Low loader trailer

MÜLLER-MITTELTAL 14,4 to. Tandem Tieflader mit Auffahrrampen

Condition: new, maximum load weight: 10,760 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Draw Eye: * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm (total length 2,250 mm) * 40 mm flange draw eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Attachments: * Jost landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right outside on the bulkhead * Side underrun protection * Quarter plastic mudguards ----Low Loader Deck: * 50 mm softwood floor * Preparation at the front bulkhead for retrofitting container locks * Bolted smooth steel bulkhead * Fold-down side panels made from trapezoidal-profiled steel sheet with drop-side lifting assist * Retractable steel tailgate between the ramps (storage bracket inside in the front when not in use) * Bolted rear posts ----Load Securing: * Perforated outer frame, approx. 45 degrees angled, with 2 t lashing capacity every 480 mm Iedpfjxglibsx Adwohw * Option for 3 t drop lashing rings every 600 mm * One 6.3 t lashing ring in each front and rear corner * Various bores in the front and rear cross-members for 1.2 t lashing points ----Ramps: * One-piece mechanical mesh access ramps with spring assist for single-person operation approx. 2,750 x 600 mm (can be retracted to 20 mm) * Rear approach slope approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, front bulkhead, access ramps, and rear wall * Drop-side color in RAL 2011 deep orange * Side panels can be painted in any RAL color for an extra charge ----Info: * Reinforced and certified body as per EN 12642 XL, including load securing certificate * New vehicle with manufacturer's warranty * Subject to prior sale and errors excepted ----Delivery Time: * Available from calendar week 08/2026

Condition: new, maximum load weight: 10,760 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (300 mm adjustment range) * Drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange towing eye ----Lighting / Electrics: * TPMS (Tyre Pressure Monitoring System) * LED lighting ----General Accessories: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox mounted front right, outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood flooring * Preparation in front of the bulkhead for retrofitting container locks * Bolted smooth sheet steel bulkhead * Foldable side walls made of trapezoidal steel plate with drop-side lift assist * Steel rear wall, insertable between the ramps - storage bracket located inside, in front of the bulkhead when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Optional installation of 3 t drop lashing points every 600 mm * 1 x 6.3 t lashing rings in each front and rear corner * Various holes in front and rear end crossmembers for 1.2 t lashing options ----Ramps: * Single-piece mechanical grid ramps with spring mechanism for one-person operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear drive-on angle approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, access ramps, and rear wall * Side wall color in RAL 9010 pure white * Painting of side walls in other RAL colors available at extra cost Isdpsq Dyvvjfx Adwehw ----Information: * --Reinforced and certified body according to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Available from CW 08/2026

Condition: new, maximum load weight: 10,760 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic brake system (EBS) * Emergency release device for spring-loaded cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange towing eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Attachments: * Jost landing gear front * Externally mounted, hot-dip galvanized folding supports rear * Plastic toolbox, front right, mounted externally on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Preparation in front of the bulkhead for subsequent installation of container locks * Screw-fastened bulkhead of smooth sheet metal * Side walls made of trapezoidal steel sheet, drop-down with drop side spring lifter * Steel tailgate, retractable between ramps – rack for idle position mounted inside on the bulkhead * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings possible every 600 mm * Each front and rear corner equipped with 1 x 6.3 t lashing ring * Various holes in the front and rear crossmembers for 1.2 t lashing options ----Ramps: * One-piece mechanical grid ramps with spring unit, suitable for single-person operation, approx. 2,750 x 600 mm (can be telescoped down to 20 mm) * Approach bevel at the rear approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, access ramps and rear wall * Drop side colour in RAL 2011 deep orange * Painting of side walls in any RAL colour available at extra cost ----Info: * -- Reinforced and certified superstructure according to EN 12642 XL incl. load securing certificate -- * New vehicle with manufacturer's warranty Ihjdpfxoxglh Rj Adwsw * Subject to errors and prior sale ----Delivery time: * Available from week 08/2026

Condition: new, maximum load weight: 10,750 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: ----Brake System: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Drawbar / Flange Eye: * Drawbar adjustable in height by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange towing eye ----Electrical / Lighting: * RDÜ tire pressure monitoring * 15-pin electrical connector * LED lighting ----General Attachments: * Landing gear front * External folding supports, rear * Plastic toolbox approx. 858 x 500 x 500 mm, front right on the front wall * Side underrun protection * Plastic quarter mudguards ----Low-loader Platform: * 50 mm softwood flooring * Preparation in front of the bulkhead and rear slope for subsequent installation of container locks for transporting 20" containers Iedpov Eq Evefx Adwshw * Bolted front wall made of smooth sheet metal * Fold-down side walls made of trapezoidal steel sheet, split once in the middle * Removable steel rear wall, can be stowed inside at the front wall when not in use (between ramp holders) * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45 degrees angled, with 2 t lashing force every 480 mm * Option to install 3 t drop lashing brackets every 600 mm * 1 x 6.3 t lashing ring at each front and rear corner * Various holes in the front and rear crossbeam for 1.2 t lashing options ----Ramps: * One-piece mechanical grid ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Approach ramp at rear approx. 860 mm chassis ----Wheelbase: * Wheelbase 1,140 ----Paintwork: * Drawbar, front wall, tailgate, folding supports and ramps hot-dip galvanized * Axles, springs, air tanks, flange towing eye and landing gear painted black * Side boards painted RAL 9010 pure white * Side walls available in custom RAL color at extra charge ----Information: * Reinforced and certified body according to EN 12642 XL, including load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately from Egestorf on the A7

Condition: new, maximum load weight: 10,750 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: ----Brake system: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange towing eye: * Drawbar height adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange towing eye Isdpfxjv D Tcbe Adwohw ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin electrical connector * LED lighting ----General attachments: * Support winch at the front * External folding support legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted outside front right on the front wall * Side underride protection * Plastic quarter mudguards ----Low-loader deck: * 50 mm softwood flooring * Pre-fitted fixtures on the front wall and at the rear incline for subsequent installation of container locks for transporting 20" containers * Bolted front wall made from smooth sheet metal * Side walls made of folded steel sheet – trapezoidal profile – foldable, split once in the centre * Rear wall made of steel, can be slid in between the ramp holders, stowed inside in front of the front wall when not in use * Rear stanchions bolted ----Load securing: * Perforated outer frame bent to approx. 45 degrees with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible * 1 x 6.3 t lashing ring in each front and rear corner * Several holes in the front and rear cross members for 1.2 t lashing points ----Ramps: * One-piece mechanical mesh-access ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear approach angle approx. 860 mm chassis ----Wheelbase: * Wheelbase 1,140 mm ----Paint finish: * Drawbar, front wall, tailgate, folding supports and access ramps hot-dip galvanized * Axles, springs, air tanks, flange towing eye, and support winch painted in black * Side boards painted RAL 9010 pure white * Side walls can be painted in a RAL colour of your choice at extra cost ----Information: * Reinforced and certified body according to EN 12642 XL incl. load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately from Egestorf at the A7