Used Müller-Mitteltal Pt Trailers for sale (243)

Condition: used, maximum load weight: 12,080 kg, overall weight: 14,400 kg, axle configuration: 2 axles, first registration: 06/2024, loading space length: 3,900 mm, loading space width: 1,920 mm, loading space height: 415 mm, Year of construction: 2022, Equipment: ABS, * ETM-TA 14.4: ----Brakes: * Wabco ABS brake system * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7-ton Gigant axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Drawbar Eye: * Height-adjustable drawbar (+/- 150 mm) * 40 mm bolt-on drawbar eye ----General Attachments: * Jost landing gear at the front * Side underrun protection * Rear folding A-board ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----Body: * Fixed steel front and side walls * Removable steel rear wall * Floor made of 50 mm softwood * 1 sliding plate support 750 x 1,000 mm at the front section including 2 removable skip stops at the front, lockable in 2 positions * Rear traverse for attaching aluminium loading ramps, incl. 2 additional rear drop-down supports Hsdpsl Th Dmjfx Af Sjfc ----Loading Edge: * Unloaded loading edge approx. 710 mm ----Load Securing: * 4 removable skip stops, can be locked in 2 positions for side centering of skips * 1 x (13.5 t) UVV lashing point per side for attaching tie-down elements * 2 ratchet tensioners (spindle adjustment) with compensating chain and quick shortener (tensioning force 6,300 kg) ----Tyres: * Tyres: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Paintwork: * Chassis, front wall, side walls, mudguards, drawbar, rear drop-down supports hot-dip galvanized * Axles, springs, landing gear, and air reservoirs painted in black ----General Info: * Vehicle registered for one day in 06/2024, due to missing tyre pressure monitoring system; never loaded or used * Errors and prior sale excepted ----Delivery Time: * Immediately available ex Egestorf (A7)

Condition: used, maximum load weight: 10,870 kg, overall weight: 14,400 kg, axle configuration: 2 axles, first registration: 06/2025, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2023, Equipment: ABS, * KA-TA-R 14.4: * Wabco ABS * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 7 ton Gigant axles * Parabolic springs with tandem equalizer unit * Drawbar height adjustable by approx. 300 mm with 40 mm flange towing eye * Jost mechanical landing gear at the front * Two mechanical folding supports at the rear * Plastic toolbox approx. 650 x 350 x 320 mm, mounted at the front on the right side of the chassis * 15-pin power connector * Multi-chamber tail lights * Bolt-on underride guard * Plastic quarter mudguards * Net hooks at each position of the central locking and 2 hooks on the front wall * Chassis made of fine-grain steel * Steel pallet 3-way tipping body, continuous side walls at the top with internal pipe reinforcement - without central stanchions, foldable with drop-side spring lifter * Rear stanchions bolted * Combo steel swing doors at the rear, 2-wing asymmetrically split, can be swiveled and locked to 270° - not foldable - with additional pendulum frame for automatic tailgate opening during tipping process, locking via galvanized rotary bar lock at the rear and central locking, deactivation function for automatic tailgate during reverse tipping with opened swing door * Each corner with 1 x 5 ton lashing point and 4 x 3 ton lashing rings recessed into the outer frame on each side * 4 mm steel sheet floor made of fine-grain steel * Rear mounting rail for loading ramps * Reinforced body with load securing certificate * 1 pair of aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 tons per pair) suitable for rubber-tired & tracked vehicles * Lockable storage compartment from the rear recessed under the loading area in the chassis for the ramps * Chassis, drawbar, underride guard, rear stanchion, rear folding supports hot-dip galvanized * Axles, springs, air tank and landing gear painted black * Tires 285/70 19.5 * Side walls painted in RAL 9010 pure white * Painting of the side walls in a different RAL color available at extra cost * Vehicle has a day registration (unused) * Errors and prior sale excepted * Immediately available from Egestorf Hedpfjl Th Duox Af Sofc

