Used Müller-Mitteltal Special Purpose Trailers for sale (266)

Condition: used, maximum load weight: 23,700 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 01/2008, total width: 2,550 mm, total height: 3,700 mm, Equipment: ABS, German trailer, * 30-ton capacity * Extendable to 3 meters * Spring-loaded ramps * 50mm drawbar eye * Air suspension Ljdpfx Asy Trntsgqjag New TÜV (technical inspection) available for an additional charge!!! For further information, please call Christian Bredemeier.

Condition: used, empty load weight: 3,500 kg, maximum load weight: 9,500 kg, overall weight: 13,000 kg, axle configuration: 2 axles, first registration: 11/1993, loading space length: 5,000 mm, loading space width: 2,200 mm, loading space height: 500 mm, suspension: steel, color: orange, mileage: 1,001 km, gearing type: other, driver cabin: other, Vehicle location: Bovenden, steel superstructure, 2 axles, tandem axle, leaf spring suspension, lashing eyes, side guards, front supports, swing-out tailgates. Lajdpfx Aozgu Sfegqsg Superstructure: Tandem 3-way tipper trailer. Spare wheel available at an extra charge! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors!

Condition: used, maximum load weight: 7,950 kg, overall weight: 11,000 kg, axle configuration: 2 axles, first registration: 08/2010, next inspection (TÜV): 02/2026, loading space length: 6,000 mm, loading space width: 2,470 mm, loading space height: 900 mm, total width: 2,550 mm, Gross weight: 11,000 kg Unladen weight: 3,050 kg Payload: 7,950 kg Overall length: 8,100 mm Loading length: total approx. 6,000 mm Width: 2,550 mm / loading width approx. 2,470 mm Loading height: 900 mm Additional information Ljdpjx E I Utofx Agqjag - Height-adjustable drawbar - Support leg - 400 mm drop sides, spring-mounted - E-wheel - BPW axles - Spring ramps with grating, laterally adjustable - Climbing strips, rear stabilizer - Large lashing package

Condition: used, maximum load weight: 7,100 kg, overall weight: 10,000 kg, axle configuration: 2 axles, first registration: 07/2007, loading space length: 5,000 mm, loading space width: 2,450 mm, loading space height: 1,100 mm, total width: 2,550 mm, Vehicle / Body: Tandem three-way tipper First registration: 07/07 Gross weight: 10,000 kg Unladen weight: 2,900 kg Ledsyz H Azspfx Agqeag Payload: 7,100 kg Overall length: 6,900 mm Loading length: 5,000 mm Width: 2,550 mm / loading width approx. 2,450 mm Loading height: approx. 1,100 mm Additional information - 40 km/h - 500 mm side walls - 500 mm galvanized front extension - 7 pairs of lashing rings on loading area - 4 pairs of lashing rings on exterior underbody - Support leg - Rear support - Drop side lifting spring - Drive-on ramps optional at €1,280.00

Condition: used, maximum load weight: 8,900 kg, overall weight: 11,900 kg, axle configuration: 2 axles, first registration: 12/2011, next inspection (TÜV): 09/2026, loading space length: 6,000 mm, loading space width: 2,480 mm, loading space height: 900 mm, total width: 2,550 mm, Further information: - Ramp covered with grating - Spring-loaded ramps - Foldable support legs - LED reversing lights - Side board springs - BPW axles - Side boards 400mm Lajdpfx Aszb Ua Tegqsg - Overall length 6,000mm including rear overhang approx. 1,100mm

Condition: used, maximum load weight: 19,800 kg, overall weight: 24,000 kg, axle configuration: 3 axles, first registration: 01/2019, Equipment: ABS, * Müller Mitteltal 3-axle trailer for demountable containers * Model TM 2 24 * For two demountable containers from 7 to 10 m³ * Load securing with only two chains per container * Twin tyres 265/70 R19.5 * Air suspension * BPW axles * Turntable drawbar pneumatically lowerable with pneumatic release * 8 UVV lashing rings (5t) for attaching tensioning elements * 8 adjustable container stops for lateral centering of containers * EBS * Technically permissible gross weight 27,000 kg Lodpfx Agsyx R Enjqoag

Condition: used, empty load weight: 4,500 kg, maximum load weight: 13,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 08/2015, next inspection (TÜV): 07/2025, loading space length: 4,800 mm, loading space width: 2,400 mm, loading space height: 1,000 mm, color: blue, Year of construction: 2015, gearing type: other, driver cabin: other, Equipment: ABS, * German trailer * Condition, see photos * Müller-Mitteltal 3-way tipper, type KA-TA-R 18.0 tandem * Tipper dimensions: 4,800 x 2,400 x 1,000 mm * Roll tarp * Air suspension * Disc brakes * Platform * Jost support leg * Payload 13,500 kg If a new TÜV inspection is required, we are happy to provide you with an offer from our partner workshops. Our offer generally does NOT include a new TÜV inspection, new DGUV, new SP, or new UVV. Ledpjwz H Nbsfx Agqsag You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend a viewing and inspection of the goods to ensure the buyer does not have any misconceptions regarding condition or suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All information provided without guarantee. We are not liable for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and features of the goods/vehicles. Subject to alterations, prior sale, and errors.

Condition: new, maximum load weight: 8,780 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2024, * KA-TA-R 11.9 Masterline: ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem compensating unit ----Drawbar / Flange Eye: * Height-adjustable (up to 300 mm), hot-dip galvanized drawbar with 40 mm flange eye ----General Attachments: * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanized folding support legs at the rear * Side-mounted toolbox made of galvanized sheet steel, on the right * Plastic quarter mudguards ----Electrics / Lighting: Lajdpepk D Dmjfx Agqeg * RDÜ tire pressure monitoring system * 15-pin power connector * Bolted underrun protection with LED tail lights ----Tipper Body: * Mesh hooks on the sides and rear, integrated into the central locking mounts plus 3 external hooks on the front wall * Hot-dip galvanized chassis * Steel pal. three-way tipper body, fully galvanized * Continuous side walls, without central stanchion, foldable, with drop side spring supports * Tailboard can be folded down and used as a swinging gate, with manual central locking * Hot-dip galvanized, bolted rear stanchion ----Load Securing: * 1 x 5 t recessed, foldable lashing ring in each corner, plus 4 x 3 t recessed and foldable lashing rings integrated in the outer frame on each side * 4 mm steel floor, with slot rail at the rear for loading ramps ----Ramps: * 1 pair of aluminum loading ramps, approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the bed, integrated into the chassis, accessible from the rear ----Tyres: * Tyres 235/75 R 17.5 ----Paintwork: * Axles, springs, air tanks, drawbar and landing gear painted in black * Vehicle is hot-dip galvanized ----Information: * Body reinforced, load securing certificate according to EN 12642 XL * New vehicle with manufacturer warranty * Subject to prior sale and errors ----Delivery time: * Immediately available ex Egestorf on the A7

Condition: new, maximum load weight: 8,780 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 500 mm, Year of construction: 2024, * KA-TA-R 11.9 Masterline: ----Brakes: * EBS braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axle: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem compensating unit ----Drawbar / Flange Eye: * Height-adjustable (up to 300 mm), hot-dip galvanized drawbar with 40 mm flange eye ----General Attachments: * Jost mechanical landing gear at the front * 2 mechanical, hot-dip galvanized folding support legs at the rear * Side-mounted toolbox made of galvanized sheet steel, on the right * Plastic quarter mudguards ----Electrics / Lighting: * RDÜ tire pressure monitoring system * 15-pin power connector * Bolted underrun protection with LED tail lights ----Tipper Body: * Mesh hooks on the sides and rear, integrated into the central locking mounts plus 3 external hooks on the front wall * Hot-dip galvanized chassis * Steel pal. three-way tipper body, fully galvanized * Continuous side walls, without central stanchion, foldable, with drop side spring supports * Tailboard can be folded down and used as a swinging gate, with manual central locking * Hot-dip galvanized, bolted rear stanchion ----Load Securing: * 1 x 5 t recessed, foldable lashing ring in each corner, plus 4 x 3 t recessed and foldable lashing rings integrated in the outer frame on each side * 4 mm steel floor, with slot rail at the rear for loading ramps ----Ramps: Lajdpjpk D D Usfx Agqeg * 1 pair of aluminum loading ramps, approx. 3,570 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the bed, integrated into the chassis, accessible from the rear ----Tyres: * Tyres 235/75 R 17.5 ----Paintwork: * Axles, springs, air tanks, drawbar and landing gear painted in black * Vehicle is hot-dip galvanized ----Information: * Body reinforced, load securing certificate according to EN 12642 XL * New vehicle with manufacturer warranty * Subject to prior sale and errors ----Delivery time: * Immediately available ex Egestorf on the A7

Condition: used, maximum load weight: 31,000 kg, overall weight: 40,000 kg, axle configuration: > 3 axles, first registration: 07/2024, loading space length: 9,290 mm, loading space width: 2,520 mm, loading space height: 950 mm, * PT 40.0 Profi ----Brakes: * Wabco EBS-E (electronic braking system) * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 4 x 11 to. Gigant axles ----Suspension: * Air suspension with lifting and lowering system and rapid lowering valve ----Drawbar: * Drawbar with 50 mm drawbar eye and height adjustment ----Lighting / Electrical: * EBS multi-voltage system with 12 & 24 V electrical system * 15-pin electrical connector * LED lighting system 12 / 24 V Ledpfx Agel Tnu Asqoag * LED rotating beacon (removable) at the rear * 2 LED reversing lights (switched via reverse gear) ----General components: * Pressure gauge - pressure indicator for determining payload (axles separated into 2 air suspension circuits) * Side underrun protection * Swivel supports at the rear of the chassis frame * Mech. adjustable warning sign packages at the front and rear * Front plastic quarter fenders with splash guard * Rear straight, galvanized steel side skirts with splash guard * Reflective contour strip on the side and rear * Tool box made of galvanized steel sheet, black powder-coated, approx. 1,000 mm wide, 600 mm deep, 300 mm high ----Low-loader platform: * Extension in front of the turntable platform approx. 490 mm long with 45° corners * ROBOTER welded anti-slip coating on the steel plate of the turntable platform * Hardwood flooring on the running surfaces of the low-loader platform ----Load securing (La-Si package consisting of): * 1 x 13.4 to. UVV lashing eye to the left and right in front of the front bulkhead beam * 4 holes on each side in the turntable platform, each with a lashing force of 2 to. * 1 pair of lashing eyes (13.4 to.) hanging at the rear left and right in front of the rear beam * 4 pairs of UVV lashing rings (10 to.) on each side, swiveling and lowering, capable of withstanding loads in all directions and recessed in the outer frame * 3 rung pockets on each side with simultaneous 2 to. lashing option ----Widening package: * Hot-dip galvanized mech. folding outriggers for 3 m overall width (however, not in the rear slope) * Beam holder for widening under the chassis on the left in the longitudinal direction ----Excavator arm rest: * Excavator arm rest above the rear axle up to the end beam approx. 2,100 mm long and approx. 190 mm deep * 2 pairs of 6.4 to. lashing eyes on each side in the excavator arm rest ----Ramps: * Hydr. one-piece access ramps (approx. 3,000 x 720 mm) mech. adjustable on the side * Outer planks of the access ramps made of hardwood * Steel structure as preparation for a 6-way control valve ----Loading height: * Unladen loading edge approx. 950 mm +/+ 20 mm ----Tires: * Tires 235/75 R 17.5 ----Paintwork: * Chassis, turntable, folding outriggers, mech. support legs, access ramps hot-dip galvanized * Axles, air tank, drawbar painted in a black tone ----Information: * Vehicle has a day registration in 07/2024, due to the missing tire pressure monitoring system and has not been loaded/used * New vehicle with manufacturer's warranty * Errors and prior sale reserved ----Delivery time: * Available for immediate delivery from Egestorf

