Low loader trailerMÜLLER-MITTELTAL
11,9 to. Tand.-Kippanh., 5,5 mtr., Masterline
Low loader trailer
MÜLLER-MITTELTAL
11,9 to. Tand.-Kippanh., 5,5 mtr., Masterline
Fixed price plus VAT
€28,500
(€33,915 gross)
Year of construction
2024
Condition
New
Location
Egestorf 

Show images
Show map
Basic data
Price & Location
Fixed price plus VAT
€28,500
(€33,915 gross)
- Seller location:
- Eichenstich 12, 21272 Egestorf, Germany

Call
Technical details
- Maximum load weight:
- 8,620 kg
- Overall weight:
- 11,900 kg
- Axle configuration:
- 2 axles
- Loading space length:
- 5,500 mm
- Loading space width:
- 2,420 mm
- Loading space height:
- 500 mm
Details about the offer
- Listing ID:
- A112-18-097
- Reference number:
- 58921
- Update:
- 10.07.2025
Description
* KA-TA-R 11.9:
* 5.5-meter-long bridge completely finished in RAL 9010 white
* Tire pressure monitoring (RDÜ)
* Electronic braking system (EBS)
* Emergency release device for spring-loaded cylinders
Bedpfx Asm Angvegbslp
* Drum brakes
* 2 x 5.5-ton Gigant axles
* Parabolic springs with tandem compensating unit
* 300 mm height-adjustable, hot-dip galvanized drawbar with 40 mm flange drawbar eye
* Jost mechanical landing gear at the front
* 2 mechanical landing gears at the rear Hot-dip galvanized folding supports
* Toolbox made of galvanized sheet steel on the right side
* 15-pin power connector
* LED taillights
* Hot-dip galvanized bolted underride protection
* Toolbox made of galvanized sheet steel on the right side
* Plastic quarter fenders
* Net hooks on the sides and rear in the central locking bearings, as well as 3 on the front wall
* Hot-dip galvanized chassis
* Steel pallet, 3-way tipping body
* Continuous side walls without center stanchions, foldable with side wall spring lift
* Tailgate foldable and swinging via manual central locking
* Hot-dip galvanized bolted rear stanchions
* 1 x 5 ton lashing ring in each corner and 4 x 3 ton lashing rings on each side Lashing eyes embedded in the outer frame
* 4 mm sheet steel floor
* Rear mounting rail for the docking ramps
* Preparation for later retrofitting of side wall extensions
* Reinforced body with load securing certificate according to EN 12642 XL
* 1 pair of aluminum docking ramps approx. 3,310 x 400 mm (load capacity 8 tons per pair) suitable for rubber-tired and tracked vehicles
* Rear-locking storage compartment embedded in the chassis below the loading area
* Axles, springs, air tank, drawbar, and landing gear painted in a black tone
* Body color: RAL 9010 pure white
* Side walls and tipping body painted in a RAL color available for an additional charge
* Tires: 235/75R17.5
* Wheelbase: 990 mm
* New vehicle, not registered, with manufacturer's warranty
* Errors and prior sale subject to change
* Available immediately Egestorf on the A7
The listing was translated automatically. Translation errors are possible.
* 5.5-meter-long bridge completely finished in RAL 9010 white
* Tire pressure monitoring (RDÜ)
* Electronic braking system (EBS)
* Emergency release device for spring-loaded cylinders
Bedpfx Asm Angvegbslp
* Drum brakes
* 2 x 5.5-ton Gigant axles
* Parabolic springs with tandem compensating unit
* 300 mm height-adjustable, hot-dip galvanized drawbar with 40 mm flange drawbar eye
* Jost mechanical landing gear at the front
* 2 mechanical landing gears at the rear Hot-dip galvanized folding supports
* Toolbox made of galvanized sheet steel on the right side
* 15-pin power connector
* LED taillights
* Hot-dip galvanized bolted underride protection
* Toolbox made of galvanized sheet steel on the right side
* Plastic quarter fenders
* Net hooks on the sides and rear in the central locking bearings, as well as 3 on the front wall
* Hot-dip galvanized chassis
* Steel pallet, 3-way tipping body
* Continuous side walls without center stanchions, foldable with side wall spring lift
* Tailgate foldable and swinging via manual central locking
* Hot-dip galvanized bolted rear stanchions
* 1 x 5 ton lashing ring in each corner and 4 x 3 ton lashing rings on each side Lashing eyes embedded in the outer frame
* 4 mm sheet steel floor
* Rear mounting rail for the docking ramps
* Preparation for later retrofitting of side wall extensions
* Reinforced body with load securing certificate according to EN 12642 XL
* 1 pair of aluminum docking ramps approx. 3,310 x 400 mm (load capacity 8 tons per pair) suitable for rubber-tired and tracked vehicles
* Rear-locking storage compartment embedded in the chassis below the loading area
* Axles, springs, air tank, drawbar, and landing gear painted in a black tone
* Body color: RAL 9010 pure white
* Side walls and tipping body painted in a RAL color available for an additional charge
* Tires: 235/75R17.5
* Wheelbase: 990 mm
* New vehicle, not registered, with manufacturer's warranty
* Errors and prior sale subject to change
* Available immediately Egestorf on the A7
The listing was translated automatically. Translation errors are possible.
Seller
Note: Register for free or log in, to access all information.
Registered since: 2001
Send inquiry
Telephone & Fax
+49 40 33... show
These listings may also fit your interest.
Your listing has been deleted successfully
An error has occurred




















































