Used working platform semitrailers for sale (108)

Condition: used, maximum load weight: 34,240 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 11/2022, next inspection (TÜV): 11/2025, loading space length: 13,650 mm, loading space width: 2,550 mm, total width: 2,550 mm, Year of construction: 2022, Equipment: ABS, 3-axle flatbed semi-trailer FLIEGL Type SDS 390 First registration: 11/2022 German registration, one owner Gross weight: 39,000 kg Unladen weight: 4,760 kg Fifth wheel load: 12,000 kg Platform length: 13,650 mm Coupling height: 1,150–1,200 mm Full-load landing gear, 2-speed Plastic toolbox: 650 x 520 x 670 mm 2x additional LED reversing lights Floor: 30 mm anti-slip plywood, forklift axle load up to 7,100 kg Reinforced front wall, 1,950 mm high, high-volume design Outer frame slightly sloped, new 'Load-Lock' version for lashing strap attachment SAF axles with large 430 mm disc brakes 1st axle is a LIFT AXLE Nodpfsxd I Uzox Adgowp KNORR trailer EBS with RSS vehicle stability system Tires: 6 x 385/65 R 22.5, tread depth 90% RENTING is the new BUYING — Full-service rental available immediately with us.

Condition: used, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 06/2008, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, Schwarzmüller platform semi-trailer | BPW axles with disc brakes | Year of manufacture: 2008 | Spare wheel holder | Pallet box | Toolbox | Tyres: 385/65 R22.5 | Subject to errors, input mistakes, and prior sale. Nwedpfoxx Nlwox Adgjp

Condition: used, maximum load weight: 37,420 kg, overall weight: 48,000 kg, axle configuration: > 3 axles, first registration: 03/2015, loading space length: 16,900 mm, loading space width: 2,540 mm, total width: 2,540 mm, total height: 3,000 mm, Year of construction: 2015, Equipment: ABS, HRD SPTM4A Mega Teleskopischen Auflieger Serial number: W09SPTM4NFEN10031 Erstzulassung: 24-03-2015 SAF Achsen Liftachse 2 Nachlauf Gelenckte Achsen Drum brakes with ABS and EBS Luftfederung Reifen:235/75 R17.5 40%, Total weight: 48,000 kg, Leather weight: 10,420 kg, Nutzload: 37,420 kg, Total length: 1290 cm. + 400 eskoppierbar Loading height: 95 cm. Alu Auffahrrampen Total length: 13.30 m, width 2.54 m, height 3.00 m. Nodpoxzmg Refx Adgswp Container Drehverschlusse Fuer 2x20 Fuss,1x40 Fuss.,1x 20 Fuss In Die Mitte Zurrösen Rungentaschen Irrtümer / Schreibfehler und Zwischenverkauf Vorbehalten

Condition: new, maximum load weight: 36,245 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete range of vehicles, including those available for immediate and short-term delivery, on our website. Extract from the specifications. Full equipment details available upon request. Loading Area: * Loading platform with hardwood floor and approx. 1,000 mm x 8° rear bevel * 2 pairs of lashing rings (LC 5,000 daN) * 1 pair of lashing rings (LC 10,000 daN) * 6 pairs of fold-out external lashing rings (LC 5,000 daN) * 2 pairs of fold-out external lashing rings (LC 10,000 daN) * Cutouts in the outer frame for securing straps (LC 2,000 daN) Landing Legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW air-suspended axles * Disc brakes (approx. 377 mm) * Raise/lower function (ET 120) * Axle tools Tyres: * Tyres 435/50 R 19.5 – brand at our discretion * TPMS tyre pressure monitoring system in accordance with ECE R 141. Data transmission to the tractor unit via standardised EBS interface as per ISO 11992. The tractor unit must be able to transmit and display this data for correct functionality. Brake System: * Wabco braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor Steel Construction: * High-strength fine-grain steel frame construction * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical System: * Electrical system compliant with EU regulations * Lighting: 24V ASPÖCK-NORDIK (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection panel with sockets: 24N, 24S & 15-pin according to ISO. 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel structure automatically shot-blasted after welding * Second blasting with corundum for optimal adhesion of the coating system * Complete vehicle chassis metallised with ZINACOR 850 (85% zinc / 15% aluminium) for best possible corrosion protection * Final painting with two coats of 2K topcoat, single colour, RAL 3002 Carmine Red according to RAL 841GL * Rear section metallised and painted RAL 9010 (Pure White) * Paint finish tested in salt spray test according to ISO 9227-NSS * Cavities sealed with special wax * Metallic paint not possible Including the following additional equipment: * Yellow-red air couplings on galvanised front connector strip * 4 wheel chocks with holder Nedpfxsw Tpqqo Adgewp * 2-inch king pin * Loading platform with heavy-duty hardwood floor * 1 spare wheel carrier under the loading platform, right in driving direction * Galvanised folding supports under the rear loading platform bevel * 9 pairs of stake pockets for plug-in stakes, approx. 100 x 50 mm, in the outer frame of the loading platform * 1 galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * Central beam with painted sand layer for anti-slip protection * 1 stainless steel toolbox (INOX), crosswise under the loading platform, approx. 1,000 x 400 x 2,500 mm * 6 pairs of WADER container locks in the loading platform, for 1x 20' container, 2x 20' containers or 1x 40' container * 3 pairs of transverse stake pocket strips mounted in the platform, for plug-in stakes approx. 100 x 50 mm * Holder for up to 9 pairs of plug-in stakes, approx. 100 x 50 mm, bolted inside the front wall * 2 stainless steel (INOX) toolboxes under the loading platform left and right, approx. 600 x 350 x 600 mm * Holder for aluminium drive-on ramps, crosswise under the loading platform, behind the axles