Condition: new, maximum load weight: 10,900 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, ETÜ-TA-R 14.4 ----Brakes: * EBS electronic braking system * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Air suspension ----Drawbar / Flanged Towing Eye: * Drawbar adjustable in height by 300 mm * Drawbar extension by 250 mm, total length 2,250 mm * 40 mm flanged towing eye ----Lighting / Electrics: * TPMS (Tire Pressure Monitoring System) * LED tail lights 12 / 24 V * 15-pin power connector ----General Accessories: * Jost landing gear at the front * Externally mounted, hot-dip galvanized foldable rear supports * Plastic toolbox mounted front right on the front wall * Side underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood flooring * Preparation for the retrofit of container locks in front of the front wall * Bolted smooth steel front wall * Fold-down sidewalls made from trapezoidal steel sheeting with board hoist * Steel rear wall can be inserted between the ramp mounts and stowed inside in front of the front wall when not in use * Bolted rear stakes * Rear slope approx. 860 mm ----Load Securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Optional installation of 3 t drop lashing rings every 600 mm * One 6.3 t lashing ring in each of the front and rear corners * Various 1.2 t lashing options in the front and rear cross-members ----Ramps: * Single-piece mechanical grating ramps with spring mechanism for one-person operation, approx. 2,750 x 600 mm (can be telescoped to 20 mm) ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, front wall, rear wall, tailgate, and ramps * Sideboard color in RAL 9010 pure white * Sidewall painting in another RAL color available at extra cost Lasdpfepk Dv Rsx Agqjg ----Information: * --Reinforced and certified body according to EN 12642 XL incl. load securing certificate-- * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex works Egestorf

Condition: new, maximum load weight: 13,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 700 mm, Year of construction: 2026, * KA-TA-RT 18.0: ----Brakes: * EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Suspension: * Air suspension with lifting and lowering device, including RtR valve and manual lowering option for loading operations Ljdpjvin T Sefx Agqjag ----Drawbar / Flange Drawbar Eye: * Drawbar with positive-fit height adjustment * 50 mm flange drawbar eye ----Electrics / Lighting: * 15-pin 24 V electrical system * LED tail lights 12 / 24 V integrated into the underrun protection ----General Attachments: * Landing gear at the front * Outward folding support legs at the rear * Plastic toolbox – approx. 750 x 350 x 300 mm, mounted on the right side * Plastic quarter mudguards ----Tipping Body: * Steel pallet 3-way tipper body made of fine grain steel with high M-Strong drop sides and reinforced 180 bar tipping cylinder * Fixed front wall made from smooth sheet metal * Hardwood battens for bucket support mounted on the front wall * Continuous sidewalls – without centre stanchion – foldable with drop side spring lifter and swinging mechanism via manual central locking * Bolted rear posts * Combined steel wing door rear wall, two-part, split asymmetrically, swingable up to 270° and lockable, not foldable. Includes additional swinging frame for automatic tailgate opening when tipping; locking via galvanized rotating bar lock and central locking. Deactivation function for automatic tailgate opening when reverse tipping with open wing door * 4 mm steel floor plate * Two-step step on the left front * Ramp mounting rail at the rear ----Load Securing: * Each corner fitted with 1 x 7 t lashing ring * Each side equipped with 4 x 3 t lashing eyes recessed in the outer frame ----Loading Ramps: * Ramp mounting compartment integrated at the rear of the chassis * 1 pair of aluminum loading ramps (10 t/pair), approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: * Chassis, drawbar, rear posts, front wall, tipping bed, underrun protection, and rear folding supports hot-dip galvanized * Drop side paint finish in any RAL color shade of your choice (special or metallic paints excluded); color can be changed up to approx. 6 weeks prior to completion * Axles, air tanks, flange drawbar eye, and front landing gear painted in black ----Information: * --Load securing certificate according to EN 12642 XL? * Subject to errors and prior sale ----Delivery Time: * Available from approx. CW 45/2026

Condition: new, maximum load weight: 13,600 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 700 mm, Year of construction: 2026, * KA-TA-RT 18.0: ----Brakes: * EBS (Electronic Braking System) * Emergency release device for spring-loaded cylinders * Drum brakes ----Suspension: * Air suspension with lift and lowering system, including RtR valve and manual lowering for loading processes ----Drawbar / Flange Drawbar Eye: * Drawbar with force-locking height adjustment * 50 mm flange drawbar eye ----Electrics / Lighting: * 15-pin 24 V connector * LED tail lights 12 / 24 V integrated into the underrun protection ----General Attachments: * Support winch at the front * Externally mounted folding supports at the rear * Plastic toolbox approx. 750 x 350 x 300 mm, mounted on the right side * Plastic quarter mudguards ----Tipping Platform: * Three-way tipper platform made of high-strength steel with high M-Strong side boards and reinforced 180 bar tipping cylinder * Fixed smooth sheet steel front wall * Hardwood pad for excavator bucket, bolted to front wall * Continuous side walls (no central stanchion), foldable with board spring lift and swiveling via manual central locking * Rear stanchions bolted * Combination steel tailgate—2-winged, asymmetrically split, swiveling by 270° and lockable (not foldable), with additional pendulum frame for automatic tailgate opening during tipping. Locking via galvanized turning bar lock and central locking. Deactivation function for automatic tailgate opening when tipping backwards with opened tailgate. * 4 mm steel floor plate Lodpfxovin Uce Agqoag * Two-step access on front left * Ramp holder at the rear for drive-on ramps ----Load Securing: * Each corner equipped with 1 x 7 t lashing point * Each side equipped with 4 x 3 t recessed lashing rings in the outer frame ----Drive-on Ramps: * Recessed storage compartment in the chassis at the rear for ramps * 1 pair of aluminum drive-on ramps (10 tons/pair), approx. 3,570 x 410 mm, suitable for rubber-tired and tracked vehicles ----Paintwork: * Chassis, drawbar, rear stanchions, front wall, tipper platform, underrun protection, and rear folding supports hot-dip galvanized * Side wall paintwork in any RAL color of choice (no special or metallic finishes), color may be changed up to approx. 6 weeks before completion * Axles, air reservoirs, flange drawbar eye, and front support winch painted in black ----Info: * --Load securing certificate according to EN 12642 XL? * Subject to errors and prior sale ----Delivery Time: * Available from approx. week 45 / 2026

