Used Müller-Mitteltal Semitrailers With Work Platform for sale (269)

Condition: new, maximum load weight: 16,400 kg, overall weight: 30,000 kg, axle configuration: 3 axles, Year of construction: 2026, * T3 Profile 30.0: * EBS-E (electronic braking system) * TPMS (tire pressure monitoring system) * Emergency release device for spring accumulators * Drum brakes Fpodeq Dyvcepfx Ah Tel * 3 x 11 ton BPW Eco axles * Air suspension with lifting and lowering system * SmartBoard as an information tool on the trailer with pressure sensors for displaying total axle load per axle group * Lateral underrun protection * Mechanically adjustable warning sign packages at the front and rear * Front axle with closed plastic mudguards and rear axle with straight galvanized steel mud flaps, each with splash guards * Folding cover (hot-dip galvanized) for the toolbox in the turntable platform * Toolbox made of galvanized sheet steel, approx. 650 x 300 x 600 mm (black powder-coated), on the right side * 15-pin power connector * LED lighting 12 / 24 V * LED rotating beacon (removable) at the rear * Side marker lights with turn signal control * Drawbar with 40 mm drawbar eye and height adjustment via torsion spring & locking pin * Tire pressure monitoring system with display option in the truck via EBS signal (without truck-side installation) * Rubber coating on the folding ramps and on the approach ramps on the left and right (approx. 860 mm long) * Rubber coating on the longitudinal members from the front to the end cross member * Hardwood flooring on the running surfaces of the low-bed platform * 4 lashing pockets on each side with simultaneous 2-ton lashing capability * La-Si package consisting of: 5 pairs of UVV lashing rings, swiveling and lowering, loadable in all directions and recessed in the outer frame - in the corners 13.4 tons, otherwise 10 tons * 6 pairs of mechanical folding outriggers for a total width of 3 m (but not in the rear ramp) * Log holder under the loading area in the longitudinal direction * Roller stop in front of the front cross member, raised, with 1 x 6.4 ton lashing eye on each side * Hydraulic folding ramps (approx. 4,650 x 720 mm) with hydraulically extendable front section and load-holding valves * Hydraulic lateral ramp adjustment * Hydraulic rear support (single-stage cylinder) * Hydraulic flow divider in the trailer (with hydraulic pump capacity in the truck of over 40 liters to max. 140 liters / min.) * Hydraulics control block, splash-proof * Dual-line hydraulics * Loading area above the turntable: approx. 1,960 x 2,520 mm, * Rear loading area: approx. 6,500 x 2,520 mm (incl. 860 mm approach ramp) * Loading height loaded approx. 890 mm +/- 20 mm air suspension * Chassis, turntable, roller stop, folding extensions & approach ramps hot-dip galvanized * Axles, turntable, drawbar, air reservoir, etc. painted in black * Loading height loaded: approx. 890 mm +/- 20 mm * New vehicle with manufacturer's warranty * Errors and prior sale are subject to change * Delivery from approx. week 45/2026

Condition: new, maximum load weight: 31,630 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 9,250 mm, loading space width: 2,520 mm, Year of construction: 2026, * T 4: * EBS * Emergency release system for spring accumulators Fsdpfxsrczm Do Ah Tspl * Drum brakes * 4 x 11 to. Gigant axles * Parabolic springs * Mech. axle compensation front and rear * Tire pressure monitoring with display option in the truck via EBS signal - without truck-side installation * Warning sign packages front & rear * Reflective contour striping on the sides and rear * EBS multi-voltage system for 12 & 24 V electrical systems * LED rotating beacon (removable) at the rear * 24 V - 15-pin and additionally 12 V - 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm drawbar eye and stepless height adjustment * Toolbox made of powder-coated sheet steel and spare wheel holder in body design, located on the right side * Front, closed, plastic single mudguards * Rear, straight steel mud flaps each with splash protection (spray mist suppression) * Side underrun protection * Extended offset crank extended by 500 mm to the front * Extension of the turntable platform by 520 mm with 45° corners and 3 recessed storage compartments incl. lid and lockable * Chassis made of high-strength fine-grain steel * Floor over the turntable platform made of 50 mm and in the low-bed platform made of 60 mm needle wood * Outer planks of the ramps made of 50 mm bamboo wood * 4 pocket sleeves on each side (but no stanchions present) with simultaneous 2 to. lashing capability * Lasi package consisting of: 2 lashing eyes 6.4 to. at the front left and right on the main frame of the turntable platform, 1 pair of 13.4 to. lashing rings on the outer frame on the front and rear sides, and 4 pairs of 10 to. lashing rings on each side, pivotable and lowerable, loadable in all directions and embedded in the outer frame, 2 pairs of lashing rings 6.4 to. on each side in the excavator arm rest, 8 pairs of galvanized folding outriggers for 3 m total width (but not in the rear slope) * Extension planks stored on the left side in a storage compartment * Excavator arm rest above the rear axle to the end of the approach ramp approx. 2,300 x 740 x 190 mm * Mech. support legs at the rear * Hydr. hot-dip galvanized ramps approx. 3,000 x 720 mm * Hydr. lateral ramp displacement on sliding tube from the ramp shaft * Loading area above the slewing ring: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loading height loaded approx. 860 mm (incl. 860 mm approach ramp) * Chassis, turntable, ramps, mech. folding supports at the rear hot-dip galvanized * Axles, springs, air tanks and slewing ring painted in a black tone * New vehicle with manufacturer's warranty * Errors and prior sale reserved * Immediately available from Egestorf

