Low loader trailer

MÜLLER-MITTELTAL Tandem Tieflader- Tiefbett, 5,5 m - durchfahrbar

Condition: new, maximum load weight: 9,500 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,010 mm, loading space height: 250 mm, tire size: 235/75 r17,5, Equipment: ABS, trailer coupling, HUMBAUR 11.9 to tandem low-loader drive-through (wheels outside), Typ. HS 105020 BS --- INCLUDING galvanized grating on the access ramps at the rear --- HOT-DIP GALVANIZED CHASSIS/ DRAWBAR Equipment: * Permissible total weight 11,900 kg * Payload approx. 9,500 kg * Loading area approx. 5,000 x 2,010 mm Phsdskn N S Hspfx Ahzoa * Loading height unloaded approx. 700 mm * Overall dimensions: LxWxH approx. 7,160 x 2,550 x 3,000 mm * Drive-on ramps with galvanized grating, can be moved sideways (approx. 2,400 x 540 mm) with one gas strut lift per ramp * Infinitely height-adjustable drawbar for coupling heights of approx. 700 - 850 mm * Reinforced 12 t geared support winch with load and fast gear * 4 6 t lashing rings (recessed in the corners) * 12 2 t drop lashing hoops can be lowered into the outer frame * 2 telescopic folding supports at the rear of the vehicle * 2-circuit air brake system with ALB function * ABS braking system 24 volt * Spindle parking brake * Steel mudguards, hot-dip galvanized * Floor made of softwood planks * Chassis frame with drawbar hot-dip galvanized * 235/75 R17.5 tires * Maintenance-free parabolic suspension with load compensation * Electrical system: 15-pin 24 volt * Brake connection: 2 interchangeable coupling heads red/yellow ISO 1728 Your advantages: * Low loading and installation height * Optimum corrosion protection thanks to hot-dip galvanizing * Safe loading and unloading thanks to telescopic folding supports at the rear and the anti-slip grating ramp surface * Simple and easy handling of the steel access ramps thanks to the ramp lifters * Ideal load securing options thanks to standard lashing options * The infinitely height-adjustable drawbar enables compatibility with the different coupling heights of towing vehicles * Low tare weight => therefore high payload TOP! On request, we are happy to offer you a visible paint finish (front, side walls, mudguards and rear cross member) on the galvanized chassis in your corporate color, see example pictures. ∗Stock vehicle - available immediately ∗Subject to prior sale ∗Price ex works

Condition: used, machine/vehicle number: 816b3dfbfa1c7d49b7d052bd6, empty load weight: 2,500 kg, maximum load weight: 8,000 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 07/2022, tire size: 235/75 r17,5, Year of construction: 2022, Further information Chassis central axle trailer low bed Welded fine-grained steel construction, front gear support foot, telescopic rear support, wheel chocks with bracket, sheet steel mudguards over both wheels Towing device central axle trailer Drawbar with tested 40 mm towing eye, height-adjustable drawbar via spindle, max. adjustment range 250 mm Axles + suspension Euro axles of our choice, with angular roller bearings and S-cam brakes, laser-measured axle/chassis to reduce tire wear and fuel consumption, parabolic suspension with maintenance-free steel/rubber bearings and mechanical axle load compensation (rocker compensation) Brake system 2-line compressed air brake system, spring-loaded parking brake, 2 interchangeable coupling heads at the front, with connecting lines to the motor vehicle, ABS and ALB, with ABS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side, 2 white position lights at the front, 2 white/red lane departure warning lights at the rear, 1 x 15-pin plug at the front, with connecting cable, TTS bridge low-lying steel trough, bridge floor made of steel/checker plate covering, steel walls solidly welded to floor, bridge length 5500 mm, trough at front and sides with load-lock profile for tensioning strap attachment (8 pieces at front, 16 pieces on each side) Note: Slight floor undulation possible due to welding distortion! Phedpfx Aheqmc Raozsa Pair of lashing eyes, 1 x at the front in the corners of the steel tray and 1 x at the rear in the floor, 5 tons each. Pair of additional lashing eyes in the floor, 5 tons each Drive-on ramps Steel ramps 2 300 mm long, 510 mm wide, can be moved sideways, with handle on the ramps, covered with wood, with gas pressure jack for one-man operation Operating instructions The specified total weight is technically possible; depending on the load, the total weight may not be reached if the permissible axle/support and fifth-wheel loads are observed. (Poor driving and trailing behavior possible due to incorrect load distribution) Country of registration / plates Country of registration: Germany, with Dekra approval and expert opinion (in accordance with §13 EG - FGV), prepared for single-line license plate holder, contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear

Condition: new, empty load weight: 4,500 kg, maximum load weight: 14,500 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,459 mm, loading space height: 860 mm, suspension: air, tire size: 235/75r17,5, color: silver, Year of construction: 2023, Equipment: ABS, tail-lift, uploader, HBTZ 197224 Air-suspended lifting and lowering Hot-dip galvanized Loading height: approx. 870 mm, Psdpfx Aelzigtohzsha Drawbar length approx. 1800 mm, coupling height approx. 745-1010mm, Drive-on angle: approx. 13°, Screed length: approx. 3100 mm, plank width: approx. 760 mm, Floor covering made of 40 mm softwood planks, 4 lashing eyes per side, 10,000 kg per lashing point recessed in the bridge floor, 8 pairs of lashing rings in the outer frame - 2000 kg per lashing point, Drawbar eye 50 mm, galvanized, reinforced height adjustment infinitely variable, loading area sloping at the rear, front wall 400 mm galvanized steel, pluggable, Aluminium drop sides 400 mm, foldable and removable, galvanized corner stanchions, pluggable and removable, 2 folding supports at the rear, telescopic, support winch, spring-loaded parking brake, 2 folding steel ramps can be moved sideways, galvanized, ramp jack: 1 x gas pressure spring per ramp, ramp decking made of 50 mm softwood planks, ramp safety device with turnbuckle, galvanized steel mudguards, folding side approach gate, EBS, LED side marker reflector lights, air suspension, lift axle,

Condition: used, empty load weight: 2,380 kg, maximum load weight: 8,320 kg, overall weight: 10,700 kg, axle configuration: 2 axles, first registration: 04/2016, next inspection (TÜV): 06/2026, loading space length: 5,030 mm, loading space width: 2,010 mm, loading space height: 325 mm, suspension: steel, tire size: 235/75R17.5, color: silver, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, BPW axles, tandem, leaf suspension, ABS (anti-lock braking system), lashing eyes, mechanical ramps, front support, rear support, side aluminium underrun protection, tool box, height-adjustable drawbar. Body: tandem low-bed trailer with mechanical loading ramps, galvanized access ramps, 2x BPW axle, drum brakes! Loading height approx. 700 mm! Ramp length approx. 2200 mm! Phjdpfoxqhltjx Ahzja ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors!