the ramps * At each corner: 1 x 5 ton lashing point, and 4 x 3 ton lashing rings recessed into the outer frame on each side * 4 mm floor made of high-tensile steel * Two-piece mechanical grid ramp with aluminum tip: 2,150 + 1,300 mm x 600 mm (manually retractable to 80 mm) Bedpetr Sucjfx Ahzowg * Chassis, drawbar, rear stanchions, underrun protection, mechanical drop supports, and ramps hot-dip galvanized * Axles, springs, air tanks, flange eye, and landing gear painted black * Side panels and platform in RAL 9010 pure white * Painting of the side panels and tipping body in a RAL color of choice available at extra cost * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from CW 07/2026

Condition: new, maximum load weight: 5,600 kg, overall weight: 7,500 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 2,030 mm, loading space height: 400 mm, total width: 2,200 mm, total height: 1,400 mm, Year of construction: 2025, * Humbaur HTK 754020 * Three-way tipper * New vehicle * Tandem chassis * Year of manufacture: 2025 * Total weight: 7500kg * Empty weight: 1900kg * Payload: 5600kg * Overall dimensions: 6040mm x 2200mm x 1400mm * Internal dimensions: 4000mm x 2030mm x 400mm * Loading height: 920mm * Steel side walls can be folded down and removed at the sides and rear * Swinging rear side wall with central locking * Height-adjustable drawbar approx. 590mm - 930mm * Torsion spring units and parabolic suspension * Integrated receiving shaft for loading ramps * 4-stage telescopic cylinder * Single-circuit hydraulic connection * Floor plate made of 4mm sheet steel * 3 a few recessed lashing points * Pneumatic brake with ALB / ABV ATTENTION !!!!! MUST READ !!!!! We expressly reserve the right to sell the item prior to purchase, as we also offer this item on other portals. Bodpfx Aottfm Hehzewg We strongly recommend a viewing and inspection so that the buyer does not have any false impressions about the condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly desired !!! Images are similar, may contain accessories for which an additional charge is required. The internal dimensions given are approximate. TRADE-IN POSSIBLE FOR ALMOST EVERYTHING !!! EXCHANGES AND PAYMENTS POSSIBLE !!! Exhibition grounds: 58285 Gevelsberg, Am Sinnerhoop 17 Opening times: Monday ? Friday 8:30 a.m. to 5:00 p.m., Saturday 8:30 a.m. to 2:00 p.m. Always over 500 new and used trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax:

Condition: new, machine/vehicle number: ebf3f771e96394cd89e56bbb7, overall weight: 11,800 kg, axle configuration: 2 axles, tire size: 235 / 75 r 17,5, Further information Chassis central axle trailer Welded fine-grained steel construction 6 pairs of lashing eyes bolted to the outside of the floor/outer frame, 5 tons each 2 pairs of lashing eyes additionally bolted to the floor, 5 tons each in the corners Gear support foot at the front Folding rear support 2 wheel chocks with holder Steel underride guard Rear spray flaps across the entire width Quarter-shell mudguards 1 plastic tool box, with shelf, w=620/h=360/t=440 mm, lockable with a padlock. (lock not included in scope of delivery) Towing device central axle trailer Towing bar with tested 40 mm towing eye Height-adjustable drawbar via spindle, max. adjustment range 300 mm Axles + suspension Drum brake axles, manufacturer's choice Axle/chassis laser-measured Reduction in tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Bwjdpfx Aji Rixrohzjg Wheels and tires 235 / 75 R 17,5 manufacturer's choice Factory silver steel rims Brake system 2-line compressed air brake system Hand spindle parking brake Integral air reservoir 2 non-interchangeable coupling heads at the front, with connecting cables to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear 2 x 7-pin interchangeable plugs at the front, with connecting cable, Floor Steel/ checker plate floor for high point load capacity Note: Slight floor corrugation possible due to welding distortion! Platform length approx. 5,200 mm Rear sloping to approx. 900 mm Front wall / front corner stanchions 25 mm aluminum hollow profile, 400 mm high, Drop sides 25 mm aluminum hollow profile, 400 mm high, foldable and removable Rear wall / rear corner stanchions 1 pair of steel stanchions attached to the frame and with bracket for locking the drive-on ramps, drive-in width approx. 2,430 mm Drive-on ramps 2 steel ramps 2,300 mm long, 510 mm wide, can be moved sidewayswith grab handle on the ramps covered with 3 toothed steel rails With gas pressure jack for one-man operation Country of registration/plates Country of registration: Germany 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white on the sides and red on the rear Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Front wall aluminum Side wall anodized aluminium Drive-on ramps Hot-dip galvanized Attention! These are archive pictures.

