Used Müller-Mitteltal Special Purpose Trailers for sale (250)

Condition: new, maximum load weight: 10,760 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic Braking System (EBS) Iasdpfx Aeq Dyvvof Sjn * Emergency release device for spring brake cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (300 mm adjustment range) * Drawbar extension by 250 mm to a total length of 2,250 mm * 40 mm flange towing eye ----Lighting / Electrics: * TPMS (Tyre Pressure Monitoring System) * LED lighting ----General Accessories: * Jost landing gear at the front * Externally mounted, hot-dip galvanized folding supports at the rear * Plastic toolbox mounted front right, outside on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood flooring * Preparation in front of the bulkhead for retrofitting container locks * Bolted smooth sheet steel bulkhead * Foldable side walls made of trapezoidal steel plate with drop-side lift assist * Steel rear wall, insertable between the ramps - storage bracket located inside, in front of the bulkhead when not in use * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Optional installation of 3 t drop lashing points every 600 mm * 1 x 6.3 t lashing rings in each front and rear corner * Various holes in front and rear end crossmembers for 1.2 t lashing options ----Ramps: * Single-piece mechanical grid ramps with spring mechanism for one-person operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Rear drive-on angle approx. 860 mm ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, access ramps, and rear wall * Side wall color in RAL 9010 pure white * Painting of side walls in other RAL colors available at extra cost ----Information: * --Reinforced and certified body according to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer warranty * Subject to errors and prior sale ----Delivery time: * Available from CW 08/2026

Condition: new, maximum load weight: 10,760 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2026, * ETÜ-TA-R 14.4: ----Brakes: * Drum brakes * Electronic brake system (EBS) * Emergency release device for spring-loaded cylinders ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange towing eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED lighting ----General Attachments: * Jost landing gear front * Externally mounted, hot-dip galvanized folding supports rear * Plastic toolbox, front right, mounted externally on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood floor * Preparation in front of the bulkhead for subsequent installation of container locks * Screw-fastened bulkhead of smooth sheet metal * Side walls made of trapezoidal steel sheet, drop-down with drop side spring lifter * Steel tailgate, retractable between ramps – rack for idle position mounted inside on the bulkhead * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° angled, with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings possible every 600 mm * Each front and rear corner equipped with 1 x 6.3 t lashing ring * Various holes in the front and rear crossmembers for 1.2 t lashing options ----Ramps: * One-piece mechanical grid ramps with spring unit, suitable for single-person operation, approx. 2,750 x 600 mm (can be telescoped down to 20 mm) * Approach bevel at the rear approx. 860 mm Iodpfx Afexglh Rs Sjan ----Paintwork: * Hot-dip galvanized chassis, drawbar, bulkhead, access ramps and rear wall * Drop side colour in RAL 2011 deep orange * Painting of side walls in any RAL colour available at extra cost ----Info: * -- Reinforced and certified superstructure according to EN 12642 XL incl. load securing certificate -- * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available from week 08/2026

Condition: new, maximum load weight: 31,630 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 9,250 mm, loading space width: 2,520 mm, * T 4: * EBS (Electronic Braking System) * Emergency release system for spring-loaded cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle equalization front and rear * Tire pressure monitoring with in-cab display via EBS signal – no truck-side installation required * Warning sign packages front & rear * Reflective contour tape on sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable LED beacon (rear) * 24 V - 15-pin and additional 12 V - 7+4-pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and infinitely adjustable height * Tool box made of powder-coated steel sheet, and basket-style spare wheel holder on the right side * Front closed plastic single mudguards * Rear straight steel mud flaps each with spray suppression * Side underrun protection * Offset cranked drawbar extended by 500 mm to the front * Turntable platform front extension by 520 mm with 45° corners and 3 recessed lockable storage compartments with lids * Chassis made of high-strength fine-grain steel * Floor above turntable platform 50 mm softwood, low-bed platform 60 mm softwood * Outer boards of ramps made from 50 mm bamboo Iaodpfxol Th Evj Af Ssn * Four stake pockets on each side (stakes not included), each with 2 t lashing capacity * Lashing package consisting of: 2 lashing eyes 6.4 t front left and right on main frame of turntable platform, one pair of 13.4 t lashing rings at front and rear on outer frame, four pairs of 10 t swivel and lowerable lashing rings per side, loadable in all directions and recessed into outer frame, two pairs of 6.4 t lashing rings on the side in the excavator arm rest area, eight pairs of galvanized folding outriggers for 3 m total width (not at rear slope) * Side extension boards stored on the left in a storage compartment * Excavator arm tray above rear axle to end of rear slope, approx. 2,300 x 740 x 190 mm * Mechanical drop-down supports at the rear * Hydraulic, hot-dip galvanized ramps approx. 3,000 x 720 mm * Hydraulic side ramp shift on slide tube from ramp shaft * Loading platform above turntable: approx. 2,990 x 2,520 mm * Rear loading platform: approx. 6,280 x 2,520 mm * Loading height loaded approx. 860 mm (incl. 860 mm rear slope) * Chassis, turntable, ramps, mechanical rear support legs all hot-dip galvanized * Axles, springs, air tanks, and turntable painted black * New vehicle with manufacturer’s warranty * Subject to errors and prior sale * Available from week 21 / 2026

Condition: new, maximum load weight: 13,490 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, * TRA-Kombi 18.0: * TPMS (Tire Pressure Monitoring System), display option in the truck via EBS signal (no truck-side installation required) * EBS-E (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 2 x 10.5-ton axles * Air suspension with manual lowering at the rear * Pneumatically lowerable towing bar, 2,100 mm long with 40 mm towing eye and height adjustment device * Powder-coated steel toolbox and spare wheel holder in basket design mounted on the right side * Reflective contour tape on sides and rear * Enclosed side underrun protection * Plastic quarter mudguards with spray protection Iasdpfxowb Rako Af Sen * Plastic rear impact bumpers * Foldable A-sign at the rear * LED tail lights * 15-pin power connector * Hot-dip galvanized main frame with raised outer rails to guide roller containers * Steel floor with recessed rollers in the bogie area * For roll-off container transport, container lengths from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking system and mechanically insertable stop brackets at the front in the track * Load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Eight removable skip stops for lateral centering, the front four are pinned with pendulum stops * Three pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and friction-locked securing of the skips, four cloverleaf lashing bars each side, and one pair of 13.4 t UVV lashing rings at the front * Load securing package with additionally four 8 t lashing eyes each side integrated into the outer frame * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * Weld bead as anti-slip coating in the ramp area * Mechanical drop supports at the rear * Aluminium approach ramps (10.6 t / pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) * --Permissible total weight technically possible: 20,000 kg-- * New vehicle without initial registration, with manufacturer’s warranty * Errors and prior sale excepted * Immediately available from Egestorf

Condition: new, maximum load weight: 31,630 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, loading space length: 9,250 mm, loading space width: 2,520 mm, * T 4: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes * 4 x 11 t Gigant axles * Parabolic springs * Mechanical axle equalization front and rear * Tire pressure monitoring with display functionality in the truck via EBS signal (no truck-side installation required) * Warning sign packages front & rear * Reflective contour markings on the sides and rear * EBS multi-voltage system for 12 & 24 V electrics * Removable LED beacon at rear * 24 V 15-pin power cable, additionally 12 V 7+4 pin power cable * Extended connection cables for agricultural and forestry tractors * LED lighting * Straight drawbar with 40 mm towing eye and infinitely adjustable height * Powder-coated steel toolbox and basket-type spare wheel holder mounted on the right side * Closed single plastic mudguard at the front * Straight rear steel spray suppression mudguards, including spray suppression * Side underrun protection * Extended offset bend, 500 mm forward * Turntable platform extension, 520 mm with 45° corners and 3 recessed, lockable storage compartments with lids * Chassis made of high-tensile fine-grain steel * Deck over turntable platform: 50 mm softwood, low-bed platform: 60 mm softwood * Outer boards of ramps: 50 mm bamboo * 4 stake pockets per side (stakes not included), double as 2 t lashing points Iaedpfxorczm Do Af Sen * Load securing package includes: 2 lashing eyes (6.4 t) front left & right on main frame of turntable platform; 1 pair each side front & rear (13.4 t) lashing rings on outer frame; 4 pairs per side (10 t) swingable/drop-down multi-directional lashing rings inlet into outer frame; 2 pairs (6.4 t) on excavator arm support; 8 pairs galvanized folding widening brackets for up to 3 m overall width (not in rear slope) * Widening timbers stored in lateral compartment on left side * Excavator arm support above rear axle to end of drive-on slope approx. 2,300 x 740 x 190 mm * Mechanical rear drop-down support legs * Hydraulic, hot-dip galvanized ramps approx. 3,000 x 720 mm * Hydraulic lateral ramp shift via sliding tube on ramp shaft * Deck above turntable: approx. 2,990 x 2,520 mm * Rear loading area: approx. 6,280 x 2,520 mm * Loading height loaded: approx. 860 mm (including 860 mm drive-on slope) * Chassis, turntable, ramps, rear mechanical drop-down supports are hot-dip galvanized * Axles, springs, air tanks, and turntable painted in black * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Available from KW 21 / 2026

Condition: used, maximum load weight: 28,700 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 09/2013, next inspection (TÜV): 09/2026, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately or at short notice, on our website. Excerpt from the equipment list. Full equipment details available on request. * Excavator bucket well, approx. 2,800 x 770 x 280 mm * 2-piece hydraulic ramps, approx. 2,100 x 2,100 x 700 mm, hydraulically adjustable * Hydraulic rear supports * Hydraulic lifting bed, approx. 4,020 mm long Iedpfx Afsx Tx Els Ssan * Partial rubber coating on the loading area and ramps * Drive-over plate for ramps * Extendable loading area * Wabco Smartboard * Air suspension with lifting and lowering function * 2 work lights on the ramps * Hydraulic connections for the towing vehicle * 15-pin socket + ABS * 50 mm towing eye * BPW axles * Gooseneck with wooden cover * Storage box with lid integrated in the gooseneck

Condition: new, maximum load weight: 10,400 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * ETK-TA-R 14.4: Iajdpfxjtr Suco Af Sjn ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring brake cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer unit ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar, adjustable by 300 mm with 40 mm flange drawbar eye ----Electrics / Lighting: * Tyre pressure monitoring with display option in the truck via EBS signal, no truck-side installation required * 15-pin power connector * LED tail lights ----General Attachments: * Mechanical support winch at front * 2 mechanical folding supports at rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Bolted underrun protection * Plastic quarter mudguards ----Frame: * Main frame made of fine-grain steel ----Tipping Platform: * Net hooks on the sides and rear at the central locking brackets as well as 2 hooks on the front wall * Steel pallet two-way tipper structure; fixed front wall made of smooth sheet, continuous drop sides (foldable without central stanchions, equipped with drop side spring keepers) and pendulum function via manual central locking * Removable rear stanchions (bolted) * Steel rear panel inserted in front of the ramps * Each corner equipped with 1 x 5 t lashing point plus 4 x 3 t lashing rings integrated in the outer frame on each side * 4 mm floor made of fine-grain steel ----Ramps: * Two-part mechanical grating loading ramps with aluminium tip section, 2,150 + 1,300 mm x 600 mm (manually retractable to a total of 80 mm) ----Paintwork: * Chassis, drawbar, rear stanchions, underrun protection, mechanical supports, and loading ramps hot-dip galvanized * Axles, springs, air tanks, flange drawbar eye, and support winch painted in black tone * Drop sides and platform in RAL 9010 pure white * Painting of the side walls and tipping platform in a RAL color shade available at extra cost ----Notes: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: * Available from calendar week 07/2026

Condition: new, maximum load weight: 10,400 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2026, * ETK-TA-R 14.4: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-actuated cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalizer assembly ----Drawbar / Flange Drawbar Eye: * Height-adjustable drawbar (range 300 mm) with 40 mm flange drawbar eye ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck via EBS signal, no truck-side installation required * 15-pin power connector * LED tail lights ----General Attachments: * Mechanical landing gear at the front * Two mechanical folding supports at the rear * Plastic toolbox approximately 750 x 350 x 300 mm, mounted on the right side * Bolted underrun protection * Plastic quarter mudguards ----Frame: * Main frame made of high-tensile fine-grained steel ----Tipping Platform: * Mesh hooks on the sides and rear at the central locking mounts, plus 2 hooks on the front wall * 2-way steel pallet tipper body with fixed smooth sheet metal front wall, continuous drop sides – foldable without center posts with board lifting springs, and swinging via manual central locking * Rear posts bolted * Steel rear wall inserted in front of the ramps * Each corner with 1 x 5 t lashing point, and 4 x 3 t lashing rings embedded in the outer frame on each side * 4 mm floor made of high-tensile fine-grained steel ----Ramps: * Two-part mechanical mesh drive-up ramps with aluminum tip section, 2,150 + 1,300 mm x 600 mm (can be manually slid together to 80 mm) ----Paintwork: * Chassis, drawbar, rear posts, underrun protection, mechanical supports, and ramps hot-dip galvanized * Axles, springs, air tanks, flange drawbar eye, and landing gear painted in black * Sideboards and platform in RAL 9010 pure white * Paintwork of sidewalls and tipping platform in any RAL color available at extra cost ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: Iasdpfjtr St Usx Af Sjn * Available from week 07/2026

Condition: new, maximum load weight: 10,750 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: ----Brake system: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with compensation unit ----Drawbar / Flange towing eye: * Drawbar height adjustable by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange towing eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin electrical connector * LED lighting ----General attachments: * Support winch at the front * External folding support legs at the rear * Plastic toolbox approx. 858 x 500 x 500 mm, mounted outside front right on the front wall * Side underride protection * Plastic quarter mudguards ----Low-loader deck: * 50 mm softwood flooring * Pre-fitted fixtures on the front wall and at the rear incline for subsequent installation of container locks for transporting 20" containers * Bolted front wall made from smooth sheet metal * Side walls made of folded steel sheet – trapezoidal profile – foldable, split once in the centre Ijdsv D Tcbjpfx Af Ssan * Rear wall made of steel, can be slid in between the ramp holders, stowed inside in front of the front wall when not in use * Rear stanchions bolted ----Load securing: * Perforated outer frame bent to approx. 45 degrees with 2 t lashing capacity every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible * 1 x 6.3 t lashing ring in each front and rear corner * Several holes in the front and rear cross members for 1.2 t lashing points ----Ramps: * One-piece mechanical mesh-access ramps with spring mechanism for single-person operation, approx. 2,750 x 600 mm (collapsible to 20 mm) * Rear approach angle approx. 860 mm chassis ----Wheelbase: * Wheelbase 1,140 mm ----Paint finish: * Drawbar, front wall, tailgate, folding supports and access ramps hot-dip galvanized * Axles, springs, air tanks, flange towing eye, and support winch painted in black * Side boards painted RAL 9010 pure white * Side walls can be painted in a RAL colour of your choice at extra cost ----Information: * Reinforced and certified body according to EN 12642 XL incl. load securing certificate * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately from Egestorf at the A7

Condition: new, maximum load weight: 10,750 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 14.4: ----Brake System: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Drawbar / Flange Eye: * Drawbar adjustable in height by 300 mm * Drawbar extension by 250 mm to 2,250 mm * 40 mm flange towing eye ----Electrical / Lighting: * RDÜ tire pressure monitoring * 15-pin electrical connector * LED lighting ----General Attachments: * Landing gear front * External folding supports, rear * Plastic toolbox approx. 858 x 500 x 500 mm, front right on the front wall * Side underrun protection * Plastic quarter mudguards ----Low-loader Platform: * 50 mm softwood flooring * Preparation in front of the bulkhead and rear slope for subsequent installation of container locks for transporting 20" containers * Bolted front wall made of smooth sheet metal * Fold-down side walls made of trapezoidal steel sheet, split once in the middle * Removable steel rear wall, can be stowed inside at the front wall when not in use (between ramp holders) * Bolted rear stanchions ----Load Securing: * Perforated outer frame, approx. 45 degrees angled, with 2 t lashing force every 480 mm * Option to install 3 t drop lashing brackets every 600 mm * 1 x 6.3 t lashing ring at each front and rear corner * Various holes in the front and rear crossbeam for 1.2 t lashing options ----Ramps: * One-piece mechanical grid ramps with spring assistance for single-person operation, approx. 2,750 x 600 mm (can be collapsed to 20 mm) * Approach ramp at rear approx. 860 mm chassis ----Wheelbase: * Wheelbase 1,140 ----Paintwork: * Drawbar, front wall, tailgate, folding supports and ramps hot-dip galvanized * Axles, springs, air tanks, flange towing eye and landing gear painted black * Side boards painted RAL 9010 pure white * Side walls available in custom RAL color at extra charge ----Information: * Reinforced and certified body according to EN 12642 XL, including load securing certificate * New vehicle with manufacturer's warranty Iaedpev Eq Evsfx Af Sjn * Subject to errors and prior sale ----Delivery time: * Available immediately from Egestorf on the A7

Condition: new, maximum load weight: 8,620 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2024, * KA-TA-R 11.9: ----Brakes: * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable (up to 300 mm) hot-dip galvanized drawbar with 40 mm flanged towing eye ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * LED rear lights ----General Attachments: * Jost mechanical landing gear at the front * Two mechanical hot-dip galvanized folding supports at the rear * Galvanized steel toolbox, right-hand side * Hot-dip galvanized bolted underrun protection * Galvanized steel toolbox, right-hand side * Plastic quarter mudguards ----Tipper Body: * Mesh hooks on the sides and rear at the central locking mounts plus 3 at the front wall * Hot-dip galvanized chassis * Steel pallet 3-way tipper body * Continuous drop sides, foldable without centre stanchions, with drop side spring assist * Foldable and swinging tailgate via manual central locking * Hot-dip galvanized, bolted rear stanchions * 4 mm steel floor plate Iasdem Angvspfx Af Sen * Preparation for subsequent fitting of side extensions * 5.5 meter long body ----Load Securing: * One 5 t lashing ring at each corner * Plus four 3 t recessed lashing rings per side in the outer frame ----Ramps: * Rear mounting rail for approach ramps * One pair of aluminum approach ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Rear lockable storage compartment recessed under body in chassis ----Wheelbase: * Wheelbase: 990 mm ----Tyres: * Tyres: 235/75R17.5 ----Paintwork: * Axles, springs, air tanks, drawbar and landing gear painted in black * Tipper body painted in RAL 9010 pure white * Painting of side walls and tipper body in any RAL color available for additional cost ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle without initial registration, with manufacturer's warranty * Subject to errors and prior sale ----Delivery Time: * Available immediately from Egestorf on the A7

Condition: new, maximum load weight: 8,620 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,500 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2024, * KA-TA-R 11.9: ----Brakes: * Electronic Braking System (EBS) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axles ----Suspension: * Parabolic springs with tandem equaliser unit ----Drawbar / Flange Eye: * Height-adjustable, hot-dip galvanised drawbar, adjustable by 300 mm, with 40 mm flange eye ----Electrics / Lighting: * Tire Pressure Monitoring System (TPMS) * 15-pin power connector * LED tail lights ----General Attachments: * Jost mechanical landing gear at the front * Rear: 2 mechanical, hot-dip galvanised folding support legs * Tool box made of galvanised sheet steel, mounted on the right side * Hot-dip galvanised, bolted underrun protection * Plastic quarter mudguards ----Tipper Platform: * Net hooks on the sides and rear integrated into the central locking brackets, plus 3 hooks on the front wall * Hot-dip galvanised chassis * 3-way tipping steel platform for pallets * Continuous drop sides without intermediate stanchions, foldable with drop side spring loaders * Rear drop gate can be folded down or operated in pendulum mode via manual central locking * Bolted, hot-dip galvanised rear stanchions * 4 mm steel floor plate * Prepared for retrofitting of drop side extensions * 5.5 metre-long platform ----Load Securing: * Each corner fitted with 1 x 5 t lashing ring * 4 x 3 t lashing rings integrated into the outer frame on each side ----Ramps: * Rear guide rails for loading ramps * 1 pair of aluminium loading ramps, approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tyred and tracked vehicles * Lockable storage compartment under the loading area at the rear, integrated into the chassis ----Wheelbase: * Wheelbase: 990 mm Iasdpfx Afjl Thx Ej Sen ----Tyres: * Tyres: 235/75R17.5 ----Paintwork: * Axles, springs, air tanks, drawbar and landing gear painted in a shade of black * Platform superstructure colour: RAL 9010 pure white * Painting of the side walls and tipping platform in an RAL colour tone available at extra cost ----Information: * Reinforced superstructure with load securing certificate according to EN 12642 XL * New vehicle without initial registration, with manufacturer’s warranty * Errors and prior sale excepted ----Delivery Time: * Available immediately ex works Egestorf (A7 motorway)

Condition: used, maximum load weight: 13,520 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 04/2022, loading space length: 5,000 mm, loading space width: 2,380 mm, loading space height: 850 mm, loading space volume: 10 m³, total width: 2,550 mm, total height: 2,450 mm, Year of construction: 2022, Equipment: ABS, Müller-Mitteltal Tandem Three-Way Tipper VIN: JZ411728 Chassis / Attachments: * Air suspension * 2 x GIGANT axles with drum brakes * Tyres: 385/65 R 22.5 * Remaining tyre tread: front approx. 20%, rear approx. 60/40% * Underrun protection * Jost landing leg * Cranked drawbar with entry step * Front standing platform Body: * Three-way tandem tipper * Dimensions (L x W x H): 5m x 2.38m x 0.85m, approx. 10m³ * Rolling tarp * Rear pendulum tailgate with 2x hook locks * Left pendulum tailgate with spring assist (2 springs) * Right pendulum tailgate, swingable * Standing platform with access ladder * 4 lashing eyes per side * EN 12642XL * Rolling tarp * Approx. 10 m³ volume Weights: * Gross weight: 18,000 kg * Payload: 13,520 kg * Unladen weight: 4,480 kg Miscellaneous: * German registration * 1 previous owner New roadworthiness inspections, safety checks, or changes to the permitted weight (downgrades/upgrades) available on request. We are happy to assist you in obtaining export/transfer license plates, and domestic transportation of your purchased vehicles within Germany is also possible. Contact us! --- We speak the following languages: German, English, and Russian! --- No liability for printing and typographical errors, subject to alterations, prior sale, and mistakes! --- Who are we? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. With many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. Leible Nutzfahrzeuge has particular expertise in the distribution of new and used commercial vehicles. Our 11,000 m² premises feature a wide range of vehicles. Our corporate philosophy is characterised by fairness and integrity. As customer satisfaction is very important to us, we offer an excellent all-round service package and provide every customer with a competent contact person to assist them with the purchase or sale of vehicles. Convince yourself! Our services for you: Vehicle loading We are happy to assist you with loading your purchased vehicles. Organisation of special transports We are happy to help you arrange special transports. Temporary/Export License Plates We are happy to assist you with obtaining export or short-term license plates. Iedex Uu Ixepfx Af Sean

Condition: new, Year of construction: 2025, Cable drum transport trailer. Gross vehicle weight 8,800 kg, payload 5,820 kg. Hydraulic cable drum lifting and lowering from the towing vehicle or via a separate Hatz diesel engine (6.5 HP). Hydraulic drum drive with rubber-covered drive rollers. Drum diameter 800-3,000 mm, drum width up to 1,700 mm, centering cones for cable drums. Two-speed front landing gear, extendable rear support. BPW axle, EBS, parabolic suspension, Continental 315-80R22.5 tires, tire pressure monitoring. Towing eye 40 mm height adjustable, 2-wire pneumatic system, 24 V LED lighting. Toolbox. Vehicle completely hot-dip galvanized. New vehicle including factory warranty. = Further information = Curb weight: 2,980 kg Payload: 5,820 kg GVW: 8,800 kg Rear tires: 315-80R22.5 Country of production: Germany Contact Jan-Marc Schwickert for further information. Iodpfxewdd Aqo Af Ssan

Condition: used, axle configuration: 2 axles, first registration: 04/2005, color: black, Year of construction: 2005, Equipment: ABS, Empty weight: 8.900 kg Carrying capacity: 26.100 kg GVW: 35.000 kg Iedpsxw T Uasfx Af Sean Selling price: € 19.000, US$ 22.200

Condition: new, maximum load weight: 14,400 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-ER 19.0: * Wabco EBS-E (electronic braking system) * RDÜ tire pressure monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 ton Gigant axles * Air suspension with lifting and lowering system * Drawbar with 50 mm flange eye and height adjustment of 110 mm via offset plate * Jost landing gear at the front * External folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Side underrun protection * Plastic quarter mudguards * 15-pin electrical connector * Multi-chamber tail lights * Reinforcement package on the chassis for drill rig transport * 50 mm softwood floor, clamped design * Fixture for retrofitting container locks in front of the bulkhead * Bolted bulkhead made of smooth sheet metal * Split side walls made of trapezoidal-profiled steel sheet, foldable with a central folding stanchion * Steel rear wall, retractable between the ramps – storage holder inside in front of the bulkhead when not in use Iajdpfxsmi Tcqe Af Son * Rear stanchions bolted * Perforated outer frame, angled approx. 45 degrees, with 2 ton lashing capacity every 480 mm * Option to install 3 ton drop lashing rings every 600 mm * Load securing package: in each corner at the front and rear, 1 x 10 ton UVV lashing ring; on each side, 2 x 8 ton UVV recessed lashing rings in the outer frame; various holes in the bulkhead and end crossmember for 1.2 ton lashing options * One-piece slide-in ramps, 12 t/pair of ramps, approx. 2,750 x 620 mm * Rear approach angle approx. 860 mm * Chassis, drawbar, bulkhead, tailgate, folding supports, and ramps hot-dip galvanized * ---Axles, air reservoir, flange towing eye, and landing gear painted in black--- * Unloaded loading height approx. 940 mm * Loaded loading height approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer warranty * Errors and prior sale excepted * Available immediately from Egestorf

Condition: new, maximum load weight: 14,400 kg, overall weight: 19,000 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-ER 19.0: * Wabco EBS-E (electronic braking system) * RDÜ tire monitoring system * Emergency release device for spring brake cylinders * Drum brakes * 2 x 11 t Gigant axles * Air suspension with lifting and lowering device * Drawbar with 50 mm flanged towing eye and height adjustment of 110 mm using offset plate * Jost front landing gear * Outward folding rear supports * Plastic toolbox approx. 750 x 350 x 300 mm, mounted right side * Side underrun protection * Plastic quarter mudguards * 15-pin electric connector * Multi-chamber tail lights * Reinforcement package for drill rig transport on the chassis * 50 mm softwood floor, clamped design * Fixture in front of the bulkhead for subsequent installation of container locks * Bolted bulkhead made of smooth sheet metal * Split side walls made of trapezoidal-profiled steel sheet, fold-down with fold-down stanchion in the center * Steel rear wall, slidable between ramps – storage bracket inside in front of bulkhead when not in use * Rear posts bolted * Perforated outer frame bent at approximately 45 degrees with 2 t lashing capacity every 480 mm * Installation of 3 t drop-forged lashing brackets every 600 mm possible * Lashing package: In each front and rear corner 1 x 10 t UVV lashing ring, on each side 2 x 8 t UVV retractable lashing rings in the outer frame, various holes in the bulkhead and rear cross-member for 1.2 t lashing options * One-piece sliding ramps, 12 t/pair, approx. 2,750 x 620 mm * Rear loading slope approx. 860 mm Iedpemi Tmajfx Af Soan * Chassis, drawbar, bulkhead, rear flap, folding supports, and drive-on ramps hot-dip galvanized * --- Axles, air tank, flanged towing eye, and landing gear painted in black tone --- * Unladen loading height approx. 940 mm * Laden loading height approx. 910 mm * Wheelbase: 1,810 mm * Tires: 235/75R17.5 * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty * Errors and prior sale excepted * Immediately available ex Egestorf

Condition: used, axle configuration: 2 axles, loading space volume: 10 m³, total length: 7,500 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2012, Applicable material: Concrete Empty weight: 6.530 kg Carrying capacity: 25.470 kg GVW: 32.000 kg Tyre size on axle 1: 385/65 R22,5 Brake type on axle 1: drum Tyre size on axle 2: 385/65 R22,5 Tyre size on axle rear: 385/65 R22,5 Iaodpjx Utq Sefx Af Son Concrete mixer brand: Liebherr

Condition: new, maximum load weight: 8,800 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,370 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 11.9: ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes, 2 x 5.5 t ----Axles: * Gigant axles ----Suspension: * Parabolic springs with compensating unit ----Drawbar / Flange Towing Eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange towing eye ----General Attachments: * Jost landing gear at front * External foldable support legs at rear * Plastic toolbox on the front right outside, mounted on the bulkhead * Side underrun protection * Plastic quarter mudguards ----Electrics / Lighting: * TPMS (tire pressure monitoring system) * LED lighting ----Loading Platform: * Loading area 5.37 m * 50 mm softwood floor * Bolt-on bulkhead made of flat sheet metal * Side walls made of trapetzoidal-profiled steel, foldable with drop-side spring assist * Rear wall made of steel, can be slid between the ramp holders for storage in front of the bulkhead when not in use * Rear stakes bolted ----Load Securing: * Outer frame with perforations, bent approx. 45 degrees, lashing capacity 2 t every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible * In each front and rear corner, one lashing ring, 6.3 t each * Various holes in the bulkhead and rear crossmember for 1.2 t lashing options ----Ramps: * One-piece mechanical grid ramps with spring system for single-person operation, approx. 2,750 x 600 mm (can be pushed together to 20 mm) * Rear approach angle approx. 860 mm from chassis ----Tyres: * Tyres 235/75 R 17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Drawbar, bulkhead, tailgate, foldable supports, and drive-on ramps hot-dip galvanized * Axles, springs, air tanks, and 40 mm flange towing eye painted in black shade * Side wall paintwork in RAL2011 deep orange * Custom color paintwork for side panels available for an additional charge ----Information: * New vehicle with manufacturer's warranty * Subject to errors and prior sale Iaedpfjl Th Ncsx Af Son ----Delivery time: * Available immediately from Egestorf

Condition: new, maximum load weight: 8,870 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-ER 11.9: ----Brakes: * Electronic braking system (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle system ----Suspension: * Parabolic springs with equalizer unit ----Drawbar / Flange Eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange eye ----General Attachments: Ijdpfx Afjl Tilxs Sean * Jost mechanical landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Side underrun protection * Quarter fenders made of plastic * Plastic toolbox mounted front right on the bulkhead ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * 15-pin power connector * LED tail lights ----Loading Area: * 50 mm softwood floor * 20" container locks mounted at front and rear * Bolted smooth sheet bulkhead * Drop side walls made of profiled steel plate, trapezoidal, foldable with board wall spring assist * Bolted, hot-dip galvanized rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing shackles every 600 mm (5 lashing rings each side installed) * In each of the front and rear corners, 1 x 6.3 t lashing ring * Various holes in the front bulkhead and end beam for 1.2 t lashing points ----Ramps: * 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Rear storage compartment below the loading surface, integrated into the chassis ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, and rear wall * Side wall color RAL 9010 pure white * Painting of the side walls in any RAL color available at additional cost ----Information: * New vehicle, unregistered * Errors and prior sale excepted ----Delivery Time: * Immediately available ex Egestorf

Condition: new, maximum load weight: 8,800 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,370 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-R 11.9: ----Brake System: * EBS braking system * Emergency release device for spring brake cylinders * Drum brakes, 2 x 5.5 t ----Axles: * Gigant axles ----Suspension: * Parabolic springs with equalizing unit ----Drawbar / Flange Eye: * 300 mm height-adjustable drawbar * 40 mm flange towing eye ----General Attachments: * Jost support winch at the front * External folding support legs at rear * Plastic toolbox on the right front exterior of the front wall * Side underride protection * Plastic quarter mudguards ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * LED lighting ----Loading Platform: * Load area 5.37 m * 50 mm softwood floor * Bolted bulkhead made from smooth sheet metal * Drop sides made of trapezoidal-profiled steel sheet, foldable, with drop-side spring assist * Steel tailgate, slidable between ramp supports when not in use, stowed inside in front of the bulkhead * Screw-mounted rear stanchions ----Load Securing: * Perforated external frame, bent at approx. 45 degrees with 2 t lashing capacity every 480 mm * Option to fit 3 t recessed lashing rings every 600 mm * One 6.3 t lashing ring in each front and rear corner * Various bores in the bulkhead and rear crossmember for 1.2 t lashing points ----Ramps: * One-piece mechanical grid ramps with spring system for single-person operation, approx. 2,750 x 600 mm (can be retracted to 20 mm) * Rear approach angle approx. 860 mm chassis ----Tyres: * Tyres 235/75 R 17.5 ----Wheelbase: * Wheelbase: 990 mm ----Paintwork: * Drawbar, bulkhead, tailgate, folding supports, and access ramps hot-dip galvanized * Axles, springs, air tank, 40 mm flange towing eye coated in black * Drop-side panels painted in RAL2011 deep orange * Side walls can be painted in any RAL color for an additional charge Iajdpfx Ael Th Nrsf Sen ----Information: * New vehicle with manufacturer's warranty * Subject to prior sale and errors ----Delivery Time: * Immediately available ex Egestorf

Condition: new, maximum load weight: 8,870 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-ER 11.9: ----Brake system: * Electronic braking system (EBS) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle system ----Suspension: * Parabolic leaf springs with equalizing aggregate ----Drawbar / Flange towing eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange towing eye ----General attachments: * Jost mechanical support landing gear at the front * Rear external foldable support legs, hot-dip galvanized * Side underrun protection * Plastic quarter mudguards Ijdpfxol Thy Re Af Soan * Plastic toolbox mounted front-right on the bulkhead ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * 15-pin power connector * LED tail lights ----Loading area: * 50 mm softwood floor * 20" container locks fitted at front and rear * Front bulkhead bolted, made from smooth sheet metal * Drop sides made from trapezoidal-profiled steel, foldable with tailgate spring assist * Rear stanchions, hot-dip galvanized and bolted ----Load securing: * Perforated outer frame, approx. 45° edged, with 2 t lashing capacity every 480 mm * Optional installation of 3 t folding lashing brackets every 600 mm (each side fitted with 5 lashing rings) * One 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross beams for 1.2 t lashing options ----Ramps: * 1 pair of aluminum approach ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for pneumatic-tyred and tracked vehicles * Rear stowage compartment beneath the loading platform, integrated in the chassis ----Paint/Coating: * Chassis, drawbar, front and rear bulkheads hot-dip galvanized * Side board color RAL 9010 pure white * Sides can be painted in any RAL color at extra cost ----Additional information: * New vehicle without registration * Subject to errors and prior sale ----Delivery time: * Immediately available ex Egestorf

Condition: used, axle configuration: > 3 axles, first registration: 04/2000, loading space length: 10,790 mm, loading space width: 2,500 mm, loading space height: 950 mm, total length: 14,790 mm, total width: 2,500 mm, suspension: steel, Year of construction: 2000, Additional information : Brand: MÜLLER MITTELTAL Model: TS4 Structure: low loader ( platform L=10790 mm / W=2500 mm / H=950 mm ) Year: 2000 Suspension: steel Brakes: drum Dimensions: L/W: 14790 mm / 2500 mm Masses: full/empty: 57000 kg / 11800 kg HYDRAULIC RAMPS / STEEL SUSPENSION / DRUM BRAKES Suspension type : leaf_spring Brakes : Drum Suspension type : leaf_spring Brakes : Drum Suspension type : leaf_spring Brakes : Drum Iaedpfxouwu Eze Af Sen Suspension type : leaf_spring Brakes : Drum = More information = Suspension: leaf suspension Empty weight: 11.800 kg Carrying capacity: 45.200 kg GVW: 57.000 kg Please contact Andrei Somov, Mark Ševtšenko or Deniss Urmaker for more information

Condition: used, axle configuration: 3 axles, first registration: 09/2001, total length: 10,000 mm, total width: 2,510 mm, suspension: steel, Year of construction: 2001, Additional information : Brand: MÜLLER MITTELTAL Model: T 3 Structure: platform ( platform L=8400 / W=2510 / H=940 mm ) Year: 09.2001 Suspension: steel Brakes: drum Dimensions: L/W: 10000 mm / 2510mm Masses: full/empty: 24000 kg / 6100 kg Brakes : Drum Suspension type : leaf_spring Brakes : Drum Suspension type : leaf_spring Brakes : Drum Suspension type : leaf_spring = More information = Suspension: leaf suspension Empty weight: 6.100 kg Carrying capacity: 17.900 kg GVW: 24.000 kg Please contact Andrei Somov, Mark Ševtšenko, Alejandro Goyeneche or Deniss Urmaker for more information Iaodpfx Asuwvbqef Sjn

Condition: new, maximum load weight: 8,780 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2024, * KA-TA-R 11.9 Masterline: ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem compensating unit ----Drawbar / Flange Eye: * Height-adjustable (up to 300 mm), hot-dip galvanized drawbar with 40 mm flange eye ----General Attachments: Iajdpfx Aspk D D Uef Sjn * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanized folding support legs at the rear * Side-mounted toolbox made of galvanized sheet steel, on the right * Plastic quarter mudguards ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * Bolted underrun protection with LED tail lights ----Tipper Body: * Mesh hooks on the sides and rear, integrated into the central locking mounts plus 3 external hooks on the front wall * Hot-dip galvanized chassis * Steel pal. three-way tipper body, fully galvanized * Continuous side walls, without central stanchion, foldable, with drop side spring supports * Tailboard can be folded down and used as a swinging gate, with manual central locking * Hot-dip galvanized, bolted rear stanchion ----Load Securing: * 1 x 5 t recessed, foldable lashing ring in each corner, plus 4 x 3 t recessed and foldable lashing rings integrated in the outer frame on each side * 4 mm steel floor, with slot rail at the rear for loading ramps ----Ramps: * 1 pair of aluminum loading ramps, approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the bed, integrated into the chassis, accessible from the rear ----Tyres: * Tyres 235/75 R 17.5 ----Paintwork: * Axles, springs, air tanks, drawbar and landing gear painted in black * Vehicle is hot-dip galvanized ----Information: * Body reinforced, load securing certificate according to EN 12642 XL * New vehicle with manufacturer warranty * Subject to prior sale and errors ----Delivery time: * Immediately available ex Egestorf on the A7