Used Meiller Three-Way Tipper Trailers for sale (147)

Condition: new, overall weight: 18,000 kg, maximum load weight: 12,900 kg, axle configuration: 2 axles, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 900 mm, Year of construction: 2025, Equipment: ABS, * Wabco EBS-E / ABS (electronic braking system with RSS) * Emergency release device for spring-loaded cylinders * Drum brakes 420 x 180 mm with asbestos-free brake pads and closed brake drums * Tire Pressure Monitoring System (TPMS) * 2 x 9-ton SAF axles * Air suspension, automatic rapid lowering during tipping to increase stability (can be switched off for pavers) * Aluminum air reservoir * Welded box-type steering rod * Y-shaped drawbar with 50 mm flanged eyelet, height-adjustable via the head plate Cjbu E Iswhhw He Tasgt * Jost landing gear at the front * Underrun protection at the rear * 15-pin power connector * 5-chamber tail lights with protective roof * Closed Single plastic fenders * Steel 3-way tipping body with M-Jet side walls * Front wall made of 3 mm STEELECT 240 steel * Side walls with sturdy, inward-sloping upper chords * Side walls and tailgate made of 4 mm STEELECT steel (HBW 400) * Continuous side walls - without center stanchion - * Right side wall swings via manual central locking - prepared for long levers and hinges for the foldable side wall - * Hydraulically foldable left side wall (Bordmatik) * Tailgate swings with automatic cam lock and 150 mm rear chute * Manual dosing system via chain * 5 mm deck floor made of STEELECT steel (HBW 450 steel) * Electric sliding tarpaulin (RAL 9006) operated via radio remote control or manual control. Switch can be operated on the trailer * 600 mm front roof on the bulkhead as a tarpaulin support for the sliding tarpaulin * Vehicle body complies with EN 12642 XL, * Chassis painted in RAL 7021 black-grey * Side walls painted in RAL 9006 white aluminum * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from 29/2025 * Sample images may vary

Condition: used, overall weight: 18,000 kg, maximum load weight: 13,160 kg, axle configuration: 2 axles, loading space volume: 10 m³, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 900 mm, first registration: 04/2025, Equipment: ABS, ? 9 t each (technical axle load) ? Drum brake, size 420 x 180 mm, with asbestos-free brake pads and enclosed brake drum ? Offset ET0 (S-hub) ? Welded box-type link ? Standard wheel studs ? Electronically controlled dual-circuit compressed air braking system (EBS E+RSS) in accordance with EC regulations with automatic load-sensing brake valve (ALB), spring-loaded cylinder, and two interchangeable coupling heads ? ABS 2S/2M (Wabco), with connecting lines ? Electronically controlled air suspension (ECAS) with automatic rapid lowering during tipping to increase stability, can be deactivated for pavers ? Tires 385/65 R 22.5 profile S ? Painted steel rims ? Tire pressure monitoring system (TPMS) in accordance with EU regulation UN ECE-R 141 ? Half-shell fenders with splash guard mat ? Plastic fenders ? Rigid underrun protection according to ECE R-58 (R58-03) ? Floor: 5 mm HBW 450 (Hardox 450 or equivalent) ? Bulkhead: 3 mm BS 70 ? Left sidewall: 4 mm HBW 400 (Hardox 400 or equivalent), M-JET ? Right sidewall: 4 mm HBW 400 (Hardox 400 or equivalent), M-JET ? Rear wall: 4 mm HBW 400 (Hardox 400 or equivalent), M-JET ? Swinging and foldable left sidewall with spring relief ? Swinging right sidewall ? Spring relief on the left sidewall ? Swinging rear wall Cgsbu E I Towgucgsaet ? Rear wall with cam lock ? Fixed rear corner pillars ? Fixed left front corner pillar ? 150 mm long, fixed, straight discharge chute ? Safety support for the tipping body ? Dosing device with chains ? Access ladder on the left side of the bulkhead ? Without tow coupling ? Two interchangeable coupling heads with integrated line filters ? Aluminum air reservoir ? 7-pin ABS connection cable for EBS braking system ? 1 x 15-pin front adapter according to ISO 12098. Note: The towing vehicle must be equipped with a 15-pin socket according to ISO/DIS 12098. ? 1 x 15-pin electrical connection cable (Wendelflex) ? Hydraulic oil filled with HLPD-22 mineral oil. Note: Not in conjunction with kit shipping. ? Chassis frame painted (base frame, axle supports, and underrun protection - excluding attachments) in standard colors (all colors except metallic and special colors). ? Chassis frame color: black, standard color. ? Tipping body color: orange. ? Individual approval (e.g., TÜV or DEKRA) or COC ? Contour markings according to EC: white on the sides, yellow on the rear ? Manufacturer's confirmation ? COC Note: The COC is not yet available for all MEILLER products ? 1-year warranty period excluding annual inspections (UVV inspections) ? 24-volt five-chamber lights with integrated, triangular reflectors according to ECE-R 48, including lamp guards ? MEILLER standard axles (SAF or BPW) ? Floor-level, foldable lashing eyes (2 t) and plug-in lashing eyes (8 t) in the corners of the tipper body floor. Note: For retrofitted access steps, the specifications of Appendix 2 of DGUV Regulation 70 # Vehicles must be observed. ? PREVANTEC S package consisting of a swinging and foldable left side panel and floor-level, foldable lashing eyes (2 t) as well as plug-in lashing eyes (8 t) in the corners of the tipper body floor in accordance with DIN EN 12640. Note: For retrofitted access points, the specifications of Appendix 2 of DGUV Regulation 70 # Vehicles must be observed. ? Tipper body width 2,380 mm Reference vehicle, similar to the illustration Similar to the illustration. All information without guarantee / subject to prior sale.