Condition: used, Year of construction: 2022, operating hours: 2,820 h, power: 162 kW (220.26 HP), Equipment: front power take-off, onboard computer, FASTRAC 4220 (0010) JCB Fastrac 4220 (0020) Engine Manufacturer: Sisu (0030) Number of Engine Cylinders: 6 (0040) Transmission Model: ML180HD (0050) Ball Head Coupling (K80) (0060) Heating (0070) Performance Monitor (0080) Air-Suspended Seat (0090) Rotating Beacon (0100) Power Shuttle (0110) Swinging Drawbar (0120) Four-Wheel / All-Wheel Steering (0130) ISOBUS (0140) Automatic Tow Hitch – Truck type (0150) Height-Adjustable Hitch (0160) Return Line Hydraulic Connection (Pressureless) (0170) External Controls for 3-Point Linkage (0180) External Operation of Hydraulic Valves Bedow D Ib Djpfx Ahzswg (0190) External Operation of Front PTO (0200) External Operation of Rear PTO (0210) Hydraulic Top Link (Rear) Engine: 6 cyl. A509 Pro Line Germany.422 (0250) Transmission: B504 AGCO ML180, 60 km/h (0260) PTO: 4-speed electro-hydraulic (0280) Hydraulics: EHR with position control (0290) Controls: D500 4 spool valves rear, 1 spool valve front (0310) Specification: Front linkage (FKH), central front PTO (FZW) (0320) Ladder axle with HC200, track width 2,000 mm (0340) 80 mm Ball Head Coupling (0350) Duomatic Air Coupling (0360) & Air Connections, Ladder Axle (0370) Oversize Marking (0380) Fixed Panoramic Roof Window (0390) With Adjustable Sun Visor (0400) Threaded Plates for Front Loader Attachment (0420) Wheel Chocks for Machines with Rear Weight (0440) Preparation for Trimble Steering System (0450) Additional ISOBUS Front Socket R30 IF (0470) Rear View Camera

Condition: new, empty load weight: 907 kg, maximum load weight: 2,130 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 350 mm, loading space volume: 2.2 m³, color: other, construction height: 1,260 mm, working width: 1,930 mm, Manufacturer: Humbaur Type: 3-sided tipper HTK Alu 3000.31 Perm. total weight: 3000 kg Weight: 3000 kg Payload: 2130 kg Unladen weight: 870 kg Box dimensions: 3140 x 1750 x 350 mm Tires: 13 inch Loading height: 750 mm Loading area hydraulically tiltable with hand pump and electric pump Tipping angle rear 42, side 50 with leaf grid attachment/steel grid attachment 600 mm high, 4-sided swinging - V-drawbar hot-dip galvanized - Chassis and tipper body hot-dip galvanized - Tipper body made of steel, made from one piece - 4-stage hard-chrome plated tipping cylinder - Hand pump, from 3000 kg perm. weight electric pump with hand pump, from 3000 kg perm. weight electric pump with hand pump, from 3000 kg perm. weight electric pump with hand pump. electric pump with hand pump - 13-pin plug and reversing light - 350 mm high aluminum drop sides, completely removable - rear flap can be swivelled - 6 tie-down rings mounted on the bridge floor, tensile force 800 kg per tie-down ring, Dekra tested - jockey wheel - plank shaft as preparation for aluminum planks for easy retrofitting Price incl. Vehicle registration certificate (registration certificate part II and COC papers) We have a large number of trailers from the following manufacturers in stock: Brenderup Humbaur Hapert Brian James Trailers Unsinn and Neptun On request, we can provide you with a free transfer license plate. We repair trailers from all manufacturers. Further accessories on request. Technical changes, price changes and errors excepted. No liability is assumed for errors and misprints.automatic reverse drive, rubber spring axle, independent suspension, tiltable loading area, support wheel, marker lights, chassis and tipper body hot-dip galvanized, braked, incl. warranty, V-drawbar hot-dip galvanized, tipper body made of steel, made of one piece, 4-stage hard-chrome-plated tipping cylinder, hand pump, from 3000 kg permissible total weight, electric pump with hand pump. Electric pump with hand pump, 13-pin plug and reversing light, 350 mm high aluminum drop sides, completely removable, rear flap can be swivelled, 6 tie-down rings mounted on the bridge floor, tractive force 800 kg per tie-down ring, Dekra tested, plank shaft as preparation for aluminum planks for easy retrofitting Bwodpfsktm Sujx Ahzeg

Condition: used, maximum load weight: 8,750 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 06/2024, total width: 2,550 mm, Year of construction: 2023, Müller Mitteltal KA-TA-R 11.9 tandem 3-way tipper with lots of extras. Total weight: 11,900kg Standard payload approx.: 8,750kg Clear dimensions: 5,000x2,420x500mm Tires: 385/55R19.5 4-layer paintwork, single color Wheels: silver Chassis/underbody protection: hot-dip galvanized Platform with bulkhead: hot-dip galvanized Axles/springs/fuel tank etc.: black Side and rear wall: RAL 2011 deep orange Reinforced and certified structure in accordance with EN 12642 XL including load securing certificate. (Only in conjunction with 500mm high steel side walls). Rear stanchions screwed, hot-dip galvanized, without top coat. Lashing points LC 5,000 daN recessed at the front. Net hooks integrated at the side and rear in the bearings of the central locking system to the base side wall and 2 additional pieces on the front wall. BPW axles instead of GIANT tipping platform with permanently attached front wall in hot-dip galvanized design, with screwed, galvanized rear stanchions, without additional coating (not with HARDOX floor). Due to the system, the formation of waves during hot-dip galvanization, especially with the large floor panel, cannot be ruled out; complaints in this regard are excluded from the warranty. Tires 385/55R19.5 instead of 235/75R17.5 (floor and coupling height + approx. 110 mm, Code 08.940 ramp length 3,570 mm required). 1 plastic tool box, black, lockable, W=750xH=350xD=300mm (45kg payload with even load), arrangement: on the chassis frame on the right in the direction of travel. 1 pair of aluminum docking ramps without fairway (8 t/pair), 3,570x400x105mm, suitable for rubber-tired and tracked vehicles, 55 kg/each. Two-step access in front of the front wall, on the left in the direction of travel (hot-dip galvanized). Extended connecting lines for agricultural and forestry tractors. Bsdpfx Asvy Tvtshzjwg Further information New: No

Condition: new, maximum load weight: 8,750 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,030 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2025, Equipment: ABS, * Drum brakes * Storage compartment for ramps * Aluminium ramps, load capacity 8,000 kg per pair on request, price: 1,800 euros net * Frame completely hot-dip galvanized * 10 lashing eyes on the loading area * Loading height approx. 990 mm * Height-adjustable tow arm * Side walls spring-supported * Trailer immediately available * Suspension: leaf * Payload: 8,750 kg * Tires: 235/75R17.5 ----Information non-binding - errors not excluded - sale reserved Bsdswdcg Ijpfx Ahzjwg

Condition: new, maximum load weight: 10,870 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2023, Equipment: ABS, * KA-TA-R 14.4: Bwedpfsl Th Duex Ahzog * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 ton Gigant axles * Parabolic springs with tandem equalizer unit * Drawbar height adjustable by approx. 300 mm with 40 mm flange towing eye * Jost mechanical landing gear at the front * Two mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm, mounted at the front on the right side of the chassis * 15-pin power connector * Multi-chamber tail lights * Bolt-on underride guard * Plastic quarter mudguards * Net hooks at each position of the central locking and 2 hooks on the front wall * Chassis made of fine-grain steel * Steel pallet 3-way tipping body, continuous side walls at the top with internal pipe reinforcement - without central stanchions, foldable with drop-side spring lifter * Rear stanchions bolted * Combo steel swing doors at the rear, 2-wing asymmetrically split, can be swiveled and locked to 270° - not foldable - with additional pendulum frame for automatic tailgate opening during tipping process, locking via galvanized rotary bar lock at the rear and central locking, deactivation function for automatic tailgate during reverse tipping with opened swing door * Each corner with 1 x 5 ton lashing point and 4 x 3 ton lashing rings recessed into the outer frame on each side * 4 mm steel sheet floor made of fine-grain steel * Rear mounting rail for loading ramps * Reinforced body with load securing certificate * 1 pair of aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 tons per pair) suitable for rubber-tired & tracked vehicles * Lockable storage compartment from the rear recessed under the loading area in the chassis for the ramps * Chassis, drawbar, underride guard, rear stanchion, rear folding supports hot-dip galvanized * Axles, springs, air tank and landing gear painted black * Tires 285/70 19.5 * Side walls painted in RAL 9010 pure white * Painting of the side walls in a different RAL color available at extra cost * Vehicle has a day registration (unused) * Errors and prior sale excepted * Immediately available from Egestorf