Low loader trailer

MÜLLER-MITTELTAL 14,4 to. Tandem Tieflader mit Auffahrrampen

Condition: new, maximum load weight: 10,900 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: * Tire pressure monitoring system (RDÜ) * Electronic braking system (EBS) * Emergency release device for spring brake cylinders * LED lighting * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with equalizer assembly * Drawbar height adjustable by approx. 300 mm * Drawbar extension by 250 mm to 2,250 mm * Jost landing gear at the front Fodpfjxglibsx Ahyjgk * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox mounted front right, outside on the bulkhead * Side underrun protection * Plastic quarter mudguards * Hot-dip galvanized chassis and drawbar * Bulkhead * Rear wall * Tailgate and loading ramps * 50 mm softwood floor * Preparation in front of the bulkhead for retrofitting container locks * Bolted bulkhead from smooth sheet metal * Side walls made from trapezoidal profiled steel sheet, foldable, with drop-side lifting assistance * Steel rear wall, can be inserted between ramps (storage bracket for when not in use inside at the front bulkhead) * Bolted rear posts * Perforated external frame, approx. 45° angled, with 2 t lashing capacity every 480 mm, installation of 3 t folding lashing rings every 600 mm possible, 1 x 6.3 t lashing ring in each front and rear corner, various bores for 1.2 t lashing options in front and rear cross members * One-piece mechanical mesh loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm) * Rear approach angle approx. 860 mm * --Enhanced and certified body according to EN 12642 XL including load securing certificate-- * Drop-side color in RAL 2011 deep orange * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from KW 46 / 2025 * Sample images

Condition: used, power: 54.5 kW (74.10 HP), fuel type: diesel, color: yellow, Year of construction: 2000, operating hours: 2,826 h, Equipment: all wheel drive, cabin, pallet forks, Off-road telescopic arm forklift JCB, type: 535 - 95 4x4x4, first use: 2001, LIFTING FORCE: 3,500 kg, LIFTING HEIGHT: 9.50 m, 4-cylinder PERKINS diesel engine (type: 1906/2200 - 74.12 HP / 54.50 kW at 2.200 rpm), LOADING FORKS, QUICK CHANGER, ADDITIONAL HYDRAULIC, ALL-WHEEL and ALL-WHEEL STEERING (4x4x4) - DOG DRIVE, SIDEBALANCE REGULATION, CPB, OVERLOAD WARNING DEVICE, ROPS / FOPS, trailer coupling, large cab (colored glass), WORKING LIGHTS (front), traffic lights, comfort seat, windscreen wiper (3x), exterior mirrors (2x), WARNING LIGHTS, heating/ventilation, holding and transport eyes. Tires: All-terrain tires (15.5 /80 - 24) - approx. 98 % all-round. Transport dimensions: Length: approx. 6,200 mm (approx. 5,100 mm without forks), width: approx. 2,270 mm, height: approx. 2,470 mm. ∗∗∗ FINANCING POSSIBLE / TRANSPORT FAVORABLE (WORLDWIDE) / FOR EXPORT ONLY THE NET PRICE IS TO BE PAID (!) ∗∗∗∗ © pb - - - - - - - - - - - - - - - Rough terrain telescopic forklift JCB, type: 535 - 95 4x4x4, first use: 2001, LIFTING FORCE: 3.500 kg, LIFTING HEIGHT: 9.50 m, 4-cylinder PERKINS diesel-engine (type: 1906/2200 - 74.12 hp / 54.50 kW at 2.200 rpm), FORKS, QUICK CHANGER, ADDITIONAL HYDRAULIC, 4-WHEEL-DRIVE-SYSTEM and ALL-WHEEL-STEERING (4x4x4) - CRAB STEERING (dogway), CPB, SIDE - EQUALISE - SYSTEM, OVERLOAD-PROTECTION-SYSTEM, ROPS / FOPS, follower coupling, big driverhouse (colorglass), WORKING FLOOTLIGHT (in front), road lightings, comfortseat, windshield wiper (3x), back view mirror (2x), WARNING LIGHT, heating / ventilation, hold- and transporthooks. Tyres: ROUGH-TERRAIN-TYRES (15.5/80 - 24) - all around approx. 98 %. Transport dimensions: see above. ∗∗∗ EQUIPMENT IS FINANCEABLE in nearly all european countries / TRANSPORTATION WORLDWIDE POSSIBLE at good conditions / EXPORT: ONLY THE NET AMOUNT NEEDED TO PAID (!) ∗∗∗∗ © pb Fgedpfevfdlisx Ahyok

Condition: new, maximum load weight: 10,900 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: * RDÜ (Tire Pressure Monitoring System) * Electronic Braking System (EBS) * Emergency release device for spring-loaded cylinders * LED lighting Fjdpfx Ajxglh Rjhyegk * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with equalizing unit * Drawbar adjustable in height by approx. 300 mm * Drawbar extension by 250 mm to 2,250 mm * Jost landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox on the front right-hand side of the bulkhead * Side underrun protection * Plastic quarter mudguards * Hot-dip galvanized chassis and drawbar * Front wall * Rear wall * Tailgate and loading ramps * 50 mm softwood floor * Mounting bracket for subsequent installation of container locks positioned in front of the bulkhead * Bolted smooth plate bulkhead * Side walls made of trapezoidal steel sheet, foldable with drop side spring assist * Steel rear wall, can be slid in between the ramps - bracket for storage inside in front of the bulkhead when not in use * Bolted rear stakes * Perforated outer frame, angled at approx. 45 degrees with 2 t lashing capacity every 480 mm, option to install 3 t folding lashing rings every 600 mm, each front and rear corner with one 6.3 t lashing ring, various holes in the front and end crossmember for 1.2 t lashing points * One-piece mechanical grating loading ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear access angle approx. 860 mm * --Reinforced and certified superstructure according to EN 12642 XL incl. load securing certificate-- * Drop side color in RAL 2011 deep orange * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from CW 46 / 2025 * Sample images