Condition: new, maximum load weight: 23,940 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profi 30.0 ----Brakes: * EBS braking system * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11-ton Gigant axles ----Suspension: * Parabolic springs with mechanical axle compensation at the rear ----Drawbar: * Drawbar with 50 mm drawbar eye and height adjustment via coil spring & tension lock ----Lighting / Electrical System: * TPMS tire pressure monitoring system * Multi-voltage system * LED tail lights 12 / 24 V * Rotating beacon (removable) at the rear * 15-pin power connector ----General Components: * Side impact protection * Swivel supports at the rear on the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front mudguards made of plastic and rear mudguards made of straight, galvanized steel sheet, each with splash protection * Tool box made of galvanized steel sheet - black powder-coated - approx. 650 x 300 x 600 mm * Hinged lid (hot-dip galvanized) for the tool box in the turntable platform * 4 lashing points on each side (but no lashing bars included) with simultaneous lashing capability ----Load Securing (La-Si package consisting of): * 2 lashing points (6.4 tons) at the front left & right on the main frame of the turntable platform * 6 pairs of UVV lashing rings, swivel and lowerable, loadable in all directions and recessed in the outer frame * 13.4 tons in the corners, otherwise 10 tons ----Widening: * 6 pairs of mechanical folding outriggers for a total width of 3 meters (but not in the rear slope), * Widening boards placed in the middle of the loading area ----Ramps: * Hot-dip galvanized, one-piece hydraulic ramps (approx. 3,000 x 720 mm), mechanically adjustable on the side * 4-way control block for retrofitting of the hydraulic side ramp adjustment ----Loading Area: * above the turntable: approx. 1,960 x 2,520 mm & unladen approx. 1,070 mm * rear loading area: approx. 6,500 x 2,520 mm & unladen approx. 910 mm (incl. 860 mm approach angle) ----Tires: * 235/75 R 17.5 twin tires ----Unladen Weight: * approx. 5,980 kg unladen weight ----Painting: * Chassis, turntable, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks etc. painted in a black shade ----Information: Fsdpfjl Th I Ajx Ah Tjpl * Technically possible gross vehicle weight of 30,000 kg * New vehicle with manufacturer's warranty * Errors and prior sale excepted ----Delivery time: * Immediately available from Egestorf

Condition: used, maximum load weight: 31,000 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 07/2024, loading space length: 9,290 mm, loading space width: 2,520 mm, loading space height: 950 mm, * PT 40.0 Profi ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: Fpjdpfxjl Tlhro Ah Tol * 4 x 11-ton Gigant axles ----Suspension: * Air suspension with lifting and lowering system and rapid drop valve ----Drawbar: * Drawbar with 50 mm drawbar eye and height adjustment ----Lighting / Electrical: * EBS multi-voltage system with 12 & 24 V electrical system * 15-pole power connector * LED lighting system 12 / 24 V * LED rotating beacon (removable) at the rear * 2 LED reversing lights (switched via reverse gear) ----General attachments: * Manometer - pressure gauge for load weight determination (axles separated into 2 air suspension circuits) * Lateral impact guard * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front plastic quarter fenders with splash protection * Rear straight, galvanized steel splash guards with splash protection * Reflective contour strips on the sides and at the rear * Tool box made of galvanized steel sheet, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high ----Low-bed platform: * Extension in front of the turntable platform, approx. 490 mm long with 45° corners * ROBOTER welded anti-slip surface on the steel plate of the turntable platform * Hardwood flooring on the running surfaces of the low-bed platform ----Load securing (La-Si-package consisting of): * 1 x 13.4-ton UVV lashing eye on each side in front of the front bulkhead support * 4 holes on each side in the turntable platform, each with a lashing force of 2 tons * 1 pair of lashing eyes (13.4 tons) hanging at the rear on the left and right in front of the rear crossbeam * 4 pairs of UVV lashing rings (10 tons) on each side, swiveling and lowerable, loadable in all directions and recessed in the outer frame * 3 rung pockets on each side with simultaneous 2-ton lashing option ----Widening package: * Hot-dip galvanized mechanical folding outriggers for 3 m overall width (but not in the rear slope) * Beam holder for widening extensions under the chassis on the left in the longitudinal direction ----Excavator arm rest: * Excavator arm rest above the rear axle up to the end crossbeam, approx. 2,100 mm long and approx. 190 mm deep * 2 pairs of 6.4-ton lashing eyes on each side in the excavator arm rest ----Ramps: * Hydraulic, one-piece ramps (approx. 3,000 x 720 mm) mechanically adjustable on the sides * Outer beams of the ramps made of hardwood * Steel construction as preparation for a 6-way control valve ----Loading height: * Loading edge unladen approx. 950 mm +/- 20 mm ----Tires: * Tires 235/75 R 17.5 ----Paint: * Chassis, turntable, folding outriggers, mechanical support legs, ramps hot-dip galvanized * --Axles, air tanks, drawbar painted in a black tone-- ----Info: * Vehicle has a temporary registration in 07/2024, due to a missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Errors and prior sale are subject to change ----Delivery time: * Immediately available from Egestorf

