Trailer with working platform

MÜLLER-MITTELTAL 19 to luftgef. Tandemtiefl. mit Einschubrampen

Condition: new, maximum load weight: 14,400 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, ETÜ-TA-ER 19.0: ---- Braking System: * WabcoEBS-E (electronic braking system) * Emergency release unit for spring brake cylinders * Drum brakes ---- Axles: * 2 x 11 t Gigant axles ---- Suspension: * Air suspension with lift and lowering device Cgjdpsmi Tcqjfx Abiou ---- Drawbar / Flange Eye: * Drawbar with 50 mm flange towing eye and height adjustment of 110 mm via offset plate ---- Electrics / Lighting: * RDÜ tire monitoring system * 15-pin power connector * LED tail lights 12 / 24 volts ---- General fittings: * Jost support winch at the front * External foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards ---- Lowbed area: * Reinforcement package for drilling rig transport on the chassis * 50 mm softwood floor, clamped version * Preparation in front of bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Split side walls from trapezoidal profiled steel sheet, foldable, with central folding stanchion * Steel rear wall, retractable between ramps - holder for storage inside at front bulkhead when not in use * Bolted rear stanchions ---- Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * Load securing package: in each front and rear corner 1 x 10 t UVV-certified lashing ring, each side 2 x 8 t UVV-certified retractable lashing rings in the outer frame, various holes in front and rear crossmember for 1.2 t lashing options ---- Ramps: * One-piece slide-in ramps 12 t / pair, approx. 2,750 x 620 mm * Rear approach angle approx. 860 mm ---- Loading height: * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm ---- Tires / Wheelbase: * Wheelbase: 1,810 mm * Tires: 235/75R17.5 ---- Paintwork: * Chassis, drawbar, bulkhead, tailgate, foldable supports, and ramps hot-dip galvanized * Axles, air tanks, flange eye, and support winch painted in black * Vehicle is hot-dip galvanized ---- Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ---- Delivery time: * Immediately available ex Egestorf

Condition: new, overall weight: 18,000 kg, axle configuration: 2 axles, Year of construction: 2026, Equipment: ABS, WEB-Trailer WFZ/W-18 235/75 17.5 turntable swap trailer 400 lift, for swap bodies C7.15 to C7.45 Chassis flush with the rear for swap bodies, total length 7150 mm Csdpfjg Dkw Sox Abisgu Attention: max. body length 7450 permitted) Chassis designed for swap bodies from 7150 to max. 7450 mm (symmetrical bodies) 2 booms and with 4 retractable pivot pin locks, 20" Arrangement for receiving swap bodies Spring center approx. 1100 mm Parking height approx. 970 to 1220 mm Underride height approx. 930 mm on level ground Axle loads: 18,000 kg (2 x 9000 kg) Driving position approx. 970mm (unloaded) Coupling height (middle) approx. 730 mm unloaded Front stop, foldable and adjustable for 7150 + 7450 mm symmetrical swap bodies Side impact protection set approx. 30 mm inwards Side impact protection on both sides Underrun protection in special width approx. 2300 mm Approval/COC Free choice of manufacturer axle Axle 9 ton 17.5" drum brake Air suspension unit 9 ton load capacity each with bellows diameter approx. 300 mm Total stroke approx. 400 mm (without height limit) Control unit lifting + lowering on the left in the direction of travel Two-line compressed air brake system EG 71-320 EBS brake system Make of choice of manufacturer Brand tires 235/75 R 17.5 Tire pressure control flashing SML 15-pin lighting system 24 volt LED Plastic fender, 180 degrees, over each axle Anti-spray mud flaps Fender bracket in galvanized version Chassis painted in RAL KTL coating with zinc phosphating plus powder, highest corrosion protection or hot-dip galvanized Price ex works Please note!!! Pictures show special equipment Let us advise you and work out a free and non-binding offer. Leasing, financing or hire purchase possible! We can respond to your wishes! Ask us - we will be happy to make you an offer. Errors and prior sale reserved!!!

