Low loader trailer

Müller-Mitteltal T 3 Kompakt 30,0, Hydr. Rampen, Verbr. auf 3m

Condition: new, empty load weight: 6,600 kg, maximum load weight: 17,400 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 6,500 mm, total length: 10,900 mm, suspension: steel, tire size: 235/75 R17,5 (Doppelbereifung), color: silver, gearing type: mechanical, fuel consumption (urban): 1,090 l/100km, Empty weight: 6600kg, permissible total weight: 24000kg, loading space length: 6,500 mmTire size: 235/75 R17.5, 1st axle: , 2nd axle: , 3rd axle: , leaf spring suspension, 3 axle low loader trailer with offset DTS-S 300 - bogie with strong ball bearing ring - foldable rear support - 1 spare wheel holder for 1 electric bike, with wheel fastening kit - 1 spare wheel, same make as basic tires, steel rim - 1 plastic tool box - extensions extendable to 3000mm (not in rear bevel) - storage compartment for wooden planks in the middle of the low load area - wooden planks 70mm for extension to 3000mm Lashing eyes low loader: - with spring jack Support axles + suspension: - SAF - drum brake axles - Parabolic suspension with maintenance-free steel-rubber bearings and mechanical axle load compensation (rocker compensation) Brake system: - 2-line compressed air brake system - Spring-loaded parking brake Electrics: - 24 volt, multi-chamber lights, yellow LED lighting on the side - 1 LED rotating beacon with holder, switched via parking light (light removable) - 2 pairs of warning signs with double LED lighting and extendable to 3000 mm Floor: - Storage box embedded in the crossing slope to the crank - then with 70 mm softwood floor, steel / checker plate covering in the wheel arch area - Rear bevel with 70 mm softwood floor Loading ramps: Steel ramps 2,800 mm long, 750 mm wide, laterally movable, covered with wood - - 1 pair of ring lashing eyes embedded on the crank at the front, 10 tonnes - 4 pairs of lashing holes in the AR with 5 tonnes each for tensioning belt attachment - 7 pairs Lashing eyes at the top and sides of the outer frame, 10 tonnes each - 1 x at the front on the crank, 6 x in the low bed - 5 pairs of stake pockets in the outer frame, inside 70x40 mm (can be converted to 5 tonne ring lashing eyes for an additional charge) - 2 pairs of additional folding lashing eyes, 10 tonnes each, 1x at the front on the crank, 1x behind the 3rd axle, axles + suspension: - SAF - drum brake axles - parabolic suspension with maintenance-free steel-rubber bearings and mechanical Ac Gbjdpfxjtcwkre Ah Deh

Condition: used, Year of construction: 2008, operating hours: 5,332 h, Intended use: Construction Unladen weight: 6,800 kg Engine brand: Cat CD9I Gbsdpfjrnmvcjx Ah Deh Throughput: 22 m³/m Compressor type: Screw compressors Transport dimensions (L x W x H): 5.6x2.1x2.4 Working pressure: 21 bar Contact Sales Department for more information.

Condition: used, Year of construction: 2008, operating hours: 9,214 h, Intended use: Construction Unladen weight: 7,555 kg Engine brand: Caterpillar C18 Gedpfjutzrljx Ah Debh Throughput: 33.6 m³/m Compressor type: Screw compressors Transport dimensions (L x W x H): 6.5x2.2x3 Working pressure: 30 bar Contact Sales Department for more information.