Condition: used, axle configuration: 2 axles, total width: 25,000 mm, total height: 40,000 mm, Year of construction: 2014, Equipment: ABS, For inquiries regarding the vehicle, Mr. Seidel will assist you (by telephone). MÜLLER MITTELTAL SF32BM/BT Concrete Mixer Semi-Trailer Superstructure: Liebherr HTM 1004 10m³, BPW axles, drum brakes, spring-loaded brakes, Wabco ABS, 1st axle liftable, air suspension, permissible total weight: 32,000 kg, unladen weight: 6,510 kg, payload: 25,490 kg, tire tread depth: 1st axle 14-15mm, 2nd axle 10mm Fpodpfx Ahsyfu Sde Tel Upon request, we can provide you with a leasing or financing offer. Mr. Seidel (tel.) is happy to assist you. Further information can be found on our homepage. ... Subject to errors, changes, and prior sale!!! = Further Information = GVW: 32,000 kg Please contact Tobias Ebert for further information.

Condition: new, maximum load weight: 20,500 kg, overall weight: 27,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, Year of construction: 2026, * ETÜ-TR 27.0 Platform: Fodpfx Ajr Dpzxoh Tspl * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 3 x 9 t BPW Eco axles * Air suspension with lifting and lowering system, with RTR function * 1st axle liftable * Last axle as follower steering axle with electro-pneumatic steering lock via PIN reverse gear (locking of the follower axle from the tractor unit for maneuvering purposes - without truck-side installation - assigned to PIN 10 in the 15-pin connector, for maneuvering purposes only, not for use in public road traffic) * SmartBoard control unit as an infotool, with pressure sensors for total axle load display * Tire pressure monitoring with display option in the truck via EBS signal, no truck-side installation required * Fixed central drawbar with 50 mm flanged towing eye (loaded 900 mm, height adjustment at the head board) * Mechanical landing gear at the front, mechanical swing-down supports at the rear of the chassis * Hydraulic flow divider * Continuous side walls (without center posts) up to the run-on ramp * Rear stanchions foldable * Steel rear wall inserted in front of the rear stanchions * Mechanically adjustable warning sign package at front and rear * Tool boxes made of galvanized sheet steel - black powder coated - approx. 650 x 300 x 600 mm, mounted right side * 15-pin power connector * LED tail lights * Detachable LED rotating beacon incl. bracket and installation * 2 x LED reverse lights at vehicle rear (activated via reverse gear) * Flashing LED side marker lights * 60 mm larch / douglas fir wood floor * 400 mm plug-in steel front wall * Perforated outer frame, approx. 45° angled, with provisions for mounting 3 t folding lashing brackets * In each corner 1 x 10 t lashing ring, as well as 2 x 10 t and 3 x 6.3 t lashing rings per side additionally * Various holes in the front and rear cross members for 1.2 t lashing options * Hydraulic one-piece drive-on ramps, approx. 3,000 x 720 mm, mechanically adjustable sideways * 4-way hydraulic control block for possible retrofit of hydraulic ramp shifting * Chassis, drawbar, front wall, rear manual supports, and drive-on ramps hot-dip galvanized * Axles, air tanks, flanged drawbar eye, and front mechanical landing gear coated in black * Hydraulic flow divider in the trailer (for hydraulic pump output from 40 l to 120 l/min in the truck) * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available from Egestorf

Condition: new, maximum load weight: 30,740 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Year of construction: 2026, * T 4: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Air suspension with lifting and lowering device and RtR valve * SmarD on-board system for load weight determination * Warning sign packages front & rear * Reflective contour tape on sides and rear * Removable rotating beacon at the rear * LED lights * Straight drawbar with 50 mm towing eye and infinitely adjustable height * Tool box made of powder-coated steel and spare wheel holder in basket design, mounted on the right side * Enclosed plastic single fenders at the front * Straight steel mudguards at the rear, each with spray suppression (anti-spray system) * Side underrun protection * Turntable platform extended by 520 mm with 45° corners and 3 integrated storage compartments incl. cover, lockable * Chassis made of high-strength fine-grained steel * Floor over turntable platform made of 50 mm softwood, in the low-bed platform made of 60 mm softwood * Outer planks of the loading ramps made of hardwood * 4 stake pockets on each side (no stakes included) with simultaneous 2 t lashing point per pocket * Load securing package consisting of: 2 lashing points 6.4 t at the front left and right on the main frame of the turntable platform * 2 pairs of 13.4 t lashing rings each at the outer frame front and rear, as well as 4 pairs of 10 t lashing rings per side, swiveling and retractable * Loadable in all directions and recessed into the outer frame * 2 pairs of 6.4 t lashing rings in the excavator arm rest area * 8 pairs of galvanized swing-out marker boards for 3 m total width (not at the rear slope) * Widening planks stored in a compartment on the left side * Excavator arm rest above rear axle up to end of approach ramp approx. 2,100 x 740 x 190 mm * Mechanical drop-down supports at the rear * Hydraulic folding ramps with hydraulically adjustable tip, approx. 4,650 x 720 mm incl. hydraulic lateral ramp shifting and load-holding valve * Loading area across the turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,780 x 2,520 mm * Loading height loaded: approx. 890 mm, +/- 20 mm (incl. 860 mm approach slope) * Flow divider installed * Chassis, turntable, access ramps, flip-out marker boards and mechanical drop-down supports hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in black * Tires: 235/75 R 17.5 * New vehicle without first registration, with manufacturer warranty * Subject to errors and prior sale Fsdpsl Tik Nefx Ah Tepl * Immediately available ex Egestorf on the A7

Condition: new, maximum load weight: 38,620 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, Year of construction: 2026, T5 Profile 50.0: ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm when lifted) * Last axle steerable (locking of trailing axle can be performed from the cab for maneuvering purposes, without installation on the truck side, as well as additionally by switch on the trailer); lock must be disengaged before driving on public roads * Forced lifting and forced lowering of the lift axle for maneuvering purposes (truck-side installation required) with speed-dependent control via the EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: * Drawbar 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as infotool with pressure sensors to display total axle load per axle group * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * LED lighting system 12/24 V * Removable LED beacon (rear) Fpsdoxptn Dspfx Ah Tol ----General Attachments: * Mechanical warning sign package for 3 m total width * Toolbox made of galvanized steel sheet approx. 650 x 300 x 600 mm, mounted left side * Plastic wheel arches front axle and galvanized steel sheet mudguards on rear axle ----Low Loader Platform: * Turntable platform extension with 45° corners and 3 storage compartments with lockable folding lids (lids open to the rear) * Shortened low bed platform by 500 mm to 6,280 mm including extended stepped transition 500 mm forwards * Rubber covering on foldable frame, approach slope, and on the running surface of the low loader platform * Bamboo wood between the longitudinal beams in front of the excavator stick holder ----Load Securing (LaSi Package): * 2 x 6.4 t lashing rings at the front corners * 2 x 13.4 t UVV-compliant lashing points each at the front and rear side corners * 5 x 10 t UVV-compliant lashing rings per side (swiveling and lowerable, loadable in all directions) * 4 stake pockets per side, also 2 t lashing capability * 1 x 16 t UVV-compliant lashing point on the rear cross member ----Widening: * Extendable and foldable widening outriggers for 3 m overall width (board bracket holder under chassis, right side) ----Excavator Stick Holder: * Continuous excavator stick holder with reinforced profile from last axle to end beam, approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV-compliant lashing rings on the sides of the stick holder ----Ramps: * Hydraulic folding ramp with double-acting hydraulics and extendable tip section, approx. 4,650 x 720 mm incl. load-holding valves and hydraulic side shift ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump outputs in the truck above 40 l/min, max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm (via air suspension) ----Loading Area Dimensions: * Deck above turntable: 2,600 + 390 x 2,520 mm * Low bed area: 6,280 + 500 x 2,520 mm incl. 860 mm approach slope ----Paintwork: * Chassis, bogie, drawbar, extension consoles, access ramps hot-dip galvanized * Towing fork, axles, hydraulic axle supports, as well as air tanks painted in black ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: Immediately available*

Condition: new, maximum load weight: 23,700 kg, overall weight: 30,000 kg, axle configuration: 3 axles, Year of construction: 2026, T3 Profi 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring accumulators * Drum brakes ----Axles: * 3 x 11-ton BPW Eco axles ----Suspension: * Air suspension with lift and lower function, controlled by an RtR valve ----Drawbar: * Drawbar with 40 mm drawbar eye and height adjustment via tension spring & locking clamp ----Electrical System / Lighting: * TPMS (tire pressure monitoring system) * Smart-Board as an information tool * LED tail lights 12/24 V * Rotating beacon (removable) at the rear * 15-pole power connector ----General Components: * Side impact protection * Swivel supports at the rear of the chassis frame * Mechanically adjustable warning sign packages at the front and rear * Front mudguards made of closed plastic and rear mudguards made of straight galvanized steel sheet, each with splash protection * Reflective contour strips on the sides and rear * Hinged cover (hot-dip galvanized) for the toolbox in the turntable platform ----Low-loader Platform: * 4 lashing points on each side with simultaneous 2-ton lashing capacity * 6 pairs of mechanical folding outriggers for a total width of 3 meters (but not in the rear slope) * Extension boards placed in the center of the loading area * Hydraulic, one-piece ramps (approx. 3,000 x 720 mm) adjustable on the side ----Load Securing (Load Securing Package): * 2 lashing points (6.4 tons) on the front left and right on the main frame of the turntable platform * 5 pairs of UVV lashing rings, pivotable and lowerable, loadable in all directions and recessed in the outer frame – 13.4 tons in the corners, otherwise 10 tons. ----Excavator Arm Rest: * Approximately 2,100 mm long from the rear axle to the end crossmember (2 pairs of 6.4-ton lashing points on the side in the excavator arm rest) ----Loading Area: * Over the turntable: approx. 1,960 x 2,520 mm * Rear loading area: approx. 6,500 x 2,520 mm (including 860 mm approach ramp) ----Loading Height: * Unloaded: approx. 1,070 mm * Loaded: approx. 910 mm ----Tires: * 235/75 R 17.5 Fpjdpfsl Tpwyox Ah Tjl ----Paint Finish: * Chassis, turntable, drawbar, folding extensions & ramps hot-dip galvanized * Axles, turntable, air tank, etc. painted in a black shade ----Information: * New vehicle with manufacturer's warranty * Errors and prior sale are subject to change * Sample images ----Delivery Time: * Available from approximately week 32/2026

Condition: used, Year of construction: 2010, Vacuum tank approx. 6 m³, suitable for Müller-Mitteltal CHK. Includes PTO-driven vacuum pump as well as various hoses. Vacuum pump = Further information = Fodpfxex Nl Npj Ah Tjpl Please contact Jan-Marc Schwickert for further details.

Condition: new, maximum load weight: 30,440 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, Year of construction: 2026, Equipment: ABS, T 4 Profi 40.0 ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring-loaded cylinders * Drum brakes ----Axles: * 4 x 11-ton Gigant axles ----Suspension: * Air suspension with lifting and lowering system and RtR valve ----Drawbar: * Straight drawbar with 50 mm drawbar eye and stepless height adjustment ----Electrical System / Lighting: * Tire pressure monitoring system with display option in the truck display via EBS signal - without truck-side installation - * SmartBoard as an information tool with pressure sensors for axle load display per axle group * 15-pin power connector * LED rear lights * LED marker lights (removable) at the rear ----General Components: * Warning sign packages at the front & rear * 2 x toolboxes made of galvanized, powder-coated steel sheet, approx. 650 x 300 x 600 mm, on the right side * Closed plastic fender at the front * Straight steel mudguards at the rear, each with splash protection (spray mist suppression) * Lateral impact protection ----Low-bed Platform: * Extension of the turntable platform by 520 mm with 45° corners and 3 recessed storage compartments incl. lids and locking mechanism * Floor over the turntable platform made of 50 mm needlewood, and in the low-bed platform made of 60 mm needlewood * Rubber coating 20 mm instead of wooden floor in the running area with a low-bed length of 6,780 mm including the access ramp * Rubber coating on the access ramp, left and right, approx. 860 mm long * 4 lashing eye pockets on each side (however, no lashing bars included) with simultaneous 2-ton lashing capability ----Chassis: * Chassis made of high-strength fine-grain steel ----Load Securing (Lasi - Package): Turntable Platform: * 2 pairs of 13.4-ton lashing eyes in the outer frame of the turntable platform Low-bed: * 4 pairs of 10-ton lashing eyes on each side of the outer frame, retractable and loadable in all directions * 2 pairs of 13.4-ton swiveling lashing eyes on each side at the rear ----Ramps: * Rubber coating on the folding access ramps * Hydraulic folding ramps with hydraulic extendable front section, approx. 4,650 x 720 mm * Hydraulic lateral ramp adjustment & load holding valves ----Rear Support: * Hydraulic rear support ----Width Extension: * 8 pairs of galvanized folding outriggers for 3 m overall width (however, not in the rear slope) * Width extension boards stored in a compartment on the left side Fpodpoylfvgsfx Ah Tjl ----Excavator Arm Rest: * Excavator arm rest above the rear axle to the end of the access ramp, approx. L=2,100 mm x W=740 x D=190 mm * 2 pairs of 6.4-ton lashing eyes on the side in the excavator arm rest ----Hydraulics: * Hydraulic flow divider in the trailer (with hydraulic pump output in the truck of over 40 - max. 120 l/min.) ----Loading Dimensions: * Rear loading area: approx. 6,780 x 2,520 mm (incl. 860 mm access ramp) * Loading area above the turntable: approx. 2,990 x 2,520 mm ----Loading Height: * approx. 890 mm, +/- 20 mm ----Painting: * Reflective contour striping on the sides and at the rear * Chassis, turntable, access ramps, and folding outriggers hot-dip galvanized * Axles, drawbar, air tanks, and turntable painted in a black color ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Immediately available from Egestorf

Condition: new, Year of construction: 2026, Cable reel transport trailer. Permissible total weight 9,900 kg, payload 7,380 kg. Hydraulic lifting and lowering of the cable reel from the towing vehicle or by a 4-stroke gasoline engine, protective cover, reel drive hydraulically with rubber-coated drive rollers, reel diameter 800-3,000 mm, reel width up to 1,650 mm, centering cones for cable reels. Two-speed support winch at the front, extendable rear support. BPW axle, EBS, parabolic suspension, tires 315-80R22.5, tire pressure monitoring. Tow hitch 40 mm, height-adjustable, 2-line air, lighting 12+24 V LED. Tool box. Vehicle completely hot-dip galvanized. New vehicle including factory warranty. = Further information = Unladen weight: 2,520 kg Payload: 7,380 kg Fpsdpfxszp Dnbo Ah Tel GVW: 9,900 kg Condition of rear tires: 100 Front tires: 315-80R22.5 Rear tires: 315-80R22.5 Country of manufacture: DE Please contact Jan-Marc Schwickert for further information.