Condition: new, maximum load weight: 10,900 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: * RDÜ (Tire Pressure Monitoring System) * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders * LED lighting * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with equalizing unit * Height-adjustable drawbar, adjustable by approx. 300 mm * Drawbar extension by 250 mm to 2,250 mm * Jost landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox mounted on the front right exterior of the bulkhead * Side underrun protection * Plastic quarter fenders * Hot-dip galvanized chassis and drawbar * Front wall * Rear wall * Tailgate and loading ramps * 50 mm softwood floor * Provision for retrofitting container locks in front of the bulkhead * Bolted smooth sheet steel front wall Fgedpjrvvflefx Ahysk * Side walls made from trapezoidal-profiled steel, foldable with drop-side spring assist * Insertable steel rear wall between the ramps; holder for stowage in front of the bulkhead when not in use * Bolted rear stanchions * Perforated outer frame angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm; possible installation of 3 t drop lashing rings every 600 mm; in each corner, front and rear, 1 x 6.3 t lashing ring; various holes in the front and end cross members for 1.2 t lashing options * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear entry ramp approx. 860 mm * --Reinforced and certified body according to EN 12642 XL including load securing certificate-- * Drop side color in RAL 9010 pure white * Painting of side walls in any RAL color available at extra cost * New vehicle with manufacturer’s warranty * Errors and intermediate sale subject to change * Immediately available from Egestorf

Condition: like new (used), mileage: 113,000 km, Year of construction: 2021, FORD TRANSIT CUSTOM MAXI 2021 DIESEL HYBRID DISPLACEMENT 2.0 KM 113000 DISTRIBUTION AND SERVICE JUST CARRIED OUT AIR CONDITIONING STANDARD STEREO CRUISE CONTROL PARKING SENSORS SINGLE OWNER 1 YEAR WARRANTY Fgedpev H Dkhsfx Ahyok FINANCING POSSIBILITY

Condition: new, maximum load weight: 10,750 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: * RDÜ tire pressure monitoring * EBS brake system * Emergency release device for spring-loaded cylinders Fjdpfx Ajv Eq Evshyegk * Drum brakes * 2 x 7 tonnes Gigant axles * Parabolic springs with compensating unit * Drawbar height adjustable by 300 mm - Drawbar extension by 250 mm to 2,250 mm * 15-pin power connector * LED lighting * Front landing gear * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, front right outside on the bulkhead * Side impact protection * Plastic quarter fenders * 50 mm softwood floor * In front of the bulkhead and rear slope, provision for retrofitting container locks for transporting 20" containers * Bolted bulkhead made of smooth sheet metal * Trapezoidal sheet steel side walls, foldable, split in the middle once * Steel rear wall can be inserted between the ramp brackets when not in use * Bolted rear stanchions * Perforated outer frame Approx. 45-degree canted with a 2-ton lashing capacity every 480 mm, installation of 3-ton drop lashing rings possible every 600 mm, 1 x 6.3-ton lashing ring in each of the front and rear corners, various holes in the front and end beams for 1.2-ton lashing capacity * One-piece mechanical grating loading ramps with spring mechanism for one-person operation, approx. 2,750 x 600 mm (collapsible up to 20 mm) * Rear approach slope approx. 860 mm chassis * Drawbar, front wall, tailgate, folding supports, and loading ramps hot-dip galvanized * Axles, springs, air chamber, flanged drawbar eye, and landing gear painted in a single black tone -- * Reinforced and certified body according to EN 12642 XL including load securing certificate-- * Wheelbase 1,140 * Side walls painted in black RAL 9010 pure white * Side panels can be painted in a RAL color for an additional charge * New vehicle with manufacturer's warranty * Errors and prior sale subject to change * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 10,750 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: * RDÜ Tire Pressure Monitoring System * EBS Braking System * Emergency Release for Spring Brake Cylinders * Drum Brakes * 2 x 7 t Gigant Axles * Parabolic Springs with Equalizing Unit * Drawbar height-adjustable by approx. 300 mm – drawbar extension by 250 mm to a total of 2,250 mm * 15-pin electrical connector Fgodpfx Ajv D Tcbshyjk * LED Lighting * Support crank at front * Folding external stabilizer legs at rear * Plastic tool box approx. 858 x 500 x 500 mm mounted front right outside on the front wall * Side underrun protection * Plastic quarter mudguards * 50 mm softwood floor * Fixture in front of front wall and rear slope for subsequent installation of container locks for transporting 20" containers * Bolt-on smooth sheet front wall * Side walls made of trapezoidal profile steel sheet, drop-down, divided once in the middle * Steel rear wall, slidable between the ramp brackets, can be stored inside in front of the front wall when not in use * Rear stanchions bolted * Perforated outer frame, approx. 45 degrees angled, with 2 t lashing capacity every 480 mm, provision for installation of 3 t folding lashing rings every 600 mm, 1 x 6.3 t lashing ring each in the front and rear corners, various holes in the front and rear cross members for 1.2 t lashing options * One-piece mechanical grating approach ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm) * Approach slope at rear approx. 860 mm on chassis * Drawbar, front wall, tailgate, folding supports, and approach ramps hot-dip galvanized * --- Axles, springs, air tanks, flange coupling, and support crank painted in black --- * Reinforced and certified structure according to EN 12642 XL incl. load securing certificate -- * Wheelbase 1,140 mm * Bodywork painted in RAL 9010 pure white * Body sides can be painted in a RAL color at extra charge * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from CW 47/2025