Used Müller-Mitteltal Three-Way Tipper Trailers for sale (241)

Condition: new, maximum load weight: 24,020 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2025, * T3 Profi 30.0: * EBS braking system * TPMS tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical axle equalization at the rear * Side underrun protection Gjdjl Th Nnepfx Aaxobw * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning board kits at front and rear * VA closed plastic mudguards at the front, straight galvanized steel fenders at the rear, each with spray protection * Reflective contour marking tape on the sides and rear * Tool box made of galvanized steel sheet – black powder-coated – approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable rotating beacon at the rear * Tow bar with 50 mm towing eye and height adjustment via tension spring and turnbuckle * 15-pin power plug * Four stake pockets per side (stakes not included), with combined lashing possibility * Load securing package comprising: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform, 6 pairs of UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions and recessed in the outer frame – load capacity at corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding extensions for 3 m total width (not on the rear slope) * Widening planks stowed in the center of the loading platform * Single-piece hot-dip galvanized hydraulic ramps (approx. 3,000 x 720 mm), mechanically adjustable laterally * 4-section control block for retrofitting hydraulic lateral ramp displacement * Loading area above turntable: approx. 1,960 x 2,520 mm * Unloaded loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unloaded loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, tow bar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * Approx. 5,980 kg unladen weight * Technically permissible gross weight of 30,000 kg * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available from calendar week 44 / 2025

Condition: used, maximum load weight: 8,000 kg, overall weight: 11,000 kg, axle configuration: 2 axles, first registration: 10/2000, loading space length: 5,600 mm, loading space width: 2,480 mm, loading space height: 900 mm, total width: 2,550 mm, Total weight: 11,000 kg Unladen weight: 3,000 kg Gedswz Drgspfx Aaxsbw Payload: 8,000 kg Overall length: 7,450 mm Loading length: total 5,600 mm, of which rear incline 1,000 mm Width: total width 2,550 mm / platform width 2,480 mm Loading height: approx. 900 mm Further information - Side wall height: 400 mm, split and foldable - Split spring ramps, dimensions approx. L: 3,380 mm W: 600 mm - Ramps covered with phenolic plywood - Large lashing package - BPW axles - Tyres: 235/75 R17.5 - LED reversing lights - Plastic toolbox

Condition: used, axle configuration: 2 axles, Year of construction: 2008, Tandem low-loader trailer, drive-over design. Perm. total weight 11,000 kg (currently derated to 9,990 kg), unladen weight 2,850 kg. Body approx. 5,550 x 2,460 x 370 mm (internal) with access ramp, 14 lashing rings, drop-down sidewalls, loading height approx. 850 mm. Spring ramps approx. 2,700 x 600 mm. Height-adjustable towing drawbar, 40 mm towing eye. Height-adjustable two-speed landing gear at the front, foldable supports at the rear. Toolbox. Dual-line air brake system, 24 volts. BPW axles, parabolic suspension with compensator, twin tires 205-65R17.5. Painted white. Safety inspection due. Sale in current condition. Gedpjw A I Rpofx Aaxsbw = Further information = Unladen weight: 2,850 kg Payload: 8,150 kg GVW: 11,000 kg Front tires: 205-65R17.5 Rear tires: 205-65R17.5 Country of manufacture: DE Contact Jan-Marc Schwickert for further information.