Condition: new, maximum load weight: 13,490 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, TRA-Kombi 18.0: * 3 in 1 = for roll-off containers, skip containers, and as a low-loader ----Braking system: * EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10.5 ton axles ----Suspension: * Air suspension with manual rear lowering ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * TPMS (Tyre Pressure Monitoring System), displayable in the truck via EBS signal (no installation required on the truck side) * LED tail lights 12 / 24 V * 15-pin power connector ----General attachments: * Tool box made of powder-coated sheet steel * Spare wheel holder in basket design, right side * Closed side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact protection buffers Csdpfx Aswb Rakjbijgu * Foldable A-sign at rear ----Loading platform: * Hot-dip galvanized main frame with raised outer frame for guiding roll containers * Steel plate floor with roller recesses in the bogie area * Suitable for roll-off containers with length from 5,500 to 7,000 mm * Pneumatic 4-point clamp locking system and mechanically insertable stop angles at the front in the track * For transport of up to 2 skip containers with max. 10 m³ volume * Includes 8 plug-in skip stops for lateral centering of the skips, front 4 skip stops plug-in with swiveling stop * Weld bead as anti-slip coating in the ramp track area * Mechanical drop-down support legs at the rear ----Load securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and non-positive securing of skips; 4 clover-leaf lashing bars on each side * 1 pair of 13.4 t UVV lashing rings to the front * 4 x 8 t lashing eyes on each side, recessed into the outer frame ----Ramps: * Aluminum approach ramps (10.6 t / pair), 2,800 x 470 mm; suitable for rubber-tired and tracked vehicles (lockable storage compartment at rear) ----Paintwork: * Reflective contour tape on sides and rear * Frame hot-dip galvanized * Axles, drawbar painted black ----Information: * Load securing certificate according to DIN 30722-1 * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * --Permissible gross weight of 20,000 kg technically possible-- * New vehicle without initial registration with manufacturer warranty * Errors and prior sale excepted ----Delivery time: * Available immediately ex Egstorf

Condition: new, maximum load weight: 13,490 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, TRA-Kombi 18.0: * 3 in 1 = for roll-off containers, skip containers, and as a low-loader ----Braking system: * EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10.5 ton axles ----Suspension: * Air suspension with manual rear lowering ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * TPMS (Tyre Pressure Monitoring System), displayable in the truck via EBS signal (no installation required on the truck side) * LED tail lights 12 / 24 V * 15-pin power connector ----General attachments: * Tool box made of powder-coated sheet steel * Spare wheel holder in basket design, right side * Closed side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact protection buffers * Foldable A-sign at rear ----Loading platform: * Hot-dip galvanized main frame with raised outer frame for guiding roll containers * Steel plate floor with roller recesses in the bogie area * Suitable for roll-off containers with length from 5,500 to 7,000 mm * Pneumatic 4-point clamp locking system and mechanically insertable stop angles at the front in the track * For transport of up to 2 skip containers with max. 10 m³ volume * Includes 8 plug-in skip stops for lateral centering of the skips, front 4 skip stops plug-in with swiveling stop * Weld bead as anti-slip coating in the ramp track area * Mechanical drop-down support legs at the rear ----Load securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and non-positive securing of skips; 4 clover-leaf lashing bars on each side * 1 pair of 13.4 t UVV lashing rings to the front * 4 x 8 t lashing eyes on each side, recessed into the outer frame ----Ramps: * Aluminum approach ramps (10.6 t / pair), 2,800 x 470 mm; suitable for rubber-tired and tracked vehicles (lockable storage compartment at rear) ----Paintwork: * Reflective contour tape on sides and rear * Frame hot-dip galvanized * Axles, drawbar painted black ----Information: * Load securing certificate according to DIN 30722-1 * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * --Permissible gross weight of 20,000 kg technically possible-- * New vehicle without initial registration with manufacturer warranty * Errors and prior sale excepted Cgsdpfxjl Tnwzs Abieu ----Delivery time: * Available immediately ex Egstorf

Condition: new, maximum load weight: 10,360 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-ER 14.4: ----Brakes: * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * GIGANT axles ----Suspension: * Air suspension with lift and lowering system ----Drawbar / Flange drawbar eye: * Height-adjustable drawbar (adjustable by 300 mm) * 40 mm flange drawbar eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System with display option in the truck via EBS signal—no truck-side installation required) * LED lighting system * 15-pin power connector ----General attachments: Cgjdpfx Abjpk D Dqjieu * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Plastic toolbox mounted on the front wall, right-hand side * Side underrun protection * Plastic quarter mudguards ----Lowbed platform: * 50 mm softwood floor * Preparation for subsequent installation of 20" container locks at the front and rear * Bolted front wall, smooth sheet steel * Drop sides made of trapezoidal-profile sheet steel, foldable with sideboard spring assist * Bolted, hot-dip galvanized rear stakes ----Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to fit 3 t folding lashing rings every 600 mm * One 6.3 t lashing point at each front and rear corner * Various holes in the front wall and end crossmember for 1.2 t lashing options ----Ramps: * 1 pair of aluminum loading ramps approx. 3,310 x 400 mm (load capacity 8 t per pair), suitable for rubber-tired and tracked vehicles; storage compartment underneath the loading platform integrated in the chassis for rear access ----Paintwork: * Chassis, drawbar, front wall, and rear wall hot-dip galvanized * Entire vehicle hot-dip galvanized ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available ex Egestorf