Condition: new, maximum load weight: 8,870 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-ER 11.9: ----Brakes: * Electronic braking system (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t Gigant axle system ----Suspension: * Parabolic springs with equalizer unit ----Drawbar / Flange Eye: * Height-adjustable drawbar, adjustable by 300 mm * 40 mm flange eye ----General Attachments: * Jost mechanical landing gear at the front * Externally mounted, hot-dip galvanized folding support legs at the rear * Side underrun protection * Quarter fenders made of plastic * Plastic toolbox mounted front right on the bulkhead ----Electrics / Lighting: * Tire pressure monitoring system (TPMS) * 15-pin power connector * LED tail lights ----Loading Area: * 50 mm softwood floor * 20" container locks mounted at front and rear * Bolted smooth sheet bulkhead * Drop side walls made of profiled steel plate, trapezoidal, foldable with board wall spring assist * Bolted, hot-dip galvanized rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing capacity every 480 mm * Option to install 3 t folding lashing shackles every 600 mm (5 lashing rings each side installed) * In each of the front and rear corners, 1 x 6.3 t lashing ring Ledpfxjl Tilxo Agqjag * Various holes in the front bulkhead and end beam for 1.2 t lashing points ----Ramps: * 1 pair of aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Rear storage compartment below the loading surface, integrated into the chassis ----Paintwork: * Hot-dip galvanized chassis as well as drawbar, bulkhead, and rear wall * Side wall color RAL 9010 pure white * Painting of the side walls in any RAL color available at additional cost ----Information: * New vehicle, unregistered * Errors and prior sale excepted ----Delivery Time: * Immediately available ex Egestorf

Condition: new, maximum load weight: 8,410 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, Year of construction: 2025, * KA - TA - R 11.9 ----Braking System: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 5.5 t BPW axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Flange Eye: * Height-adjustable drawbar (300 mm range) with 40 mm flange towing eye ----Electrics / Lighting: * Tire pressure monitoring with in-cab display via EBS signal – no installation required on the truck side * 15-pin power connector Lasdpfx Agexf Skvjqog * LED lighting system, 12/24 V * 2 LED reversing lights at the rear (activated via reverse gear) ----General Attachments: * Mechanical BPW landing gear at the front * 2 mechanical folding supports at the rear * Plastic toolbox, approx. 750 x 350 x 300 mm, mounted on the right side of the chassis at the front * Bolt-on underrun protection * Plastic quarter mudguards * Two-step access in front of the bulkhead, driver’s side ----Chassis: * Chassis made of fine-grain steel ----Tipping Body: * Net hooks at each central locking bearing and two on the bulkhead * Steel palletised 3-way tipper body with reinforced 600 mm heavy-duty drop sides * Continuous top side walls with internal tube reinforcement – no central stanchions – foldable with drop side spring assist * Rear stanchions bolted * Combination steel double-wing rear doors, asymmetrically split, swivel 270° and lockable (not foldable) with additional swing frame for automatic tailgate opening during tipping * Locking via galvanized rotary bar lock at the rear and central locking * Deactivation function for automatic tailgate during reverse tipping with opened wing doors * Mounting rail at the rear for loading ramps ----Load Securing: * 1 x 5 t lashing point in each corner and 4 x 3 t lashing eyes recessed in the side outer frame * 4 mm floor plate made of S 420 MC 4 fine-grain steel ----Ramps: * 1 pair of aluminum loading ramps (approx. 3,310 x 400 x 105 mm, load capacity 8 t/pair), suitable for rubber-tired and tracked vehicles * Lockable storage compartment under the loading area at the rear of the chassis ----Paintwork: * Chassis, drawbar, tipper body, bulkhead, underrun protection, rear stanchions, rear folding supports, and access step galvanized * Side walls and tailgate painted in RAL 3003 ruby red * Axles, springs, air tanks, and landing gear painted in a shade of black ----Information: * Reinforced body with load securing certificate according to EN 12642 XL * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available immediately ex works Egestorf

Condition: new, maximum load weight: 38,620 kg, overall weight: 50,000 kg, axle configuration: > 3 axles, Year of construction: 2026, T5 Profile 50.0: ----Brakes: * Wabco EBS (electronic braking system) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 5 x 11 t Gigant axles * 3rd axle liftable (ride height +30 mm when lifted) * Last axle steerable (locking of trailing axle can be performed from the cab for maneuvering purposes, without installation on the truck side, as well as additionally by switch on the trailer); lock must be disengaged before driving on public roads * Forced lifting and forced lowering of the lift axle for maneuvering purposes (truck-side installation required) with speed-dependent control via the EBS electronics ----Suspension: * Air suspension, lifting and lowering system with RtR valve ----Drawbar: * Drawbar 1,500 mm long with 50 mm towing eye and manual height adjustment ----Electrics / Lighting: * Smartboard as infotool with pressure sensors to display total axle load per axle group * Tire pressure monitoring with display option in the truck via EBS signal (no truck-side installation required) * LED lighting system 12/24 V * Removable LED beacon (rear) ----General Attachments: * Mechanical warning sign package for 3 m total width * Toolbox made of galvanized steel sheet approx. 650 x 300 x 600 mm, mounted left side * Plastic wheel arches front axle and galvanized steel sheet mudguards on rear axle ----Low Loader Platform: * Turntable platform extension with 45° corners and 3 storage compartments with lockable folding lids (lids open to the rear) * Shortened low bed platform by 500 mm to 6,280 mm including extended stepped transition 500 mm forwards * Rubber covering on foldable frame, approach slope, and on the running surface of the low loader platform * Bamboo wood between the longitudinal beams in front of the excavator stick holder ----Load Securing (LaSi Package): * 2 x 6.4 t lashing rings at the front corners * 2 x 13.4 t UVV-compliant lashing points each at the front and rear side corners * 5 x 10 t UVV-compliant lashing rings per side (swiveling and lowerable, loadable in all directions) * 4 stake pockets per side, also 2 t lashing capability * 1 x 16 t UVV-compliant lashing point on the rear cross member ----Widening: * Extendable and foldable widening outriggers for 3 m overall width (board bracket holder under chassis, right side) ----Excavator Stick Holder: * Continuous excavator stick holder with reinforced profile from last axle to end beam, approx. L=2,350 x W=770 x H=270 mm, 2 pairs of 6.4 t UVV-compliant lashing rings on the sides of the stick holder ----Ramps: * Hydraulic folding ramp with double-acting hydraulics and extendable tip section, approx. 4,650 x 720 mm incl. load-holding valves and hydraulic side shift Laedpfx Ajxptn Dsgqjg ----Rear Support: * Hydraulic rear support ----Hydraulics: * Hydraulic flow divider (for hydraulic pump outputs in the truck above 40 l/min, max. 140 l/min) ----Loading Height: * Loaded: 890 mm +/- 20 mm (via air suspension) ----Loading Area Dimensions: * Deck above turntable: 2,600 + 390 x 2,520 mm * Low bed area: 6,280 + 500 x 2,520 mm incl. 860 mm approach slope ----Paintwork: * Chassis, bogie, drawbar, extension consoles, access ramps hot-dip galvanized * Towing fork, axles, hydraulic axle supports, as well as air tanks painted in black ----Information: * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery Time: Immediately available*

Condition: used, maximum load weight: 12,080 kg, overall weight: 14,400 kg, axle configuration: 2 axles, first registration: 06/2024, loading space length: 3,900 mm, loading space width: 1,920 mm, loading space height: 415 mm, Year of construction: 2022, Equipment: ABS, * ETM-TA 14.4: ----Brakes: * Wabco ABS braking system * Emergency release system for spring brake cylinders * Drum brakes ----Axles: * 2 x 7 t Gigant axles ----Suspension: * Parabolic springs with tandem equalization unit ----Drawbar / Coupling Eye: * Height-adjustable drawbar (+/- 150 mm) * 40 mm bolted coupling eye ----General Attachments: * Jost support winch at the front * Side underride protection * Foldable A-sign at the rear ----Electrics / Lighting: * 15-pin power connector * Multi-chamber tail lights ----Body: * Fixed steel front and side walls * Removable steel rear wall * Floor made of 50 mm softwood * 1 sliding steel plate (750 x 1,000 mm) at the front incl. 2 removable trough stops at the front, insertable in 2 positions * Rear cross member designed for aluminum loading ramps incl. 2 additional drop supports at the rear ----Loading Edge: * Unloaded loading edge approx. 710 mm ----Load Securing: * 4 removable trough stops, can be inserted in 2 positions for lateral centering of troughs * Each side with 1 x (13.5 t) UVV lashing point for securing devices * 2 ratchet tensioners (spindle adjustment) with compensation chain and quick shortener (tension force 6,300 kg) ----Tyres: * Tyre size: 285/70R19.5 ----Wheelbase: * Wheelbase: 1,140 mm ----Paintwork: * Chassis, front wall, side walls, mudguards, drawbar, rear drop supports hot-dip galvanized * Axles, springs, support winch, air tank painted in black ----General Information: * Vehicle has a single-day registration in 06/2024, due to missing tire pressure monitoring system and has not been loaded/used * Subject to errors and prior sale ----Delivery Time: Ljdpfx Agel Th Eyeqeag * Immediately available from Egestorf on the A7

Condition: new, maximum load weight: 10,360 kg, overall weight: 14,400 kg, axle configuration: 2 axles, loading space length: 6,270 mm, loading space width: 2,470 mm, loading space height: 400 mm, Year of construction: 2025, * ETÜ-TA-ER 14.4: ----Brakes: * Electronic Braking System (EBS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * Gigant axles ----Suspension: * Air suspension with lifting and lowering function ----Drawbar / Flange Towing Eye: * Drawbar height adjustable by 300 mm * 40 mm flange towing eye ----Electrics / Lighting: * Tire Pressure Monitoring System (TPMS) with display capability in the truck via EBS signal, no truck-side installation required * LED lighting system * 15-pin power connector ----General Attachments: * Jost landing gear at the front * Externally mounted, hot-dip galvanized, folding rear supports * Plastic toolbox mounted on the front right exterior of the bulkhead * Lateral underrun protection * Plastic quarter mudguards ----Low Loader Platform: * 50 mm softwood flooring * Pre-installed fittings for later mounting of 20" container locks front and rear * Bolted smooth sheet steel front wall * Trapezoidal profile steel sheet side walls, foldable with drop side spring assist * Bolted, hot-dip galvanized rear stanchions ----Load Securing: * Perforated outer frame, approx. 45° bent, with 2 t lashing force every 480 mm * Installation of 3 t folding lashing rings every 600 mm possible * One 6.3 t lashing ring in each front and rear corner * Various holes in the front and rear cross members for 1.2 t lashing options ----Ramps: * 1 pair aluminum loading ramps, approx. 3,310 x 400 mm (load capacity 8 t / pair), suitable for rubber-tired and tracked vehicles, stowed from the rear in a compartment recessed under the loading area in the chassis Lajdpfx Agondpn Ssqog ----Painting: * Hot-dip galvanized chassis, drawbar, front wall and rear wall * Complete vehicle hot-dip galvanized ----Info: * New vehicle with manufacturer's warranty * Subject to alteration and prior sale ----Delivery Time: * Available immediately ex Egestorf

Condition: used, maximum load weight: 14,300 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 07/2023, next inspection (TÜV): 11/2026, Year of construction: 2023, * HL - TA 20.0 ----Brakes: * Wabco EBS-E braking system * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake coupling ----Axle: * 2 x t SAF axles Laodpfex Dp Agsx Agqeg * 1st axle as lift axle (fully automatic) * Lift axle with +30 mm driving height via adjustment cylinder * Starting aid for shunting and forced lowering onto the first axle - controlled via speed-dependent EBS electronics - (no installation required on the truck side, additionally with cable for operation from the tractor) ----Air suspension: * Air suspension with lowering function via remote control ----Drawbar / Flange Towing Eye: * 50 mm flange-type adjustable towing eye - height adjustable by +77 mm and -33 mm - for 2 t support load ----Electrics / Lighting: * 15-pin power plug * 3-pin 12V auxiliary plug * LED lighting system 12 / 24V * 2 LED reversing lights operated via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connection cables for agricultural and forestry vehicles * Power supply for remote control 12+24 V via taillight ----General Attachments: * BPW landing gear at the front * Mechanically extendable underrun protection for container lengths over 6,000 mm * Speedline diamond aluminum rims * Pin-type tow coupling (use only when underrun protection is retracted) * Enclosed plastic half-shell single wheel mudguards * Two-step access ahead of the front wall on the left-hand side * Shovel and broom holder ahead of the front wall * 2 stainless steel toolboxes (matte finish), approx. 650 x 350 x 320 mm, right side * Enclosed side underrun protection usable as advertising surface ----Hydraulics: * 2-circuit hydraulic connectors (engine side from truck/tractor), rated for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted right front) operated via remote control ----Hooklift: * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (Serial No. 100746129, year 2023) * Base frame made of high-strength fine-grain steel * 20,000 kg pulling force * Hook height 1,570 mm * Hooklift operation via remote control * Remote with fast feed for unloading, but not for lifting * Emergency stop switches on left and right sides * Container support with four side supports and one roller at the rear on each side * Hydraulic rear interior locking * 2 additional hydraulic cylinders to assist main boom lifting * 2 x mechanical drop-down supports at the rear * Approval for 20 t gross weight (2 x 9 t axles) and 2 t support load * Note: If the remote control is outside the charging cradle, the service brake must be applied to activate the remote. Brake connections must remain connected at all times to open the hydraulic/pneumatic control valves * Monitoring system for underrun protection ensuring it is retracted during tipping ----Loading Height: * Unladen: approx. 1,300 mm with lowered lift axle ----Coating: * Chassis, drawbar, access steps, underrun protection, and drop-down supports hot-dip galvanized * Axles, air tanks, front landing gear painted black * Palfinger hooklift painted black/yellow ----Information: * Errors and prior sale excepted * Vehicle is in very good / as-new condition ----Delivery Time: * Vehicle is immediately available

Condition: used, maximum load weight: 14,300 kg, overall weight: 20,000 kg, axle configuration: 2 axles, first registration: 07/2023, next inspection (TÜV): 11/2026, Year of construction: 2023, * HL - TA 20.0 ----Brakes: * Wabco EBS-E brake system * Emergency release device for spring-loaded cylinders * Drum brakes * Duomatic brake connector ----Axles: * 2 x tons SAF axles * 1st axle is a lift axle (fully automatic) * Lift axle with +30 mm driving height via actuator cylinder * Start-off assistance for shunting and forced lowering on the first axle – controlled via speed-dependent EBS electronics (no truck-side installation required, additionally with cable for operation in the tractor) ----Air Suspension: * Air suspension with lowering function via remote control ----Drawbar / Flange-Towing Eye: * 50 mm flange bolt towing eye – height adjustable by +77 mm and -33 mm – for 2 t vertical load ----Electrics / Lighting: * 15-pin power connector * 3-pin 12V auxiliary connector * LED lighting system 12 / 24V * 2 LED reversing lights activated via reverse gear * EBS multi-voltage system for towing vehicles with 12 & 24V electrics * Extended connection cables for agricultural and forestry vehicles * Power supply for remote control 12+24 V via tail lights ----General Attachments: * BPW landing leg at the front * Mechanical extendable underrun protection for container lengths over 6,000 mm * Speedline diamond aluminium rims * Locking pin tow coupling (use only when underrun protection is retracted) * Closed plastic half-shell single fenders * Two-step access in front of the front bulkhead on the left * Shovel and broom holder in front of the front bulkhead * 2 stainless steel toolboxes – matte – approx. 650 x 350 x 320 mm, mounted on the right side * Closed side underrun protection usable as advertising space ----Hydraulics: * 2-circuit hydraulic connectors (powered from truck/tractor) designed for 180 bar (tractor operation) * Double-acting control circuit for hydraulic tailgate (mounted front right) with control via remote control ----Hooklift: Lodjx Dp Atopfx Agqsag * Palfinger PHT 20 SCASNSLD5 telescopic hooklift (serial no. 100746129, year 2023) * Base frame made of high-strength fine-grain steel * 20,000 kg lifting capacity * Hook height 1,570 mm * Hooklift control via remote control * Remote control with fast function when unloading, but not when pulling on * Emergency stop switches left and right * Container bed with four supports on each side and one roller each at the rear * Hydraulic rear inner locking * 2 additional hydraulic cylinders for assisting the lifting of the main arm * 2 x mechanical drop-down supports at the rear * Approved for 20 t gross vehicle weight (2 x 9 t axles) and 2 t vertical load * Note: If the remote control is outside the charging cradle, the service brake must be applied so the remote is enabled. The brake connections must remain connected to enable hydraulic/pneumatic valve actuation. * Monitoring system for underrun protection to ensure it is retracted during tipping ----Load Height: * Unloaded approx. 1,300 mm with lowered lift axle ----Paintwork: * Chassis, drawbar, access steps, underrun protection, and drop-down supports are hot-dip galvanized * Axles, air tanks, front landing leg painted in black * Palfinger hooklift painted black/yellow ----Information: * Errors and prior sale reserved * Vehicle is in very good / as new condition ----Delivery Time: * Vehicle is available immediately

Condition: new, maximum load weight: 17,650 kg, overall weight: 24,000 kg, axle configuration: 3 axles, loading space length: 9,230 mm, loading space width: 2,480 mm, Year of construction: 2026, * TP 30.0 with 3 cable drum supports ----Braking system: * Wabco TEBS (electronic braking system) * Emergency release mechanism for spring brake cylinders * Drum brakes ----Axles: Lsdpfx Ajx Nli Nogqjag * 3 x 11 t Gigant axles ----Suspension: * Air suspension 17.5" with lifting and lowering device ----Drawbar: * Drawbar 1,800 mm long with 40 mm towing eye ----Electrics / Lighting: * Tire pressure monitoring with display capability in the truck dashboard via EBS signal -without truck-side installation- * 15-pin power connector * 2 additional LED reversing lights (activated via reverse gear) * LED lighting ----General attachments: * Aluminum air tank * Stainless steel side-mounted toolbox approx. 1,000 x 300 x 600 mm * Side underrun protection * Plastic quarter mudguards * Underride guard ----Flatbed: * Zurr-fix external frame, 45° angled with hole pattern for lashing equipment, lashing capacity per lashing point 2,000 kg at a spacing of 480 mm * Installation of 3,000 kg drop lashing brackets at approx. 600 mm intervals possible - delivery includes 12 x 3,000 kg lashing brackets per side * 5 pockets per side for stake posts 100 x 50 mm in the outer frame -stake posts not included in delivery- * 30 mm phenolic plywood flooring ----Drum supports: * 3 galvanized drum supports secured by container locks, with lateral forklift pockets, center/center 800 mm apart (pocket width 185 mm) * Maximum drum diameter 2,600 mm and maximum drum width 1,650 mm * Clear width between the support arms approx. 1,775 mm, with cross connection * Maximum drum weight per cable drum support 6,000 kg * Without drive and drum brake * Support arm with clamp lock for securing the drum shaft * Steel drum shaft 76 mm diameter with centering and rotatable ends * 2 stop rings * 2 centering cones made of polyamide * 4 x 3.2 t lashing eyes on the support arms for customer-side securing of the drum against rotation and unwinding ----Loading height: * Loaded approx. 1,040 mm ----Paintwork/Finish: * Chassis, turntable, drawbar, outer frame, underride guard hot-dip galvanized * Axles painted in a shade of black ----Information: * Technical upgrade to 30 t GVW possible * New vehicle with manufacturer’s warranty * Subject to errors and prior sale ----Delivery time: * Available from calendar week 51 / 2026

Condition: new, maximum load weight: 38,290 kg, overall weight: 48,000 kg, axle configuration: 3 axles, loading space length: 8,500 mm, loading space width: 2,520 mm, Year of construction: 2026, * TS 3 Profile 30.0: ----Brakes: Lajdpfx Agey Ngz Hoqjg * Wabco EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders * Drum brakes ----Axles: * 3 x 11 t BPW Eco Plus axles * Last axle steered, with electro-pneumatic steering lock ----Suspension: * Air suspension with lift and lower system and RtR valve ----Electrics / Lighting: * TPMS (Tire Pressure Monitoring System) * Smartboard control box mounted on the trailer as an info tool, with pressure sensors for total axle load display * 15-pin electrical connector * LED lighting system 12 / 24V * Removable LED beacon, left rear ----General attachments: * Side underrun protection * Landing legs at the front and mechanical swivel supports at the rear of the chassis * Straight steel mudguards * Spare wheel carrier under the chassis, right side ----Low-loader deck: * Saddle platform with 45° chamfered front corners and a front toolbox made of galvanized sheet steel, W = 2,480 x H = 500 x L = 665 mm, with folding lid * 400 mm high drop-side aluminum boards (RAL 9010 pure white), foldable and removable, on the sides of the saddle platform * Rear board – 150 mm high, slotted in * Rear slope on the saddle platform to the low-bed section, approx. 700 mm long * Saddle platform with 50 mm wooden planks and low bed with 60 mm wooden planks * Tread plate over the axles ----Widening: * 8 x mechanical folding extensions to 3 meters total width, not on the rear slope (widening planks available, stored on the saddle platform) * Mechanically adjustable warning panel sets front and rear ----Load securing (Lasi package): * On the saddle platform, 2 x 6.3 t lashing points each, as well as 3 x 5 t lashing bars each on the outside frame * On the low-bed platform, 2 x 13.4 t lashing rings on each side, as well as 4 x 10 t lashing rings, pivotable and lowerable, integrated into the outside frame * On each side, 2 x 6.4 t lashing eyes and one lashing point in the excavator arm trough at the rear * 2 x container locks directly after the gooseneck in the low bed platform ----Excavator arm trough: * Excavator arm trough starting from the end of the last fixed axle, over the steering axle up to the rear cross member, continuous with internal reinforcement profiles, approx. L = 2,450 x W = 770 mm x D = 270 mm ----Ramps: * Mechanically operated one-piece, hot-dip galvanized hydraulic ramps, approx. 3,000 x 720 mm (mechanically adjustable in width) * 4-way control block for later customer-side retrofit of hydraulic ramp shifting * The outer board of the ramp is made of 50 mm hardwood * Climbing strips on the outer frame of the ramp and on the approach slope * Rubber mat on the ramp and approach slope ----Hydraulics: * Hydraulic flow divider in the trailer (for hydraulic pump output in truck over 40 l up to 120 l/min) ----Load dimensions: * Loading area of the saddle platform: approx. 3,935 x 2,480 mm * Low-bed loading area: approx. 8,500 x 2,520 mm * Loading height unladen about 910 mm (incl. 860 mm approach slope) ----Fifth wheel height: * Approx. 1,220 mm (suitable for 2- and 3-axle tractors) ----Paintwork: * Chassis, ramps, rear folding supports, widening consoles hot-dip galvanized * Axles, landing legs, air tanks painted black * Vehicle is hot-dip galvanized ----Info: * New vehicle with manufacturer's warranty * Errors and prior sale excepted * Example images may show equipment not included with the offered vehicle * Sample images ----Delivery time: * tba

Condition: new, maximum load weight: 13,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 7,000 mm, loading space width: 2,480 mm, Year of construction: 2026, * TRA-Kombi 18.0: * 3-in-1 = for skip, roll-off containers, and as a low loader ----Brake System: * RDÜ Tire Pressure Monitoring System * EBS-E (electronic braking system) * Emergency release device for spring-loaded cylinders ----Axles: * 2 x 12 t Gigant axles Ljdpfjl Thwcex Agqsag ----Suspension: * Parabolic springs ----Drawbar: * Pneumatically lowerable drawbar, 2,100 mm long * 40 mm towing eye and adjustable height mechanism ----Electrics / Lighting: * LED tail lights * 15-pin electrical connector * RDÜ (tire pressure monitoring), indication possible in the truck via EBS signal (no vehicle-side installation required) ----General Attachments: * Toolbox made of powder-coated sheet steel, mounted on the right side * Side underrun protection * Plastic quarter mudguards with spray protection * Storage box for container nets made of galvanized sheet metal, approx. 960 x 300 x 400 / 450 mm, right side * Rear plastic bumper pads * Mechanical drop-down supports at the rear ----Loading Area: * Hot-dip galvanized main frame with raised outer frame (approx. 25 mm higher) for guiding roll containers * Steel floor with recessed rollers in the bogie area * For roll-off container transport, container lengths from 5,500 to 7,000 mm possible * Pneumatic 4-point clamp locking system and mechanical removable front guide blocks in the track, load securing certificate according to DIN 30722-1 * Transport of up to 2 skip containers with max. 10 m³ volume possible * 8 repositionable skip stoppers for lateral centering of skips, front 4 stoppers inserted with pivoting stop * Weld bead as anti-slip coating in the approach ramp area ----Load Securing: * 3 pairs of 10 t UVV lashing rings on the sides for attaching tensioning devices for friction-locked and form-fit securing of skips * 4 cloverleaf-type lashing brackets on each side * 1 pair of 13.4 t UVV lashing rings at the front ----Ramps: * 1 pair of aluminum approach ramps (10.6 t/pair), 2,800 x 470 mm, suitable for rubber-tired and tracked vehicles (lockable storage compartment accessible from the rear) ----Info: * Load securing certificate according to DIN EN 12195-1, DIN EN 12640, DIN EN 12642 and VDI 2700 * Permissible gross weight technically up to 20,000 kg * New vehicle with manufacturer's warranty * Subject to errors and prior sale ----Delivery time: * Available from approx. calendar week 44 / 2026

Condition: new, maximum load weight: 6,870 kg, overall weight: 9,900 kg, axle configuration: 1 axle, Year of construction: 2026, * KWH 9.9 ML: ----Brakes: * EBS braking system * Drum brake * Emergency release device for spring-loaded cylinders ----Axle: * BPW axle ----Suspension: * Parabolic springs Laedpju I Iqfefx Agqjg ----Drawbar / Flange coupling: * Drawbar with 40 mm screw coupling (height-adjustable in mm) ----Electrical system / Lighting: * 15-pin power connector * LED lighting * Flashing LED side marker lights * TPMS (tire pressure monitoring system) ----General components: * Front support winch * Spring-supported square tube supports at the rear with base plate, safety locking pins for various support heights * Closed steel sheet fenders with splash guard * Closed side impact protection, usable as an advertising area * Plastic toolbox with base insert (horizontal installation), approx. 500 x 350 x 400 mm ----Superstructure: * Swiveling cable drum superstructure, width between the drum arms 1,700 mm, with clamping device for securing the drum at the ends of the support arms and a locking mechanism for the cable drum superstructure on the chassis by means of a centrally arranged claw lock * Motorized hydraulic drum drive with oil motor * Valves and adjustable, rubber-coated drive rollers * Hydraulic speed controller and brake for drum drive * Steel drum shaft with 76 mm diameter, centering, and rotatable ends * 1 pair of centering cones made of polyamide, stepped ----Chassis: * Chassis made of torsionally rigid square tubes and cross members ----Pump - Unit: * Hydraulic pump unit with Loncin gasoline engine, including manual and electric starter * Fuel tank and manual starter * 13 HP with gear pump (150 bar) ----Tires: * 315/80 R 22.5 ----Unladen weight: * 2,690 kg unladen weight ----Paint: * Vehicle is hot-dip galvanized ----Information: * New vehicle with full manufacturer's warranty * Errors and prior sale subject to change ----Delivery time: * Available from approximately week 41/2026

Condition: new, maximum load weight: 13,830 kg, overall weight: 18,000 kg, axle configuration: 2 axles, loading space length: 4,995 mm, loading space width: 2,380 mm, loading space height: 900 mm, Year of construction: 2026, * KA-TA-R 18 ----Brakes: * EBS-E (Electronic Braking System with RSS) * Emergency release device for spring brake cylinders * Drum brakes ----Axles: * 2 x 9 t Gigant axles ----Suspension: * Air suspension with automatic level control during tipping operation ----Electrics / Lighting: * Tire pressure monitoring system with display option in the truck display via EBS signal – without truck-side installation * 15-pin power connector * LED lighting with galvanized protective cover * 2 LED reversing lights ----Drawbar / Drawbar Eye: * Drawbar with 50 mm flange-type drawbar eye (adjustable by +77 mm and -33 mm using an offset plate) ----General Add-on Parts: * Landing gear at the front * Foldable galvanized steel underrun protection for paver feeding * Closed individual plastic mudguards * Front wall platform made of grating with access step at the drawbar and handrails on the front wall ----Chassis: * Chassis made of high-tensile steel ----Tipper Body: * Steel three-way tipping body with asymmetrical continuous aluminum side walls (without central stanchion) – pendulum-mounted via manual central locking and folding on the left side with drop-side spring balancer * Rear wall made of HBW 400 steel – pendulum-mounted with automatic 2-jaw lock * 5 mm steel floor made of HBW 450 steel ----Load Securing: * 4 each side (total 8) 3 t recessed and foldable lashing rings embedded in the steel floor Ljdpjx Ipbyofx Agqoag ----Tarpaulin: * Roll tarpaulin – agate grey similar to RAL 7038 * Tarpaulin tensioning via ratchet tensioners on the sides and tensioning rubber at front and rear ----Painting: * Chassis, underrun protection, and drawbar hot-dip galvanized * Axles, air reservoirs, landing gear, flange drawbar eye painted in black * Side wall painting in a RAL color of your choice (not including special or metallic paints), can be changed up to approx. 6 weeks prior to completion ----Information: * Reinforced and certified body according to EN 12642 XL including load securing certificate up to 19 t * New vehicle without initial registration with manufacturer’s warranty * Errors and interim sale reserved * Sample images (pictures of the actual vehicle may differ due to optional equipment) ----Delivery time: * Vehicle available from calendar week 42/2026