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 11/2021, Year of construction: 2021, Visit our website to view our full inventory of vehicles, including many more photographs and detailed information available in several languages. SEL 8249 Berger SAPL 24 German registration / First owner First registration: 09.11.2021 Year of manufacture: 2021 Technical permissible total weight (kg): 39,000 Permissible total weight (kg): 39,000 Njdpfx Adoxynk Uegewp Unladen weight (kg): 4,000 VIN: VCBUSLARTMFZT1100 Technical inspection (TÜV) valid until: 02/2026 TIRES AND AXLES: Tires: 385/65 R 22.5 Axle configuration: 3 axles (SAF) Air suspension Disc brakes BODY: Internal dimensions: Width (m): 2.48 Length (m): 13.62 VEHICLE DOCUMENTS: Registration certificate (Schein) Registration document (Brief) Additional documents available upon request for an additional fee. M. BUFANO m. (Italiano, English, Deutsch) J. CORDEIRO j. (Português, Español, Italiano, English) J. MARJANOVIC j. (Deutsch, Bosnian) L. OBODYNSKA (Ukrainian, Russian) We speak: German, English, Italian, Spanish, Portuguese, Ukrainian, Russian, Polish, Bosnian While every effort has been made to ensure the accuracy of this information, we cannot accept liability for errors or omissions. We kindly advise our customers to refer to the available photographs. Dimensions provided are approximate values. Our vehicles are sold in the actual condition as seen. We invite customers to visit our premises for a personal inspection of the vehicle’s condition, and we also offer the option of a test drive. Please note: the batteries provided with the vehicle are those currently installed. If you require new batteries, please contact us for pricing information.

Condition: used, maximum load weight: 24,590 kg, overall weight: 31,000 kg, axle configuration: 2 axles, first registration: 06/2010, loading space length: 13,620 mm, loading space width: 2,480 mm, loading space height: 700 mm, total width: 2,550 mm, total height: 2,750 mm, Equipment: ABS, ABS, EBS, BPW EcoPlus axle(s), last axle steered, TRIDEC steering, disc brake system, air suspension with lifting and lowering device, lift axle, screen-printed floor, 6 x stake pocket rail(s) in the middle of the loading area, continuous lashing holes in the outer frame, 2x storage box, vehicle can be fitted with advertising and/or lettering Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. Nwsdpfji S H N Dex Adgjp We would be pleased to make you a financing or leasing offer for this object. Please contact us!

Condition: used, maximum load weight: 32,660 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 07/2013, Equipment: ABS, Vehicle identification number: WKESD00000580961 Own weight: 6,340 kg DE HU due SAF axles with disc brakes Nodpeiac Iujfx Adgjwp LIFT AXLE PALLET BOX Rack pockets in the floor, WITHOUT stanchions Widening lighting Suitable for forklifts Tires: 385/65 R 22.5 Spare wheel holder WITHOUT spare wheel Changes, prior sale and errors are expressly reserved. The description serves to generally identify the vehicle and does not constitute a guarantee in the sense of sales law. The description according to the purchase contract is decisive. Our offer is generally without a new TÜV inspection. If a new TÜV inspection is required, we would be happy to make you an offer from our partner workshops! The vehicle can be covered with advertising and/or labeled. Our general delivery and payment terms apply.

Condition: used, maximum load weight: 30,250 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2014, next inspection (TÜV): 06/2025, loading space length: 13,620 mm, loading space width: 2,480 mm, total width: 2,550 mm, Year of construction: 2014, Equipment: ABS, Schwarzmüller Platform Flatbed Trailer Lift Axle Permissible total weight: 36,000 kg, Unladen weight: 5,750 kg, Payload: 30,250 kg, SAF axles, Lift axle 1st axle, Air suspension, Disc brakes, Underride protection right, left, and rear, 2x storage compartment right, 1x storage compartment left, Rubber rear impact buffer, 2x extensible wide load signs at the front, 2x extensible wide load signs at the rear, 2x crank supports operable from right side, EBS, ABS, Nwsdpfx Ajwqyrhedgjp Perforated external frame with hole spacing approx. 100 mm, Wheelbase: approx. 6,350 + 1,310 + 1,310 mm, External dimensions LxW: approx. 13,840 x 2,550 mm, Loading area LxW: approx. 13,620 x 2,480 mm, Front wall height: approx. 2,400 mm, Loading height: approx. 1,250 mm, Tires: 385/65R22.5, Tread depth tires left front: 4 mm, Tread depth tires left middle: 16 mm, Tread depth tires left rear: 8 mm, Tread depth tires right front: 5 mm, Tread depth tires right middle: 15 mm, Tread depth tires right rear: 10 mm, Further equipment: Reinforced steel frame welded construction for point load 20 t over 4 m at frame center of gravity for ASH unladen 1,090 - 1,190 mm with air-suspended tractor, replaceable 2" kingpin (EU installation size, corner dimension 2,040 mm), Perforated external frame with hole spacing approx. 100 mm, oval hole 40/25 mm according to DIN EN 12640 Air suspension with lift and lower function (approx. +120/-80 mm), Automatic setting of driving level from 15 km/h, SAF "Intradisc-plus-Integral" air suspension unit with low-maintenance disc brakes, ø 430 mm, 3 x 9 t rigid, wheelbase 2 x 1,310 mm, Front axle automatically liftable = 2-sided lift (1 x 96307) lifts and lowers automatically depending on weight (when lift axle is raised, the loading or total height increases by approx. 50 mm) and additionally with forced lowering incl. integrated start-up aid limited by speed for button operation in the cab (without button installation), 1 odometer = hubodometer (ECO-Meter) (KIT No. 10801, with hubcap KIT No. 52917) (on 2nd axle front right), Mech. 2 x 12 t support winches, single-sided operation and push compensation, Two-line brake, EBS-E - electronic brake system (Wabco 2S2M = one axle = 2nd axle monitored), RSS - stability program, Spring-loaded parking brake on 2 axles, Aluminum air tank, unpainted, Plywood floor 27 mm, flush with outer frame, 2 steel hat profile rails above the longitudinal beams plus additional 12 mm plywood floor, beveled to the outer frame, Fixed aluminum hollow profile front wall 2,400 mm with 2 center supports,

Condition: used, maximum load weight: 33,900 kg, overall weight: 39,000 kg, first registration: 09/2005, total width: 2,550 mm, total height: 2,770 mm, Equipment: ABS, Air brake, drum brake, BPW axles, wooden floor, used vehicle Nwjdpfxjxxwdhe Adgjp Vehicle no. 3244, air brake ALB/ABV, 3x tool box, side underrun protection left + right, unladen weight: 5,100 kg, gross weight: 39,000 kg, BPW axles with drum brakes, Alcoa aluminium rims, tyre size: 385/55R 22.5, wooden cargo floor, container mounts, stake pockets, cargo area dimensions LxW: 13,520 x 2,550 mm. For enquiries please... Subject to errors and prior sale.

Condition: new, maximum load weight: 45,115 kg, overall weight: 53,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our entire vehicle inventory, including vehicles available for immediate delivery and short-term notice, on our website. Extract from the equipment list. Complete specification available upon request. Cargo Area: * Cargo area with approx. 30 mm thick hardwood floor * 8 pairs of lashing rings foldable outwards (LC 10,000 daN) Landing Gear: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Tyres: * 385/65 R 22.5 * TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the truck takes place via the standardised EBS interface according to ISO 11992. For correct display, the truck must be able to transmit and display these data. Axles and Suspension: * BPW axles, technical capacity per axle 10,000 kg * 1st and 3rd axles hydro-mechanically steered, mounted on turntable, 2nd axle fixed * Air suspension with lift/lower valve * Axle tool Brake System: * Wabco brake system in accordance with EU regulations with EBS-E (4S3M) without interconnecting lines to the tractor unit Electrical System: * Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection rail with 24N, 24S & 15-pin ISO sockets * 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel Construction: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Painting: * Complete steel structure automatically blast-cleaned with shot blasting machine after welding * Second blasting with corundum for optimum coating adhesion * Final painting with 2 coats of 2K topcoat, single colour in RAL 3002 Carmine Red according to RAL System 841GL * Rear section metallised and painted in RAL 9010 (Pure White) * Rims in silver * Paint system tested in salt spray test according to ISO 9227-NSS * Sealing of cavities with special wax Accessories: * Cargo area with approx. 30 mm thick hardwood floor * 2-inch kingpin * One galvanised steel front wall (EN12642-XL), approx. 1,200 mm high * Yellow-red air couplings at the galvanised front connection rail * 4 wheel chocks with holder on the front wall * Storage for approx. 1,000 mm stake pockets in the central beam at the rear * At the gooseneck and rear panel, left and right, one bracket each for warning signs incl. socket * Yellow reflector tape according to EU regulations on the side and rear of the trailer * 10 pairs of stake pockets for plug-in stanchions approx. 100 x 50 mm in the outer frame of the platform * European reflector boards (Red-Yellow) at the rear of the trailer * One holder for a rotating beacon at the rear of the trailer * One mudflap at the rear of the trailer * Manual and description on USB stick * 80 km/h speed stickers at the rear and on both sides * Electro-hydraulic power unit * 1 shunting coupling bolted with reinforcement to the end traverse * Axle load gauge to determine axle load including load diagram * Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and removable pump guard * Remote steering from front and rear via cable remote control with push buttons, with axle alignment control (without installation in the tractor unit) * 7 pairs of galvanised plug-in stanchions approx. 100 x 50 mm, approx. 1,000 mm high Nwedpfx Adexl Nf Regjp * 4 pairs of stake pocket rails, mounted transversely in the platform for plug-in stanchions approx. 100 x 50 mm * Spiral cable

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 11/2021, Year of construction: 2021, Visit our website to view our entire inventory, including many more photos and detailed information available in multiple languages. SEL 8247 Berger SAPL 24 German registration / 1st owner First registration: 09.11.2021 Year of manufacture: 2021 Gross vehicle weight rating (kg): 39,000 Permissible total weight (kg): 39,000 Tare weight (kg): 4,000 VIN: VCBUSLARTMFZT1098 Next inspection (HU): 12.2025 Nodpfsxynk Isx Adgewp TIRES AND AXLES: Tires: 385/65 R 22.5 Axle configuration: 3 axles SAF Air suspension Disc brakes BODY: Internal dimensions: Width (m): 2.48 Length (m): 13.62 VEHICLE DOCUMENTS: Registration certificate part I (Fahrzeugschein) Registration certificate part II (Fahrzeugbrief) Additional documents available upon request for an extra charge. M. BUFANO (Italiano, English, Deutsch) J. CORDEIRO (Português, Español, Italiano, English) J. MARJANOVIC (Deutsch, Bosanski) L. OBODYNSKA (Ukrainian/українська, Russian/русский) We speak: GERMAN, ENGLISH, ITALIAN, SPANISH, PORTUGUESE, UKRAINIAN, RUSSIAN, POLISH, BOSNIAN. While every effort has been made to ensure the accuracy of the information provided, we cannot accept liability for any errors or omissions. We kindly ask our customers to review the photos provided. All dimensions are approximate. Our vehicles are sold in their current condition. We invite customers to visit our premises to inspect the vehicle in person. Test drives are available upon request. Please note that the vehicle is supplied with the batteries currently installed. If you require new batteries, we are happy to provide price information.

