Used Müller-Mitteltal Pt Trailers for sale (260)

Condition: new, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA 18.0: * 2-in-1: Suitable for roll-off containers and as a low-loader ----Brakes: * EBS electronic braking system * Emergency release device for spring brake cylinders Lhsdpfx Agjl Tq Nmeqjl * Drum brakes ----Axles: * 2 x 10-ton Gigant axles ----Suspension: * Air suspension with lifting and lowering system and RTR valve ----Drawbar: * Drawbar 2,000 mm long with 40 mm drawbar eye and height adjustment ----Electrical system / Lighting: * Tire pressure monitoring system with display option in the truck via EBS signal - without truck-side installation * LED tail lights 12 / 24 V * 15-pole power connector ----General attachments: * Toolbox made of powder-coated sheet steel, approx. 1,000 x 300 x 600 mm * Storage box for container net made of galvanized sheet metal, 960 x 300 x 450/400 mm * Reflective contour strip on the sides and rear * Side underrun protection * Plastic quarter fenders with splash guards * Plastic rear impact protection buffer * Foldable A-frame sign at the rear ----Loading platform: * Main frame with raised outer frames to guide the roll-off containers * Steel sheet floor with recesses for the rollers in the bogie area * Container length of 5,500 - 7,000 mm possible * Pneumatic 4-point clamping lock and mechanical plug-in stop angles at the front in the track, load securing certificate according to DIN 30722 - 1 * Welded bead as an anti-slip surface in the track area of the ramp * Mechanical rear support legs ----Load securing: * 1 pair of 10-ton UVV lashing rings at the front on the end wall beam * 3 pairs of 10-ton UVV lashing rings on the sides in the outer frame * 4 x 2-ton lashing eyes each on the sides in a cloverleaf design * 4 x 8-ton lashing brackets embedded in the outer frame ----Ramps: * 1 pair of aluminum loading ramps (10.6 tons / pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment from the rear) ----Painting: * Chassis, bogie, locking parts, rear support legs hot-dip galvanized * but the drawbar, axles, and air tank are painted in a black tone ----Information: * New vehicle without initial registration with full manufacturer's warranty * Subject to errors and prior sale * Sample images ----Delivery time: * Available approximately from week 43 / 2026

Condition: used, maximum load weight: 8,750 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 06/2024, total width: 2,550 mm, Year of construction: 2023, Müller Mitteltal KA-TA-R 11.9 tandem 3-way tipper with lots of extras. Total weight: 11,900kg Standard payload approx.: 8,750kg Clear dimensions: 5,000x2,420x500mm Tires: 385/55R19.5 4-layer paintwork, single color Wheels: silver Chassis/underbody protection: hot-dip galvanized Platform with bulkhead: hot-dip galvanized Axles/springs/fuel tank etc.: black Side and rear wall: RAL 2011 deep orange Reinforced and certified structure in accordance with EN 12642 XL including load securing certificate. (Only in conjunction with 500mm high steel side walls). Rear stanchions screwed, hot-dip galvanized, without top coat. Lashing points LC 5,000 daN recessed at the front. Net hooks integrated at the side and rear in the bearings of the central locking system to the base side wall and 2 additional pieces on the front wall. BPW axles instead of GIANT tipping platform with permanently attached front wall in hot-dip galvanized design, with screwed, galvanized rear stanchions, without additional coating (not with HARDOX floor). Due to the system, the formation of waves during hot-dip galvanization, especially with the large floor panel, cannot be ruled out; complaints in this regard are excluded from the warranty. Tires 385/55R19.5 instead of 235/75R17.5 (floor and coupling height + approx. 110 mm, Code 08.940 ramp length 3,570 mm required). 1 plastic tool box, black, lockable, W=750xH=350xD=300mm (45kg payload with even load), arrangement: on the chassis frame on the right in the direction of travel. 1 pair of aluminum docking ramps without fairway (8 t/pair), 3,570x400x105mm, suitable for rubber-tired and tracked vehicles, 55 kg/each. Two-step access in front of the front wall, on the left in the direction of travel (hot-dip galvanized). Extended connecting lines for agricultural and forestry tractors. Ljdpfszwa Imsx Agqjhl Further information New: No

Condition: used, empty load weight: 2,910 kg, maximum load weight: 7,590 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 09/2009, next inspection (TÜV): 04/2025, loading space length: 4,500 mm, loading space width: 2,200 mm, loading space height: 450 mm, suspension: steel, tire size: 235/75R17.5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel body, 2 axles, BPW axles, tandem, leaf spring suspension, ABS (anti-lock braking system), lashing eyes, underbody protection, front support, rear support, swing flaps. Construction: Tandem 3-way tipping trailer with ramp shaft. Loading ramps available for an additional charge of €900.00 net! ACCESSORIES INFORMATION IS PROVIDED WITHOUT GUARANTEE. Subject to changes, prior sale, and errors! Lhodpfov S H Sfsx Agqjl - .