Condition: new, functionality: fully functional, tire condition: 100 %, Year of construction: 2025, fuel type: diesel, The fully automatic cable trailer for the technology of tomorrow. The KWH from Müller-Mitteltal is a special vehicle that has been tried and tested for decades. Impressive technology and automatic work processes make it the perfect cable transport and laying trailer. The payload is approx. 6.0t at 8.8t GG. Technical data Single-axle cable transport trailer, motor-hydraulic Structure Swiveling cable drum structure Support Geared support winch at the front, rear with extendable pipe supports, hydraulic rear support on request KWH 8.8 Total weight 8,800 kg Payload 6,000 kg of which drawbar load 800 kg Fpodpfx Ahevvvqfe Tjl Drum diameter 800 - 3,000 mm Clear width between the drum arms 1,700 mm Tires 315 / 80 R 22.5

Condition: used, first registration: 06/2010, loading space length: 11,350 mm, loading space width: 2,500 mm, loading space height: 950 mm, - Steered axle - Remote control - Hydraulic ramps - Upper loading platform 3500 mm - Lower loading platform 7850 mm Fsdpfx Ajx Dzn Ujh Topl

Condition: used, maximum load weight: 29,850 kg, overall weight: 32,000 kg, axle configuration: 2 axles, first registration: 07/2012, next inspection (TÜV): 09/2028, Year of construction: 2012, Internal vehicle number: G300402 Available immediately at our yard in Kaufungen. More information: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Year of manufacture: 2012 Unladen weight of the semi-trailer: 6,530 kg Concrete mixer semi-trailer LIEBHERR 10 m³ Fedpfx Ahexy Ul Se Tspl Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, maximum load weight: 31,820 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 01/1980, loading space length: 9,700 mm, loading space width: 3,000 mm, total width: 2,550 mm, total height: 900 mm, Year of construction: 1980, Equipment: ABS, tail-lift, Müller-Mitteltal T4 Lowboy Trailer * SAF axles with drum brakes * Twin tires * Low platform with extended loading area * Hydraulic loading ramps, adjustable (2 units) * Drive-over gooseneck * Additional supports at the rear * Turntable design ----Dimensions & Loading Area: Loading area approx. 9,800 mm Fodjy Skl Ispfx Ah Tjpl * Loading area width: 2,550 - 3,000 mm * Loading area height: 900 mm ----* Permissible total weight: 40,000 kg * Payload: 31,820 kg * Tires: 235/75R17.5 ----Vehicle number: 11892----Errors and prior sale excepted----Advertisements and various lettering have been digitally removed. -----We will be happy to assist you with all formalities involved in purchasing a vehicle. Just let us know your wishes and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional charge:----Trade-in of your old vehicle, TÜV/SP inspection, complete export processing, assistance with financing, application for export license plates, vehicle transport, vehicle registration, recovery and vehicle transport services. -----?YOUR VTS TEAM

Condition: used, maximum load weight: 23,900 kg, overall weight: 31,000 kg, axle configuration: 2 axles, first registration: 06/2007, Year of construction: 2007, Internal vehicle number: G400178 Available immediately at our yard in Kaufungen More information: Luis Lucena Viktoria Sologubova Müller-Mitteltal TS2 KOMPAKT low-loader trailer – 2 axles – hydraulic ramps Robust Müller-Mitteltal TS2 KOMPAKT low-loader trailer from 2007. This 2-axle trailer features hydraulic loading ramps, air suspension, and a payload capacity of 23,900 kg. With a permissible gross weight of 31,000 kg, it is ideally suited for transporting heavy construction and industrial machinery. Technical data: * Vehicle number: G400178 * Vehicle condition: Used * Category: Low-loader trailer * Manufacturer: Müller-Mitteltal * Model: TS2 KOMPAKT * First registration: 06/2007 * Year of manufacture: 2007 * Axles: 2 * Permissible gross weight: 31,000 kg * Unladen weight: 7,100 kg * Payload: 23,900 kg Fsdpfxozahg Do Ah Tspl * Overall length: 10,800 mm * German vehicle Equipment: * Hydraulic loading ramps * Air suspension * 2-axle chassis * Robust low-loader design Inspection and functional testing possible by prior appointment. Further information, photos, and videos are available upon request. Subject to errors, changes, and prior sale. We will gladly accept your used vehicle as part of the payment. Financing directly with us is possible. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: new, maximum load weight: 37,560 kg, overall weight: 48,000 kg, axle configuration: 3 axles, Year of construction: 2026, * TS 3 RM ML 30.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 3 x 11 t BPW axles * Start-assist for shunting purposes activated on the first axle via EBS (without truck-side installation) * Last axle is a trailing steered axle with electro-pneumatic steering lock * Trailing axle lock for shunting purposes activated from the cab via EBS (without truck-side installation) ----Suspension: * Air suspension with lifting and lowering function plus RtR valve Fodpfxsykx Nko Ah Tjpl ----Electrics / Lighting: * Smart-Board information panel mounted on the trailer with pressure sensors for total axle load display * 15-pin power connector * LED lighting 12 / 24 V * Removable LED warning beacon at the rear * 2 additional LED reversing lights * 7-pin socket at the rear for overlength lighting * Side marker lights with indicator circuit * Tire pressure monitoring with display option in truck via EBS signal (without truck-side installation) ----General Attachments: * Side underrun protection * Landing gear at front plus rear swing-down supports on the chassis * Straight steel mudguards * Spare wheel holder in front of the bulkhead crossmember (without spare wheel) * Mechanically adjustable warning sign kits at front and rear * Swivel arm as a carrier for connection cables from truck to trailer ----Low Loader Deck: * Second king pin position * Saddle platform with 45° chamfered front corners and front toolbox made of galvanized, powder-coated sheet steel (W = 2,480 x H = 500 x L = 665 mm) with hinged lid * 400 mm high aluminum drop sides (painted in RAL color of choice) on saddle platform, foldable and removable * Removable rear wall -150 mm high * Rear slope at saddle platform to low bed approx. 700 mm long with chequer plate covering, as well as lashing bar with holes for attaching aluminum loading ramps * Saddle platform with 50 mm clamped timber planks and low bed platform with 60 mm clamped timber planks * Tread plate above the axles * 9 mechanical folding extensions to 3 m total width (not over rear slope; extension planks available, with closed transverse storage compartment under loading area) * Prepared for 3 mounting slots under saddle platform for storing optional aluminum loading ramps or timber planks for wheel well covers * Prepared for container locks on gooseneck ----Load Securing (LaSi Package): Saddle platform: * Perforated outer frame with 45°-angled holes for lashing points (2 t lashing force per point, minimum 480 mm apart) * 3 x 13.4 t lashing rings recessed into the floor on each side (one on the saddle platform, one on the longitudinal beams after the step, one over the middle axle next to the beam) Low Loader Platform: * 3 x 13.4 t lashing rings on the outer frame on each side (beginning of platform step, start and end of ramp slope) * 2 x 10 t lashing rings per side (between front wheel recess and 1st axle, between 2nd and 3rd axle) * 3 x 5 t lashing rings per side, bolted to the outer frames of the wheel recesses (2 at the front, 1 at the rear wheel recess) ----Excavator Arm Trough: * Extended excavator arm trough from the end of the last rigid axle over the steering axle up to the end crossmember, continuous with internal reinforcement, approx. W = 770 mm x Depth (rear ...

