Three-way tipper trailer

MÜLLER-MITTELTAL 11,9 to Tand. 3-Seitenkp./ Kombiklappe/ Rampen

Condition: new, maximum load weight: 8,850 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2024, * KA-TA-R 11.9 "Masterline": * Hot-dip galvanized floor and bulkhead * EBS braking system * Emergency release device for spring-loaded cylinders * Tire pressure monitoring system * Drum brakes * 2 x 5.5 ton BPW axles * Parabolic springs with tandem compensating unit * 300 mm height-adjustable drawbar with 40 mm flange drawbar eye * Jost mechanical landing gear at the front * 2 mechanical landing gears at the rear Hot-dip galvanized folding supports * Plastic toolbox approx. 750 x 350 x 300 mm on the right side * 15-pin power connector * LED lighting * Bolted underride protection * Plastic quarter fender Fedpel Thymjfx Afmsgi * Net hooks on the sides and rear in the central locking bearings, as well as two on the front wall * Steel pallet 3-way tipping body (continuous side walls - without center stanchions - foldable with side wall spring lifter) * Bolted rear stanchions * Combination steel wing doors, rear wall with two asymmetrical wings, divided by 270°, pivoting and locking, not foldable, and with additional pendulum frames for automatic rear wall opening during tipping. Locking via galvanized espagnolette and central locking * Deactivation function for automatic rear wall function when tipping backwards with the wing door open * 1 x 5 ton lashing ring in each corner and on the sides 4 x 3-ton lashing eyes embedded in the outer frame, 4 mm sheet steel floor, rear mounting rail for the landing ramps * Reinforced body with load securing certificate according to EN 12642 XL * 1 pair of aluminum landing ramps approx. 3,310 x 400 mm (load capacity 8 tons per pair) suitable for rubber-tired and tracked vehicles * Rear-lockable storage compartment embedded in the chassis below the loading area * Front wall, tipping platform, rear stanchions, underrun protection, mechanical Hot-dip galvanized drop legs * Side walls and tailgate painted in RAL 9010 pure white * Side walls can be painted in a RAL color for an additional charge * Axles, springs, flanged towing eye, air chamber, and landing gear painted in a black color * New vehicle, not registered, with manufacturer's warranty * Errors and prior sale subject to change * Available for immediate delivery from Egestorf on the A7

Condition: new, maximum load weight: 8,670 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2025, * KA-TA-R 11.9 Masterline: * Floor and front wall hot-dip galvanized * Wabco EBS * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring brake cylinder * Drum brakes * 2 x 5.5 t BPW axles * Parabolic springs with tandem compensating aggregate * Hot-dip galvanized drawbar with 40 mm flange towing eye, height-adjustable by 300 mm * Jost mechanical landing gear at the front * 2 rear mechanical hot-dip galvanized folding supports * Tool box made of galvanized sheet steel on right side * 15-pin power connector * Bolted underrun protection * LED lighting * Plastic quarter mudguards * Net hooks on sides and at rear in the central locking mounts, plus 3 external on the front wall * Hot-dip galvanized chassis * Steel PAL 3-way tipper body Fgsdpoq Hg Dxofx Afmji * Continuous drop sides without central stanchion, foldable with sideboard spring assist * Rear wall foldable and swinging via manual central locking * Hot-dip galvanized bolted rear stanchion * In each corner: 1 recessed and foldable lashing ring (5 t), plus 4 foldable lashing rings (3 t each) on the side outer frame * 4 mm steel floor plate * Rear receptacle rail for loading ramps * Body reinforced with cargo securing certificate according to EN 12642 XL * 1 pair aluminum loading ramps approx. 3,310 x 400 mm (capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment at rear under load area, integrated into chassis * Tires: 235/75 R 17.5 * Axles, springs, air reservoir, drawbar, and landing gear painted in a shade of black * Sideboards painted in RAL 9010 pure white * Sidewalls can be painted in any RAL color at additional cost * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available from week 49/2025

Condition: used, empty load weight: 4,600 kg, maximum load weight: 13,400 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2010, loading space length: 4,800 mm, loading space width: 2,320 mm, loading space height: 850 mm, total length: 2,500 mm, total width: 2,600 mm, suspension: air, tire size: 385/65R22.5, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel body, Bordmatik on the left, 2 axles, BPW axles, tandem, air suspension, ABS (anti-lock braking system), flap, underrun protection, front support, Jet side walls Body: Tandem tipper trailer with Bordmatik on the left, 2x 9t BPW axles, drum brakes! Fedpjxflkcjfx Afmsgi Loading height approx. 1540 mm! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: new, maximum load weight: 8,600 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2025, * KA-TA-R 11.9 Masterline: * Floor and front wall hot-dip galvanized * Wabco EBS * Emergency release device for spring brake cylinders * RDÜ tire pressure monitoring system * Drum brakes * 2 x 5.5 t BPW axles * Parabolic springs with tandem equalizer unit * 300 mm height-adjustable hot-dip galvanized drawbar with 40 mm flange towing eye * Jost mechanical landing gear at front * Rear: 2 mechanical, hot-dip galvanized folding supports * Galvanized steel toolbox mounted on right side * 15-pole electrical connector * Bolted underrun protection * LED lighting * Plastic quarter mudguards * Net hooks on the sides and rear in the locks of the central locking system, plus 3 on the outside of the front wall * Hot-dip galvanized chassis * Steel pallet 3-way tipper body * Continuous drop-down side walls without central stanchion, with drop-side lifting assistance * Drop-down rear tailgate, can also be used as pendulum tailgate via manual central locking * Hot-dip galvanized, bolted rear stanchion * In each corner: 1 x 5 t recessed, foldable lashing ring; plus 4 x 3 t recessed, foldable lashing rings on each side frame * 4 mm steel plate flooring * Rear mounting rail for loading ramps * Body reinforced with load-securing certificate according to EN 12642 XL * 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tyred and tracked vehicles * Rear lockable storage compartment recessed in chassis under loading platform * Tires: 235/75 R 17.5 * Axles, springs, air tanks, drawbar, and landing gear painted in black * Drop-side paint finish in RAL 9010 pure white * Side wall painting in a custom RAL color available at extra charge * New vehicle with manufacturer's warranty * Errors and prior sale reserved * Available from calendar week 49/2025 Fgsdpfsv Dz N Ajx Afmoi