Used Fliegl Roll-Off Trailers for sale (348)

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT21801012090, empty load weight: 2,800 kg, maximum load weight: 15,200 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,300 mm, total width: 2,550 mm, total height: 1,300 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, color: silver, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ### Chassis – Turntable Drawbar Trailer for Roll-Off Containers * High-tensile steel welded chassis construction * Sliding frame system: * The container is loaded from the rear onto the sliding frame and pushed forward * Front container stop adjustable for 6.0 m, 6.5 m and 7.0 m roll-off containers with external rollers * Container locking system: * 2 pairs of recessed locking hooks integrated into the floor * Pneumatic operation * Internal 2-point locking system * Not suitable for roll-off containers with internal centre beam * Designed for the transport of roll-off containers with subframe according to DIN 30722 * Heavy-duty turntable with ball-bearing slewing ring * 2 wheel chocks with holders * Aluminium side underrun protection * Steel rear underrun protection Bdodpezggicefx Agmjh * Semi-circular mudguards * Rear impact protection, mounted vertically on left and right side, with delta rubber buffers on underrun protection brackets * Spare wheel carrier for 1 spare wheel, including wheel mounting kit * Plastic toolbox with drawer and shelf insert, dimensions: 650 x 520 x 670 mm (W x H x D), lockable with padlock ### Drawbar * Drawbar with certified 40 mm towing eye ### Axles & Suspension * SAF disc brake axles * Laser wheel alignment of axles and suspension for reduced tyre wear and lower fuel consumption * Air suspension with raise-and-lower valve ### Wheels & Tyres * 385/55 R 22.5 tyres * Manufacturer's choice * Steel rims, factory silver finish ### Braking System * Dual-line compressed air braking system * Spring-loaded parking brake * Drive-away protection: opening the container locking system automatically activates the spring-loaded parking brake * Vehicle Stability Control System * Two non-interchangeable coupling heads at the front with connecting lines to the towing vehicle * EBS (Electronic Braking System) with front EBS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure proper ABS functionality. ### Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights * 2 white front position lights * 2 white/red rear outline marker lights * 2 additional LED work lights at the rear, activated via reverse gear * 2 x 7-pin non-interchangeable front plugs with connecting cable ### Registration & Compliance * Registration country: Germany * DEKRA inspection and certification included (according to §13 EC-FGV) * 24/7 service hotline * Prepared for single-line licence plate holder * Reflective contour markings according to ECE R048 (white on the sides, red at the rear) ### Paint Finish * Chassis: hot-dip galvanised or painted according to customer requirements * Drawbar: black KTL coating (cathodic dip coating) --- Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,100 kg, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, total length: 9,325 mm, total width: 2,550 mm, total height: 1,000 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ### Chassis – 3-Axle Turntable Combination Trailer for Roll-Off Containers & Machinery Transport * High-tensile steel welded chassis construction * Container locking system: * 2 pairs of recessed locking hooks integrated into the floor * Pneumatic operation * Internal 2-point locking system * Not suitable for roll-off containers with internal centre beam * Adjustable and removable longitudinal guide rails, approx. 115 mm high * Heavy-duty turntable with ball-bearing slewing ring * Recessed mushroom lashing points on the top and sides of the outer frame, each rated at 5 tonnes * Integrated stake pockets in the outer frame (internal dimensions: 70 × 40 mm), convertible to 5-tonne lashing rings * Wheel chocks with holders * Aluminium side underrun protection * Steel rear underrun protection * Quarter mudguards * Spare wheel carrier including mounting kit * Spare wheel matching the standard tyres, mounted on a steel rim * Lockable plastic toolbox with drawer and shelf insert, dimensions: 650 × 520 × 670 mm (W × H × D) ### Drawbar * Drawbar with certified 40 mm towing eye ### Axles & Suspension * Drum brake axles * Laser wheel alignment of axles and suspension for reduced tyre wear and lower fuel consumption * Air suspension with raise-and-lower valve ### Wheels & Tyres * 235/75 R 17.5 tyres * Twin steel wheels, factory silver finish ### Braking System * Dual-line compressed air braking system * Spring-loaded parking brake * Electronic Vehicle Stability Control System * Duomatic air coupling at the front with connecting line to the towing vehicle * EBS (Electronic Braking System) with front EBS connector and connecting cable ### Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights * 2 white front position lights * 2 white/red rear outline marker lights * 1 × 15-pin front connector with connecting cable ### Loading Platform * Steel floor * Recessed front roller channel for roll-off containers * Suitable for roll-off containers from 5,000 mm to 7,000 mm in length ### Loading Ramps * Lockable storage compartment for loading ramps beneath the loading platform * Reinforced access hatch suitable for driving over * 1 pair of aluminium loading ramps, approx. 3,000 mm long and 450 mm wide * Load capacity: 14,000 kg per pair ### Registration & Compliance * Registration country: Germany * DEKRA inspection and certification included (according to §13 EC-FGV) Bodpjzhf Aksfx Agmodh * 24/7 service hotline * Prepared for single-line licence plate holder * Reflective contour markings according to ECE R048 (white on the sides, red at the rear) ### Surface Protection & Paint Finish * Chassis: hot-dip galvanised or painted according to customer requirements * Drawbar: black KTL coating (cathodic dip coating) --- Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications.

Condition: new, functionality: fully functional, machine/vehicle number: WFDFLT22001014750, empty load weight: 3,560 kg, maximum load weight: 16,440 kg, overall weight: 20,000 kg, axle configuration: 2 axles, total length: 9,770 mm, total width: 2,550 mm, suspension: air, tire size: 265/70 R19,5", tire condition: 100 %, color: grey-black, Year of construction: 2026, - Roll-off container trailer - Attention: archive images! #Turntable chassis, waste management version - Fine-grain steel welded construction - 2 longitudinal members with cross members, top of longitudinal members designed as wear-resistant container roller track, loadable from the rear, with lead-in ramp. For roll-off containers with external rollers of 5.5/ 6.0/ 6.5/ 7.0 m (for transporting roll-off containers to DIN 30722), plug-in stops: 1 x front, 1 x 250 mm before the first stop, 1 x 750 mm, 1 x 1150 mm, 1 x 1400 mm, each measured to the stop of the roller/container, front lowering at least 1500 mm long - Container locking: - 2 pairs of locking hooks recessed in the floor - pneumatic actuation - hold-down locking with a clamping force of 4 t per claw - Turntable with heavy-duty ball-bearing slewing ring - Wheel chocks with holder - Aluminium side underrun protection, folding up on the right in direction of travel Bdjdsz Eanmjpfx Agmsh - Rear underrun protection, galvanised steel - Fliegl mud flap at rear across full width - Half-shell mudguards - Anti-spray mud flaps on last axle only - 1 document box, at front on the turntable bogie - 1 aluminium storage box with stainless steel lid, w=600/h=400/d=500 mm, lockable, on the right in direction of travel #Towing equipment, turntable trailer - Drawbar with certified 40 mm drawbar eye - Drawbar mechanically length-adjustable by 6 x 100 mm and lockable - Parking sockets for electrics/ABS and air connections on drawbar - Drawbar height adjustment via spring #Axles + suspension - BPW disc brake axles with 370 mm disc diameter - Front container stop at very front to centre of 1st axle approx. 1250 mm - Axle spacing approx. 4840 mm, centre of last axle to end approx. 910 mm - "Laser-aligned axles/running gear": reduced tyre wear and fuel consumption - Air suspension with raise & lower valve, + auto-reset function, front and rear separately operable - Controls at front left in direction of travel, at drawbar #Wheels and tyres - 8x 265/70 R 19.5" - at manufacturer's choice - 8x steel rims in twin configuration, factory silver - Wabco tyre pressure monitoring system, display in towing vehicle via EBS, to ECE R 141 #Braking system - 2-line compressed-air braking system - Double release button on bracket, approx. centre of trailer, left in direction of travel - Spring-brake parking brake - Immobiliser - Vehicle stability system - Duomatic connection at front - 24 V EBS, electronic braking system with EBS connector at front - Make: Wabco - Wabco SmartBoard, mileage and diagnostic/system messages #Electrics - 12 to 24 V, LED multi-chamber lamps Aspöck Eco LED II, flashing side marker lamps, LED number plate lighting - 2 white LED front position lamps - 2 white/red LED outline marker lights at rear - 1 x 15-pin socket at front, all 15 pins fully wired through to the rear - LED work lights on the side, front left and front right in direction of travel on side underrun protection, switched via switch in the truck cab - 2 additional LED work lights at rear #Paintwork - Frame DB 7350 Novagrau - "10-year warranty against rust-through" - Attention: archive images!

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 2,800 kg, maximum load weight: 15,200 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,300 mm, total width: 2,550 mm, total height: 1,300 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ### Chassis – Turntable Drawbar Trailer for Roll-Off Containers * High-tensile steel welded chassis construction * Sliding frame system: * The container is loaded from the rear onto the sliding frame and pushed forward * Front container stop adjustable for 6.0 m, 6.5 m and 7.0 m roll-off containers with external rollers * Container locking system: * 2 pairs of recessed locking hooks integrated into the floor * Pneumatic operation * Internal 2-point locking system * Not suitable for roll-off containers with internal centre beam * Designed for the transport of roll-off containers with subframe according to DIN 30722 * Heavy-duty turntable with ball-bearing slewing ring * 2 wheel chocks with holders * Aluminium side underrun protection * Steel rear underrun protection * Semi-circular mudguards * Rear impact protection, mounted vertically on left and right side, with delta rubber buffers on underrun protection brackets * Spare wheel carrier for 1 spare wheel, including wheel mounting kit * Plastic toolbox with drawer and shelf insert, dimensions: 650 x 520 x 670 mm (W x H x D), lockable with padlock ### Drawbar * Drawbar with certified 40 mm towing eye ### Axles & Suspension * SAF disc brake axles * Laser wheel alignment of axles and suspension for reduced tyre wear and lower fuel consumption * Air suspension with raise-and-lower valve ### Wheels & Tyres * 385/55 R 22.5 tyres * Manufacturer's choice * Steel rims, factory silver finish ### Braking System * Dual-line compressed air braking system * Spring-loaded parking brake * Drive-away protection: opening the container locking system automatically activates the spring-loaded parking brake * Vehicle Stability Control System * Two non-interchangeable coupling heads at the front with connecting lines to the towing vehicle * EBS (Electronic Braking System) with front EBS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure proper ABS functionality. ### Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights * 2 white front position lights * 2 white/red rear outline marker lights * 2 additional LED work lights at the rear, activated via reverse gear * 2 x 7-pin non-interchangeable front plugs with connecting cable ### Registration & Compliance * Registration country: Germany * DEKRA inspection and certification included (according to §13 EC-FGV) * 24/7 service hotline * Prepared for single-line licence plate holder Bsdpfx Aozggghjgmjdh * Reflective contour markings according to ECE R048 (white on the sides, red at the rear) ### Paint Finish * Chassis: hot-dip galvanised or painted according to customer requirements * Drawbar: black KTL coating (cathodic dip coating) Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,200 kg, maximum load weight: 14,800 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total length: 9,770 mm, total width: 2,550 mm, total height: 1,300 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ### Chassis – Turntable Drawbar Roll-Off Container Trailer * High-tensile steel welded chassis construction * Two longitudinal beams with cross members * Top surface of the longitudinal beams designed as wear-resistant container roller tracks * Rear loading with integrated loading ramp * Suitable for roll-off containers with lengths of 6.5 m and 7.0 m * Container locking system: * 2 pairs of recessed locking hooks integrated into the chassis * Pneumatic operation * Internal 2-point locking system * Not suitable for roll-off containers with internal centre beam * Designed for transporting roll-off containers with subframe according to DIN 30722 * Heavy-duty turntable with ball-bearing slewing ring * 2 wheel chocks with holders * Aluminium side underrun protection * Steel rear underrun protection * Semi-circular mudguards * Spare wheel carrier for 1 spare wheel, including wheel mounting kit * Plastic toolbox with drawer and shelf insert, dimensions: 650 x 520 x 670 mm (W x H x D), lockable with padlock ### Drawbar * Drawbar with certified 40 mm towing eye ### Axles & Suspension * SAF disc brake axles with 430 mm brake disc diameter * Laser wheel alignment of axles and suspension for reduced tyre wear and lower fuel consumption * Air suspension * Raise-and-lower valve ### Wheels & Tyres * 385/55 R 22.5 tyres Bdsdpoi Ri Nmjfx Agmjh * Manufacturer's choice * Steel rims, factory silver finish ### Braking System * Dual-line compressed air braking system * Spring-loaded parking brake * Drive-away protection: * Opening the container locking system automatically activates the spring-loaded parking brake * Electronic Stability Program (Vehicle Stability Control System) * Duomatic air coupling * EBS (Electronic Braking System) with front EBS connector and connecting cable Note: The trailer may only be operated with towing vehicles that ensure proper ABS functionality. ### Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights * 2 white LED front position lights * 2 white/red rear outline marker lights * 1 x 15-pin front connector * 2 additional LED work lights at the rear, activated automatically when reverse gear is engaged ### Registration & Compliance * Registration country: Germany * DEKRA inspection and certification included (according to §13 EC-FGV) * 24/7 service hotline * Prepared for single-line licence plate holder * Reflective contour markings according to ECE R048 (white on the sides, red at the rear) ### Surface Protection & Paint Finish * Chassis: hot-dip galvanised including passivation treatment * 15-year warranty against perforation corrosion * Drawbar: black KTL coating (cathodic dip coating) --- Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications.