Condition: used, maximum load weight: 18,610 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 06/2024, next inspection (TÜV): 06/2025, loading space length: 7,075 mm, total width: 2,550 mm, total height: 1,150 mm, Year of construction: 2023, Equipment: ABS, Immediately available stock vehicle with daily registration in 07/2024 Gbsdeugzqyspfx Aaxew ABS, EBS-E, RSS, 3x 9 ton axles (Gigant), steel rims, tires 235/75 R17.5, drum brake, automatic slack adjuster, air suspension, lifting + lowering function, 2nd axle as lifting axle, WABCO SmartBoard, weight detection / axle load display via EBS-Canbus signal for display on display in the driver's cab (truck must be prepared accordingly, no calibrated scale), release valve on the front axle, spring brake on the rear axle, two pairs of pneumatic container locks for roll-off containers, storage box made of galvanized sheet steel approx.: 1,000x300x600mm, storage box for container net approx.: 1,000x300x600mm, side protection device closed, underrun protection fixed, rear apron on the underrun protection, A-sign foldable, ramp compartment including aluminum ramps (2,800 mm, long 470 mm wide, approx. 10,600 kg load capacity/pair), hot-dip galvanized chassis, modular lights, some LED, 2 additional LED reversing lights at the rear of the vehicle. La-Si package: 8 pieces of UVV fall lashing brackets (LC 8,000 daN) mounted to the existing hole pattern in the outer frame (protruding by the material thickness) ? Arrangement: 1 pair in front of the rear carrier / 3 pairs in the flat loading area, 1 pair of foldable lashing eyes (LC 13,500 daN) on the front wall carrier, 3 pairs of foldable lashing eyes (LC 10,000 daN) recessed in the outer frame, 8 interchangeable trough stops for lateral centering of the tipping troughs, 4 front trough stops plugged in with a swinging stop. Duomatic coupling head / 15-pin power supply Draw fork 2,100 mm plus 500 mm lowering device / 40 mm DIN towing eye Truck coupling height: approx. 780-980 mm Container length: 5,500 mm - 7,000 mm i.Li. or 2x 10 cbm ASK troughs or construction machine transport Height: approx. 950 mm with unloaded vehicle (centering edge 970 mm) 27,000 kg GG technically possible multiple available!! Hüffermann Krandienst GmbH: we trade, we rent, we repair. Roll-off trailers, roll-off tippers, garbage collection vehicles, mobile cranes and work platforms... Talk to us! Do you need financing? We would be happy to provide you with a non-binding financing offer. The offer is subject to change, without warranty or guarantee. Subject to prior sale. A deposit of 10% of the purchase price is required for a reservation. No reservation or claim to availability exists until the money has been received. The purchase is only concluded when payment has been received. The vehicle remains the property of Hüffermann Krandienst GmbH until full payment has been made. Payments are only accepted in euros at no additional cost to the seller and only by bank transfer or cash. No checks.

Condition: used, empty load weight: 3,450 kg, maximum load weight: 14,550 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 05/2010, next inspection (TÜV): 07/2025, suspension: air, tire size: 235/75R17.5, color: yellow, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, turntable trailer, air suspension, ABS (anti-lock braking system), container lock, underride protection, side aluminum side guard, twin tires. Body: 2-axle outside-roller trailer for roll-off containers from 5.5 m to 7 m or 2 x 10 m³ skip containers; BPW axles, drum brakes, pneumatic locking, pneumatic drawbar lowering. ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted! Gbjdpfx Aowypl Noaxow

Condition: used, maximum load weight: 25,230 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 06/2012, Equipment: ABS, Müller Mitteltal 2-axle concrete semi-trailer type SF32 BM/BT Body type: HTM 1004 Liebherr 10 m³ from year of construction 2012, BPW axles, drum brakes, air suspension, lift axle, underride guard, EBS, ABS Gedpfordt H Eex Aaxsbw 1st hand inspection book Permissible total weight: 32000 KG Unladen weight: 6770 KG

Condition: new, maximum load weight: 24,020 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2025, * T3 Profi 30.0: * EBS braking system * TPMS tire pressure monitoring system * Emergency release device for spring brake cylinders Gjdpfx Aaol Th I Aoxjbw * Drum brakes * 3 x 11 t Gigant axles * Parabolic springs, mechanical axle equalization at the rear * Side underrun protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning board kits at front and rear * VA closed plastic mudguards at the front, straight galvanized steel fenders at the rear, each with spray protection * Reflective contour marking tape on the sides and rear * Tool box made of galvanized steel sheet – black powder-coated – approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for the toolbox on the turntable platform * Multi-voltage system * LED tail lights * Removable rotating beacon at the rear * Tow bar with 50 mm towing eye and height adjustment via tension spring and turnbuckle * 15-pin power plug * Four stake pockets per side (stakes not included), with combined lashing possibility * Load securing package comprising: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the turntable platform, 6 pairs of UVV-compliant lashing rings, swiveling and lowerable, loadable in all directions and recessed in the outer frame – load capacity at corners 13.4 t, otherwise 10 t * 6 pairs of mechanical folding extensions for 3 m total width (not on the rear slope) * Widening planks stowed in the center of the loading platform * Single-piece hot-dip galvanized hydraulic ramps (approx. 3,000 x 720 mm), mechanically adjustable laterally * 4-section control block for retrofitting hydraulic lateral ramp displacement * Loading area above turntable: approx. 1,960 x 2,520 mm * Unloaded loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unloaded loading height approx. 910 mm (incl. 860 mm approach slope) * Chassis, turntable, tow bar, and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in black * 235/75 R 17.5 twin tires * Approx. 5,980 kg unladen weight * Technically permissible gross weight of 30,000 kg * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available from calendar week 44 / 2025

Condition: used, maximum load weight: 30,350 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 09/2007, loading space length: 9,800 mm, loading space width: 2,520 mm, total width: 2,550 mm, Total weight: 24,000 kg / 40,000 kg Unladen weight: 9,650 kg Payload: 14,350 kg / 30,350 kg Total length: 11,750 mm Loading length: 9,800 mm, offset approx. 2,400 mm, low bed with rear attachment approx. 7,400 mm. Width: 2,550 mm Loading height: 860 mm Further information - Long, 2-part ramps with hydraulic operation - Excavator bucket rest - Twin tires 235/75 R17.5" - Wheel recesses - BPW axles - Large lashing package Gbjdpewlyx Refx Aaxjw - Warning signs - 3 m widening - LED reversing lights - Total bulkhead 2,000 mm All further information at