Condition: new, maximum load weight: 10,800 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: ----Brakes: * EBS brake system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic suspension with equalizing unit ----Drawbar / Flange Drawbar Eye: * Drawbar height-adjustable by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm ----Electrics / Lighting: * Tire pressure monitoring with display functionality in the truck via EBS signal – no truck-side installation required * 15-pin power socket * LED lighting system 12 / 24 V Hfsdperwc R Rofx Af Soc * Multi-voltage EBS system for towing vehicles with 12 and 24 V electrics ----General Attachments: * Support winch at the front * Externally mounted folding supports at the rear * Plastic toolbox approx. 858 x 500 x 500 mm mounted front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood flooring * Provision in front of the bulkhead for retrofitting container locking devices * 400 mm bolt-on smooth steel bulkhead * Bolt-on rear stanchions * Drop sides with spring-assisted lift ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings possible every 600 mm * 1 x 6.3 t lashing point in each front and rear corner * Various holes in the front and rear beams for 1.2 t lashing points * Profifix lashing rail centrally along the longitudinal axis for lashing capacity up to LC 3000 daN ----Ramps: * Single-piece hydraulic steel grate loading ramps, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Hydraulic flow divider in the trailer (for hydraulic pump performance in the truck from over 40 l/min up to a max. of 140 l/min) ----Paintwork: * Chassis, drawbar, bulkhead, mechanical drop supports, and loading ramps hot-dip galvanized * Axles, springs, air tank, front support winch, and flange drawbar eye painted in black * Drop sides painted RAL 9010 pure white * Painting of side walls in any RAL color available at extra charge ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. week 16/2026

Condition: used, maximum load weight: 8,650 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 10/2016, Equipment: ABS, Welcome to Johanning’s Commercial Vehicles, your specialist for young and exclusive used vehicles. AVAILABLE IMMEDIATELY! Delivery possible. Price on request! Financing & leasing available upon request. Location: 39606 Osterburg, incoming stock! Make: Mueller Mitteltal Model: TA-2 / ETUE-TA-R 11.9 Year of manufacture: 2016 Operating weight: 3,250 kg Hfodpfx Afsycpd Ae Soc Inspection (TÜV): March 2026 Safety inspection (SP): September 2026 For additional photos or videos, feel free to ask. Johanning’s Commercial Vehicles – your partner for exclusive and young used vehicles. Our services – your advantages: (after purchase) - Trade-in of your vehicle possible (any condition) - Immediate deregistration of your vehicle free of charge - Registration service for €150 (including fees and license plates) - Short-term registration available - Viewing and test drive possible at any time by telephone appointment - Free delivery by arrangement possible. Subject to errors and prior sale.

Condition: used, maximum load weight: 5,000 kg, overall weight: 7,200 kg, axle configuration: 2 axles, first registration: 04/1979, Year of construction: 1979, 3-way tipper trailer in 80 km/h version, 2-circuit air brake system, rear towing hitch with hydraulic connection and brake connections for an additional trailer. Steel side panels. According to the owner, the trailer is in good functional condition! Sold as is, without TÜV, on behalf of the customer. Cash price €3,900. Hjdpfexzzglox Af Ssfc

Condition: new, maximum load weight: 10,950 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2026, Equipment: ABS, tail-lift, Müller-Mitteltal ETÜ-TA-R 14.4 Tandem ? Low Loader ? Platform ? Trailer Available at the end of February ’26 | Ref. No. for inquiries: 27678 | Free delivery to your address possible * We are happy to provide you with an individual offer * ---- * Gross weight: 14.4 t, Payload: 10.95 t * LED lighting system * GIGANT axles, EBS, twin tires 235/75R 17.5, parabolic springs * Tire pressure monitoring system (TPMS) * 6.27 m x 2.47 m platform with galvanized front wall, 400 mm high Hjdpfx Asyadz Rof Sofc * Hardwood excavator bucket rest bolted to the front wall * Deck height unladen 930 mm / laden 870 mm * One-piece ramps with hot-galvanized grating, anti-slip design, extendable to approx. 20 mm, secured by support rods and diagonal bracing * Ramp lifter with vertically mounted, adjustable springs for easy single-person operation * 4 UVV drop lashing rings (LC 6300 daN) * Perforated outer frame (45° bent with hole pattern for lashing equipment, lashing force per point LC 2000 daN, min. spacing of 480 mm. Installation of drop lashing rings LC 3000 daN with approx. 600 mm spacing possible) with closely spaced cross-members, high-profile front and rear ends, rear incline, hot-galvanized * 10 UVV flush-mount lashing rings LC 3000 daN can be recessed into existing hole pattern in the outer frame, in addition * Additional lashing points via holes (Ø 50 mm, LC 1200 daN) in front and end crossmembers * Toolbox in front of the bulkhead * Side marker lights with indicator function * 50 mm thick softwood floor. Chassis hot-galvanized * 2 recessed container locks in front crossmember * Height-adjustable support winch at front, drop-down supports at rear * Drawbar with 40 mm towing eye (hot-dip galvanized), height-adjustable, optionally available with 50 mm towing eye * 1 removable LED beacon at the rear---- * Leasing, hire purchase, financing, trade-in possible * e.g. €515 per month with 60 months term – no down payment, no residual value * ---- * Our opening hours * Monday - Thursday: 08:00 - 17:00 * Friday: 08:00 - 15:00 Outside these hours, we are available by appointment. We speak German, English, Polish, and French. Leasing, financing, and trade-in available.