Condition: used, overall weight: 18,000 kg, maximum load weight: 13,370 kg, axle configuration: 2 axles, loading space length: 4,700 mm, loading space width: 2,400 mm, loading space height: 1,000 mm, first registration: 03/2005, next inspection (TÜV): 05/2025, total width: 2,500 mm, Meiller 3-sided gravel tipper 18 ton type MZDA 18/21 Vehicle number: 25576 Cgobsvu N Sysu E I Tast Vehicle / body: tipping trough First registered: 03/05 HU: 05/25 Total weight: 18,000kg Empty weight: 4,630kg Payload: 13,370 Total length: 7,200mm Loading length: 4,700m Width: 2,500mm Loading space width: 2,400mm Loading height: 1,000mm Further information: - Air suspension - Underrun protection - BPW axles - Tires: 425/65 R22.5

Condition: used, overall weight: 18,000 kg, empty load weight: 4,520 kg, maximum load weight: 13,480 kg, axle configuration: 2 axles, loading space length: 4,800 mm, loading space width: 2,300 mm, loading space height: 1,000 mm, first registration: 02/2007, next inspection (TÜV): 04/2024, suspension: air, tire size: 385 / 65 R 22,5, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, aluminum body, 2-axle, BPW axles, tandem, air suspension, ABS (anti-lock braking system), roller tarpaulin Body: 3-sided tipper, split aluminum drop sides, oscillating, drum brakes ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Cgjbujr H E Rxs E I Taot - .

Condition: new, overall weight: 18,000 kg, maximum load weight: 13,150 kg, axle configuration: 2 axles, loading space length: 4,900 mm, loading space width: 2,420 mm, loading space height: 900 mm, Year of construction: 2025, Equipment: ABS, * Wabco EBS-E / ABS (electronic braking system with RSS) * Emergency release device for spring-loaded cylinders * Drum brakes 420 x 180 mm with asbestos-free brake pads and closed brake drums * Tire Pressure Monitoring System (TPMS) * 2 x 9-ton SAF axles * Air suspension * Automatic rapid lowering during tipping to increase stability (can be switched off for pavers) * Aluminum air reservoir * Welded box-type steering rod * Offset central tube drawbar with height-adjustable 50 mm flange towing eye (tipping via the drawbar is possible, but the tipping angle is limited and depends on the towing vehicle) * Jost landing gear at the front * Underrun protection at the rear * 15-pin power connector Cobu E Ijwhhwas Taogt * 5-chamber tail lights with protective roof * Closed Single plastic fenders * Steel pallet 3-way tipping body with M-Jet side walls * Front wall made of 3 mm STEELECT 240 steel * Side walls with sturdy, all-round, inward-sloping top flange * Side walls and tailgate made of 4 mm STEELECT steel (HBW 450) * Continuous side walls - without center stanchion - * Right side wall swings via manual central locking - prepared for long levers and hinges for the foldable side wall * Left side wall swings via manual central locking and folds down with side wall spring lift * Tailgate swings with automatic cam lock and 150 mm rear chute * Manual dosing device via chain * 5 mm deck floor made of STEELECT steel (HBW 450 steel) * 5 side wall lashing eyes on the top flange and 4 x 2 tonne lashing eyes on each side. Foldable lashing eyes in the floor * Plug-in 8-ton lashing eyes in the corners of the floor, access ladder on the front left outside of the bulkhead * Vehicle body complies with EN 12642 XL * Chassis painted in RAL 7021 black-grey * Side walls painted in RAL 9006 white aluminum * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from 29/2025 * Sample images may vary