Condition: used, empty load weight: 3,100 kg, maximum load weight: 7,400 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 10/2004, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 400 mm, suspension: steel, tire size: 235/75R17.5, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel body, 2 axles, BPW axles, tandem, leaf spring suspension, ABS (anti-lock braking system), lashing eyes, underride guard, front supports, rear supports, storage box, swing-open tailgates, drawbar with adjustable height. Body: Tandem 3-sided tipper trailer with loading ramps, 2x BPW axles, drum brakes! Loading ramps available for an additional charge of €990.00 net! Loading height approx. 900mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors! Ledpfxeztrw Ss Agqohl

Condition: used, overall weight: 13,500 kg, axle configuration: 2 axles, first registration: 02/2018, loading space length: 5,060 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2018, MUELLER MITTELTAL Anhänger ( KIPPER ) 5,06 m Imported / Accident-FREE IN VERY GOOD CONDITION! ? YEAR OF PRODUCTION: 2018 AIRSUSPENSION TIRE SIZE: 385/55R19,5 WHEELBASE: 115 PLATFORM: 506 x 242 x 50 m TOTAL WEIGHT: 13 500 kg CAPACITY: 10 000 kg TEL: KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? Lhsdpsy E Ecnjfx Agqol LASZLO - MAGYAR COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ?????

Condition: new, maximum load weight: 9,130 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,010 mm, loading space height: 325 mm, Year of construction: 2026, * ETS-TA-B 11.9: * Wabco EBS (electronic braking system) * TPMS (tire pressure monitoring system) * Drum brakes, 2 x 5.5 t Gigant axles * Parabolic springs with compensating unit * Height-adjustable drawbar, approx. 300 mm * BPW landing gear * Mechanical drop supports at the rear * Plastic toolbox at the front right on the bulkhead * Side underrun protection * LED lighting * 50 mm softwood floor * One 6.3 t lashing point in the corners at the front bulkhead and rear end member, plus two 6.3 t UVV-compliant lashing rings recessed in the outer frame on each side * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,350 x 870 mm (20 mm inner spacing, ramps fixed and not movable) * Bulkhead, side walls, mudguards, and drawbar hot-dip galvanized * Axles, springs, air reservoir, and front landing gear painted in black Ljdewyhzvopfx Agqjhl * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Available immediately from Egestorf

Condition: new, maximum load weight: 9,130 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,010 mm, loading space height: 325 mm, Year of construction: 2026, * ETS-TA-B 11.9: * Wabco EBS (electronic braking system) * TPMS (tire pressure monitoring system) * Drum brakes, 2 x 5.5 t Gigant axles * Parabolic springs with compensating unit * Height-adjustable drawbar, approx. 300 mm * BPW landing gear * Mechanical drop supports at the rear * Plastic toolbox at the front right on the bulkhead * Side underrun protection * LED lighting * 50 mm softwood floor * One 6.3 t lashing point in the corners at the front bulkhead and rear end member, plus two 6.3 t UVV-compliant lashing rings recessed in the outer frame on each side * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,350 x 870 mm (20 mm inner spacing, ramps fixed and not movable) * Bulkhead, side walls, mudguards, and drawbar hot-dip galvanized * Axles, springs, air reservoir, and front landing gear painted in black Lhjdpjwyhzpefx Agqel * New vehicle with full manufacturer's warranty * Subject to errors and prior sale * Available immediately from Egestorf

Condition: used, empty load weight: 3,290 kg, maximum load weight: 8,610 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 07/2019, next inspection (TÜV): 05/2027, loading space length: 7,100 mm, loading space width: 2,500 mm, loading space height: 1 mm, suspension: steel, tire size: 235/75R17.5, color: silver, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, tandem axle, leaf spring suspension, ABS (anti-lock braking system), lashing eyes, mechanical ramps, front support, rear support, side aluminum fender, adjustable drawbar. Lhedpfx Agjy Ui Itoqol Superstructure: Tandem low-bed trailer with mechanical ramps and wooden floor. Loading height approx. 920mm, 2 x Gigant axles, drum brakes, frame and ramps galvanized! Currently derated to 10,000 kg (payload 7,610 kg), 40 mm drawbar eye. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: new, maximum load weight: 10,760 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders ----Axles: * 2 x 7-ton Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange coupling: * Drawbar adjustable in height by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange coupling ----Lighting / Electrical system: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General components: * Jost front support jacks * External, hot-dip galvanized folding support legs at the rear * Plastic toolbox on the front right side, attached to the front wall * Side impact protection * Plastic quarter fenders ----Low-bed platform: * 50 mm softwood flooring * Provision in front of the front wall for subsequent installation of container locking devices * Bolted front wall made of smooth sheet metal * Steel side walls - trapezoid profile - foldable with side board spring lifts * Steel rear wall can be slid in between the ramps - bracket for storage when not in use, inside the front wall * Rear crossmembers bolted ----Load securing: * Perforated outer frame, angled at approximately 45 degrees, with 2-ton lashing force every 480 mm * Installation of 3-ton eye lashing brackets every 600 mm possible Lhodpfx Agsq Dyvvjqel * At the front and rear corners, 1 x 6.3-ton lashing point each * Various holes in the front and end beams for 1.2-ton lashing options * Profifix lashing rail in the center of the longitudinal axis for lashing options up to LC 3000 daN ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approximately 2,750 x 600 mm (can be slid together to 20 mm) * Approach angle at the rear, approximately 860 mm ----Painting: * Hot-dip galvanized chassis, drawbar, front wall, ramps, and rear wall * Side board color in RAL 9010 pure white * Painting of the side walls in a RAL color possible for an extra charge ----Information: * Reinforced and certified body according to EN 12642 XL including load securing certificate * New vehicle with manufacturer's warranty * Errors and prior sale reserved ----Delivery time: * Immediately available from Egestorf