Condition: used, maximum load weight: 13,470 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2024, next inspection (TÜV): 06/2025, loading space length: 7,075 mm, total width: 2,550 mm, total height: 1,150 mm, Year of construction: 2023, Equipment: ABS, Immediately available stock vehicle with daily registration in 07/2024 ABS, EBS-E, RSS, 2x 10 ton axles (Gigant), steel rims, tires 235/75 R17.5, drum brake, automatic slack adjuster, air suspension, lifting + lowering function, WABCO SmartBoard, weight detection / axle load display via EBS-Canbus signal for display on display in the driver's cab (truck must be prepared accordingly, no calibrated scale), release valve on the front axle, spring brake on the rear axle, two pairs of pneumatic container locks for roll-off containers, storage box made of galvanized sheet steel approx.: 1,000x300x600mm, storage box for container net approx.: 1,000x300x600mm, side protection device closed, underrun protection fixed, rear apron on the underrun protection, A-shield foldable, Ramp compartment including aluminum ramps (2,800 mm, long 470 mm wide, approx. 10,600 kg load capacity/pair), hot-dip galvanized chassis, modular lights, some LED, 2 additional LED reversing lights at the rear of the vehicle. La-Si package: 8 pieces of UVV fall lashing brackets (LC 8,000 daN) mounted to the existing hole pattern in the outer frame (protruding by the material thickness) ? Arrangement: 1 pair in front of the rear carrier / 3 pairs in the flat loading area, 1 pair of folding lashing eyes (LC 13,500 daN) on the front wall carrier, 3 pairs of folding lashing eyes (LC 10,000 daN) recessed in the outer frame, 8 interchangeable trough stops for lateral centering of the tipping troughs, 4 front trough stops plugged in with a swinging stop. Duomatic coupling head / 15-pin power supply Drawbar 2,100 mm plus 500 mm lowering device / 40 mm DIN towing eye Truck coupling height: approx. 780-980 mm Container length: 5,500 mm - 7,000 mm i.Li. or 2x 10 cbm ASK troughs or construction machine transport Gedpfx Aasugzqtsxebw Height: approx. 950 mm with unloaded vehicle (centering edge 970 mm) 20,000 kg GG technically possible Hüffermann Krandienst GmbH: we trade, we rent, we repair. Roll-off trailers, roll-off tippers, garbage collection vehicles, mobile cranes and work platforms... Talk to us! Do you need financing? We would be happy to provide you with a non-binding financing offer. The offer is subject to change, without warranty or guarantee. Subject to prior sale. A deposit of 10% of the purchase price is required for a reservation. Until the money is received, there is no reservation or claim to availability. The purchase is only finalized when payment is received. The vehicle remains the property of Hüffermann Krandienst GmbH until full payment is made. Payments are only accepted in euros at no additional cost to the seller and only by bank transfer or cash. No checks.

Condition: new, maximum load weight: 8,870 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-ER 11.9: * Tire Pressure Monitoring System (TPMS) * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 5.5 t Gigant axle assemblies * Parabolic suspension with compensation unit * Drawbar height adjustable by approximately 300 mm * Jost mechanical landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * Hot-dip galvanized chassis, drawbar, front wall, and rear wall * 50 mm softwood floor * Preparation for retrofitting 20" container locks at front and rear * Bolted front wall made of smooth sheet metal * Drop-down trapezoidal-profiled steel sheet side walls with drop-side spring assist * Screw-fastened, hot-dip galvanized rear stanchions * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Optional installation of 3 t drop lashing brackets every 600 mm (five lashing rings mounted on each side) * In the corners at the front and rear, one lashing ring each with 6.3 t capacity Godpfxjl Thy Ro Aaxjbw * Various holes in front and rear cross member for 1.2 t lashing options * 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Rear access storage compartment recessed under the loading area in the chassis * Drop-side color in RAL 9010 pure white * Painting of the side walls in any RAL color available for an extra charge * New vehicle without registration * Errors and prior sale excepted * Available from calendar week 48/2025

Condition: used, maximum load weight: 23,940 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 02/2017, next inspection (TÜV): 10/2025, Müller Mitteltal 3 axle low loader trailer with ramps type T3 Profi Total weight 24,000 / 30,000 kg Payload 17,940 / 23,940 kg Empty weight 6,060 kg Total length 10,800 mm Loading length 8,300 mm / loading bed 6,500 mm Loading height 900 mm Parabolic suspension Wider extensions with warning signs Large lashing package Long ramps with spring jack Tool box Storage box in offset Godsv Hl Riepfx Aaxebw Vehicle is available immediately. Other 3 and 4 axle low loader trailers, new and used, available immediately More information at:

