Used Müller-Mitteltal T Trailers for sale (242)

Condition: new, maximum load weight: 23,500 kg, overall weight: 30,000 kg, axle configuration: 3 axles, Year of construction: 2026, Equipment: ABS, * T 3: * ABS braking system * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle equalisation at rear * Side underrun protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning sign packages at front & rear * VA closed plastic fenders at front and straight galvanized sheet steel skirts at rear, each with splash guards * Reflective contour tape on sides and rear * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * Toolbox made of galvanized sheet steel approx. 650 x 300 x 600 mm – black powder-coated – mounted on the side under the chassis * 15-pin power socket * LED lighting 12 / 24 V * LED beacon (removable) at rear * Drawbar with 40 mm towing eye and height adjustment via draw spring & turnbuckle * Four stake pockets per side (stakes not included) with simultaneous lashing points * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform * 5 pairs of UVV-compliant lashing rings, pivoting and retractable * Loadable in all directions and recessed in the outer frame corners with 13.4 t, otherwise 10 t * 6 pairs of mechanical fold-out supports for 3 m total width (not on the rear slope) * Extension boards for widening stored in a compartment beneath the loading area * Excavator arm rest above rear axle up to end crossmember, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on sides of excavator arm rest) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable tip and load holding valves, hydraulically adjustable ramp offset * Hydraulic flow divider in the trailer (for truck hydraulic pump outputs over 40 l/min up to max. 140 l/min), twin-line hydraulics * Loading area above turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loaded loading height approx. 860 mm +/- 30 mm leveling unit * Chassis, turntable, fold-out supports, rear drop supports and drive-up ramps hot-dip galvanized * Axles, springs, drawbar, air tanks etc. painted black * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available from calendar week 03/2026 Fpsdpfjtplwfjx Afmjp

Condition: used, empty load weight: 2,500 kg, maximum load weight: 7,500 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 09/2003, loading space length: 5,200 mm, suspension: steel, tire size: 245/70R19,5 140/138J, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245/70R19,5 140/138J, rear tire size: 245/70R19,5 140/138J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, 10 x lashing eyes, 600 mm drop sides, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Fjdpfx Afjxr Duajmepp

Condition: used, empty load weight: 6,250 kg, maximum load weight: 23,750 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 11/2008, loading space length: 8,300 mm, loading space width: 2,510 mm, loading space height: 930 mm, suspension: steel, tire size: 235/75R17.5, color: red, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3-axles, turntable, leaf suspension, ABS (anti-lock braking system), can be widened to 3m, lashing eyes, mechanical ramps, rear support, side aluminum underrun protection, twin tires, storage box Body: 3-axle low-loader trailer with mechanical drive-on ramps 3x 10t Gigant axles, drum brakes, Can be widened to 3m! Fpsdpfxexvzq He Afmjp Ramp length approx. 2900mm! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to change, prior sale and mistakes excepted! - .

Condition: used, empty load weight: 7,800 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 07/2006, next inspection (TÜV): 05/2026, loading space length: 9,100 mm, loading space width: 2,750 mm, suspension: air, tire size: 235/75 R17,5, color: grey, Equipment: ABS, Drum brake Payload 22,200 kg Fodpjwh Rwvofx Afmepp Rubber floor Hydraulic double ramps and hydraulic lateral shift Gigant axles Subject to errors and omissions.

Condition: used, axle configuration: 2 axles, Year of construction: 2022, Tipper low-loader combination. Permissible total weight: 18,000 kg; payload: 13,470 kg. 3-way tipper body, approx. 5,050 x 2,420 x 1,100 mm (internal dimensions), 12 lashing rings, 600 mm steel drop sides, swinging and foldable with central locking, side panels with spring-assisted lift, swinging side extension drop sides, 500 mm, rear drop side swiveling as well as swinging and foldable. 50 mm towing eye, height-adjustable drawbar. 1 pair of aluminum drive-on ramps in lockable compartments under the tipper. Loading height (unladen) approx. 1,200 mm. Two-speed landing gear at the front, foldable supports at the rear. 2-line air brake system, 1-line hydraulic system, 24 volts. SAF axles, parabolic suspension with equalizing mechanism, ABS. Tyres: 385-55R22.5. Chassis hot-dip galvanized, bodywork RAL 7016 - anthracite grey. The vehicle has had little use and is in good condition. = Further information = Fpodpfxsxu Uxhs Afmop Unladen weight: 4,530 kg Payload: 13,470 kg Gross vehicle weight: 18,000 kg Front tyres: 385-55R22.5 Rear tyres: 385-55R22.5 Country of manufacture: DE Please contact Jan-Marc Schwickert for further information.

Condition: used, maximum load weight: 25,400 kg, overall weight: 35,000 kg, axle configuration: 2 axles, first registration: 09/2003, Equipment: ABS, Ref. No.: B - 12 On behalf of customer * Müller Mitteltal * TTS-VLL * 2-axle semi-trailer * Low-loader Fjdpsxvf Tfsfx Afmspp * Wheel wells * Hydraulic ramps Trade-in possible Financing from 3.99% Errors and prior sale excepted! The information in this ad is non-binding and does not constitute guaranteed characteristics. The seller assumes no liability for typographical or data transmission errors. Listed features must be verified separately. All information provided in the listings is non-binding! Delivery throughout Germany available on request. Opening hours: Monday to Thursday from 9:00 am - 5:00 pm Friday from 9:00 am - 2:00 pm and by appointment!

Condition: new, maximum load weight: 23,500 kg, overall weight: 30,000 kg, axle configuration: 3 axles, Year of construction: 2026, Equipment: ABS, * T 3: * ABS brake system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation at the rear Fpjdpfxoq Dyv Is Afmop * Side underrun protection * Swivel support legs at the rear of the chassis frame * Mechanically adjustable warning sign holders front & rear * Front axle with closed plastic mudguards, rear axle with straight galvanized steel skirts, each with spray protection * Reflective contour marking tape on the sides and rear * Folding (hot-dip galvanized) toolbox lid in the turntable platform * Toolbox made of galvanized steel sheet approx. 650 x 300 x 600 mm - powder-coated black - fitted laterally under the chassis * 15-pin power connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring & turnbuckle * Four stake pockets on each side (no stakes present) with lashing capability * Load securing package consisting of: 2 lashing eyes (6.4 t) front left & right on the main frame of the turntable platform * 5 pairs of UVV-compliant swing-out and retractable lashing rings * Loadable in all directions and integrated into the outer frame at the corners (13.4 t), elsewhere 10 t * 6 pairs of mechanical fold-out outriggers for total width of 3 m (not in the rear slope) * Widening planks stored in a compartment under the loading surface * Excavator arm support over the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings laterally in the excavator arm support) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically folding ramp tips and load holding valves, hydraulically lateral ramp displacement * Hydraulic flow divider in the trailer (for truck hydraulic pump output over 40 l/min up to max. 140 l/min), dual-line hydraulic system * Loading area above the slewing ring: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach slope) * Loaded platform height approx. 860 mm +/- 30 mm (compensation unit) * Chassis, turntable, folding outriggers, rear drop supports and ramps hot-dip galvanized * Axles, springs, drawbar, air tanks etc. painted in black * New vehicle with manufacturer warranty * Errors and prior sale excepted * Available from CW 03/2026

Condition: used, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 01/2016, Year of construction: 2016, Müller Mitteltal T4 Profi, year of manufacture: 2016, low-bed trailer, 4 axles / leaf suspension, loading bay capacity: 40,000 kg, ramps, internal reference number: 25A037 Fsdpfx Afsxul D Iomjpp

Condition: new, suspension: other, color: other, gearing type: other, driver cabin: other, emission class: none, Leveling bracket for low-loader semi-trailer including container closures, price per leveling bracket, , --  Subject to printing errors, mistakes and changes, sample images --, More information at: !, More details: ! Fjdpfx Afexpwh Ismopp

Condition: used, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 12/1999, loading space length: 5,100 mm, loading space width: 2,450 mm, loading space height: 2,500 mm, loading space volume: 32 m³, total width: 2,550 mm, total height: 3,700 mm, Year of construction: 1999, 2-Axle Müller-Mitteltal Flatbed Curtain-Sider Tandem Trailer TYPE: EAL-TA VIN: 043762 Chassis / Attachments: * Leaf suspension * Müller-Mitteltal axles with drum brakes * Tyres: 245/70 R19.5 * Condition: approx. 90% * 1 x spare wheel carrier with spare wheel * 1 x PVC tool box * Height-adjustable drawbar * 40 mm towing eye * Rear supports Body: * Flatbed with curtain-sider (“Hamburger roof”) * Cargo area dimensions (L/W/H): 5.10 m / 2.45 m / 2.50 m * 5 lashing rings per side * 600 mm drop sides * Folding central stanchion Weights: * Gross vehicle weight: 10,500 kg * Payload: 7,650 kg * Unladen weight: 2,850 kg Miscellaneous: * German vehicle * New roadworthiness inspection (TÜV) available on request New main inspections / safety tests or weight downgrades/upgrades are available on request. We are happy to assist you in obtaining export or temporary license plates, and we can also arrange transport of your purchased vehicles within Germany. Contact us! ---- We speak the following languages: German, English and Russian! ---- No liability for printing & typographical errors. Subject to change, prior sale and errors! ---- Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein, Germany. With our many years of experience in the reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge specializes in the sale of new and used commercial vehicles. On our 11,000 m² premises, we offer a wide range of vehicles. Our corporate philosophy is characterized by fairness and integrity. We value customer satisfaction highly and offer our customers a comprehensive all-round service package, assigning a knowledgeable contact person to assist you throughout the purchase or sale process. See for yourself! Our services for you: Vehicle loading We are happy to assist you with loading your purchased vehicles. Arranging special transports We are happy to assist with organizing special transport. Temporary/export license plates We are happy to assist in obtaining export or short-term registration plates. Fjdjxfdquopfx Afmjpp Customs clearance We are happy to assist with customs formalities.

Condition: used, axle configuration: 2 axles, first registration: 04/2005, Year of construction: 2005, Equipment: ABS, = Additional options and accessories = - EBS = More information = Empty weight: 4.080 kg Carrying capacity: 13.920 kg Fodpfsxt Tf Rox Afmopp GVW: 18.000 kg

Condition: used, maximum load weight: 8,100 kg, overall weight: 11,000 kg, axle configuration: 2 axles, first registration: 10/2008, loading space length: 6,000 mm, loading space width: 2,480 mm, loading space height: 900 mm, total width: 2,550 mm, Gross weight: 11,000 kg Unladen weight: 2,900 kg Payload: 8,100 kg Overall length: 8,100 mm Loading length: 6,000 mm Width: total width 2,550 mm / platform width 2,480 mm Loading height: approx. 900 mm Further information Fjdpfx Afjxtfkfjmepp - Side wall height: 400 mm - Wooden floor - Spring ramps L: 2,700 mm W: 600 mm - Height-adjustable drawbar - Tyres 235/75 R17.5

Condition: new, maximum load weight: 10,800 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: * EBS brake system * Emergency release device for spring brake cylinders Fpjdpfsxvgrpsx Afmjp * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with compensation unit * Height-adjustable drawbar, adjustable by approx. 300 mm * Drawbar extension by 250 mm to a total of 2,250 mm * Tire pressure monitoring with display capability in the truck via EBS signal—no truck-side installation required * Landing gear (manual crank jack) at the front * External folding supports at the rear * 15-pin electrical connector * LED lighting system, 12/24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrical systems * Plastic toolbox, approx. 858 x 500 x 500 mm, front right, mounted outside on the bulkhead * Side underrun protection * Plastic quarter fenders * 50 mm softwood flooring * Bracket in front of bulkhead for retrofitting container locks * Bolted 400 mm bulkhead made of smooth sheet metal * Rear stanchions bolted * Side panels with spring-assisted lifting mechanism * Perforated external frame, approx. 45 degrees bent, 2 t lashing capacity every 480 mm; possible installation of 3 t folding lashing rings every 600 mm; one 6.3 t lashing ring in each front and rear corner; front and rear cross members with various holes for 1.2 t lashing options * One-piece hydraulic mesh loading ramps, approx. 2,750 x 600 mm (retractable to 20 mm) * Hydraulic flow divider in trailer (for hydraulic pump output in truck over 40 l/min up to max. 140 l/min) * Chassis, drawbar, bulkhead, mechanical drop supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, front landing gear, and flange towing eye painted in black * Side panels painted in RAL 2011 deep orange * Custom RAL color painting of the side panels available at extra cost * New vehicle with manufacturer's warranty * Errors and prior sale reserved * Immediately available from Egestorf

Condition: used, axle configuration: 3 axles, first registration: 09/2001, total length: 10,000 mm, total width: 2,510 mm, suspension: steel, Year of construction: 2001, Additional information : Brand: MÜLLER MITTELTAL Model: T 3 Structure: platform ( platform L=8400 / W=2510 / H=940 mm ) Year: 09.2001 Suspension: steel Brakes: drum Dimensions: L/W: 10000 mm / 2510mm Masses: full/empty: 24000 kg / 6100 kg = More information = Suspension: leaf suspension Empty weight: 6.100 kg Carrying capacity: 17.900 kg GVW: 24.000 kg Fpodpeuwvbqofx Afmjp Please contact Andrei Somov, Mark Ševtšenko, Alejandro Goyeneche or Deniss Urmaker for more information

Condition: used, empty load weight: 8,500 kg, maximum load weight: 31,500 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 07/1996, suspension: other, tire size: 235/75R17,5 141/140J, color: other, gearing type: other, front tire size: 235/75R17,5 141/140J, rear tire size: 235/75R17,5 141/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, , -- Misprints, errors and omissions excepted, sample pictures --, More details under: !, More Details: ! Fjdpsxphhxefx Afmepp

Condition: used, axle configuration: 1 axle, first registration: 08/1993, Year of construction: 1993, Equipment: ABS, = Additional options and accessories = - EBS = More information = Fpsdpfx Afsxt Sl Nemsp Empty weight: 3.700 kg Carrying capacity: 9.300 kg GVW: 13.000 kg

Condition: new, maximum load weight: 10,800 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 7 ton Gigant axles * Parabolic springs with compensating unit * Drawbar height adjustable by approx. 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm * Tire pressure monitoring system with display option in the truck via EBS signal - no truck-side installation required * Front landing gear * Rear external foldable supports * 15-pin power connector * LED lighting system, 12 / 24 V * EBS multi-voltage system for towing vehicles with 12 and 24 V electrics * Plastic toolbox approx. 858 x 500 x 500 mm, mounted front right outside on the bulkhead * Side underrun protection * Plastic quarter mudguards * 50 mm softwood flooring * Pre-installed facility in front of the bulkhead for retrofitting container locks * Bolted 400 mm bulkhead made of flat steel sheet * Bolted rear stanchions * Drop sides with spring assist * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm, installation of 3 t recessed lashing rings every 600 mm possible, 1 x 6.3 t lashing ring in each of the front and rear corners, various holes in the front and end beams for 1.2 t lashing options * One-piece hydraulic grid ramps approx. 2,750 x 600 mm (can be compressed to 20 mm) * Hydraulic flow divider in the trailer (for truck hydraulic pump output above 40 l/min up to max. 140 l/min) * Chassis, drawbar, bulkhead, mechanical drop supports and ramps hot-dip galvanized * Axles, springs, air tanks, front landing gear, and towing eye flange painted in black * Side walls painted in RAL 2011 deep orange Fpsdpfexvgrisx Afmjp * Painting of the side panels in any RAL shade available at extra cost * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Immediately available from Egestorf

Condition: new, suspension: other, color: other, gearing type: other, driver cabin: other, emission class: none, fuel: biodiesel, Storage compartment for aluminum ramps, price per storage compartment, length approx. 2.48 m, width approx. 1 m, height approx. 27 cm, , --  Misprints, errors and changes reserved, sample images --, More information at: !, More details: ! Fpsdpexnx Rnjfx Afmjp

Condition: used, axle configuration: 2 axles, first registration: 02/1992, Year of construction: 1992, Equipment: ABS, Empty weight: 3.140 kg Carrying capacity: 14.860 kg Fpodpfx Asxt Sd Sjfmjp GVW: 18.000 kg Selling price: € 1.500, US$ 1.733

Condition: like new (used), maximum load weight: 14,400 kg, overall weight: 12,080 kg, axle configuration: 2 axles, loading space length: 3,900 mm, loading space width: 1,920 mm, loading space height: 415 mm, suspension: parabolic leaf (spring), tire size: 285/70R19.5, wheelbase: 1,140 mm, trailer brake: trailer braked, Year of construction: 2022, - ETM-TA 14.4: - Wabco ABS brake system - Emergency release device for spring-loaded cylinders - Drum brakes, 2 x 7 t Gigant axles - Parabolic springs with tandem equalizing module - Height-adjustable drawbar (+/- 150 mm) with 40 mm bolted towing eye - Jost landing gear at the front, side underrun protection - Foldable A-board at the rear - 15-pin electrical connector, multi-chamber tail lights - Fixed steel front and side walls - Removable steel rear wall - Floor made of 50 mm softwood - 1 sliding steel plate (750 x 1,000 mm) in the front area incl. 2 container stops at the front, each insertable in 2 positions - 4 relocatable container stops, insertable in 2 positions for lateral centering of containers - Each side with 1 x (13.5 t) UVV lashing point for attaching securing elements - 2 ratchet tensioners (spindle-adjustable) with compensating chain and quick shortener (tension force 6,300 kg) - Rear crossbeam for positioning aluminum loading ramps incl. 2 additional drop supports at the rear - Loading height (unladen) approx. 710 mm - Chassis, front wall, side walls, mudguards, drawbar, rear drop supports hot-dip galvanized - Axles, springs, landing gear, air tanks painted in black - Tyres: 285/70R19.5 - Wheelbase: 1,140 mm - Loading edge (unladen): approx. 710 mm Fpodsxvbcpjpfx Afmsp - Finish: hot-dip galvanized - Vehicle has a day registration in 06/2024, has not been used or loaded due to lack of tire pressure monitoring system - New vehicle with manufacturer's warranty - Subject to prior sale and errors - Immediately available from Egestorf on the A7

Condition: used, axle configuration: 2 axles, first registration: 08/1996, Year of construction: 1996, Equipment: ABS, = Additional options and accessories = - EBS Fodpfxjxt Sd Es Afmspp = More information = Empty weight: 2.360 kg Carrying capacity: 10.640 kg GVW: 13.000 kg

Condition: new, functionality: fully functional, empty load weight: 2,140 kg, maximum load weight: 12,260 kg, overall weight: 14,400 kg, axle configuration: 2 axles, tire size: 285/ 70 R 19,5, wheelbase: 1,140 mm, Year of construction: 2026, - TM-TA 14.4: - Wabco EBS (Electronic Braking System) - RDÜ tire pressure monitoring system - Emergency release device for spring brake cylinders - Drum brakes - 2 x 7 t Gigant axles - Parabolic springs with balancing unit - Jost landing gear at the front, 2 external drop-down supports at the rear - Height-adjustable, +/- 150 mm hot-dip galvanized drawbar - Hot-dip galvanized chassis, 15-pin power connector - LED tail lights - Closed individual plastic mudguards Fpedoxu Hplopfx Afmsp - Foldable A-panel at the rear - Plastic underrun protection buffer on the underrun guard - Hot-dip galvanized collision guard with integrated chain storage box (W = 370 mm x D = 420 mm x H = 480 mm) front left & right - 2 repositionable skip stops for lateral centering of containers - Front skip stops can be locked in 4 positions with a swinging stop - 2 x 5.3 t UVV lashing rings on each side for attaching tensioning devices - Axles, springs, air tanks, and landing gear painted in black - Subject to errors and prior sale - New vehicle with manufacturer's warranty - Available from week 05 / 2026

Condition: used, axle configuration: 2 axles, first registration: 09/1993, Year of construction: 1993, Equipment: ABS, = Additional options and accessories = - EBS = More information = Weights Empty weight: 4.600 kg Carrying capacity: 13.400 kg GVW: 18.000 kg Financial information Selling price: € 6.500, US$ 7.510 Other information Tyre tread remainder on axle 1: 50% Make of axle 1: BPW Tyre tread remainder on axle 2: 50% Make of axle 2: BPW Tyre tread remainder on axle rear: 50% Fpedext Rw Ropfx Afmjp Make of axle rear: BPW

Condition: new, functionality: fully functional, empty load weight: 2,140 kg, maximum load weight: 12,260 kg, overall weight: 14,400 kg, axle configuration: 2 axles, suspension: steel, tire size: 285/ 70 R 19,5, wheelbase: 1,140 mm, trailer brake: trailer braked, Year of construction: 2026, - TM-TA 14.4: - Includes 2 ratchet tensioners permanently mounted on the outer frame with chain box, both sides with eye and quick-shortener, in Y-special version, 6.3 t - Tension force with load securing certificate - Wabco EBS (Electronic Braking System) - RDÜ Tire Pressure Monitoring System - Emergency release device for spring-loaded cylinders - Drum brakes - 2 x 7 t Gigant axles - Parabolic springs with compensation unit - Jost support winch at the front - 2 x external drop-down rear supports - Height-adjustable galvanized tow bar, +/- 150 mm - Hot-dip galvanized chassis - 15-pin electrical connector - LED tail lights Fpjdexuhy Eepfx Afmep - Closed individual plastic mudguards - Folding A-shield at the rear - Plastic collision protection buffers on underrun protection - Hot-dip galvanized underrun protection with integrated chain storage box, dimensions: W=370 mm x D=420 mm x H=480 mm, front left & right - 2 removable trough stops for lateral trough centering - Front trough stops with 4-position adjustable pendulum mount - Each side with 2 x 5.3 t UVV lashing rings for attaching tensioning elements - Axles, springs, air reservoirs, and support winch painted in black - Subject to errors and prior sale - New vehicle with manufacturer's warranty - Available from week 05 / 2026

Condition: new, maximum load weight: 9,070 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,010 mm, loading space height: 325 mm, Year of construction: 2025, * ETS-TA-B 11.9: * Wabco EBS (electronic braking system) * TPMS (tire pressure monitoring system) * Drum brakes, 2 x 5.5 t Gigant axles * Parabolic springs with balancing unit * Drawbar adjustable in height by approx. 300 mm * BPW support winch * Mechanical drop-down supports at the rear * Plastic toolbox on the front right of the bulkhead * Side underrun protection * LED lighting * 50 mm softwood floor * In the corners in front of the bulkhead and the rear cross member, 1 x 6.3 t lashing point each; laterally, 2 x 6.3 t UVV-compliant lashing rings each set into the outer frame * One-piece mechanical grating ramps with spring mechanism for one-man operation, approx. 2,350 x 870 mm (20 mm spacing between, ramps non-slidable) * Front wall, side walls, mudguards and drawbar hot-dip galvanized * Axles, springs, air tank, and front support winch painted black * New vehicle with full manufacturer's warranty * Errors and interim sale reserved * Immediately available from Egestorf Fsdpfx Afowyhzvsmepp