Condition: new, overall weight: 18,000 kg, maximum load weight: 13,160 kg, axle configuration: 2 axles, loading space volume: 10 m³, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 900 mm, Equipment: ABS, ? 9 t each (technical axle load) ? Drum brake, size 420 x 180 mm, with asbestos-free brake pads and enclosed brake drum ? Offset ET0 (S-hub) ? Welded box-type link ? Standard wheel studs ? Electronically controlled dual-circuit compressed air braking system (EBS E+RSS) in accordance with EC regulations with automatic load-sensing brake valve (ALB), spring-loaded cylinder, and two interchangeable coupling heads ? ABS 2S/2M (Wabco), with connecting lines ? Electronically controlled air suspension (ECAS) with automatic rapid lowering during tipping to increase stability, can be deactivated for pavers ? Tires 385/65 R 22.5 profile S ? Painted steel rims ? Tire pressure monitoring system (TPMS) in accordance with EU regulation UN ECE-R 141 ? Half-shell fenders with splash guard mat ? Plastic fenders ? Rigid underrun protection according to ECE R-58 (R58-03) ? Floor: 5 mm HBW 450 (Hardox 450 or equivalent) ? Bulkhead: 3 mm BS 70 ? Left sidewall: 4 mm HBW 400 (Hardox 400 or equivalent), M-JET ? Right sidewall: 4 mm HBW 400 (Hardox 400 or equivalent), M-JET ? Rear wall: 4 mm HBW 400 (Hardox 400 or equivalent), M-JET ? Swinging and foldable left sidewall with spring relief ? Swinging right sidewall ? Spring relief on the left sidewall ? Swinging rear wall ? Rear wall with cam lock ? Fixed rear corner pillars ? Fixed left front corner pillar ? 150 mm long, fixed, straight discharge chute Cgjbjwgucmsu E I Taet ? Safety support for the tipping body ? Dosing device with chains ? Access ladder on the left side of the bulkhead ? Without tow coupling ? Two interchangeable coupling heads with integrated line filters ? Aluminum air reservoir ? 7-pin ABS connection cable for EBS braking system ? 1 x 15-pin front adapter according to ISO 12098. Note: The towing vehicle must be equipped with a 15-pin socket according to ISO/DIS 12098. ? 1 x 15-pin electrical connection cable (Wendelflex) ? Hydraulic oil filled with HLPD-22 mineral oil. Note: Not in conjunction with kit shipping. ? Chassis frame painted (base frame, axle supports, and underrun protection - excluding attachments) in standard colors (all colors except metallic and special colors). ? Chassis frame color: black, standard color. ? Tipping body color: orange. ? Individual approval (e.g., TÜV or DEKRA) or COC ? Contour markings according to EC: white on the sides, yellow on the rear ? Manufacturer's confirmation ? COC Note: The COC is not yet available for all MEILLER products ? 1-year warranty period excluding annual inspections (UVV inspections) ? 24-volt five-chamber lights with integrated, triangular reflectors according to ECE-R 48, including lamp guards ? MEILLER standard axles (SAF or BPW) ? Floor-level, foldable lashing eyes (2 t) and plug-in lashing eyes (8 t) in the corners of the tipper body floor. Note: For retrofitted access steps, the specifications of Appendix 2 of DGUV Regulation 70 # Vehicles must be observed. ? PREVANTEC S package consisting of a swinging and foldable left side panel and floor-level, foldable lashing eyes (2 t) as well as plug-in lashing eyes (8 t) in the corners of the tipper body floor in accordance with DIN EN 12640. Note: For retrofitted access points, the specifications of Appendix 2 of DGUV Regulation 70 # Vehicles must be observed. ? Tipper body width 2,380 mm Reference vehicle, similar to the illustration Similar to the illustration. All information without guarantee / subject to prior sale.

Condition: used, overall weight: 18,000 kg, empty load weight: 4,520 kg, maximum load weight: 13,480 kg, axle configuration: 2 axles, loading space volume: 11 m³, loading space length: 4,800 mm, loading space width: 2,350 mm, loading space height: 1,000 mm, first registration: 02/2007, next inspection (TÜV): 06/2024, suspension: air, tire size: 385 / 65 R 22,5, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, aluminum body, 2-axle, BPW axles, tandem, air suspension, ABS (anti-lock braking system), roller tarpaulin Body: 3-sided tipper aluminum drop sides divided & oscillating approx. 11m³ 2x 9t BPW axles, drum brakes! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Cobu E I Tevhmbreajgt - .

Condition: new, overall weight: 18,000 kg, maximum load weight: 13,100 kg, axle configuration: 2 axles, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 900 mm, Year of construction: 2025, Equipment: ABS, * Wabco EBS-E / ABS (electronic braking system with RSS) * Emergency release system for spring-loaded cylinders * Drum brakes 420 x 180 mm with asbestos-free brake pads and closed brake drums * Tire pressure monitoring system (TPMS) * 2 x 9-ton SAF axles * Automatic air suspension Quick lowering during tipping to increase stability (can be switched off for pavers) * Aluminum air tank, welded box-type steering rod * Offset central tube drawbar with height-adjustable 50 mm flange towing eye (tilting via the drawbar is possible, but the tipping angle is limited and depends on the towing vehicle) * Jost landing gear at the front * Rear underrun protection * 15-pin power connector * 5-chamber tail lights with protective roof * Closed plastic single fenders * Steel 3-way tipping body with M-Jet side walls * Front wall made of 3 mm STEELECT 240 steel * Side walls with sturdy, all-round, inward-sloping top flange * Side walls and tailgate made of 4 mm STEELECT steel (HBW 400) * Continuous side walls - without center stanchion - * Right side wall swings via manual central locking - prepared for long lever and hinges for folding side panels * Hydraulically folding left-hand side panel (on-board system) Cjbu Ejwhhv Ne I Taogt * Swinging tailgate with automatic cam lock and 150 mm rear chute * Manual dosing system via chain * 5 mm deck made of STEELECT steel (HBW 450 steel) * Vehicle body complies with EN 12642 XL * Chassis painted in RAL 7021 black-grey * Side panels painted in RAL 9006 white aluminum * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from 29/2025 * Sample images may vary

Condition: new, overall weight: 18,000 kg, maximum load weight: 13,160 kg, axle configuration: 2 axles, loading space volume: 10 m³, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 900 mm, Year of construction: 2025, Equipment: ABS, ? 9 t each (technical axle load) ? Drum brake, size 420 x 180 mm, with asbestos-free brake pads and enclosed brake drum ? Offset ET0 (S-hub) ? Welded box-type link ? Standard wheel studs ? Electronically controlled dual-circuit pneumatic brake system (EBS E+RSS) according to EC regulations with automatic load-sensing brake valve (ALB) spring-loaded cylinders and two interchangeable coupling heads ? ABS 2S/2M (Wabco), with connecting lines ? Electronically controlled air suspension (ECAS) with automatic rapid lowering during tipping to increase stability, can be deactivated for pavers ? Tires 385/65 R 22.5 profile S ? Painted steel rims ? Tire pressure monitoring system (TPMS) according to EU regulation UN ECE-R 141 ? Half-shell fenders with splash guard mat ? Plastic fenders ? Rigid underrun protection according to ECE R-58 (R58-03) ? Floor: 5 mm HBW 450 (Hardox 450 or equivalent) ? Bulkhead: 3 mm BS 70 ? Left sidewall: 4 mm HBW 400 (Hardox 400 or equivalent), M-JET ? Right sidewall: 4 mm HBW 400 (Hardox 400 or equivalent), M-JET ? Rear wall: 4 mm HBW 400 (Hardox 400 or equivalent), M-JET ? Swinging and foldable left sidewall with spring relief ? Swinging right sidewall ? Spring relief on the left sidewall ? Swinging rear wall ? Rear wall with cam lock ? Fixed rear corner pillars ? Fixed left front corner pillar ? 150 mm long, fixed, straight discharge chute ? Safety support for the tipping body ? Dosing device with chains ? Access ladder on the left side of the bulkhead ? Without tow coupling ? Two interchangeable coupling heads with integrated line filters ? Aluminum air reservoir ? 7-pin ABS connection cable for EBS braking system ? 1 x 15-pin front adapter according to ISO 12098 Note: The towing vehicle must be equipped with a 15-pin socket according to ISO/DIS 12098 ? 1 x 15-pin electrical connection cable (Wendelflex) ? Hydraulic oil filled with HLPD-22 mineral oil Note: Not in conjunction with kit shipping ? Chassis frame painted (base frame, axle supports, and underrun protection - excluding attachments) in standard colors (all colors except metallic and special colors) ? Chassis frame color: black-gray RAL 7021 ? Tipper body paint finish: standard color ? Tipper body color: pure white RAL 9010 ? Individual approval (e.g., TÜV or DEKRA) or COC ? Contour markings according to EC: white on the sides, yellow at the rear ? Manufacturer's confirmation ? COC Note: The COC is not yet available for all MEILLER products ? 1-year warranty period, excluding annual inspections (UVV tests) Cjbewfk Rdsu E I Taogt ? 24-volt five-chamber lights with integrated, triangular reflectors according to ECE-R 48, including lamp guards ? MEILLER standard axles (SAF or BPW) ? Floor-level, foldable lashing eyes (2 t) and plug-in lashing eyes (8 t) in the corners of the tipper body floor Note: For retrofitted access steps, the specifications of Appendix 2 of DGUV Regulation 70 # Vehicles must be observed ? PREVANTEC S package consisting of a swinging and foldable left side panel and floor-level, foldable lashing eyes (2 t) as well as plug-in lashing eyes (8 t) in the corners of the tipper body floor in accordance with DIN EN 12640. Note: For retrofitted access points, the specifications of Appendix 2 of DGUV Regulation 70 # Vehicles must be observed. - Tipper body width 2,380 mm All information without guarantee / Subject to prior sale.

Condition: used, overall weight: 18,000 kg, empty load weight: 4,420 kg, maximum load weight: 13,580 kg, axle configuration: 2 axles, loading space length: 4,800 mm, loading space width: 2,300 mm, loading space height: 1,000 mm, first registration: 04/2006, next inspection (TÜV): 10/2024, suspension: air, tire size: 385 / 65 R 22,5, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, aluminum body, 2-axle, BPW axles, tandem, air suspension, ABS (anti-lock braking system), roller tarpaulin, folding U-protection Cebu E I Tor H E Ruoasgt Body: 3-sided tipper, oscillating aluminum drop sides, drum brakes. ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: new, overall weight: 18,000 kg, maximum load weight: 13,200 kg, axle configuration: 2 axles, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 900 mm, Year of construction: 2025, Equipment: ABS, * Wabco EBS-E / ABS (electronic braking system with RSS) * Emergency release device for spring-loaded cylinders * Drum brakes 420 x 180 mm with asbestos-free brake pads and closed brake drums * Tire Pressure Monitoring System (TPMS) * 2 x 9-ton SAF axles * Air suspension, automatic rapid lowering during tipping to increase stability (can be switched off for pavers) * Aluminum air reservoir * Welded box-type steering rod * Y-shaped drawbar with 50 mm flanged eyelet, height-adjustable via the head plate * Jost landing gear at the front * Underrun protection at the rear * 15-pin power connector * 5-chamber tail lights with protective roof * Closed Single plastic fenders * Steel 3-way tipping body with M-Jet side walls Cgsbujwhhv Ae E I Tajt * Front wall made of 3 mm STEELECT 240 steel * Side walls with sturdy, inward-sloping upper chords * Side walls and tailgate made of 4 mm STEELECT steel (HBW 400) * Continuous side walls - without center pillar - * Right side wall swings via manual central locking - prepared for long levers and hinges for folding side walls - * Left side wall swings via manual central locking and folds down with side wall spring lifter * Tailgate swings with automatic cam lock and 150 mm rear chute * Manual Dosing system via chain * 5 mm deck made of STEELECT steel (HBW 450 steel) * Roll-up tarpaulin (RAL 9006) with side crank * Access ladder on the front left outside of the bulkhead * Vehicle body complies with EN 12642 XL * Chassis painted in RAL 7021 black-grey * Side walls painted in RAL 9006 white aluminum * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from 29/2025 * Sample images may vary

Condition: used, overall weight: 18,000 kg, maximum load weight: 13,160 kg, axle configuration: 2 axles, loading space volume: 10 m³, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 900 mm, first registration: 04/2025, Equipment: ABS, ? 9 t each (technical axle load) ? Drum brake, size 420 x 180 mm, with asbestos-free brake pads and enclosed brake drum ? Offset ET0 (S-hub) ? Welded box-type link ? Standard wheel studs ? Electronically controlled dual-circuit pneumatic brake system (EBS E+RSS) according to EC regulations with automatic load-sensing brake valve (ALB) spring-loaded cylinders and two interchangeable coupling heads ? ABS 2S/2M (Wabco), with connecting lines ? Electronically controlled air suspension (ECAS) with automatic rapid lowering during tipping to increase stability, can be deactivated for pavers Cgobswa Tvlsu E I Tast ? Tires 385/65 R 22.5 profile S ? Painted steel rims ? Tire pressure monitoring system (TPMS) according to EU regulation UN ECE-R 141 ? Half-shell fenders with splash guard mat ? Plastic fenders ? Rigid underrun protection according to ECE R-58 (R58-03) ? Floor: 5 mm HBW 450 (Hardox 450 or equivalent) ? Bulkhead: 3 mm BS 70 ? Left sidewall: 4 mm HBW 400 (Hardox 400 or equivalent), M-JET ? Right sidewall: 4 mm HBW 400 (Hardox 400 or equivalent), M-JET ? Rear wall: 4 mm HBW 400 (Hardox 400 or equivalent), M-JET ? Swinging and foldable left sidewall with spring relief ? Swinging right sidewall ? Spring relief on the left sidewall ? Swinging rear wall ? Rear wall with cam lock ? Fixed rear corner pillars ? Fixed left front corner pillar ? 150 mm long, fixed, straight discharge chute ? Safety support for the tipping body ? Dosing device with chains ? Access ladder on the left side of the bulkhead ? Without tow coupling ? Two interchangeable coupling heads with integrated line filters ? Aluminum air reservoir ? 7-pin ABS connection cable for EBS braking system ? 1 x 15-pin front adapter according to ISO 12098 Note: The towing vehicle must be equipped with a 15-pin socket according to ISO/DIS 12098 ? 1 x 15-pin electrical connection cable (Wendelflex) ? Hydraulic oil filled with HLPD-22 mineral oil Note: Not in conjunction with kit shipping ? Chassis frame painted (base frame, axle supports, and underrun protection - excluding attachments) in standard colors (all colors except metallic and special colors) ? Chassis frame color: black-gray RAL 7021 ? Tipper body paint finish: standard color ? Tipper body color: pure white RAL 9010 ? Individual approval (e.g., TÜV or DEKRA) or COC ? Contour markings according to EC: white on the sides, yellow at the rear ? Manufacturer's confirmation ? COC Note: The COC is not yet available for all MEILLER products ? 1-year warranty period, excluding annual inspections (UVV tests) ? 24-volt five-chamber lights with integrated, triangular reflectors according to ECE-R 48, including lamp guards ? MEILLER standard axles (SAF or BPW) ? Floor-level, foldable lashing eyes (2 t) and plug-in lashing eyes (8 t) in the corners of the tipper body floor Note: For retrofitted access steps, the specifications of Appendix 2 of DGUV Regulation 70 # Vehicles must be observed ? PREVANTEC S package consisting of a swinging and foldable left side panel and floor-level, foldable lashing eyes (2 t) as well as plug-in lashing eyes (8 t) in the corners of the tipper body floor in accordance with DIN EN 12640. Note: For retrofitted access points, the specifications of Appendix 2 of DGUV Regulation 70 # Vehicles must be observed. - Tipper body width 2,380 mm All information without guarantee / Subject to prior sale.

Condition: new, overall weight: 18,000 kg, maximum load weight: 13,160 kg, axle configuration: 2 axles, loading space volume: 10 m³, loading space length: 4,900 mm, loading space width: 2,380 mm, loading space height: 900 mm, Year of construction: 2023, * Wabco EBS-E / ABS (electronic braking system with RSS) * Emergency release device for spring-loaded cylinders * Drum brakes 420 x 180 mm with asbestos-free brake pads and closed brake drums * 2 x 9 ton SAF axles * Air suspension * Automatic rapid lowering during tipping to increase stability (can be switched off for pavers) * Aluminum air tank * Welded box steering rod Cgjbu E Isv Iid Nj Tajt * Y-drawbar with 50 mm flange towing eyelet that can be adjusted in height via the head plate * Jost support winch at the front * Underrun protection at the rear * 15-pin power plug * 5-chamber tail lights with protective roof * Closed. Plastic single fender * Steel 3-way tipping body with M-Jet side walls * Front wall made of 3 mm BS 70 steel * Side walls with stable, all-round inward-sloping top belt * Side walls and tailgate made of 4 mm HBW 400 steel * Continuous side walls -without center stanchion- * Right side wall swinging via manual central locking -preparation for long levers and hinges for folding side wall- * Bordmatic -hydraulic folding side wall on the left with 1 Bordmatic cylinder * Tailgate swinging with automatic cam lock and 150 mm rear chute * Manual dosing device using a chain * 5 mm bridge floor made of HBW 450 steel * Access ladder on the front left outside on the front wall * Vehicle body complies with EN 12642 XL * Chassis painted in DB 7350 nova gray * Vehicle is from production in 2023 and does not yet have a tire pressure monitoring system. We have an exemption permit from the KBA, Flensburg -- * New vehicle from stock * Subject to errors and prior sale * Immediately available from Egestorf on the A7

Condition: used, axle configuration: 2 axles, loading space length: 7,800 mm, loading space width: 2,300 mm, loading space height: 1,550 mm, first registration: 03/2013, suspension: air, color: grey, tire size: 425/65 R22.5, Year of construction: 2013, = Additional options and accessories = - Isolated - Capacity of the superstructure: 27 m3 (The total capacity of the superstructure.) - Material: steel = More information = Tyre size: 425/65 R22.5 Make axles: BPW Eco plus Brakes: drum brakes Suspension: air suspension Axle 1: Tyre profile left: 10%; Tyre profile right: 70% Axle 2: Tyre profile left: 10%; Tyre profile right: 20% GVW: 35.000 kg Cgjbowf Emmju E I Tast Dimensions (LxW): 925 x 250 cm Tipper: Back = Dealer information = Would you like more information about this vehicle? We recommend that you take a look on BAS World. There you will find: • HD inspection video • 360-degree images • Complete and verified specifications • Calculation of delivery costs and time • BAS World support and services Want to know more? Visit BAS World online! España (ES) Hablamos 17 idiomas, para que siempre podamos ayudarte en tu propio idioma. No dudes en ponerte en contacto con nosotros directamente. ¡Nuestro empleado español estará encantado de ayudarte! Deutschland (DE) Wir sprechen 17 Sprachen, damit wir dir immer in deiner eigenen Sprache helfen können. Kontaktiere uns gerne direkt. Unser deutscher Mitarbeiter hilft dir gerne! France (FR) Nous parlons 17 langues, afin de pouvoir toujours vous aider dans votre propre langue. N'hésitez pas à nous contacter directement. Notre collaborateur français se fera un plaisir de vous aider ! Portugal (PT) Falamos 17 idiomas, para que possamos sempre ajudá-lo no seu próprio idioma. Não hesite em nos contactar diretamente. O nosso colaborador português terá todo o prazer em ajudá-lo! Italia (IT) Parliamo 17 lingue, per poterti sempre aiutare nella tua lingua. Non esitare a contattarci direttamente. Il nostro collaboratore italiano sarà felice di aiutarti!

Condition: used, overall weight: 18,000 kg, empty load weight: 3,300 kg, maximum load weight: 14,700 kg, axle configuration: 2 axles, loading space length: 7,000 mm, first registration: 06/2013, next inspection (TÜV): 02/2026, suspension: air/air, tire size: 385 / 55 R 22,5, Year of construction: 2013, total length: 25,100 mm, total width: 13,500 mm, total height: 94,000 mm, front tire size: 385 / 55 R 22,5, emission class: none, Equipment: ABS, ABS, axle manufacturer BPW with disc brakes, suspension air / air, 2 x pneumatic container locking, 4 x LED work lights, Duomatik air connection Cebev Anqdsu E I Tajgt

Condition: used, maximum load weight: 18,000 kg, first registration: 01/2016, tire size: 385/65/22,5, Year of construction: 2015, Viewing by appointment only Suspension: - 1st axle: air-sprung - 2nd axle: air suspension Brake : - 1st axle: drum - 2nd axle: drum Spring brake Lift axle: - 1st axle: yes - 2nd axle: no Tires: - 1st axle: single wheel - 2nd axle: single wheel - Tire size: 385/65/22.5 - Tread depth in %: 90 - Rim type: Steel Further equipment - Unladen weight: 3960 kg - Payload: 14040 kg - Loading area: 11.67 m² - Loading volume: 18.09 m³ - Pneumatic flap opening - ABS - EBS - Number of axles 2 - Axle manufacturer: BPW Interior load compartment dimensions approx: - Length: 4,821mm Cjbu E Ijv Nz E Ij Taegt - Width: 2,421mm - Height: 1,550mm - Material: aluminum Subject to prior sale, errors and typing errors excepted

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 07/2017, * BPW axles * Disc brakes Cobuswguwqs E I Tajgt * Lift axle * Tarpaulin * Unladen weight: 6,940 kg -----Internal vehicle number: 10402----Subject to errors and prior sale.

Condition: used, axle configuration: 3 axles, Year of construction: 2014, Equipment: ABS, = Additional options and accessories = Cgjbuowhf Rdj E I Taot - Lifting axle

Condition: new, overall weight: 35,000 kg, maximum load weight: 28,900 kg, axle configuration: 3 axles, loading space length: 7,600 mm, loading space width: 2,300 mm, loading space height: 1,500 mm, loading space volume: 25 m³, Year of construction: 2025, Equipment: ABS, * Wabco EBS-E / ABS (electronic braking system with RSS) * Emergency release system for spring-loaded cylinders * 22.5" disc brakes * Paver brake with shortened rear fenders and manual paver switch * 3 x 9-ton SAF axles * Air suspension with automatic lowering during tipping (to increase stability, can be switched off for pavers) * Lift axle with traction assist Cobu E I Tor Exzmjasgt * Aluminum air reservoir * Tire pressure monitoring system (TPMS) * Jost telescopic steel drop legs with disc base (can only be uncoupled when empty) * 4-meter aluminum ladder stored on the right side above the fenders * Closed plastic single fenders * Foldable underride protection, rear towing eye * 1 x 15-pin trailer socket * 5-chamber tail lights with protective roof * 1 x additional LED work light * Flashing side marker lights * Chassis made of high-strength fine-grain steel with Meiller-specific torsion cross members * Half-shell steel rear tipping trough (front hydraulic ram with medium working pressure) * Bulkhead with 600 mm front roof as tarpaulin support * Side walls with sturdy, all-round, inward-sloping top chord * Inclined bulkhead and rear wall * Bulkhead made of 4 mm BS 70 steel * Tailgate made of 4 mm HBW 400 steel * Side walls made of 4 mm HBW 450 steel * Tailored floor made of 5/6 mm Hardox 450 steel * Surface-mounted tailgate with rubber seal and 2 additional toggle locks as well as an automatic 2-hook lock * Folding access ladder on the front left side * Document box on the bulkhead * Electric Sliding tarpaulin (RAL 9006 white aluminum) with switch on the chassis and radio remote control. * Loading volume approx. 25 m³ * Fifth wheel height unloaded approx. 1,247 mm and loaded approx. 1,217 mm * --GVW of 39,000 kg technically possible-- * Chassis painted in RAL 7021 black-gray * Subject to errors and prior sale * New vehicle with manufacturer's warranty * Available immediately from Egestorf

Condition: used, mileage: 1,001 km, gearing type: other, color: blue, first registration: 01/1992, Year of construction: 1992, loading space length: 5,000 mm, loading space width: 2,360 mm, loading space height: 500 mm, driver cabin: other, Vehicle location: Bovenden, steel body, lashing eyes, swing tailgates Body: Meiller 3-way tipping body with winch. Body comes from a Daimler Benz SK 1417 AK 4x4, ex-THW, approx. 56,000km, wheelbase 3,600mm suitable for 817 - 1417 With winch, NO CABLE in the subframe! Dimensions: 5,000mm x 2,360mm x 500mm. ACCESSORIES INFORMATION IS SUBJECT TO GUARANTEE. Subject to change, prior sale, and errors! Cgebusv Sdins E I Taet - .

Condition: used, overall weight: 18,000 kg, empty load weight: 3,300 kg, maximum load weight: 14,700 kg, axle configuration: 2 axles, loading space length: 7,000 mm, first registration: 06/2013, next inspection (TÜV): 04/2025, suspension: air/air, tire size: 385 / 55 R 22,5, Year of construction: 2013, total length: 25,100 mm, total width: 13,500 mm, total height: 94,000 mm, front tire size: 385 / 55 R 22,5, emission class: none, Equipment: ABS, ABS, axle manufacturer BPW with disc brakes, suspension air / air, brake drum brake, side impact protection fixed, 2 x pneumatic container locking, 2 x reversing lights LED, Duomatic air connection Cebu E Ijv Sd Dle Tasgt

Condition: used, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 06/2022, Year of construction: 2021, Equipment: ABS, GERMAN Visit our website, where you'll find our complete vehicle inventory with many more photos and information in several languages. SEL 7822 Meiller KISA 3 Lift axle German registration Registration date: June 9, 2022 Year of manufacture: October 21, 2021 . (kg): 39,000 . (kg): 35,000 Curb weight (kg): 6,980 VIN: W09SHL339MSM08795 MOT: 09.2025 TIRES AND AXLES: Tires: 385/65 R 22.5 Axle configuration: 3 BPW axles 1st lift axle Air suspension Drum brakes TIPPER: Tipper cover VEHICLE DOCUMENTS: License plate License plate COC M. BUFANO m. (Italian, English, German) J. CORDEIRO j. (Portuguese, Spanish, Italian, English) D. ASMER d. (German, Russian/??-?????) L. OBODYNSKA Ukrainian/?????, Russian/??-?????) We speak: GERMAN, ENGLISH, ITALIAN, SPANISH, PORTUGUESE, UKRAINIAN, RUSSIAN, POLSKI Although every effort has been made to ensure the accuracy of the information, we cannot accept liability for errors or omissions. We ask our customers to consult the available photos. The dimensions given are approximate. Our vehicles are sold in the "as is" condition. We invite customers to visit our company to personally inspect the vehicle's condition. We also offer the option of a test drive. It is important to note that the batteries supplied with the vehicle are the ones currently installed. If the customer would like new batteries, we are available to provide pricing information. ---- ENGLISH Visit our website, where you will find our complete stock with many more photographs and information in several languages. SEL 7822 Meiller KISA 3 Liftable axle German registration 1st registration: June 9th, 2022 Construction year: October 21, 2021 Technical total gross weight (kg): 39,000 Permitted total weight (kg): 35,000 Empty weight (kg): 6,980 VIN: W09SHL339MSM08795 HU: 09.2025 TIRES AND AXLES: Tires: 385/65 R 22.5 Axle configuration: 3 Axles BPW 1st Axle: Liftable Air suspension Drum brakes TIPPER: Tipper covers VEHICLE DOCUMENTS: Cebu Ejwf Tr Dj I Taegt Appearance letter COC M. BUFANO m. (Italian, English, German) J. CORDEIRO j. (Português, Español, Italiano, English) D. ASMER d. (German, Russian/??-?????) L. OBODYNSKA Ukrainian/?????, Russian/??-?????) We speak: GERMAN, ENGLISH, ITALIAN, SPANISH, PORTUGUESE, UKRAINIAN, RUSSIAN, POLSKI Although every effort has been made to ensure the accuracy of the information, we are not responsible for any errors or omissions. We kindly ask our customers to consult the photos available. The measures given are approximate values. Our vehicles are sold in the condition they are in. We invite customers to visit our company to personally inspect the vehicle?s condition. Additionally, we offer the opportunity for a test drive. It?s important to note that the batteries are delivered with the vehicle

Condition: good (used), axle configuration: 3 axles, first registration: 01/2011, suspension: air, color: other, tire size: 385/65 R22,5, Year of construction: 2011, = Additional options and accessories = - 3 axles - Air suspension - Lift Axle = Remarks = Structure Material: Staal = More information = Technical information Chassis: STEEL CHASSIS GVW: 39.000 kg Axle configuration Tyre size: 385/65 R22,5 Tyre profile: 75% Brakes: drum brakes Suspension: air suspension Rear axle 1: Lift axle; Max. axle load: 9000 kg Cjbuowfp D Nj E I Taogt Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Functional Make of bodywork: STEEL CHASSIS / STEEL TIPPER - INSULATED / ISOLEE Condition Technical condition: good Visual appearance: good Damages: none Identification Registration number: 1QAF200

Condition: new, overall weight: 39,000 kg, maximum load weight: 32,840 kg, axle configuration: 3 axles, loading space length: 9,600 mm, loading space width: 2,550 mm, loading space height: 2,000 mm, loading space volume: 49 m³, Year of construction: 2024, Equipment: ABS, ? Continuous floor plate made of a wear-resistant aluminum alloy ? Continuous trough supports made of an abrasion-resistant, shock-absorbing rubber compound ? Nominal length: 9,600 mm i.l. ? Electric air suspension system with switchable automatic lowering device (ASE) during tipping ? Fifth wheel height when unloaded: 1,200 mm ? Side wall height: 2,000 mm ? Volume: 49 m³ ? Side walls made of hollow aluminum profile (2 mm outside, 2.5 mm inside) ? Reinforced tipping area at the rear (2.3 mm outside, 3.9 mm inside) ? Pendulum frame with a centrally divided door with automatic locking ? Floor 5 mm and the rear third 7 mm aluminum, tailored bland ? Pallet width (2,440 mm) ? 3 x 9 ton technical axle load ? Disc brake ? Axle lift on the first axle ? ABS (Anti-Theft Device) ? Roll-over tarpaulin ? Meiller quick-release system ? Tarpaulin color: RAL 9006 white aluminum ? Argus hydraulic coupling, type: HDK DN 20 ? 2 x 80 l aluminum air reservoirs ? Tire pressure monitoring system (TPMS) ? Operator's station for roll-over tarpaulin Csbewfvtdeu E I Taogt ? 4.00 m long aluminum ladder ? Extendable ladder in the rear center ? Chassis frame color: black-gray RAL 7021 ? Tipper body color: white aluminum RAL 9006 All information is subject to change without notice / subject to prior sale.

Condition: new, overall weight: 35,000 kg, maximum load weight: 28,420 kg, axle configuration: 3 axles, loading space length: 7,600 mm, loading space width: 2,300 mm, loading space height: 1,500 mm, loading space volume: 25 m³, Year of construction: 2024, Equipment: ABS, * Wabco EBS-E / ABS (electric brake system with RSS) * Emergency release device for spring brake cylinders * Disc brakes 22.5 * Aluminum air reservoir * Prefabricated brake with shortened rear mudguards and man. Finisher switch * 3 x 9 to. BPW Eco axles * Air suspension with lifting and lowering system and automatic lowering during the tipping process (to increase stability) * can be switched off for overhead pavers) * 1st axle liftable with starting aid * Smart Board: lifting + lowering and lowering of the lift axle, axle load display, KM counter, * KM counter Readout of the fault memory * Tire pressure monitoring system ( TPMS) * Meiller-specific torsion cross member * Starting aid * BPW telescopic stabilizers with telescopic foot * 4 m aluminum ladder stored on the right side of the frame * Closed plastic single mudguards * Folding underride guard * Folding A-plate * Rear towing eye * 1 x 15-pin trailer socket * LED tail lights with canopy * Chassis made of high-strength fine-grained steel * Half-shell steel rear tipper body made of Hardox HBW-450 steel * Front medium-pressure hydraulic ram * Side walls with sturdy all-round inward sloping top chord * Front & rear wall inclined * 3 mm front wall made of BS50 steel on the outside and 3 mm BS70 steel on the inside * 4 mm side walls made of HBW 450 steel * 4 mm rear wall made of HBW 450 steel * Tailo-red floor 5 / 6 mm * Surface-mounted tailgate with double joint and automatic 2-hook locking system * Bolted access ladder with folding lower section at front left * Document pocket on the bulkhead * Electric sliding tarpaulin -RAL 9006 white aluminum- with radio remote control or mechanical switch operation on the right side * 600 mm tarpaulin support at the front of the bulkhead * Thermal insulation to DIN 70001 and preparation for measuring technology - holder without sensors * Loading volume approx. 25 m³ * Semi-mounted height unloaded 1,247 mm and loaded 1,217 mm * Chassis paint finish in RAL 7350 nova gray * New vehicle with manufacturer's warranty * Permissible total weight of 39,000 kg technically possible * Sample pictures Cgobusr Exzuj E I Tajt * Subject to errors and prior sale * available immediately from Egestorf