Condition: used, empty load weight: 6,560 kg, maximum load weight: 26,920 kg, overall weight: 33,500 kg, axle configuration: 3 axles, first registration: 05/2012, suspension: air, tire size: 385/65 R22,5, Equipment: ABS, Schwarzmüller flatbed trailer | BPW axles with disc brakes | Year of manufacture: 2012 | Spare wheel holder | Toolbox | Tyres: 385/65 R22.5 | Subject to errors and prior sale. Nwodpfx Adjxtdq Rjgep

Condition: used, maximum load weight: 29,330 kg, overall weight: 38,000 kg, axle configuration: 2 axles, first registration: 10/2011, Equipment: ABS, Fahrzeug-Ident-Nr.: WMP2S0630BCBL4246 Own weight: 8,670 kg DE HU due Technical fifth wheel load front: 18,000 kg Kingpin 2 inch - Swing radius front 1,900 mm / rear 2,000 mm Technical rear axle loads: 2 x 10,000 kg BPW Eco Plus axles with disc brakes Axle 2 = STEERING AXLE (FORCIBLE) Dimensions: 13,800 x 2,550 mm Loading height: approx. 1,500 mm Widening lighting Container holder Nwodpfjmn Ni Hjx Adgop Stake pockets, including stakes Support feet Central lubrication system 4 x toolbox 1 x storage compartment - sheet metal 1 x front storage box Central lubrication system Tires: 425/65 R 22.5 Spare wheel holder WITH spare wheel Subject to alterations, prior sale and errors excepted. The description serves the general identification of the vehicle and does not constitute a warranty in the sense of sales law. The description according to the purchase contract is decisive. Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! The vehicle may have advertising stickers and/or lettering. Our general terms of delivery and payment apply.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 02/2011, next inspection (TÜV): 11/2025, loading space length: 13,600 mm, loading space width: 2,490 mm, Equipment: ABS, * 8338 - Vehicle ID for telephone inquiries * ABS, EBS, BPW Eco-Plus axles, disc brakes, air suspension with lift and lower function, storage boxes, overwidth warning signs, bar for hanging ramps at the rear, rear support legs, front wall * Tires 1st axle: 445/45R19.5 (13 / 11 mm) * Tires 2nd axle: 445/45R19.5 (13 / 11 mm) * Tires 3rd axle: 445/45R19.5 (9 / 10 mm) ----our email address:     our service for you:       - Procurement of temporary or customs license plates       - Transfer/delivery EU-wide       - Customs clearance for export to non-EU countries If you have questions in Russian, you can call the following number * Njdpjxwtbasfx Adgewp WhatsApp just for Russian speakers: * WhatsApp for English, German, and other languages:

Condition: used, maximum load weight: 27,980 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 02/2013, next inspection (TÜV): 02/2026, loading space length: 12,400 mm, loading space width: 2,470 mm, total width: 2,550 mm, total height: 2,840 mm, Year of construction: 2013, Equipment: ABS, Whatsapp/Viber (German/English/Arabic): Whatsapp (German/English): ---- - SUITABLE TRACTOR UNIT WITH CRANE AVAILABLE FOR AN EXTRA CHARGE - Chassis * Kotschenreuther SPN335 * Mercedes-Benz - axles * 1x lift axle * Air suspension * Disc brakes * Tires 1-3: 385/65 R22.5 * ABS * EBS ----Body * Flatbed * Stanchion pockets * Cargo area dimensions (LxWxH): 12,400 mm x 2,470 mm ----Technical data * Gross vehicle weight: 35,000 kg * Unladen weight: 7,020 kg * Payload: 27,980 kg * Technical payload: 30,980 kg ----#German vehicle*1-owner*Excellent condition*SUITABLE CRANE TRACTOR UNIT AVAILABLE FOR AN EXTRA CHARGE# Financing/leasing/hire purchase available on request ----Advertising/company logos on the vehicles may have been digitally removed from the pictures. ----Contact by phone or WhatsApp: (German, English, Arabic) (German, English) ----We look forward to your visit. To make your appointment as pleasant as possible, we kindly ask you to schedule a visit in advance. ----Subject to errors, changes, and prior sale. All details are provided without guarantee, especially regarding equipment and accessories. Nwedpoxw Dklefx Adgep

Condition: used, maximum load weight: 36,400 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 04/2024, next inspection (TÜV): 06/2026, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate or short-term delivery, on our website. Excerpt from the equipment. Complete equipment list available upon request. Loading Platform: * Gooseneck, approx. 4,100 mm long, with central beam * Loading platform in double-extendable design, approx. 9,400 mm long, with pneumatically operated locking mechanism * A fixed intermediate table, approx. 200 mm wide, is welded to the central beam * Supply lines are routed protected inside the extendable beams and automatically adapt to the respective loading platform length (exception: supply to the first locking mechanism) * For tractor units: 4 x 2 and 6 x 2 Axles and Suspension: * BPW axles and suspension, all axles hydro-mechanically force-steered, mounted on turntables * Technical air suspension with lift and lower valve Tyres: * 235/75 R 17.5 3PMSF twin tyres * Brand of our choice. Load index 143/141J (144/144F) Braking System: * WABCO EBS-E braking system according to EU regulations Metallisation: * Complete HRM metallisation (High Resistance Metallisation) * Entire steel structure shot-blasted, then hot-finished with ZINACOR 850 (Zinc 85% - Aluminium 15%) Painting: * 6-coat final treatment: Entire steel structure shot-blasted after welding. One coat of zinc-based primer, one coat of adhesion primer. Final topcoat: 2 coats of 2-component acrylic paint, single colour, followed by cavity sealing with special wax * Trailer colour: RAL 3002 Carmine Red * Wheel rim colour: Silver grey * Lamp bracket colour: RAL 9010 Pure White Included Accessories: * Steel front wall, approx. 1,600 mm high, certified version according to EN12642:2016 XL. Max. load capacity: 20,000 daN * 4 pairs of recessed lashing rings in the gooseneck outer frame: the front 3 pairs fitted horizontally (LC 10,000 daN), rear pair fold-out to the outside (LC 10,000 daN) * 4 pairs of stake pockets set into the gooseneck outer frame for plug-in stakes approx. 100 x 50 mm Nwjdpew E A Egefx Adgep * 1 transverse stake pocket rail mounted at the rear in the gooseneck floor for plug-in stakes approx. 100 x 50 mm * 2-inch kingpin * 4 wheel chocks with holders in front of the front wall * Mechanical landing gears with 2-speed gearbox and crank. JOST Modul B, static test bearing capacity approx. 50,000 kg * On gooseneck and loading platform, wooden flooring approx. 32 mm thick, framed in aluminium omega profiles * Large cross-section extension tube with a locking point every approx. 500 mm * Small cross-section extension tube with a locking point every approx. 1,000 mm, providing a locking interval of approx. 500 mm * 10 pairs of recessed horizontal lashing rings in the outer frame of the loading platform, fold-out to the outside: one pair before the last axle and one pair at the end crossmember of the trailer (LC 10,000 daN each), all other lashing rings (LC 5,000 daN) * 8 pairs of stake pockets set into the outer frame of the loading platform for plug-in stakes approx. 100 x 50 mm * 3 transverse stake pocket rails mounted in the loading platform floor for plug-in stakes approx. 100 x 50 mm * 1 spare wheel carrier under the loading area on the right-hand side (direction of travel) * 1 lockable stainless steel toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading area on the left (direction of travel) * Access ladder mounted on the right (direction of travel) * Last axle with air bellows venting activated by operating the parking brake * 3 kW electr

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 11/2020, Year of construction: 2020, Visit our website, where you will find our complete vehicle inventory with many additional photos and information in multiple languages. SEL 8201 Berger SAPL 24 German registration / 1 owner First registration: 19.11.2020 Year of manufacture: 2020 Technical gross weight (kg): 39,000 Permitted total weight (kg): 39,000 Unladen weight (kg): 4,000 VIN: VCBUSLARTLFZT0713 MOT valid until: 01/2026 TYRES AND AXLES: Tyres: 385/65 R 22.5 Axle configuration: 3 axles Air suspension Disc brakes BODY: Internal dimensions: Width (m): 2.48 Length (m): 13.66 VEHICLE DOCUMENTS: Registration certificate part 1 (Fahrzeugschein) Registration certificate part 2 (Brief) Additional documents available on request for a surcharge. M. BUFANO (Italiano, English, Deutsch) J. CORDEIRO (Português, Español, Italiano, English) J. MARJANOVIC (Deutsch, Bosanski) L. OBODYNSKA (Ukrainian, Russian) We speak: GERMAN, ENGLISH, ITALIAN, SPANISH, PORTUGUESE, UKRAINIAN, RUSSIAN, POLISH, BOSNIAN Nwodpfx Aexwr E Dodgjp While every effort has been made to ensure the accuracy of the information, we cannot accept liability for any errors or omissions. We kindly ask our customers to consult the available photos. The listed measurements are approximate figures. Our vehicles are sold in their current condition as seen. We invite customers to visit our premises to personally inspect the condition of the vehicle. We also offer the possibility for a test drive. Please note that the batteries supplied with the vehicle are those currently installed. Should the customer require new batteries, we are happy to provide price information.

Condition: used, maximum load weight: 30,020 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 04/2012, next inspection (TÜV): 04/2026, loading space length: 12,880 mm, loading space width: 2,500 mm, total width: 2,550 mm, total height: 2,600 mm, Year of construction: 2012, Equipment: ABS, Whatsapp/Viber (German/English/Arabic): Whatsapp (German/English): ---- Highlights: * Rear extendable by 1,340 mm * 2 x turntable steering axles * Stakes * Heavy-duty for steel transport * 8 x underfloor cable winches with steel cable ---- Chassis Njdpfexmp Nfex Adgowp * Schmidt SP/38/E/12.8 * Mercedes axles * Air suspension * Disc brakes * Tyres: 385/65 R22.5 * ABS * EBS * Reversing camera ---- Body * Flatbed / platform * Rear extendable in 3 stages: 1st stage: 500 mm, 2nd stage: 500 mm, 3rd stage: 340 mm * Total extension: 1,340 mm * Load area dimensions (LxW): 13,000 mm - 14,220 mm x 2,500 mm * Side wall height: 780 mm * Self-lubricating * Removable stakes * 8 x underfloor cable winches with steel cable ---- Technical data * Gross vehicle weight: 38,000 kg * Unladen weight: 7,980 kg * Payload: 30,020 kg ---- #German vehicle *1st owner# Financing/leasing/purchase by instalments available on request ---- Advertising/company logos may have been digitally removed from the images. ---- Contact by phone or WhatsApp: (German, English, Arabic) (German, English) ----We look forward to your visit. To make your experience as pleasant as possible, please arrange an appointment in advance. ---- Subject to errors, omissions, and prior sale. All information provided without guarantee, especially regarding equipment and accessories.

Condition: new, maximum load weight: 36,500 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt from the equipment features. Full equipment list available upon request. - Gooseneck, approx. 4,100 mm in length with central beam - Load platform with double-extendable design, length approx. 9,400 mm - BPW axles and suspension - All axles hydromechanically forced-steered - Technical axle load: 12,000 kg - Air suspension with raise and lower valve - Twin tires 235/75 R 17.5 3PMSF - WABCO braking system, EBS-E - 3 kW electro-hydraulic unit for hydraulic operations. Without installation of supply connections on the tractor unit - 4 pairs of stake pockets integrated in the outer frame of the gooseneck, suitable for insertable stakes approx. 100 x 50 mm - 2-inch king pin - 8 pairs of stake pockets integrated in the outer frame of the loading area, suitable for insertable stakes approx. 100 x 50 mm - 1 lockable INOX toolbox, approx. 1,250 x 500 x 550 mm (L x W x H), mounted under the loading platform on the left-hand side in direction of travel - Remote steering control from front and rear using cable remote with push buttons, with axle tracking control, without installation in the tractor unit - 2 axle load gauges mounted on the left side - Steel front wall, approx. 1,600 mm high - 3 transverse rows of stake pockets mounted in the floor of the loading area for insertable stakes approx. 100 x 50 mm - 1 transverse row of stake pockets mounted in the floor of the gooseneck for insertable stakes approx. 100 x 50 mm Njdpfxowvzg Rs Adgewp - 1 additional lockable INOX toolbox, mounted under the loading area - WADER container pockets in the loading area for transporting: 2x 20' containers or 1x 40' container - Central automatic lubrication system with 2 pumps, BEKAMAX brand - Complete HRM Metalization (High Resistance Metallisation)

Condition: used, maximum load weight: 29,850 kg, overall weight: 38,000 kg, axle configuration: 3 axles, first registration: 11/2010, loading space length: 12,950 mm, loading space width: 2,460 mm, loading space volume: 19 m³, total width: 2,550 mm, total height: 2,490 mm, Year of construction: 2010, Equipment: ABS, Whatsapp/Viber (German/English/Arabic): Whatsapp (German/English): ---- Highlights: * Extendable width * Rear extendable by 1,500 mm * 2 x turntable steering axles * Stanchions * Tyres in excellent condition * NEW brakes * Heavy-duty for steel transport * 8 x underfloor cable winches with steel cable * Matching truck optionally available at extra cost ----Chassis * M&V NS4G31 * SAF axles * Air suspension * Disc brakes * Tyres: 385/65 R22.5 * ABS * EBS * Rear view camera ----Superstructure * Flatbed / platform * Rear extendable by 1.5 m * Dimensions (LxWxH): 12.95 m - 14.45 m x 2.46 m x 0.6 m Nedpfxexa Tfdj Adgswp * Removable stanchions * 8 x underfloor cable winches with steel cable ----Technical data * GVW: 38,000 kg * Unladen weight: 8,150 kg * Payload: 29,850 kg ----#German vehicle*1st owner*Tyres TOP*Optionally with matching truck at extra cost# Financing/leasing/installment purchase available upon request ----Please note: Advertising/company logos on vehicles may have been digitally removed from some images. ----Contact by phone or WhatsApp: (German, English, Arabic) (German, English) ----We look forward to your visit. To ensure your experience is as pleasant as possible, we kindly ask that you make an appointment in advance. ----Subject to errors, inaccuracies, and prior sale. All information provided without guarantee, especially regarding equipment and accessories.

Condition: used, maximum load weight: 37,535 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 08/2024, next inspection (TÜV): 08/2026, total width: 2,540 mm, Equipment: ABS, You can find our entire vehicle inventory, including immediately and soon-available vehicles, on our website. The following is an excerpt from the equipment specification. Full equipment details available on request. Loading Platform: * Extendable loading platform with pneumatically operated locking mechanism * 7 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Nwodpoxgk U Nefx Adgep Axles: * BPW axles, air-suspended, with disc brakes (approx. 430 mm), fitted with lift/lower function. Technical axle load: 10,000 kg each (ET0) * Self-steering axle with electromagnetic reverse lock, activated via reverse gear or manually * Axle tool Tyres: * Tyres 385/65 R 22.5 Brake System: * Brake system compliant with EU regulations with EBS-E (2S2M), without connecting lines to tractor unit Steel Construction: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * Premium and durable corrosion protection of the standard shot-blasted welded frame by a two-component (2K) zinc dust primer * High-quality single-color topcoat (2K) in RAL 3002 carmine red * Rims in silver * Rear section metallised and painted in RAL 9010 (pure white) Including the following additional equipment: * Yellow-red air couplings on galvanised front connector bar * 4 wheel chocks with holders * 2" king pin * Yellow reflective tape compliant with EU-standard on sides, extension and trailer rear * European reflector boards (red-yellow) on rear of trailer * Loading platform with approx. 30 mm thick wooden floor encased in Omega profiles * 10 pairs of stake pockets for insertable stanchions approx. 100 x 50 mm in the outer frame of the loading platform * Storage for up to 9 pairs of insertable stanchions approx. 100 x 50 mm bolted to the inside of the front wall * 1 spare wheel holder under the loading platform on the left in the driving direction, without spare wheel * One mudflap at the rear of the trailer * Manual and documentation on USB stick * Bracket for rotating beacon at the rear of the trailer * On gooseneck and rear panel, left and right, one holder each for warning signs, including socket * Speed stickers 80 km/h, rear and both sides * Load gauge for axle load determination including load chart * Galvanised steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container pockets on loading platform, for 1x 20' container, 2x 20' containers or 1x 40' container flush with the rear * INOX toolbox, approx. 600 x 350 x 600 mm, under the platform on the left in the driving direction * 4 pairs of longitudinal stake pocket rails for 80 x 50 mm insertable stanchions mounted on the loading platform * Lift axle on the front axle with control via TEBS E depending on current axle load and loading condition * 2 LED reversing lights mounted on rear panel * HRM metallisation (High Resistance Metallisation)