Condition: used, maximum load weight: 38,230 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 06/2026, loading space length: 8,500 mm, loading space width: 2,520 mm, Müller-Mitteltal Low-loader with Wheel Recesses TS 3 RM ML 30.0, 2 Loading Heights and Ramps * Fifth wheel load increase from 12 t to 18 t incl. Kingpin mounted in: Second kingpin position 2", kingpin up to and incl. 5th wheel height 2,750 mm. Rear turning radius approx. 2,400 mm in clear width (a minimum clearance of 150 mm is recommended). Forward turning radius 1,480 mm or 1,570 mm with spare wheel. Note: Sufficient clearance to the towing vehicle must be ensured by the customer. * Extension parts for the wheel recesses at the front and bottom at the rear (205 mm deep). 6 pieces incl. insertion boards for wheel recesses at the rear. Board holder as receiving shafts according to code 09.112. Aluminum compressed air tank instead of steel. * Smartboard control box mounted on the trailer as an information tool with pressure sensors incl., exclusively for overall axle load display. Display option can be selected via the control box or in the truck via the EBS air suspension system (truck manufacturer-dependent). Ledpsy R Ipusfx Agqehl * ?SP-Combination Package: Tool box with 45° corners made of galvanized sheet steel, additionally powder-coated in RAL 9006 white aluminum, on the fifth wheel platform, W=2,480 x H=500 mm with a folding lid on top, side doors and sloping corners. Incl. aluminum side walls that can be folded down to the fifth wheel platform (500 mm high), aluminum rear wall plugged in (150 mm high), aluminum side panels painted inside and out in RAL 9006 white aluminum. Incl. rear uprights, foldable and detachable, galvanized (without topcoat). Incl. bolted front structure. Length of front cross member to 5th wheel height 3,935 mm. Forward turning radius, without spare wheel, at 5th wheel height 2,450 mm or 2,750 mm, approx. 1,750 mm or approx. 1,480 mm. * 2 container locking mechanisms recessed into the front cross member. * 3 receiving shafts under the fifth wheel platform for storing optional aluminum ramps or wooden planks for covering the wheel recesses. * Folding/extendable outrigger (galvanized) and wooden planks for widening incl. (not on the rear slope), plank holder on the fifth wheel platform (the track width of the load may be a maximum of 2,500 mm). * Second LED position light on the warning package at the front and rear (double lighting), only in combination with the warning package. * 2 LED reversing lights on the rear of the trailer, switched with reverse gear (suitable for 12 V and 24 V), max. 2 additional lights in total. * 7-pole socket on the rear, wired for overhang lighting with tail light (58 R) and ground. * Rubber mat on the loading ramp on the left and right (approx. 860 mm long) 190 07644 rubber strip, on the inner plank of the one-piece ramps. * Central lubrication system fully automatic with pump (24 V), grease tank and integrated trailer control, without connection to the ramps (in the case of steering: incl. connection of the distributor of the fifth wheel platform). Note: Only possible with towing vehicles with a 24 V lighting system! Intermediate sale and errors are expressly reserved! Sale exclusively subject to our general terms and conditions (AGB). Important note - Important information: Despite careful checking of all details in our offer, errors may occur. Some of these are caused by transmission errors in the systems of the various platform providers. Therefore, we would like to point out that all information is provided without guarantee and does not c

Condition: used, first registration: 06/2010, loading space length: 11,350 mm, loading space width: 2,500 mm, loading space height: 950 mm, - Steered axle - Remote control - Hydraulic ramps - Upper loading platform 3500 mm - Lower loading platform 7850 mm Lhsdpfx Agox Dzn Usqol

Condition: used, maximum load weight: 8,850 kg, overall weight: 11,990 kg, axle configuration: 2 axles, first registration: 10/2018, Year of construction: 2018, Equipment: ABS, Trailer in good condition. Ledpfx Agozxvi Njqohl The technical inspection certificate has expired; a new one can be obtained for an additional fee upon request.

Condition: used, maximum load weight: 31,000 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 07/2024, loading space length: 9,290 mm, loading space width: 2,520 mm, loading space height: 950 mm, * PT 40.0 Profi ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 4 x 11-ton Gigant axles ----Suspension: * Air suspension with lifting and lowering system and rapid drop valve ----Drawbar: * Drawbar with 50 mm drawbar eye and height adjustment ----Lighting / Electrical: * EBS multi-voltage system with 12 & 24 V electrical system * 15-pole power connector * LED lighting system 12 / 24 V * LED rotating beacon (removable) at the rear * 2 LED reversing lights (switched via reverse gear) ----General attachments: * Manometer - pressure gauge for load weight determination (axles separated into 2 air suspension circuits) * Lateral impact guard * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front plastic quarter fenders with splash protection * Rear straight, galvanized steel splash guards with splash protection * Reflective contour strips on the sides and at the rear * Tool box made of galvanized steel sheet, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high ----Low-bed platform: * Extension in front of the turntable platform, approx. 490 mm long with 45° corners * ROBOTER welded anti-slip surface on the steel plate of the turntable platform * Hardwood flooring on the running surfaces of the low-bed platform ----Load securing (La-Si-package consisting of): * 1 x 13.4-ton UVV lashing eye on each side in front of the front bulkhead support * 4 holes on each side in the turntable platform, each with a lashing force of 2 tons * 1 pair of lashing eyes (13.4 tons) hanging at the rear on the left and right in front of the rear crossbeam * 4 pairs of UVV lashing rings (10 tons) on each side, swiveling and lowerable, loadable in all directions and recessed in the outer frame Ledpfx Agel Tlhrjqshl * 3 rung pockets on each side with simultaneous 2-ton lashing option ----Widening package: * Hot-dip galvanized mechanical folding outriggers for 3 m overall width (but not in the rear slope) * Beam holder for widening extensions under the chassis on the left in the longitudinal direction ----Excavator arm rest: * Excavator arm rest above the rear axle up to the end crossbeam, approx. 2,100 mm long and approx. 190 mm deep * 2 pairs of 6.4-ton lashing eyes on each side in the excavator arm rest ----Ramps: * Hydraulic, one-piece ramps (approx. 3,000 x 720 mm) mechanically adjustable on the sides * Outer beams of the ramps made of hardwood * Steel construction as preparation for a 6-way control valve ----Loading height: * Loading edge unladen approx. 950 mm +/- 20 mm ----Tires: * Tires 235/75 R 17.5 ----Paint: * Chassis, turntable, folding outriggers, mechanical support legs, ramps hot-dip galvanized * --Axles, air tanks, drawbar painted in a black tone-- ----Info: * Vehicle has a temporary registration in 07/2024, due to a missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Errors and prior sale are subject to change ----Delivery time: * Immediately available from Egestorf

Condition: used, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2026, next inspection (TÜV): 03/2027, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA 18.0: * 2 in 1 = suitable for roll-off containers and as a low-loader ----Brakes: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10-ton Gigant axles ----Suspension: * Air suspension with lifting and lowering system and RTR valve ----Drawbar: Ljdpszihcpefx Agqehl * Curved drawbar 2,000 mm long with pivoting drawbar eye 40 / 50 mm (without 8° eye) * GHD height adjustment device instead of drawbar spring ----Electrical System / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal - without truck-side installation - * LED tail lights 12 / 24 V * 15-pole power socket ----General Components: * Toolbox made of powder-coated steel sheet approx. 1,000 x 300 x 600 mm * Spare wheel holder on the right side * Reflective contour strip on the side and rear * Side impact protection * Plastic quarter fenders with splash guard * Plastic impact protection buffer at the rear * Folding A-frame sign at the rear ----Loading Platform: * Main frame with raised outer frames to guide the roll-off containers * Steel sheet floor with recesses for rollers in the bogie area * Continuous length of 5,500 - 7,000 mm possible * Pneumatic 4-point clamp locking system and mech. plug-in stop angles at the front in the track, load securing certificate according to DIN 30722 - 1 * Welded bead as anti-slip surface in the track area of the ramp * Mech. rear support legs ----Load Securing: * 1 pair of 10-ton UVV lashing rings at the front on the end wall cross member * 3 pairs of 10-ton UVV lashing rings on the side in the outer frame * 4 x 2-ton lashing eyes in cloverleaf design on each side * 4 x 8-ton lashing brackets recessed in the outer frame ----Ramps: * 1 pair of aluminum loading ramps (10.6 tons / pair) 2,800 x 470 mm suitable for rubber-tired and tracked vehicles (lockable storage compartment from the rear) ----Painting: * Chassis, bogie, locking parts, rear support legs hot-dip galvanized * but the drawbar, axles, air tank painted in a black tone ----Information: * Vehicle has full manufacturer warranty until 03.2027 * Errors and prior sale excepted * The trailer is in new condition and has only been used a maximum of 5 times ----Delivery Time: * Available for immediate delivery from Egestorf on the A7