Condition: new, maximum load weight: 23,800 kg, overall weight: 30,000 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and short-term available units on our website. Selection of equipment features. Full equipment specification available on request. Weights: * Permissible gross weight: 24 t * Technical gross weight: 30 t Dimensions: * Approx. 2,100 mm = raised front platform incl. gooseneck, corners beveled * Approx. 5,350 mm = low-bed deck – level loading area * Approx. 850 mm = rear ramp slope * Overall width approx. 2,550 mm (or up to approx. 3,000 mm with extensions) * Loaded loading height approx. 870 mm * When assembling a combination, please observe the legally permitted overall height and total length. Frame: * Steel welded construction with front gooseneck and rear bevel * Rear ramp slope with central excavator shovel recess = rear recess between longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 5 pairs of approx. 4 t lashing points (4x in the low-bed, 1x on the raised platform) * 7 pairs of recessed, pull-out 10 t lashing rings (4x in the low-bed, 1x on the ramp slope, 2x on the raised platform) * Standard ball bearing turntable Frame Attachments: * Both sides of the low-bed deck with extendable width extensions with approx. 50 mm softwood planks (track width of construction machinery to be transported must not exceed the outer frame width of approx. 2,550 mm) * 4 pairs of folding approx. 10 t lashing rings, distribution: 1 pair at the front on the raised platform, between the longitudinal beams; 1 pair at the very rear in the excavator shovel recess, left and right; 1 pair at the front of the raised platform before the gooseneck, between the longitudinal beams; 1 pair in the rear low-bed ahead of the ramp slope, in the shovel recess left + right Towing Device: * Fixed drawbar with swivel towing eye approx. 40 + 50 mm, cranked version, silent bush mounting, drawbar retaining spring with tensioner * Truck coupling height approx. 830 mm to approx. 1,030 mm * Drawbar length approx. 1,800 mm Support Device: * 2 automatic folding supports at the rear Axles: * 3 SAF air suspension low-loader axles with drum brakes Gbjdpfx Ahswx Dcyj Dsh * Load capacity: 11 t per axle * S-cam drum brakes approx. 300/200 mm * Automatic brake slack adjusters Wheels: * 12 tires 235/75 R 17.5, 141J, brand per factory selection * 12 steel rims 6.75 x 17.5, with preset offset, silver Brake System/Suspension: * Dual-line compressed air brake system according to ECE directive R13 * Brake system by Wabco * EBS system 4S3M, 1st and 2nd axles with sensors * RSS/RSP – stability control * Spring-actuated parking brake on 2nd and 3rd axles * Steel air tank * Brake/air supply lines with two single coupling heads, yellow/red * EBS/ABS connection cable * Retainer rubber for EBS and electrical connectors * Air suspension with lift and lowering device (rear axles only), automatic ride height adjustment from 15 km/h (RTR), front axle mechanical stop Floor: * Approx. 50 mm impregnated softwood flooring, protruding approx. 5–10 mm above upper edge of frame, steel checker plate cover over the wheels Ramps: * 2 foldable single-piece lightweight steel drive-on ramps, approx. 2,800 mm long, approx. 750 mm wide, with impregnated hardwood inserts approx. 35 mm * Ramp spacing adjustable from approx. 350 mm up to max. total width of approx. 3,000 mm * Ramps lockable in driving position by chains with tensioners * Ramp lifting aid with spiral spring * Ramps laterally adjustable manually with bar * Square ribs welded on the

Condition: used, machine/vehicle number: GE12/084/2023, empty load weight: 7,000 kg, maximum load weight: 17,000 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 07/1998, suspension: steel, Equipment: center pivot plate, 1st hand vehicle Golfhofer TU3-24/80 Low loader Checkbook maintained inspection book hydr. ramps Payload - 17000 kg Lashing eyes in the cargo area Commercial/export net price - 9990 € Gbodpomx U Dpjfx Ah Dsh Subject to alterations, prior sale and errors reserved ===== Telephone Mobile phone =====

Condition: used, Year of construction: 2000, operating hours: 9,927 h, Intended use: Construction Unladen weight: 6,500 kg Engine brand: Mercedes OM441 LA Capacity: 22.3 m³/min Gbsdpfx Ahoxw Nddj Dsh Working pressure: 20 bar For further information, please contact the Sales Department.

Condition: used, Year of construction: 2002, operating hours: 3,066 h, General information Intended use: Construction Drive train Engine brand: Deutz Weights Unladen weight: 1,880 kg Functional Throughput: 12 m³/m Condition General condition: average Technical condition: average Gsdpfeq Eblyox Ah Dsbh Visual condition: average Other information: average Compressor type: Screw compressors Transport dimensions (L x W x H): 2.75x1.5x1.25 Working pressure: 7 bar For further information Contact the Sales Department for further information.

Condition: used, fuel type: diesel, Year of construction: 2011, operating hours: 7,480 h, motor manufacturer: Perkins, Application: Construction Gbsdpfx Aoutz U Hjh Deh Generator output: 100 kVA Contact the Sales Department for further information.

Condition: new, maximum load weight: 30,740 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Year of construction: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lift/lower system and RtR valve * Smard board for payload weight determination * Warning sign packages front & rear Gbsdpfx Asl Tphroh Djh * Reflective contour tape on the sides and rear * Rear removable beacon light * LED lighting * Straight drawbar with 50 mm towing eye and continuously variable height adjustment * Tool box made of powder-coated sheet steel and spare wheel holder in basket design, fitted on the right side * Front closed single fender made of plastic * Rear straight steel mudguard aprons, each with spray protection (spray suppression) * Side underrun protection * Turntable platform extended by 520 mm with 45° corners and three integrated storage compartments incl. lids, lockable * Chassis made of high-strength fine-grain steel * Flooring above turntable platform made of 50 mm and in low-bed platform of 60 mm softwood * Outer planks of access ramps made of hardwood * 4 stake pockets per side (stakes not included), each with 2 t lashing point * Lashing package consisting of: 2 lashing eyes 6.4 t at the front left and right on the main frame of the turntable platform * On each side front and rear: 2 pairs of 13.4 t lashing rings on the outer frame, and 4 pairs of 10 t lashing rings per side, swiveling and retractable * Loadable in all directions and recessed into the outer frame * 2 pairs of 6.4 t lashing rings in the excavator arm recess * 8 pairs of galvanized folding outriggers for 3 m total width (except for the rear slope) * Widening planks stored in a box on the left side * Excavator arm recess above the rear axle up to the start of the ramp incline: approx. 2,100 x 740 x 190 mm * Mechanical support legs at rear * Hydraulic folding ramps with hydraulically extendable tip section approx. 4,650 x 720 mm incl. hydraulic ramp lateral shift & load holding valve * Load area above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loaded deck height: approx. 890 mm, +/- 20 mm (incl. 860 mm ramp incline) * Flow divider installed * Chassis, turntable, access ramps, folding outriggers, and mechanical support legs hot-dip galvanized * Axles, drawbar, air tanks and turntable painted in black * Tires: 235/75 R 17.5 * New vehicle without initial registration with manufacturer’s warranty * Errors and prior sale reserved * Available from CW 07/2026

Condition: used, mileage: 104,296 km, power: 225 kW (305.91 HP), fuel type: diesel, gearing type: automatic, first registration: 05/2017, CO₂ emissions: 185 g/km, emission class: euro6, color: green, number of seats: 2, number of previous owners: 1, Year of construction: 2017, Equipment: air conditioning, central locking, cruise control, navigation system, parking sensors, power assisted steering, = Additional Options and Equipment = - Automatic dipped headlights - Remote central locking - Height-adjustable driver’s seat - Height-adjustable steering wheel - Keyless start - Air conditioning - Leather steering wheel - Leather gear knob - Alloy wheels - Multifunction steering wheel Gbsdpfxeydp H Ho Ah Dsh - Front and rear parking sensors - Radio/CD player - Reversing camera - Paddle shifters - Bluetooth-enabled telephone = Further Information = General Information Number of doors: 5 Model year: 2026 Technical Information Number of cylinders: 6 Engine displacement: 2,993 cc Weights Unladen weight: 2,333 kg Payload: 717 kg Gross vehicle weight (GVW): 3,050 kg Max. towing capacity: 3,500 kg (unbraked 750 kg) Interior Upholstery: Leather Fuel Consumption Average fuel consumption: 7 l/100km Urban fuel consumption: 7.9 l/100km Extra-urban fuel consumption: 6.4 l/100km Product Safety Manufacturer: Derks Bedrijfswagens B.V. Belgenlaan 7, 5406XN UDEN, NL