Condition: used, maximum load weight: 16,000 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 12/2018, loading space length: 7,000 mm, loading space width: 2,550 mm, loading space height: 1,000 mm, total width: 2,550 mm, total height: 1,100 mm, Year of construction: 2018, Equipment: ABS, tail-lift, FLIEGL ZPS200K combo trailer for hooklift containers with external rollers, 5,500 mm – 7,000 mm, 2x 10m³ skip containers and construction machinery transport. German trailer, first owner. The "ZPS200K Kombi low-loader" is particularly suitable for alternating transport of construction machinery, roll containers, and skip containers. Low-loader 2-axle design for 20t permissible gross weight. Low loading height of 1,030mm. Lowerable turntable/chassis drawbar for transporting 2 skip containers. Bedpfxjy Hd Rgs Agmedh

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,840 kg, maximum load weight: 16,160 kg, overall weight: 20,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, total length: 9,975 mm, total width: 2,550 mm, total height: 1,000 mm, suspension: air, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example configuration. Production and equipment are tailored to customer specifications. ### Chassis – Turntable Combination Trailer for Roll-Off Containers * Container locking system: * 2 pairs of recessed locking hooks integrated into the floor * Pneumatic operation * Low-tension locking system with a clamping force of 6 tonnes per locking claw * The original system – proven for more than 30 years * Adjustable and removable longitudinal guide rails, approx. 115 mm high * Heavy-duty turntable with ball-bearing slewing ring * Recessed mushroom lashing points on the top and sides of the outer frame, each rated at 5 tonnes * Combination stake pockets with bolted lashing rings integrated into the outer frame, each rated at 5 tonnes (internal dimensions approx. 72 × 42 mm) * 2 wheel chocks with holders * Aluminium side underrun protection * Steel rear underrun protection * Four quarter mudguards * Lockable plastic toolbox (600 × 425 × 460 mm) * Open storage box for container safety net ### Drawbar * Drawbar with certified 40 mm towing eye * Pneumatically assisted height-adjustable Y-type drawbar (raise/lower function) ### Axles & Suspension * Drum brake axles * Laser wheel alignment of axles and suspension for reduced tyre wear and lower fuel consumption * External grease points for easier axle maintenance * Air suspension with raise-and-lower valve * Air suspension pressure gauge (air spring pressure indicator) ### Wheels & Tyres * 235/75 R 17.5 tyres * Manufacturer's choice * Twin steel wheels, factory silver finish Bjdpfxezhfz Tj Agmedh * TPMS (Tyre Pressure Monitoring System) according to ECE R141, displayed via the towing vehicle's EBS system (no additional truck installation required) ### Braking System * Dual-line compressed air braking system * Spring-loaded parking brake * Axle load detection via EBS CAN bus for display in the driver's cab * Electronic Vehicle Stability Control System * Duomatic air coupling at the front with connecting line to the towing vehicle * 24 V EBS (Electronic Braking System) with front EBS connector and connecting cable ### Electrical System * 24 V electrical system * LED multi-chamber rear lights * LED licence plate lighting * Yellow LED side marker lights * Flashing LED side marker lights linked to the turn indicators * 2 white LED front position lights * 2 white/red LED rear outline marker lights * 1 × 15-pin front connector with connecting cable * Parking holders for electrical, air and EBS connections on the drawbar * Additional rear LED work light activated via reverse gear * Removable LED rotating beacon with holder, activated via the parking lights * LED work lights on both sides, activated via reverse gear ### Loading Platform * Steel floor * Recessed front roller channel for roll-off containers * Suitable for roll-off containers from 5,000 mm to 7,000 mm in length ### Loading Ramps * Lockable storage compartment for loading ramps beneath the loading platform * 1 pair of aluminium loading ramps, approx. 3,000 mm long and 450 mm wide * Load capacity: 14,000 kg per pair ### Registration & Signage * Foldable "A" warning sign for waste transport * Rear parking board ### Surface Protection & Paint Finish * Chassis: hot-dip galvanised or painted according to customer requirements

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,000 kg, maximum load weight: 15,000 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 6,930 mm, loading space width: 2,450 mm, loading space height: 1,300 mm, total length: 9,300 mm, total width: 2,550 mm, total height: 1,300 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, color: original, Year of construction: 2026, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example only. Production and equipment are customized according to customer specifications. # Chassis – Turntable Container Trailer Heavy-duty fine-grain steel welded construction Sliding container system: Container is loaded from the rear onto the sliding frame and pushed forward. Adjustable front container stop for 6.0 m, 6.5 m and 7.0 m roll-off containers with external rollers. Container locking system: * 2 pairs of recessed locking hooks * Pneumatic operation Heavy-duty turntable with ball-bearing ring. 2 wheel chocks with holders Aluminium side underrun protection Steel rear underrun protection Half-shell mudguards Vertical rear impact protection (left and right) with Delta rubber buffers 1 spare wheel holder with mounting kit Lockable plastic toolbox with drawer and shelf (650 × 520 × 670 mm) # Drawbar Drawbar with certified 40 mm towing eye # Axles + Suspension SAF disc brake axles Laser-measured axle/chassis alignment for reduced tyre wear and fuel consumption Air suspension with raise/lower valve # Wheels and Tyres 385/55 R22.5 tyres on factory silver steel rims # Brake System Dual-line compressed air braking system Spring parking brake Drive-away protection: parking brake is automatically activated when the container locking system is open Vehicle Stability System (VSS) 2 non-interchangeable air couplings with connecting lines to the towing vehicle Electronic Braking System (EBS) with front connector and connecting cable Note: Trailer may only be operated with towing vehicles that ensure full ABS functionality. # Electrical System 24 V electrical system Multi-chamber lighting Yellow LED side marker lights 2 white front position lights 2 white/red rear outline marker lights 2 LED rear work lights, activated via reverse gear 2 × 7-pin front connectors with connecting cable Bdsdszna Tdopfx Agmjh # Registration Prepared for registration in Germany DEKRA approval and certificate according to §13 EC-FGV 24/7 service hotline Prepared for single-line number plate holder ECE R48 reflective contour markings (white sides, red rear) # Finish Frame hot-dip galvanized with passivation or painted in customer's preferred colour Drawbar KTL-coated in black