Condition: like new (used), functionality: fully functional, empty load weight: 4,730 kg, maximum load weight: 13,270 kg, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 03/2026, loading space length: 6,270 mm, loading space width: 2,540 mm, total length: 8,520 mm, total width: 2,540 mm, total height: 3,500 mm, tire size: 235 75 R17,5, tire condition: 90 %, Year of construction: 2022, The central axle trailer by Müller Mitteltal is in very good, lightly used condition with an unladen weight of 4,730 kg, payload of 13,270 kg, gross weight of 18 t, length 8,520 mm, width 2,540 mm, height 3,500 mm. It is a twin-axle trailer with twin wheels, air suspension, and galvanized frame. VAT not deductible. Hjdpfx Aeyc Hghsf Ssfc

Condition: used, maximum load weight: 14,030 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 08/2022, total width: 25,500 mm, total height: 12,500 mm, For sale is a combination trailer from Müller Mitteltal (EA-T KOMBI 18.0) First registration: /2022 Suitable for both hook-lift containers and skip containers (conversion required) Hot-dip galvanized Gross vehicle weight: 18,000 kg (technically up to 20,000 kg) Drawbar can be lowered pneumatically! Total length = 9,500 mm Width = 2,550 mm Suitable for: 2x skip containers or 1x hook-lift container 9-wheel configuration Tire tread: 0.9 cm - 0.7 cm Visit us on Facebook! (chsl) or contact us via WhatsApp: All information is provided without guarantee of completeness or accuracy. Offer is subject to change without notice. Subject to prior sale and errors. No properties are expressly guaranteed. We recommend inspecting the vehicle before purchase. Hedpfoybddbjx Af Sefc

Condition: used, maximum load weight: 13,820 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 07/2020, next inspection (TÜV): 10/2026, loading space length: 5,000 mm, loading space width: 2,380 mm, loading space height: 900 mm, total width: 2,550 mm, total height: 2,450 mm, Equipment: ABS, Tandem three-way tipper trailer ABS Air suspension Support leg at front Platform at front wall Aluminum drop sides Foldable underrun protection Wheelbase 1,000 mm Gross weight 18,000 kg Payload 13,820 kg Tyres 385/65R22.5, 40-80% tread Hodpoyawayofx Af Sefc Vehicle No. 2428 for inquiries. Trailer in very good overall condition, first owner. No liability for typing or data transmission errors. Subject to change and prior sale. Daily cash purchase of commercial vehicles, construction machinery, trailers, and semi-trailers built from 2000-2025.

Condition: new, maximum load weight: 6,810 kg, overall weight: 9,600 kg, axle configuration: 1 axle, loading space length: 4,030 mm, loading space width: 2,420 mm, loading space height: 700 mm, Year of construction: 2025, * EK 9.6 ----Brakes: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * SAF axle ----Suspension: * Parabolic springs ----Drawbar / Towing Eye: * Drawbar as a center axle with 40 mm bolted towing eye * Continuously adjustable drawbar height with spindle lifting element instead of a fixed drawbar Hjdjw Ndr Uepfx Af Sofc ----Coupling Height: * Standard coupling height approx. 900 mm (+/- 150 mm) ----Electrics / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal – no installation required on the truck side * 15-pin power connector * LED tail lights * Flashing side marker lamps ----General Attachments: * Support windlass at the front * Enclosed plastic mudguards * Folding underrun protection for paver ----Chassis: * Chassis made of fine-grained steel ----Tipper Body: * Pal.- 3-way tipper body * 700 mm steel front wall * Continuous aluminium side walls, asymmetrical, foldable down without center stanchion, with long-path fasteners and swinging function via manual central locking * 800 mm high steel rear wall with automatic rear wall opening during tipping towards the rear * 4 mm Hardox 450 steel floor ----Load Securing: * Two pairs of 3 t lashing rings per side, sunk and foldable in the steel floor ----Paintwork: * Chassis, drawbar, underrun protection hot-dip galvanized * Tipper body painted in RAL 9010 pure white ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available ex Egestorf

Condition: new, maximum load weight: 10,760 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: ---- Brakes: * Drum brakes * Electronic braking system (EBS) * Emergency release device for spring brake actuators ---- Axles: * 2 x 7 t Gigant axles ---- Suspension: * Parabolic springs with compensating unit ---- Drawbar / Flange towing eye: * Height-adjustable drawbar, adjustable by 300 mm * Drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange towing eye ---- Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ---- General attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized foldable support legs at the rear * Plastic toolbox, fitted externally at the front right on the bulkhead * Side underrun protection * Plastic quarter mudguards ---- Lowbed deck: * 50 mm softwood floor * Preparation in front of bulkhead for retrofitting container locks * Bolted bulkhead made of smooth steel sheet * Side walls made of steel, trapezoidal profile, foldable, with drop-side spring assist * Rear wall made of steel, retractable between the ramps – bracket for storage when not in use, fitted inside at the front bulkhead * Removable bolted rear stanchions ---- Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option to install 3 t recessed lashing rings every 600 mm * 1 x 6.3 t lashing point in each of the four corners (front/rear) * Various boreholes in the front and end crossmember for 1.2 t lashing options Hodpjrvvflsfx Af Sofc ---- Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be slid together up to 20 mm) * Rear approach angle approx. 860 mm ---- Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, ramps, and rear wall * Side panel color RAL 9010 pure white * Side wall painting in any RAL color available for an additional charge ---- Information: * --Reinforced and certified body as per EN 12642 XL, including load securing certificate-- * New vehicle with manufacturer's warranty * Errors and prior sale excepted ---- Delivery time: * Available from week 08/2026

Condition: new, maximum load weight: 13,490 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, * TRA-Kombi 18.0: * TPMS (Tire Pressure Monitoring System), display possible in the truck via EBS signal (no truck-side installation required) * EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 10.5 ton axles * Air suspension with manual lowering at the rear * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment device * Tool box made of powder-coated sheet steel, plus spare wheel holder in basket design on the right side * Reflective contour marking strips on the sides and rear * Closed side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact protection buffers * Foldable A-board at the rear * LED rear lights * 15-pin power connector * Hot-dip galvanized main frame with raised outer frame for guiding roll-off containers * Sheet steel floor with roller recesses in the bogie area * For roll-off container transport: container length from 5,500 to 7,000 mm possible * Pneumatic 4-point container locking system and mechanically insertable stop angles at the front on the track * Load securing certificate according to DIN 30722-1 * 1 transport of up to 2 skip containers with max. 10 m³ volume possible * Includes 8 repositionable skip stops for lateral centering of skips, front 4 skip stops are plug-in with pivoting stops * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning devices for positive and non-positive securing of skips; 4 lashing cleats each in cloverleaf design (side) and 1 pair of 13.4 t UVV lashing rings at the front * Load securing package with an additional 4 x 8 t lashing eyes per side recessed into the outer frame * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Weld seam as anti-slip surface in the ramp area of the approach slope * Mechanical drop-down supports at the rear * Aluminum loading ramps (10.6 t/pair) 2,800 x 470 mm suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) Hedpfxjl Tnwzj Af Ssfc * --Permissible total weight technically possible: 20,000 kg-- * New vehicle without initial registration with manufacturer’s warranty * Subject to errors and prior sale * Immediately available ex Egstorf

Condition: new, maximum load weight: 13,490 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, * TRA-Kombi 18.0: * RDÜ (Tire Pressure Monitoring), display possible in the truck via EBS signal (no truck-side installation required) * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes * 2 x 10.5-ton axles * Air suspension with manual lowering at the rear * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye and height adjustment * Tool box made of powder-coated sheet steel and spare wheel holder in basket design, mounted on the right side * Contour tape on sides and rear, reflective * Enclosed side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact buffers * Foldable A-sign at the rear * LED tail lights Hfjdpol Tld Ijfx Af Ssc * 15-pin electrical connector * Hot-dip galvanized main frame with raised outer frame for guiding roll-off containers * Steel sheet floor with roll recesses in the bogie area * For roll-off container transport, container length from 5,500 to 7,000 mm possible * Pneumatic four-point clamp locking and mechanical plug-in front stop angles on the guide track * Load securing certificate according to DIN 30722-1 * 1 transport operation for up to 2 skip containers with max. 10 m³ volume possible * Includes 8 repositionable skip stops for lateral centering of skips; front 4 skip stops plugged in and with pivoting stops * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning devices for positive and non-positive securing of the skips; 4 lashing bars in cloverleaf design (on the sides) each and 1 pair of 13.4 t UVV lashing rings at the front * Load securing package with additional 4 x 8 t lashing rings each side, integrated into the outer frame * Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Weld bead as anti-slip coating in the ramp area of the inclined plane * Mechanical drop-down supports at the rear * Aluminium loading ramps (10.6 t / pair) 2,800 x 470 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment accessible from the rear) * --Permissible gross vehicle weight technically possible: 20,000 kg-- * New vehicle without first registration, with manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Condition: new, maximum load weight: 10,760 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Draw Eye: * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm (total length 2,250 mm) * 40 mm flange draw eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Attachments: * Jost landing gear at the front * Externally mounted hot-dip galvanized folding supports at the rear * Plastic toolbox at the front right outside on the bulkhead * Side underrun protection * Quarter plastic mudguards ----Low Loader Deck: * 50 mm softwood floor * Preparation at the front bulkhead for retrofitting container locks * Bolted smooth steel bulkhead * Fold-down side panels made from trapezoidal-profiled steel sheet with drop-side lifting assist * Retractable steel tailgate between the ramps (storage bracket inside in the front when not in use) * Bolted rear posts ----Load Securing: * Perforated outer frame, approx. 45 degrees angled, with 2 t lashing capacity every 480 mm * Option for 3 t drop lashing rings every 600 mm * One 6.3 t lashing ring in each front and rear corner * Various bores in the front and rear cross-members for 1.2 t lashing points ----Ramps: * One-piece mechanical mesh access ramps with spring assist for single-person operation approx. 2,750 x 600 mm (can be retracted to 20 mm) Hodpfx Ajxglibof Sjfc * Rear approach slope approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, front bulkhead, access ramps, and rear wall * Drop-side color in RAL 2011 deep orange * Side panels can be painted in any RAL color for an extra charge ----Info: * Reinforced and certified body as per EN 12642 XL, including load securing certificate * New vehicle with manufacturer's warranty * Subject to prior sale and errors excepted ----Delivery Time: * Available from calendar week 08/2026

Condition: new, maximum load weight: 10,760 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (300 mm adjustment range) * Drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange towing eye ----Lighting / Electrics: * TPMS (Tyre Pressure Monitoring System) * LED lighting ----General Accessories: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox mounted front right, outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood flooring * Preparation in front of the bulkhead for retrofitting container locks * Bolted smooth sheet steel bulkhead * Foldable side walls made of trapezoidal steel plate with drop-side lift assist * Steel rear wall, insertable between the ramps - storage bracket located inside, in front of the bulkhead when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Optional installation of 3 t drop lashing points every 600 mm * 1 x 6.3 t lashing rings in each front and rear corner * Various holes in front and rear end crossmembers for 1.2 t lashing options ----Ramps: * Single-piece mechanical grid ramps with spring mechanism for one-person operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm) Hfjdpfx Afsq Dyvvj Ssc * Rear drive-on angle approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, access ramps, and rear wall * Side wall color in RAL 9010 pure white * Painting of side walls in other RAL colors available at extra cost ----Information: * --Reinforced and certified body according to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Available from CW 08/2026

Condition: new, maximum load weight: 10,760 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic brake system (EBS) * Emergency release device for spring-loaded cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange towing eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Attachments: * Jost landing gear front * Externally mounted, hot-dip galvanized folding supports rear * Plastic toolbox, front right, mounted externally on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor Hfodpfxsxglh Rj Af Ssc * Preparation in front of the bulkhead for subsequent installation of container locks * Screw-fastened bulkhead of smooth sheet metal * Side walls made of trapezoidal steel sheet, drop-down with drop side spring lifter * Steel tailgate, retractable between ramps – rack for idle position mounted inside on the bulkhead * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings possible every 600 mm * Each front and rear corner equipped with 1 x 6.3 t lashing ring * Various holes in the front and rear crossmembers for 1.2 t lashing options ----Ramps: * One-piece mechanical grid ramps with spring unit, suitable for single-person operation, approx. 2,750 x 600 mm (can be telescoped down to 20 mm) * Approach bevel at the rear approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, access ramps and rear wall * Drop side colour in RAL 2011 deep orange * Painting of side walls in any RAL colour available at extra cost ----Info: * -- Reinforced and certified superstructure according to EN 12642 XL incl. load securing certificate -- * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available from week 08/2026

Condition: new, maximum load weight: 31,630 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 9,250 mm, loading space width: 2,520 mm, * T 4: * EBS (Electronic Braking System) * Emergency release system for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle equalization front and rear * Tire pressure monitoring with in-cab display via EBS signal – no truck-side installation required * Warning sign packages front & rear * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable LED beacon (rear) * 24 V - 15-pin and additional 12 V - 7+4-pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and infinitely adjustable height * Tool box made of powder-coated steel sheet, and basket-style spare wheel holder on the right side * Front closed plastic single mudguards * Rear straight steel mud flaps each with spray suppression * Side underrun protection * Offset cranked drawbar extended by 500 mm to the front * Turntable platform front extension by 520 mm with 45° corners and 3 recessed lockable storage compartments with lids * Chassis made of high-strength fine-grain steel * Floor above turntable platform 50 mm softwood, low-bed platform 60 mm softwood * Outer boards of ramps made from 50 mm bamboo * Four stake pockets on each side (stakes not included), each with 2 t lashing capacity * Lashing package consisting of: 2 lashing eyes 6.4 t front left and right on main frame of turntable platform, one pair of 13.4 t lashing rings at front and rear on outer frame, four pairs of 10 t swivel and lowerable lashing rings per side, loadable in all directions and recessed into outer frame, two pairs of 6.4 t lashing rings on the side in the excavator arm rest area, eight pairs of galvanized folding outriggers for 3 m total width (not at rear slope) * Side extension boards stored on the left in a storage compartment * Excavator arm tray above rear axle to end of rear slope, approx. 2,300 x 740 x 190 mm * Mechanical drop-down supports at the rear * Hydraulic, hot-dip galvanized ramps approx. 3,000 x 720 mm * Hydraulic side ramp shift on slide tube from ramp shaft * Loading platform above turntable: approx. 2,990 x 2,520 mm * Rear loading platform: approx. 6,280 x 2,520 mm * Loading height loaded approx. 860 mm (incl. 860 mm rear slope) Hsdpfol Th Evjx Af Ssfc * Chassis, turntable, ramps, mechanical rear support legs all hot-dip galvanized * Axles, springs, air tanks, and turntable painted black * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from week 21 / 2026

Condition: new, maximum load weight: 13,490 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, * TRA-Kombi 18.0: * TPMS (Tire Pressure Monitoring System), display option in the truck via EBS signal (no truck-side installation required) * EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 10.5-ton axles * Air suspension with manual lowering at the rear * Pneumatically lowerable towing bar, 2,100 mm long with 40 mm towing eye and height adjustment device * Powder-coated steel toolbox and spare wheel holder in basket design mounted on the right side * Reflective contour tape on sides and rear * Enclosed side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact bumpers * Foldable A-sign at the rear * LED tail lights * 15-pin power connector * Hot-dip galvanized main frame with raised outer rails to guide roller containers * Steel floor with recessed rollers in the bogie area * For roll-off container transport, container lengths from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking system and mechanically insertable stop brackets at the front in the track * Load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Eight removable skip stops for lateral centering, the front four are pinned with pendulum stops * Three pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and friction-locked securing of the skips, four cloverleaf lashing bars each side, and one pair of 13.4 t UVV lashing rings at the front * Load securing package with additionally four 8 t lashing eyes each side integrated into the outer frame * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 Hsdpowb Raksfx Af Ssfc * Weld bead as anti-slip coating in the ramp area * Mechanical drop supports at the rear * Aluminium approach ramps (10.6 t / pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) * --Permissible total weight technically possible: 20,000 kg-- * New vehicle without initial registration, with manufacturer’s warranty * Errors and prior sale excepted * Immediately available from Egestorf

Condition: new, maximum load weight: 31,630 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 9,250 mm, loading space width: 2,520 mm, * T 4: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle equalization front and rear * Tire pressure monitoring with display functionality in the truck via EBS signal (no truck-side installation required) * Warning sign packages front & rear * Reflective contour markings on the sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable LED beacon at rear * 24 V 15-pin power cable, additionally 12 V 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and infinitely adjustable height * Powder-coated steel toolbox and basket-type spare wheel holder mounted on the right side * Closed single plastic mudguard at the front * Straight rear steel spray suppression mudguards, including spray suppression * Side underrun protection * Extended offset bend, 500 mm forward * Turntable platform extension, 520 mm with 45° corners and 3 recessed, lockable storage compartments with lids * Chassis made of high-tensile fine-grain steel * Deck over turntable platform: 50 mm softwood, low-bed platform: 60 mm softwood * Outer boards of ramps: 50 mm bamboo * 4 stake pockets per side (stakes not included), double as 2 t lashing points * Load securing package includes: 2 lashing eyes (6.4 t) front left & right on main frame of turntable platform; 1 pair each side front & rear (13.4 t) lashing rings on outer frame; 4 pairs per side (10 t) swingable/drop-down multi-directional lashing rings inlet into outer frame; 2 pairs (6.4 t) on excavator arm support; 8 pairs galvanized folding widening brackets for up to 3 m overall width (not in rear slope) * Widening timbers stored in lateral compartment on left side * Excavator arm support above rear axle to end of drive-on slope approx. 2,300 x 740 x 190 mm * Mechanical rear drop-down support legs * Hydraulic, hot-dip galvanized ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp shift via sliding tube on ramp shaft * Deck above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loading height loaded: approx. 860 mm (including 860 mm drive-on slope) Hedpfx Afsrczm Dj Sefc * Chassis, turntable, ramps, rear mechanical drop-down supports are hot-dip galvanized * Axles, springs, air tanks, and turntable painted in black * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available from KW 21 / 2026

Condition: used, maximum load weight: 28,700 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 09/2013, next inspection (TÜV): 09/2026, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available on request. * Excavator bucket well, approx. 2,800 x 770 x 280 mm * 2-piece hydraulic ramps, approx. 2,100 x 2,100 x 700 mm, hydraulically adjustable * Hydraulic rear supports * Hydraulic lifting bed, approx. 4,020 mm long * Partial rubber coating on the loading area and ramps * Drive-over plate for ramps * Extendable loading area * Wabco Smartboard * Air suspension with lifting and lowering function * 2 work lights on the ramps * Hydraulic connections for the towing vehicle * 15-pin socket + ABS * 50 mm towing eye Hfodpfex Tx Elex Af Sec * BPW axles * Gooseneck with wooden cover * Storage box with lid integrated in the gooseneck

Condition: new, maximum load weight: 10,400 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * ETK-TA-R 14.4: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm with 40 mm flange drawbar eye ----Electrics / Lighting: * Tyre pressure monitoring with display option in the truck via EBS signal, no truck-side installation required * 15-pin power connector * LED tail lights ----General Attachments: * Mechanical support winch at front * 2 mechanical folding supports at rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Bolted underrun protection * Plastic quarter mudguards ----Frame: * Main frame made of fine-grain steel ----Tipping Platform: * Net hooks on the sides and rear at the central locking brackets as well as 2 hooks on the front wall * Steel pallet two-way tipper structure; fixed front wall made of smooth sheet, continuous drop sides (foldable without central stanchions, equipped with drop side spring keepers) and pendulum function via manual central locking * Removable rear stanchions (bolted) * Steel rear panel inserted in front of the ramps * Each corner equipped with 1 x 5 t lashing point plus 4 x 3 t lashing rings integrated in the outer frame on each side * 4 mm floor made of fine-grain steel Hodpfx Afstr Sucs Sjfc ----Ramps: * Two-part mechanical grating loading ramps with aluminium tip section, 2,150 + 1,300 mm x 600 mm (manually retractable to a total of 80 mm) ----Paintwork: * Chassis, drawbar, rear stanchions, underrun protection, mechanical supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, flange drawbar eye, and support winch painted in black tone * Drop sides and platform in RAL 9010 pure white * Painting of the side walls and tipping platform in a RAL color shade available at extra cost ----Notes: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 07/2026

Condition: new, maximum load weight: 10,400 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * ETK-TA-R 14.4: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-actuated cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar (range 300 mm) with 40 mm flange drawbar eye ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck via EBS signal, no truck-side installation required * 15-pin power connector * LED tail lights ----General Attachments: Hodpfjtr St Ujx Af Sofc * Mechanical landing gear at the front * Two mechanical folding supports at the rear * Plastic toolbox approximately 750 x 350 x 300 mm, mounted on the right side * Bolted underrun protection * Plastic quarter mudguards ----Frame: * Main frame made of high-tensile fine-grained steel ----Tipping Platform: * Mesh hooks on the sides and rear at the central locking mounts, plus 2 hooks on the front wall * 2-way steel pallet tipper body with fixed smooth sheet metal front wall, continuous drop sides – foldable without center posts with board lifting springs, and swinging via manual central locking * Rear posts bolted * Steel rear wall inserted in front of the ramps * Each corner with 1 x 5 t lashing point, and 4 x 3 t lashing rings embedded in the outer frame on each side * 4 mm floor made of high-tensile fine-grained steel ----Ramps: * Two-part mechanical mesh drive-up ramps with aluminum tip section, 2,150 + 1,300 mm x 600 mm (can be manually slid together to 80 mm) ----Paintwork: * Chassis, drawbar, rear posts, underrun protection, mechanical supports, and ramps hot-dip galvanized * Axles, springs, air tanks, flange drawbar eye, and landing gear painted in black * Sideboards and platform in RAL 9010 pure white * Paintwork of sidewalls and tipping platform in any RAL color available at extra cost ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available from week 07/2026

Condition: new, maximum load weight: 10,750 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: ----Brake system: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles Hsdov D Tcbjpfx Af Sofc ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange towing eye: * Drawbar height adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange towing eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin electrical connector * LED lighting ----General attachments: * Support winch at the front * External folding support legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted outside front right on the front wall * Side underride protection * Plastic quarter mudguards ----Low-loader deck: * 50 mm softwood flooring * Pre-fitted fixtures on the front wall and at the rear incline for subsequent installation of container locks for transporting 20" containers * Bolted front wall made from smooth sheet metal * Side walls made of folded steel sheet – trapezoidal profile – foldable, split once in the centre * Rear wall made of steel, can be slid in between the ramp holders, stowed inside in front of the front wall when not in use * Rear stanchions bolted ----Load securing: * Perforated outer frame bent to approx. 45 degrees with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible * 1 x 6.3 t lashing ring in each front and rear corner * Several holes in the front and rear cross members for 1.2 t lashing points ----Ramps: * One-piece mechanical mesh-access ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear approach angle approx. 860 mm chassis ----Wheelbase: * Wheelbase 1,140 mm ----Paint finish: * Drawbar, front wall, tailgate, folding supports and access ramps hot-dip galvanized * Axles, springs, air tanks, flange towing eye, and support winch painted in black * Side boards painted RAL 9010 pure white * Side walls can be painted in a RAL colour of your choice at extra cost ----Information: * Reinforced and certified body according to EN 12642 XL incl. load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately from Egestorf at the A7

Condition: new, maximum load weight: 10,750 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: ----Brake System: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Drawbar / Flange Eye: * Drawbar adjustable in height by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange towing eye ----Electrical / Lighting: * RDÜ tire pressure monitoring * 15-pin electrical connector Hodpfxsv Eq Evj Af Sefc * LED lighting ----General Attachments: * Landing gear front * External folding supports, rear * Plastic toolbox approx. 858 x 500 x 500 mm, front right on the front wall * Side underrun protection * Plastic quarter mudguards ----Low-loader Platform: * 50 mm softwood flooring * Preparation in front of the bulkhead and rear slope for subsequent installation of container locks for transporting 20" containers * Bolted front wall made of smooth sheet metal * Fold-down side walls made of trapezoidal steel sheet, split once in the middle * Removable steel rear wall, can be stowed inside at the front wall when not in use (between ramp holders) * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45 degrees angled, with 2 t lashing force every 480 mm * Option to install 3 t drop lashing brackets every 600 mm * 1 x 6.3 t lashing ring at each front and rear corner * Various holes in the front and rear crossbeam for 1.2 t lashing options ----Ramps: * One-piece mechanical grid ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Approach ramp at rear approx. 860 mm chassis ----Wheelbase: * Wheelbase 1,140 ----Paintwork: * Drawbar, front wall, tailgate, folding supports and ramps hot-dip galvanized * Axles, springs, air tanks, flange towing eye and landing gear painted black * Side boards painted RAL 9010 pure white * Side walls available in custom RAL color at extra charge ----Information: * Reinforced and certified body according to EN 12642 XL, including load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately from Egestorf on the A7

Condition: used, maximum load weight: 8,700 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 08/2014, Year of construction: 2014, Equipment: ABS, Internal vehicle no.: 001713 Location: Jaweed GmbH in Ober Mörlen (ZIP 61239), Hasselhecker Straße 30 * Tel.: Specification Sheet: ---- * Flatbed Trailer * Manufacturer: Müller-Mitteltal * Model: KA-TA-R11.9 * Year of manufacture: 08/2014 * Axles: 2 * Length: 7150 mm * Width: 2550 mm * Own weight: 3200 kg * Perm. total weight: 11900 kg * Payload: 8700 kg * Landing gear: Jost * Spare wheel included * Tires: 235 / 75R17.5 143J ---- * Our machine inventory is continuously changing and always up to date on our website. * We are offering over 200 items for sale. * Our location is 30 KM north of Frankfurt Airport (FRA). * We specialize in worldwide transport and shipping. * No liability for printing or typographical errors. * Our services: * Export declarations * Customs clearance * Temporary yellow number plates * Red customs number plates * Purchase of your used construction machines or commercial vehicles * Financing support available * Complete transport solutions * Vehicle and machine inspections: Hodpjx T I E Uofx Af Sefc * Mon-Fri from 08:00 to 16:30 * Saturdays by appointment only * You can also reach us by phone or WhatsApp for any questions ---- Jaweed GmbH Hasselhecker Straße 30 D-61239 Ober Mörlen Tel.: Mobile: This offer is non-binding and subject to prior sale. Sales always subject to our Terms and Conditions. Errors, omissions, and interim sales excepted. The details provided in advertisements (internet), price tags, and images are non-binding descriptions and do not constitute guaranteed properties. The seller assumes no liability for typing or data transmission errors. Listed equipment may need to be verified separately. No liability is accepted for hidden defects or prior damages not listed. Residual risk after vehicle disassembly. All details in advertisements are non-binding and without guarantee. The description is for general identification of the vehicle only and does not constitute a warranty in terms of sales law. ----