Condition: used, maximum load weight: 14,000 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2013, loading space length: 6,800 mm, total width: 2,550 mm, total height: 1,400 mm, Year of construction: 2013, Equipment: ABS, ABS, EBS, automatic slack adjusters, 2x 10 to. axles (BPW), air suspension, drum brake, spring-loaded brake on the rear axle, pneumatically lowerable drawbar, release valve on the front axle, ratchet tensioner, hydraulic side clamp, closed storage box, two reversing lights, net box, spare wheel holder, closed side underride guard, fixed rear underride guard, rear skirt on the underride guard, folding A-plate, container size 2x10 cbm ASK skip. Hüffermann Krandienst GmbH: we trade, we rent, we repair. Roll-off trailers, roll-off tippers, refuse collection vehicles, mobile cranes and working platforms... Talk to us! Would you like financing? We will be happy to provide you with a non-binding financing offer. Gbjdpfxeuzdm Ae Aaxjw The offer is subject to change, without guarantee or warranty. Subject to prior sale. A deposit of 10% of the purchase price is required for a reservation. There is no reservation or entitlement to availability until payment has been received. The purchase is only concluded upon receipt of payment. The vehicle remains the property of Hüffermann Krandienst GmbH until full payment has been received. Payments are only accepted in euros without additional costs for the seller and only by bank transfer or cash payment. No checks.

Condition: new, maximum load weight: 31,630 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 9,250 mm, loading space width: 2,520 mm, * T 4: * EBS * Emergency release device for spring brake cylinders Gedpfx Aasl Th Evsxjbw * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle compensation, front and rear * Tire pressure monitoring with display option in the truck via EBS signal – no truck-side installation required * Warning sign packages at the front and rear * Reflective contour tape on the sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable rear LED beacon * 24 V – 15-pin and additional 12 V – 7+4 pin power cables * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm eye and stepless height adjustment * Toolbox made of powder-coated sheet steel and spare wheel holder in basket design, right side * Closed individual plastic mudguards at the front * Straight rear steel mudguards each with spray suppression (anti-spray system) * Side underrun protection * Extended offset bend, 500 mm to the front * Turntable platform extended by 520 mm at the front with 45° corners and 3 integrated, lockable storage compartments with lids * Chassis made of high-strength fine-grain steel * Decking over turntable platform made of 50 mm softwood, and 60 mm softwood on low-bed platform * Outer planks of the ramps made of 50 mm bamboo wood * Four side stake pockets each side (stakes not included), each with simultaneous 2 t lashing capability * Load securing package consisting of: 2 x 6.4 t lashing eyes (left and right front on main frame of the turntable platform), 1 pair 13.4 t lashing rings on the outer frame at front and rear, 4 pairs 10 t lashing rings on each side, swiveling and lowerable, loadable in every direction and integrated in the outer frame, 2 pairs 6.4 t lashing rings on the excavator arm rest area, 8 pairs zinc-plated fold-out outriggers for 3 m overall width (not on rear ramp slope) * Widening planks stored in compartment on left side * Excavator arm rest area above rear axle to end of approach slope approx. 2,300 x 740 x 190 mm * Mechanical drop legs at the rear * Hydraulic, hot-dip galvanized ramps approx. 3,000 x 720 mm * Hydraulically lateral ramp adjustment on sliding tube from ramp shaft * Loading area over turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loaded platform height approx. 860 mm (incl. 860 mm approach slope) * Chassis, turntable, ramps, and rear mechanical folding supports hot-dip galvanized * Axles, springs, air tanks, and turntable painted black * New vehicle with manufacturer warranty * Subject to errors and prior sale * Available from CW 46 / 2025

Condition: used, maximum load weight: 26,600 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2004, next inspection (TÜV): 08/2025, loading space length: 12,600 mm, loading space width: 2,500 mm, loading space height: 900 mm, total width: 2,520 mm, Müller Mitteltal 3 axle semi-trailer low loader Total weight: 35,000kg technically 41,000 kg Empty weight: 8,400kg Payload: 26,600kg technically 32,600 kg Total length: 13,700mm Loading length: total 12,600mm, gooseneck approx. 2,700mm/ roller slope approx. 1,400mm/ low bed approx. 8,500mm Width: 2,520mm Loading height: approx. 900mm Further information - Side walls gooseneck foldable - Tool box at the front 600mm - Spare wheel bulkhead - Last axle with caster steering Godpfxewtlkhe Aaxjbw - Air suspension - Split long ramps (2,300mm + 1,500mm), hydraulic. Side shift - BPW axles - Warning signs front + rear - Roller slope/gooseneck slope Other new and used low loader semi-trailers available. More information at

Condition: new, maximum load weight: 31,630 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 9,250 mm, loading space width: 2,520 mm, * T 4: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11-ton Gigant axles * Parabolic springs * Mechanical axle equalisation, front and rear * Tire pressure monitoring with in-cab readout via EBS signal – without truck-side installation * Warning panel kits at front and rear * Side and rear contour marking tape, reflective * EBS multi-voltage system for 12 & 24 V electrics * Removable rear LED beacon * 24 V 15-pin power cable and additional 12 V 7+4-pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and infinitely adjustable height * Toolbox made of powder-coated sheet steel and spare wheel holder in basket design, right side * Front closed single plastic mudguard * Straight rear steel mudguards with spray suppression * Lateral underrun protection * Offset extension 500 mm forward * Turntable platform extended by 520 mm to front, with 45° corners, 3 recessed lockable storage compartments incl. lids * Chassis made of high-tensile fine-grained steel * Floor above turntable platform: 50 mm softwood; in low-loader platform: 60 mm softwood * Outer planks of ramps made from 50 mm bamboo * 4 stake pockets per side (no stakes included), each with 2-ton lashing capacity * Load securing package consisting of: 2 x 6.4-ton lashing rings at front left/right on main frame of turntable platform, 1 pair 13.4-ton lashing rings each at front and rear external frame, 4 pairs per side 10-ton pivoting and lowering lashing rings, loadable in all directions and embedded in external frame, 2 pairs 6.4-ton lashing rings in excavator arm rest, 8 pairs galvanized folding extensions for 3m total width (not at rear slope) Gbjdpfx Aajrczm Dexow * Side deck boards for width extension stored in left side storage compartment * Excavator arm rest above rear axle to end of approach slope approx. 2,300 x 740 x 190 mm * Mechanical drop-down supports at rear * Hydraulic, hot-dip galvanized ramps approx. 3,000 x 720 mm * Hydraulically lateral ramp shifting on sliding tube from ramp shaft * Loading area over slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loading height loaded: approx. 860 mm (incl. approach slope) * Chassis, turntable, ramps, rear mechanical support feet hot-dip galvanized * Axles, springs, air tanks, and slewing ring painted in black shade * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from calendar week 46 / 2025

Condition: new, maximum load weight: 13,650 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, * TRA-Kombi 18.0: * Tire pressure monitoring (RDÜ), display option in the truck via EBS signal (without truck-side installation) * EBS-E (electric braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 10.5 axles * Air suspension with manual lowering at the rear * Pneumatically lowering tow bar, 2,100 mm long, with 40 mm towing eye and height adjustment device * Powder-coated sheet steel toolbox and basket-style spare wheel holder on the right side * Reflective contour strips on the sides and rear * Closed Side impact protection * Plastic quarter fenders with splash guards * Plastic bumper buffers at the rear * Foldable A-plate at the rear * Multi-chamber taillights * 15-pin power connector * Hot-dip galvanized main frame with raised outer frame for guiding the roll containers * Sheet steel floor with roller recesses in the bogie area * For roll-off container transport, container lengths of 5,500 - 7,000 mm are possible * Pneumatic 4-point clamp locking and mechanical plug-in stop angles at the front of the track Godpsl Tld Iofx Aaxsbw * Load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ is possible * Including 8 interchangeable skip stops for lateral centering of the skips, 4 front skip stops are plugged in with a swinging stop * 3 pairs of 10-ton skip stops Side UVV lashing rings for attaching tensioning elements for positive and non-positive securing of the troughs, 4 cloverleaf lashing bars (side) and 1 pair of 13.4 ton UVV lashing rings at the front. * Lasi package with additional 4 x 8 ton lashing rings embedded in the outer frame on each side. * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700. * Welded bead as an anti-slip surface in the runway area of the ramp. * Mechanical fall supports at the rear. * Aluminum docking ramps (10.6 ton / pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment at the rear). * --Maximum permissible weight of 20,000 kg. Possible-- * New vehicle without first registration with manufacturer's warranty * Errors and prior sale subject to change * Available from week 41/2025

Condition: new, maximum load weight: 13,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, * TRA-Kombi 18.0: * Load Securing Package (LASI-Paket) * Wabco * RDÜ Tire Pressure Monitoring System * EBS-E (electronic brake system) * Emergency release device for spring-loaded cylinders * 2 x 12 t Gigant axles * Parabolic springs * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm eye and height adjustment feature * Tool box made of powder-coated sheet steel, mounted right side * Reflective contour tape on sides and rear * Lateral underrun protection * Plastic quarter mudguards with spray protection * Storage box for container nets made of galvanized sheet metal, approx. 960 x 300 x 400 / 450 mm, right side * Plastic rear buffer * LED tail lights * 15-pin electrical connector * Hot-dip galvanized main frame with raised outer rails (approx. 25 mm raised) for roll container guidance * Steel sheet floor with roll pockets in the bogie/wheelset area * Suitable for transport of roll-off containers (Abrollbehälter) with length from 5,500 to 7,000 mm * Pneumatic 4-point clamping lock as well as mechanically insertable end stops at the front on the track, load securing certificate according to DIN 30722-1 * Possible to transport up to 2 skip containers (Absetzbehälter) with a maximum volume of 10 m³ * Including 8 repositionable skip end stops for lateral centering of skips, front 4 skip end stops pluggable with swiveling stop * 3 pairs of 10 t UVV lashing rings on the sides for attaching tie-down elements for positive and non-positive securing of skips, each with 4 side-mounted lashing beams in cloverleaf design and 1 pair of 13.4 t UVV lashing rings at the front, load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Weld bead as anti-slip coating in the running area of the ramp incline Gbjdpfx Aasl Thv Rsxew * Mechanical drop-down supports at the rear * 1 pair of aluminum loading ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear) * 235/75 R 17.5 twin tires * Unladen weight: 4,360 kg * Technically permissible gross weight: 20,000 kg * New vehicle with manufacturer warranty * Errors and prior sale excepted * Delivery time from week 48 / 2025

Condition: new, maximum load weight: 13,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, * TRA-Kombi 18.0: * Load securing package * Wabco * RDÜ tire pressure monitoring system * EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * 2 x 12 t Gigant axles * Parabolic springs * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment system * Toolbox made of powder-coated sheet steel, right side mounted * Reflective contour tape, side and rear * Side underrun protection Gbjdpfx Aajl Thwcsxow * Plastic quarter mudguards with spray protection * Storage box for container nets made of galvanized sheet metal approx. 960 x 300 x 400/450 mm, right side mounted * Rear plastic anti-collision buffer * LED tail lights * 15-pin electrical connector * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding container rollers * Steel floor with roller recesses in the bogie area * When transporting roll-off containers, container lengths of 5,500 – 7,000 mm possible * Pneumatic 4-point clamping lock as well as mechanical plug-in stops at the front of the travel path, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ each possible * With 8 repositionable skip stops for lateral centering, the front 4 are plug-in with pivotable end stop * 3 pairs of 10 t UVV lashing rings on the side for attaching tensioning devices for positive and non-positive securing of skips, 4 cloverleaf lashing brackets on each side, 1 pair of 13.4 t UVV lashing rings at the front; load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Weld seam as anti-slip coating in the inclined ramp area * Mechanical rear drop supports * 1 pair of aluminum access ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment at the rear) * 235/75 R 17.5 twin tires * Unladen weight: 4,360 kg * Technically permissible gross weight: 20,000 kg * New vehicle with manufacturer warranty * Errors and prior sale excepted * Available from CW 48 / 2025

Condition: new, maximum load weight: 13,650 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, * TRA-Kombi 18.0: * Tire pressure monitoring (RDÜ), display option in the truck via EBS signal (without truck-side installation) * EBS-E (electric braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 10.5 axles * Air suspension with manual lowering at the rear * Pneumatically lowering tow bar, 2,100 mm long, with 40 mm towing eye and height adjustment device Gsdel Tnwzepfx Aaxjbw * Powder-coated sheet steel toolbox and basket-style spare wheel holder on the right side * Reflective contour strips on the sides and rear * Closed Side impact protection * Plastic quarter fenders with splash guards * Plastic bumper buffers at the rear * Foldable A-plate at the rear * Multi-chamber taillights * 15-pin power connector * Hot-dip galvanized main frame with raised outer frame for guiding the roll containers * Sheet steel floor with roller recesses in the bogie area * For roll-off container transport, container lengths of 5,500 - 7,000 mm are possible * Pneumatic 4-point clamp locking and mechanical plug-in stop angles at the front of the track * Load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ is possible * Including 8 interchangeable skip stops for lateral centering of the skips, 4 front skip stops are plugged in with a swinging stop * 3 pairs of 10-ton skip stops Side UVV lashing rings for attaching tensioning elements for positive and non-positive securing of the troughs, 4 cloverleaf lashing bars (side) and 1 pair of 13.4 ton UVV lashing rings at the front. * Lasi package with additional 4 x 8 ton lashing rings embedded in the outer frame on each side. * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700. * Welded bead as an anti-slip surface in the runway area of the ramp. * Mechanical fall supports at the rear. * Aluminum docking ramps (10.6 ton / pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment at the rear). * --Maximum permissible weight of 20,000 kg. Possible-- * New vehicle without first registration with manufacturer's warranty * Errors and prior sale subject to change * Available from Egstorf, week 41/2025