Condition: used, maximum load weight: 35 kg, overall weight: 35,000 kg, loading space volume: 101 m³, tire size: 385/55R22,5, Year of construction: 2025, front tire size: 385/55R22,5, rear tire size: 385/55R22,5, operation weight: 35,000 kg, Tires (front): 385/55R22.5, Tires (rear): 385/55R22.5_____Disc brakes, Air suspension, ABS, EBS3-axle sliding floor semi-trailer, type SDS 390/101 X-tra Long- Total weight permissible / technical: 35000/39000 kg- Payload permissible / technical approx.: 27148/31148 kg- Aggregate load permissible / technical: 24000/27000 kg- Fifth wheel load permissible / technical: 11000/12000 kg- Tare weight (basic version) approx.: 7852 kg +/- manufacturing tolerance- Overall length approx.: 15350mm- Overall width max.: 2550mm- Overall height approx.: 4005mm- Interior length approx.: 14905mm- Interior width approx.: 2470mm- Interior height front approx.: 2655mm- Interior height rear approx.: 2853mm- Volume approx.: 101 cbm- Fifth wheel height approx.: 1130mm- Kingpin installation dimension approx.: 1640mm- Front corner dimension approx.: 2040mmChassis / Fifth Wheel:- Fine-grained steel welded construction in lightweight design, up to the support legs- Fifth wheel plate with replaceable 2" kingpin- X-tra Long with approx. 14905 mm interior length- 24 ton, 2-speed support winch, single-sided operation, with straight lower part, without push-pull compensation- Extension ladder at the rear- Door lock on the side- 2 wheel chocks with holder- Aluminum side impact protection- Steel underrun protection with wide Fliegl mudguards- Folding mudflap for lighting unit- Quarter panel fenders- Rear impact protection- Aluminum ladder approx. 3550 mm, with holder on the side- Tarp pole with holder- 1 plastic toolbox, lockableAxles + Suspension:- BPW disc brake axles with 430 mm disc diameter- Air suspension- 1st axle automatic lift axle (circle driving with lifted 1st axle is not supported)Brake system:- 2-line pneumatic brake system- Color-coded line routing for easy servicing- 24 Volt EBS, electronic brake system with EBS socket at the front- with raise and lower valve- Vehicle - driving stability system- AAC Basic, automatic load relief axle acting on the last axle, as maneuvering aid, up to 20 km/h, can be switched off manually- Axle load detection via EBS-Canbus signal, for display on the display in the driver's cab, truck must be equipped accordinglyWheels and tires:- 385/55 R22.5- Steel rims, factory silverElectrical system:- 24 Volt, multi-chamber lights, yellow LED lighting on the sides- LED work lights on both sides- Additional LED work lights at the rearSB Hydraulics:- Hydraulic cylinder with sliding mechanism installed in the floor. 2-circuit hydraulics- Switching between forward/reverse operation is done electrically via radio remote control- Sliding floor power supply via parking lights- Recommended pump output:Flow rate: 110 ltr/minPressure: 250 barOil tank filling min: 100 ltrFloor:- Sliding floor with wear plate at the rear made of V2A sheet steel- Floor boards made of aluminum, 8 mm floor profile, ribbed design- End caps in aluminumBody:- Aluminum box body made of high-quality, abrasion-resistant material. Front and side walls made of aluminum hollow profiles, rounded at the top. Bsdpfezdgzzsx Agmsdh

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33902037031, empty load weight: 4,795 kg, maximum load weight: 30,320 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 09/2025, loading space length: 7,200 mm, loading space width: 2,470 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,040 mm, suspension: air, tire size: 385/65 R22.5", tire condition: 100 %, color: grey, These images are archive images! The vehicle may still be in use! Fine-grain steel welded construction, in basic lightweight design, kingpin plate with replaceable 2" kingpin, Curved front end "Patented" 24-ton, 2-speed landing gear, single-sided operation, with semi-circular lower part and straight connection plate, with stroke compensation Support wedges with holder Underrun protection, foldable Half-shell fenders Integrated "fender holder," surface resistant to stone chipping with anti-splash flaps only on the last axle Tarpaulin rod with holder Towing hook at the rear (not on Revolution model) Axles + Suspension SAF disc brake axles with 430 mm disc diameter "Axle/chassis laser-aligned" – reduces tire wear and fuel consumption Axles in off-road design Air suspension 1st axle: automatic lift axle, including forced lowering and starting assistance, activated by "3x braking" (starting assistance is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) "Hot-dip galvanized lift axle mechanism" Braking system 2-line compressed air braking system Color-coded line routing for easy maintenance Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line 24-volt EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system Automatic tilting lowering with shut-off valve "TPMS" tire pressure monitoring system - display on the tractor unit, via EBS, without truck installation (the truck must have the necessary prerequisites. Only on base tires). Wheels and tires 385/65 R22.5" Steel rims Electrical system 24 volts, multi-chamber lights in LED, yellow LED lighting on the sides, license plate lighting in LED (Note! with certain tractor units, false diagnoses may occur, although the function is given) Yellow LED lighting on the sides linked to the turn signal "flashing side lights" 2 white position lights at the front in LED 2 white/red outline lights at the rear in LED 2 x 7-pole and 1 x 15-pole fail-safe sockets at the front, without connecting cable Additional LED work light, integrated and recessed at the rear, switched via reversing light Hydraulics Low-pressure cylinder max. 170 bar Operation hydraulically via truck auxiliary drive Bins Aluminum box body made of high-quality, abrasion-resistant material. Sloping front wall, 5 mm thick, with external cylinder mount. Side walls made of 30 mm hollow chamber profiles, cleanly welded, with top rail profile that prevents spillage. Inside with access ladder on the front wall (not in conjunction with Cramaro). Bsdpfx Agey Rrplomedh Shovel and broom holder outside on the front wall. Greenline - conical and aerodynamic bin shape "Membrane" - rear wall Rear wall as a hinged flap with "double-hinge hinge," externally mounted with double hook lock. Rear wall with rubber seal Floor continuous, 6 mm thick Standing platform with access ladder, connecting plate for air/electrical and brake connections with large clearance for optimal operability. Roll tarp, can be folded to the right side, with central locking on the left side Operating instructions For transport of salt, lime, etc., we recommend a tipping cylinder with a hard-chrome plated piston rod, so that it is not attacked and rusted by the material.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,750 kg, maximum load weight: 30,250 kg, overall weight: 35,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,000 mm, suspension: air, tire size: 385/65 R 22.5, tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. More information Chassis, semi-trailer, tipper Fine-grained steel welded construction, in basic lightweight design, turntable with interchangeable 2 kingpin Curved front end, patented 24 tons, 2-speed landing gear, single-side operation, with straight lower part, without thrust compensation Underrun protection, foldable Half-shell mudguards Towing hook at the rear Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Axles in off-road design Air suspension 1st axle, automatic lift axle, including forced lowering and starting aid Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! With lifting and lowering valve Vehicle - driving stability system Wheels and tires 385/65 R22.5 Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display via the display in the towing vehicle, via EBS, without truck installation (this must be available in the truck. Only for basic tires). Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the side Yellow LED lighting on the side coupled with the turn signal "Flashing side lights" 2 white position lights at the front 2 white/red marker lights at the rear Bdsdoi Ri Nfspfx Agmsh 2 x 7-pole fail-safe sockets at the front, without connection cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chromed, with HDK screw connection, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck auxiliary drive Body Steel round body in Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with externally mounted hydraulic cylinder with ladder on the front wall. Greenline - conical and aerodynamic body shape Shovel and broom holder on the outside of the front wall. Membrane - rear wall Rear wall as a swing gate with double hinge, externally mounted with double hook locking. 2 clamping screws with lever locks on the side below. Side walls continuous, 4 mm thick, floor 4/5 mm thick, wear-resistant and weight-optimized construction Standing platform with ladder, connection plate for air/electricity and brake with large space for best possible operation. Roll cover on one side for stowing on the right, with central locking on the left Country of registration/signs Germany With Dekra approval and certificate (according to §13 EG - FGV) Superstructure strength according to EN 12642 24/7 service hotline Prepared for license plate holder, single row Contour marking with reflective tape according to ECE R 048, white on the side and red at the rear Paint finish Frame DB 7350 Novagrau 10-year warranty against rust-through Support feet, black coated Body RAL, single color Roll cover RAL, single color Available in thermally insulated design!