Condition: used, maximum load weight: 38,080 kg, overall weight: 48,000 kg, axle configuration: 3 axles, first registration: 02/2025, next inspection (TÜV): 02/2026, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Excerpt from the equipment list. Full specifications available upon request. Loading Platform: * Extending loading platform with pneumatically operated locking mechanism * Loading platform with approx. 30 mm thick wooden floor framed in omega profiles * 7 pairs of folding external lashing rings (LC 5,000 daN) * 3 pairs of folding external lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the platform for attaching tension belts (LC 2,000 daN) Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox, approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles and suspension * All axles hydro-mechanically forced-steered * Equipped with disc brakes Njdpjxf Sifefx Adgowp * Technical axle load: 10,000 kg each (ET 0) * Air suspension with lift and lower valve * Axle tools Tyres: * Tyres: 385/65 R 22.5 Braking System: * Braking system according to EU regulations with EBS-E (2S2M), without connecting lines to the tractor Warning Signs: * Mountings on the gooseneck and rear panel left and right for warning signs, including socket Electrical System: * Electrical system according to EU regulations * Lighting 24 Volt ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX on the front connection strip with sockets 24N, 24S & 15-pin, connection according to ISO 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel Construction: * Steel structure made of high-strength fine-grained steels * Steel grades S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: * First-class, durable corrosion protection for the standard grit-blasted welded frame, guaranteed by a two-component zinc dust primer * High-quality, single-colour two-component topcoat in RAL 3002 carmine red * Rims in silver, add-on parts as per manufacturer's choice * Rear section metallized and painted in RAL 9010 pure white Included Accessories: * 2-inch kingpin * 4 wheel chocks with brackets on the front wall * Remote steering, front and rear, cable-operated by push buttons, with single-track control of the axles (without installation in the tractor) * Manual and description on USB stick * Electro-hydraulic unit * Galvanized connection strip at front, yellow-red air couplings * Yellow reflective tape according to EU regulations on the sides, extension and rear of the trailer * European reflective panels (red-yellow) on the rear of the trailer * One mud flap at the rear of the trailer * Mounting for rotating beacon at the rear of the trailer * 10 pairs of pocket sockets for plug-in stanchions 100 x 50 mm in the outer frame of the loading platform * 1 spare wheel holder under the platform on the right-hand side * Speed stickers 80 km/h on the rear and on both sides * Load manometer for determining axle loads including load chart * Galvanized steel front wall (EN12642-XL), approx. 1,600 mm high * 6 pairs of WADER container pockets in the platform for: 1 x 20' container, 2 x 20' container or 1 x 40' container; an additional locking point is provided in the extension for a 45' container * 4 pairs of transverse stanchion strip pockets for plug-in stanchions approx. 100 x 50 mm * Storage for plug-in stanchions on the inside of the front wall * Access ladder installed on both left and right side in the direction of travel * One INOX toolbox, approx. 1,200 x 460 x 550 mm, mounted under the loading platform at the front left in the direction of travel * One add

Condition: used, maximum load weight: 32,340 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 07/2024, next inspection (TÜV): 07/2025, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Excerpt from the equipment list. Full equipment details available upon request. Chassis * Welded construction made from high-grade steel profiles with punched-through crossmembers, designed for high point loads Coupling Device * 2-inch kingpin Underrun Protection * Bolted version, compliant with EU regulations Side Guard Protection * Compliant with EU regulations Landing Legs * 2 x 12 t landing legs with compensating foot and single-sided operation (right side in direction of travel) Axles Nwjdpfx Aewbb Ufodgep * 3 x 9 t air suspension axle assembly * Disc brakes * Manufacturer: Gigant Brake System * Dual-circuit compressed air brake system compliant with EU regulations with EBS and RSS * Automatic load-dependent control * Spring-actuated cylinders for parking brake * Reversed polarity-safe coupling heads, permanently mounted on the front crossmember (no connecting line to tractor unit) * Manufacturer: Wabco Tyres * 6 units, 385/65 R22.5 160J on steel rims 11.75 x 22.5 ET 120 Mudguards * Compliant with EU regulations * PVC mudguards in front of and behind the axle assembly Spare Wheel Carrier * 1 double basket incl. mounting material for one spare wheel with ET 120 Load Securing * 9 pairs of foldable lashing rings, evenly distributed, tensile force approx. 8.0 t * 8 pairs of foldable lashing rings, evenly distributed, tensile force approx. 2.5 t * External frame with drilled holes every approx. 500 mm for tension belts Front Wall * Reinforced steel construction, fixed * Inside lined with approx. 9 mm screen-printed flooring (approx. 1,250 mm high) Floor * Approx. 28 mm Z-hardwood floor recessed into the external frame Lighting System * Compliant with EU regulations, 24 Volt, with multi-chamber lights * LED side marker lights * LED position lights front (white) * LED outline lights at rear * Number plate lights * 1 x 15-pin and 2 x 7-pin plug connections on the front crossmember Paintwork * Chassis and front wall blast-cleaned, primed, and painted in a single color * Chassis: RAL 3002 carmine red * SSV: anodized aluminum * Underrun protection: white (RAL 9010) * Add-on parts: galvanized/KTL black * Rims: silver Additional Equipment * First axle liftable, with fully automatic, load-dependent lifting control * 10 pairs of stake pockets in the external frame, evenly distributed * 4 rows of stake pockets across the load floor * 20 pieces of stakes, galvanized tube 80/50, total length approx. 1,000 mm * Inside the front wall, a magazine for 20 plug-in stakes * 5 x 25 side and rear boards made of anodized aluminum hollow profiles, approx. 600 mm high, folding and removable * Removable Kinnegrip stakes * Sliding rails under the chassis left and right for side boards and stakes * Work light on lamp bracket (activated via reverse gear) * 2 PVC toolboxes, approx. 660 x 400 x 500 mm

Condition: new, maximum load weight: 56,570 kg, overall weight: 66,500 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Extract from the equipment list. Complete specifications available upon request. Chassis: * Frame construction made of welded longitudinal beams and inserted cross beams * Underrun bar width approx. 700 mm * Fifth wheel plate at least approx. 8 mm thick, positioned between the longitudinal beams * Maximum crossmember spacing 400 mm (for longitudinally laid floor) * 3.5-inch king pin according to SAE standard, replaceable * Outer frame as UNP 200, open to the outside * Technical saddle load 26,500 kg Landing Gear: * 24 t telescopic landing gear JOST - MODUL CH (Heavy Duty) S-foot Axles: * 4 x 10 t SAF axles with large drum brakes * 22.5 single tires * Axle spacing approx. 1,700/1,810/1,810 mm * Air suspension system with 10 t load capacity each * Lifting and lowering device with 1 rotary slide valve Knorr/Wabco * Bracket for lifting and lowering device, bolted design Brakes: * Smartboard/TIM/Infocenter on bracket for lifting and lowering, in addition to the lift/lower valve * Without battery (operable only with towing vehicle) * Bracket for lights and brakes at the front of the underrun bar, total height approx. 700 mm * Basic version of tire pressure monitoring, connected to the EBS CAN bus system * With dual-release valve for brake and spring actuator * Test nipple for brake cylinder pressure at the front right brake cylinder * 1 coupling head each red and yellow * Lifting and lowering device mounted at the rear left (in the direction of travel) * EBS brake system by Wabco * EBS diagnostics via CAN bus (EBS plug), no external diagnostic cable provided! Tyres: * 8 x 445/65 R 22.5 - brand of our choice * Hub centering Lubrication: * Grease nipple strips on bogies and at the front of the steering system Nedpfxewx Dcte Adgswp * No central lubrication Body: * Without body certificate according to DIN EN 12642 XL * 2x LED work lights on top of the front wall (facing rearwards), switch on lift/lower bracket * Heavy-duty front wall for platform * Side contour marking in yellow, rear in yellow * Front wall approx. 800 mm high, with sheet metal cladding, bolted design Lighting system: * 2x LED work lights mounted in the lamp plate, switched via reverse gear * 2x LED work lights, switched via reverse gear, 1 each side near landing gear * 2x LED reversing lights, 1 per side in front of 1st axle * Lighting/wiring system brand of our choice * License plate illumination * The towing vehicle must provide sufficient power for the selected lighting (esp. reverse light) * Front position lights, lower, white, 1 each right and left (LED) * 24 Volt lighting system with large multifunctional lamp * Side marker lights (LED) flashing * 1 x 15-pin and 2 x 7-pin connections at the front via multifunction box * EBS socket * 1 pair of lane departure lights (LED) Floor: * Hardwood floor approx. 28 mm, alternately with galvanized omega steel profiles Paint/Coating (no metallic colors): * Chassis painted in RAL 3002 flame red * Front wall (steel construction) painted in RAL 3002 flame red * Axle hubs in chassis color * Axles and landing gear in black * Wheels in aluminum/silver, similar to RAL 9006 * Wheel nuts untreated * Underrun protection painted in RAL 9010 pure white (aluminum) Accessories: * Lifting device for 1st axle * 9 hook plates welded into the outer frame per side. Lashing load max. 3,000 daN * 12 per side

Condition: used, maximum load weight: 32,610 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2023, next inspection (TÜV): 11/2025, total width: 2,550 mm, Equipment: ABS, You can find our complete selection of vehicles with immediately and short-term available units on our website. Sample from the equipment list. Full equipment details available upon request. Chassis: * Welded construction made from high-quality steel profiles with through-profile cross members, designed for high point loads. Coupling Device: * 2-inch king pin Underrun Protection: * Bolted version, compliant with EC regulations Side Impact Protection: * EC compliant Landing Legs: * 2 x 12 t landing legs with compensating foot and one-sided operation on the right hand side (FR) Axles: * 3 x 9 t air suspension axle assemblies Nodpfowyhy Eex Adgowp * Disc brakes * Brand: Gigant Brake System: * Dual-line compressed air brake system compliant with EC regulations, equipped with EBS and RSS, automatic load-dependent control * Spring brake cylinders as parking brake * Foolproof coupling heads permanently mounted on front crossmember, without connection line to tractor unit * Brand: Wabco Tyres: * 6 off, 385/55 R22.5 160J on steel rim 11.75 x 22.5 ET 120 Mudguards: * EC compliant, PVC mudguards in front of and behind the axle assembly Spare Wheel Carrier: * 1 piece double basket with mounting hardware for one spare wheel with ET 120 Load Securing: * 9 pairs of foldable lashing rings, evenly distributed, tensile force approx. 8.0 t * 8 pairs of foldable lashing rings, evenly distributed, tensile force approx. 2.5 t * Drill holes for tie-down straps approximately every 500 mm on the outer frame Front Wall: * Reinforced steel construction, fixed * Interior lined with approx. 9 mm phenolic plywood floor (approx. 1,250 mm high) Floor: * Approx. 28 mm Z-hardwood floor set in outer frame Lighting System: * EC compliant, 24 Volt, with multi-chamber lamps * LED side marker lights * LED front position lights (white) * LED rear outline marker lights * Number plate lights * 1x 15-pin and 2x 7-pin plug connectors on front crossmember Paintwork: * Chassis and front wall sand-blasted, primed and painted in single color * Chassis: RAL 3002 carmine red * SSV: aluminium anodized * Underrun protection: white RAL 9010 * Attachments: galvanized/KTL black * Wheels: silver Including Special Accessories: * First axle liftable with fully automatic, load-dependent lift control * 10 pairs of stake pockets in outer frame, evenly distributed * 4 rows of stake pockets crosswise to loading area * 20 stakes made of galvanized pipe 80/50, total length approx. 1,000 mm * Storage magazine for 20 plug-in stakes on inner front wall * Twistlocks for 1 x 40’ and 2 x 20’ containers, flush-mounted at the rear * Twistlocks for 1 x 20’ container in middle position * Work light on lamp bracket (switched via reverse gear) * 2 PVC toolboxes, approx. 660 x 400 x 500 mm