Low loader trailer

MÜLLER-MITTELTAL 14,4 to. Tandem Tieflader mit Auffahrrampen

Condition: new, maximum load weight: 10,900 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: * Tire pressure monitoring system (RDÜ) * Electronic braking system (EBS) * Emergency release device for spring brake cylinders * LED lighting * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with equalizer assembly * Drawbar height adjustable by approx. 300 mm * Drawbar extension by 250 mm to 2,250 mm * Jost landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox mounted front right, outside on the bulkhead * Side underrun protection * Plastic quarter mudguards * Hot-dip galvanized chassis and drawbar * Bulkhead * Rear wall * Tailgate and loading ramps * 50 mm softwood floor * Preparation in front of the bulkhead for retrofitting container locks * Bolted bulkhead from smooth sheet metal * Side walls made from trapezoidal profiled steel sheet, foldable, with drop-side lifting assistance * Steel rear wall, can be inserted between ramps (storage bracket for when not in use inside at the front bulkhead) * Bolted rear posts * Perforated external frame, approx. 45° angled, with 2 t lashing capacity every 480 mm, installation of 3 t folding lashing rings every 600 mm possible, 1 x 6.3 t lashing ring in each front and rear corner, various bores for 1.2 t lashing options in front and rear cross members * One-piece mechanical mesh loading ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm) Gsdpexglibefx Acvsui * Rear approach angle approx. 860 mm * --Enhanced and certified body according to EN 12642 XL including load securing certificate-- * Drop-side color in RAL 2011 deep orange * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from KW 46 / 2025 * Sample images

Condition: new, maximum load weight: 10,900 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: * RDÜ (Tire Pressure Monitoring System) * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders * LED lighting * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with compensation aggregate * Drawbar height adjustable by 300 mm Gedpfx Ajq Dyvvecvjui * Drawbar extension by 250 mm to 2,250 mm * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox on the front right side of the bulkhead * Side underrun protection * Plastic quarter mudguards * Hot-dip galvanized chassis and drawbar * Bulkhead * Rear wall * Tailgate and loading ramps * 50 mm softwood floor * Pre-equipment in front of the bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Sidewalls made of trapezoidal profiled steel sheet, hinged with drop-side spring assist * Steel rear wall retractable between ramps – bracket for storage inside at the bulkhead when not in use * Bolted rear stanchions * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm; installation of 3 t lashing rings every 600 mm possible; in each corner (front and rear) one 6.3 t lashing ring; various holes in the front bulkhead and rear cross member for 1.2 t lashing options * One-piece mechanical grating ramps with spring mechanism for one-man operation, approx. 2,750 x 600 mm (retractable down to 20 mm) * Rear approach angle approx. 860 mm * --Reinforced and certified body according to EN 12642 XL incl. load securing certificate-- * Drop-side color in RAL 9010 pure white * Side wall painting available in any RAL color for an additional charge * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available from Egestorf

Condition: new, maximum load weight: 10,900 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: * RDÜ (Tire Pressure Monitoring System) * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders * LED lighting * Drum brakes * 2 x 7 t Gigant axles * Parabolic springs with equalizing unit * Height-adjustable drawbar, adjustable by approx. 300 mm * Drawbar extension by 250 mm to 2,250 mm * Jost landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox mounted on the front right exterior of the bulkhead * Side underrun protection * Plastic quarter fenders * Hot-dip galvanized chassis and drawbar * Front wall * Rear wall * Tailgate and loading ramps * 50 mm softwood floor * Provision for retrofitting container locks in front of the bulkhead * Bolted smooth sheet steel front wall * Side walls made from trapezoidal-profiled steel, foldable with drop-side spring assist * Insertable steel rear wall between the ramps; holder for stowage in front of the bulkhead when not in use * Bolted rear stanchions * Perforated outer frame angled at approx. 45 degrees, with 2 t lashing capacity every 480 mm; possible installation of 3 t drop lashing rings every 600 mm; in each corner, front and rear, 1 x 6.3 t lashing ring; various holes in the front and end cross members for 1.2 t lashing options * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear entry ramp approx. 860 mm * --Reinforced and certified body according to EN 12642 XL including load securing certificate-- * Drop side color in RAL 9010 pure white Gjdpfx Acorvvflsvsui * Painting of side walls in any RAL color available at extra cost * New vehicle with manufacturer’s warranty * Errors and intermediate sale subject to change * Immediately available from Egestorf

Condition: new, maximum load weight: 10,750 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: * RDÜ tire pressure monitoring * EBS brake system * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 tonnes Gigant axles * Parabolic springs with compensating unit * Drawbar height adjustable by 300 mm - Drawbar extension by 250 mm to 2,250 mm * 15-pin power connector * LED lighting * Front landing gear * External folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, front right outside on the bulkhead * Side impact protection * Plastic quarter fenders * 50 mm softwood floor * In front of the bulkhead and rear slope, provision for retrofitting container locks for transporting 20" containers * Bolted bulkhead made of smooth sheet metal * Trapezoidal sheet steel side walls, foldable, split in the middle once * Steel rear wall can be inserted between the ramp brackets when not in use * Bolted rear stanchions * Perforated outer frame Approx. 45-degree canted with a 2-ton lashing capacity every 480 mm, installation of 3-ton drop lashing rings possible every 600 mm, 1 x 6.3-ton lashing ring in each of the front and rear corners, various holes in the front and end beams for 1.2-ton lashing capacity * One-piece mechanical grating loading ramps with spring mechanism for one-person operation, approx. 2,750 x 600 mm (collapsible up to 20 mm) * Rear approach slope approx. 860 mm chassis * Drawbar, front wall, tailgate, folding supports, and loading ramps hot-dip galvanized * Axles, springs, air chamber, flanged drawbar eye, and landing gear painted in a single black tone -- Gjdjv Eq Evjpfx Acveui * Reinforced and certified body according to EN 12642 XL including load securing certificate-- * Wheelbase 1,140 * Side walls painted in black RAL 9010 pure white * Side panels can be painted in a RAL color for an additional charge * New vehicle with manufacturer's warranty * Errors and prior sale subject to change * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 10,750 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: * RDÜ Tire Pressure Monitoring System * EBS Braking System * Emergency Release for Spring Brake Cylinders * Drum Brakes * 2 x 7 t Gigant Axles * Parabolic Springs with Equalizing Unit * Drawbar height-adjustable by approx. 300 mm – drawbar extension by 250 mm to a total of 2,250 mm * 15-pin electrical connector * LED Lighting * Support crank at front * Folding external stabilizer legs at rear * Plastic tool box approx. 858 x 500 x 500 mm mounted front right outside on the front wall * Side underrun protection * Plastic quarter mudguards Gjdpfxsv D Tcbj Acveui * 50 mm softwood floor * Fixture in front of front wall and rear slope for subsequent installation of container locks for transporting 20" containers * Bolt-on smooth sheet front wall * Side walls made of trapezoidal profile steel sheet, drop-down, divided once in the middle * Steel rear wall, slidable between the ramp brackets, can be stored inside in front of the front wall when not in use * Rear stanchions bolted * Perforated outer frame, approx. 45 degrees angled, with 2 t lashing capacity every 480 mm, provision for installation of 3 t folding lashing rings every 600 mm, 1 x 6.3 t lashing ring each in the front and rear corners, various holes in the front and rear cross members for 1.2 t lashing options * One-piece mechanical grating approach ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be compressed to 20 mm) * Approach slope at rear approx. 860 mm on chassis * Drawbar, front wall, tailgate, folding supports, and approach ramps hot-dip galvanized * --- Axles, springs, air tanks, flange coupling, and support crank painted in black --- * Reinforced and certified structure according to EN 12642 XL incl. load securing certificate -- * Wheelbase 1,140 mm * Bodywork painted in RAL 9010 pure white * Body sides can be painted in a RAL color at extra charge * New vehicle with manufacturer's warranty * Subject to errors and prior sale * Available from CW 47/2025