Condition: new, maximum load weight: 13,650 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, * TRA-Kombi 18.0: * Tire pressure monitoring (RDÜ), display option in the truck via EBS signal (without truck-side installation) * EBS-E (electric braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 10.5 axles * Air suspension with manual lowering at the rear * Pneumatically lowering tow bar, 2,100 mm long, with 40 mm towing eye and height adjustment device * Powder-coated sheet steel toolbox and basket-style spare wheel holder on the right side * Reflective contour strips on the sides and rear * Closed Side impact protection Gsdpfx Ajwb Rakeaxsbw * Plastic quarter fenders with splash guards * Plastic bumper buffers at the rear * Foldable A-plate at the rear * Multi-chamber taillights * 15-pin power connector * Hot-dip galvanized main frame with raised outer frame for guiding the roll containers * Sheet steel floor with roller recesses in the bogie area * For roll-off container transport, container lengths of 5,500 - 7,000 mm are possible * Pneumatic 4-point clamp locking and mechanical plug-in stop angles at the front of the track * Load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ is possible * Including 8 interchangeable skip stops for lateral centering of the skips, 4 front skip stops are plugged in with a swinging stop * 3 pairs of 10-ton skip stops Side UVV lashing rings for attaching tensioning elements for positive and non-positive securing of the troughs, 4 cloverleaf lashing bars (side) and 1 pair of 13.4 ton UVV lashing rings at the front. * Lasi package with additional 4 x 8 ton lashing rings embedded in the outer frame on each side. * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700. * Welded bead as an anti-slip surface in the runway area of the ramp. * Mechanical fall supports at the rear. * Aluminum docking ramps (10.6 ton / pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment at the rear). * --Maximum permissible weight of 20,000 kg. Possible-- * New vehicle without first registration with manufacturer's warranty * Errors and prior sale subject to change * Available from week 41/2025

Condition: new, maximum load weight: 10,900 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: * RDÜ (Tire Pressure Monitoring) * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 ton Gigant axles * Air suspension * Drawbar height-adjustable by 300 mm - Drawbar extension by 250 mm to 2,250 mm * Jost support wind at the front * LED tail lights * External hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right outside the front wall * Side underride guard * Plastic quarter fenders * Hot-dip galvanized chassis as well as drawbar, front wall, rear wall, tailgate, and loading ramps * 50 mm softwood floor Gbsdpfx Aspk Dv Roaxjw * Device in front of the front wall for retrofitting container locks * Bolted front wall of smooth sheet metal * Side walls made of steel sheet - trapezoidal profiled - foldable with drop side lift * Steel rear wall, insertable between the ramp mountings, when not in use stored inside in front of the front wall * Rear stakes bolted * Perforated outer frame approx. 45 degrees angled with 2 ton lashing capacity every 480 mm, installation of 3 ton drop lashing brackets every 600 mm possible, in each corner front and rear 1 x 6.3 ton lashing ring, various holes for 1.2 ton lashing option in the front and end crossmember * One-piece mechanical grating loading ramps with spring system for one-man operation approx. 2,750 x 600 mm (can be compressed up to 20 mm) * Rear approach angle approx. 860 mm * --Reinforced and certified body according to EN 12642 XL including load securing certificate-- * Drop side color in RAL 9010 pure white * Painting of side walls in a RAL color for an additional charge possible * New vehicle with manufacturer's warranty * Errors and intermediate sale reserved * Immediately available from Egestorf

Condition: new, maximum load weight: 14,650 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Year of construction: 2024, * RS-T 18.0 / 018: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring * Emergency release device for spring-loaded cylinders * Disc brakes * Duomatic brake connection * 2 x 10 ton SAF axles * Air suspension with automatic lowering when the brake is uncoupled * Pull scissors 2,300 mm long with 40 mm towing eye and height adjustment via tension spring & spindle * Plastic tool box on the right side, closed. Plastic fenders * closed side impact protection as advertising space * underrun protection with 2 impact buffers * foldable A-sign at the rear for waste disposal * LED tail lights with protective roof * 2 x 7-pin power plugs * hot-dip galvanized chassis (without air tank, axles, pull scissors, etc.) * roller track length approx. 6,950 mm * roller container is clamped by pneumatic 4-way claw locking * there are 2 plug-in container stops at the front with 2 additional plug-in positions * driving height unloaded approx. 1,165 mm * -- permissible total weight of 20,000 kg technically possible-- * suitable for 5,000 - 7,000 mm container lengths * new vehicle with manufacturer's warranty Gedpfx Aaol Tqkwjxjbw * errors and prior sale subject to reservation * available immediately from Egestorf