Condition: used, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 03/2026, next inspection (TÜV): 03/2027, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA 18.0: * 2 in 1 = for roll-off containers and as a low-bed trailer ----Brakes: * EBS electronic braking system * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 2 x 10-ton Gigant axles ----Suspension: * Air suspension with lifting and lowering system and RTR valve ----Drawbar: * Curved drawbar, 2,000 mm long, with pivoting drawbar eye 40 / 50 mm (without 8° eye) Lhjdpfx Agszihcieqel * GHD height adjustment system instead of drawbar spring ----Electrical system / Lighting: * Tire pressure monitoring with display option in the truck via EBS signal - without truck-side installation - * LED tail lights 12 / 24 V * 15-pole power socket ----General components: * Toolbox made of powder-coated sheet steel, approx. 1,000 x 300 x 600 mm * Spare wheel holder on the right side * Reflective contour marking on the sides and rear * Side impact protection * Plastic quarter fender with splash guard * Plastic impact protection buffer at the rear * Foldable A-frame sign at the rear ----Loading area: * Main frame with raised outer frame for guiding the roll-off containers * Sheet steel floor with recesses for the rollers in the bogie area * Continuous length of 5,500 - 7,000 mm possible * Pneumatic 4-point clamping locking system and mechanical plug-in stop angles at the front in the track, load securing certificate according to DIN 30722 - 1 * Welded bead as anti-slip coating in the track area of the ramp * Mechanical support legs at the rear ----Load securing: * 1 pair of 10-ton UVV lashing rings at the front on the end wall support * 3 pairs of 10-ton UVV lashing rings on the sides in the outer frame * 4 x 2-ton lashing eyes in cloverleaf design on each side * 4 x 8-ton lashing brackets embedded in the outer frame ----Ramps: * 1 pair of aluminum loading ramps (10.6 tons / pair) 2,800 x 470 mm, suitable for vehicles with rubber tires and tracked vehicles (lockable storage compartment from the rear) ----Painting: * Chassis, bogie, locking parts, rear support legs hot-dip galvanized * but the drawbar, axles and air tank are painted in a black tone ----Information: * Vehicle has full manufacturer's warranty until 03/2027 * Errors and prior sale are subject to change * The trailer is in new condition and has only been used a maximum of 5 times ----Delivery time: * Available for immediate delivery from Egestorf near the A7

Condition: used, empty load weight: 3,650 kg, maximum load weight: 10,750 kg, overall weight: 14,400 kg, axle configuration: 2 axles, first registration: 07/2011, loading space length: 5,000 mm, loading space width: 2,430 mm, loading space height: 900 mm, suspension: air, tire size: 285/70R19.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 2 axles, tandem axle, air suspension, ABS (anti-lock braking system), tailgate, lashing eyes, side guards, front supports, rear supports, swing-out tailgates, adjustable drawbar. Ljdpfszr H Ngsx Agqjhl Body: Tandem 3-sided tipper trailer with aluminum side walls, 2x Gigant axles, drum brakes! Loading ramps available for an additional charge of €990.00 net! ACCESSORY INFORMATION IS WITHOUT GUARANTEE; subject to changes, prior sale and errors!

Condition: new, empty load weight: 11,660 kg, maximum load weight: 38,340 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, loading space length: 9,790 mm, loading space width: 2,550 mm, loading space height: 900 mm, suspension: air, tire size: 235/75R17.5, color: red, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: en route / in transit, 5 axles, BPW axles, turntable, air suspension, last axle with trailing steering, ABS (anti-lock braking system), lashing points, mechanical ramps, rear supports, side aluminum fender, twin tires. Lhedpfjz Db A Ajx Agqol Superstructure: 5-axle low-bed trailer with mechanical access ramps, galvanized, 5x 10t BPW axles, drum brakes, 3rd axle can be lifted, 5th axle with trailing steering! All information is provided without guarantee, as the trailer is currently en route! ACCESSORY INFORMATION IS PROVIDED WITHOUT GUARANTEE; subject to change, prior sale and errors.

Condition: new, maximum load weight: 13,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA-Kombi 18.0: * 3-in-1 = for skip, roll-off containers, and as a low loader ----Brake System: * RDÜ Tire Pressure Monitoring System * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm towing eye and adjustable height mechanism ----Electrics / Lighting: * LED tail lights * 15-pin electrical connector * RDÜ (tire pressure monitoring), indication possible in the truck via EBS signal (no vehicle-side installation required) ----General Attachments: * Toolbox made of powder-coated sheet steel, mounted on the right side * Side underrun protection Lhedpfx Ael Thwcsgqjl * Plastic quarter mudguards with spray protection * Storage box for container nets made of galvanized sheet metal, approx. 960 x 300 x 400 / 450 mm, right side * Rear plastic bumper pads * Mechanical drop-down supports at the rear ----Loading Area: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roll containers * Steel floor with recessed rollers in the bogie area * For roll-off container transport, container lengths from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking system and mechanical removable front guide blocks in the track, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * 8 repositionable skip stoppers for lateral centering of skips, front 4 stoppers inserted with pivoting stop * Weld bead as anti-slip coating in the approach ramp area ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning devices for friction-locked and form-fit securing of skips * 4 cloverleaf-type lashing brackets on each side * 1 pair of 13.4 t UVV lashing rings at the front ----Ramps: * 1 pair of aluminum approach ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Info: * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Permissible gross weight technically up to 20,000 kg * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. calendar week 44 / 2026

Condition: new, maximum load weight: 13,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA-Kombi 18.0: * 3 in 1 – suitable for roll-off containers, skip containers, and as a low loader ---- Brakes: * TPMS (Tire Pressure Monitoring System) * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders ---- Axles: * 2 x 12 t Gigant axles ---- Suspension: * Parabolic springs ---- Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm drawbar eye with height adjustment ---- Electrics / Lighting: * LED tail lights * 15-pin power connector * TPMS (Tire Pressure Monitoring System), display option in the truck via EBS signal (no truck-side installation required) ---- General Attachments: * Toolbox made from powder-coated sheet steel, right side * Side underrun protection * Plastic quarter mudguards with spray protection * Storage box for container nets, galvanized sheet, approx. 960 x 300 x 400/450 mm on right side * Plastic impact protection buffer at the rear * Mechanical drop supports at the rear ---- Loading Area: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) for guiding roll containers * Steel floor with roller recesses in the bogie area * Suitable for roll-off containers with a container length of 5,500 - 7,000 mm * Pneumatic 4-point clamp lock as well as mechanically pluggable front stops in the rail, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum capacity of 10 m³ possible * Includes 8 repositionable skip centering stops for lateral centering, front 4 stops are plug-in with pendulum stop * Weld bead as anti-slip coating in the ramp pathway area ---- Load Securing: * 3 pairs of 10 t UVV lashing rings, side-mounted for attaching tensioning elements, for positive and friction-locked securing of skips * 4 lashing rails per side in cloverleaf design * 1 pair of 13.4 t UVV lashing rings at the front ---- Ramps: * 1 pair of aluminum approach ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment at rear) ---- Info: * Load securing certificates according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Technically permissible gross weight: 20,000 kg * New vehicle with manufacturer's warranty Lhodpfx Agol Thv Rjqsl * Subject to errors and prior sale ---- Delivery time: * Available from approx. week 44 / 2026

Condition: used, empty load weight: 3,110 kg, maximum load weight: 9,490 kg, overall weight: 12,600 kg, axle configuration: 2 axles, first registration: 05/2016, loading space length: 4,550 mm, loading space width: 2,380 mm, loading space height: 600 mm, suspension: steel, tire size: 285/70R19.5, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel superstructure, 2 axles, turntable, leaf spring suspension, ABS (anti-lock braking system), lashing eyes, storage box, drop-down side panels. Lhsdpfx Agswth Iioqol Superstructure: 2-axle, 3-sided tipper trailer, Gigant axles, drum brakes, frame hot-dip galvanized, automatic tailgate opening, 12 & 24V lighting! Loading height approx. 1290mm! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: new, maximum load weight: 10,950 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TA-ER 14.4 Platform Trailer: ----Brakes: * EBS (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 2 x 7-ton BPW axles ----Suspension: * Air suspension with lifting and lowering system ----Drawbar / Flange Coupling: * Drawbar adjustable in height by 300 mm * Drawbar shortened by approx. 200 mm to approx. 1,800 mm (resulting in a wheelbase of approx. 8,080 mm) * 40 mm flange coupling ---- Electrical System / Lighting: * 15-pole power connector * LED lighting system 12 / 24 V * 2 LED reversing lights additionally at the rear (switched via reverse gear) * 1 LED rotating beacon (removable incl. bracket) at the rear * TPMS (Tire Pressure Monitoring System) ----General Components: * Mechanically adjustable 3 m warning sign package at the front and rear * Support winch at the front * Outboard folding supports at the rear * Plastic toolboxes approx. 750 x 350 x 300 mm on each side, left & right * Side impact protection * Underrun protection * Plastic quarter fenders ----Loading Area: * 400 mm high bolted front wall * 50 mm softwood flooring, * 2 pairs of container locking devices (extendable to 3 m container outer width) and lockable, locking dimension retracted according to ISO - DIN 15190 = 2,259 mm. Container locking devices extended = 2,819 mm (this dimension is not according to DIN) with an absolute outer width of 3,000 mm ----Load Securing: * Perforated outer frame approx. 45 degrees angled with 2-ton lashing force every 480 mm * Installation of 3-ton lashing eyes every 600 mm possible - 5 x 3-ton UVV lashing eyes installed on each side - * In the corners at the front and rear, 1 x 6.3-ton lashing point each (at the front directly behind the container locking devices in the wooden floor and at the rear in the end beam) * Various holes in the front and end beam for 1.2-ton lashing options ----Ramps: * 1 pair of aluminum sliding ramps approx. 3,570 x 410 mm (load capacity 10 tons / pair) suitable for rubber-tired and tracked vehicles * Storage compartment recessed at the rear under the loading area in the chassis ----Paintwork: * ---Chassis, drawbar, front wall, underrun protection and rear supports hot-dip galvanized--- * Axles, air reservoir, support winch at the front and flange coupling painted in a black tone ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale excepted Lsdpfjv D Tbdex Agqshl ----Delivery Time: * Available from approx. week 39/2026

