Low loader trailer

MÜLLER-MITTELTAL 18t. Kombi, Abroller Absetzer Tieflader, Parabel

Condition: new, maximum load weight: 13,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA-Kombi 18.0: * 3-in-1 = for skip, roll-off containers, and as a low loader ----Brake System: * RDÜ Tire Pressure Monitoring System * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders ----Axles: * 2 x 12 t Gigant axles ----Suspension: * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm towing eye and adjustable height mechanism ----Electrics / Lighting: * LED tail lights * 15-pin electrical connector * RDÜ (tire pressure monitoring), indication possible in the truck via EBS signal (no vehicle-side installation required) ----General Attachments: * Toolbox made of powder-coated sheet steel, mounted on the right side * Side underrun protection * Plastic quarter mudguards with spray protection * Storage box for container nets made of galvanized sheet metal, approx. 960 x 300 x 400 / 450 mm, right side * Rear plastic bumper pads * Mechanical drop-down supports at the rear ----Loading Area: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roll containers * Steel floor with recessed rollers in the bogie area * For roll-off container transport, container lengths from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking system and mechanical removable front guide blocks in the track, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * 8 repositionable skip stoppers for lateral centering of skips, front 4 stoppers inserted with pivoting stop * Weld bead as anti-slip coating in the approach ramp area ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning devices for friction-locked and form-fit securing of skips * 4 cloverleaf-type lashing brackets on each side * 1 pair of 13.4 t UVV lashing rings at the front ----Ramps: Hjdpfel Thwcjx Acpen * 1 pair of aluminum approach ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Info: * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Permissible gross weight technically up to 20,000 kg * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. calendar week 44 / 2026

Condition: used, machine/vehicle number: GE12/042/2023, mileage: 167,390 km, power: 353 kW (479.95 HP), first registration: 06/2015, fuel type: diesel, empty load weight: 11,840 kg, maximum load weight: 14,160 kg, overall weight: 26,000 kg, brakes: engine braking, color: green, gearing type: mechanical, emission class: euro6, suspension: air, operation weight: 40 kg, Equipment: ABS, air conditioning, compressor, cruise control, differential lock, hydraulics, trailer coupling, Very well-maintained vehicle 167,000 km Roll-off tipper - VDL S-21-6200 PTO (power take-off) Engine brake Rear axle differential lock Air-suspended rear axle Lifting and steering axle Particulate filter - Green environmental badge ABS Power steering Cruise control Air conditioning Engine capacity - 12,419 cc 8-speed splitter gearbox Wheelbase - 4,700 mm Hsdpfx Ajlnbb Ajcpjn Payload - 14,160 kg Trailer hitch: jaw-type with air connection Gross combination weight - 40,000 kg Driver's seat: sprung and orthopedic Roof hatch External sun visor Electric windows Electrically adjustable and heated exterior mirrors Radio/CD Navigation system Toll Collect pre-installation Bed Commercial/Export net price - €57,990 Subject to change, prior sale, and errors. ===== Telephone Mobile =====

Condition: new, maximum load weight: 10,420 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 4,000 mm, loading space width: 2,550 mm, loading space height: 1,030 mm, loading space volume: 20 m³, total width: 2,550 mm, total height: 1,030 mm, Equipment: ABS, WhatsApp: We have the largest selection of HÜFFERMANN roll-off/demountable container trailers in southern Germany in stock for you!! ALL TRAILERS ARE ARC GALVANIZED!!!!! 2-AXLE CENTRAL AXLE MINI CARRIER TRAILER - "HÜFFERMANN" MULTIFIX For transporting skip bins in accordance with DIN 30720 Weights Total weight (permissible) 13 t Total weight (technical) 13 t with a support load of 1 t Dimensions Frame length approx. 4,000 mm, for a skip bin up to 20 m3 Total width max. 2,550 mm Container contact height (in driving position) approx. 1,030 mm Frame Type HTM-3 1340 with Safetyfix brackets, single tires Welded steel frame construction made of high-strength steel Chassis for skip bins for rear loading Combined load securing, side centering fix, a few plug-in wedges with pendulum shoes on the front Attachment eyes on the side of the frame for Lashing chains Prepared for chainless load securing "Multifix" Closed sheet steel floor, between the longitudinal beams Frame attachments 1 pair of lashing points for a stacked skip bin 4 pairs of screwable 6.3t lashing brackets on the outer frame Skip bin securing Multifix for a skip bin Chainless load securing Multifix for a skip bin on the mini-carrier without press transport equipment Towing device Welded towing tube with screwed 40 mm towing eye, screwable/height adjustable +/- 200 mm Support device At the front 1 mechanical steel support winch with hand crank, one-sided operation on the left, 1 drop support at the rear Axles 2 BPW axles with disc brakes ø370 mm, load capacity 7 t/axle, for "E" tires Axle spacing 1,260 mm Wheels 4 tires 285/70 R 19.5, 143M CONTINENTAL 4 steel rims 8.25 x 19.5 silver Brake system/suspension Brake system in accordance with EC Directive 71/320 or ECE R13 Two-line compressed air brake system Brake system made by factory EBS system 2S2M, 2nd axle sensed Electronic braking and stability system EBS-E and RSS or TEBS G2 and RSP Spring-loaded parking brake on 2nd axle Aluminum air tank Brake/air connection lines with Duomatic quick coupling EBS/ABS connection cable Bracket for EBS and electrical plugs on the towing device Air suspension with lifting and lowering device Automatic adjustment to driving level from 15 km/h Assistance/safety systems Weight detection/axle load display via EBS CAN bus signal for display in the driver's cab (truck must be prepared accordingly, no calibrated scales) Lighting/electrics 24-volt lighting system in accordance with EC Directive 76/756/EEC 2 full LED module tail lights, "Hella brand" 2 LED position lights at the front 2 LED outline lights at the rear Flashing LED side marker lights, controlled by indicator signal LED license plate lights, integrated in the tail light Fixed connection cable with 1 x 15-pin plug 2 additional LED reversing lights, mounted on the rear left and right Paint Automatic blasted, arc galvanized, epoxy resin-based primer, Painting with 2K top coat using the electrostatic process Material doubling and transitions preserved with penetrating wax Chassis = RAL 9005 jet black Load securing elements = RAL 1003 signal yellow Drawbar/drawbar tube in chassis color = RAL 9005 jet black Wheel hubs black = powder-coated Hedpfx Acsi Aimrepen Underrun protection = galvanized Side collision protection = anodized Plastic parts black, unpainted P

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release mechanism for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Centre axle can be lifted ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm towing eye & height adjustment device ----Electrics / Lighting: * LED tail lights * 15-pin power socket * TPMS (Tire Pressure Monitoring System) ----General Fittings: * Toolbox made of powder-coated sheet steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized sheet steel (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with spray protection * Rear plastic impact protection bumpers * Mechanical drop supports at the rear ----Container / Lowbed Platform: * Hot-dip galvanized main frame with raised outer rails (approx. 25 mm higher) to guide the roll containers * Steel floor with wheel recesses in the bogie area * When transporting roll-off containers: container length from 5,500 to 7,000 mm possible * Pneumatic 4-point locking system and mechanically insertable guide angles at the front of the tracks * Load certification according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Including 8 repositionable skip stops for lateral centering of the skips, front 4 skip stops inserted with pivoting stops ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the side for attaching tension elements to secure skips by force and form closure * 4 cloverleaf-style lashing cleats per side and 1 pair of 13.4 t UVV lashing rings at the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Weld bead as anti-slip surface in the run-up area of the ramp * 1 pair of aluminium approach ramps (16 t / pair), 2,800 x 400 mm, suitable for rubber-tyred and tracked vehicles (lockable storage compartment accessible from the rear) ----Tyres: * Tyres: 235/75 R17.5 Hedpfx Acstplv Tjpsn ----Ride Height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape at the sides & rear * Axles, slewing ring, drawbar and air tanks painted in a shade of black * Hot-dip galvanized main frame ----Info: * Permissible gross weight technically possible: 27,000 kg * New vehicle without initial registration, with manufacturer's warranty * Errors and interim sale subject to change ----Delivery Time: * Available from approx. week 47/2026

Condition: new, power: 132 kW (179.47 HP), number of beds: 4, number of seats: 4, fuel type: diesel, gearing type: automatic, color: white, total length: 7,890 mm, total width: 2,320 mm, total height: 2,920 mm, overall weight: 4,500 kg, empty load weight: 4,040 kg, maximum load weight: 460 kg, wheelbase: 445 mm, Equipment: ABS, cruise control, fog lights, immobilizer system, traction control, Highlights: * Face to Face seating Safety: * Third brake light * ABS * Traction control (ASR) * Electronic Stability Program (ESP) * Reversing camera * Summer tires * Immobilizer * Passenger airbag * Driver airbag Lighting: * LED headlights * Fog lights Comfort: * Heated exterior mirrors * Electrically adjustable exterior mirrors * Electric windows * Height-adjustable driver’s seat * Automatic climate control * Leather steering wheel * Multifunction steering wheel * Multimedia system * Cruise control * Remote central locking Radio/Navigation: * Bluetooth hands-free system * DAB+ digital radio * Hands-free system * Navigation system * USB port Motorhome-specific features: * Overcab / drop-down bed * Double floor * Single beds * Rear garage * Awning * Side seating group * Separate shower Other: * Alloy wheels Further description: Hodpfx Aov Dnd Hscpon Furniture décor “Navarra,” upholstery fabric “Pisa,” decoration “Lasca,” Luminary package Integra 2-axle, naviceiver with dual rear-view camera, steering wheel with controls, pre-wiring for solar panel, driver’s cab carpet, Fiat automatic transmission, 16" alloy wheels, exterior graphics carbon, chrome elements front/rear area, LED cornering lights, LED fog lights, front flat-screen TV mount, rear flat-screen TV slide-out, rear garage organizer system, sound system, automatic climate control, leather steering wheel/gear knob, mobile phone wireless charging station, heat exchanger, comfort seats in cab, Luminary Plus package Integra 2-axle, multifunction socket, exterior shower (hot/cold), external gas outlet, windshield wiper system with winter park position, heated windshield, lithium battery, 5.5 m awning, heated front windshield, underfloor camera for tank drainage, documentation fee --- We strive to describe the offered vehicle as accurately as possible. However, errors may occur. Therefore, please specifically consult our sales staff if you place importance on a particular feature. Subject to prior sale and errors. --- Model/year: 2024, New MOT: yes, Internal ID: N0041660, Engine details: Euro 6dT Final 8, Transmission: automatic, Body length: 789 cm, Unladen weight: 4,040 kg, Payload: 460 kg, Sleeping areas: Rear (195x80) Rear (200x80) Drop-down bed (193x150), Seats with belts: 4, Wheelbase: 445 cm, Trailer load (braked): 1,500 kg, Trailer load (unbraked): 750 kg, Heating: Alde hot water heating, Fridge volume: 157 l, Freezer volume: 15 l, Fresh water: 140 l, Fresh water (incl. boiler): 160 l, Waste water tank volume: 100 l, Charger: 18 A, Battery: 100 Ah, Upholstery: fabric, 230V sockets: 3, 12V sockets: 1, Other: new MOT, CHASSIS: ASR, ABS, fog lights, central locking w/ remote, torque converter automatic, electric mirrors, jack, Fix & Go kit, multifunction steering wheel, alloy rims, immobilizer, third brake light, cruise control, heated exterior mirrors, 90 l diesel tank, ESP incl. hill holder, driver airbag, passenger airbag, BODY: Electric entry step, one-piece entry door with window, blinds to left and right, GRP body, windscreen roller blind, entry door fly screen, third brake light, awning light, opening windows all around, awning, garage door, gas locker, framed windows, midi-heki, bin in the door, INTERIOR: cassette blinds, fly screen entry door, power-operated front roller blind, fixed bed, KITCHEN: Range hood, AES fridge, 3-burner stove, waste bin, SANITARY: Pressurized water system, waste water, electric...

Condition: new, maximum load weight: 13,700 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA 18.0: * 2 in 1 = for roll-off containers and as low-bed trailer ----Brake system: * EBS electronic braking system * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 10 ton axles ----Suspension: * Air suspension with lift and lower system as well as RTR valve ----Drawbar: * Drawbar 2,000 mm long with 40 mm towing eye and adjustable-height coupling ----Electrics / Lighting: * Tire pressure monitoring system with in-cab display via EBS signal (no truck-side installation required) * LED tail lights 12 / 24 V * 15-pin power connector ----General accessories: * Toolbox made of powder-coated sheet steel approx. 1,000 x 300 x 600 mm * Container net storage box made of galvanized sheet metal, 960 x 300 x 450/400 mm * Reflective contour tape on sides & rear * Side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact buffer * Foldable A-sign at the rear ----Loading platform: * Main frame with raised outer rails for guiding roll containers * Steel floor plate with roller recesses in the bogie area * Container length from 5,500 - 7,000 mm possible * Pneumatic 4-point clamp lock as well as mechanically insertable stop angles at the front in the track, load securing certificate according to DIN 30722 - 1 * Weld bead as anti-slip coating in the slope area * Mechanical drop-down supports at the rear ----Load securing: * 1 pair of 10 t UVV lashing rings at the front bulkhead support * 3 pairs of 10 t UVV lashing rings on the side in the outer frame * Each side: 4 x 2 t cloverleaf-type lashing eyes * 4 x 8 t recessed lashing brackets in the outer frame ----Ramps: * 1 pair of aluminum approach ramps (10.6 t / pair) 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from rear) ----Paintwork: * Chassis, bogie, locking components, rear drop supports hot-dip galvanized * Drawbar, axles, and air tanks painted in black tone ----Info: Hodpfx Acel Tq Nmepjn * New vehicle without initial registration, with full manufacturer’s warranty * Subject to errors and prior sale * Sample images ----Delivery time: * Available from approx. calendar week 43 / 2026

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axle: * 3 x 11 t Gigant axles * Center axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment system ----Electrics / Lighting: Hsdpfepk D Awsx Acpon * LED tail lights * 15-pin electrical connector * Tire pressure monitoring system (TPMS) ----General attachments: * Toolbox made of powder-coated steel sheet (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel sheet (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact protection buffers * Mechanical drop supports at the rear ----Container / Low loader platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm raised) to guide roll containers * Steel floor with roller recesses in the bogie area * Suitable for transport of roll-off containers with lengths from 5,500 to 7,000 mm * Pneumatic 4-point clamp locking and mechanically insertable stop angles at the front in the guide rails * Loading certificate according to DIN 30722-1 * Transport of up to 2 skip containers with a maximum volume of 10 m³ possible * Includes 8 adjustable skip stops for lateral centering; the front 4 stops are inserted with a pendulum stop ----Load securing: * 3 pairs of 10 t UVV lashing rings on the side for attaching tensioning elements for positive and frictional securing of skips * 4 cloverleaf lashing slots on each side and 1 pair of 13.4 t UVV lashing rings facing forward * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 ----Ramps: * Weld bead as anti-slip surface in the ramp track area * 1 pair of aluminum approach ramps (16 t / pair) 2,800 x 400 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment at the rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload 18,900 kg ----Paintwork: * Reflective contour tape on sides and rear * Axles, turntable, drawbar, and air tanks painted in black * Hot-dip galvanized main frame ----Information: * Technically permissible gross weight of 27,000 kg * New vehicle without initial registration, with manufacturer's warranty * Errors and prior sale reserved ----Delivery time: * Available from approx. calendar week 47/2026

Condition: new, maximum load weight: 18,900 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA-Kombi 24.0: ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with manual lowering at the rear ----Axles: * 3 x 11 t Gigant axles * Centre axle liftable ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long, with 40 mm draw eye & height adjustment ----Electrics / Lighting: * LED tail lights * 15-pin electrical connector * TPMS (Tire Pressure Monitoring System) ----General Accessories: * Toolbox made from powder-coated steel (W: 1,000 mm x H: 300 mm x D: 450 mm) * Storage box for container nets made of galvanized steel (W: 960 mm x H: 300 mm x D: 450 mm) * Side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear bumper pads * Mechanical drop-down supports at the rear ----Container / Low Loader Platform: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roll-off containers * Steel floor with roller recesses in the bogie area * For roll-off container transport, container length from 5,500 - 7,000 mm possible * Pneumatic 4-point clamp locking and mechanical pin-in end stops at the front of the rails * Load certification to DIN 30722 - 1 * Transport of up to 2 skip containers with a max. volume of 10 m³ each possible * Includes 8 repositionable skip stops for lateral centring of the skips, front 4 stops with pendulum stops ----Load securing: * 3 pairs of 10 t UVV lashing rings on the sides for hooking in tensioning elements for both positive and non-positive securing of the skips * 4 lashing bars in cloverleaf design (on the sides) and 1 pair of 13.4 t UVV lashing rings to the front * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 ----Ramps: * Welded seam as anti-slip surface in the ramp track area * 1 pair of aluminium loading ramps (16 t / pair) 2,800 x 400 mm suitable for rubber-tyred and chain-driven vehicles (lockable storage compartment access from rear) ----Tyres: * Tyres: 235/75 R17.5 ----Ride height: * Loaded ride height approx. 1,003 mm ----Payload: * Payload: 18,900 kg ----Paintwork: * Reflective contour marking tape on the sides & rear * Axles, turntable, drawbar, and air tank painted in black * Hot-dip galvanized main frame ----Information: * Permissible gross weight of 27,000 kg technically possible * New vehicle without first registration, with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: Hsdpfx Acopk D Iijpsn * Available from approx. CW 47/2026

Condition: new, maximum load weight: 23,830 kg, overall weight: 30,000 kg, axle configuration: 3 axles, loading space length: 8,460 mm, loading space width: 2,520 mm, Year of construction: 2026, * T3 Profile 30.0: * EBS braking system * TPMS (Tire Pressure Monitoring System) * Emergency release device for spring-loaded cylinders * Drum brakes * 3 x 11 t BPW Eco axles * Parabolic springs * Mechanical axle compensation at the rear * Side underrun protection * Rear swing-down supports on the chassis frame * Mechanically adjustable warning panel packages at front and rear * Front axle with closed plastic mudguards, rear axle with straight, galvanized steel fenders, each with splash guards * Reflective contour tape on sides and rear * Folding lid (hot-dip galvanized) for the toolbox on the bogie platform * Multi-voltage electrical system * LED tail lights * Removable warning beacon at the rear * Drawbar with 40 mm towing eye and height adjustment via tension spring and turnbuckle * 15-pin power connector * Four stake pockets per side (no stakes included), each with integrated lashing options * Load securing package consisting of: 2 lashing eyes (6.4 t) at the front left & right on the main frame of the bogie platform; 5 pairs of swiveling, retractable UVV lashing rings, loadable in all directions and recessed into the outer frame – 13.4 t in the corners, otherwise 10 t * 6 pairs of mechanical folding outriggers for up to 3 m overall width (not in the rear taper) * Widening boards stored in the center of the load platform * Excavator arm rest over the rear axle up to the end cross member, approx. 2,100 mm long (2 pairs of 6.4 t lashing rings on the sides of the excavator arm rest) * One-piece hydraulic loading ramps (approx. 3,000 x 720 mm) * 4-way valve block for later retrofitting of hydraulic ramp adjustment * Mechanical lateral ramp adjustment * Load platform over turntable: approx. 1,960 x 2,520 mm * Unladen loading height approx. 1,070 mm * Rear loading area: approx. 6,500 x 2,520 mm * Unladen loading height approx. 910 mm (including 860 mm approach slope) * Chassis, bogie, drawbar and ramps hot-dip galvanized * Axles, springs, air tanks, etc. painted in a black finish * 235/75 R 17.5 twin tires * Unladen weight: 5,900 kg * --Permissible gross weight technically up to 30,000 kg-- * Vehicle is hot-dip galvanized * New vehicle with manufacturer’s warranty Hjdpel Thxdjfx Acpsn * Errors and prior sale excepted * Immediately available ex Egestorf

Condition: new, maximum load weight: 13,490 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2025, TRA-Kombi 18.0: * 3 in 1 = for roll-off containers, skip containers, and as a low-loader ----Braking system: * EBS-E (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 10.5 ton axles ----Suspension: * Air suspension with manual rear lowering ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long with 40 mm towing eye and height adjustment device ----Electrics / Lighting: * TPMS (Tyre Pressure Monitoring System), displayable in the truck via EBS signal (no installation required on the truck side) * LED tail lights 12 / 24 V * 15-pin power connector ----General attachments: * Tool box made of powder-coated sheet steel * Spare wheel holder in basket design, right side * Closed side underrun protection * Plastic quarter mudguards with spray protection * Plastic rear impact protection buffers * Foldable A-sign at rear ----Loading platform: * Hot-dip galvanized main frame with raised outer frame for guiding roll containers * Steel plate floor with roller recesses in the bogie area * Suitable for roll-off containers with length from 5,500 to 7,000 mm Hjdpewb Rakofx Acpsn * Pneumatic 4-point clamp locking system and mechanically insertable stop angles at the front in the track * For transport of up to 2 skip containers with max. 10 m³ volume * Includes 8 plug-in skip stops for lateral centering of the skips, front 4 skip stops plug-in with swiveling stop * Weld bead as anti-slip coating in the ramp track area * Mechanical drop-down support legs at the rear ----Load securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning elements for positive and non-positive securing of skips; 4 clover-leaf lashing bars on each side * 1 pair of 13.4 t UVV lashing rings to the front * 4 x 8 t lashing eyes on each side, recessed into the outer frame ----Ramps: * Aluminum approach ramps (10.6 t / pair), 2,800 x 470 mm; suitable for rubber-tired and tracked vehicles (lockable storage compartment at rear) ----Paintwork: * Reflective contour tape on sides and rear * Frame hot-dip galvanized * Axles, drawbar painted black ----Information: * Load securing certificate according to DIN 30722-1 * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642, and VDI 2700 * --Permissible gross weight of 20,000 kg technically possible-- * New vehicle without initial registration with manufacturer warranty * Errors and prior sale excepted ----Delivery time: * Available immediately ex Egstorf