Condition: new, maximum load weight: 14,680 kg, overall weight: 18,000 kg, axle configuration: 2 axles, Year of construction: 2025, * RA-T 18.0 / 018: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring * Emergency release device for spring-loaded cylinder * Disc brakes * 2 x 11 t Sauer axles * Air suspension (automatic lowering when the brake is uncoupled) * Tow bar approx. 2,300 mm long with 40mm towing eye and height adjustment via spring & turnbuckle * Plastic toolbox 450 x 470 mm, right side * Side net box 1,000 x 500 x 5000 mm * Closed plastic fenders FA & RA * Closed side underride protection as advertising space * Rear underride guard * Plastic bumper buffer, rear * Hazardous material sign, rear * 15-pin power connector * LED taillights * Track length approx. 6,830 mm * Pneumatic 4-way clamp lock * Mechanically adjustable stops (2 positions) front left and right on the tracks * 265/70 R 19.5 twin tires * 3,220 kg unladen weight * --Permitted total weight of 20,000 kg technically possible-- * Approx. 1,130 mm driving height loaded * Suitable for 5,500 – 7,000 mm container lengths * Hot-dip galvanized chassis * Air tank, axles, slewing ring and tow bar * New vehicle with manufacturer warranty Godpfov Nulzjx Aaxobw * Errors and prior sale excepted * Immediately available from Egestorf

Condition: new, maximum load weight: 12,080 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 3,900 mm, loading space width: 1,920 mm, loading space height: 415 mm, Year of construction: 2022, Equipment: ABS, * ETM-TA 14.4: * Wabco ABS braking system * Emergency release device for spring-loaded cylinders * Drum brakes, 2 x 7 tonnes. Gigant axles * Parabolic springs with tandem compensation unit * Height-adjustable drawbar (+/- 150 mm) with 40 mm screw drawbar eye * Jost support winch at the front, side impact protection * Foldable A-plate at the rear * 15-pin power plug, multi-chamber tail lights * Fixed steel front and side walls * Plug-in steel rear wall * Floor made of 50 mm softwood * 1 sliding plate support 750 x 1,000 mm in the front area including 2 trough stops at the front that can be plugged into 2 positions * 4 reversible trough stops that can be plugged into 2 positions for laterally centering the troughs * 1 x (13.5 ton) UVV lashing ring on each side for hanging tensioning elements * 2 ratchet tensioners (spindle adjustment) with compensation chain and quick shortener (tension force 6,300 kg) * Rear cross member for attaching aluminum ramps including 2 additional rear fall supports * Loading edge unloaded approx. 710 mm * Chassis, bulkhead, side walls, fender, drawbar, rear fall supports hot-dip galvanized * the axles, springs, support winch, air tank painted in a black tone * Tires: 285/70R19.5, wheelbase: 1,140 mm * Loading edge unloaded: approx. 710 mm, sold without container * Color hot-dip galvanized * Vehicle has a daily registration in 06/2024, due to missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer warranty * Errors and prior sale subject to reservation * available immediately from Egestorf on the A7 Gsdpfx Aael Th Eyjxsbw

Condition: new, maximum load weight: 8,870 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 11.9: * Loading area 6.27 m * Suitable for container transport * RDÜ tire pressure monitoring * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes, 2 x 5.5 tonnes. BPW axles * Parabolic springs with compensating unit * Drawbar height adjustable by 300 mm * Jost landing gear at the front * External hot-dip galvanized folding supports at the rear * Plastic quarter fenders * LED lighting * Hot-dip galvanized chassis, drawbar, bulkhead, rear wall, rear stanchions, and loading ramps * 50 mm softwood floor * Device for retrofitting container locks in front of the bulkhead * Bolted smooth sheet metal bulkhead * Foldable trapezoidal steel side walls with side wall spring lifter * Steel rear wall can be inserted between the ramp brackets when not in use, inside the bulkhead * Bolted rear stanchions * Perforated outer frame, angled at approximately 45 degrees with a 2-ton lashing capacity every 480 mm * Installation of 3-ton Drop lashing rings available every 600 mm * 1 x 6.3 ton lashing ring in each of the front and rear corners Gbjdpfjrvvfwox Aaxjw * Various holes in the front and end beams for 1.2 ton lashing options * One-piece mechanical loading ramps with spring mechanism for one-person operation, approx. 2,750 x 600 mm (can be collapsed to within 20 mm) * Rear approach slope approx. 860 mm * Wheelbase: 990 mm * Tires: 235/75R17.5 * Side walls painted in RAL 9010 pure white * Side walls painted in a RAL color available for an additional charge * Plastic toolbox * Subject to errors and prior sale * Available for immediate delivery from Egestorf