Condition: new, maximum load weight: 23,210 kg, overall weight: 30,000 kg, axle configuration: 3 axles, Year of construction: 2026, Equipment: ABS, * T 3: * EBS braking system * Emergency release device for spring accumulators * Drum brakes * 3 x 11-ton BPW Eco axles * Parabolic springs * Mechanical axle compensation at the rear * Side impact protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign panels at the front and rear * Front axle with closed plastic mudguards and rear axle with straight, galvanized steel splash guards, each with splash protection * Reflective contour strip on the sides and at the rear * Folding cover (hot-dip galvanized) for the toolbox in the turntable platform * Toolbox made of galvanized steel sheet, approx. 650 x 300 x 600 mm - black powder-coated - located on the side under the chassis * 15-pin electrical connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring and locking clamp * 4 lashing pockets on each side (but no lashing bars included) with simultaneous lashing capability * Lashing package consisting of: 2 lashing eyes (6.4 tons) at the front left and right on the main frame of the turntable platform * 5 pairs of UVV lashing rings, swivel and lowerable * Load-bearing in all directions and embedded in the outer frame in the corners, 13.4 tons, otherwise 10 tons * 6 pairs of mechanical folding outriggers for a total width of 3 meters (but not in the rear slope) * Extension boards under the loading platform, stored in a storage compartment * Excavator arm support over the rear axle up to the end beam, approx. 2,100 mm long (2 pairs of 6.4-ton lashing rings on the side in the excavator arm support) * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable front section and load holding check valves, hydraulic lateral ramp adjustment * Hydraulic flow divider in the trailer (for hydraulic pump output in the truck of more than 40 liters up to a maximum of 140 liters / min.), dual-line hydraulics * Loading area above the slewing ring: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm access ramp) * Loading height when loaded approx. 860 mm +/- 30 mm compensation unit * Chassis, turntable, folding outriggers, rear support legs and access ramps hot-dip galvanized. Lsdpfx Aetplwfsgqjhl * Axles, springs, drawbar, air tank, etc. painted in a black tone. * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 14,400 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, ETÜ-TA-ER 19.0: ---- Braking System: * WabcoEBS-E (electronic braking system) * Emergency release unit for spring brake cylinders * Drum brakes ---- Axles: Ljdpomi Tcqsfx Agqshl * 2 x 11 t Gigant axles ---- Suspension: * Air suspension with lift and lowering device ---- Drawbar / Flange Eye: * Drawbar with 50 mm flange towing eye and height adjustment of 110 mm via offset plate ---- Electrics / Lighting: * RDÜ tire monitoring system * 15-pin power connector * LED tail lights 12 / 24 volts ---- General fittings: * Jost support winch at the front * External foldable supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards ---- Lowbed area: * Reinforcement package for drilling rig transport on the chassis * 50 mm softwood floor, clamped version * Preparation in front of bulkhead for retrofitting container locks * Bolted smooth sheet metal bulkhead * Split side walls from trapezoidal profiled steel sheet, foldable, with central folding stanchion * Steel rear wall, retractable between ramps - holder for storage inside at front bulkhead when not in use * Bolted rear stanchions ---- Load securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Option for installation of 3 t folding lashing rings every 600 mm * Load securing package: in each front and rear corner 1 x 10 t UVV-certified lashing ring, each side 2 x 8 t UVV-certified retractable lashing rings in the outer frame, various holes in front and rear crossmember for 1.2 t lashing options ---- Ramps: * One-piece slide-in ramps 12 t / pair, approx. 2,750 x 620 mm * Rear approach angle approx. 860 mm ---- Loading height: * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm ---- Tires / Wheelbase: * Wheelbase: 1,810 mm * Tires: 235/75R17.5 ---- Paintwork: * Chassis, drawbar, bulkhead, tailgate, foldable supports, and ramps hot-dip galvanized * Axles, air tanks, flange eye, and support winch painted in black * Vehicle is hot-dip galvanized ---- Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ---- Delivery time: * Immediately available ex Egestorf

Condition: new, maximum load weight: 10,760 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic Braking System (EBS) * Emergency release system for spring brake cylinders ----Axles: * 2 x 7 ton Gigant axles ----Suspension: * Parabolic springs with equalizer ----Drawbar / Flange coupling: * Drawbar adjustable in height by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange coupling ----Lighting / Electrical: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General components: * Jost support leg at the front * External, hot-dip galvanized folding supports at the rear * Plastic tool box on the front right side, attached to the front wall * Lateral underrun protection * Plastic quarter fenders ----Low loader platform: * 50 mm softwood flooring * Mounting device for subsequent installation of container locking mechanisms in front of the front wall * Bolted front wall made of smooth sheet metal * Steel side walls - trapezoidal profile - foldable with sideboard lifting mechanism * Steel rear wall can be slid in between the ramps - bracket for storage when not in use inside, in front of the front wall * Rear cross members bolted Lsdpfervvflsx Agqehl ----Load securing: * Perforated outer frame, bent at approximately 45 degrees, with a lashing force of 2 tons every 480 mm * Installation of 3-ton lashing eyes possible every 600 mm * 1 x 6.3-ton lashing point at each front and rear corner * Various holes in the front and end cross members for 1.2-ton lashing options * Profifix lashing rail in the longitudinal axis, in the middle, for lashing with a load capacity of up to 3000 daN ----Ramps: * One-piece mechanical grating ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (can be slid together to 20 mm) * Approach angle at the rear, approx. 860 mm ----Painting: * Hot-dip galvanized chassis as well as drawbar, front wall, ramps, and rear wall * Sideboard color in RAL 9010 pure white * Painting of the side walls in a RAL color is possible for an extra charge ----Information: * --Reinforced and certified body according to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer's warranty * Errors and prior sale reserved ----Delivery time: * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 10,660 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2026, * KA-TA-R 14.4: ----Brakes: * Wabco EBS (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 2 x 7-ton Gigant axles ----Suspension: * Parabolic springs with tandem equalizer ----Drawbar / Flange coupling: * Height-adjustable drawbar by 300 mm with 40 mm flange coupling ----Electrical system / Lighting: * 15-pin power socket * LED tail lights 12/24 V * Tire pressure monitoring system with display option in the truck via EBS signal - without truck-side installation ----General components: * Jost mechanical support legs (front) * 2 mechanical folding support legs (rear) * Plastic toolbox approx. 750 x 350 x 300 mm on the front side, right on the chassis * Underrun protection, bolted * Plastic quarter fenders ----Tipping bridge: * Net hooks in the bearings of the central locking system, as well as 2 on the front wall * Steel pallet-sided, 3-way tipping body with adjustable strong side boards (continuous side walls at the top with internal tube reinforcement - without center posts - foldable with side board spring lifters) * Rear supports, bolted * Combination steel wing doors - rear wall, 2-wing, asymmetrically divided - swivels and locks at 270° - not foldable - as well as with additional pivot frames for the automatic rear wall opening during tipping, locking via a galvanized swivel rod lock at the rear and central locking, deactivation function for the automatic rear wall function when tipping backwards with the wing door open * 4 mm sheet metal floor made of fine-grained steel ----Load securing: * 1 x 5-ton lashing point in each corner * 4 x 3-ton lashing eyes on each side, embedded in the outer frame ----Chassis: * Chassis made of fine-grained steel ----Ramps: * Receiving rail at the rear for the loading ramps * 1 pair of aluminum loading ramps approx. 3,570 x 410 mm (load capacity 10 tons / pair) suitable for rubber-tired and tracked vehicles * Storage compartment under the loading area in the chassis for the ramps, lockable from the rear ----Tires: * Tires 358/55 R 19.5 ----Painting: Lhjdpfx Agjx Hm Rioqjl * Drawbar, underrun protection, rear supports, folding support legs (rear) hot-dip galvanized * Axles, springs, air tanks and support legs painted in a black tone * Painting of the side boards in a RAL color of your choice (but no special or metallic paint) can be changed up to approx. 6 weeks before completion ----Information: * Body - reinforced - with load securing certificate * Errors and prior sale reserved * Sample images ----Delivery time: * Available for immediate delivery from week 29/2026