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33802030369, empty load weight: 31,110 kg, maximum load weight: 34,889 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 03/2022, next inspection (TÜV): 01/2027, total length: 7,390 mm, total width: 2,550 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, color: red, # Fliegl Chemical Tank Container Chassis Please note: The images shown are archive photos. The vehicle may still be in operation. ## Chassis * High-strength fine-grain steel welded chassis * Fifth wheel with replaceable 2" kingpin * Container configuration: * 1 × centrally positioned 20 ft ISO tank container * Alternatively suitable for 7.15 m / 7.45 m swap bodies * Front container locks in fixed (non-recessed) position * Extended container locking twist locks * 24-tonne, two-speed landing gear with single-side operation, straight foot design, without load compensation * Wheel chocks with holders * Side underrun protection * Aluminium rear underrun protection * EC-compliant anti-spray mud flaps * Stainless steel spill containment tray with: * 1¼" drain pipe * 1¼" shut-off valve * Drip tray included * Perforated anti-slip walkways (approx. 400 mm wide) on both sides between spill tray and chassis rails * Hose storage system approx. 4,500 mm long (including hose compartment) for: * 2 × DN 200 hoses (outer positions) * 2 × DN 160 hoses (centre position) * Rear stainless steel hose box: * Approx. 300 mm deep * Splash-proof * Stainless steel lid with full rubber seal * Drain opening at the lowest point * Stainless steel grounding lug at the rear right-hand side of the chassis * International grounding identification label * Rear access steps on the right-hand side leading to the underrun protection * Additional anti-slip step on the right-hand main chassis rail (approx. 260 × 300 mm) ## Axles & Suspension * SAF disc brake axles * Laser wheel alignment for reduced tyre wear and fuel consumption * Offset axle spacing: 1,410 / 1,310 mm * Suitable for combined transport up to a gross combination weight of 44 tonnes * Air suspension * First axle with automatic lift axle * Automatic lowering function and traction aid * Lift axle activated by pressing the brake pedal three times * Traction aid operational up to 30% axle overload and speeds of up to 25 km/h ## Braking System * Dual-line compressed air braking system * Colour-coded air lines for simplified servicing * Spring parking brake Bdsdpfoy Tvphsx Agmjh * Non-interchangeable air couplings at the front (without connecting hoses) * Electronic Braking System (EBS) * Front EBS socket without connecting cable * Lift and lowering valve * Vehicle Stability Control System * Axle load monitoring via EBS CAN bus for display in the truck dashboard (truck preparation required) Note: The trailer may only be operated with towing vehicles capable of ensuring the correct functioning of the ABS system. ## Wheels & Tyres * 385/65 R22.5 tyres * Manufacturer's choice * Steel wheels, factory silver finish ## Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights * Two white front position lights * Two red/white rear outline marker lights * 15-pin front connector (without connecting cable) # Approval & ADR Equipment * ECE R70 rear warning plate * ADR approval in accordance with ADR 9.1.1.2 * Approved for EX/II and EX/III vehicles * ADR vehicle approval certificate for the transport of certain dangerous goods (formerly B3) * Rear warning plate included * Not approved for UN 0331 and UN 0332 explosives (Class B-E) * Contour markings in accordance with ECE R048: * White reflective markings on the sides * Yellow reflective markings at the rear

Condition: used, maximum load weight: 30,200 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 03/2019, next inspection (TÜV): 06/2025, loading space length: 7,200 mm, loading space width: 2,420 mm, loading space height: 1,750 mm, loading space volume: 30 m³, total width: 2,550 mm, total height: 3,380 mm, Equipment: ABS, Fliegl DHKA 390 SDS01 30m³ Rear Tipper Aluminum Body Light 3-axle rear tipping semi-trailer with lightweight aluminum body, Type DHKA 390 – 30 m³ with attached rear tailgate, Greenline----### Aluminum Body Light / Aluminum Box Body ###---- Aluminum tipping body, Capacity: approx. 30 m³, Fifth wheel height: approx. 1,200 mm, Gross vehicle weight rating (GVWR): 35,000 kg, Unladen weight: 4,800 kg, Payload: 30,200 kg, 1st axle liftable, Roll tarp, foldable to the front-right side, with central locking to the front-left, 2x LED work lights at rear, SAF axles, Steel standing platform with anti-slip grate and safety railing, Hard-chromed tipping cylinder, Rear underrun protection, foldable, Bdsdpfowr Ry Eox Agmeh 1x drop-down support leg, Disc brakes, Broom and shovel holder mounted on front wall, Air suspension, Pendulum tailgate, mechanically locked (2-hook locking), Pendulum tailgate/rear wall sealed with rubber gasket, Side wall locking with screw fasteners, 1x grain slide, 1x side storage compartment on the left, 1x front storage compartment, Mudguards on all wheels, Loading platform dimensions (LxWxH): approx. 7,200 x 2,420 x 1,750 mm, Side wall height: approx. 1,750 mm, Loading height: approx. 3,239 mm, External dimensions (LxWxH): approx. 8,600 x 2,550 x 3,340 mm, Wheelbase: 3,100 x 1,310 x 1,320 mm, Tyres: 385/65R 22.5 on aluminum rims, Tread depth tyres left front: 14 mm, Tread depth tyres left center: 14 mm, Tread depth tyres left rear: 4 mm, Tread depth tyres right front: 12 mm, Tread depth tyres right center: 15 mm, Tread depth tyres right rear: 12 mm, Tipping floor worn Additional equipment: Overall length: approx. 8,600 mm, Overall width: approx. 2,550 mm, Overall height: approx. 3,340 mm, Internal body height: approx. 1,750 mm, Capacity: approx. 30 m³, Fifth wheel height: approx. 1,200 mm, Frame neck height: approx. 190 mm, King pin mounting dimension: approx. 600 mm, Central telescopic support, Uncoupling when loaded not possible; when uncoupled, the vehicle must be positioned sloping rearward, Rear underrun protection, foldable, Half-shell mudguards, Tarp pole with holder, Aluminium ladder approx. 3,550 mm with side holder, SAF disc brake axles, Air suspension, 1st axle automatic lift axle, additionally electrically operated from the truck, with start-off aid, truck installation not necessary (start-off aid functional up to axle overload of 30% and max. speed of 25 km/h), Spring-loaded parking brake, EBS, Electronic Braking System with EBS socket at front, without connection cable, Note: The trailer may only be towed by tractors that ensure the effectiveness of the ABS! 24 volt, 4x 3-chamber rear lights + 1 round reverse light + 1 round rear fog light, all LED, 2 white position lights at front, 1x 15-pin socket at front, without connection cable, Low-pressure cylinder max. 170 bar, with HDK screw coupling, fixed, NW 48 mm, Hard-chromed tipping cylinder, Bodies: Aluminum box body made from high-quality, wear-resistant material, Sloped front wall, 5 mm thick, With external cylinder mount, Side walls of 30 mm hollow chamber profiles, precisely welded, With bulk material deflecting upper rail profile, Greenline – conical, aerodynamic body shape, 'membrane' rear wall, Rear wall as pendulum tailgate, externally mounted with double hook locking, Rear wall with additional clamping bolts at the sides and bottom, Rear wall with rubber gasket, Note: Heat-resistant up to max. 170°C!, Central grain chute, Continuous floor 6 mm t

Condition: used, empty load weight: 5,933 kg, maximum load weight: 29,067 kg, overall weight: 35,000 kg, axle configuration: 3 axles, Condition - Very well-maintained vehicle from first owner Category - Semi-trailer Model - FLIEGL DHKA 350 - 35,000 kg Registration Month - 02 Registration Year - 2013 Gross weight (kg) – 35,000 Unladen weight (kg) – 5,933 Payload (kg) – 29,067 Colour - Silver Number of axles - 3 Maintenance - Inspection record Commercial/Export - Net price in € - 19,990 Subject to prior sale, changes, and errors Phone +49 551 50 84 912 According to manufacturer: Axles and Suspension SAF disc brake axles with 370 mm disc diameter; air suspension with raise/lower function; 1st axle is an automatic lift axle, includes forced lowering and starting aid, actuation by 'brake 3x' (starting aid is operational up to axle load exceedance of 30% and up to a maximum speed of 25 km/h) Chassis Special lightweight steel welded construction; fifth wheel plate with replaceable 2” kingpin Support legs Not equipped Tyres/Wheels 385 / 65 R 22.5”, manufacturer’s choice; polished aluminium rims, manufacturer’s choice Braking system 2-line brake system per EC regulation; EBS; 2 non-interchangeable coupling heads; spring-actuated parking brake; without connecting cable Electrics 24 Volt, multi-chamber rear lights; 2 x 7-pin non-interchangeable sockets; lighting per EC regulation; without connecting cable Bdjdswk Ux Nopfx Agmsh Hydraulics Low-pressure cylinder max. 170 bar with HDK threaded coupling; fixed section, NW 48 mm (without hose connection) Body Aluminium floor made of high-quality, abrasion-resistant material, 5 mm thick, Brinell 110, reinforced with U-profiles; side walls in hollow chamber profiles, precisely welded, with upper rail profile for bulk material shedding; front wall slanted, rear wall as pendulum tailgate with double-joint hinge, exterior mounting with double hook lock. Note! Suitable only for the transport of sand, gravel, and rolled chippings with a maximum grain size of up to 20 mm! All other transported goods are excluded from warranty! Paintwork Chassis shot-blasted, primed, and final coat single colour 2K/HS acrylic paint in DB Novagrau; body RAL 9010 pure white with 'Revolution' lettering Miscellaneous Foldable underrun bar; wheel chocks with holder; 1/2 shell plastic mudguards; with Dekra inspection and certificate (per §13 EC FGV); contour marking with reflective tape per ECE R 048, side in white, rear in red; shovel and broom holder mounted on front wall

Condition: used, empty load weight: 3,500 kg, maximum load weight: 14,500 kg, overall weight: 18,000 kg, first registration: 09/2016, next inspection (TÜV): 09/2024, loading space length: 6,500 mm, loading space width: 2,480 mm, loading space height: 1,200 mm, loading space volume: 19 m³, suspension: air, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Registration service, HU/SP/UVV, transfer to port Languages: German,Russian,English,Arabic Bedpfx Asww Dzgsgmjdh Light gray Extras in the equipment ABS, turntable, air brake, EBS, air suspension, disc brake, suspension: air-air, payload(kg):14500 Body type: Fliegl building material trailer, condition good Errors excepted.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,500 kg, maximum load weight: 29,500 kg, overall weight: 35,000 kg, axle configuration: 3 axles, loading space length: 9,830 mm, loading space width: 2,470 mm, loading space height: 1,750 mm, loading space volume: 41 m³, total length: 10,300 mm, total width: 2,550 mm, total height: 3,340 mm, suspension: air, tire size: 385/65 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Further Information Chassis, Saddle, Tipper Fine-grained steel welded construction, lightweight design, saddle plate with 2 interchangeable kingpins Curved front end, patented 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without thrust compensation 2 chock blocks with holder Underrun protection, foldable Half-shell mudguards Integrated mudguard holder, surface resistant to stone chipping With anti-splash flaps, only on the last axle 1 tarpaulin rod with holder 2 towing hooks at the rear Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned, reducing tire wear and fuel consumption Axles in off-road design Air suspension 1st axle automatic lift axle, including forced lowering and starting assist, activated 3 times by the brakes (starting assist is functional up to an axle load exceedance of 30% and up to a speed of max. 25 km/h) Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking System 2-line compressed air braking system, color-coded lines for easy maintenance. Bjdpfxoi Ri Efe Agmedh Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, Electronic Braking System with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! With lifting and lowering valve Vehicle - Driving Stability System Wheels and Tires 385/65 R22.5, manufacturer's choice Steel rims, factory silver Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chromed, with HDK screw coupling, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck auxiliary drive Dump Body Aluminum box dump body made of high-quality, abrasion-resistant material, front wall 5 mm thick, with external side walls made of 30 mm hollow chamber profiles, neatly welded, with a top profile that prevents spillage. Interior with ladder on the front wall (not in conjunction with Cramaro). Shovel and broom holder outside on the front wall. Greenline - tapered and aerodynamic dump body shape Membrane - Rear wall Rear wall pivotally mounted with double-joint hinge and with 2-part door division 1/2 to 1/2, at the top with swivel gantry, with one grain slide per door. Rear wall with rubber seal. Note! Heat-resistant up to max. 170°C! Bottom continuously 6 mm thick Standing platform with ladder, connecting plate for air/electricity and brake with large space for best possible operation. Roll-up cover on one side for placing in FR-right, with central locking in FR-left.

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 01/2018, Equipment: ABS, Visit our website to view our full inventory with numerous additional photos and information available in multiple languages. SEL 8382 Fliegl ZPS180 Building materials transporter / Alloy wheels / 40 mm German registration First registration: 25.01.2018 Gross vehicle weight rating (kg): 18,000 Permissible total weight (kg): 18,000 Unladen weight (kg): 3,450 VIN: WFDFLT21801007501 Vehicle inspection due: 02.2026 / Safety test: 08.2026 TYRES AND AXLES: Tyres: 385/65 R 22.5 Axle configuration: 2 axles / SAF Air suspension Disc brakes Alloy wheels BODYWORK: Internal dimensions: Width (m): 2.49 Length (m): 6.90 Side panel height (m): 1.00 VEHICLE DOCUMENTS: Registration certificate part I (Schein) Bdjdpfxsx Tmzzj Agmeh Registration certificate part II (Brief) M. BUFANO m. (Italiano, English, Deutsch) J. CORDEIRO j. (Português, Español, Italiano, English) J. MARJANOVIC j. (Deutsch, Bosanski) L. OBODYNSKA Ukrainian/Українська, Russian/Русский We speak: GERMAN, ENGLISH, ITALIAN, SPANISH, PORTUGUESE, UKRAINIAN, RUSSIAN, POLISH, BOSNIAN Every effort has been made to ensure the accuracy of the information provided; however, we accept no liability for mistakes or omissions. We advise customers to consult the provided photos. All measurements are approximate values. Our vehicles are sold strictly as-is in their current condition. We welcome our customers to visit us and inspect the vehicle in person. We also offer the opportunity for a test drive. Please note that the battery supplied with the vehicle is the one currently installed. If you would like a new battery, we are happy to provide pricing information.

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,200 kg, maximum load weight: 33,800 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,110 mm, suspension: air, tire size: 385/65R22,5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Further Information Chassis, Saddle, and Tipper Fine-grained steel welded construction, in basic lightweight design, saddle plate with interchangeable 2 kingpins Curved front end, patented Telescopic support in the center, uncoupling with load is not possible; when uncoupled, the vehicle must be tilted backward. Chocks with holder Underrun protection, foldable Half-shell fenders Integrated fender holder, surface designed to repel stones Tarpaulin rod with holder Towing hook at the rear Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Axles in off-road design Air suspension 1st axle: automatic lift axle, including forced lowering and starting assist Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking System 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! with lift and lower valve Vehicle - Driving Stability System Wheels and Tires 385/65 R22.5 Steel rims, factory silver "TPMS" Tire Pressure Monitoring System according to ECE R 141, display via the towing vehicle, via EBS, without truck installation (this must be possible in the truck. Only for standard tires). Electrical System 24 volts, multi-chamber lights, yellow LED lighting on the side Yellow LED lighting on the side, linked to the turn signal ("flashing side lights") 2 white position lights at the front 2 white/red outline lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chrome plated, with HDK screw connection, fixed part, NW 48 mm (without hose connection) Actuation hydraulically via truck auxiliary drive Body Steel round body in Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with externally mounted hydraulic cylinder with access ladder on the front wall. Greenline - conical and aerodynamic body shape Shovel and broom holder on the outside of the front wall. Membrane - rear wall Rear wall as a swing flap with double-hinge, externally supported with 2-fold hook lock. 2 clamping screws with cam locks on the side at the bottom. Side walls continuously 4 mm thick, floor 4/5 mm thick, wear-resistant and weight-optimized design Standing platform with access ladder, connection plate for air/electrical and brake connections with large clearance for the best possible operation. Roll-over tarpaulin on one side, to be placed on the right, with central locking on the left Registration country / signs Germany Type approval according to EG 2007/46 Body strength according to EN 12642 24/7 service hotline prepared for single-row license plate holder Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Painting Frame: DB 7350 Novagrau Bdsdpfxei Ri A Ie Agmeh "10-year warranty against rust-through" Support legs: galvanized Body: RAL color of your choice, solid color Roll-over

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,350 kg, maximum load weight: 28,650 kg, overall weight: 33,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,420 mm, loading space height: 1,750 mm, loading space volume: 30 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,400 mm, suspension: air, tire size: 385/65R22,5, tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are carried out individually according to customer requirements. Further information Chassis, semi-trailer, tipper Fine-grained steel welded construction, lightweight design, fifth wheel with 2 interchangeable kingpins Curved front panel, patented 24 tons, 2-speed landing gear, single-sided operation, with straight lower part, without slide-out compensation 2 support wedges with holder Underrun protection, foldable Half-shell fenders Tarp pole with bracket 2 towing hooks at the rear Axles + suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reducing tire wear and fuel consumption Axles in off-road design Air suspension 1st axle, automatic lift axle, including forced lowering and starting assist Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Brake system 2-line compressed air brake system, colored line routing for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line EBS, electronic brake system with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system Wheels and tires 385/65 R22.5, manufacturer's choice Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display via the towing vehicle's display, via EBS, without installation in the truck (this must be available in the truck. Only on the base tires). Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the side Yellow LED lighting on the side linked to the turn signal "flashing side marker lights" 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connecting cable Bdedoi Riziopfx Agmjh Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chrome plated, with HDK screw connection, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck auxiliary drive Tippers Aluminum box tipper made of high-quality, abrasion-resistant material, front wall 5 mm thick, with external side walls made of 30 mm hollow chamber profiles, cleanly welded, with a top profile that prevents bulk materials from shifting. Inside with a ladder on the front wall (not in connection with Cramaro). Shovel and broom holder on the outside of the front wall. Greenline - conical and aerodynamic tipper body shape Diaphragm - rear wall Rear wall as a swing gate with double hinge, externally mounted with double hook locking. Rear wall with rubber seal. Note! Heat-resistant up to max. 170°C! Floor continuously 6 mm thick Standing platform with ladder, connection plate for air/electricity and brake with large clearance for best possible operation. Roll-up cover on one side to be placed on the right, with central locking on the left Country of registration/Signs Germany with Dekra approval and certificate (according to §13 EC - FGV) 24/7 service hotline prepared for single-row license plate holder Contour marking with reflective strips according to ECE R 048, white on the side and red at the rear Paintwork Frame DB 7350 Novagrau "10-year warranty against rust-through" Tipper body RAL optional, solid color Roll-up cover RAL 7035 light g

Condition: used, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 10/2025, loading space volume: 50 m³, total length: 10,300 mm, color: black, gearing type: mechanical, fuel consumption (urban): 1,030 l/100km, lifting height: 3,700 mm, Permissible total weight: 24,000 kg, cargo space volume: 50 m³. Subject to errors and changes. Bdodpfx Agozpztbsmjh

Condition: used, maximum load weight: 6,740 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 05/2015, next inspection (TÜV): 10/2025, loading space length: 6,500 mm, loading space width: 2,480 mm, loading space height: 2,950 mm, loading space volume: 47 m³, total width: 2,550 mm, total height: 4,000 mm, Equipment: ABS, Internal number: 3372 ----Phone & WhatsApp: ----Fliegl TKF 118 tandem trailer, SDAH tarpaulin and side rails, sliding curtain, rear portal doors, permissible gross weight: 10,000 kg, technically possible: 11,800 kg, payload: 6,740 kg / 8,540 kg. First owner. TÜV (technical inspection): 10/2025. ----ABS/EBS, air suspension, height-adjustable drawbar, tires: 235/75 R17.5, tire condition: 20-30%, Duomatic coupling, rear portal doors, aluminum outriggers, loading height approx. 850 mm. ---- * We sell exclusively subject to our General Terms and Conditions. * We assume no liability for errors in the vehicle description. * The vehicle may be covered with or have advertising affixed. * We sell used spare parts for DB and MAN, such as engines, transmissions, axles, cabs, and bodies. Cranes, hooklifts, etc. For detailed information, please contact us by phone or at: Bdsdpfxjz Hzpuj Agmeh

Condition: used, maximum load weight: 18,000 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 12/2015, next inspection (TÜV): 02/2027, loading space length: 10,330 mm, loading space width: 2,520 mm, loading space height: 900 mm, Total weight: 24,000 kg / 30,000 kg Unladen weight: 6,000 kg Payload: 18,000 kg / 24,000 kg Overall length: 10,330 mm Loading length: approximately 8,300 mm overall / approximately 6,500 mm low-bed including rear overhang Width: 2,520 mm Loading height: 900 mm Further information: - 3 m widening - Warning signs front and rear - Twin tires - Spring-loaded ramp Bodpfx Agoz Igktemedh - Storage compartment in the gooseneck

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT22701003408, empty load weight: 4,800 kg, maximum load weight: 22,200 kg, overall weight: 27,000 kg, axle configuration: 2 axles, first registration: 01/2015, next inspection (TÜV): 02/2027, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R19,5", color: red, Please note: The images shown are archive photos. The vehicle may still be in operation at the time of inquiry. # 2-Axle Fliegl Mega Platform Semi-Trailer ## Weights & Dimensions * Gross Vehicle Weight (GVW): 27,000 kg * Payload (approx.): 22,200 kg * Axle load: 16,000 kg * Kingpin load: 11,000 kg * Unladen weight (approx.): 4,800 kg (± manufacturing tolerance) Bdedsy Sk U Ajpfx Agmeh * Overall length: approx. 13,850 mm * Overall width: max. 2,550 mm * Overall height: approx. 2,245 mm * Platform length: approx. 13,650 mm * Platform width: approx. 2,480 mm * Fifth wheel height: approx. 950 mm * Kingpin setting: approx. 1,680 mm * Front corner radius: approx. 2,040 mm --- ## Chassis – Mega Platform Semi-Trailer * High-tensile fine-grain steel welded chassis construction * Fifth wheel plate with replaceable 2" king pin * 13 pairs of recessed lashing rings integrated into the outer frame, each rated at 2.5 tonnes * Outer frame with integrated Load-Lock profile for quick attachment of lashing straps * 24-tonne two-speed landing gear, single-side operation, straight foot design, without thrust compensation * Wheel chocks with holders * Aluminium side underrun protection * Steel rear underrun protection * Quarter mudguards --- ## Axles & Suspension * 1st axle: SAF drum brake axle * 2nd axle: BPW drum brake axle * Air suspension --- ## Braking System * Dual-line compressed air braking system * Spring-loaded parking brake * Two non-interchangeable coupling heads at the front (without connecting hoses) * EBS (Electronic Braking System) with front EBS socket, without connecting cable * Integrated raise-and-lower valve * Vehicle Stability Control System Note: The trailer may only be operated with towing vehicles that ensure proper ABS functionality. --- ## Wheels & Tyres * 385/55 R19.5 tyres (manufacturer's choice) * Steel rims, factory silver finish --- ## Electrical System * 24 V electrical system * Multi-chamber rear lights * Yellow LED side marker lights, recessed as far as possible for maximum protection * 2 white front position lights * 2 white/red rear outline marker lights * 2 × 7-pin front sockets, without connecting cables --- ## Platform * Approx. 30 mm phenolic-coated plywood floor * Omega-reinforced cross joints * Longitudinal subframe supports for high point-load capacity * Suitable for forklift axle loads up to 7,100 kg Note: Minor floor distortion due to weather conditions is possible. --- ## Front Wall * Front wall, approx. 1,200 mm high * Heavy-duty steel corner posts in volume specification * Integrated inspection windows --- ## Registration & Compliance * Registration country: Germany * DEKRA inspection and certification included * 24/7 service hotline * Prepared for single-line licence plate holder * Rear warning plate according to ECE R70 * Reflective contour markings according to ECE R048 (white on the sides, red at the rear) --- ## Paint Finish * Chassis: RAL 3002 Carmine Red * Landing gear: black coated * Front wall: RAL 3002 Carmine Red --- Please note: The images shown are archive photos. The vehicle may still be in operation at the time of inquiry.

Condition: used, maximum load weight: 14,310 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2013, next inspection (TÜV): 01/2027, loading space length: 6,934 mm, loading space width: 2,486 mm, loading space height: 800 mm, total length: 8,750 mm, total width: 2,550 mm, total height: 2,600 mm, Equipment: ABS, * Wooden floor with rail system * Folding side walls * Fixed front wall * Air suspension * Storage boxes * SAF axles with drum brakes * Wabco Trailer EBS-E -----* Tire size: 385/65R22.5 * Technically permissible total weight: 18,000 kg * Tare weight: 3,690 kg * Overall length: 8,900 * Next inspection due: 07/2026 ----Vehicle number/Vehicle: 12370----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed.-----We will gladly assist you with all formalities involved in purchasing a vehicle. Simply let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, arrangement of financing, application for export license plates, vehicle delivery, vehicle registration, salvage and vehicle transport.----?YOUR VTS TEAM Bsdpoztihujfx Agmjdh

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT33903000364, empty load weight: 6,120 kg, maximum load weight: 28,880 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 12/2022, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,800 mm, total width: 2,550 mm, suspension: air, tire size: 235/75 R17,5", color: silver, Please note: The images are archive photos! The vehicle may still be in use! Weights and Dimensions: Permissible/technical gross weight: 35,000 / 39,000 kg Permissible/technical payload approx.: 28,880 / 32,880 kg Permissible/technical aggregate load: 24,000 / 27,000 kg Permissible/technical fifth wheel load: 11,000 / 12,000 kg Unladen weight (basic version) approx.: 6,120 kg +/- manufacturing tolerance Overall length approx.: 13,800 mm Maximum overall width: 2,550 mm Overall height approx.: 2,388 mm Gooseneck length approx.: 4,050 mm Low bed length approx.: 9,600 mm Loaded loading height in the low bed approx.: 900 mm Internal width approx.: 2,480 mm Coupling height approx.: 950 mm King pin installation dimension approx.: 1,680 mm Front corner dimension approx.: 2,040 mm Chassis Semi-Trailer Forwarder Fine-grained steel welded construction, fifth wheel plate with replaceable 2" king pin Telescoping front low bed extendable by approx. 1,500 mm, lockable every 500 mm Slightly inclined outer frame, new design with 'Load-Lock profile' for attaching lashing straps 'Patented Load-Lock-Cross' for lashing straps integrated in the cross member under the outer frame 24 t, 2-speed landing gear, single-sided operation, with straight lower part, without compensating support Free landing gear corner dimension and rear swing clearance approx. 1,920 mm Aluminum side underrun protection Steel rear underrun protection Quarter-shell mudguards 9 pairs of lashing/rack rails transverse in the floor, embedded up to the main frame, approx. 100 mm high. With 20 mm round steel rails, top and bottom, distance between upper and lower rails approx. 60 mm (of the round steel). Bottom has angle plate, half open downward. For lashing and inserting stakes 80 x 80 mm (3 pairs in the neck, 6 pairs in the low bed section). 3 pairs of stake pockets recessed in the outer frame, approx. 72 x 42 mm internal dimension Axles & Suspension Drum brake axles according to manufacturer specification 'Axle/chassis laser-aligned' – reduces tire wear and fuel consumption Air suspension Brake System 2-line compressed air braking system Color-coded lines for easy service Spring-loaded parking brake 2 error-proof coupling heads at front, without connecting line EBS, Electronic Braking System with EBS socket at front, without connection cable Note: The trailer may only be towed by tractors with functional ABS! With raise & lower valve Vehicle driving stability system Wheels and Tires 235/75 R17.5, manufacturer at discretion Steel rims, factory silver Electrical System 24V, multi-chamber lights, side-mounted yellow LED lighting (recessed) 2 white position lights at front 2 white/red lane marker lights at rear 2 x 7-pin error-proof sockets at front, without connecting cable 1 additional LED work light at rear, operated via reverse light Floor Anti-slip phenolic plywood panels, approx. 30 mm thick, high point load capacity, suitable for forklift axle loads up to max. 5,600 kg Bdsdpfjy Slhqsx Agmeh Front wall / Corner stakes front 25 mm aluminum hollow profile, 1,350 mm high Country of registration / license plates Germany Inspection and certification in Bosnia 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on sides, red at rear Warning sign according to ECE - 70 Paintwork Frame: Hot-dip galvanized including passivation '15-year warranty against rust-through' Front corner stakes: Hot-dip galvanized Front wall: Aluminum