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, permissible axle load (axle 3): 10,000 kg, first registration: 10/2013, total width: 2,750 mm, Year of construction: 2013, Müller Mitteltal ITS-VLL 30.0 Profi Lowboy Trailer | 3-axle | Hydraulic lowboy platform | 48 t permissible total weight | 275 cm wide The extremely robust and stable Müller Mitteltal ITS-VLL 30.0 Profi lowboy trailer is ideal for transporting machinery, construction equipment, and heavy loads. It is known for its robust construction and reliability. Technical data: Make: Müller Mitteltal Type: ITS-VLL 30.0 Profi Chassis number (VIN): WMM00000D0057250 Permissible total weight: 48,000 kg Axle configuration: 3 axles Axle loads: Axle 1: 10,000 kg Axle 2: 10,000 kg Axle 3: 10,000 kg Permissible roll-on load: 18,000 kg Loading platform: Low loading platform (lowboy design) Loading ramps: hydraulically operated Low loading platform: hydraulically adjustable (up/down) Tires: in good condition Construction: All-steel chassis Maximum speed: 80 km/h Design & Options: Heavy-duty lowboy design Hydraulically adjustable low loading platform (up/down) Hydraulic rear loading ramps Wide (275 cm) and stable loading platform Suitable for excavators, rollers, cranes, etc. Robust construction, ready for immediate use Condition: The trailer is used but functional and shows signs of wear and tear consistent with its age and use. Technically, it is a robust and reliable machine transporter. Ready for immediate use – ideal for transport companies and construction firms. For further information or to arrange a viewing, please contact us. Fpjdpfezmr Tyox Ah Tol = Further Information = Axle configuration Rear axle 1: Dual tires; Max. axle load: 10,000 kg; Steerable Rear axle 2: Dual tires; Max. axle load: 10,000 kg; Steerable Rear axle 3: Dual tires; Max. axle load: 10,000 kg; Steerable Weights Unladen weight: 14,500 kg Payload: 33,500 kg GVWR: 48,000 kg Maintenance, history, and condition APK (Technical inspection): valid until 02/2027 Technical condition: very good Optical condition: very good Financial information Price: On request Further information Please contact Klaas Gerrits, Henk Gerrits, or Mr. Gerrits for further information.

Condition: used, maximum load weight: 32,500 kg, overall weight: 43,000 kg, axle configuration: 3 axles, first registration: 10/2022, next inspection (TÜV): 12/2026, loading space length: 13,700 mm, loading space width: 3,000 mm, Year of construction: 2022, Equipment: ABS, Stock No. 5869 13.70m Müller-Mitteltal low-loader semi-trailer / 4.70m long hydraulic ramps / steered / loading height 0.89m ----* Manufacturer: Müller-Mitteltal * Type: TS 3 RM 30,0 - Low-loader * First registration: 10/2022 * Gross weight: 43,000 kg * Unladen weight according to vehicle registration document: 10,500 kg * Payload: 32,500 kg * Axles: 3x BPW axles / 3rd axle with trailing steering / drum brakes * Suspension: Air suspension with raising and lowering function * Tires: 235/75 R 17.5 approx. 60% remaining / twin tires * EBS Wabco * Color: Chassis galvanized / sides painted blue * Overall length approx. 13.70m x 2.50m wide (+0.050m) * 2 split hydraulic ramps approx. 4.70m long x 0.72m wide * Ramps made of steel/wood/rubber * Wheel recesses approx. 0.39m deep * Dimensions of the low bed: approx. 8.50m long + can be widened to 3.00m * Loading height approx. 0.885m * Low bed flooring: wood/steel * Dimensions of the gooseneck: approx. 2.50m long x 2.48m wide with approx. 0.40m aluminum sideboards * Center of kingpin to the rear approx. 12.55m * Low bed flooring: wood/steel * Large tool box at the front of the gooseneck * Extendable warning signs at the front and rear * 3 pairs of lashing points in the gooseneck * 5 pairs of lashing points on the side of the low bed * 5 lashing points in the excavator arm recess * Full load support legs * Mechanical support legs at the rear * Rotating beacon at the rear Fpedjzz Uwqepfx Ah Tjl * LED reversing lights * LED work lights * 1st owner German semi-trailer !! German documents !! 1st owner !! Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, isolated errors may have crept into the text or the details. We assume no liability for errors, changes or interim sales. All information is without guarantee. Please contact us to verify details or clarify any further questions.

Condition: like new (used), functionality: fully functional, machine/vehicle number: WMM000000L0066323, empty load weight: 2,980 kg, maximum load weight: 7,020 kg, overall weight: 10,000 kg, axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, loading space length: 5,350 mm, loading space width: 2,450 mm, loading space height: 800 mm, total length: 7,498 mm, total width: 2,550 mm, tire condition: 95 %, color: white, trailer brake: trailer braked, Year of construction: 2021, Equipment: ABS, Like-new trailer Sold as is / no warranty Includes ramps Errors and prior sale excepted! Fpjdpfxjyt Igkj Ah Tol The information in this advertisement is a non-binding description and does not constitute guaranteed features. The seller assumes no liability for typographical or data transmission errors. Listed equipment must be checked separately. All information in the advertisements is non-binding!

Condition: used, axle configuration: 2 axles, loading space volume: 10 m³, total length: 7,500 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2012, Applicable material: Concrete Empty weight: 6.530 kg Carrying capacity: 25.470 kg Fedpfx Ahex Utq Ss Tjpl GVW: 32.000 kg Tyre size on axle 1: 385/65 R22,5 Brake type on axle 1: drum Tyre size on axle 2: 385/65 R22,5 Tyre size on axle rear: 385/65 R22,5 Concrete mixer brand: Liebherr

Condition: used, axle configuration: 2 axles, first registration: 04/2005, color: black, Year of construction: 2005, Equipment: ABS, = Additional options and accessories = - Spare wheel - Twin wheels = More information = Fjdpoxw T Uasfx Ah Tepl Weights Empty weight: 8.900 kg Carrying capacity: 26.100 kg GVW: 35.000 kg Financial information Selling price: € 18.000, US$ 20.840 Other information Brake type on axle 1: drum Make of axle 1: BPW Suspension on axle 1: air Brake type on axle 2: drum Make of axle 2: BPW Suspension on axle 2: air Brake type on axle rear: drum Make of axle rear: BPW Suspension on axle rear: air Chassis: steel Purchase on credit is possible: Yes Purchase by installments is possible: Yes Leasing is possible: Yes

Condition: used, machine/vehicle number: 110, empty load weight: 8,320 kg, maximum load weight: 31,680 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 05/2008, loading space length: 10,300 mm, loading space width: 2,550 mm, suspension: steel, tire size: 235/75 r17,5, wheelbase: 6,500 mm, color: blue, Equipment: ABS, * Drum brake * 4 axles * Wheelbase 6,500 mm * Hydraulic ramp length 2,850 mm - width 650 mm * Loading edge height 920 mm Fodpfx Ajlpav Ush Tepl * Can be widened to 3 m Errors and omissions excepted.

Condition: used, maximum load weight: 7,700 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 08/1979, next inspection (TÜV): 07/2027, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, total width: 2,350 mm, total height: 1,650 mm, Equipment: tail-lift, Müller MItteltal KA-TA * Tandem three-way tipper * Heavy-duty trailer * First registration: 08/29/1979 * Next inspection: 07/2027 * Gross vehicle weight: 10,500 kg * Tare weight: 2,800 kg * Payload: 7,700 kg * Overall dimensions: 6,200 mm x 2,350 mm x 1,650 mm * Internal dimensions: 4,500 mm x 2,200 mm x 500 mm * Side walls painted * Air brake system * Steel side walls, rear section can be folded down, removable, and pivoting * 2 supports at the rear * Support wheel ATTENTION!!!!! PLEASE READ CAREFULLY!!!!! We expressly reserve the right to sell the item in the meantime, as we are also offering it on other platforms. We strongly recommend an inspection and assessment to ensure that the buyer does not have any incorrect expectations regarding the condition and suitability of the item. Inspections and assessments are possible and expressly welcome at any time by prior appointment!!! Illustrations are similar and may include optional accessories that incur an additional charge. The specified internal dimensions are approximate. Fsdszn E Uyjpfx Ah Topl Information without guarantee! Errors and omissions excepted! TRADE-INS POSSIBLE FOR ALMOST ANYTHING!!! EXCHANGE DEALS AND PAYMENT PLANS POSSIBLE!!! Exhibition grounds: 58285 Gevelsberg, Am Sinnerhoop 17 Opening hours: Monday - Friday 8:30 a.m. to 5:00 p.m., Saturday 8:30 a.m. to 2:00 p.m. Over 500 trailers in stock!!! Pegasus Anhänger GmbH Am Sinnerhoop 17 58285 Gevelsberg Tel.: Fax: